WebSVN - shark - Blame - Rev 181 - /shark/trunk/drivers/bttv/bttv-cards.c

Rev	Author	Line No.	Line
170	giacomo	1	/*
		2	bttv-cards.c
		3
		4	this file has configuration informations - card-specific stuff
		5	like the big tvcards array for the most part
		6
		7	Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
		8	& Marcus Metzler (mocm@thp.uni-koeln.de)
		9	(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
		10
		11	This program is free software; you can redistribute it and/or modify
		12	it under the terms of the GNU General Public License as published by
		13	the Free Software Foundation; either version 2 of the License, or
		14	(at your option) any later version.
		15
		16	This program is distributed in the hope that it will be useful,
		17	but WITHOUT ANY WARRANTY; without even the implied warranty of
		18	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		19	GNU General Public License for more details.
		20
		21	You should have received a copy of the GNU General Public License
		22	along with this program; if not, write to the Free Software
		23	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
		24
		25	*/
		26
		27	/* SHARK version by Giacomo Guidi <giacomo@gandalf.sssup.it> */
		28
		29	#define __NO_VERSION__ 1
		30
		31	#include <unistd.h>
		32	#include <linux/pci.h>
		33
		34	#include "drivers/bttv.h"
		35	#include "drivers/tuner.h"
		36
		37	/* fwd decl */
		38	static void boot_msp34xx(struct bttv *btv, int pin);
		39	static void hauppauge_eeprom(struct bttv *btv);
		40	static void osprey_eeprom(struct bttv *btv);
		41	static void avermedia_eeprom(struct bttv *btv);
		42	static void init_PXC200(struct bttv *btv);
		43	#if 0
		44	static void init_tea5757(struct bttv *btv);
		45	#endif
		46
		47	static void winview_audio(struct bttv btv, struct video_audio v, int set);
		48	static void lt9415_audio(struct bttv btv, struct video_audio v, int set);
		49	static void avermedia_tvphone_audio(struct bttv btv, struct video_audio v,
		50	int set);
		51	static void terratv_audio(struct bttv btv, struct video_audio v, int set);
		52	static void gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set);
		53	static void winfast2000_audio(struct bttv btv, struct video_audio v, int set);
		54	static void pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set);
		55	static void fv2000s_audio(struct bttv btv, struct video_audio v, int set);
		56	static void windvr_audio(struct bttv btv, struct video_audio v, int set);
		57	static void rv605_muxsel(struct bttv *btv, unsigned int input);
		58
		59	/* config variables */
		60	static int triton1=0;
		61	static int vsfx=0;
		62	int no_overlay=-1;
		63	static unsigned int card[4] = { -1, -1, -1, -1 };
		64	static unsigned int pll[4] = { -1, -1, -1, -1 };
		65	static unsigned int tuner[4] = { -1, -1, -1, -1 };
		66	static unsigned int gpiomask = -1;
		67	static unsigned int audioall = -1;
		68	static unsigned int audiomux[5] = { -1, -1, -1, -1, -1 };
		69
		70	/* ----------------------------------------------------------------------- */
		71	/* list of card IDs for bt878+ cards */
		72
		73	static struct CARD {
		74	unsigned id;
		75	int cardnr;
		76	char *name;
		77	} cards[] = {
		78	{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
		79	{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
		80	{ 0x45000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV/PVR" },
		81	{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
		82	{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
		83	{ 0xff020070, BTTV_OSPREY5x0, "Osprey-500" },
		84	{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
		85
		86	{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
		87	{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
		88
		89	{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		90	{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, P/N 6000704" },
		91	{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
		92	{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
		93
		94	{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV" },
		95	{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
		96	{ 0x001c11bd, BTTV_PINNACLE, "Pinnacle PCTV Sat" },
		97
		98	{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
		99
		100	{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
		101	{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
		102	{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
		103
		104	{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		105	{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
		106	{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		107	{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
		108
		109	{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
		110	{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
		111
		112	{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue" },
		113	{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue" },
		114	{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue" },
		115	{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue" },
		116	{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
		117	{ 0x1127153b, BTTV_TERRATV, "Terratec TV+" },
		118	// clashes with flyvideo
		119	//{ 0x18521852, BTTV_TERRATV, "Terratec TV+" },
		120	{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue" },
		121	{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" },
		122	{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" },
		123
		124	{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
		125	{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		126	{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		127	{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		128
		129	{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
		130	{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM205 PCTV" },
		131	{ 0x18501851, BTTV_CHRONOS_VS2, "Flyvideo 98 (LR50)/ Chronos Video Shuttle II" },
		132	{ 0x18511851, BTTV_FLYVIDEO98EZ, "Flyvideo 98EZ (LR51)/ CyberMail AV" },
		133	{ 0x18521852, BTTV_TYPHOON_TVIEW, "Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
		134	{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
		135	{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		136	{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
		137	{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
		138	{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
181	giacomo	139	{ 0x0350109e, BTTV_PXC200, "Imagenation PXC200" },
170	giacomo	140
		141	{ 0, -1, NULL }
		142	};
		143
		144	/* ----------------------------------------------------------------------- */
		145	/* array with description for bt848 / bt878 tv/grabber cards */
		146
		147	struct tvcard bttv_tvcards[] = {
		148	{
		149	/* ---- card 0x00 ---------------------------------- */
		150	name: " * UNKNOWN/GENERIC * ",
		151	video_inputs: 4,
		152	audio_inputs: 1,
		153	tuner: 0,
		154	svhs: 2,
		155	muxsel: { 2, 3, 1, 0},
		156	tuner_type: -1,
		157	},{
		158	name: "MIRO PCTV",
		159	video_inputs: 4,
		160	audio_inputs: 1,
		161	tuner: 0,
		162	svhs: 2,
		163	gpiomask: 15,
		164	muxsel: { 2, 3, 1, 1},
		165	audiomux: { 2, 0, 0, 0, 10},
		166	needs_tvaudio: 1,
		167	tuner_type: -1,
		168	},{
		169	name: "Hauppauge (bt848)",
		170	video_inputs: 4,
		171	audio_inputs: 1,
		172	tuner: 0,
		173	svhs: 2,
		174	gpiomask: 7,
		175	muxsel: { 2, 3, 1, 1},
		176	audiomux: { 0, 1, 2, 3, 4},
		177	needs_tvaudio: 1,
		178	tuner_type: -1,
		179	},{
		180	name: "STB",
		181	video_inputs: 3,
		182	audio_inputs: 1,
		183	tuner: 0,
		184	svhs: 2,
		185	gpiomask: 7,
		186	muxsel: { 2, 3, 1, 1},
		187	audiomux: { 4, 0, 2, 3, 1},
		188	no_msp34xx: 1,
		189	needs_tvaudio: 1,
		190	tuner_type: -1,
		191	},{
		192
		193	/* ---- card 0x04 ---------------------------------- */
		194	name: "Intel",
		195	video_inputs: 3,
		196	audio_inputs: 1,
		197	tuner: 0,
		198	svhs: -1,
		199	gpiomask: 7,
		200	muxsel: { 2, 3, 1, 1},
		201	audiomux: { 0, 1, 2, 3, 4},
		202	needs_tvaudio: 1,
		203	tuner_type: -1,
		204	},{
		205	name: "Diamond DTV2000",
		206	video_inputs: 4,
		207	audio_inputs: 1,
		208	tuner: 0,
		209	svhs: 2,
		210	gpiomask: 3,
		211	muxsel: { 2, 3, 1, 0},
		212	audiomux: { 0, 1, 0, 1, 3},
		213	needs_tvaudio: 1,
		214	tuner_type: -1,
		215	},{
		216	name: "AVerMedia TVPhone",
		217	video_inputs: 3,
		218	audio_inputs: 1,
		219	tuner: 0,
		220	svhs: 3,
		221	muxsel: { 2, 3, 1, 1},
		222	gpiomask: 0x0f,
		223	audiomux: { 0x0c, 0x04, 0x08, 0x04, 0},
		224	/* 0x04 for some cards ?? */
		225	needs_tvaudio: 1,
		226	tuner_type: -1,
		227	audio_hook: avermedia_tvphone_audio,
		228	},{
		229	name: "MATRIX-Vision MV-Delta",
		230	video_inputs: 5,
		231	audio_inputs: 1,
		232	tuner: -1,
		233	svhs: 3,
		234	gpiomask: 0,
		235	muxsel: { 2, 3, 1, 0, 0},
		236	audiomux: {0 },
		237	needs_tvaudio: 1,
		238	tuner_type: -1,
		239	},{
		240
		241	/* ---- card 0x08 ---------------------------------- */
		242	name: "FlyVideo II (Bt848) LR26",
		243	video_inputs: 4,
		244	audio_inputs: 1,
		245	tuner: 0,
		246	svhs: 2,
		247	gpiomask: 0xc00,
		248	muxsel: { 2, 3, 1, 1},
		249	audiomux: { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
		250	needs_tvaudio: 1,
		251	pll: PLL_28,
		252	tuner_type: -1,
		253	},{
		254	name: "IXMicro TurboTV",
		255	video_inputs: 3,
		256	audio_inputs: 1,
		257	tuner: 0,
		258	svhs: 2,
		259	gpiomask: 3,
		260	muxsel: { 2, 3, 1, 1},
		261	audiomux: { 1, 1, 2, 3, 0},
		262	needs_tvaudio: 1,
		263	tuner_type: -1,
		264	},{
		265	name: "Hauppauge (bt878)",
		266	video_inputs: 4,
		267	audio_inputs: 1,
		268	tuner: 0,
		269	svhs: 2,
		270	gpiomask: 0x0f, /* old: 7 */
		271	muxsel: { 2, 0, 1, 1},
		272	audiomux: { 0, 1, 2, 3, 4},
		273	needs_tvaudio: 1,
		274	pll: PLL_28,
		275	tuner_type: -1,
		276	},{
		277	name: "MIRO PCTV pro",
		278	video_inputs: 3,
		279	audio_inputs: 1,
		280	tuner: 0,
		281	svhs: 2,
		282	gpiomask: 0x3014f,
		283	muxsel: { 2, 3, 1, 1},
		284	audiomux: { 0x20001,0x10001, 0, 0,10},
		285	needs_tvaudio: 1,
		286	tuner_type: -1,
		287	},{
		288
		289	/* ---- card 0x0c ---------------------------------- */
		290	name: "ADS Technologies Channel Surfer TV",
		291	video_inputs: 3,
		292	audio_inputs: 1,
		293	tuner: 0,
		294	svhs: 2,
		295	gpiomask: 15,
		296	muxsel: { 2, 3, 1, 1},
		297	audiomux: { 13, 14, 11, 7, 0, 0},
		298	needs_tvaudio: 1,
		299	tuner_type: -1,
		300	},{
		301	name: "AVerMedia TVCapture 98",
		302	video_inputs: 3,
		303	audio_inputs: 4,
		304	tuner: 0,
		305	svhs: 2,
		306	gpiomask: 15,
		307	muxsel: { 2, 3, 1, 1},
		308	audiomux: { 13, 14, 11, 7, 0, 0},
		309	needs_tvaudio: 1,
		310	pll: PLL_28,
		311	tuner_type: -1,
		312	},{
		313	name: "Aimslab Video Highway Xtreme (VHX)",
		314	video_inputs: 3,
		315	audio_inputs: 1,
		316	tuner: 0,
		317	svhs: 2,
		318	gpiomask: 7,
		319	muxsel: { 2, 3, 1, 1},
		320	audiomux: { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
		321	needs_tvaudio: 1,
		322	tuner_type: -1,
		323	},{
		324	name: "Zoltrix TV-Max",
		325	video_inputs: 3,
		326	audio_inputs: 1,
		327	tuner: 0,
		328	svhs: 2,
		329	gpiomask: 15,
		330	muxsel: { 2, 3, 1, 1},
		331	audiomux: {0 , 0, 1 , 0, 10},
		332	needs_tvaudio: 1,
		333	tuner_type: -1,
		334	},{
		335
		336	/* ---- card 0x10 ---------------------------------- */
		337	name: "Pixelview PlayTV (bt878)",
		338	video_inputs: 3,
		339	audio_inputs: 1,
		340	tuner: 0,
		341	svhs: 2,
		342	gpiomask: 0x01fe00,
		343	muxsel: { 2, 3, 1, 1},
		344	audiomux: { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
		345	needs_tvaudio: 1,
		346	pll: PLL_28,
		347	tuner_type: -1,
		348	},{
		349	name: "Leadtek WinView 601",
		350	video_inputs: 3,
		351	audio_inputs: 1,
		352	tuner: 0,
		353	svhs: 2,
		354	gpiomask: 0x8300f8,
		355	muxsel: { 2, 3, 1, 1,0},
		356	audiomux: { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
		357	needs_tvaudio: 1,
		358	tuner_type: -1,
		359	audio_hook: winview_audio,
		360	has_radio: 1,
		361	},{
		362	name: "AVEC Intercapture",
		363	video_inputs: 3,
		364	audio_inputs: 2,
		365	tuner: 0,
		366	svhs: 2,
		367	gpiomask: 0,
		368	muxsel: {2, 3, 1, 1},
		369	audiomux: {1, 0, 0, 0, 0},
		370	needs_tvaudio: 1,
		371	tuner_type: -1,
		372	},{
		373	name: "LifeView FlyKit w/o Tuner",
		374	video_inputs: 3,
		375	audio_inputs: 1,
		376	tuner: -1,
		377	svhs: -1,
		378	gpiomask: 0x8dff00,
		379	muxsel: { 2, 3, 1, 1},
		380	audiomux: { 0 },
		381	no_msp34xx: 1,
		382	tuner_type: -1,
		383	},{
		384
		385	/* ---- card 0x14 ---------------------------------- */
		386	name: "CEI Raffles Card",
		387	video_inputs: 3,
		388	audio_inputs: 3,
		389	tuner: 0,
		390	svhs: 2,
		391	muxsel: {2, 3, 1, 1},
		392	tuner_type: -1,
		393	},{
		394	name: "Lucky Star Image World ConferenceTV",
		395	video_inputs: 3,
		396	audio_inputs: 1,
		397	tuner: 0,
		398	svhs: 2,
		399	gpiomask: 0x00fffe07,
		400	muxsel: { 2, 3, 1, 1},
		401	audiomux: { 131072, 1, 1638400, 3, 4},
		402	needs_tvaudio: 1,
		403	pll: PLL_28,
		404	tuner_type: TUNER_PHILIPS_PAL_I,
		405	},{
		406	name: "Phoebe Tv Master + FM (CPH050)",
		407	video_inputs: 3,
		408	audio_inputs: 1,
		409	tuner: 0,
		410	svhs: 2,
		411	gpiomask: 0xc00,
		412	muxsel: { 2, 3, 1, 1},
		413	audiomux: {0, 1, 0x800, 0x400, 0xc00, 0},
		414	needs_tvaudio: 1,
		415	tuner_type: -1,
		416	},{
		417	name: "Modular Technology MM205 PCTV, bt878",
		418	video_inputs: 2,
		419	audio_inputs: 1,
		420	tuner: 0,
		421	svhs: -1,
		422	gpiomask: 7,
		423	muxsel: { 2, 3 },
		424	audiomux: { 0, 0, 0, 0, 0 },
		425	no_msp34xx: 1,
		426	pll: PLL_28,
		427	tuner_type: TUNER_ALPS_TSBB5_PAL_I,
		428	},{
		429
		430	/* ---- card 0x18 ---------------------------------- */
		431	name: "[many vendors] CPH05X/06X (bt878)",
		432	video_inputs: 3,
		433	audio_inputs: 1,
		434	tuner: 0,
		435	svhs: 2,
		436	gpiomask: 0xe00,
		437	muxsel: { 2, 3, 1, 1},
		438	audiomux: {0x400, 0x400, 0x400, 0x400, 0xc00},
		439	needs_tvaudio: 1,
		440	pll: PLL_28,
		441	tuner_type: -1,
		442	},{
		443	name: "Terratec/Vobis TV-Boostar",
		444	video_inputs: 3,
		445	audio_inputs: 1,
		446	tuner: 0,
		447	svhs: 2,
		448	gpiomask: 16777215,
		449	muxsel: { 2, 3, 1, 1},
		450	audiomux: { 131072, 1, 1638400, 3,4},
		451	needs_tvaudio: 1,
		452	tuner_type: -1,
		453	},{
		454	name: "Newer Hauppauge WinCam (bt878)",
		455	video_inputs: 4,
		456	audio_inputs: 1,
		457	tuner: 0,
		458	svhs: 3,
		459	gpiomask: 7,
		460	muxsel: { 2, 0, 1, 1},
		461	audiomux: { 0, 1, 2, 3, 4},
		462	needs_tvaudio: 1,
		463	tuner_type: -1,
		464	},{
		465	name: "MAXI TV Video PCI2",
		466	video_inputs: 3,
		467	audio_inputs: 1,
		468	tuner: 0,
		469	svhs: 2,
		470	gpiomask: 0xffff,
		471	muxsel: { 2, 3, 1, 1},
		472	audiomux: { 0, 1, 2, 3, 0xc00},
		473	needs_tvaudio: 1,
		474	tuner_type: TUNER_PHILIPS_SECAM,
		475	},{
		476
		477	/* ---- card 0x1c ---------------------------------- */
		478	name: "Terratec TerraTV+",
		479	video_inputs: 3,
		480	audio_inputs: 1,
		481	tuner: 0,
		482	svhs: 2,
		483	gpiomask: 0x70000,
		484	muxsel: { 2, 3, 1, 1},
		485	audiomux: { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
		486	needs_tvaudio: 1,
		487	tuner_type: TUNER_PHILIPS_PAL,
		488	audio_hook: terratv_audio,
		489	},{
		490	/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
		491	name: "Imagenation PXC200",
		492	video_inputs: 5,
		493	audio_inputs: 1,
		494	tuner: -1,
		495	svhs: 1, /* was: 4 */
		496	gpiomask: 0,
		497	muxsel: { 2, 3, 1, 0, 0},
		498	audiomux: { 0 },
		499	needs_tvaudio: 1,
		500	tuner_type: -1,
		501	},{
		502	name: "FlyVideo 98",
		503	video_inputs: 3,
		504	audio_inputs: 1,
		505	tuner: 0,
		506	svhs: 2,
		507	gpiomask: 0x1800, //0x8dfe00
		508	muxsel: {2, 3, 1, 1},
		509	audiomux: { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
		510	needs_tvaudio: 1,
		511	tuner_type: -1,
		512	},{
		513	name: "iProTV",
		514	video_inputs: 3,
		515	audio_inputs: 1,
		516	tuner: 0,
		517	svhs: 2,
		518	gpiomask: 1,
		519	muxsel: { 2, 3, 1, 1},
		520	audiomux: { 1, 0, 0, 0, 0 },
		521	tuner_type: -1,
		522	},{
		523
		524	/* ---- card 0x20 ---------------------------------- */
		525	name: "Intel Create and Share PCI",
		526	video_inputs: 4,
		527	audio_inputs: 1,
		528	tuner: -1,
		529	svhs: 2,
		530	gpiomask: 7,
		531	muxsel: { 2, 3, 1, 1},
		532	audiomux: { 4, 4, 4, 4, 4},
		533	needs_tvaudio: 1,
		534	tuner_type: -1,
		535	},{
		536	name: "Terratec TerraTValue",
		537	video_inputs: 3,
		538	audio_inputs: 1,
		539	tuner: 0,
		540	svhs: 2,
		541	gpiomask: 0xffff00,
		542	muxsel: { 2, 3, 1, 1},
		543	audiomux: { 0x500, 0, 0x300, 0x900, 0x900},
		544	needs_tvaudio: 1,
		545	pll: PLL_28,
		546	tuner_type: TUNER_PHILIPS_PAL,
		547	},{
		548	name: "Leadtek WinFast 2000",
		549	video_inputs: 3,
		550	audio_inputs: 1,
		551	tuner: 0,
		552	svhs: 2,
		553	gpiomask: 0xc33000,
		554	muxsel: { 2, 3, 1, 1,0},
		555	audiomux: { 0x422000,0x001000,0x621100,0x620000,0x800000,0x620000},
		556	needs_tvaudio: 0,
		557	pll: PLL_28,
		558	tuner_type: -1,
		559	audio_hook: winfast2000_audio,
		560	},{
		561	name: "Flyvideo 98 (LR50Q) / Chronos Video Shuttle II",
		562	video_inputs: 3,
		563	audio_inputs: 3,
		564	tuner: 0,
		565	svhs: 2,
		566	gpiomask: 0x1800,
		567	muxsel: { 2, 3, 1, 1},
		568	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800},
		569	needs_tvaudio: 1,
		570	pll: PLL_28,
		571	tuner_type: -1,
		572	},{
		573
		574	/* ---- card 0x24 ---------------------------------- */
		575	name: "Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner",
		576	video_inputs: 3,
		577	audio_inputs: 3,
		578	tuner: 0,
		579	svhs: 2,
		580	gpiomask: 0x1800,
		581	muxsel: { 2, 3, 1, 1},
		582	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		583	needs_tvaudio: 1,
		584	pll: PLL_28,
		585	tuner_type: -1,
		586	has_radio: 1,
		587	},{
		588	name: "PixelView PlayTV pro",
		589	video_inputs: 3,
		590	audio_inputs: 1,
		591	tuner: 0,
		592	svhs: 2,
		593	gpiomask: 0xff,
		594	muxsel: { 2, 3, 1, 1 },
		595	audiomux: { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
		596	no_msp34xx: 1,
		597	pll: PLL_28,
		598	tuner_type: -1,
		599	},{
		600	name: "TView99 CPH06X",
		601	video_inputs: 4,
		602	audio_inputs: 1,
		603	tuner: 0,
		604	svhs: 2,
		605	gpiomask: 0x551e00,
		606	muxsel: { 2, 3, 1, 0},
		607	audiomux: { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
		608	needs_tvaudio: 1,
		609	pll: PLL_28,
		610	tuner_type: -1,
		611	},{
		612	name: "Pinnacle PCTV Studio/Rave",
		613	video_inputs: 3,
		614	audio_inputs: 1,
		615	tuner: 0,
		616	svhs: 2,
		617	gpiomask: 0x03000F,
		618	muxsel: { 2, 3, 1, 1},
		619	audiomux: { 2, 0, 0, 0, 1},
		620	needs_tvaudio: 1,
		621	pll: PLL_28,
		622	tuner_type: -1,
		623	},{
		624
		625	/* ---- card 0x28 ---------------------------------- */
		626	name: "STB2",
		627	video_inputs: 3,
		628	audio_inputs: 1,
		629	tuner: 0,
		630	svhs: 2,
		631	gpiomask: 7,
		632	muxsel: { 2, 3, 1, 1},
		633	audiomux: { 4, 0, 2, 3, 1},
		634	no_msp34xx: 1,
		635	needs_tvaudio: 1,
		636	tuner_type: -1,
		637	},{
		638	name: "AVerMedia TVPhone 98",
		639	video_inputs: 3,
		640	audio_inputs: 4,
		641	tuner: 0,
		642	svhs: 2,
		643	gpiomask: 12,
		644	muxsel: { 2, 3, 1, 1},
		645	audiomux: { 13, 4, 11, 7, 0, 0},
		646	needs_tvaudio: 1,
		647	pll: PLL_28,
		648	tuner_type: -1,
		649	has_radio: 1,
		650	},{
		651	name: "ProVideo PV951", /* pic16c54 */
		652	video_inputs: 3,
		653	audio_inputs: 1,
		654	tuner: 0,
		655	svhs: 2,
		656	gpiomask: 0,
		657	muxsel: { 2, 3, 1, 1},
		658	audiomux: { 0, 0, 0, 0, 0},
		659	no_msp34xx: 1,
		660	pll: PLL_28,
		661	tuner_type: 1,
		662	},{
		663	name: "Little OnAir TV",
		664	video_inputs: 3,
		665	audio_inputs: 1,
		666	tuner: 0,
		667	svhs: 2,
		668	gpiomask: 0xe00b,
		669	muxsel: {2, 3, 1, 1},
		670	audiomux: {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
		671	no_msp34xx: 1,
		672	tuner_type: -1,
		673	},{
		674
		675	/* ---- card 0x2c ---------------------------------- */
		676	name: "Sigma TVII-FM",
		677	video_inputs: 2,
		678	audio_inputs: 1,
		679	tuner: 0,
		680	svhs: -1,
		681	gpiomask: 3,
		682	muxsel: {2, 3, 1, 1},
		683	audiomux: {1, 1, 0, 2, 3},
		684	no_msp34xx: 1,
		685	pll: PLL_NONE,
		686	tuner_type: -1,
		687	},{
		688	name: "MATRIX-Vision MV-Delta 2",
		689	video_inputs: 5,
		690	audio_inputs: 1,
		691	tuner: -1,
		692	svhs: 3,
		693	gpiomask: 0,
		694	muxsel: { 2, 3, 1, 0, 0},
		695	audiomux: {0 },
		696	no_msp34xx: 1,
		697	pll: PLL_28,
		698	tuner_type: -1,
		699	},{
		700	name: "Zoltrix Genie TV/FM",
		701	video_inputs: 3,
		702	audio_inputs: 1,
		703	tuner: 0,
		704	svhs: 2,
		705	gpiomask: 0xbcf03f,
		706	muxsel: { 2, 3, 1, 1},
		707	audiomux: { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
		708	no_msp34xx: 1,
		709	pll: PLL_28,
		710	tuner_type: 21,
		711	},{
		712	name: "Terratec TV/Radio+",
		713	video_inputs: 3,
		714	audio_inputs: 1,
		715	tuner: 0,
		716	svhs: 2,
		717	gpiomask: 0x1f0000,
		718	muxsel: { 2, 3, 1, 1},
		719	audiomux: { 0xe2ffff, 0xebffff, 0, 0, 0xe0ffff, 0xe2ffff },
		720	needs_tvaudio: 1,
		721	no_msp34xx: 1,
		722	pll: PLL_35,
		723	tuner_type: 1,
		724	has_radio: 1,
		725	},{
		726
		727	/* ---- card 0x30 ---------------------------------- */
		728	name: "Dynalink Magic TView ",
		729	video_inputs: 3,
		730	audio_inputs: 1,
		731	tuner: 0,
		732	svhs: 2,
		733	gpiomask: 15,
		734	muxsel: { 2, 3, 1, 1},
		735	audiomux: {2,0,0,0,1},
		736	needs_tvaudio: 1,
		737	pll: PLL_28,
		738	tuner_type: -1,
		739	},{
		740	name: "IODATA GV-BCTV3/PCI",
		741	video_inputs: 3,
		742	audio_inputs: 1,
		743	tuner: 0,
		744	svhs: 2,
		745	gpiomask: 0x010f00,
		746	muxsel: {2, 3, 0, 0},
		747	audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
		748	no_msp34xx: 1,
		749	pll: PLL_28,
		750	tuner_type: TUNER_ALPS_TSHC6_NTSC,
		751	audio_hook: gvbctv3pci_audio,
		752	},{
		753	name: "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
		754	video_inputs: 4,
		755	audio_inputs: 1,
		756	tuner: 0,
		757	svhs: 3,
		758	gpiomask: 0xAA0000,
		759	muxsel: { 2,3,1,1 },
		760	audiomux: { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
		761	no_msp34xx: 1,
		762	pll: PLL_28,
		763	tuner_type: TUNER_PHILIPS_PAL_I,
		764	},{
		765	name: "Eagle Wireless Capricorn2 (bt878A)",
		766	video_inputs: 4,
		767	audio_inputs: 1,
		768	tuner: 0,
		769	svhs: 2,
		770	gpiomask: 7,
		771	muxsel: { 2, 0, 1, 1},
		772	audiomux: { 0, 1, 2, 3, 4},
		773	pll: PLL_28,
		774	tuner_type: -1 /* TUNER_ALPS_TMDH2_NTSC */,
		775	},{
		776
		777	/* ---- card 0x34 ---------------------------------- */
		778	/* David H�rdeman <david@2gen.com> */
		779	name: "Pinnacle PCTV Studio Pro",
		780	video_inputs: 3,
		781	audio_inputs: 1,
		782	tuner: 0,
		783	svhs: 2,
		784	gpiomask: 0x03000F,
		785	muxsel: { 2, 3, 1, 1},
		786	audiomux: { 1, 0x10001, 0, 0, 10},
		787	needs_tvaudio: 1,
		788	pll: PLL_28,
		789	tuner_type: -1,
		790	},{
		791	/* Claas Langbehn <claas@bigfoot.com>,
		792	Sven Grothklags <sven@upb.de> */
		793	name: "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
		794	video_inputs: 3,
		795	audio_inputs: 3,
		796	tuner: 0,
		797	svhs: 2,
		798	gpiomask: 0x1c,
		799	muxsel: { 2, 3, 1, 1},
		800	audiomux: { 0, 0, 0x10, 8, 4 },
		801	needs_tvaudio: 1,
		802	pll: PLL_28,
		803	tuner_type: TUNER_PHILIPS_PAL_I,
		804	has_radio: 1,
		805	},{
		806	/* Tim R�stermundt <rosterm@uni-muenster.de>
		807	in de.comp.os.unix.linux.hardware:
		808	options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
		809	audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
		810	options tuner type=5 */
		811	name: "Lifetec LT 9415 TV (LR90 Rev.F)",
		812	video_inputs: 4,
		813	audio_inputs: 1,
		814	tuner: 0,
		815	svhs: 2,
		816	gpiomask: 0x18e0,
		817	muxsel: { 2, 3, 1, 1},
		818	audiomux: { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
		819	/* 0x0000: Tuner normal stereo
		820	0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
		821	0x0880: Tuner A2 stereo */
		822	pll: PLL_28,
		823	tuner_type: TUNER_PHILIPS_PAL,
		824	audio_hook: lt9415_audio,
		825	has_radio: 1,
		826	},{
		827	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		828	old Easy TV BT848 version (model CPH031) */
		829	name: "BESTBUY Easy TV (CPH031)",
		830	video_inputs: 4,
		831	audio_inputs: 1,
		832	tuner: 0,
		833	svhs: 2,
		834	gpiomask: 0xF,
		835	muxsel: { 2, 3, 1, 0},
		836	audiomux: { 2, 0, 0, 0, 10},
		837	needs_tvaudio: 0,
		838	pll: PLL_28,
		839	tuner_type: TUNER_TEMIC_PAL,
		840	},{
		841
		842	/* ---- card 0x38 ---------------------------------- */
		843	/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
		844	name: "FlyVideo '98/FM",
		845	video_inputs: 3,
		846	audio_inputs: 3,
		847	tuner: 0,
		848	svhs: 2,
		849	gpiomask: 0x1800,
		850	muxsel: { 2, 3, 0, 1},
		851	audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		852	needs_tvaudio: 1,
		853	pll: PLL_28,
		854	tuner_type: 5,
		855	},{
		856	/* This is the ultimate cheapo capture card
		857	* just a BT848A on a small PCB!
		858	* Steve Hosgood <steve@equiinet.com> */
		859	name: "GrandTec 'Grand Video Capture' (Bt848)",
		860	video_inputs: 2,
		861	audio_inputs: 0,
		862	tuner: -1,
		863	svhs: 1,
		864	gpiomask: 0,
		865	muxsel: { 3, 1 },
		866	audiomux: { 0 },
		867	needs_tvaudio: 0,
		868	no_msp34xx: 1,
		869	pll: PLL_35,
		870	tuner_type: -1,
		871	},{
		872	/* Daniel Herrington <daniel.herrington@home.com> */
		873	name: "Phoebe TV Master Only (No FM) CPH060",
		874	video_inputs: 3,
		875	audio_inputs: 1,
		876	tuner: 0,
		877	svhs: 2,
		878	gpiomask: 0xe00,
		879	muxsel: { 2, 3, 1, 1},
		880	audiomux: { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
		881	needs_tvaudio: 1,
		882	pll: PLL_NONE,
		883	tuner_type: TUNER_TEMIC_4036FY5_NTSC,
		884	},{
		885	/* Matti Mottus <mottus@physic.ut.ee> */
		886	name: "TV Capturer (CPH03X)",
		887	video_inputs: 4,
		888	audio_inputs: 1,
		889	tuner: 0,
		890	svhs: 2,
		891	gpiomask: 0x03000F,
		892	muxsel: { 2, 3, 1, 0},
		893	audiomux: { 2,0,0,0,1 },
		894	pll: PLL_28,
		895	tuner_type: 0,
		896	},{
		897
		898	/* ---- card 0x3c ---------------------------------- */
		899	/* Philip Blundell <philb@gnu.org> */
		900	name: "Modular Technology MM100PCTV",
		901	video_inputs: 2,
		902	audio_inputs: 2,
		903	tuner: 0,
		904	svhs: -1,
		905	gpiomask: 11,
		906	muxsel: { 2, 3, 1, 1},
		907	audiomux: { 2, 0, 0, 1, 8},
		908	pll: PLL_35,
		909	tuner_type: TUNER_TEMIC_PAL,
		910
		911	},{
		912	/* Adrian Cox <adrian@humboldt.co.uk */
		913	name: "AG Electronics GMV1",
		914	video_inputs: 2,
		915	audio_inputs: 0,
		916	tuner: -1,
		917	svhs: 1,
		918	gpiomask: 0xF,
		919	muxsel: { 2, 2},
		920	audiomux: { },
		921	no_msp34xx: 1,
		922	needs_tvaudio: 0,
		923	pll: PLL_28,
		924	tuner_type: -1,
		925	},{
		926	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		927	new Easy TV BT878 version (model CPH061)
		928	special thanks to Informatica Mieres for providing the card */
		929	name: "BESTBUY Easy TV (bt878)",
		930	video_inputs: 3,
		931	audio_inputs: 2,
		932	tuner: 0,
		933	svhs: 2,
		934	gpiomask: 0xFF,
		935	muxsel: { 2, 3, 1, 0},
		936	audiomux: { 1, 0, 4, 4, 9},
		937	needs_tvaudio: 0,
		938	pll: PLL_28,
		939	tuner_type: TUNER_PHILIPS_PAL,
		940	},{
		941	/* Lukas Gebauer <geby@volny.cz> */
		942	name: "ATI TV-Wonder",
		943	video_inputs: 3,
		944	audio_inputs: 1,
		945	tuner: 0,
		946	svhs: 2,
		947	gpiomask: 0xf03f,
		948	muxsel: { 2, 3, 1, 0 },
		949	audiomux: { 0xbffe, 0, 0xbfff, 0, 0xbffe},
		950	pll: PLL_28,
		951	tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
		952	},{
		953
		954	/* ---- card 0x40 ---------------------------------- */
		955	/* Lukas Gebauer <geby@volny.cz> */
		956	name: "ATI TV-Wonder VE",
		957	video_inputs: 2,
		958	audio_inputs: 1,
		959	tuner: 0,
		960	svhs: -1,
		961	gpiomask: 1,
		962	muxsel: { 2, 3, 0, 1},
		963	audiomux: { 0, 0, 1, 0, 0},
		964	no_msp34xx: 1,
		965	pll: PLL_28,
		966	tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
		967	},{
		968	/* DeeJay <deejay@westel900.net (2000S) */
		969	name: "FlyVideo 2000S",
		970	video_inputs: 3,
		971	audio_inputs: 3,
		972	tuner: 0,
		973	svhs: 2,
		974	gpiomask: 0x18e0,
		975	muxsel: { 2, 3, 0, 1},
		976	/* Radio changed from 1e80 to 0x800 to make
		977	Flyvideo2000S in .hu happy (gm)*/
		978	/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
		979	audiomux: { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
		980	audio_hook: fv2000s_audio,
		981	no_msp34xx: 1,
		982	no_tda9875: 1,
		983	needs_tvaudio: 1,
		984	pll: PLL_28,
		985	tuner_type: 5,
		986	},{
		987	name: "Terratec TValueRadio",
		988	video_inputs: 3,
		989	audio_inputs: 1,
		990	tuner: 0,
		991	svhs: 2,
		992	gpiomask: 0xffff00,
		993	muxsel: { 2, 3, 1, 1},
		994	audiomux: { 0x500, 0x500, 0x300, 0x900, 0x900},
		995	needs_tvaudio: 1,
		996	pll: PLL_28,
		997	tuner_type: TUNER_PHILIPS_PAL,
		998	has_radio: 1,
		999	},{
		1000	/* TANAKA Kei <peg00625@nifty.com> */
		1001	name: "IODATA GV-BCTV4/PCI",
		1002	video_inputs: 3,
		1003	audio_inputs: 1,
		1004	tuner: 0,
		1005	svhs: 2,
		1006	gpiomask: 0x010f00,
		1007	muxsel: {2, 3, 0, 0},
		1008	audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
		1009	no_msp34xx: 1,
		1010	pll: PLL_28,
		1011	tuner_type: TUNER_SHARP_2U5JF5540_NTSC,
		1012	audio_hook: gvbctv3pci_audio,
		1013	},{
		1014
		1015	/* ---- card 0x44 ---------------------------------- */
		1016	name: "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
		1017	// try "insmod msp3400 simple=0" if you have
		1018	// sound problems with this card.
		1019	video_inputs: 4,
		1020	audio_inputs: 1,
		1021	tuner: 0,
		1022	svhs: -1,
		1023	gpiomask: 0x4f8a00,
		1024	// 0x100000: 1=MSP enabled (0=disable again)
		1025	// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
		1026	audiomux: {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
		1027	// tvtuner, radio, external,internal, mute, stereo
		1028	/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
		1029	muxsel: { 2, 3 ,0 ,1},
		1030	tuner_type: TUNER_MT2032,
		1031	pll: PLL_28,
		1032	has_radio: 1,
		1033	},{
		1034	/* Philip Blundell <pb@nexus.co.uk> */
		1035	name: "Active Imaging AIMMS",
		1036	video_inputs: 1,
		1037	audio_inputs: 0,
		1038	tuner: -1,
		1039	tuner_type: -1,
		1040	pll: PLL_28,
		1041	muxsel: { 2 },
		1042	gpiomask: 0
		1043	},{
		1044	/* Tomasz Pyra <hellfire@sedez.iq.pl> */
		1045	name: "Pixelview PV-BT878P+ (Rev.4C)",
		1046	video_inputs: 3,
		1047	audio_inputs: 4,
		1048	tuner: 0,
		1049	svhs: 2,
		1050	gpiomask: 15,
		1051	muxsel: { 2, 3, 1, 1},
		1052	audiomux: { 0, 0, 11, 7, 13, 0},
		1053	needs_tvaudio: 1,
		1054	pll: PLL_28,
		1055	tuner_type: 25,
		1056	},{
		1057	name: "Flyvideo 98EZ (capture only)",
		1058	video_inputs: 4,
		1059	audio_inputs: 0,
		1060	tuner: -1,
		1061	svhs: 2,
		1062	muxsel: { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
		1063	pll: PLL_28,
		1064	no_msp34xx: 1,
		1065	},{
		1066
		1067	/* ---- card 0x48 ---------------------------------- */
		1068	/* Dariusz Kowalewski <darekk@automex.pl> */
		1069	name: "Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
		1070	video_inputs: 3,
		1071	audio_inputs: 1,
		1072	tuner: 0,
		1073	svhs: 2,
		1074	gpiomask: 0x3f,
		1075	muxsel: { 2, 3, 0, 1 },
		1076	audiomux: { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
		1077	needs_tvaudio: 1,
		1078	no_msp34xx: 1,
		1079	no_tda9875: 1,
		1080	pll: PLL_28,
		1081	tuner_type: -1,
		1082	audio_hook: pvbt878p9b_audio,
		1083	has_radio: 1,
		1084	},{
		1085	/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
		1086	/* you must jumper JP5 for the card to work */
		1087	name: "Sensoray 311",
		1088	video_inputs: 5,
		1089	audio_inputs: 0,
		1090	tuner: -1,
		1091	svhs: 4,
		1092	gpiomask: 0,
		1093	muxsel: { 2, 3, 1, 0, 0},
		1094	audiomux: { 0 },
		1095	needs_tvaudio: 0,
		1096	tuner_type: -1,
		1097	},{
		1098	/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
		1099	name: "RemoteVision MX (RV605)",
		1100	video_inputs: 16,
		1101	audio_inputs: 0,
		1102	tuner: -1,
		1103	svhs: -1,
		1104	gpiomask: 0x00,
		1105	gpiomask2: 0x07ff,
		1106	muxsel: { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
		1107	0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
		1108	no_msp34xx: 1,
		1109	no_tda9875: 1,
		1110	tuner_type: -1,
		1111	muxsel_hook: rv605_muxsel,
		1112	},{
		1113	name: "Powercolor MTV878/ MTV878R/ MTV878F",
		1114	video_inputs: 3,
		1115	audio_inputs: 2,
		1116	tuner: 0,
		1117	svhs: 2,
		1118	gpiomask: 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
		1119	muxsel: { 2, 1, 1, },
		1120	audiomux: { 0, 1, 2, 2, 4 },
		1121	needs_tvaudio: 0,
		1122	tuner_type: TUNER_PHILIPS_PAL,
		1123	pll: PLL_28,
		1124	has_radio: 1,
		1125	},{
		1126
		1127	/* ---- card 0x4c ---------------------------------- */
		1128	/* Masaki Suzuki <masaki@btree.org> */
		1129	name: "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
		1130	video_inputs: 3,
		1131	audio_inputs: 1,
		1132	tuner: 0,
		1133	svhs: 2,
		1134	gpiomask: 0x140007,
		1135	muxsel: { 2, 3, 1, 1 },
		1136	audiomux: { 0, 1, 2, 3, 4, 0 },
		1137	tuner_type: TUNER_PHILIPS_NTSC,
		1138	audio_hook: windvr_audio,
		1139	},{
		1140	name: "GrandTec Multi Capture Card (Bt878)",
		1141	video_inputs: 4,
		1142	audio_inputs: 0,
		1143	tuner: -1,
		1144	svhs: -1,
		1145	gpiomask: 0,
		1146	muxsel: { 2, 3, 1, 0 },
		1147	audiomux: { 0 },
		1148	needs_tvaudio: 0,
		1149	no_msp34xx: 1,
		1150	pll: PLL_28,
		1151	tuner_type: -1,
		1152	},{
		1153	/* http://www.aopen.com/products/video/va1000.htm */
		1154	name: "AOPEN VA1000",
		1155	video_inputs: 3, /* coax, AV, s-vid */
		1156	audio_inputs: 1,
		1157	tuner: 0,
		1158	tuner_type: TUNER_LG_PAL, /* actually TP18PSB12P (PAL B/G) */
		1159	audiomux: { 2, 0, 0, 0 },
		1160	muxsel: { 2, 3, 1, 0 },
		1161	pll: PLL_28,
		1162	},{
		1163	name: "Osprey 100/150 (878)", /* 0x1(2\|3)-45C6-C1 */
		1164	video_inputs: 4, /* id-inputs-clock */
		1165	audio_inputs: 0,
		1166	tuner: -1,
		1167	svhs: 3,
		1168	muxsel: { 3, 2, 0, 1 },
		1169	pll: PLL_28,
		1170	tuner_type: -1,
		1171	no_msp34xx: 1,
		1172	no_tda9875: 1,
		1173	no_tda7432: 1,
		1174	},{
		1175	/* ---- card 0x50 ---------------------------------- */
		1176	name: "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
		1177	video_inputs: 3,
		1178	audio_inputs: 0,
		1179	tuner: -1,
		1180	svhs: 2,
		1181	muxsel: { 2, 3, 1 },
		1182	pll: PLL_28,
		1183	tuner_type: -1,
		1184	no_msp34xx: 1,
		1185	no_tda9875: 1,
		1186	no_tda7432: 1,
		1187	},{
		1188	name: "Osprey 101 (848)", /* 0x05-40C0-C1 */
		1189	video_inputs: 2,
		1190	audio_inputs: 0,
		1191	tuner: -1,
		1192	svhs: 1,
		1193	muxsel: { 3, 1 },
		1194	pll: PLL_28,
		1195	tuner_type: -1,
		1196	no_msp34xx: 1,
		1197	no_tda9875: 1,
		1198	no_tda7432: 1,
		1199	},{
		1200	name: "Osprey 101/151", /* 0x1(4\|5)-0004-C4 */
		1201	video_inputs: 1,
		1202	audio_inputs: 0,
		1203	tuner: -1,
		1204	svhs: -1,
		1205	muxsel: { 0 },
		1206	pll: PLL_28,
		1207	tuner_type: -1,
		1208	no_msp34xx: 1,
		1209	no_tda9875: 1,
		1210	no_tda7432: 1,
		1211	},{
		1212	name: "Osprey 101/151 w/ svid", /* 0x(16\|17\|20)-00C4-C1 */
		1213	video_inputs: 2,
		1214	audio_inputs: 0,
		1215	tuner: -1,
		1216	svhs: 1,
		1217	muxsel: { 0, 1 },
		1218	pll: PLL_28,
		1219	tuner_type: -1,
		1220	no_msp34xx: 1,
		1221	no_tda9875: 1,
		1222	no_tda7432: 1,
		1223	},{
		1224	/* ---- card 0x54 ---------------------------------- */
		1225	name: "Osprey 200/201/250/251", /* 0x1(8\|9\|E\|F)-0004-C4 */
		1226	video_inputs: 1,
		1227	audio_inputs: 1,
		1228	tuner: -1,
		1229	svhs: -1,
		1230	muxsel: { 0 },
		1231	pll: PLL_28,
		1232	tuner_type: -1,
		1233	no_msp34xx: 1,
		1234	no_tda9875: 1,
		1235	no_tda7432: 1,
		1236	},{
		1237	name: "Osprey 200/250", /* 0x1(A\|B)-00C4-C1 */
		1238	video_inputs: 2,
		1239	audio_inputs: 1,
		1240	tuner: -1,
		1241	svhs: 1,
		1242	muxsel: { 0, 1 },
		1243	pll: PLL_28,
		1244	tuner_type: -1,
		1245	no_msp34xx: 1,
		1246	no_tda9875: 1,
		1247	no_tda7432: 1,
		1248	},{
		1249	name: "Osprey 210/220", /* 0x1(A\|B)-04C0-C1 */
		1250	video_inputs: 2,
		1251	audio_inputs: 1,
		1252	tuner: -1,
		1253	svhs: 1,
		1254	muxsel: { 2, 3 },
		1255	pll: PLL_28,
		1256	tuner_type: -1,
		1257	no_msp34xx: 1,
		1258	no_tda9875: 1,
		1259	no_tda7432: 1,
		1260	},{
		1261	name: "Osprey 5x0", /* 500 and 540 */
		1262	video_inputs: 2,
		1263	audio_inputs: 1,
		1264	tuner: -1,
		1265	svhs: 1,
		1266	muxsel: { 0, 1 },
		1267	pll: PLL_28,
		1268	tuner_type: -1,
		1269	no_msp34xx: 1,
		1270	no_tda9875: 1,
		1271	no_tda7432: 1,
		1272	},{
		1273	/* ---- card 0x58 ---------------------------------- */
		1274	name: "Osprey 2000", /* 2000 */
		1275	video_inputs: 2,
		1276	audio_inputs: 1,
		1277	tuner: -1,
		1278	svhs: 1,
		1279	muxsel: { 2, 3 },
		1280	pll: PLL_28,
		1281	tuner_type: -1,
		1282	no_msp34xx: 1,
		1283	no_tda9875: 1,
		1284	no_tda7432: 1, /* must avoid, conflicts with the bt860 */
		1285	}};
		1286
		1287	const int bttv_num_tvcards = (sizeof(bttv_tvcards)/sizeof(struct tvcard));
		1288
		1289	/* ----------------------------------------------------------------------- */
		1290
		1291	static unsigned char eeprom_data[256];
		1292
		1293	/*
		1294	* identify card
		1295	*/
		1296	void bttv_idcard(struct bttv *btv)
		1297	{
		1298	unsigned int gpiobits;
		1299	int i,type;
		1300	unsigned short tmp;
		1301
		1302	/* read PCI subsystem ID */
		1303	pci_read_config_word(btv->dev, 2, &tmp);
		1304	btv->cardid = tmp << 16;
		1305	pci_read_config_word(btv->dev, 0, &tmp);
		1306	btv->cardid \|= tmp;
		1307
		1308	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
		1309	/* look for the card */
		1310	for (type = -1, i = 0; cards[i].id != 0; i++)
		1311	if (cards[i].id == btv->cardid)
		1312	type = i;
		1313
		1314	if (type != -1) {
		1315	/* found it */
		1316	printk(KERN_INFO "bttv%d: %s [card=%d], "
		1317	"PCI ID is %04x:%04x\n",
		1318	btv->nr,cards[type].name,cards[type].cardnr,
		1319	btv->cardid & 0xffff, btv->cardid >> 16);
		1320	btv->type = cards[type].cardnr;
		1321	} else {
		1322	/* 404 */
		1323	printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
		1324	btv->nr, btv->cardid&0xffff, btv->cardid>>16);
		1325	}
		1326	}
		1327
		1328	/* let the user override the autodetected type */
		1329	if (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards)
		1330	btv->type=card[btv->nr];
		1331
		1332	/* print which card config we are using */
		1333	sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
		1334	btv->id,
		1335	(btv->id==848 && btv->revision==0x12) ? "A" : "",
		1336	bttv_tvcards[btv->type].name);
		1337	printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
		1338	btv->video_dev.name,btv->type,
		1339	(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
		1340	"insmod option" : "autodetected");
		1341
		1342	/* overwrite gpio stuff ?? */
		1343	if (-1 == audioall && -1 == audiomux[0])
		1344	return;
		1345
		1346	if (-1 != audiomux[0]) {
		1347	gpiobits = 0;
		1348	for (i = 0; i < 5; i++) {
		1349	bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
		1350	gpiobits \|= audiomux[i];
		1351	}
		1352	} else {
		1353	gpiobits = audioall;
		1354	for (i = 0; i < 5; i++) {
		1355	bttv_tvcards[btv->type].audiomux[i] = audioall;
		1356	}
		1357	}
		1358	bttv_tvcards[btv->type].gpiomask = (-1 != gpiomask) ? gpiomask : gpiobits;
		1359	cprintf("[info ] bttv%d: gpio config override: mask=0x%lx, mux=",
		1360	btv->nr,bttv_tvcards[btv->type].gpiomask);
		1361	for (i = 0; i < 5; i++) {
		1362	cprintf("%s0x%lx", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
		1363	}
		1364	cprintf("\n");
		1365	}
		1366
		1367	/*
		1368	* (most) board specific initialisations goes here
		1369	*/
		1370
		1371	static void flyvideo_gpio(struct bttv *btv)
		1372	{
		1373	int gpio,outbits;
		1374	int tuner=-1,ttype;
		1375
		1376	outbits = btread(BT848_GPIO_OUT_EN);
		1377	btwrite(0x00, BT848_GPIO_OUT_EN);
		1378	udelay(8); // without this we would see the 0x1800 mask
		1379	gpio=gpioread();
		1380	btwrite(outbits, BT848_GPIO_OUT_EN);
		1381	// all cards provide GPIO info, some have an additional eeprom
		1382
		1383	// lowest 3 bytes are remote control codes (no handshake needed)
		1384	ttype=(gpio&0x0f0000)>>16;
		1385	switch(ttype) {
		1386	case 0: tuner=4; // None
		1387	break;
		1388	case 4: tuner=5; // Philips PAL
		1389	break;
		1390	case 6: tuner=37; // LG PAL (newer TAPC series)
		1391	break;
		1392	case 0xC: tuner=3; // Philips SECAM(+PAL)
		1393	break;
		1394	default:
		1395	printk(KERN_INFO "bttv%d: flyvideo_gpio: unknown tuner type.\n", btv->nr);
		1396	}
		1397
		1398	printk(KERN_INFO "bttv%d: Flyvideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
		1399	btv->nr,
		1400	gpio&0x400000? "yes":"no",
		1401	gpio&0x800000? "yes":"no", tuner, gpio);
		1402
		1403	btv->tuner_type = tuner;
		1404	btv->has_radio = gpio&0x400000? 1:0;
		1405	}
		1406
		1407	int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
		1408	14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
		1409	int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
		1410	1,1,1,1, 1,1,1,0, 0,0,0,0, 0,0,0,0 };
		1411
		1412	/* initialization part one -- before registering i2c bus */
		1413	void bttv_init_card1(struct bttv *btv)
		1414	{
		1415	if (btv->type == BTTV_HAUPPAUGE \|\| btv->type == BTTV_HAUPPAUGE878)
		1416	boot_msp34xx(btv,5);
		1417	if (btv->type == BTTV_VOODOOTV_FM)
		1418	boot_msp34xx(btv,20);
		1419
		1420	/printk("bttv: end of init -- pre i2c\n");/
		1421	}
		1422
		1423	/* initialization part one -- after registering i2c bus */
		1424	void bttv_init_card2(struct bttv *btv)
		1425	{
		1426	/* miro/pinnacle */
		1427	if (btv->type == BTTV_MIRO \|\|
		1428	btv->type == BTTV_MIROPRO \|\|
		1429	btv->type == BTTV_PINNACLE \|\|
		1430	btv->type == BTTV_PINNACLEPRO) {
		1431	int id,msp;
		1432	id = ((gpioread()>>10) & 31) -1;
		1433	msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
		1434	btv->tuner_type = miro_tunermap[id];
		1435	if (0 == (gpioread() & 0x20)) {
		1436	btv->has_radio = 1;
		1437	if (!miro_fmtuner[id]) {
		1438	btv->has_matchbox = 1;
		1439	btv->mbox_we = (1<<6);
		1440	btv->mbox_most = (1<<7);
		1441	btv->mbox_clk = (1<<8);
		1442	btv->mbox_data = (1<<9);
		1443	btv->mbox_mask = (1<<6)\|(1<<7)\|(1<<8)\|(1<<9);
		1444	}
		1445	} else {
		1446	btv->has_radio = 0;
		1447	}
		1448	if (-1 != msp) {
		1449	if (btv->type == BTTV_MIRO)
		1450	btv->type = BTTV_MIROPRO;
		1451	if (btv->type == BTTV_PINNACLE)
		1452	btv->type = BTTV_PINNACLEPRO;
		1453	}
		1454	if (bttv_verbose)
		1455	printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d "
		1456	"radio=%s stereo=%s\n",
		1457	btv->nr, id+1, btv->tuner_type,
		1458	!btv->has_radio ? "no" :
		1459	(btv->has_matchbox ? "matchbox" : "fmtuner"),
		1460	(-1 == msp) ? "no" : "yes");
		1461	#if 0
		1462	if (btv->has_matchbox) {
		1463	if (bttv_verbose)
		1464	printk(KERN_INFO "Initializing TEA5757...\n");
		1465	init_tea5757(btv);
		1466	}
		1467	#endif
		1468	}
		1469
		1470	if (btv->type == BTTV_FLYVIDEO_98 \|\|
		1471	btv->type == BTTV_FLYVIDEO \|\|
		1472	btv->type == BTTV_TYPHOON_TVIEW \|\|
		1473	btv->type == BTTV_CHRONOS_VS2 \|\|
		1474	btv->type == BTTV_FLYVIDEO_98FM \|\|
		1475	btv->type == BTTV_FLYVIDEO2000 \|\|
		1476	btv->type == BTTV_FLYVIDEO98EZ)
		1477	flyvideo_gpio(btv);
		1478
		1479	if (btv->type == BTTV_HAUPPAUGE \|\| btv->type == BTTV_HAUPPAUGE878) {
		1480	/* pick up some config infos from the eeprom */
		1481	bttv_readee(btv,eeprom_data,0xa0);
		1482	hauppauge_eeprom(btv);
		1483	}
		1484
		1485	if ((btv->type >= BTTV_OSPREY_BEGIN) && (btv->type <= BTTV_OSPREY_END)) {
		1486	/* check for config info in the eeprom */
		1487	bttv_readee(btv,eeprom_data,0xa0);
		1488	osprey_eeprom(btv);
		1489	}
		1490
		1491	if (btv->type == BTTV_AVERMEDIA98 \|\| btv->type == BTTV_AVPHONE98) {
		1492	bttv_readee(btv,eeprom_data,0xa0);
		1493	avermedia_eeprom(btv);
		1494	}
		1495
		1496	if (btv->type == BTTV_PXC200)
		1497	init_PXC200(btv);
		1498
		1499	if (btv->type == BTTV_VHX) {
		1500	btv->has_radio = 1;
		1501	btv->has_matchbox = 1;
		1502	btv->mbox_we = 0x20;
		1503	btv->mbox_most = 0;
		1504	btv->mbox_clk = 0x08;
		1505	btv->mbox_data = 0x10;
		1506	btv->mbox_mask = 0x38;
		1507	}
		1508
		1509	if (btv->type == BTTV_LIFETEC_9415) {
		1510	if (gpioread() & 0x4000)
		1511	cprintf("bttv%d: lifetec: tv mono/fm stereo card\n", btv->nr);
		1512	else
		1513	cprintf("bttv%d: lifetec: stereo(TDA9821) card\n",btv->nr);
		1514	}
		1515
		1516	if (btv->type == BTTV_MAGICTVIEW061) {
		1517	if(btv->cardid == 0x4002144f) {
		1518	btv->has_radio=1;
		1519	cprintf("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
		1520	}
		1521	}
		1522
		1523	/* pll configuration */
		1524	if (!(btv->id==848 && btv->revision==0x11)) {
		1525	/* defaults from card list */
		1526	if (PLL_28 == bttv_tvcards[btv->type].pll) {
		1527	btv->pll.pll_ifreq=28636363;
		1528	btv->pll.pll_crystal=BT848_IFORM_XT0;
		1529	}
		1530	if (PLL_35 == bttv_tvcards[btv->type].pll) {
		1531	btv->pll.pll_ifreq=35468950;
		1532	btv->pll.pll_crystal=BT848_IFORM_XT1;
		1533	}
		1534	/* insmod options can override */
		1535	switch (pll[btv->nr]) {
		1536	case 0: /* none */
		1537	btv->pll.pll_crystal = 0;
		1538	btv->pll.pll_ifreq = 0;
		1539	btv->pll.pll_ofreq = 0;
		1540	break;
		1541	case 1: /* 28 MHz */
		1542	case 28:
		1543	btv->pll.pll_ifreq = 28636363;
		1544	btv->pll.pll_ofreq = 0;
		1545	btv->pll.pll_crystal = BT848_IFORM_XT0;
		1546	break;
		1547	case 2: /* 35 MHz */
		1548	case 35:
		1549	btv->pll.pll_ifreq = 35468950;
		1550	btv->pll.pll_ofreq = 0;
		1551	btv->pll.pll_crystal = BT848_IFORM_XT1;
		1552	break;
		1553	}
		1554	}
		1555
		1556	/* tuner configuration (from card list / insmod option) */
		1557	if (-1 != bttv_tvcards[btv->type].tuner_type)
		1558	btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
		1559	if (-1 != tuner[btv->nr])
		1560	btv->tuner_type = tuner[btv->nr];
		1561
		1562	if (bttv_tvcards[btv->type].has_radio)
		1563	btv->has_radio=1;
		1564
		1565	/* try to detect audio/fader chips */
		1566	if (!bttv_tvcards[btv->type].no_msp34xx &&
		1567	bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
		1568	}
		1569
		1570	if (!bttv_tvcards[btv->type].no_tda9875 &&
		1571	bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
		1572	}
		1573
		1574	if (!bttv_tvcards[btv->type].no_tda7432 &&
		1575	bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
		1576	}
		1577
		1578	if (bttv_tvcards[btv->type].needs_tvaudio) {
		1579	}
		1580
		1581	if (bttv_tvcards[btv->type].tuner != -1) {
		1582	}
		1583	}
		1584
		1585
		1586	/* ----------------------------------------------------------------------- */
		1587	/* some hauppauge specific stuff */
		1588
		1589	static struct HAUPPAUGE_TUNER
		1590	{
		1591	int id;
		1592	char *name;
		1593	}
		1594	hauppauge_tuner[] =
		1595	{
		1596	{ TUNER_ABSENT, "" },
		1597	{ TUNER_ABSENT, "External" },
		1598	{ TUNER_ABSENT, "Unspecified" },
		1599	{ TUNER_PHILIPS_PAL, "Philips FI1216" },
		1600	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
		1601	{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
		1602	{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
		1603	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
		1604	{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
		1605	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
		1606	{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
		1607	{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
		1608	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
		1609	{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
		1610	{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
		1611	{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
		1612	{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
		1613	{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
		1614	{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
		1615	{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
		1616	{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
		1617	{ TUNER_PHILIPS_PAL, "Philips FM1216" },
		1618	{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
		1619	{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
		1620	{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
		1621	{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
		1622	{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
		1623	{ TUNER_ABSENT, "Samsung TCPN9082D" },
		1624	{ TUNER_ABSENT, "Samsung TCPM9092P" },
		1625	{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
		1626	{ TUNER_ABSENT, "Samsung TCPN9085D" },
		1627	{ TUNER_ABSENT, "Samsung TCPB9085P" },
		1628	{ TUNER_ABSENT, "Samsung TCPL9091P" },
		1629	{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
		1630	{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
		1631	{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
		1632	{ TUNER_ABSENT, "Philips TD1536" },
		1633	{ TUNER_ABSENT, "Philips TD1536D" },
		1634	{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
		1635	{ TUNER_ABSENT, "Philips FI1256MP" },
		1636	{ TUNER_ABSENT, "Samsung TCPQ9091P" },
		1637	{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
		1638	{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
		1639	{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
		1640	{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
		1641	{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
		1642	{ TUNER_LG_NTSC_FM, "LG TP18NSR01F"},
		1643	{ TUNER_LG_PAL_FM, "LG TP18PSB01D"},
		1644	{ TUNER_LG_PAL, "LG TP18PSB11D"},
		1645	{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
		1646	{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
		1647	};
		1648
		1649	static void hauppauge_eeprom(struct bttv *btv)
		1650	{
		1651	int blk2,tuner,radio,model;
		1652
		1653	if (eeprom_data[0] != 0x84 \|\| eeprom_data[2] != 0)
		1654	printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
		1655	btv->nr);
		1656
		1657	/* Block 2 starts after len+3 bytes header */
		1658	blk2 = eeprom_data[1] + 3;
		1659
		1660	/* decode + use some config infos */
		1661	model = eeprom_data[12] << 8 \| eeprom_data[11];
		1662	tuner = eeprom_data[9];
		1663	radio = eeprom_data[blk2-1] & 0x01;
		1664
		1665	if (tuner < sizeof(hauppauge_tuner)/sizeof(struct HAUPPAUGE_TUNER))
		1666	btv->tuner_type = hauppauge_tuner[tuner].id;
		1667	if (radio)
		1668	btv->has_radio = 1;
		1669
		1670	if (bttv_verbose)
		1671	printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
		1672	"tuner=%s (%d), radio=%s\n",
		1673	btv->nr, model, hauppauge_tuner[tuner].name,
		1674	btv->tuner_type, radio ? "yes" : "no");
		1675	}
		1676
		1677	static void osprey_eeprom(struct bttv *btv)
		1678	{
		1679	int i = 0;
		1680	int detected_type = btv->type;
		1681	unsigned char *ee = eeprom_data;
		1682	unsigned long serial = 0;
		1683
		1684	if (bttv_debug) {
		1685	printk(KERN_INFO "Osprey: EEPROM dump\n");
		1686	for(;i<256; i+= 16) {
		1687	cprintf("[info ] Osprey 100:(%02X) %02X %02X %02X %02X %02X %02X %02X %02X -- %02X %02X %02X %02X %02X %02X %02X %02X\n",
		1688	i,ee[i+ 0],ee[i+ 1],ee[i+ 2],ee[i+ 3],
		1689	ee[i+ 4],ee[i+ 5],ee[i+ 6],ee[i+ 7],
		1690	ee[i+ 8],ee[i+ 9],ee[i+10],ee[i+11],
		1691	ee[i+12],ee[i+13],ee[i+14],ee[i+15] );
		1692	}
		1693	}
		1694
		1695	if (btv->type == 0) {
		1696	/* this might be an antique...check for MMAC label in eeprom */
		1697	if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
		1698	unsigned char checksum = 0;
		1699	/* that looks like an old card...verify checksum */
		1700	for (i =0; i<21; i++) checksum += ee[i];
		1701	if (checksum == ee[21]) {
		1702	btv->type = BTTV_OSPREY1x0_848;
		1703	for (i = 12; i < 21; i++) serial *= 10,serial += ee[i] - '0';
		1704	}
		1705	}
		1706	} else {
		1707	/* we know this is an osprey card, find a valid eeprom descriptor */
		1708	int offset = 4*16;
		1709
		1710	for(; offset < 8*16; offset += 16) {
		1711	unsigned short checksum = 0;
		1712	/* verify the checksum */
		1713	for(i = 0; i<14; i++) checksum += ee[i+offset];
		1714	checksum = ~checksum; /* no idea why */
		1715	if ((((checksum>>8) & 0x0FF) == ee[offset+14]) &&
		1716	((checksum & 0x0FF) == ee[offset+15])) {
		1717	break;
		1718	}
		1719	}
		1720
		1721	if (offset < 8*16) {
		1722	/* found a valid descriptor */
		1723	unsigned short type = (ee[offset+4]<<8) \| (ee[offset+5]);
		1724
		1725	switch(type) {
		1726	/* 848 based */
		1727	case 0x0004: {
		1728	btv->type = BTTV_OSPREY1x0_848;
		1729	break;
		1730	}
		1731	case 0x0005: {
		1732	btv->type = BTTV_OSPREY101_848;
		1733	break;
		1734	}
		1735	/* 878 based */
		1736	case 0x0012:
		1737	case 0x0013: {
		1738	btv->type = BTTV_OSPREY1x0;
		1739	break;
		1740	}
		1741	case 0x0014:
		1742	case 0x0015: {
		1743	btv->type = BTTV_OSPREY1x1;
		1744	break;
		1745	}
		1746	case 0x0016:
		1747	case 0x0017:
		1748	case 0x0020: {
		1749	btv->type = BTTV_OSPREY1x1_SVID;
		1750	break;
		1751	}
		1752	case 0x0018:
		1753	case 0x0019:
		1754	case 0x001E:
		1755	case 0x001F: {
		1756	btv->type = BTTV_OSPREY2xx;
		1757	break;
		1758	}
		1759	case 0x001A:
		1760	case 0x001B: {
		1761	btv->type = BTTV_OSPREY2x0_SVID;
		1762	break;
		1763	}
		1764	case 0x0060:
		1765	case 0x0070: {
		1766	btv->type = BTTV_OSPREY2x0;
		1767	//enable output on select control lines
		1768	btwrite(0x000303, BT848_GPIO_OUT_EN);
		1769	break;
		1770	}
		1771	default: {
		1772	/* unknown...leave as generic, but get a serial # */
		1773	break;
		1774	}
		1775	}
		1776
		1777	serial = (ee[offset+6] << 24)
		1778	\| (ee[offset+7] << 16)
		1779	\| (ee[offset+8] << 8)
		1780	\| (ee[offset+9]);
		1781	}
		1782	}
		1783
		1784	if ((btv->type != detected_type) \|\| (serial != 0)){
		1785	/* reprint which card config we are using */
		1786	sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
		1787	btv->id,
		1788	(btv->id==848 && btv->revision==0x12) ? "A" : "",
		1789	bttv_tvcards[btv->type].name);
		1790	printk(KERN_INFO "bttv%d: is now:%s [card=%d,%s] Serial#: %ld\n",
		1791	btv->nr,
		1792	btv->video_dev.name,
		1793	btv->type,
		1794	(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
		1795	"insmod option" : "autodetected",
		1796	serial);
		1797	}
		1798	}
		1799
		1800
		1801	/* ----------------------------------------------------------------------- */
		1802	/* AVermedia specific stuff, from bktr_card.c */
		1803
		1804	int tuner_0_table[] = {
		1805	TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL,
		1806	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		1807	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		1808	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
		1809	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
		1810	#if 0
		1811	int tuner_0_fm_table[] = {
		1812	PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
		1813	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		1814	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		1815	PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
		1816	PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
		1817	#endif
		1818
		1819	int tuner_1_table[] = {
		1820	TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
		1821	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		1822	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		1823	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
		1824	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
		1825
		1826	static void avermedia_eeprom(struct bttv *btv)
		1827	{
		1828	int tuner_make,tuner_tv_fm,tuner_format,tuner=0,remote;
		1829
		1830	tuner_make = (eeprom_data[0x41] & 0x7);
		1831	tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
		1832	tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
		1833	remote = (eeprom_data[0x42] & 0x01);
		1834
		1835	if (tuner_make == 0 \|\| tuner_make == 2)
		1836	if(tuner_format <=9)
		1837	tuner = tuner_0_table[tuner_format];
		1838	if (tuner_make == 1)
		1839	if(tuner_format <=9)
		1840	tuner = tuner_1_table[tuner_format];
		1841
		1842	cprintf("[info ] bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
		1843	btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
		1844	if(tuner) {
		1845	btv->tuner_type=tuner;
		1846	cprintf("%d",tuner);
		1847	} else
		1848	cprintf("Unknown type");
		1849	cprintf(" radio:%s remote control:%s\n",
		1850	tuner_tv_fm?"yes":"no",
		1851	remote?"yes":"no");
		1852	}
		1853
		1854	/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
		1855	void bttv_tda9880_setnorm(struct bttv *btv, int norm)
		1856	{
		1857	// fix up our card entry
		1858	if(norm==VIDEO_MODE_NTSC) {
		1859	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
		1860	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
		1861	dprintk("bttv_tda9880_setnorm to NTSC\n");
		1862	}
		1863	else {
		1864	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
		1865	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
		1866	dprintk("bttv_tda9880_setnorm to PAL\n");
		1867	}
		1868	// set GPIO according
		1869	gpioaor(bttv_tvcards[btv->type].audiomux[btv->audio],
		1870	~bttv_tvcards[btv->type].gpiomask);
		1871	}
		1872
		1873
		1874	/*
		1875	* reset/enable the MSP on some Hauppauge cards
		1876	* Thanks to Ky�sti M�lkki (kmalkki@cc.hut.fi)!
		1877	*
		1878	* Hauppauge: pin 5
		1879	* Voodoo: pin 20
		1880	*/
		1881	static void boot_msp34xx(struct bttv *btv, int pin)
		1882	{
		1883	int mask = (1 << pin);
		1884
		1885	btor(mask, BT848_GPIO_OUT_EN);
		1886	gpioand(~mask);
		1887	udelay(2500);
		1888	gpioor(mask);
		1889	if (bttv_gpio)
		1890	bttv_gpio_tracking(btv,"msp34xx");
		1891
		1892	if (bttv_verbose)
		1893	printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
		1894	"init [%d]\n", btv->nr, pin);
		1895	}
		1896
		1897
		1898	/* ----------------------------------------------------------------------- */
		1899	/* Imagenation L-Model PXC200 Framegrabber */
		1900	/* This is basically the same procedure as
		1901	* used by Alessandro Rubini in his pxc200
		1902	* driver, but using BTTV functions */
		1903
		1904	static void init_PXC200(struct bttv *btv)
		1905	{
		1906	/* Initialise GPIO-connevted stuff */
		1907	btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
		1908	gpiowrite(0);
		1909	udelay(3);
		1910	gpiowrite(1<<13);
		1911	/* GPIO inputs are pulled up, so no need to drive
		1912	* reset pin any longer */
		1913	btwrite(0,BT848_GPIO_OUT_EN);
		1914	if (bttv_gpio)
		1915	bttv_gpio_tracking(btv,"pxc200");
		1916
		1917	/* we could/should try and reset/control the AD pots? but
		1918	right now we simply turned off the crushing. Without
		1919	this the AGC drifts drifts
		1920	remember the EN is reverse logic -->
		1921	setting BT848_ADC_AGC_EN disable the AGC
		1922	tboult@eecs.lehigh.edu
		1923	*/
		1924	btwrite(BT848_ADC_RESERVED\|BT848_ADC_AGC_EN, BT848_ADC);
		1925
		1926	/* Initialise MAX517 DAC */
		1927	printk(KERN_INFO "Setting DAC reference voltage level ...\n");
		1928	bttv_I2CWrite(btv,0x5E,0,0x80,1);
		1929
		1930	/* Initialise 12C508 PIC */
		1931	/* The I2CWrite and I2CRead commmands are actually to the
		1932	* same chips - but the R/W bit is included in the address
		1933	* argument so the numbers are different */
		1934
		1935	printk(KERN_INFO "PXC200 Initialised.\n");
		1936	}
		1937
		1938	/* ----------------------------------------------------------------------- */
		1939	/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
		1940	/*
		1941	* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
		1942	* This code is placed under the terms of the GNU General Public License
		1943	*
		1944	* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
		1945	*/
		1946
		1947	#if 0
		1948	/* bus bits on the GPIO port */
		1949	#define TEA_WE 6
		1950	#define TEA_DATA 9
		1951	#define TEA_CLK 8
		1952	#define TEA_MOST 7
		1953	#endif
		1954
		1955	#define BUS_LOW(bit) gpioand(~(bit))
		1956	#define BUS_HIGH(bit) gpioor((bit))
		1957	#define BUS_IN(bit) (gpioread() & (bit))
		1958
		1959	/* TEA5757 register bits */
		1960	#define TEA_FREQ 0:14
		1961	#define TEA_BUFFER 15:15
		1962
		1963	#define TEA_SIGNAL_STRENGTH 16:17
		1964
		1965	#define TEA_PORT1 18:18
		1966	#define TEA_PORT0 19:19
		1967
		1968	#define TEA_BAND 20:21
		1969	#define TEA_BAND_FM 0
		1970	#define TEA_BAND_MW 1
		1971	#define TEA_BAND_LW 2
		1972	#define TEA_BAND_SW 3
		1973
		1974	#define TEA_MONO 22:22
		1975	#define TEA_ALLOW_STEREO 0
		1976	#define TEA_FORCE_MONO 1
		1977
		1978	#define TEA_SEARCH_DIRECTION 23:23
		1979	#define TEA_SEARCH_DOWN 0
		1980	#define TEA_SEARCH_UP 1
		1981
		1982	#define TEA_STATUS 24:24
		1983	#define TEA_STATUS_TUNED 0
		1984	#define TEA_STATUS_SEARCHING 1
		1985
		1986	/* ----------------------------------------------------------------------- */
		1987	/* winview */
		1988
		1989	void winview_audio(struct bttv btv, struct video_audio v, int set)
		1990	{
		1991	/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
		1992	int bits_out, loops, vol, data;
		1993
		1994	if (!set) {
		1995	/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
		1996	v->flags \|= VIDEO_AUDIO_VOLUME;
		1997	return;
		1998	}
		1999
		2000	/* 32 levels logarithmic */
		2001	vol = 32 - ((v->volume>>11));
		2002	/* units */
		2003	bits_out = (PT2254_DBS_IN_2>>(vol%5));
		2004	/* tens */
		2005	bits_out \|= (PT2254_DBS_IN_10>>(vol/5));
		2006	bits_out \|= PT2254_L_CHANNEL \| PT2254_R_CHANNEL;
		2007	data = gpioread();
		2008	data &= ~(WINVIEW_PT2254_CLK\| WINVIEW_PT2254_DATA\|
		2009	WINVIEW_PT2254_STROBE);
		2010	for (loops = 17; loops >= 0 ; loops--) {
		2011	if (bits_out & (1<<loops))
		2012	data \|= WINVIEW_PT2254_DATA;
		2013	else
		2014	data &= ~WINVIEW_PT2254_DATA;
		2015	gpiowrite(data);
		2016	udelay(5);
		2017	data \|= WINVIEW_PT2254_CLK;
		2018	gpiowrite(data);
		2019	udelay(5);
		2020	data &= ~WINVIEW_PT2254_CLK;
		2021	gpiowrite(data);
		2022	}
		2023	data \|= WINVIEW_PT2254_STROBE;
		2024	data &= ~WINVIEW_PT2254_DATA;
		2025	gpiowrite(data);
		2026	udelay(10);
		2027	data &= ~WINVIEW_PT2254_STROBE;
		2028	gpiowrite(data);
		2029	}
		2030
		2031	/* ----------------------------------------------------------------------- */
		2032	/* mono/stereo control for various cards (which don't use i2c chips but */
		2033	/* connect something to the GPIO pins */
		2034
		2035	static void
		2036	gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set)
		2037	{
		2038	unsigned int con = 0;
		2039
		2040	if (set) {
		2041	btor(0x300, BT848_GPIO_OUT_EN);
		2042	if (v->mode & VIDEO_SOUND_LANG1)
		2043	con = 0x000;
		2044	if (v->mode & VIDEO_SOUND_LANG2)
		2045	con = 0x300;
		2046	if (v->mode & VIDEO_SOUND_STEREO)
		2047	con = 0x200;
		2048	// if (v->mode & VIDEO_SOUND_MONO)
		2049	// con = 0x100;
		2050	gpioaor(con, ~0x300);
		2051	} else {
		2052	v->mode = VIDEO_SOUND_STEREO \|
		2053	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2054	}
		2055	}
		2056
		2057	/*
		2058	* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
		2059	* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
		2060	* 0xdde enables mono and 0xccd enables sap
		2061	*
		2062	* Petr Vandrovec <VANDROVE@vc.cvut.cz>
		2063	* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
		2064	* input/output sound connection, so both must be set for output mode.
		2065	*
		2066	* Looks like it's needed only for the "tvphone", the "tvphone 98"
		2067	* handles this with a tda9840
		2068	*
		2069	*/
		2070	static void
		2071	avermedia_tvphone_audio(struct bttv btv, struct video_audio v, int set)
		2072	{
		2073	int val = 0;
		2074
		2075	if (set) {
		2076	if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
		2077	val = 0x02;
		2078	if (v->mode & VIDEO_SOUND_STEREO)
		2079	val = 0x01;
		2080	if (val) {
		2081	gpioaor(val, ~0x03);
		2082	if (bttv_gpio)
		2083	bttv_gpio_tracking(btv,"avermedia");
		2084	}
		2085	} else {
		2086	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2087	VIDEO_SOUND_LANG1;
		2088	return;
		2089	}
		2090	}
		2091
		2092	/* Lifetec 9415 handling */
		2093	static void
		2094	lt9415_audio(struct bttv btv, struct video_audio v, int set)
		2095	{
		2096	int val = 0;
		2097
		2098	if (gpioread() & 0x4000) {
		2099	v->mode = VIDEO_SOUND_MONO;
		2100	return;
		2101	}
		2102
		2103	if (set) {
		2104	if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
		2105	val = 0x0080;
		2106	if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
		2107	val = 0x0880;
		2108	if ((v->mode & VIDEO_SOUND_LANG1) \|\|
		2109	(v->mode & VIDEO_SOUND_MONO))
		2110	val = 0;
		2111	gpioaor(val, ~0x0880);
		2112	if (bttv_gpio)
		2113	bttv_gpio_tracking(btv,"lt9415");
		2114	} else {
		2115	/* autodetect doesn't work with this card :-( */
		2116	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2117	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2118	return;
		2119	}
		2120	}
		2121
		2122
		2123	static void
		2124	terratv_audio(struct bttv btv, struct video_audio v, int set)
		2125	{
		2126	unsigned int con = 0;
		2127
		2128	if (set) {
		2129	btor(0x180000, BT848_GPIO_OUT_EN);
		2130	if (v->mode & VIDEO_SOUND_LANG2)
		2131	con = 0x080000;
		2132	if (v->mode & VIDEO_SOUND_STEREO)
		2133	con = 0x180000;
		2134	gpioaor(con, ~0x180000);
		2135	if (bttv_gpio)
		2136	bttv_gpio_tracking(btv,"terratv");
		2137	} else {
		2138	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2139	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2140	}
		2141	}
		2142
		2143	static void
		2144	winfast2000_audio(struct bttv btv, struct video_audio v, int set)
		2145	{
		2146	unsigned long val = 0;
		2147
		2148	if (set) {
		2149	/btor (0xc32000, BT848_GPIO_OUT_EN);/
		2150	if (v->mode & VIDEO_SOUND_MONO) /* Mono */
		2151	val = 0x420000;
		2152	if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
		2153	val = 0x420000;
		2154	if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
		2155	val = 0x410000;
		2156	if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
		2157	val = 0x020000;
		2158	if (val) {
		2159	gpioaor(val, ~0x430000);
		2160	if (bttv_gpio)
		2161	bttv_gpio_tracking(btv,"winfast2000");
		2162	}
		2163	} else {
		2164	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2165	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2166	}
		2167	}
		2168
		2169	/*
		2170	* Dariusz Kowalewski <darekk@automex.pl>
		2171	* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
		2172	* revision 9B has on-board TDA9874A sound decoder).
		2173	*/
		2174	static void
		2175	pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set)
		2176	{
		2177	unsigned int val = 0;
		2178
		2179	if (btv->radio)
		2180	return;
		2181
		2182	if (set) {
		2183	if (v->mode & VIDEO_SOUND_MONO) {
		2184	val = 0x01;
		2185	}
		2186	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		2187	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		2188	val = 0x02;
		2189	}
		2190	if (val) {
		2191	gpioaor(val, ~0x03);
		2192	if (bttv_gpio)
		2193	bttv_gpio_tracking(btv,"pvbt878p9b");
		2194	}
		2195	} else {
		2196	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2197	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2198	}
		2199	}
		2200
		2201	/*
		2202	* Dariusz Kowalewski <darekk@automex.pl>
		2203	* sound control for FlyVideo 2000S (with tda9874 decoder)
		2204	* based on pvbt878p9b_audio() - this is not tested, please fix!!!
		2205	*/
		2206	static void
		2207	fv2000s_audio(struct bttv btv, struct video_audio v, int set)
		2208	{
		2209	unsigned int val = 0xffff;
		2210
		2211	if (btv->radio)
		2212	return;
		2213
		2214	if (set) {
		2215	if (v->mode & VIDEO_SOUND_MONO) {
		2216	val = 0x0000;
		2217	}
		2218	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		2219	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		2220	val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
		2221	}
		2222	if (val != 0xffff) {
		2223	gpioaor(val, ~0x1800);
		2224	if (bttv_gpio)
		2225	bttv_gpio_tracking(btv,"fv2000s");
		2226	}
		2227	} else {
		2228	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2229	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2230	}
		2231	}
		2232
		2233	/*
		2234	* sound control for Canopus WinDVR PCI
		2235	* Masaki Suzuki <masaki@btree.org>
		2236	*/
		2237	static void
		2238	windvr_audio(struct bttv btv, struct video_audio v, int set)
		2239	{
		2240	unsigned long val = 0;
		2241
		2242	if (set) {
		2243	if (v->mode & VIDEO_SOUND_MONO)
		2244	val = 0x040000;
		2245	if (v->mode & VIDEO_SOUND_LANG1)
		2246	val = 0;
		2247	if (v->mode & VIDEO_SOUND_LANG2)
		2248	val = 0x100000;
		2249	if (v->mode & VIDEO_SOUND_STEREO)
		2250	val = 0;
		2251	if (val) {
		2252	gpioaor(val, ~0x140000);
		2253	if (bttv_gpio)
		2254	bttv_gpio_tracking(btv,"windvr");
		2255	}
		2256	} else {
		2257	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		2258	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		2259	}
		2260	}
		2261
		2262	/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
		2263	*
		2264	* This is needed because rv605 don't use a normal multiplex, but a crosspoint
		2265	* switch instead (CD22M3494E). This IC can have multiple active connections
		2266	* between Xn (input) and Yn (output) pins. We need to clear any existing
		2267	* connection prior to establish a new one, pulsing the STROBE pin.
		2268	*
		2269	* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
		2270	* GPIO pins are wired as:
		2271	* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
		2272	* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
		2273	* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
		2274	* GPIO[8] - - P3[5] (microcontroler)
		2275	* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
		2276	* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
		2277	* GPINTR - - P3[4] (microcontroler)
		2278	*
		2279	* The microcontroler is a 80C32 like. It should be possible to change xpoint
		2280	* configuration either directly (as we are doing) or using the microcontroler
		2281	* which is also wired to I2C interface. I have no further info on the
		2282	* microcontroler features, one would need to disassembly the firmware.
		2283	* note: the vendor refused to give any information on this product, all
		2284	* that stuff was found using a multimeter! :)
		2285	*/
		2286	static void rv605_muxsel(struct bttv *btv, unsigned int input)
		2287	{
		2288	/* reset all conections */
		2289	gpioaor(0x200,~0x200);
		2290	udelay(1000);
		2291	gpioaor(0x000,~0x200);
		2292	udelay(1000);
		2293
		2294	/* create a new conection */
		2295	gpioaor(0x080,~0x480);
		2296	gpioaor(0x480,~0x480);
		2297	udelay(1000);
		2298	gpioaor(0x080,~0x480);
		2299	udelay(1000);
		2300	}
		2301
		2302
		2303	/* ----------------------------------------------------------------------- */
		2304	/* motherboard chipset specific stuff */
		2305
		2306	void bttv_check_chipset(void)
		2307	{
		2308	int pcipci_fail = 0;
		2309	struct pci_dev dev;
		2310	BYTE bus, dv;
		2311
181	giacomo	2312	triton1 = 0;
		2313	vsfx = 0;
170	giacomo	2314
		2315	if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, 0, &bus, &dv)) pcipci_fail = 1;
		2316	if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, 0, &bus, &dv)) pcipci_fail = 1;
		2317	if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, 0, &bus, &dv)) triton1 = 1;
		2318	if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, 0, &bus, &dv)) triton1 = 1;
		2319	if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, 0, &bus, &dv)) triton1 = 1;
		2320	if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, 0, &bus, &dv)) vsfx = 1;
		2321
		2322	/* print warnings about any quirks found */
		2323	if (triton1)
		2324	printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
		2325	if (vsfx)
		2326	printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
		2327
		2328	if (pcipci_fail) {
		2329	printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
		2330	if (-1 == no_overlay) {
		2331	printk(KERN_WARNING "bttv: going to disable overlay.\n");
		2332	no_overlay = 1;
		2333	}
		2334	}
		2335
		2336	if(pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, 0, &bus, &dv)) {
		2337	unsigned char b;
		2338	dev.bus->number = bus;
		2339	dev.devfn = dv;
		2340	pci_read_config_byte(&dev, 0x53, &b);
		2341	if (bttv_debug)
		2342	printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
		2343	"bufcon=0x%02x\n",b);
		2344	}
		2345
		2346	}
		2347
		2348	int bttv_handle_chipset(struct bttv *btv)
		2349	{
		2350	unsigned char command;
		2351
		2352	if (!triton1 && !vsfx)
		2353	return 0;
		2354
		2355	if (bttv_verbose) {
		2356	if (triton1)
		2357	printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
		2358	if (vsfx && btv->id >= 878)
		2359	printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
		2360	}
		2361
		2362	if (btv->id < 878) {
		2363	/* bt848 (mis)uses a bit in the irq mask for etbf */
		2364	if (triton1)
		2365	btv->triton1 = BT848_INT_ETBF;
		2366	} else {
		2367	/* bt878 has a bit in the pci config space for it */
		2368	pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
		2369	if (triton1)
		2370	command \|= BT878_EN_TBFX;
		2371	if (vsfx)
		2372	command \|= BT878_EN_VSFX;
		2373	pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
		2374	}
		2375	return 0;
		2376	}
		2377

Subversion Repositories shark

(root)/shark/trunk/drivers/bttv/bttv-cards.c - Rev 181