Subversion Repositories shark

# Copyright (c) 2007 Fabio Checconi <fabio@gandalf.sssup.it>

#

# This is a non-recursive makefile that supports a Kbuild-like syntax

# for input/output specification.

# Handle the V=0|1 option.  We use both a long and a short form.  In

# the short one we use the $(Q) variable prepended to shell commands

# (e.g., $(Q)mkdir) that in quiet mode expands to @, and in verbose

# mode expands to nothing.  In the long one we have a couple of strings

# per command, one named quiet_cmd, the other cmd, and we always echo

# $(QS)cmd, so if $(QS) expands to quiet_ the first string is printed.

# The first string is the quiet version of the command, the second one

# holds the whole command.

ifneq ($(V),1)

	Q:=@

	QS:=quiet_

endif

# Handle the make -s flag: produce no output at all...

ifneq ($(findstring s,$(MAKEFLAGS)),)

	Q:=@

	QS:=nothing_

endif

# The variables used to generate the rules to build targets.  Use

# CROSS_COMPILE to specify the prefix to be used for the toolchain.

ar:= $(CROSS_COMPILE)$(AR)

as:= $(CROSS_COMPILE)$(CC)

cc:= $(CROSS_COMPILE)$(CC)

ld:= $(CROSS_COMPILE)$(LD)

rm:= $(if $(RM),$(RM),rm)

install:= $(if $(INSTALL),$(INSTALL),install)

# As in the rules we cannot use the variables we use in the makefile,

# because we reassign them for every directory we visit, we just try

# to recover the information from the targets being built.  Another

# way could have been to expand the variables when generating the

# rules, but it would have made rule generation unreadable.

in-local:= $$(subst $$(srctree)/,,$$<)

out-local:= $$(subst install-,,$$(subst $$(objtree)/,,$$@))

in-objs:= $$(filter %.o,$$^)

in-objs-local:= $$(filter %.o,$$(subst $$(objtree)/,,$$^))

# The rule patterns, in quiet and in verbose form.  The verbose form is

# used also for the actual command.

quiet_ar_cmd	:= '  AR\\t$(out-local) $(in-objs-local)'

ar_cmd		:= $(ar) cr $$@ $(in-objs)

quiet_cc_cmd	:= '  CC\\t$(in-local)'

cc_cmd		:= $(cc) $$(cflags-$$(<:.c=.o)) $$(cppflags-$$(<:.c=.o)) \

			-c $$< -o $$@

quiet_as_cmd	:= '  AS\\t$(in-local)'

as_cmd		:= $(as) $$(aflags-$$(<:.s=.o)) -c $$< -o $$@

quiet_dep_cmd	:= '  DEP\\t$(in-local)'

dep_cmd		:= $(cc) $$(cflags-$$(<:.c=.o)) $$(cppflags-$$(<:.c=.o)) \

			-M -MT \

			"$$(subst $$(srctree),$$(objtree),$$(<:.c=.o))\

			$$@" $$< > $$@ 2>/dev/null

quiet_ld-r_cmd	:= '  LD\\t$(out-local) $(in-objs-local)'

ld-r_cmd	:= $(ld) $$(ldflags-$$(dir $$@)) -r $(in-objs) -o $$@

quiet_rm_cmd	:= '  RM\\t$$(subst clean-,,$$(subst distclean-,,$(out-local)))'

rm_cmd		:= -$(rm) $$(subst clean-,,$$(subst distclean-,,$$@))

quiet_install_cmd := '  INSTALL $(out-local)'

install_cmd	:= -$(install) $$(subst install-,,$$@) $$(installdir)

# Generate the requested rule for the requested directory.  First echo

# the command according to the requested verbosity (suppress all the

# output if $(QS)$(1)_cmd is not defined, i.e., in the silent make case,)

# and then emit the actual command.

define cmd

	$(if $($(QS)$(1)_cmd),@echo -e '$($(QS)$(1)_cmd)')

	@$($(1)_cmd)

endef

# Remove duplicate slashes, ../'s, trailing slashes and so on from paths.

define clean-path

$(dir $(abspath $(1)))$(notdir $(abspath $(1)))

endef

# Adjust the paths for all the prerequisites of a target.  Given a list

# of objects, with relative or absolute path, figure out the right paths

# in the build directory.  Leave the output in $(target-objs).

define all-prerequisites-templ

target-obj-list:=$(1)

# Filter absolute paths.

target-objs:=$$(filter $(srctree)/%,$$(target-obj-list))

target-obj-list:=$$(filter-out $$(target-objs),$$(target-obj-list))

# Add all the other objects, and convert the path to the $(objtree)

# root and with a reasonable path.

target-objs+=$$(addprefix $$(curdir)/,$$(target-obj-list))

target-objs:=$$(foreach dir,$$(subst $(srctree),$(objtree),$$(target-objs)),\

	$$(call clean-path,$$(dir)))

endef

# Produce targets for a given library.

define lib-templ

lib:=$(1)

lib-target:=$$(objdir)/$$(lib)

# Get a list of all the prerequisites needed to build the library.

$$(eval $$(call all-prerequisites-templ,\

	$$(patsubst %/,%/obj.o,$$($$(lib)-objs))))

$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),$$(lib))))

$$(foreach obj,$$(target-objs),\

	$$(eval $$(call flags-per-objects,$$(obj),$$(lib))))

# Produce the real target, in $(objtree), and the user-friendly target,

# with a relative path to $(srctree).  Note that even when the two trees

# are equal we define two targets; a possible optimization could be to

# use relative paths for the object tree in this case, but the code can

# become even less readable than it is now...

$$(lib-target): $$(target-objs)

	$(call cmd,ar)

short-lib-taget:=$$(subst $$(srctree)/,,$$(curdir)/$$(lib))

.PHONY: $$(short-lib-target)

$$(short-lib-target): $$(lib-target)

# Update the $(subdirs) for $(curdir) and its target list.

subdirs+=$$(filter %/,$$($$(lib)-objs))

curdir-targets+=$$(lib-target)

.PHONY: clean-$$(lib-target)

clean-$$(lib-target):

	$(call cmd,rm)

curdir-clean-targets+= clean-$$(lib-target)

.PHONY: install-$$(lib-target)

install-$$(lib-target): $$(lib-target)

	$(call cmd,install)

curdir-install-targets+= install-$$(lib-target)

endef

# Produce the needed code for a given object.

define obj-templ

obj:=$(1)

obj-target:=$$(objdir)/$$(obj)

obj-dep:=$$(objdir)/.$$(obj:.o=.c).deps

# Handle dependencies.

ifeq ($(goals-have-clean),)

$$(obj-dep): $$(objdir-prereq)

-include $$(obj-dep)

endif

# Produce the user shortcut for the real target (that does not need to

# be produced, as it is handled by implicit rules.)

short-obj-target:= $$(subst $$(srctree)/,,$$(curdir)/$$(obj))

.PHONY: $$(short-obj-target)

$$(short-obj-target): $$(obj-target)

curdir-targets+=$$(obj-target)

.PHONY: clean-$$(obj-target) distclean-$$(obj-dep)

clean-$$(obj-target):

	$(call cmd,rm)

distclean-$$(obj-dep):

	$(call cmd,rm)

curdir-clean-targets+= clean-$$(obj-target)

curdir-distclean-targets+= distclean-$$(obj-dep)

endef

# Handle the flags for the current directory.  for each *FLAGS variable

# used by the implicit rules there are two variants:

#    o the local one, e.g., cflags:=-I. or cflags+=-I. changing the

#      flags used only by the current directory.

#    o The global one, e.g., exported-cflags:=-I$(srctree) changing the

#      flags for the current directory and all its subdirs.

# The flag handling is split in three parts, one to be inserted before

# including the current directory makefile, one before recurring into

# subdirs, the other one after the recursion.

define flags-save-templ

flag:=$(1)

# Flags on input to this dir; they must be preserved for our sibling

# directories.

saved-$$(flag)-$$(curdir):= $$($$(flag))

endef

define flags-pre-templ

flag:=$(1)

# For the current directory, use the user-specified flags (that may

# come from our parent directory.)  Extra flags are used to specify

# library-specific flags.

$$(flag)-$$(curdir):=$$($$(flag)) $$(exported-$$(flag))

#to-print+= [ $$(flag)-$$(curdir) = $$($$(flag)-$$(curdir)) ] RET

# Export to our children also the user exported flags.

$$(flag):= $$(saved-$$(flag)-$$(curdir)) $$(exported-$$(flag))

exported-$$(flag):=

endef

define flags-post-templ

flag:=$(1)

# Restore the flags that our parent specified.

$$(flag):= $$(saved-$$(flag)-$$(curdir))

endef

# Allow redefinition of flags on the basis of a single target.  Each

# target gets its own version of the flags, based on the ones of the

# current directory and its own ones.

define flags-per-target

flag:=$(1)

target:=$(2)

$$(flag)-$$(curdir)/$$(target):=$$($$(flag)-$$(curdir)) \

	 $$($$(target)-$$(flag)) $$(extra-$$(flag)-$$(curdir)/$$(target))

# Those are the flags coming from the upper directories, they are set for

# obj.o targets, we must export them to our children, so we leave them here.

exported-$$(flag)-$$(curdir)/$$(target):= $$($$(target)-$$(flag)) \

	$$(extra-$$(flag)-$$(curdir)/$$(target))

$$(target)-$$(flag):=

endef

define flags-per-object

# Generate flags only for objects in the current directory, as prerequisites

# that come from ousdide are not compiled here.

flag:=$(1)

target:=$(3)

ifeq ($(dir $(subst $(objtree),$(srctree),$(2))),$$(curdir)/)

this-obj:=$(notdir $(2))

# The flags for a given object are the ones specified for its target

# plus any specific one.

$$(flag)-$$(curdir)/$$(this-obj):=$$($$(flag)-$$(curdir)/$$(target)) \

	$$($$(this-obj)-$$(flag))

$$(this-obj)-$$(flag):=

#to-print+= [ $$(flag)-$$(curdir)/$$(this-obj) = $$($$(flag)-$$(curdir)/$$(this-obj)) ] RET

endif

# Pass the right flags to the subdirs we use to build $(target).

ifeq ($$(notdir $(2)),obj.o)

extra-$$(flag)-$(2):= $$(exported-$$(flag)-$$(curdir)/$$(target))

endif

endef

# Allow the user to specify per-object flags

define flags-per-objects

$$(foreach flag,$$(flags),\

	$$(eval $$(call flags-per-object,$$(flags),$(1),$(2))))

endef

# Helper to define per-library flags.

define flags-per-libs

$$(foreach flag,$$(flags),\

	$$(eval $$(call flags-per-lib,$$(flags),$(1),$(2))))

endef

# Disable default implicit rules.

.SUFFIXES:

# The roots of our source and object trees.  If an O=dir option is

# passed to the toplevel makefile all the output of the building

# process is in dir.

srctree:=$(call clean-path,$(CURDIR))

objtree:=$(if $(O),$(call clean-path,$(O)),$(srctree))

ifeq ($(wildcard $(objtree)),)

$(error Output directory $(objtree) does not exist)

endif

clean-targets:=

distclean-targets:=

install-targets:=

goals-have-clean:=$(strip $(filter clean distclean,$(MAKECMDGOALS)))

aflags:= $(AFLAGS)

cflags:= $(CFLAGS)

cppflags:= $(CPPFLAGS)

ldflags:= $(LDFLAGS)

flags:= aflags cflags cppflags ldflags

# XXX debug only

to-print:=

# The following macro is used to do a standard set of operations

# for every subdirectory we have to work on.  It is instantiated

# every time we change subdirectory, and generates a set of targets

# specific to that directory.

define recurse-templ

# Remember where we are in the source and object tree.  The clean-path

# macro is used for user output and for generating targets independently

# from directories being specified as dir or dir/ or with multiple slashes

# and so on.

curdir:=$$(call clean-path,$(1))

objdir:=$(objtree)$$(subst $(srctree),,$$(curdir))

# Save the flags our parent passed us.

$$(foreach flag,$(flags),$$(eval $$(call flags-save-templ,$$(flag))))

# A list of all the targets defined for the current directory.  It is

# used to produce an user-reachable target for submakes into source tree

# subdirectories, e.g., if src/utils is a source directory, make src/utils

# will build all the targets defined inside it.  Start with the short path

# to all subdirs.

curdir-targets:=

curdir-clean-targets:=

curdir-distclean-targets:=

curdir-install-targets:=

# If the output directory does not exist every target that actually

# needs it will have to create it.

ifneq ($(objtree),$(srctree))

ifeq ($$(wildcard $$(objdir)),)

objdir-prereq:=$$(objdir)/.build

$$(objdir)/.build:

	$(Q)if [ ! -d $$(dir $$@) ] ; then \

		mkdir -p $$(dir $$@) ; touch $$@ ; fi

endif

endif

# Include the next subdirectory.  Don't include the root makefile,

# if we are at the first step of the recursion.

include $$(subst $(srctree)/Makefile,,$$(curdir)/Makefile)

# Figure out all the targets.  We support three kind of targets:

#   - subdirectories

#   - libraries

#   - objects

#

# Subdirectories are recursively processed, libraries are built using

# the objects specified in their *.a-objs target (if it contains a

# subdirectory the latter is processed and the resulting obj.o object

# is included,) and objects are compiled and incrementally linked

# together in a obj.o file.

subdirs:=$$(filter %/, $$(targets))

objs:=$$(filter %.o, $$(targets))

libs:=$$(filter %.a, $$(targets))

$$(eval $$(call all-prerequisites-templ, $$(subdirs)))

subdir-targets:= $$(target-objs)

# Recurse into all the subdirectories.

curdir-targets+=$$(subst $(objtree)/,,$$(subdir-targets))

# Look for prerequisites to build obj.o for the current directory.

$$(eval $$(call all-prerequisites-templ,\

	$$(filter-out $$(exclude),$$(objs))))

target-objs+=$$(addsuffix /obj.o,$$(subdir-targets))

$$(foreach flag,$(flags),$$(eval $$(call flags-pre-templ,$$(flag))))

# Produce a target for obj.o, even if not needed (it will be empty in

# this case.)

ifneq ($$(strip $$(target-objs)),)

$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),obj.o)))

$$(foreach obj,$$(target-objs),\

	$$(eval $$(call flags-per-objects,$$(obj),obj.o)))

$$(objdir)/obj.o: $$(target-objs)

	$(call cmd,ld-r)

else

$$(objdir)/obj.o:

	$(Q)touch $$@

endif

curdir-targets+= $$(objdir)/obj.o

# to-print+= [ [ $$(objdir)/obj.o ] $$(target-objs) ]

# Produce the needed targets for each library.

ifneq ($$(strip $$(libs)),)

$$(foreach lib,$$(libs),$$(eval $$(call lib-templ,$$(lib))))

endif

# Produce a target for each local object.  Build the list of all the

# targets specified by the current subdir.  It is given by all the local

# objects in $(targets) or in a library contained in it.  Non-local

# objects can be specified as dependencies but must be built from the

# directory containing them (if needed their directory can specify that

# they are not to be included in the local obj.o putting them into

# $(exclude); this may not seem straightforward but is to support a

# few corner cases.)

#

# First build a relative path for all the .o files in the targets (the

# default one and the library ones,) taking care of not being confused

# by relative directory specifications.

all-local-objs-paths:=$$(subst $$(curdir)/,,\

	$$(abspath $$(addprefix $$(curdir)/,\

	$$(objs) $$(foreach lib,$$(libs),$$(filter %.o,$$($$(lib)-objs))))))

# Then keep only those with a dir equal to ./  A local object is not

# allowed to be specified with a path specifying a directory different

# from the current one.

all-local-objs:=$$(foreach obj, $$(all-local-objs-paths), \

	$$(if $$(subst ./,,$$(dir $$(obj))),,$$(obj)))

# Produce one target per object, and the rules to build them along with

# their dependencies.

ifneq ($$(strip $$(all-local-objs)),)

$$(foreach obj,$$(all-local-objs),$$(eval $$(call obj-templ,$$(obj))))

$$(objdir)/%.o: $$(curdir)/%.c

	$(call cmd,cc)

$$(objdir)/%.o: $$(curdir)/%.s

	$(call cmd,as)

$$(objdir)/.%.c.deps: $$(curdir)/%.c

	$(call cmd,dep)

endif

# Produce the user-friendly target for the source dir, depending

# on its obj.o, libs and local objects (only if they can be built.)

curdir-target:= $$(subst $$(srctree)/,,$$(curdir))

.PHONY: $$(curdir-target)

$$(curdir-target): $$(curdir-targets)

# Produce the clean and distclean targets for the current directory.

.PHONY: clean-$$(curdir-target) distclean-$$(curdir-target)

clean-$$(curdir-target): $$(curdir-clean-targets)

distclean-$$(curdir-target): clean-$$(curdir-target) \

	$$(curdir-distclean-targets)

# to-print+=[ distclean-$$(curdir-target) ]

clean-targets+= clean-$$(curdir-target)

distclean-targets+= distclean-$$(curdir-target)

# Produce the install target.  This is very Shark specific...

.PHONY: install-$$(curdir-target)

$$(curdir-install-targets): $(installdir)/.build

install-$$(curdir-target): $$(curdir-install-targets)

install-targets+= install-$$(curdir-target)

#to-print+=[ install-$$(curdir-target) = $$(curdir-install-targets) ]

# Actually do the recursion, generating the code specified by

# recurse-tmpl for every subdirectory needed from the one we are

# leaving.

ifneq ($$(strip $$(subdirs)),)

$$(foreach dir,$$(subdirs),$$(eval $$(call recurse-templ,$(1)/$$(dir))))

curdir:=$$(call clean-path,$(1))

endif

$$(foreach flag,$(flags),$$(eval $$(call flags-post-templ,$$(flag))))

endef

.DEFAULT_GOAL:= all

include shark.cfg

installdir:=$(objtree)/.lib

# Handle Shark configuration.  Really insane, indeed.

options:=TSC APIC BIOS TRACER FG FB COMPILER

define strip-in-place

$(1):=$(strip $($(1)))

endef

$(foreach cfgopt,$(options),$(eval $(call strip-in-place,$(cfgopt))))

cpp-tsc-TRUE:= -D__TSC__

cpp-apic-TRUE:= -D__APIC__

cpp-bios-VM86:= -DVM86

cpp-tracer-NEW:= -D__NEW_TRACER__

cpp-tracer-OLD:= -D__OLD_TRACER__

cpp-fg-FORCE_PXC:= -D__FORCE_PXC__

cpp-fb-VESA:= -DCONFIG_FB_VESA -DCONFIG_LOGO

cpp-fb-FINDPCI:= -DCONFIG_FB_RIVA -DCONFIG_FB_RADEON -DCONFIG_FB_MATROX	\

	-DCONFIG_LOGO -DCONFIG_FB_MATROX_G100				\

	-DCONFIG_FB_MATROX_MILLENIUM -DCONFIG_FB_MATROX_MYSTIQUE

cpp-fb-VGA16:= -DCONFIG_FB_VGA16

include-dirs:=								\

	-I$(srctree)/include -I$(srctree)/modules			\

	-I$(srctree)/libc/arch/$(ARCH)/include				\

	-I$(srctree)/tracer/include					\

	-I$(srctree)/oslib

config:= -D__LINUX__							\

	$(cpp-tsc-$(TSC)) $(cpp-apic-$(APIC)) $(cpp-bios-$(BIOS))	\

	$(cpp-tracer-$(TRACER)) $(cpp-fg-$(FG)) $(cpp-fb-$(FB))

exported-cppflags:= $(include-dirs) $(config)

exported-aflags:= -x assembler-with-cpp $(include-dirs) $(config)

cc-compiler-GCC4:= -Wimplicit-function-declaration -Wno-attributes	\

	-Wno-pointer-sign -Wall -O -fno-builtin -nostdinc		\

	-minline-all-stringops -fno-stack-protector

cc-compiler-GCC3:= -Wimplicit-function-declaration -Wall -O		\

	-fno-builtin -nostdinc -minline-all-stringops

cc-compiler-DJGPP:= -Wimplicit-function-declaration -Wall -O		\

	-fno-builtin -nostdinc -minline-all-stringops

exported-cflags:= $(cc-compiler-$(COMPILER))

fs-YES:= fs/

targets:= libgkern.a drivers/ libc/ ports/ tracer/ $(fs-$(SHARK_FS))

libgkern.a-objs:= oslib/ kernel/ modules/

# Let the good times roll...

$(eval $(call recurse-templ,$(srctree)))

all: $(srctree)

.PHONY: clean distclean

clean: $(clean-targets)

distclean: $(distclean-targets)

debug:

	@echo $(to-print)

.PHONY: install $(install-targets)

$(installdir)/.build:

	$(Q)if [ ! -d $(dir $@) ] ; then \

		mkdir -p $(dir $@) ; touch $@ ; fi

install: $(install-targets)