Subversion Repositories shark

/*

 * ipmi.h

 *

 * MontaVista IPMI interface

 *

 * Author: MontaVista Software, Inc.

 *         Corey Minyard <minyard@mvista.com>

 *         source@mvista.com

 *

 * Copyright 2002 MontaVista Software Inc.

 *

 *  This program is free software; you can redistribute it and/or modify it

 *  under the terms of the GNU General Public License as published by the

 *  Free Software Foundation; either version 2 of the License, or (at your

 *  option) any later version.

 *

 *

 *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED

 *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

 *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

 *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

 *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

 *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

 *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

 *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 *  You should have received a copy of the GNU General Public License along

 *  with this program; if not, write to the Free Software Foundation, Inc.,

 *  675 Mass Ave, Cambridge, MA 02139, USA.

 */

#ifndef __LINUX_IPMI_H

#define __LINUX_IPMI_H

#include <linux/ipmi_msgdefs.h>

/*

 * This file describes an interface to an IPMI driver.  You have to

 * have a fairly good understanding of IPMI to use this, so go read

 * the specs first before actually trying to do anything.

 *

 * With that said, this driver provides a multi-user interface to the

 * IPMI driver, and it allows multiple IPMI physical interfaces below

 * the driver.  The physical interfaces bind as a lower layer on the

 * driver.  They appear as interfaces to the application using this

 * interface.

 *

 * Multi-user means that multiple applications may use the driver,

 * send commands, receive responses, etc.  The driver keeps track of

 * commands the user sends and tracks the responses.  The responses

 * will go back to the application that send the command.  If the

 * response doesn't come back in time, the driver will return a

 * timeout error response to the application.  Asynchronous events

 * from the BMC event queue will go to all users bound to the driver.

 * The incoming event queue in the BMC will automatically be flushed

 * if it becomes full and it is queried once a second to see if

 * anything is in it.  Incoming commands to the driver will get

 * delivered as commands.

 *

 * This driver provides two main interfaces: one for in-kernel

 * applications and another for userland applications.  The

 * capabilities are basically the same for both interface, although

 * the interfaces are somewhat different.  The stuff in the

 * #ifdef KERNEL below is the in-kernel interface.  The userland

 * interface is defined later in the file.  */

/*

 * This is an overlay for all the address types, so it's easy to

 * determine the actual address type.  This is kind of like addresses

 * work for sockets.

 */

#define IPMI_MAX_ADDR_SIZE 32

struct ipmi_addr

{

         /* Try to take these from the "Channel Medium Type" table

            in section 6.5 of the IPMI 1.5 manual. */

        int   addr_type;

        short channel;

        char  data[IPMI_MAX_ADDR_SIZE];

};

/*

 * When the address is not used, the type will be set to this value.

 * The channel is the BMC's channel number for the channel (usually

 * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.

 */

#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c

struct ipmi_system_interface_addr

{

        int           addr_type;

        short         channel;

        unsigned char lun;

};

/* An IPMB Address. */

#define IPMI_IPMB_ADDR_TYPE             0x01

/* Used for broadcast get device id as described in section 17.9 of the

   IPMI 1.5 manual. */

#define IPMI_IPMB_BROADCAST_ADDR_TYPE   0x41

struct ipmi_ipmb_addr

{

        int           addr_type;

        short         channel;

        unsigned char slave_addr;

        unsigned char lun;

};

/*

 * Channel for talking directly with the BMC.  When using this

 * channel, This is for the system interface address type only.  FIXME

 * - is this right, or should we use -1?

 */

#define IPMI_BMC_CHANNEL  0xf

#define IPMI_NUM_CHANNELS 0x10

/*

 * A raw IPMI message without any addressing.  This covers both

 * commands and responses.  The completion code is always the first

 * byte of data in the response (as the spec shows the messages laid

 * out).

 */

struct ipmi_msg

{

        unsigned char  netfn;

        unsigned char  cmd;

        unsigned short data_len;

        unsigned char  *data;

};

/*

 * Various defines that are useful for IPMI applications.

 */

#define IPMI_INVALID_CMD_COMPLETION_CODE        0xC1

#define IPMI_TIMEOUT_COMPLETION_CODE            0xC3

#define IPMI_UNKNOWN_ERR_COMPLETION_CODE        0xff

/*

 * Receive types for messages coming from the receive interface.  This

 * is used for the receive in-kernel interface and in the receive

 * IOCTL.

 */

#define IPMI_RESPONSE_RECV_TYPE         1 /* A response to a command */

#define IPMI_ASYNC_EVENT_RECV_TYPE      2 /* Something from the event queue */

#define IPMI_CMD_RECV_TYPE              3 /* A command from somewhere else */

/* Note that async events and received commands do not have a completion

   code as the first byte of the incoming data, unlike a response. */

#ifdef __KERNEL__

/*

 * The in-kernel interface.

 */

#include <linux/list.h>

/* Opaque type for a IPMI message user.  One of these is needed to

   send and receive messages. */

typedef struct ipmi_user *ipmi_user_t;

/*

 * Stuff coming from the receive interface comes as one of these.

 * They are allocated, the receiver must free them with

 * ipmi_free_recv_msg() when done with the message.  The link is not

 * used after the message is delivered, so the upper layer may use the

 * link to build a linked list, if it likes.

 */

struct ipmi_recv_msg

{

        struct list_head link;

        /* The type of message as defined in the "Receive Types"

           defines above. */

        int              recv_type;

        ipmi_user_t      user;

        struct ipmi_addr addr;

        long             msgid;

        struct ipmi_msg  msg;

        /* Call this when done with the message.  It will presumably free

           the message and do any other necessary cleanup. */

        void (*done)(struct ipmi_recv_msg *msg);

        /* Place-holder for the data, don't make any assumptions about

           the size or existance of this, since it may change. */

        unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];

};

/* Allocate and free the receive message. */

static inline void ipmi_free_recv_msg(struct ipmi_recv_msg *msg)

{

        msg->done(msg);

}

struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);

struct ipmi_user_hndl

{

        /* Routine type to call when a message needs to be routed to

           the upper layer.  This will be called with some locks held,

           the only IPMI routines that can be called are ipmi_request

           and the alloc/free operations. */

        void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,

                               void                 *handler_data);

        /* Called when the interface detects a watchdog pre-timeout.  If

           this is NULL, it will be ignored for the user. */

        void (*ipmi_watchdog_pretimeout)(void *handler_data);

};

/* Create a new user of the IPMI layer on the given interface number. */

int ipmi_create_user(unsigned int          if_num,

                     struct ipmi_user_hndl *handler,

                     void                  *handler_data,

                     ipmi_user_t           *user);

/* Destroy the given user of the IPMI layer. */

int ipmi_destroy_user(ipmi_user_t user);

/* Get the IPMI version of the BMC we are talking to. */

void ipmi_get_version(ipmi_user_t   user,

                      unsigned char *major,

                      unsigned char *minor);

/* Set and get the slave address and LUN that we will use for our

   source messages.  Note that this affects the interface, not just

   this user, so it will affect all users of this interface.  This is

   so some initialization code can come in and do the OEM-specific

   things it takes to determine your address (if not the BMC) and set

   it for everyone else. */

void ipmi_set_my_address(ipmi_user_t   user,

                         unsigned char address);

unsigned char ipmi_get_my_address(ipmi_user_t user);

void ipmi_set_my_LUN(ipmi_user_t   user,

                     unsigned char LUN);

unsigned char ipmi_get_my_LUN(ipmi_user_t user);

/*

 * Send a command request from the given user.  The address is the

 * proper address for the channel type.  If this is a command, then

 * the message response comes back, the receive handler for this user

 * will be called with the given msgid value in the recv msg.  If this

 * is a response to a command, then the msgid will be used as the

 * sequence number for the response (truncated if necessary), so when

 * sending a response you should use the sequence number you received

 * in the msgid field of the received command.  If the priority is >

 * 0, the message will go into a high-priority queue and be sent

 * first.  Otherwise, it goes into a normal-priority queue.

 */

int ipmi_request(ipmi_user_t      user,

                 struct ipmi_addr *addr,

                 long             msgid,

                 struct ipmi_msg  *msg,

                 int              priority);

/*

 * Like ipmi_request, but lets you specify the slave return address.

 */

int ipmi_request_with_source(ipmi_user_t      user,

                             struct ipmi_addr *addr,

                             long             msgid,

                             struct ipmi_msg  *msg,

                             int              priority,

                             unsigned char    source_address,

                             unsigned char    source_lun);

/*

 * Like ipmi_request, but with messages supplied.  This will not

 * allocate any memory, and the messages may be statically allocated

 * (just make sure to do the "done" handling on them).  Note that this

 * is primarily for the watchdog timer, since it should be able to

 * send messages even if no memory is available.  This is subject to

 * change as the system changes, so don't use it unless you REALLY

 * have to.

 */

int ipmi_request_supply_msgs(ipmi_user_t          user,

                             struct ipmi_addr     *addr,

                             long                 msgid,

                             struct ipmi_msg      *msg,

                             void                 *supplied_smi,

                             struct ipmi_recv_msg *supplied_recv,

                             int                  priority);

/*

 * When commands come in to the SMS, the user can register to receive

 * them.  Only one user can be listening on a specific netfn/cmd pair

 * at a time, you will get an EBUSY error if the command is already

 * registered.  If a command is received that does not have a user

 * registered, the driver will automatically return the proper

 * error.

 */

int ipmi_register_for_cmd(ipmi_user_t   user,

                          unsigned char netfn,

                          unsigned char cmd);

int ipmi_unregister_for_cmd(ipmi_user_t   user,

                            unsigned char netfn,

                            unsigned char cmd);

/*

 * When the user is created, it will not receive IPMI events by

 * default.  The user must set this to TRUE to get incoming events.

 * The first user that sets this to TRUE will receive all events that

 * have been queued while no one was waiting for events.

 */

int ipmi_set_gets_events(ipmi_user_t user, int val);

/*

 * Register the given user to handle all received IPMI commands.  This

 * will fail if anyone is registered as a command receiver or if

 * another is already registered to receive all commands.  NOTE THAT

 * THIS IS FOR EMULATION USERS ONLY, DO NOT USER THIS FOR NORMAL

 * STUFF.

 */

int ipmi_register_all_cmd_rcvr(ipmi_user_t user);

int ipmi_unregister_all_cmd_rcvr(ipmi_user_t user);

/*

 * Called when a new SMI is registered.  This will also be called on

 * every existing interface when a new watcher is registered with

 * ipmi_smi_watcher_register().

 */

struct ipmi_smi_watcher

{

        struct list_head link;

        /* These two are called with read locks held for the interface

           the watcher list.  So you can add and remove users from the

           IPMI interface, send messages, etc., but you cannot add

           or remove SMI watchers or SMI interfaces. */

        void (*new_smi)(int if_num);

        void (*smi_gone)(int if_num);

};

int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);

int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);

/* The following are various helper functions for dealing with IPMI

   addresses. */

/* Return the maximum length of an IPMI address given it's type. */

unsigned int ipmi_addr_length(int addr_type);

/* Validate that the given IPMI address is valid. */

int ipmi_validate_addr(struct ipmi_addr *addr, int len);

/* Return 1 if the given addresses are equal, 0 if not. */

int ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2);

#endif /* __KERNEL__ */

/*

 * The userland interface

 */

/*

 * The userland interface for the IPMI driver is a standard character

 * device, with each instance of an interface registered as a minor

 * number under the major character device.

 *

 * The read and write calls do not work, to get messages in and out

 * requires ioctl calls because of the complexity of the data.  select

 * and poll do work, so you can wait for input using the file

 * descriptor, you just can use read to get it.

 *

 * In general, you send a command down to the interface and receive

 * responses back.  You can use the msgid value to correlate commands

 * and responses, the driver will take care of figuring out which

 * incoming messages are for which command and find the proper msgid

 * value to report.  You will only receive reponses for commands you

 * send.  Asynchronous events, however, go to all open users, so you

 * must be ready to handle these (or ignore them if you don't care).

 *

 * The address type depends upon the channel type.  When talking

 * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored

 * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must

 * supply a valid IPMB address with the addr_type set properly.

 *

 * When talking to normal channels, the driver takes care of the

 * details of formatting and sending messages on that channel.  You do

 * not, for instance, have to format a send command, you just send

 * whatever command you want to the channel, the driver will create

 * the send command, automatically issue receive command and get even

 * commands, and pass those up to the proper user.

 */

/* The magic IOCTL value for this interface. */

#define IPMI_IOC_MAGIC 'i'

/* Messages sent to the interface are this format. */

struct ipmi_req

{

        unsigned char *addr; /* Address to send the message to. */

        unsigned int  addr_len;

        long    msgid; /* The sequence number for the message.  This

                          exact value will be reported back in the

                          response to this request if it is a command.

                          If it is a response, this will be used as

                          the sequence value for the response.  */

        struct ipmi_msg msg;

};

/*

 * Send a message to the interfaces.  error values are:

 *   - EFAULT - an address supplied was invalid.

 *   - EINVAL - The address supplied was not valid, or the command

 *              was not allowed.

 *   - EMSGSIZE - The message to was too large.

 *   - ENOMEM - Buffers could not be allocated for the command.

 */

#define IPMICTL_SEND_COMMAND            _IOR(IPMI_IOC_MAGIC, 13,        \

                                             struct ipmi_req)

/* Messages received from the interface are this format. */

struct ipmi_recv

{

        int     recv_type; /* Is this a command, response or an

                              asyncronous event. */

        unsigned char *addr;    /* Address the message was from is put

                                   here.  The caller must supply the

                                   memory. */

        unsigned int  addr_len; /* The size of the address buffer.

                                   The caller supplies the full buffer

                                   length, this value is updated to

                                   the actual message length when the

                                   message is received. */

        long    msgid; /* The sequence number specified in the request

                          if this is a response.  If this is a command,

                          this will be the sequence number from the

                          command. */

        struct ipmi_msg msg; /* The data field must point to a buffer.

                                The data_size field must be set to the

                                size of the message buffer.  The

                                caller supplies the full buffer

                                length, this value is updated to the

                                actual message length when the message

                                is received. */

};

/*

 * Receive a message.  error values:

 *  - EAGAIN - no messages in the queue.

 *  - EFAULT - an address supplied was invalid.

 *  - EINVAL - The address supplied was not valid.

 *  - EMSGSIZE - The message to was too large to fit into the message buffer,

 *               the message will be left in the buffer. */

#define IPMICTL_RECEIVE_MSG             _IOWR(IPMI_IOC_MAGIC, 12,       \

                                              struct ipmi_recv)

/*

 * Like RECEIVE_MSG, but if the message won't fit in the buffer, it

 * will truncate the contents instead of leaving the data in the

 * buffer.

 */

#define IPMICTL_RECEIVE_MSG_TRUNC       _IOWR(IPMI_IOC_MAGIC, 11,       \

                                              struct ipmi_recv)

/* Register to get commands from other entities on this interface. */

struct ipmi_cmdspec

{

        unsigned char netfn;

        unsigned char cmd;

};

/*

 * Register to receive a specific command.  error values:

 *   - EFAULT - an address supplied was invalid.

 *   - EBUSY - The netfn/cmd supplied was already in use.

 *   - ENOMEM - could not allocate memory for the entry.

 */

#define IPMICTL_REGISTER_FOR_CMD        _IOR(IPMI_IOC_MAGIC, 14,        \

                                             struct ipmi_cmdspec)

/*

 * Unregister a regsitered command.  error values:

 *  - EFAULT - an address supplied was invalid.

 *  - ENOENT - The netfn/cmd was not found registered for this user.

 */

#define IPMICTL_UNREGISTER_FOR_CMD      _IOR(IPMI_IOC_MAGIC, 15,        \

                                             struct ipmi_cmdspec)

/*

 * Set whether this interface receives events.  Note that the first

 * user registered for events will get all pending events for the

 * interface.  error values:

 *  - EFAULT - an address supplied was invalid.

 */

#define IPMICTL_SET_GETS_EVENTS_CMD     _IOR(IPMI_IOC_MAGIC, 16, int)

/*

 * Set and get the slave address and LUN that we will use for our

 * source messages.  Note that this affects the interface, not just

 * this user, so it will affect all users of this interface.  This is

 * so some initialization code can come in and do the OEM-specific

 * things it takes to determine your address (if not the BMC) and set

 * it for everyone else.  You should probably leave the LUN alone.

 */

#define IPMICTL_SET_MY_ADDRESS_CMD      _IOR(IPMI_IOC_MAGIC, 17, unsigned int)

#define IPMICTL_GET_MY_ADDRESS_CMD      _IOR(IPMI_IOC_MAGIC, 18, unsigned int)

#define IPMICTL_SET_MY_LUN_CMD          _IOR(IPMI_IOC_MAGIC, 19, unsigned int)

#define IPMICTL_GET_MY_LUN_CMD          _IOR(IPMI_IOC_MAGIC, 20, unsigned int)

#endif /* __LINUX_IPMI_H */