Subversion Repositories shark

#ifndef _LINUX_FD_H

#define _LINUX_FD_H

#include <linux/ioctl.h>

/* New file layout: Now the ioctl definitions immediately follow the

 * definitions of the structures that they use */

/*

 * Geometry

 */

struct floppy_struct {

        unsigned int    size,           /* nr of sectors total */

                        sect,           /* sectors per track */

                        head,           /* nr of heads */

                        track,          /* nr of tracks */

                        stretch;        /* !=0 means double track steps */

#define FD_STRETCH 1

#define FD_SWAPSIDES 2

        unsigned char   gap,            /* gap1 size */

                        rate,           /* data rate. |= 0x40 for perpendicular */

#define FD_2M 0x4

#define FD_SIZECODEMASK 0x38

#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)

#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \

                             512 : 128 << FD_SIZECODE(floppy) )

#define FD_PERP 0x40

                        spec1,          /* stepping rate, head unload time */

                        fmt_gap;        /* gap2 size */

        const char      * name; /* used only for predefined formats */

};

/* commands needing write access have 0x40 set */

/* commands needing super user access have 0x80 set */

#define FDCLRPRM _IO(2, 0x41)

/* clear user-defined parameters */

#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 

#define FDSETMEDIAPRM FDSETPRM

/* set user-defined parameters for current media */

#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 

#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)

#define FDDEFMEDIAPRM FDDEFPRM

#define FDGETMEDIAPRM FDGETPRM

/* set/get disk parameters */

#define FDMSGON  _IO(2,0x45)

#define FDMSGOFF _IO(2,0x46)

/* issue/don't issue kernel messages on media type change */

/*

 * Formatting (obsolete)

 */

#define FD_FILL_BYTE 0xF6 /* format fill byte. */

struct format_descr {

        unsigned int device,head,track;

};

#define FDFMTBEG _IO(2,0x47)

/* begin formatting a disk */

#define FDFMTTRK _IOW(2,0x48, struct format_descr)

/* format the specified track */

#define FDFMTEND _IO(2,0x49)

/* end formatting a disk */

/*

 * Error thresholds

 */

struct floppy_max_errors {

        unsigned int

          abort,      /* number of errors to be reached before aborting */

          read_track, /* maximal number of errors permitted to read an

                       * entire track at once */

          reset,      /* maximal number of errors before a reset is tried */

          recal,      /* maximal number of errors before a recalibrate is

                       * tried */

          /*

           * Threshold for reporting FDC errors to the console.

           * Setting this to zero may flood your screen when using

           * ultra cheap floppies ;-)

           */

          reporting;

};

#define FDSETEMSGTRESH  _IO(2,0x4a)

/* set fdc error reporting threshold */

#define FDFLUSH  _IO(2,0x4b)

/* flush buffers for media; either for verifying media, or for

 * handling a media change without closing the file descriptor */

#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)

#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)

/* set/get abortion and read_track threshold. See also floppy_drive_params

 * structure */

typedef char floppy_drive_name[16];

#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)

/* get drive type: 5 1/4 or 3 1/2 */

/*

 * Drive parameters (user modifiable)

 */

struct floppy_drive_params {

        signed char cmos;               /* CMOS type */

        /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms

         * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).

         */

        unsigned long max_dtr;          /* Step rate, usec */

        unsigned long hlt;              /* Head load/settle time, msec */

        unsigned long hut;              /* Head unload time (remnant of

                                         * 8" drives) */

        unsigned long srt;              /* Step rate, usec */

        unsigned long spinup;           /* time needed for spinup (expressed

                                         * in jiffies) */

        unsigned long spindown;         /* timeout needed for spindown */

        unsigned char spindown_offset;  /* decides in which position the disk

                                         * will stop */

        unsigned char select_delay;     /* delay to wait after select */

        unsigned char rps;              /* rotations per second */

        unsigned char tracks;           /* maximum number of tracks */

        unsigned long timeout;          /* timeout for interrupt requests */

        unsigned char interleave_sect;  /* if there are more sectors, use

                                         * interleave */

        struct floppy_max_errors max_errors;

        char flags;                     /* various flags, including ftd_msg */

/*

 * Announce successful media type detection and media information loss after

 * disk changes.

 * Also used to enable/disable printing of overrun warnings.

 */

#define FTD_MSG 0x10

#define FD_BROKEN_DCL 0x20

#define FD_DEBUG 0x02

#define FD_SILENT_DCL_CLEAR 0x4

#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 

                                considerations */

        char read_track;                /* use readtrack during probing? */

/*

 * Auto-detection. Each drive type has eight formats which are

 * used in succession to try to read the disk. If the FDC cannot lock onto

 * the disk, the next format is tried. This uses the variable 'probing'.

 */

        short autodetect[8];            /* autodetected formats */

        int checkfreq; /* how often should the drive be checked for disk

                        * changes */

        int native_format; /* native format of this drive */

};

enum {

        FD_NEED_TWADDLE_BIT,    /* more magic */

        FD_VERIFY_BIT,          /* inquire for write protection */

        FD_DISK_NEWCHANGE_BIT,  /* change detected, and no action undertaken yet

                                 * to clear media change status */

        FD_UNUSED_BIT,

        FD_DISK_CHANGED_BIT,    /* disk has been changed since last i/o */

        FD_DISK_WRITABLE_BIT    /* disk is writable */

};

#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)

#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)

/* set/get drive parameters */

/*

 * Current drive state (not directly modifiable by user, readonly)

 */

struct floppy_drive_struct {

        unsigned long flags;

/* values for these flags */

#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)

#define FD_VERIFY (1 << FD_VERIFY_BIT)

#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)

#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)

#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)

        unsigned long spinup_date;

        unsigned long select_date;

        unsigned long first_read_date;

        short probed_format;

        short track; /* current track */

        short maxblock; /* id of highest block read */

        short maxtrack; /* id of highest half track read */

        int generation; /* how many diskchanges? */

/*

 * (User-provided) media information is _not_ discarded after a media change

 * if the corresponding keep_data flag is non-zero. Positive values are

 * decremented after each probe.

 */

        int keep_data;

        /* Prevent "aliased" accesses. */

        int fd_ref;

        int fd_device;

        unsigned long last_checked; /* when was the drive last checked for a disk

                           * change? */

        char *dmabuf;

        int bufblocks;

};

#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)

#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)

/* get drive state: GET returns the cached state, POLL polls for new state */

/*

 * reset FDC

 */

enum reset_mode {

        FD_RESET_IF_NEEDED,     /* reset only if the reset flags is set */

        FD_RESET_IF_RAWCMD,     /* obsolete */

        FD_RESET_ALWAYS         /* reset always */

};

#define FDRESET _IO(2, 0x54)

/*

 * FDC state

 */

struct floppy_fdc_state {      

        int spec1;              /* spec1 value last used */

        int spec2;              /* spec2 value last used */

        int dtr;

        unsigned char version;  /* FDC version code */

        unsigned char dor;

        unsigned long address;  /* io address */

        unsigned int rawcmd:2;

        unsigned int reset:1;

        unsigned int need_configure:1;

        unsigned int perp_mode:2;

        unsigned int has_fifo:1;

        unsigned int driver_version;    /* version code for floppy driver */

#define FD_DRIVER_VERSION 0x100

/* user programs using the floppy API should use floppy_fdc_state to

 * get the version number of the floppy driver that they are running

 * on. If this version number is bigger than the one compiled into the

 * user program (the FD_DRIVER_VERSION define), it should be prepared

 * to bigger structures

 */

        unsigned char track[4];

        /* Position of the heads of the 4 units attached to this FDC,

         * as stored on the FDC. In the future, the position as stored

         * on the FDC might not agree with the actual physical

         * position of these drive heads. By allowing such

         * disagreement, it will be possible to reset the FDC without

         * incurring the expensive cost of repositioning all heads.

         * Right now, these positions are hard wired to 0. */

};

#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)

/*

 * Asynchronous Write error tracking

 */

struct floppy_write_errors {

        /* Write error logging.

         *

         * These fields can be cleared with the FDWERRORCLR ioctl.

         * Only writes that were attempted but failed due to a physical media

         * error are logged.  write(2) calls that fail and return an error code

         * to the user process are not counted.

         */

        unsigned int write_errors;  /* number of physical write errors

                                     * encountered */

        /* position of first and last write errors */

        unsigned long first_error_sector;

        int           first_error_generation;

        unsigned long last_error_sector;

        int           last_error_generation;

        unsigned int badness; /* highest retry count for a read or write

                               * operation */

};

#define FDWERRORCLR  _IO(2, 0x56)

/* clear write error and badness information */

#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)

/* get write error and badness information */

/*

 * Raw commands

 */

/* new interface flag: now we can do them in batches */

#define FDHAVEBATCHEDRAWCMD

struct floppy_raw_cmd {

        unsigned int flags;

#define FD_RAW_READ 1

#define FD_RAW_WRITE 2

#define FD_RAW_NO_MOTOR 4

#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */

#define FD_RAW_INTR 8    /* wait for an interrupt */

#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */

#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 

                                    * completion */

#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */

#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */

/* more "in" flags */

#define FD_RAW_MORE 0x100  /* more records follow */

#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */

#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */

#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure

                                  * detection too */

/* more "out" flags */

#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */

#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */

        void *data;

        char *kernel_data; /* location of data buffer in the kernel */

        struct floppy_raw_cmd *next; /* used for chaining of raw cmd's

                                      * within the kernel */

        long length; /* in: length of dma transfer. out: remaining bytes */

        long phys_length; /* physical length, if different from dma length */

        int buffer_length; /* length of allocated buffer */

        unsigned char rate;

        unsigned char cmd_count;

        unsigned char cmd[16];

        unsigned char reply_count;

        unsigned char reply[16];

        int track;

        int resultcode;

        int reserved1;

        int reserved2;

};

#define FDRAWCMD _IO(2, 0x58)

/* send a raw command to the fdc. Structure size not included, because of

 * batches */

#define FDTWADDLE _IO(2, 0x59)

/* flicker motor-on bit before reading a sector. Experimental */

#define FDEJECT _IO(2, 0x5a)

/* eject the disk */

#endif