/***************************************************************************** * Filename: Regconst.h * * Author: Ziglioli Marco * * Date: 23/03/2001 * * Description: Symbolic constant names of registers used in STC and on board * *****************************************************************************/ #ifndef _MY_REGCONST_H_ #define _MY_REGCONST_H_ //DAQ STC registers (see file REG-DES.txt for bitfield description) #define WIN_ADDR_REG (0x00) * 2 //Write-only #define WIN_DATA_WR_REG (0x01) * 2 //Write-only #define WIN_DATA_RD_REG (0x01) * 2 //Read-only #define INTERRUPT_A_ACK 0x02 //Write-only #define AI_STATUS_1 0x02 //Read-only #define INTERRUPT_B_ACK 0x03 //Write-only #define AO_STATUS_1 0x03 //Read-only #define AI_COMMAND_2 0x04 //Write-only #define G_STATUS 0x04 //Read-only #define AI_STATUS_2 0x05 //Read-only #define AO_COMMAND_2 0x05 //Write-only #define AO_STATUS_2 0x06 //Read-only #define G0_COMMAND 0x06 //Write-only #define DIO_PARALLEL_INPUT 0x07 //Read-only #define G1_COMMAND 0x07 //Write-only #define AI_COMMAND_1 0x08 //Write-only #define G0_HW_SAVE_HI 0x08 //Read-only #define AO_COMMAND_1 0x09 //Write-only #define G0_HW_SAVE_LO 0x09 //Read-only #define DIO_OUTPUT 0x0A //Write-only #define G1_HW_SAVE_HI 0x0A //Read-only #define DIO_CONTROL 0x0B //Write-only #define G1_HW_SAVE_LO 0x0B //Read-only #define AI_MODE_1 0x0C //Write-only #define G0_SAVE_HI 0x0C //Read-only #define AI_MODE_2 0x0D //Write-only #define G0_SAVE_LO 0x0D //Read-only #define AI_SI_LOAD_A_HI 0x0E //Write-only #define G1_SAVE_HI 0x0E //Read-only #define AI_SI_LOAD_A_LO 0x0F //Write-only #define G1_SAVE_LO 0x0F //Read-only #define AI_SI_LOAD_B_HI 0x10 //Write-only #define AO_UI_SAVE_HI 0x10 //Read-only #define AI_SI_LOAD_B_LO 0x11 //Write-only #define AO_UI_SAVE_LO 0x11 //Read-only #define AI_SC_LOAD_A_HI 0x12 //Write-only #define AO_BC_SAVE_HI 0x12 //Read-only #define AI_SC_LOAD_A_LO 0x13 //Write-only #define AO_BC_SAVE_LO 0x13 //Read-only #define AI_SC_LOAD_B_HI 0x14 //Write-only #define AO_UC_SAVE_HI 0x14 //Read-only #define AI_SC_LOAD_B_LO 0x15 //Write-only #define AO_UC_SAVE_LO 0x15 //Read-only #define AI_SI2_LOAD_A 0x17 //Write-only #define AO_UI2_SAVE 0x17 //Read-only #define AI_SI2_LOAD_B 0x19 //Write-only #define AI_SI2_SAVE 0x19 //Read-only #define G0_MODE 0x1A //Write-only #define AI_DIV_SAVE 0x1A //Read-only #define G1_MODE 0x1B //Write-only #define JOINT_STATUS_1 0x1B //Read-only #define DIO_SERIAL_INPUT 0x1C //Read-only #define G0_LOAD_A_HI 0x1C //Write-only #define G0_LOAD_A_LO 0x1D //Write-only #define JOINT_STATUS_2 0x1D //Read-only #define G0_LOAD_B_HI 0x1E //Write-only #define G0_LOAD_B_LO 0x1F //Write-only #define G1_LOAD_A_HI 0x20 //Write-only #define G1_LOAD_A_LO 0x21 //Write-only #define G1_LOAD_B_HI 0x22 //Write-only #define G1_LOAD_B_LO 0x23 //Write-only #define G1_INPUT_SELECT 0x25 //Write-only #define G0_INPUT_SELECT 0x24 //Write-only #define AO_MODE_1 0x26 //Write-only #define AO_MODE_2 0x27 //Write-only #define AO_UI_LOAD_A_HI 0x28 //Write-only #define AO_UI_LOAD_A_LO 0x29 //Write-only #define AO_UI_LOAD_B_HI 0x2A //Write-only #define AO_UI_LOAD_B_LO 0x2B //Write-only #define AO_BC_LOAD_A_HI 0x2C //Write-only #define AO_BC_LOAD_A_LO 0x2D //Write-only #define AO_BC_LOAD_B_HI 0x2E //Write-only #define AO_BC_LOAD_B_LO 0x2F //Write-only #define AO_UC_LOAD_A_HI 0x30 //Write-only #define AO_UC_LOAD_A_LO 0x31 //Write-only #define AO_UC_LOAD_B_HI 0x32 //Write-only #define AO_UC_LOAD_B_LO 0x33 //Write-only #define AO_UI2_LOAD_A 0x35 //Write-only #define AO_UI2_LOAD_B 0x37 //Write-only #define CLOCK_AND_FOUT 0x38 //Write-only #define IO_BIDIRECTION_PIN 0x39 //Write-only #define RTSI_TRIG_DIRECTION 0x3A //Write-only #define INTERRUPT_CONTROL 0x3B //Write-only #define AI_OUTPUT_CONTROL 0x3C //Write-only #define ANALOG_TRIGGER_ETC 0x3D //Write-only #define AI_START_STOP_SELECT 0x3E //Write-only #define AI_TRIGGER_SELECT 0x3F //Write-only #define AI_DIV_LOAD_A 0x40 //Write-only #define AI_SI_SAVE_HI 0x40 //Read-only #define AI_SI_SAVE_LO 0x41 //Read-only #define AI_SC_SAVE_HI 0x42 //Read-only #define AO_START_SELECT 0x42 //Write-only #define AI_SC_SAVE_LO 0x43 //Read-only #define AO_TRIGGER_SELECT 0x43 //Write-only #define G0_AUTOINCREMENT 0x44 //Write-only #define G1_AUTOINCREMENT 0x45 //Write-only #define AO_MODE_3 0x46 //Write-only #define GENERIC_CONTROL 0x47 //Write-only #define JOINT_RESET 0x48 //Write-only #define INTERRUPT_A_ENABLE 0x49 //Write-only #define SECOND_IRQ_A_ENABLE 0x4A //Write-only #define INTERRUPT_B_ENABLE 0x4B //Write-only #define SECOND_IRQ_B_ENABLE 0x4C //Write-only #define AI_PERSONAL 0x4D //Write-only #define AO_PERSONAL 0x4E //Write-only #define RTSI_TRIG_A_OUTPUT 0x4F //Write-only #define RTSI_TRIG_B_OUTPUT 0x50 //Write-only #define RTSI_BOARD 0x51 //Write-only #define WRITE_STROBE_0 0x52 //Write-only #define WRITE_STROBE_1 0x53 //Write-only #define WRITE_STROBE_2 0x54 //Write-only #define WRITE_STROBE_3 0x55 //Write-only #define AO_OUTPUT_CONTROL 0x56 //Write-only #define AI_MODE_3 0x57 //Write-only //Analog Input Registers Group #define ADC_CONFIG_HI 0x12 //Write-only #define ADC_CONFIG_LO 0x10 //Write-only #define ADC_DATA_READ 0x1C //Read-only //Analog Output Registers Group #define DAC_CONFIG 0x16 //Write-only #define DAC_FIFO 0x1E //Write-only #define DAC0_DATA 0x18 //Write-only #define DAC1_DATA 0x1A //Write-only /*PPI OKI82C55A MSM registers: Finally I found this walues writing a cycle which scanned board registers and check for some test lines value. I don't know why but these aren't unique right values. Also 19 1B 1D 1F and 59 5B 5D 5F and 99 9B 9D 9F work so if you have collision problems with other address try to change these values. */ #define PPI_PORT_A 0xD9 //PORT_A of 8255 #define PPI_PORT_B 0xDB //PORT_B of 8255 #define PPI_PORT_C 0xDD //PORT_C of 8255 #define PPI_CFG_REG 0xDF //Configuration Register #endif /*End of file: regconst.h*/