WebSVN - shark - Blame - Rev 180 - /shark/trunk/drivers/bttv/bttv-cards.c

Rev	Author	Line No.	Line
170	giacomo	1	/*
		2	bttv-cards.c
		3
		4	this file has configuration informations - card-specific stuff
		5	like the big tvcards array for the most part
		6
		7	Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
		8	& Marcus Metzler (mocm@thp.uni-koeln.de)
		9	(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
		10
		11	This program is free software; you can redistribute it and/or modify
		12	it under the terms of the GNU General Public License as published by
		13	the Free Software Foundation; either version 2 of the License, or
		14	(at your option) any later version.
		15
		16	This program is distributed in the hope that it will be useful,
		17	but WITHOUT ANY WARRANTY; without even the implied warranty of
		18	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		19	GNU General Public License for more details.
		20
		21	You should have received a copy of the GNU General Public License
		22	along with this program; if not, write to the Free Software
		23	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
		24
		25	*/
		26
		27	/* SHARK version by Giacomo Guidi <giacomo@gandalf.sssup.it> */
		28
		29	#define __NO_VERSION__ 1
		30
		31	#include <unistd.h>
		32	#include <linux/pci.h>
		33
		34	#include "drivers/bttv.h"
		35	#include "drivers/tuner.h"
		36
		37	/* fwd decl */
		38	static void boot_msp34xx(struct bttv *btv, int pin);
		39	static void hauppauge_eeprom(struct bttv *btv);
		40	static void osprey_eeprom(struct bttv *btv);
		41	static void avermedia_eeprom(struct bttv *btv);
		42	static void init_PXC200(struct bttv *btv);
		43	#if 0
		44	static void init_tea5757(struct bttv *btv);
		45	#endif
		46
		47	static void winview_audio(struct bttv btv, struct video_audio v, int set);
		48	static void lt9415_audio(struct bttv btv, struct video_audio v, int set);
		49	static void avermedia_tvphone_audio(struct bttv btv, struct video_audio v,
		50	int set);
		51	static void terratv_audio(struct bttv btv, struct video_audio v, int set);
		52	static void gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set);
		53	static void winfast2000_audio(struct bttv btv, struct video_audio v, int set);
		54	static void pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set);
		55	static void fv2000s_audio(struct bttv btv, struct video_audio v, int set);
		56	static void windvr_audio(struct bttv btv, struct video_audio v, int set);
		57	static void rv605_muxsel(struct bttv *btv, unsigned int input);
		58
		59	/* config variables */
		60	static int triton1=0;
		61	static int vsfx=0;
		62	int no_overlay=-1;
		63	static unsigned int card[4] = { -1, -1, -1, -1 };
		64	static unsigned int pll[4] = { -1, -1, -1, -1 };
		65	static unsigned int tuner[4] = { -1, -1, -1, -1 };
		66	static unsigned int gpiomask = -1;
		67	static unsigned int audioall = -1;
		68	static unsigned int audiomux[5] = { -1, -1, -1, -1, -1 };
		69
		70	/* ----------------------------------------------------------------------- */
		71	/* list of card IDs for bt878+ cards */
		72
		73	static struct CARD {
		74	unsigned id;
		75	int cardnr;
		76	char *name;
		77	} cards[] = {
		78	{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
		79	{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
		80	{ 0x45000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV/PVR" },
		81	{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
		82	{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
		83	{ 0xff020070, BTTV_OSPREY5x0, "Osprey-500" },
		84	{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
		85
		86	{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
		87	{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
		88
		89	{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		90	{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, P/N 6000704" },
		91	{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
		92	{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
		93
		94	{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV" },
		95	{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
		96	{ 0x001c11bd, BTTV_PINNACLE, "Pinnacle PCTV Sat" },
		97
		98	{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
		99
		100	{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
		101	{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
		102	{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
		103
		104	{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		105	{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
		106	{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		107	{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
		108
		109	{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
		110	{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
		111
		112	{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue" },
		113	{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue" },
		114	{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue" },
		115	{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue" },
		116	{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
		117	{ 0x1127153b, BTTV_TERRATV, "Terratec TV+" },
		118	// clashes with flyvideo
		119	//{ 0x18521852, BTTV_TERRATV, "Terratec TV+" },
		120	{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue" },
		121	{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" },
		122	{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" },
		123
		124	{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
		125	{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		126	{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		127	{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		128
		129	{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
		130	{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM205 PCTV" },
		131	{ 0x18501851, BTTV_CHRONOS_VS2, "Flyvideo 98 (LR50)/ Chronos Video Shuttle II" },
		132	{ 0x18511851, BTTV_FLYVIDEO98EZ, "Flyvideo 98EZ (LR51)/ CyberMail AV" },
		133	{ 0x18521852, BTTV_TYPHOON_TVIEW, "Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
		134	{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
		135	{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		136	{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
		137	{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
		138	{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
		139
		140	{ 0, -1, NULL }
		141	};
		142
		143	/* ----------------------------------------------------------------------- */
		144	/* array with description for bt848 / bt878 tv/grabber cards */
		145
		146	struct tvcard bttv_tvcards[] = {
		147	{
		148	/* ---- card 0x00 ---------------------------------- */
		149	name: " * UNKNOWN/GENERIC * ",
		150	video_inputs: 4,
		151	audio_inputs: 1,
		152	tuner: 0,
		153	svhs: 2,
		154	muxsel: { 2, 3, 1, 0},
		155	tuner_type: -1,
		156	},{
		157	name: "MIRO PCTV",
		158	video_inputs: 4,
		159	audio_inputs: 1,
		160	tuner: 0,
		161	svhs: 2,
		162	gpiomask: 15,
		163	muxsel: { 2, 3, 1, 1},
		164	audiomux: { 2, 0, 0, 0, 10},
		165	needs_tvaudio: 1,
		166	tuner_type: -1,
		167	},{
		168	name: "Hauppauge (bt848)",
		169	video_inputs: 4,
		170	audio_inputs: 1,
		171	tuner: 0,
		172	svhs: 2,
		173	gpiomask: 7,
		174	muxsel: { 2, 3, 1, 1},
		175	audiomux: { 0, 1, 2, 3, 4},
		176	needs_tvaudio: 1,
		177	tuner_type: -1,
		178	},{
		179	name: "STB",
		180	video_inputs: 3,
		181	audio_inputs: 1,
		182	tuner: 0,
		183	svhs: 2,
		184	gpiomask: 7,
		185	muxsel: { 2, 3, 1, 1},
		186	audiomux: { 4, 0, 2, 3, 1},
		187	no_msp34xx: 1,
		188	needs_tvaudio: 1,
		189	tuner_type: -1,
		190	},{
		191
		192	/* ---- card 0x04 ---------------------------------- */
		193	name: "Intel",
		194	video_inputs: 3,
		195	audio_inputs: 1,
		196	tuner: 0,
		197	svhs: -1,
		198	gpiomask: 7,
		199	muxsel: { 2, 3, 1, 1},
		200	audiomux: { 0, 1, 2, 3, 4},
		201	needs_tvaudio: 1,
		202	tuner_type: -1,
		203	},{
		204	name: "Diamond DTV2000",
		205	video_inputs: 4,
		206	audio_inputs: 1,
		207	tuner: 0,
		208	svhs: 2,
		209	gpiomask: 3,
		210	muxsel: { 2, 3, 1, 0},
		211	audiomux: { 0, 1, 0, 1, 3},
		212	needs_tvaudio: 1,
		213	tuner_type: -1,
		214	},{
		215	name: "AVerMedia TVPhone",
		216	video_inputs: 3,
		217	audio_inputs: 1,
		218	tuner: 0,
		219	svhs: 3,
		220	muxsel: { 2, 3, 1, 1},
		221	gpiomask: 0x0f,
		222	audiomux: { 0x0c, 0x04, 0x08, 0x04, 0},
		223	/* 0x04 for some cards ?? */
		224	needs_tvaudio: 1,
		225	tuner_type: -1,
		226	audio_hook: avermedia_tvphone_audio,
		227	},{
		228	name: "MATRIX-Vision MV-Delta",
		229	video_inputs: 5,
		230	audio_inputs: 1,
		231	tuner: -1,
		232	svhs: 3,
		233	gpiomask: 0,
		234	muxsel: { 2, 3, 1, 0, 0},
		235	audiomux: {0 },
		236	needs_tvaudio: 1,
		237	tuner_type: -1,
		238	},{
		239
		240	/* ---- card 0x08 ---------------------------------- */
		241	name: "FlyVideo II (Bt848) LR26",
		242	video_inputs: 4,
		243	audio_inputs: 1,
		244	tuner: 0,
		245	svhs: 2,
		246	gpiomask: 0xc00,
		247	muxsel: { 2, 3, 1, 1},
		248	audiomux: { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
		249	needs_tvaudio: 1,
		250	pll: PLL_28,
		251	tuner_type: -1,
		252	},{
		253	name: "IXMicro TurboTV",
		254	video_inputs: 3,
		255	audio_inputs: 1,
		256	tuner: 0,
		257	svhs: 2,
		258	gpiomask: 3,
		259	muxsel: { 2, 3, 1, 1},
		260	audiomux: { 1, 1, 2, 3, 0},
		261	needs_tvaudio: 1,
		262	tuner_type: -1,
		263	},{
		264	name: "Hauppauge (bt878)",
		265	video_inputs: 4,
		266	audio_inputs: 1,
		267	tuner: 0,
		268	svhs: 2,
		269	gpiomask: 0x0f, /* old: 7 */
		270	muxsel: { 2, 0, 1, 1},
		271	audiomux: { 0, 1, 2, 3, 4},
		272	needs_tvaudio: 1,
		273	pll: PLL_28,
		274	tuner_type: -1,
		275	},{
		276	name: "MIRO PCTV pro",
		277	video_inputs: 3,
		278	audio_inputs: 1,
		279	tuner: 0,
		280	svhs: 2,
		281	gpiomask: 0x3014f,
		282	muxsel: { 2, 3, 1, 1},
		283	audiomux: { 0x20001,0x10001, 0, 0,10},
		284	needs_tvaudio: 1,
		285	tuner_type: -1,
		286	},{
		287
		288	/* ---- card 0x0c ---------------------------------- */
		289	name: "ADS Technologies Channel Surfer TV",
		290	video_inputs: 3,
		291	audio_inputs: 1,
		292	tuner: 0,
		293	svhs: 2,
		294	gpiomask: 15,
		295	muxsel: { 2, 3, 1, 1},
		296	audiomux: { 13, 14, 11, 7, 0, 0},
		297	needs_tvaudio: 1,
		298	tuner_type: -1,
		299	},{
		300	name: "AVerMedia TVCapture 98",
		301	video_inputs: 3,
		302	audio_inputs: 4,
		303	tuner: 0,
		304	svhs: 2,
		305	gpiomask: 15,
		306	muxsel: { 2, 3, 1, 1},
		307	audiomux: { 13, 14, 11, 7, 0, 0},
		308	needs_tvaudio: 1,
		309	pll: PLL_28,
		310	tuner_type: -1,
		311	},{
		312	name: "Aimslab Video Highway Xtreme (VHX)",
		313	video_inputs: 3,
		314	audio_inputs: 1,
		315	tuner: 0,
		316	svhs: 2,
		317	gpiomask: 7,
		318	muxsel: { 2, 3, 1, 1},
		319	audiomux: { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
		320	needs_tvaudio: 1,
		321	tuner_type: -1,
		322	},{
		323	name: "Zoltrix TV-Max",
		324	video_inputs: 3,
		325	audio_inputs: 1,
		326	tuner: 0,
		327	svhs: 2,
		328	gpiomask: 15,
		329	muxsel: { 2, 3, 1, 1},
		330	audiomux: {0 , 0, 1 , 0, 10},
		331	needs_tvaudio: 1,
		332	tuner_type: -1,
		333	},{
		334
		335	/* ---- card 0x10 ---------------------------------- */
		336	name: "Pixelview PlayTV (bt878)",
		337	video_inputs: 3,
		338	audio_inputs: 1,
		339	tuner: 0,
		340	svhs: 2,
		341	gpiomask: 0x01fe00,
		342	muxsel: { 2, 3, 1, 1},
		343	audiomux: { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
		344	needs_tvaudio: 1,
		345	pll: PLL_28,
		346	tuner_type: -1,
		347	},{
		348	name: "Leadtek WinView 601",
		349	video_inputs: 3,
		350	audio_inputs: 1,
		351	tuner: 0,
		352	svhs: 2,
		353	gpiomask: 0x8300f8,
		354	muxsel: { 2, 3, 1, 1,0},
		355	audiomux: { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
		356	needs_tvaudio: 1,
		357	tuner_type: -1,
		358	audio_hook: winview_audio,
		359	has_radio: 1,
		360	},{
		361	name: "AVEC Intercapture",
		362	video_inputs: 3,
		363	audio_inputs: 2,
		364	tuner: 0,
		365	svhs: 2,
		366	gpiomask: 0,
		367	muxsel: {2, 3, 1, 1},
		368	audiomux: {1, 0, 0, 0, 0},
		369	needs_tvaudio: 1,
		370	tuner_type: -1,
		371	},{
		372	name: "LifeView FlyKit w/o Tuner",
		373	video_inputs: 3,
		374	audio_inputs: 1,
		375	tuner: -1,
		376	svhs: -1,
		377	gpiomask: 0x8dff00,
		378	muxsel: { 2, 3, 1, 1},
		379	audiomux: { 0 },
		380	no_msp34xx: 1,
		381	tuner_type: -1,
		382	},{
		383
		384	/* ---- card 0x14 ---------------------------------- */
		385	name: "CEI Raffles Card",
		386	video_inputs: 3,
		387	audio_inputs: 3,
		388	tuner: 0,
		389	svhs: 2,
		390	muxsel: {2, 3, 1, 1},
		391	tuner_type: -1,
		392	},{
		393	name: "Lucky Star Image World ConferenceTV",
		394	video_inputs: 3,
		395	audio_inputs: 1,
		396	tuner: 0,
		397	svhs: 2,
		398	gpiomask: 0x00fffe07,
		399	muxsel: { 2, 3, 1, 1},
		400	audiomux: { 131072, 1, 1638400, 3, 4},
		401	needs_tvaudio: 1,
		402	pll: PLL_28,
		403	tuner_type: TUNER_PHILIPS_PAL_I,
		404	},{
		405	name: "Phoebe Tv Master + FM (CPH050)",
		406	video_inputs: 3,
		407	audio_inputs: 1,
		408	tuner: 0,
		409	svhs: 2,
		410	gpiomask: 0xc00,
		411	muxsel: { 2, 3, 1, 1},
		412	audiomux: {0, 1, 0x800, 0x400, 0xc00, 0},
		413	needs_tvaudio: 1,
		414	tuner_type: -1,
		415	},{
		416	name: "Modular Technology MM205 PCTV, bt878",
		417	video_inputs: 2,
		418	audio_inputs: 1,
		419	tuner: 0,
		420	svhs: -1,
		421	gpiomask: 7,
		422	muxsel: { 2, 3 },
		423	audiomux: { 0, 0, 0, 0, 0 },
		424	no_msp34xx: 1,
		425	pll: PLL_28,
		426	tuner_type: TUNER_ALPS_TSBB5_PAL_I,
		427	},{
		428
		429	/* ---- card 0x18 ---------------------------------- */
		430	name: "[many vendors] CPH05X/06X (bt878)",
		431	video_inputs: 3,
		432	audio_inputs: 1,
		433	tuner: 0,
		434	svhs: 2,
		435	gpiomask: 0xe00,
		436	muxsel: { 2, 3, 1, 1},
		437	audiomux: {0x400, 0x400, 0x400, 0x400, 0xc00},
		438	needs_tvaudio: 1,
		439	pll: PLL_28,
		440	tuner_type: -1,
		441	},{
		442	name: "Terratec/Vobis TV-Boostar",
		443	video_inputs: 3,
		444	audio_inputs: 1,
		445	tuner: 0,
		446	svhs: 2,
		447	gpiomask: 16777215,
		448	muxsel: { 2, 3, 1, 1},
		449	audiomux: { 131072, 1, 1638400, 3,4},
		450	needs_tvaudio: 1,
		451	tuner_type: -1,
		452	},{
		453	name: "Newer Hauppauge WinCam (bt878)",
		454	video_inputs: 4,
		455	audio_inputs: 1,
		456	tuner: 0,
		457	svhs: 3,
		458	gpiomask: 7,
		459	muxsel: { 2, 0, 1, 1},
		460	audiomux: { 0, 1, 2, 3, 4},
		461	needs_tvaudio: 1,
		462	tuner_type: -1,
		463	},{
		464	name: "MAXI TV Video PCI2",
		465	video_inputs: 3,
		466	audio_inputs: 1,
		467	tuner: 0,
		468	svhs: 2,
		469	gpiomask: 0xffff,
		470	muxsel: { 2, 3, 1, 1},
		471	audiomux: { 0, 1, 2, 3, 0xc00},
		472	needs_tvaudio: 1,
		473	tuner_type: TUNER_PHILIPS_SECAM,
		474	},{
		475
		476	/* ---- card 0x1c ---------------------------------- */
		477	name: "Terratec TerraTV+",
		478	video_inputs: 3,
		479	audio_inputs: 1,
		480	tuner: 0,
		481	svhs: 2,
		482	gpiomask: 0x70000,
		483	muxsel: { 2, 3, 1, 1},
		484	audiomux: { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
		485	needs_tvaudio: 1,
		486	tuner_type: TUNER_PHILIPS_PAL,
		487	audio_hook: terratv_audio,
		488	},{
		489	/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
		490	name: "Imagenation PXC200",
		491	video_inputs: 5,
		492	audio_inputs: 1,
		493	tuner: -1,
		494	svhs: 1, /* was: 4 */
		495	gpiomask: 0,
		496	muxsel: { 2, 3, 1, 0, 0},
		497	audiomux: { 0 },
		498	needs_tvaudio: 1,
		499	tuner_type: -1,
		500	},{
		501	name: "FlyVideo 98",
		502	video_inputs: 3,
		503	audio_inputs: 1,
		504	tuner: 0,
		505	svhs: 2,
		506	gpiomask: 0x1800, //0x8dfe00
		507	muxsel: {2, 3, 1, 1},
		508	audiomux: { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
		509	needs_tvaudio: 1,
		510	tuner_type: -1,
		511	},{
		512	name: "iProTV",
		513	video_inputs: 3,
		514	audio_inputs: 1,
		515	tuner: 0,
		516	svhs: 2,
		517	gpiomask: 1,
		518	muxsel: { 2, 3, 1, 1},
		519	audiomux: { 1, 0, 0, 0, 0 },
		520	tuner_type: -1,
		521	},{
		522
		523	/* ---- card 0x20 ---------------------------------- */
		524	name: "Intel Create and Share PCI",
		525	video_inputs: 4,
		526	audio_inputs: 1,
		527	tuner: -1,
		528	svhs: 2,
		529	gpiomask: 7,
		530	muxsel: { 2, 3, 1, 1},
		531	audiomux: { 4, 4, 4, 4, 4},
		532	needs_tvaudio: 1,
		533	tuner_type: -1,
		534	},{
		535	name: "Terratec TerraTValue",
		536	video_inputs: 3,
		537	audio_inputs: 1,
		538	tuner: 0,
		539	svhs: 2,
		540	gpiomask: 0xffff00,
		541	muxsel: { 2, 3, 1, 1},
		542	audiomux: { 0x500, 0, 0x300, 0x900, 0x900},
		543	needs_tvaudio: 1,
		544	pll: PLL_28,
		545	tuner_type: TUNER_PHILIPS_PAL,
		546	},{
		547	name: "Leadtek WinFast 2000",
		548	video_inputs: 3,
		549	audio_inputs: 1,
		550	tuner: 0,
		551	svhs: 2,
		552	gpiomask: 0xc33000,
		553	muxsel: { 2, 3, 1, 1,0},
		554	audiomux: { 0x422000,0x001000,0x621100,0x620000,0x800000,0x620000},
		555	needs_tvaudio: 0,
		556	pll: PLL_28,
		557	tuner_type: -1,
		558	audio_hook: winfast2000_audio,
		559	},{
		560	name: "Flyvideo 98 (LR50Q) / Chronos Video Shuttle II",
		561	video_inputs: 3,
		562	audio_inputs: 3,
		563	tuner: 0,
		564	svhs: 2,
		565	gpiomask: 0x1800,
		566	muxsel: { 2, 3, 1, 1},
		567	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800},
		568	needs_tvaudio: 1,
		569	pll: PLL_28,
		570	tuner_type: -1,
		571	},{
		572
		573	/* ---- card 0x24 ---------------------------------- */
		574	name: "Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner",
		575	video_inputs: 3,
		576	audio_inputs: 3,
		577	tuner: 0,
		578	svhs: 2,
		579	gpiomask: 0x1800,
		580	muxsel: { 2, 3, 1, 1},
		581	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		582	needs_tvaudio: 1,
		583	pll: PLL_28,
		584	tuner_type: -1,
		585	has_radio: 1,
		586	},{
		587	name: "PixelView PlayTV pro",
		588	video_inputs: 3,
		589	audio_inputs: 1,
		590	tuner: 0,
		591	svhs: 2,
		592	gpiomask: 0xff,
		593	muxsel: { 2, 3, 1, 1 },
		594	audiomux: { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
		595	no_msp34xx: 1,
		596	pll: PLL_28,
		597	tuner_type: -1,
		598	},{
		599	name: "TView99 CPH06X",
		600	video_inputs: 4,
		601	audio_inputs: 1,
		602	tuner: 0,
		603	svhs: 2,
		604	gpiomask: 0x551e00,
		605	muxsel: { 2, 3, 1, 0},
		606	audiomux: { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
		607	needs_tvaudio: 1,
		608	pll: PLL_28,
		609	tuner_type: -1,
		610	},{
		611	name: "Pinnacle PCTV Studio/Rave",
		612	video_inputs: 3,
		613	audio_inputs: 1,
		614	tuner: 0,
		615	svhs: 2,
		616	gpiomask: 0x03000F,
		617	muxsel: { 2, 3, 1, 1},
		618	audiomux: { 2, 0, 0, 0, 1},
		619	needs_tvaudio: 1,
		620	pll: PLL_28,
		621	tuner_type: -1,
		622	},{
		623
		624	/* ---- card 0x28 ---------------------------------- */
		625	name: "STB2",
		626	video_inputs: 3,
		627	audio_inputs: 1,
		628	tuner: 0,
		629	svhs: 2,
		630	gpiomask: 7,
		631	muxsel: { 2, 3, 1, 1},
		632	audiomux: { 4, 0, 2, 3, 1},
		633	no_msp34xx: 1,
		634	needs_tvaudio: 1,
		635	tuner_type: -1,
		636	},{
		637	name: "AVerMedia TVPhone 98",
		638	video_inputs: 3,
		639	audio_inputs: 4,
		640	tuner: 0,
		641	svhs: 2,
		642	gpiomask: 12,
		643	muxsel: { 2, 3, 1, 1},
		644	audiomux: { 13, 4, 11, 7, 0, 0},
		645	needs_tvaudio: 1,
		646	pll: PLL_28,
		647	tuner_type: -1,
		648	has_radio: 1,
		649	},{
		650	name: "ProVideo PV951", /* pic16c54 */
		651	video_inputs: 3,
		652	audio_inputs: 1,
		653	tuner: 0,
		654	svhs: 2,
		655	gpiomask: 0,
		656	muxsel: { 2, 3, 1, 1},
		657	audiomux: { 0, 0, 0, 0, 0},
		658	no_msp34xx: 1,
		659	pll: PLL_28,
		660	tuner_type: 1,
		661	},{
		662	name: "Little OnAir TV",
		663	video_inputs: 3,
		664	audio_inputs: 1,
		665	tuner: 0,
		666	svhs: 2,
		667	gpiomask: 0xe00b,
		668	muxsel: {2, 3, 1, 1},
		669	audiomux: {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
		670	no_msp34xx: 1,
		671	tuner_type: -1,
		672	},{
		673
		674	/* ---- card 0x2c ---------------------------------- */
		675	name: "Sigma TVII-FM",
		676	video_inputs: 2,
		677	audio_inputs: 1,
		678	tuner: 0,
		679	svhs: -1,
		680	gpiomask: 3,
		681	muxsel: {2, 3, 1, 1},
		682	audiomux: {1, 1, 0, 2, 3},
		683	no_msp34xx: 1,
		684	pll: PLL_NONE,
		685	tuner_type: -1,
		686	},{
		687	name: "MATRIX-Vision MV-Delta 2",
		688	video_inputs: 5,
		689	audio_inputs: 1,
		690	tuner: -1,
		691	svhs: 3,
		692	gpiomask: 0,
		693	muxsel: { 2, 3, 1, 0, 0},
		694	audiomux: {0 },
		695	no_msp34xx: 1,
		696	pll: PLL_28,
		697	tuner_type: -1,
		698	},{
		699	name: "Zoltrix Genie TV/FM",
		700	video_inputs: 3,
		701	audio_inputs: 1,
		702	tuner: 0,
		703	svhs: 2,
		704	gpiomask: 0xbcf03f,
		705	muxsel: { 2, 3, 1, 1},
		706	audiomux: { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
		707	no_msp34xx: 1,
		708	pll: PLL_28,
		709	tuner_type: 21,
		710	},{
		711	name: "Terratec TV/Radio+",
		712	video_inputs: 3,
		713	audio_inputs: 1,
		714	tuner: 0,
		715	svhs: 2,
		716	gpiomask: 0x1f0000,
		717	muxsel: { 2, 3, 1, 1},
		718	audiomux: { 0xe2ffff, 0xebffff, 0, 0, 0xe0ffff, 0xe2ffff },
		719	needs_tvaudio: 1,
		720	no_msp34xx: 1,
		721	pll: PLL_35,
		722	tuner_type: 1,
		723	has_radio: 1,
		724	},{
		725
		726	/* ---- card 0x30 ---------------------------------- */
		727	name: "Dynalink Magic TView ",
		728	video_inputs: 3,
		729	audio_inputs: 1,
		730	tuner: 0,
		731	svhs: 2,
		732	gpiomask: 15,
		733	muxsel: { 2, 3, 1, 1},
		734	audiomux: {2,0,0,0,1},
		735	needs_tvaudio: 1,
		736	pll: PLL_28,
		737	tuner_type: -1,
		738	},{
		739	name: "IODATA GV-BCTV3/PCI",
		740	video_inputs: 3,
		741	audio_inputs: 1,
		742	tuner: 0,
		743	svhs: 2,
		744	gpiomask: 0x010f00,
		745	muxsel: {2, 3, 0, 0},
		746	audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
		747	no_msp34xx: 1,
		748	pll: PLL_28,
		749	tuner_type: TUNER_ALPS_TSHC6_NTSC,
		750	audio_hook: gvbctv3pci_audio,
		751	},{
		752	name: "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
		753	video_inputs: 4,
		754	audio_inputs: 1,
		755	tuner: 0,
		756	svhs: 3,
		757	gpiomask: 0xAA0000,
		758	muxsel: { 2,3,1,1 },
		759	audiomux: { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
		760	no_msp34xx: 1,
		761	pll: PLL_28,
		762	tuner_type: TUNER_PHILIPS_PAL_I,
		763	},{
		764	name: "Eagle Wireless Capricorn2 (bt878A)",
		765	video_inputs: 4,
		766	audio_inputs: 1,
		767	tuner: 0,
		768	svhs: 2,
		769	gpiomask: 7,
		770	muxsel: { 2, 0, 1, 1},
		771	audiomux: { 0, 1, 2, 3, 4},
		772	pll: PLL_28,
		773	tuner_type: -1 /* TUNER_ALPS_TMDH2_NTSC */,
		774	},{
		775
		776	/* ---- card 0x34 ---------------------------------- */
		777	/* David H�rdeman <david@2gen.com> */
		778	name: "Pinnacle PCTV Studio Pro",
		779	video_inputs: 3,
		780	audio_inputs: 1,
		781	tuner: 0,
		782	svhs: 2,
		783	gpiomask: 0x03000F,
		784	muxsel: { 2, 3, 1, 1},
		785	audiomux: { 1, 0x10001, 0, 0, 10},
		786	needs_tvaudio: 1,
		787	pll: PLL_28,
		788	tuner_type: -1,
		789	},{
		790	/* Claas Langbehn <claas@bigfoot.com>,
		791	Sven Grothklags <sven@upb.de> */
		792	name: "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
		793	video_inputs: 3,
		794	audio_inputs: 3,
		795	tuner: 0,
		796	svhs: 2,
		797	gpiomask: 0x1c,
		798	muxsel: { 2, 3, 1, 1},
		799	audiomux: { 0, 0, 0x10, 8, 4 },
		800	needs_tvaudio: 1,
		801	pll: PLL_28,
		802	tuner_type: TUNER_PHILIPS_PAL_I,
		803	has_radio: 1,
		804	},{
		805	/* Tim R�stermundt <rosterm@uni-muenster.de>
		806	in de.comp.os.unix.linux.hardware:
		807	options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
		808	audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
		809	options tuner type=5 */
		810	name: "Lifetec LT 9415 TV (LR90 Rev.F)",
		811	video_inputs: 4,
		812	audio_inputs: 1,
		813	tuner: 0,
		814	svhs: 2,
		815	gpiomask: 0x18e0,
		816	muxsel: { 2, 3, 1, 1},
		817	audiomux: { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
		818	/* 0x0000: Tuner normal stereo
		819	0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
		820	0x0880: Tuner A2 stereo */
		821	pll: PLL_28,
		822	tuner_type: TUNER_PHILIPS_PAL,
		823	audio_hook: lt9415_audio,
		824	has_radio: 1,
		825	},{
		826	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		827	old Easy TV BT848 version (model CPH031) */
		828	name: "BESTBUY Easy TV (CPH031)",
		829	video_inputs: 4,
		830	audio_inputs: 1,
		831	tuner: 0,
		832	svhs: 2,
		833	gpiomask: 0xF,
		834	muxsel: { 2, 3, 1, 0},
		835	audiomux: { 2, 0, 0, 0, 10},
		836	needs_tvaudio: 0,
		837	pll: PLL_28,
		838	tuner_type: TUNER_TEMIC_PAL,
		839	},{
		840
		841	/* ---- card 0x38 ---------------------------------- */
		842	/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
		843	name: "FlyVideo '98/FM",
		844	video_inputs: 3,
		845	audio_inputs: 3,
		846	tuner: 0,
		847	svhs: 2,
		848	gpiomask: 0x1800,
		849	muxsel: { 2, 3, 0, 1},
		850	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		851	needs_tvaudio: 1,
		852	pll: PLL_28,
		853	tuner_type: 5,
		854	},{
		855	/* This is the ultimate cheapo capture card
		856	* just a BT848A on a small PCB!
		857	* Steve Hosgood <steve@equiinet.com> */
		858	name: "GrandTec 'Grand Video Capture' (Bt848)",
		859	video_inputs: 2,
		860	audio_inputs: 0,
		861	tuner: -1,
		862	svhs: 1,
		863	gpiomask: 0,
		864	muxsel: { 3, 1 },
		865	audiomux: { 0 },
		866	needs_tvaudio: 0,
		867	no_msp34xx: 1,
		868	pll: PLL_35,
		869	tuner_type: -1,
		870	},{
		871	/* Daniel Herrington <daniel.herrington@home.com> */
		872	name: "Phoebe TV Master Only (No FM) CPH060",
		873	video_inputs: 3,
		874	audio_inputs: 1,
		875	tuner: 0,
		876	svhs: 2,
		877	gpiomask: 0xe00,
		878	muxsel: { 2, 3, 1, 1},
		879	audiomux: { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
		880	needs_tvaudio: 1,
		881	pll: PLL_NONE,
		882	tuner_type: TUNER_TEMIC_4036FY5_NTSC,
		883	},{
		884	/* Matti Mottus <mottus@physic.ut.ee> */
		885	name: "TV Capturer (CPH03X)",
		886	video_inputs: 4,
		887	audio_inputs: 1,
		888	tuner: 0,
		889	svhs: 2,
		890	gpiomask: 0x03000F,
		891	muxsel: { 2, 3, 1, 0},
		892	audiomux: { 2,0,0,0,1 },
		893	pll: PLL_28,
		894	tuner_type: 0,
		895	},{
		896
		897	/* ---- card 0x3c ---------------------------------- */
		898	/* Philip Blundell <philb@gnu.org> */
		899	name: "Modular Technology MM100PCTV",
		900	video_inputs: 2,
		901	audio_inputs: 2,
		902	tuner: 0,
		903	svhs: -1,
		904	gpiomask: 11,
		905	muxsel: { 2, 3, 1, 1},
		906	audiomux: { 2, 0, 0, 1, 8},
		907	pll: PLL_35,
		908	tuner_type: TUNER_TEMIC_PAL,
		909
		910	},{
		911	/* Adrian Cox <adrian@humboldt.co.uk */
		912	name: "AG Electronics GMV1",
		913	video_inputs: 2,
		914	audio_inputs: 0,
		915	tuner: -1,
		916	svhs: 1,
		917	gpiomask: 0xF,
		918	muxsel: { 2, 2},
		919	audiomux: { },
		920	no_msp34xx: 1,
		921	needs_tvaudio: 0,
		922	pll: PLL_28,
		923	tuner_type: -1,
		924	},{
		925	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		926	new Easy TV BT878 version (model CPH061)
		927	special thanks to Informatica Mieres for providing the card */
		928	name: "BESTBUY Easy TV (bt878)",
		929	video_inputs: 3,
		930	audio_inputs: 2,
		931	tuner: 0,
		932	svhs: 2,
		933	gpiomask: 0xFF,
		934	muxsel: { 2, 3, 1, 0},
		935	audiomux: { 1, 0, 4, 4, 9},
		936	needs_tvaudio: 0,
		937	pll: PLL_28,
		938	tuner_type: TUNER_PHILIPS_PAL,
		939	},{
		940	/* Lukas Gebauer <geby@volny.cz> */
		941	name: "ATI TV-Wonder",
		942	video_inputs: 3,
		943	audio_inputs: 1,
		944	tuner: 0,
		945	svhs: 2,
		946	gpiomask: 0xf03f,
		947	muxsel: { 2, 3, 1, 0 },
		948	audiomux: { 0xbffe, 0, 0xbfff, 0, 0xbffe},
		949	pll: PLL_28,
		950	tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
		951	},{
		952
		953	/* ---- card 0x40 ---------------------------------- */
		954	/* Lukas Gebauer <geby@volny.cz> */
		955	name: "ATI TV-Wonder VE",
		956	video_inputs: 2,
		957	audio_inputs: 1,
		958	tuner: 0,
		959	svhs: -1,
		960	gpiomask: 1,
		961	muxsel: { 2, 3, 0, 1},
		962	audiomux: { 0, 0, 1, 0, 0},
		963	no_msp34xx: 1,
		964	pll: PLL_28,
		965	tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
		966	},{
		967	/* DeeJay <deejay@westel900.net (2000S) */
		968	name: "FlyVideo 2000S",
		969	video_inputs: 3,
		970	audio_inputs: 3,
		971	tuner: 0,
		972	svhs: 2,
		973	gpiomask: 0x18e0,
		974	muxsel: { 2, 3, 0, 1},
		975	/* Radio changed from 1e80 to 0x800 to make
		976	Flyvideo2000S in .hu happy (gm)*/
		977	/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
		978	audiomux: { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
		979	audio_hook: fv2000s_audio,
		980	no_msp34xx: 1,
		981	no_tda9875: 1,
		982	needs_tvaudio: 1,
		983	pll: PLL_28,
		984	tuner_type: 5,
		985	},{
		986	name: "Terratec TValueRadio",
		987	video_inputs: 3,
		988	audio_inputs: 1,
		989	tuner: 0,
		990	svhs: 2,
		991	gpiomask: 0xffff00,
		992	muxsel: { 2, 3, 1, 1},
		993	audiomux: { 0x500, 0x500, 0x300, 0x900, 0x900},
		994	needs_tvaudio: 1,
		995	pll: PLL_28,
		996	tuner_type: TUNER_PHILIPS_PAL,
		997	has_radio: 1,
		998	},{
		999	/* TANAKA Kei <peg00625@nifty.com> */
		1000	name: "IODATA GV-BCTV4/PCI",
		1001	video_inputs: 3,
		1002	audio_inputs: 1,
		1003	tuner: 0,
		1004	svhs: 2,
		1005	gpiomask: 0x010f00,
		1006	muxsel: {2, 3, 0, 0},
		1007	audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
		1008	no_msp34xx: 1,
		1009	pll: PLL_28,
		1010	tuner_type: TUNER_SHARP_2U5JF5540_NTSC,
		1011	audio_hook: gvbctv3pci_audio,
		1012	},{
		1013
		1014	/* ---- card 0x44 ---------------------------------- */
		1015	name: "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
		1016	// try "insmod msp3400 simple=0" if you have
		1017	// sound problems with this card.
		1018	video_inputs: 4,
		1019	audio_inputs: 1,
		1020	tuner: 0,
		1021	svhs: -1,
		1022	gpiomask: 0x4f8a00,
		1023	// 0x100000: 1=MSP enabled (0=disable again)
		1024	// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
		1025	audiomux: {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
		1026	// tvtuner, radio, external,internal, mute, stereo
		1027	/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
		1028	muxsel: { 2, 3 ,0 ,1},
		1029	tuner_type: TUNER_MT2032,
		1030	pll: PLL_28,
		1031	has_radio: 1,
		1032	},{
		1033	/* Philip Blundell <pb@nexus.co.uk> */
		1034	name: "Active Imaging AIMMS",
		1035	video_inputs: 1,
		1036	audio_inputs: 0,
		1037	tuner: -1,
		1038	tuner_type: -1,
		1039	pll: PLL_28,
		1040	muxsel: { 2 },
		1041	gpiomask: 0
		1042	},{
		1043	/* Tomasz Pyra <hellfire@sedez.iq.pl> */
		1044	name: "Pixelview PV-BT878P+ (Rev.4C)",
		1045	video_inputs: 3,
		1046	audio_inputs: 4,
		1047	tuner: 0,
		1048	svhs: 2,
		1049	gpiomask: 15,
		1050	muxsel: { 2, 3, 1, 1},
		1051	audiomux: { 0, 0, 11, 7, 13, 0},
		1052	needs_tvaudio: 1,
		1053	pll: PLL_28,
		1054	tuner_type: 25,
		1055	},{
		1056	name: "Flyvideo 98EZ (capture only)",
		1057	video_inputs: 4,
		1058	audio_inputs: 0,
		1059	tuner: -1,
		1060	svhs: 2,
		1061	muxsel: { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
		1062	pll: PLL_28,
		1063	no_msp34xx: 1,
		1064	},{
		1065
		1066	/* ---- card 0x48 ---------------------------------- */
		1067	/* Dariusz Kowalewski <darekk@automex.pl> */
		1068	name: "Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
		1069	video_inputs: 3,
		1070	audio_inputs: 1,
		1071	tuner: 0,
		1072	svhs: 2,
		1073	gpiomask: 0x3f,
		1074	muxsel: { 2, 3, 0, 1 },
		1075	audiomux: { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
		1076	needs_tvaudio: 1,
		1077	no_msp34xx: 1,
		1078	no_tda9875: 1,
		1079	pll: PLL_28,
		1080	tuner_type: -1,
		1081	audio_hook: pvbt878p9b_audio,
		1082	has_radio: 1,
		1083	},{
		1084	/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
		1085	/* you must jumper JP5 for the card to work */
		1086	name: "Sensoray 311",
		1087	video_inputs: 5,
		1088	audio_inputs: 0,
		1089	tuner: -1,
		1090	svhs: 4,
		1091	gpiomask: 0,
		1092	muxsel: { 2, 3, 1, 0, 0},
		1093	audiomux: { 0 },
		1094	needs_tvaudio: 0,
		1095	tuner_type: -1,
		1096	},{
		1097	/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
		1098	name: "RemoteVision MX (RV605)",
		1099	video_inputs: 16,
		1100	audio_inputs: 0,
		1101	tuner: -1,
		1102	svhs: -1,
		1103	gpiomask: 0x00,
		1104	gpiomask2: 0x07ff,
		1105	muxsel: { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
		1106	0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
		1107	no_msp34xx: 1,
		1108	no_tda9875: 1,
		1109	tuner_type: -1,
		1110	muxsel_hook: rv605_muxsel,
		1111	},{
		1112	name: "Powercolor MTV878/ MTV878R/ MTV878F",
		1113	video_inputs: 3,
		1114	audio_inputs: 2,
		1115	tuner: 0,
		1116	svhs: 2,
		1117	gpiomask: 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
		1118	muxsel: { 2, 1, 1, },
		1119	audiomux: { 0, 1, 2, 2, 4 },
		1120	needs_tvaudio: 0,
		1121	tuner_type: TUNER_PHILIPS_PAL,
		1122	pll: PLL_28,
		1123	has_radio: 1,
		1124	},{
		1125
		1126	/* ---- card 0x4c ---------------------------------- */
		1127	/* Masaki Suzuki <masaki@btree.org> */
		1128	name: "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
		1129	video_inputs: 3,
		1130	audio_inputs: 1,
		1131	tuner: 0,
		1132	svhs: 2,
		1133	gpiomask: 0x140007,
		1134	muxsel: { 2, 3, 1, 1 },
		1135	audiomux: { 0, 1, 2, 3, 4, 0 },
		1136	tuner_type: TUNER_PHILIPS_NTSC,
		1137	audio_hook: windvr_audio,
		1138	},{
		1139	name: "GrandTec Multi Capture Card (Bt878)",
		1140	video_inputs: 4,
		1141	audio_inputs: 0,
		1142	tuner: -1,
		1143	svhs: -1,
		1144	gpiomask: 0,
		1145	muxsel: { 2, 3, 1, 0 },
		1146	audiomux: { 0 },
		1147	needs_tvaudio: 0,
		1148	no_msp34xx: 1,
		1149	pll: PLL_28,
		1150	tuner_type: -1,
		1151	},{
		1152	/* http://www.aopen.com/products/video/va1000.htm */
		1153	name: "AOPEN VA1000",
		1154	video_inputs: 3, /* coax, AV, s-vid */
		1155	audio_inputs: 1,
		1156	tuner: 0,
		1157	tuner_type: TUNER_LG_PAL, /* actually TP18PSB12P (PAL B/G) */
		1158	audiomux: { 2, 0, 0, 0 },
		1159	muxsel: { 2, 3, 1, 0 },
		1160	pll: PLL_28,
		1161	},{
		1162	name: "Osprey 100/150 (878)", /* 0x1(2\|3)-45C6-C1 */
		1163	video_inputs: 4, /* id-inputs-clock */
		1164	audio_inputs: 0,
		1165	tuner: -1,
		1166	svhs: 3,
		1167	muxsel: { 3, 2, 0, 1 },
		1168	pll: PLL_28,
		1169	tuner_type: -1,
		1170	no_msp34xx: 1,
		1171	no_tda9875: 1,
		1172	no_tda7432: 1,
		1173	},{
		1174	/* ---- card 0x50 ---------------------------------- */
		1175	name: "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
		1176	video_inputs: 3,
		1177	audio_inputs: 0,
		1178	tuner: -1,
		1179	svhs: 2,
		1180	muxsel: { 2, 3, 1 },
		1181	pll: PLL_28,
		1182	tuner_type: -1,
		1183	no_msp34xx: 1,
		1184	no_tda9875: 1,
		1185	no_tda7432: 1,
		1186	},{
		1187	name: "Osprey 101 (848)", /* 0x05-40C0-C1 */
		1188	video_inputs: 2,
		1189	audio_inputs: 0,
		1190	tuner: -1,
		1191	svhs: 1,
		1192	muxsel: { 3, 1 },
		1193	pll: PLL_28,
		1194	tuner_type: -1,
		1195	no_msp34xx: 1,
		1196	no_tda9875: 1,
		1197	no_tda7432: 1,
		1198	},{
		1199	name: "Osprey 101/151", /* 0x1(4\|5)-0004-C4 */
		1200	video_inputs: 1,
		1201	audio_inputs: 0,
		1202	tuner: -1,
		1203	svhs: -1,
		1204	muxsel: { 0 },
		1205	pll: PLL_28,
		1206	tuner_type: -1,
		1207	no_msp34xx: 1,
		1208	no_tda9875: 1,
		1209	no_tda7432: 1,
		1210	},{
		1211	name: "Osprey 101/151 w/ svid", /* 0x(16\|17\|20)-00C4-C1 */
		1212	video_inputs: 2,
		1213	audio_inputs: 0,
		1214	tuner: -1,
		1215	svhs: 1,
		1216	muxsel: { 0, 1 },
		1217	pll: PLL_28,
		1218	tuner_type: -1,
		1219	no_msp34xx: 1,
		1220	no_tda9875: 1,
		1221	no_tda7432: 1,
		1222	},{
		1223	/* ---- card 0x54 ---------------------------------- */
		1224	name: "Osprey 200/201/250/251", /* 0x1(8\|9\|E\|F)-0004-C4 */
		1225	video_inputs: 1,
		1226	audio_inputs: 1,
		1227	tuner: -1,
		1228	svhs: -1,
		1229	muxsel: { 0 },
		1230	pll: PLL_28,
		1231	tuner_type: -1,
		1232	no_msp34xx: 1,
		1233	no_tda9875: 1,
		1234	no_tda7432: 1,
		1235	},{
		1236	name: "Osprey 200/250", /* 0x1(A\|B)-00C4-C1 */
		1237	video_inputs: 2,
		1238	audio_inputs: 1,
		1239	tuner: -1,
		1240	svhs: 1,
		1241	muxsel: { 0, 1 },
		1242	pll: PLL_28,
		1243	tuner_type: -1,
		1244	no_msp34xx: 1,
		1245	no_tda9875: 1,
		1246	no_tda7432: 1,
		1247	},{
		1248	name: "Osprey 210/220", /* 0x1(A\|B)-04C0-C1 */
		1249	video_inputs: 2,
		1250	audio_inputs: 1,
		1251	tuner: -1,
		1252	svhs: 1,
		1253	muxsel: { 2, 3 },
		1254	pll: PLL_28,
		1255	tuner_type: -1,
		1256	no_msp34xx: 1,
		1257	no_tda9875: 1,
		1258	no_tda7432: 1,
		1259	},{
		1260	name: "Osprey 5x0", /* 500 and 540 */
		1261	video_inputs: 2,
		1262	audio_inputs: 1,
		1263	tuner: -1,
		1264	svhs: 1,
		1265	muxsel: { 0, 1 },
		1266	pll: PLL_28,
		1267	tuner_type: -1,
		1268	no_msp34xx: 1,
		1269	no_tda9875: 1,
		1270	no_tda7432: 1,
		1271	},{
		1272	/* ---- card 0x58 ---------------------------------- */
		1273	name: "Osprey 2000", /* 2000 */
		1274	video_inputs: 2,
		1275	audio_inputs: 1,
		1276	tuner: -1,
		1277	svhs: 1,
		1278	muxsel: { 2, 3 },
		1279	pll: PLL_28,
		1280	tuner_type: -1,
		1281	no_msp34xx: 1,
		1282	no_tda9875: 1,
		1283	no_tda7432: 1, /* must avoid, conflicts with the bt860 */
		1284	}};
		1285
		1286	const int bttv_num_tvcards = (sizeof(bttv_tvcards)/sizeof(struct tvcard));
		1287
		1288	/* ----------------------------------------------------------------------- */
		1289
		1290	static unsigned char eeprom_data[256];
		1291
		1292	/*
		1293	* identify card
		1294	*/
		1295	void bttv_idcard(struct bttv *btv)
		1296	{
		1297	unsigned int gpiobits;
		1298	int i,type;
		1299	unsigned short tmp;
		1300
		1301	/* read PCI subsystem ID */
		1302	pci_read_config_word(btv->dev, 2, &tmp);
		1303	btv->cardid = tmp << 16;
		1304	pci_read_config_word(btv->dev, 0, &tmp);
		1305	btv->cardid \|= tmp;
		1306
		1307	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
		1308	/* look for the card */
		1309	for (type = -1, i = 0; cards[i].id != 0; i++)
		1310	if (cards[i].id == btv->cardid)
		1311	type = i;
		1312
		1313	if (type != -1) {
		1314	/* found it */
		1315	printk(KERN_INFO "bttv%d: %s [card=%d], "
		1316	"PCI ID is %04x:%04x\n",
		1317	btv->nr,cards[type].name,cards[type].cardnr,
		1318	btv->cardid & 0xffff, btv->cardid >> 16);
		1319	btv->type = cards[type].cardnr;
		1320	} else {
		1321	/* 404 */
		1322	printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
		1323	btv->nr, btv->cardid&0xffff, btv->cardid>>16);
		1324	}
		1325	}
		1326
		1327	/* let the user override the autodetected type */
		1328	if (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards)
		1329	btv->type=card[btv->nr];
		1330
		1331	/* print which card config we are using */
		1332	sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
		1333	btv->id,
		1334	(btv->id==848 && btv->revision==0x12) ? "A" : "",
		1335	bttv_tvcards[btv->type].name);
		1336	printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
		1337	btv->video_dev.name,btv->type,
		1338	(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
		1339	"insmod option" : "autodetected");
		1340
		1341	/* overwrite gpio stuff ?? */
		1342	if (-1 == audioall && -1 == audiomux[0])
		1343	return;
		1344
		1345	if (-1 != audiomux[0]) {
		1346	gpiobits = 0;
		1347	for (i = 0; i < 5; i++) {
		1348	bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
		1349	gpiobits \|= audiomux[i];
		1350	}
		1351	} else {
		1352	gpiobits = audioall;
		1353	for (i = 0; i < 5; i++) {
		1354	bttv_tvcards[btv->type].audiomux[i] = audioall;
		1355	}
		1356	}
		1357	bttv_tvcards[btv->type].gpiomask = (-1 != gpiomask) ? gpiomask : gpiobits;
		1358	cprintf("[info ] bttv%d: gpio config override: mask=0x%lx, mux=",
		1359	btv->nr,bttv_tvcards[btv->type].gpiomask);
		1360	for (i = 0; i < 5; i++) {
		1361	cprintf("%s0x%lx", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
		1362	}
		1363	cprintf("\n");
		1364	}
		1365
		1366	/*
		1367	* (most) board specific initialisations goes here
		1368	*/
		1369
		1370	static void flyvideo_gpio(struct bttv *btv)
		1371	{
		1372	int gpio,outbits;
		1373	int tuner=-1,ttype;
		1374
		1375	outbits = btread(BT848_GPIO_OUT_EN);
		1376	btwrite(0x00, BT848_GPIO_OUT_EN);
		1377	udelay(8); // without this we would see the 0x1800 mask
		1378	gpio=gpioread();
		1379	btwrite(outbits, BT848_GPIO_OUT_EN);
		1380	// all cards provide GPIO info, some have an additional eeprom
		1381
		1382	// lowest 3 bytes are remote control codes (no handshake needed)
		1383	ttype=(gpio&0x0f0000)>>16;
		1384	switch(ttype) {
		1385	case 0: tuner=4; // None
		1386	break;
		1387	case 4: tuner=5; // Philips PAL
		1388	break;
		1389	case 6: tuner=37; // LG PAL (newer TAPC series)
		1390	break;
		1391	case 0xC: tuner=3; // Philips SECAM(+PAL)
		1392	break;
		1393	default:
		1394	printk(KERN_INFO "bttv%d: flyvideo_gpio: unknown tuner type.\n", btv->nr);
		1395	}
		1396
		1397	printk(KERN_INFO "bttv%d: Flyvideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
		1398	btv->nr,
		1399	gpio&0x400000? "yes":"no",
		1400	gpio&0x800000? "yes":"no", tuner, gpio);
		1401
		1402	btv->tuner_type = tuner;
		1403	btv->has_radio = gpio&0x400000? 1:0;
		1404	}
		1405
		1406	int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
		1407	14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
		1408	int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
		1409	1,1,1,1, 1,1,1,0, 0,0,0,0, 0,0,0,0 };
		1410
		1411	/* initialization part one -- before registering i2c bus */
		1412	void bttv_init_card1(struct bttv *btv)
		1413	{
		1414	if (btv->type == BTTV_HAUPPAUGE \|\| btv->type == BTTV_HAUPPAUGE878)
		1415	boot_msp34xx(btv,5);
		1416	if (btv->type == BTTV_VOODOOTV_FM)
		1417	boot_msp34xx(btv,20);
		1418
		1419	/printk("bttv: end of init -- pre i2c\n");/
		1420	}
		1421
		1422	/* initialization part one -- after registering i2c bus */
		1423	void bttv_init_card2(struct bttv *btv)
		1424	{
		1425	/* miro/pinnacle */
		1426	if (btv->type == BTTV_MIRO \|\|
		1427	btv->type == BTTV_MIROPRO \|\|
		1428	btv->type == BTTV_PINNACLE \|\|
		1429	btv->type == BTTV_PINNACLEPRO) {
		1430	int id,msp;
		1431	id = ((gpioread()>>10) & 31) -1;
		1432	msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
		1433	btv->tuner_type = miro_tunermap[id];
		1434	if (0 == (gpioread() & 0x20)) {
		1435	btv->has_radio = 1;
		1436	if (!miro_fmtuner[id]) {
		1437	btv->has_matchbox = 1;
		1438	btv->mbox_we = (1<<6);
		1439	btv->mbox_most = (1<<7);
		1440	btv->mbox_clk = (1<<8);
		1441	btv->mbox_data = (1<<9);
		1442	btv->mbox_mask = (1<<6)\|(1<<7)\|(1<<8)\|(1<<9);
		1443	}
		1444	} else {
		1445	btv->has_radio = 0;
		1446	}
		1447	if (-1 != msp) {
		1448	if (btv->type == BTTV_MIRO)
		1449	btv->type = BTTV_MIROPRO;
		1450	if (btv->type == BTTV_PINNACLE)
		1451	btv->type = BTTV_PINNACLEPRO;
		1452	}
		1453	if (bttv_verbose)
		1454	printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d "
		1455	"radio=%s stereo=%s\n",
		1456	btv->nr, id+1, btv->tuner_type,
		1457	!btv->has_radio ? "no" :
		1458	(btv->has_matchbox ? "matchbox" : "fmtuner"),
		1459	(-1 == msp) ? "no" : "yes");
		1460	#if 0
		1461	if (btv->has_matchbox) {
		1462	if (bttv_verbose)
		1463	printk(KERN_INFO "Initializing TEA5757...\n");
		1464	init_tea5757(btv);
		1465	}
		1466	#endif
		1467	}
		1468
		1469	if (btv->type == BTTV_FLYVIDEO_98 \|\|
		1470	btv->type == BTTV_FLYVIDEO \|\|
		1471	btv->type == BTTV_TYPHOON_TVIEW \|\|
		1472	btv->type == BTTV_CHRONOS_VS2 \|\|
		1473	btv->type == BTTV_FLYVIDEO_98FM \|\|
		1474	btv->type == BTTV_FLYVIDEO2000 \|\|
		1475	btv->type == BTTV_FLYVIDEO98EZ)
		1476	flyvideo_gpio(btv);
		1477
		1478	if (btv->type == BTTV_HAUPPAUGE \|\| btv->type == BTTV_HAUPPAUGE878) {
		1479	/* pick up some config infos from the eeprom */
		1480	bttv_readee(btv,eeprom_data,0xa0);
		1481	hauppauge_eeprom(btv);
		1482	}
		1483
		1484	if ((btv->type >= BTTV_OSPREY_BEGIN) && (btv->type <= BTTV_OSPREY_END)) {
		1485	/* check for config info in the eeprom */
		1486	bttv_readee(btv,eeprom_data,0xa0);
		1487	osprey_eeprom(btv);
		1488	}
		1489
		1490	if (btv->type == BTTV_AVERMEDIA98 \|\| btv->type == BTTV_AVPHONE98) {
		1491	bttv_readee(btv,eeprom_data,0xa0);
		1492	avermedia_eeprom(btv);
		1493	}
		1494
		1495	if (btv->type == BTTV_PXC200)
		1496	init_PXC200(btv);
		1497
		1498	if (btv->type == BTTV_VHX) {
		1499	btv->has_radio = 1;
		1500	btv->has_matchbox = 1;
		1501	btv->mbox_we = 0x20;
		1502	btv->mbox_most = 0;
		1503	btv->mbox_clk = 0x08;
		1504	btv->mbox_data = 0x10;
		1505	btv->mbox_mask = 0x38;
		1506	}
		1507
		1508	if (btv->type == BTTV_LIFETEC_9415) {
		1509	if (gpioread() & 0x4000)
		1510	cprintf("bttv%d: lifetec: tv mono/fm stereo card\n", btv->nr);
		1511	else
		1512	cprintf("bttv%d: lifetec: stereo(TDA9821) card\n",btv->nr);
		1513	}
		1514
		1515	if (btv->type == BTTV_MAGICTVIEW061) {
		1516	if(btv->cardid == 0x4002144f) {
		1517	btv->has_radio=1;
		1518	cprintf("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
		1519	}
		1520	}
		1521
		1522	/* pll configuration */
		1523	if (!(btv->id==848 && btv->revision==0x11)) {
		1524	/* defaults from card list */
		1525	if (PLL_28 == bttv_tvcards[btv->type].pll) {
		1526	btv->pll.pll_ifreq=28636363;
		1527	btv->pll.pll_crystal=BT848_IFORM_XT0;
		1528	}
		1529	if (PLL_35 == bttv_tvcards[btv->type].pll) {
		1530	btv->pll.pll_ifreq=35468950;
		1531	btv->pll.pll_crystal=BT848_IFORM_XT1;
		1532	}
		1533	/* insmod options can override */
		1534	switch (pll[btv->nr]) {
		1535	case 0: /* none */
		1536	btv->pll.pll_crystal = 0;
		1537	btv->pll.pll_ifreq = 0;
		1538	btv->pll.pll_ofreq = 0;
		1539	break;
		1540	case 1: /* 28 MHz */
		1541	case 28:
		1542	btv->pll.pll_ifreq = 28636363;
		1543	btv->pll.pll_ofreq = 0;
		1544	btv->pll.pll_crystal = BT848_IFORM_XT0;
		1545	break;
		1546	case 2: /* 35 MHz */
		1547	case 35:
		1548	btv->pll.pll_ifreq = 35468950;
		1549	btv->pll.pll_ofreq = 0;
		1550	btv->pll.pll_crystal = BT848_IFORM_XT1;
		1551	break;
		1552	}
		1553	}
		1554
		1555	/* tuner configuration (from card list / insmod option) */
		1556	if (-1 != bttv_tvcards[btv->type].tuner_type)
		1557	btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
		1558	if (-1 != tuner[btv->nr])
		1559	btv->tuner_type = tuner[btv->nr];
		1560
		1561	if (bttv_tvcards[btv->type].has_radio)
		1562	btv->has_radio=1;
		1563
		1564	/* try to detect audio/fader chips */
		1565	if (!bttv_tvcards[btv->type].no_msp34xx &&
		1566	bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
		1567	}
		1568
		1569	if (!bttv_tvcards[btv->type].no_tda9875 &&
		1570	bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
		1571	}
		1572
		1573	if (!bttv_tvcards[btv->type].no_tda7432 &&
		1574	bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
		1575	}
		1576
		1577	if (bttv_tvcards[btv->type].needs_tvaudio) {
		1578	}
		1579
		1580	if (bttv_tvcards[btv->type].tuner != -1) {
		1581	}
		1582	}
		1583
		1584
		1585	/* ----------------------------------------------------------------------- */
		1586	/* some hauppauge specific stuff */
		1587
		1588	static struct HAUPPAUGE_TUNER
		1589	{
		1590	int id;
		1591	char *name;
		1592	}
		1593	hauppauge_tuner[] =
		1594	{
		1595	{ TUNER_ABSENT, "" },
		1596	{ TUNER_ABSENT, "External" },
		1597	{ TUNER_ABSENT, "Unspecified" },
		1598	{ TUNER_PHILIPS_PAL, "Philips FI1216" },
		1599	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
		1600	{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
		1601	{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
		1602	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
		1603	{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
		1604	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
		1605	{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
		1606	{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
		1607	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
		1608	{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
		1609	{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
		1610	{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
		1611	{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
		1612	{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
		1613	{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
		1614	{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
		1615	{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
		1616	{ TUNER_PHILIPS_PAL, "Philips FM1216" },
		1617	{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
		1618	{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
		1619	{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
		1620	{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
		1621	{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
		1622	{ TUNER_ABSENT, "Samsung TCPN9082D" },
		1623	{ TUNER_ABSENT, "Samsung TCPM9092P" },
		1624	{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
		1625	{ TUNER_ABSENT, "Samsung TCPN9085D" },
		1626	{ TUNER_ABSENT, "Samsung TCPB9085P" },
		1627	{ TUNER_ABSENT, "Samsung TCPL9091P" },
		1628	{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
		1629	{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
		1630	{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
		1631	{ TUNER_ABSENT, "Philips TD1536" },
		1632	{ TUNER_ABSENT, "Philips TD1536D" },
		1633	{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
		1634	{ TUNER_ABSENT, "Philips FI1256MP" },
		1635	{ TUNER_ABSENT, "Samsung TCPQ9091P" },
		1636	{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
		1637	{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
		1638	{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
		1639	{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
		1640	{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
		1641	{ TUNER_LG_NTSC_FM, "LG TP18NSR01F"},
		1642	{ TUNER_LG_PAL_FM, "LG TP18PSB01D"},
		1643	{ TUNER_LG_PAL, "LG TP18PSB11D"},
		1644	{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
		1645	{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
		1646	};
		1647
		1648	static void hauppauge_eeprom(struct bttv *btv)
		1649	{
		1650	int blk2,tuner,radio,model;
		1651
		1652	if (eeprom_data[0] != 0x84 \|\| eeprom_data[2] != 0)
		1653	printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
		1654	btv->nr);
		1655
		1656	/* Block 2 starts after len+3 bytes header */
		1657	blk2 = eeprom_data[1] + 3;
		1658
		1659	/* decode + use some config infos */
		1660	model = eeprom_data[12] << 8 \| eeprom_data[11];
		1661	tuner = eeprom_data[9];
		1662	radio = eeprom_data[blk2-1] & 0x01;
		1663
		1664	if (tuner < sizeof(hauppauge_tuner)/sizeof(struct HAUPPAUGE_TUNER))
		1665	btv->tuner_type = hauppauge_tuner[tuner].id;
		1666	if (radio)
		1667	btv->has_radio = 1;
		1668
		1669	if (bttv_verbose)
		1670	printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
		1671	"tuner=%s (%d), radio=%s\n",
		1672	btv->nr, model, hauppauge_tuner[tuner].name,
		1673	btv->tuner_type, radio ? "yes" : "no");
		1674	}
		1675
		1676	static void osprey_eeprom(struct bttv *btv)
		1677	{
		1678	int i = 0;
		1679	int detected_type = btv->type;
		1680	unsigned char *ee = eeprom_data;
		1681	unsigned long serial = 0;
		1682
		1683	if (bttv_debug) {
		1684	printk(KERN_INFO "Osprey: EEPROM dump\n");
		1685	for(;i<256; i+= 16) {
		1686	cprintf("[info ] Osprey 100:(%02X) %02X %02X %02X %02X %02X %02X %02X %02X -- %02X %02X %02X %02X %02X %02X %02X %02X\n",
		1687	i,ee[i+ 0],ee[i+ 1],ee[i+ 2],ee[i+ 3],
		1688	ee[i+ 4],ee[i+ 5],ee[i+ 6],ee[i+ 7],
		1689	ee[i+ 8],ee[i+ 9],ee[i+10],ee[i+11],
		1690	ee[i+12],ee[i+13],ee[i+14],ee[i+15] );
		1691	}
		1692	}
		1693
		1694	if (btv->type == 0) {
		1695	/* this might be an antique...check for MMAC label in eeprom */
		1696	if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
		1697	unsigned char checksum = 0;
		1698	/* that looks like an old card...verify checksum */
		1699	for (i =0; i<21; i++) checksum += ee[i];
		1700	if (checksum == ee[21]) {
		1701	btv->type = BTTV_OSPREY1x0_848;
		1702	for (i = 12; i < 21; i++) serial *= 10,serial += ee[i] - '0';
		1703	}
		1704	}
		1705	} else {
		1706	/* we know this is an osprey card, find a valid eeprom descriptor */
		1707	int offset = 4*16;
		1708
		1709	for(; offset < 8*16; offset += 16) {
		1710	unsigned short checksum = 0;
		1711	/* verify the checksum */
		1712	for(i = 0; i<14; i++) checksum += ee[i+offset];
		1713	checksum = ~checksum; /* no idea why */
		1714	if ((((checksum>>8) & 0x0FF) == ee[offset+14]) &&
		1715	((checksum & 0x0FF) == ee[offset+15])) {
		1716	break;
		1717	}
		1718	}
		1719
		1720	if (offset < 8*16) {
		1721	/* found a valid descriptor */
		1722	unsigned short type = (ee[offset+4]<<8) \| (ee[offset+5]);
		1723
		1724	switch(type) {
		1725	/* 848 based */
		1726	case 0x0004: {
		1727	btv->type = BTTV_OSPREY1x0_848;
		1728	break;
		1729	}
		1730	case 0x0005: {
		1731	btv->type = BTTV_OSPREY101_848;
		1732	break;
		1733	}
		1734	/* 878 based */
		1735	case 0x0012:
		1736	case 0x0013: {
		1737	btv->type = BTTV_OSPREY1x0;
		1738	break;
		1739	}
		1740	case 0x0014:
		1741	case 0x0015: {
		1742	btv->type = BTTV_OSPREY1x1;
		1743	break;
		1744	}
		1745	case 0x0016:
		1746	case 0x0017:
		1747	case 0x0020: {
		1748	btv->type = BTTV_OSPREY1x1_SVID;
		1749	break;
		1750	}
		1751	case 0x0018:
		1752	case 0x0019:
		1753	case 0x001E:
		1754	case 0x001F: {
		1755	btv->type = BTTV_OSPREY2xx;
		1756	break;
		1757	}
		1758	case 0x001A:
		1759	case 0x001B: {
		1760	btv->type = BTTV_OSPREY2x0_SVID;
		1761	break;
		1762	}
		1763	case 0x0060:
		1764	case 0x0070: {
		1765	btv->type = BTTV_OSPREY2x0;
		1766	//enable output on select control lines
		1767	btwrite(0x000303, BT848_GPIO_OUT_EN);
		1768	break;
		1769	}
		1770	default: {
		1771	/* unknown...leave as generic, but get a serial # */
		1772	break;
		1773	}
		1774	}
		1775
		1776	serial = (ee[offset+6] << 24)
		1777	\| (ee[offset+7] << 16)
		1778	\| (ee[offset+8] << 8)
		1779	\| (ee[offset+9]);
		1780	}
		1781	}
		1782
		1783	if ((btv->type != detected_type) \|\| (serial != 0)){
		1784	/* reprint which card config we are using */
		1785	sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
		1786	btv->id,
		1787	(btv->id==848 && btv->revision==0x12) ? "A" : "",
		1788	bttv_tvcards[btv->type].name);
		1789	printk(KERN_INFO "bttv%d: is now:%s [card=%d,%s] Serial#: %ld\n",
		1790	btv->nr,
		1791	btv->video_dev.name,
		1792	btv->type,
		1793	(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
		1794	"insmod option" : "autodetected",
		1795	serial);
		1796	}
		1797	}
		1798
		1799
		1800	/* ----------------------------------------------------------------------- */
		1801	/* AVermedia specific stuff, from bktr_card.c */
		1802
		1803	int tuner_0_table[] = {
		1804	TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL,
		1805	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		1806	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		1807	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
		1808	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
		1809	#if 0
		1810	int tuner_0_fm_table[] = {
		1811	PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
		1812	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		1813	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		1814	PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
		1815	PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
		1816	#endif
		1817
		1818	int tuner_1_table[] = {
		1819	TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
		1820	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		1821	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		1822	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
		1823	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
		1824
		1825	static void avermedia_eeprom(struct bttv *btv)
		1826	{
		1827	int tuner_make,tuner_tv_fm,tuner_format,tuner=0,remote;
		1828
		1829	tuner_make = (eeprom_data[0x41] & 0x7);
		1830	tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
		1831	tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
		1832	remote = (eeprom_data[0x42] & 0x01);
		1833
		1834	if (tuner_make == 0 \|\| tuner_make == 2)
		1835	if(tuner_format <=9)
		1836	tuner = tuner_0_table[tuner_format];
		1837	if (tuner_make == 1)
		1838	if(tuner_format <=9)
		1839	tuner = tuner_1_table[tuner_format];
		1840
		1841	cprintf("[info ] bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
		1842	btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
		1843	if(tuner) {
		1844	btv->tuner_type=tuner;
		1845	cprintf("%d",tuner);
		1846	} else
		1847	cprintf("Unknown type");
		1848	cprintf(" radio:%s remote control:%s\n",
		1849	tuner_tv_fm?"yes":"no",
		1850	remote?"yes":"no");
		1851	}
		1852
		1853	/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
		1854	void bttv_tda9880_setnorm(struct bttv *btv, int norm)
		1855	{
		1856	// fix up our card entry
		1857	if(norm==VIDEO_MODE_NTSC) {
		1858	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
		1859	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
		1860	dprintk("bttv_tda9880_setnorm to NTSC\n");
		1861	}
		1862	else {
		1863	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
		1864	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
		1865	dprintk("bttv_tda9880_setnorm to PAL\n");
		1866	}
		1867	// set GPIO according
		1868	gpioaor(bttv_tvcards[btv->type].audiomux[btv->audio],
		1869	~bttv_tvcards[btv->type].gpiomask);
		1870	}
		1871
		1872
		1873	/*
		1874	* reset/enable the MSP on some Hauppauge cards
		1875	* Thanks to Ky�sti M�lkki (kmalkki@cc.hut.fi)!
		1876	*
		1877	* Hauppauge: pin 5
		1878	* Voodoo: pin 20
		1879	*/
		1880	static void boot_msp34xx(struct bttv *btv, int pin)
		1881	{
		1882	int mask = (1 << pin);
		1883
		1884	btor(mask, BT848_GPIO_OUT_EN);
		1885	gpioand(~mask);
		1886	udelay(2500);
		1887	gpioor(mask);
		1888	if (bttv_gpio)
		1889	bttv_gpio_tracking(btv,"msp34xx");
		1890
		1891	if (bttv_verbose)
		1892	printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
		1893	"init [%d]\n", btv->nr, pin);
		1894	}
		1895
		1896
		1897	/* ----------------------------------------------------------------------- */
		1898	/* Imagenation L-Model PXC200 Framegrabber */
		1899	/* This is basically the same procedure as
		1900	* used by Alessandro Rubini in his pxc200
		1901	* driver, but using BTTV functions */
		1902
		1903	static void init_PXC200(struct bttv *btv)
		1904	{
		1905	/* Initialise GPIO-connevted stuff */
		1906	btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
		1907	gpiowrite(0);
		1908	udelay(3);
		1909	gpiowrite(1<<13);
		1910	/* GPIO inputs are pulled up, so no need to drive
		1911	* reset pin any longer */
		1912	btwrite(0,BT848_GPIO_OUT_EN);
		1913	if (bttv_gpio)
		1914	bttv_gpio_tracking(btv,"pxc200");
		1915
		1916	/* we could/should try and reset/control the AD pots? but
		1917	right now we simply turned off the crushing. Without
		1918	this the AGC drifts drifts
		1919	remember the EN is reverse logic -->
		1920	setting BT848_ADC_AGC_EN disable the AGC
		1921	tboult@eecs.lehigh.edu
		1922	*/
		1923	btwrite(BT848_ADC_RESERVED\|BT848_ADC_AGC_EN, BT848_ADC);
		1924
		1925	/* Initialise MAX517 DAC */
		1926	printk(KERN_INFO "Setting DAC reference voltage level ...\n");
		1927	bttv_I2CWrite(btv,0x5E,0,0x80,1);
		1928
		1929	/* Initialise 12C508 PIC */
		1930	/* The I2CWrite and I2CRead commmands are actually to the
		1931	* same chips - but the R/W bit is included in the address
		1932	* argument so the numbers are different */
		1933
		1934	printk(KERN_INFO "PXC200 Initialised.\n");
		1935	}
		1936
		1937	/* ----------------------------------------------------------------------- */
		1938	/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
		1939	/*
		1940	* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
		1941	* This code is placed under the terms of the GNU General Public License
		1942	*
		1943	* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
		1944	*/
		1945
		1946	#if 0
		1947	/* bus bits on the GPIO port */
		1948	#define TEA_WE 6
		1949	#define TEA_DATA 9
		1950	#define TEA_CLK 8
		1951	#define TEA_MOST 7
		1952	#endif
		1953
		1954	#define BUS_LOW(bit) gpioand(~(bit))
		1955	#define BUS_HIGH(bit) gpioor((bit))
		1956	#define BUS_IN(bit) (gpioread() & (bit))
		1957
		1958	/* TEA5757 register bits */
		1959	#define TEA_FREQ 0:14
		1960	#define TEA_BUFFER 15:15
		1961
		1962	#define TEA_SIGNAL_STRENGTH 16:17
		1963
		1964	#define TEA_PORT1 18:18
		1965	#define TEA_PORT0 19:19
		1966
		1967	#define TEA_BAND 20:21
		1968	#define TEA_BAND_FM 0
		1969	#define TEA_BAND_MW 1
		1970	#define TEA_BAND_LW 2
		1971	#define TEA_BAND_SW 3
		1972
		1973	#define TEA_MONO 22:22
		1974	#define TEA_ALLOW_STEREO 0
		1975	#define TEA_FORCE_MONO 1
		1976
		1977	#define TEA_SEARCH_DIRECTION 23:23
		1978	#define TEA_SEARCH_DOWN 0
		1979	#define TEA_SEARCH_UP 1
		1980
		1981	#define TEA_STATUS 24:24
		1982	#define TEA_STATUS_TUNED 0
		1983	#define TEA_STATUS_SEARCHING 1
		1984
		1985	/* ----------------------------------------------------------------------- */
		1986	/* winview */
		1987
		1988	void winview_audio(struct bttv btv, struct video_audio v, int set)
		1989	{
		1990	/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
		1991	int bits_out, loops, vol, data;
		1992
		1993	if (!set) {
		1994	/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
		1995	v->flags \|= VIDEO_AUDIO_VOLUME;
		1996	return;
		1997	}
		1998
		1999	/* 32 levels logarithmic */
		2000	vol = 32 - ((v->volume>>11));
		2001	/* units */
		2002	bits_out = (PT2254_DBS_IN_2>>(vol%5));
		2003	/* tens */
		2004	bits_out \|= (PT2254_DBS_IN_10>>(vol/5));
		2005	bits_out \|= PT2254_L_CHANNEL \| PT2254_R_CHANNEL;
		2006	data = gpioread();
		2007	data &= ~(WINVIEW_PT2254_CLK\| WINVIEW_PT2254_DATA\|
		2008	WINVIEW_PT2254_STROBE);
		2009	for (loops = 17; loops >= 0 ; loops--) {
		2010	if (bits_out & (1<<loops))
		2011	data \|= WINVIEW_PT2254_DATA;
		2012	else
		2013	data &= ~WINVIEW_PT2254_DATA;
		2014	gpiowrite(data);
		2015	udelay(5);
		2016	data \|= WINVIEW_PT2254_CLK;
		2017	gpiowrite(data);
		2018	udelay(5);
		2019	data &= ~WINVIEW_PT2254_CLK;
		2020	gpiowrite(data);
		2021	}
		2022	data \|= WINVIEW_PT2254_STROBE;
		2023	data &= ~WINVIEW_PT2254_DATA;
		2024	gpiowrite(data);
		2025	udelay(10);
		2026	data &= ~WINVIEW_PT2254_STROBE;
		2027	gpiowrite(data);
		2028	}
		2029
		2030	/* ----------------------------------------------------------------------- */
		2031	/* mono/stereo control for various cards (which don't use i2c chips but */
		2032	/* connect something to the GPIO pins */
		2033
		2034	static void
		2035	gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set)
		2036	{
		2037	unsigned int con = 0;
		2038
		2039	if (set) {
		2040	btor(0x300, BT848_GPIO_OUT_EN);
		2041	if (v->mode & VIDEO_SOUND_LANG1)
		2042	con = 0x000;
		2043	if (v->mode & VIDEO_SOUND_LANG2)
		2044	con = 0x300;
		2045	if (v->mode & VIDEO_SOUND_STEREO)
		2046	con = 0x200;
		2047	// if (v->mode & VIDEO_SOUND_MONO)
		2048	// con = 0x100;
		2049	gpioaor(con, ~0x300);
		2050	} else {
		2051	v->mode = VIDEO_SOUND_STEREO \|
		2052	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2053	}
		2054	}
		2055
		2056	/*
		2057	* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
		2058	* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
		2059	* 0xdde enables mono and 0xccd enables sap
		2060	*
		2061	* Petr Vandrovec <VANDROVE@vc.cvut.cz>
		2062	* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
		2063	* input/output sound connection, so both must be set for output mode.
		2064	*
		2065	* Looks like it's needed only for the "tvphone", the "tvphone 98"
		2066	* handles this with a tda9840
		2067	*
		2068	*/
		2069	static void
		2070	avermedia_tvphone_audio(struct bttv btv, struct video_audio v, int set)
		2071	{
		2072	int val = 0;
		2073
		2074	if (set) {
		2075	if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
		2076	val = 0x02;
		2077	if (v->mode & VIDEO_SOUND_STEREO)
		2078	val = 0x01;
		2079	if (val) {
		2080	gpioaor(val, ~0x03);
		2081	if (bttv_gpio)
		2082	bttv_gpio_tracking(btv,"avermedia");
		2083	}
		2084	} else {
		2085	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2086	VIDEO_SOUND_LANG1;
		2087	return;
		2088	}
		2089	}
		2090
		2091	/* Lifetec 9415 handling */
		2092	static void
		2093	lt9415_audio(struct bttv btv, struct video_audio v, int set)
		2094	{
		2095	int val = 0;
		2096
		2097	if (gpioread() & 0x4000) {
		2098	v->mode = VIDEO_SOUND_MONO;
		2099	return;
		2100	}
		2101
		2102	if (set) {
		2103	if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
		2104	val = 0x0080;
		2105	if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
		2106	val = 0x0880;
		2107	if ((v->mode & VIDEO_SOUND_LANG1) \|\|
		2108	(v->mode & VIDEO_SOUND_MONO))
		2109	val = 0;
		2110	gpioaor(val, ~0x0880);
		2111	if (bttv_gpio)
		2112	bttv_gpio_tracking(btv,"lt9415");
		2113	} else {
		2114	/* autodetect doesn't work with this card :-( */
		2115	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2116	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2117	return;
		2118	}
		2119	}
		2120
		2121
		2122	static void
		2123	terratv_audio(struct bttv btv, struct video_audio v, int set)
		2124	{
		2125	unsigned int con = 0;
		2126
		2127	if (set) {
		2128	btor(0x180000, BT848_GPIO_OUT_EN);
		2129	if (v->mode & VIDEO_SOUND_LANG2)
		2130	con = 0x080000;
		2131	if (v->mode & VIDEO_SOUND_STEREO)
		2132	con = 0x180000;
		2133	gpioaor(con, ~0x180000);
		2134	if (bttv_gpio)
		2135	bttv_gpio_tracking(btv,"terratv");
		2136	} else {
		2137	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2138	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2139	}
		2140	}
		2141
		2142	static void
		2143	winfast2000_audio(struct bttv btv, struct video_audio v, int set)
		2144	{
		2145	unsigned long val = 0;
		2146
		2147	if (set) {
		2148	/btor (0xc32000, BT848_GPIO_OUT_EN);/
		2149	if (v->mode & VIDEO_SOUND_MONO) /* Mono */
		2150	val = 0x420000;
		2151	if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
		2152	val = 0x420000;
		2153	if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
		2154	val = 0x410000;
		2155	if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
		2156	val = 0x020000;
		2157	if (val) {
		2158	gpioaor(val, ~0x430000);
		2159	if (bttv_gpio)
		2160	bttv_gpio_tracking(btv,"winfast2000");
		2161	}
		2162	} else {
		2163	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2164	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2165	}
		2166	}
		2167
		2168	/*
		2169	* Dariusz Kowalewski <darekk@automex.pl>
		2170	* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
		2171	* revision 9B has on-board TDA9874A sound decoder).
		2172	*/
		2173	static void
		2174	pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set)
		2175	{
		2176	unsigned int val = 0;
		2177
		2178	if (btv->radio)
		2179	return;
		2180
		2181	if (set) {
		2182	if (v->mode & VIDEO_SOUND_MONO) {
		2183	val = 0x01;
		2184	}
		2185	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		2186	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		2187	val = 0x02;
		2188	}
		2189	if (val) {
		2190	gpioaor(val, ~0x03);
		2191	if (bttv_gpio)
		2192	bttv_gpio_tracking(btv,"pvbt878p9b");
		2193	}
		2194	} else {
		2195	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2196	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2197	}
		2198	}
		2199
		2200	/*
		2201	* Dariusz Kowalewski <darekk@automex.pl>
		2202	* sound control for FlyVideo 2000S (with tda9874 decoder)
		2203	* based on pvbt878p9b_audio() - this is not tested, please fix!!!
		2204	*/
		2205	static void
		2206	fv2000s_audio(struct bttv btv, struct video_audio v, int set)
		2207	{
		2208	unsigned int val = 0xffff;
		2209
		2210	if (btv->radio)
		2211	return;
		2212
		2213	if (set) {
		2214	if (v->mode & VIDEO_SOUND_MONO) {
		2215	val = 0x0000;
		2216	}
		2217	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		2218	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		2219	val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
		2220	}
		2221	if (val != 0xffff) {
		2222	gpioaor(val, ~0x1800);
		2223	if (bttv_gpio)
		2224	bttv_gpio_tracking(btv,"fv2000s");
		2225	}
		2226	} else {
		2227	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2228	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2229	}
		2230	}
		2231
		2232	/*
		2233	* sound control for Canopus WinDVR PCI
		2234	* Masaki Suzuki <masaki@btree.org>
		2235	*/
		2236	static void
		2237	windvr_audio(struct bttv btv, struct video_audio v, int set)
		2238	{
		2239	unsigned long val = 0;
		2240
		2241	if (set) {
		2242	if (v->mode & VIDEO_SOUND_MONO)
		2243	val = 0x040000;
		2244	if (v->mode & VIDEO_SOUND_LANG1)
		2245	val = 0;
		2246	if (v->mode & VIDEO_SOUND_LANG2)
		2247	val = 0x100000;
		2248	if (v->mode & VIDEO_SOUND_STEREO)
		2249	val = 0;
		2250	if (val) {
		2251	gpioaor(val, ~0x140000);
		2252	if (bttv_gpio)
		2253	bttv_gpio_tracking(btv,"windvr");
		2254	}
		2255	} else {
		2256	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2257	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2258	}
		2259	}
		2260
		2261	/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
		2262	*
		2263	* This is needed because rv605 don't use a normal multiplex, but a crosspoint
		2264	* switch instead (CD22M3494E). This IC can have multiple active connections
		2265	* between Xn (input) and Yn (output) pins. We need to clear any existing
		2266	* connection prior to establish a new one, pulsing the STROBE pin.
		2267	*
		2268	* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
		2269	* GPIO pins are wired as:
		2270	* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
		2271	* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
		2272	* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
		2273	* GPIO[8] - - P3[5] (microcontroler)
		2274	* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
		2275	* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
		2276	* GPINTR - - P3[4] (microcontroler)
		2277	*
		2278	* The microcontroler is a 80C32 like. It should be possible to change xpoint
		2279	* configuration either directly (as we are doing) or using the microcontroler
		2280	* which is also wired to I2C interface. I have no further info on the
		2281	* microcontroler features, one would need to disassembly the firmware.
		2282	* note: the vendor refused to give any information on this product, all
		2283	* that stuff was found using a multimeter! :)
		2284	*/
		2285	static void rv605_muxsel(struct bttv *btv, unsigned int input)
		2286	{
		2287	/* reset all conections */
		2288	gpioaor(0x200,~0x200);
		2289	udelay(1000);
		2290	gpioaor(0x000,~0x200);
		2291	udelay(1000);
		2292
		2293	/* create a new conection */
		2294	gpioaor(0x080,~0x480);
		2295	gpioaor(0x480,~0x480);
		2296	udelay(1000);
		2297	gpioaor(0x080,~0x480);
		2298	udelay(1000);
		2299	}
		2300
		2301
		2302	/* ----------------------------------------------------------------------- */
		2303	/* motherboard chipset specific stuff */
		2304
		2305	void bttv_check_chipset(void)
		2306	{
		2307	int pcipci_fail = 0;
		2308	struct pci_dev dev;
		2309	BYTE bus, dv;
		2310
		2311	triton1 = 1;
		2312
		2313	if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, 0, &bus, &dv)) pcipci_fail = 1;
		2314	if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, 0, &bus, &dv)) pcipci_fail = 1;
		2315	if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, 0, &bus, &dv)) triton1 = 1;
		2316	if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, 0, &bus, &dv)) triton1 = 1;
		2317	if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, 0, &bus, &dv)) triton1 = 1;
		2318	if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, 0, &bus, &dv)) vsfx = 1;
		2319
		2320	/* print warnings about any quirks found */
		2321	if (triton1)
		2322	printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
		2323	if (vsfx)
		2324	printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
		2325
		2326	if (pcipci_fail) {
		2327	printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
		2328	if (-1 == no_overlay) {
		2329	printk(KERN_WARNING "bttv: going to disable overlay.\n");
		2330	no_overlay = 1;
		2331	}
		2332	}
		2333
		2334	if(pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, 0, &bus, &dv)) {
		2335	unsigned char b;
		2336	dev.bus->number = bus;
		2337	dev.devfn = dv;
		2338	pci_read_config_byte(&dev, 0x53, &b);
		2339	if (bttv_debug)
		2340	printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
		2341	"bufcon=0x%02x\n",b);
		2342	}
		2343
		2344	}
		2345
		2346	int bttv_handle_chipset(struct bttv *btv)
		2347	{
		2348	unsigned char command;
		2349
		2350	if (!triton1 && !vsfx)
		2351	return 0;
		2352
		2353	if (bttv_verbose) {
		2354	if (triton1)
		2355	printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
		2356	if (vsfx && btv->id >= 878)
		2357	printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
		2358	}
		2359
		2360	if (btv->id < 878) {
		2361	/* bt848 (mis)uses a bit in the irq mask for etbf */
		2362	if (triton1)
		2363	btv->triton1 = BT848_INT_ETBF;
		2364	} else {
		2365	/* bt878 has a bit in the pci config space for it */
		2366	pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
		2367	if (triton1)
		2368	command \|= BT878_EN_TBFX;
		2369	if (vsfx)
		2370	command \|= BT878_EN_VSFX;
		2371	pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
		2372	}
		2373	return 0;
		2374	}
		2375

Subversion Repositories shark

(root)/shark/trunk/drivers/bttv/bttv-cards.c - Rev 180