WebSVN - shark - Blame - Rev 428 - /shark/trunk/drivers/bttv/bttv-cards.c

Rev	Author	Line No.	Line
170	giacomo	1	/*
		2	bttv-cards.c
		3
		4	this file has configuration informations - card-specific stuff
		5	like the big tvcards array for the most part
		6
		7	Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
		8	& Marcus Metzler (mocm@thp.uni-koeln.de)
		9	(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
		10
		11	This program is free software; you can redistribute it and/or modify
		12	it under the terms of the GNU General Public License as published by
		13	the Free Software Foundation; either version 2 of the License, or
		14	(at your option) any later version.
		15
		16	This program is distributed in the hope that it will be useful,
		17	but WITHOUT ANY WARRANTY; without even the implied warranty of
		18	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		19	GNU General Public License for more details.
		20
		21	You should have received a copy of the GNU General Public License
		22	along with this program; if not, write to the Free Software
		23	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
428	giacomo	24
170	giacomo	25	*/
		26
428	giacomo	27	#include <linuxcomp.h>
170	giacomo	28
428	giacomo	29	#include <linux/config.h>
		30	#include <linux/delay.h>
		31	#include <linux/module.h>
		32	#include <linux/kmod.h>
		33	#include <linux/init.h>
170	giacomo	34	#include <linux/pci.h>
428	giacomo	35	#include <linux/vmalloc.h>
		36	#ifdef CONFIG_FW_LOADER
		37	# include <linux/firmware.h>
		38	#endif
170	giacomo	39
428	giacomo	40	#include <asm/io.h>
170	giacomo	41
428	giacomo	42	#include "drivers/bttvp.h"
		43	#include "drivers/bt832.h"
		44
170	giacomo	45	/* fwd decl */
		46	static void boot_msp34xx(struct bttv *btv, int pin);
428	giacomo	47	static void boot_bt832(struct bttv *btv);
170	giacomo	48	static void hauppauge_eeprom(struct bttv *btv);
428	giacomo	49	static void avermedia_eeprom(struct bttv *btv);
170	giacomo	50	static void osprey_eeprom(struct bttv *btv);
428	giacomo	51	static void modtec_eeprom(struct bttv *btv);
170	giacomo	52	static void init_PXC200(struct bttv *btv);
		53
		54	static void winview_audio(struct bttv btv, struct video_audio v, int set);
		55	static void lt9415_audio(struct bttv btv, struct video_audio v, int set);
		56	static void avermedia_tvphone_audio(struct bttv btv, struct video_audio v,
		57	int set);
		58	static void terratv_audio(struct bttv btv, struct video_audio v, int set);
		59	static void gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set);
		60	static void winfast2000_audio(struct bttv btv, struct video_audio v, int set);
		61	static void pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set);
		62	static void fv2000s_audio(struct bttv btv, struct video_audio v, int set);
		63	static void windvr_audio(struct bttv btv, struct video_audio v, int set);
428	giacomo	64	static void adtvk503_audio(struct bttv btv, struct video_audio v, int set);
170	giacomo	65	static void rv605_muxsel(struct bttv *btv, unsigned int input);
428	giacomo	66	static void eagle_muxsel(struct bttv *btv, unsigned int input);
		67	static void xguard_muxsel(struct bttv *btv, unsigned int input);
		68	static void ivc120_muxsel(struct bttv *btv, unsigned int input);
170	giacomo	69
428	giacomo	70	static int terratec_active_radio_upgrade(struct bttv *btv);
		71	static int tea5757_read(struct bttv *btv);
		72	static int tea5757_write(struct bttv *btv, int value);
		73	static void identify_by_eeprom(struct bttv *btv,
		74	unsigned char eeprom_data[256]);
		75
170	giacomo	76	/* config variables */
428	giacomo	77	static unsigned int triton1=0;
		78	static unsigned int vsfx=0;
		79	static unsigned int latency = UNSET;
		80	unsigned int no_overlay=-1;
170	giacomo	81
428	giacomo	82	static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		83	static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		84	static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		85	static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		86	#ifdef MODULE
		87	static unsigned int autoload = 1;
		88	#else
		89	static unsigned int autoload = 0;
		90	#endif
		91	static unsigned int gpiomask = UNSET;
		92	static unsigned int audioall = UNSET;
		93	static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
		94
		95	/* insmod options */
		96	MODULE_PARM(triton1,"i");
		97	MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
		98	"[enable bug compatibility for triton1 + others]");
		99	MODULE_PARM(vsfx,"i");
		100	MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
		101	"[yet another chipset flaw workaround]");
		102	MODULE_PARM(no_overlay,"i");
		103	MODULE_PARM(latency,"i");
		104	MODULE_PARM_DESC(latency,"pci latency timer");
		105	MODULE_PARM(card,"1-" __stringify(BTTV_MAX) "i");
		106	MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
		107	MODULE_PARM(pll,"1-" __stringify(BTTV_MAX) "i");
		108	MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
		109	MODULE_PARM(tuner,"1-" __stringify(BTTV_MAX) "i");
		110	MODULE_PARM_DESC(tuner,"specify installed tuner type");
		111	MODULE_PARM(autoload,"i");
		112	MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
		113	MODULE_PARM(gpiomask,"i");
		114	MODULE_PARM(audioall,"i");
		115	MODULE_PARM(audiomux,"1-5i");
		116
		117	/* kernel args */
		118	#ifndef MODULE
		119	static int __init p_card(char *str) { return bttv_parse(str,BTTV_MAX,card); }
		120	static int __init p_pll(char *str) { return bttv_parse(str,BTTV_MAX,pll); }
		121	static int __init p_tuner(char *str) { return bttv_parse(str,BTTV_MAX,tuner); }
		122	__setup("bttv.card=", p_card);
		123	__setup("bttv.pll=", p_pll);
		124	__setup("bttv.tuner=", p_tuner);
		125
		126	int __init bttv_parse(char str, int max, int vals)
		127	{
		128	int i,number,res = 2;
		129
		130	for (i = 0; res == 2 && i < max; i++) {
		131	res = get_option(&str,&number);
		132	if (res)
		133	vals[i] = number;
		134	}
		135	return 1;
		136	}
		137	#endif
		138
170	giacomo	139	/* ----------------------------------------------------------------------- */
		140	/* list of card IDs for bt878+ cards */
		141
		142	static struct CARD {
		143	unsigned id;
		144	int cardnr;
		145	char *name;
428	giacomo	146	} cards[] __devinitdata = {
170	giacomo	147	{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
		148	{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
428	giacomo	149	{ 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
170	giacomo	150	{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
		151	{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
428	giacomo	152	{ 0xff020070, BTTV_OSPREY500, "Osprey-500" },
170	giacomo	153	{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
428	giacomo	154	{ 0xff040070, BTTV_OSPREY540, "Osprey-540" },
170	giacomo	155
		156	{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
		157	{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
		158
		159	{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
428	giacomo	160	{ 0x6607107d, BTTV_WINFAST2000, "Leadtek WinFast VC 100" },
		161	{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
		162	{ 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
170	giacomo	163	{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
		164	{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
428	giacomo	165	{ 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
170	giacomo	166
		167	{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
428	giacomo	168	{ 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
		169	// some cards ship with byteswapped IDs ...
		170	{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
		171	{ 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
170	giacomo	172
		173	{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
428	giacomo	174	{ 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
170	giacomo	175
		176	{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
		177	{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
		178	{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
428	giacomo	179	{ 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
170	giacomo	180
		181	{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		182	{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
		183	{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		184	{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
428	giacomo	185	{ 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
170	giacomo	186
		187	{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
		188	{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
		189
428	giacomo	190	{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
		191	{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
		192	{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
		193	{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
		194
170	giacomo	195	{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
428	giacomo	196	{ 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
		197	// clashes with FlyVideo
		198	//{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
		199	{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
		200	{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
		201	{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
170	giacomo	202
428	giacomo	203	{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
170	giacomo	204	{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
		205	{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		206	{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		207	{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		208
428	giacomo	209	{ 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
		210	{ 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
		211	{ 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
		212	{ 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
		213
		214	{ 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
		215	{ 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
		216	{ 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
		217	{ 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
		218
		219	{ 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
		220	{ 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
		221	{ 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
		222	{ 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
		223
		224	{ 0xa132ff00, BTTV_IVC100, "IVC-100" },
		225	{ 0xa1550000, BTTV_IVC200, "IVC-200" },
		226	{ 0xa1550001, BTTV_IVC200, "IVC-200" },
		227	{ 0xa1550002, BTTV_IVC200, "IVC-200" },
		228	{ 0xa1550003, BTTV_IVC200, "IVC-200" },
		229	{ 0xa1550100, BTTV_IVC200, "IVC-200G" },
		230	{ 0xa1550101, BTTV_IVC200, "IVC-200G" },
		231	{ 0xa1550102, BTTV_IVC200, "IVC-200G" },
		232	{ 0xa1550103, BTTV_IVC200, "IVC-200G" },
		233	{ 0xa182ff00, BTTV_IVC120, "IVC-120G" },
		234	{ 0xa182ff01, BTTV_IVC120, "IVC-120G" },
		235	{ 0xa182ff02, BTTV_IVC120, "IVC-120G" },
		236	{ 0xa182ff03, BTTV_IVC120, "IVC-120G" },
		237	{ 0xa182ff04, BTTV_IVC120, "IVC-120G" },
		238	{ 0xa182ff05, BTTV_IVC120, "IVC-120G" },
		239	{ 0xa182ff06, BTTV_IVC120, "IVC-120G" },
		240	{ 0xa182ff07, BTTV_IVC120, "IVC-120G" },
		241	{ 0xa182ff08, BTTV_IVC120, "IVC-120G" },
		242	{ 0xa182ff09, BTTV_IVC120, "IVC-120G" },
		243	{ 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
		244	{ 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
		245	{ 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
		246	{ 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
		247	{ 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
		248	{ 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
		249
		250	{ 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
		251	{ 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
		252
170	giacomo	253	{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
428	giacomo	254	{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
		255	{ 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
		256	{ 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
		257	{ 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
170	giacomo	258	{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
		259	{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		260	{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
		261	{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
		262	{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
428	giacomo	263	{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
170	giacomo	264
428	giacomo	265	// likely broken, vendor id doesn't match the other magic views ...
		266	//{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
		267
170	giacomo	268	{ 0, -1, NULL }
		269	};
		270
		271	/* ----------------------------------------------------------------------- */
		272	/* array with description for bt848 / bt878 tv/grabber cards */
		273
		274	struct tvcard bttv_tvcards[] = {
		275	{
		276	/* ---- card 0x00 ---------------------------------- */
428	giacomo	277	.name = " * UNKNOWN/GENERIC * ",
		278	.video_inputs = 4,
		279	.audio_inputs = 1,
		280	.tuner = 0,
		281	.svhs = 2,
		282	.muxsel = { 2, 3, 1, 0},
		283	.tuner_type = -1,
170	giacomo	284	},{
428	giacomo	285	.name = "MIRO PCTV",
		286	.video_inputs = 4,
		287	.audio_inputs = 1,
		288	.tuner = 0,
		289	.svhs = 2,
		290	.gpiomask = 15,
		291	.muxsel = { 2, 3, 1, 1},
		292	.audiomux = { 2, 0, 0, 0, 10},
		293	.needs_tvaudio = 1,
		294	.tuner_type = -1,
170	giacomo	295	},{
428	giacomo	296	.name = "Hauppauge (bt848)",
		297	.video_inputs = 4,
		298	.audio_inputs = 1,
		299	.tuner = 0,
		300	.svhs = 2,
		301	.gpiomask = 7,
		302	.muxsel = { 2, 3, 1, 1},
		303	.audiomux = { 0, 1, 2, 3, 4},
		304	.needs_tvaudio = 1,
		305	.tuner_type = -1,
170	giacomo	306	},{
428	giacomo	307	.name = "STB, Gateway P/N 6000699 (bt848)",
		308	.video_inputs = 3,
		309	.audio_inputs = 1,
		310	.tuner = 0,
		311	.svhs = 2,
		312	.gpiomask = 7,
		313	.muxsel = { 2, 3, 1, 1},
		314	.audiomux = { 4, 0, 2, 3, 1},
		315	.no_msp34xx = 1,
		316	.needs_tvaudio = 1,
		317	.tuner_type = TUNER_PHILIPS_NTSC,
		318	.pll = PLL_28,
		319	.has_radio = 1,
170	giacomo	320	},{
		321
		322	/* ---- card 0x04 ---------------------------------- */
428	giacomo	323	.name = "Intel Create and Share PCI/ Smart Video Recorder III",
		324	.video_inputs = 4,
		325	.audio_inputs = 0,
		326	.tuner = -1,
		327	.svhs = 2,
		328	.gpiomask = 0,
		329	.muxsel = { 2, 3, 1, 1},
		330	.audiomux = { 0 },
		331	.needs_tvaudio = 0,
		332	.tuner_type = 4,
170	giacomo	333	},{
428	giacomo	334	.name = "Diamond DTV2000",
		335	.video_inputs = 4,
		336	.audio_inputs = 1,
		337	.tuner = 0,
		338	.svhs = 2,
		339	.gpiomask = 3,
		340	.muxsel = { 2, 3, 1, 0},
		341	.audiomux = { 0, 1, 0, 1, 3},
		342	.needs_tvaudio = 1,
		343	.tuner_type = -1,
170	giacomo	344	},{
428	giacomo	345	.name = "AVerMedia TVPhone",
		346	.video_inputs = 3,
		347	.audio_inputs = 1,
		348	.tuner = 0,
		349	.svhs = 3,
		350	.muxsel = { 2, 3, 1, 1},
		351	.gpiomask = 0x0f,
		352	.audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
170	giacomo	353	/* 0x04 for some cards ?? */
428	giacomo	354	.needs_tvaudio = 1,
		355	.tuner_type = -1,
		356	.audio_hook = avermedia_tvphone_audio,
170	giacomo	357	},{
428	giacomo	358	.name = "MATRIX-Vision MV-Delta",
		359	.video_inputs = 5,
		360	.audio_inputs = 1,
		361	.tuner = -1,
		362	.svhs = 3,
		363	.gpiomask = 0,
		364	.muxsel = { 2, 3, 1, 0, 0},
		365	.audiomux = {0 },
		366	.needs_tvaudio = 1,
		367	.tuner_type = -1,
170	giacomo	368	},{
		369
		370	/* ---- card 0x08 ---------------------------------- */
428	giacomo	371	.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
		372	.video_inputs = 4,
		373	.audio_inputs = 1,
		374	.tuner = 0,
		375	.svhs = 2,
		376	.gpiomask = 0xc00,
		377	.muxsel = { 2, 3, 1, 1},
		378	.audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
		379	.needs_tvaudio = 1,
		380	.pll = PLL_28,
		381	.tuner_type = -1,
170	giacomo	382	},{
428	giacomo	383	.name = "IMS/IXmicro TurboTV",
		384	.video_inputs = 3,
		385	.audio_inputs = 1,
		386	.tuner = 0,
		387	.svhs = 2,
		388	.gpiomask = 3,
		389	.muxsel = { 2, 3, 1, 1},
		390	.audiomux = { 1, 1, 2, 3, 0},
		391	.needs_tvaudio = 0,
		392	.pll = PLL_28,
		393	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	394	},{
428	giacomo	395	.name = "Hauppauge (bt878)",
		396	.video_inputs = 4,
		397	.audio_inputs = 1,
		398	.tuner = 0,
		399	.svhs = 2,
		400	.gpiomask = 0x0f, /* old: 7 */
		401	.muxsel = { 2, 0, 1, 1},
		402	.audiomux = { 0, 1, 2, 3, 4},
		403	.needs_tvaudio = 1,
		404	.pll = PLL_28,
		405	.tuner_type = -1,
170	giacomo	406	},{
428	giacomo	407	.name = "MIRO PCTV pro",
		408	.video_inputs = 3,
		409	.audio_inputs = 1,
		410	.tuner = 0,
		411	.svhs = 2,
		412	.gpiomask = 0x3014f,
		413	.muxsel = { 2, 3, 1, 1},
		414	.audiomux = { 0x20001,0x10001, 0, 0,10},
		415	.needs_tvaudio = 1,
		416	.tuner_type = -1,
170	giacomo	417	},{
		418
		419	/* ---- card 0x0c ---------------------------------- */
428	giacomo	420	.name = "ADS Technologies Channel Surfer TV (bt848)",
		421	.video_inputs = 3,
		422	.audio_inputs = 1,
		423	.tuner = 0,
		424	.svhs = 2,
		425	.gpiomask = 15,
		426	.muxsel = { 2, 3, 1, 1},
		427	.audiomux = { 13, 14, 11, 7, 0, 0},
		428	.needs_tvaudio = 1,
		429	.tuner_type = -1,
170	giacomo	430	},{
428	giacomo	431	.name = "AVerMedia TVCapture 98",
		432	.video_inputs = 3,
		433	.audio_inputs = 4,
		434	.tuner = 0,
		435	.svhs = 2,
		436	.gpiomask = 15,
		437	.muxsel = { 2, 3, 1, 1},
		438	.audiomux = { 13, 14, 11, 7, 0, 0},
		439	.needs_tvaudio = 1,
		440	.msp34xx_alt = 1,
		441	.pll = PLL_28,
		442	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	443	},{
428	giacomo	444	.name = "Aimslab Video Highway Xtreme (VHX)",
		445	.video_inputs = 3,
		446	.audio_inputs = 1,
		447	.tuner = 0,
		448	.svhs = 2,
		449	.gpiomask = 7,
		450	.muxsel = { 2, 3, 1, 1},
		451	.audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
		452	.needs_tvaudio = 1,
		453	.pll = PLL_28,
		454	.tuner_type = -1,
170	giacomo	455	},{
428	giacomo	456	.name = "Zoltrix TV-Max",
		457	.video_inputs = 3,
		458	.audio_inputs = 1,
		459	.tuner = 0,
		460	.svhs = 2,
		461	.gpiomask = 15,
		462	.muxsel = { 2, 3, 1, 1},
		463	.audiomux = {0 , 0, 1 , 0, 10},
		464	.needs_tvaudio = 1,
		465	.tuner_type = -1,
170	giacomo	466	},{
		467
		468	/* ---- card 0x10 ---------------------------------- */
428	giacomo	469	.name = "Prolink Pixelview PlayTV (bt878)",
		470	.video_inputs = 3,
		471	.audio_inputs = 1,
		472	.tuner = 0,
		473	.svhs = 2,
		474	.gpiomask = 0x01fe00,
		475	.muxsel = { 2, 3, 1, 1},
		476	.audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
		477	.needs_tvaudio = 1,
		478	.pll = PLL_28,
		479	.tuner_type = -1,
170	giacomo	480	},{
428	giacomo	481	.name = "Leadtek WinView 601",
		482	.video_inputs = 3,
		483	.audio_inputs = 1,
		484	.tuner = 0,
		485	.svhs = 2,
		486	.gpiomask = 0x8300f8,
		487	.muxsel = { 2, 3, 1, 1,0},
		488	.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
		489	.needs_tvaudio = 1,
		490	.tuner_type = -1,
		491	.audio_hook = winview_audio,
		492	.has_radio = 1,
170	giacomo	493	},{
428	giacomo	494	.name = "AVEC Intercapture",
		495	.video_inputs = 3,
		496	.audio_inputs = 2,
		497	.tuner = 0,
		498	.svhs = 2,
		499	.gpiomask = 0,
		500	.muxsel = {2, 3, 1, 1},
		501	.audiomux = {1, 0, 0, 0, 0},
		502	.needs_tvaudio = 1,
		503	.tuner_type = -1,
170	giacomo	504	},{
428	giacomo	505	.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
		506	.video_inputs = 4,
		507	.audio_inputs = 1,
		508	.tuner = -1,
		509	.svhs = -1,
		510	.gpiomask = 0x8dff00,
		511	.muxsel = { 2, 3, 1, 1},
		512	.audiomux = { 0 },
		513	.no_msp34xx = 1,
		514	.tuner_type = -1,
170	giacomo	515	},{
		516
		517	/* ---- card 0x14 ---------------------------------- */
428	giacomo	518	.name = "CEI Raffles Card",
		519	.video_inputs = 3,
		520	.audio_inputs = 3,
		521	.tuner = 0,
		522	.svhs = 2,
		523	.muxsel = {2, 3, 1, 1},
		524	.tuner_type = -1,
170	giacomo	525	},{
428	giacomo	526	.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
		527	.video_inputs = 4,
		528	.audio_inputs = 2, // tuner, line in
		529	.tuner = 0,
		530	.svhs = 2,
		531	.gpiomask = 0x1800,
		532	.muxsel = { 2, 3, 1, 1},
		533	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		534	.pll = PLL_28,
		535	.tuner_type = TUNER_PHILIPS_PAL_I,
170	giacomo	536	},{
428	giacomo	537	.name = "Askey CPH050/ Phoebe Tv Master + FM",
		538	.video_inputs = 3,
		539	.audio_inputs = 1,
		540	.tuner = 0,
		541	.svhs = 2,
		542	.gpiomask = 0xc00,
		543	.muxsel = { 2, 3, 1, 1},
		544	.audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
		545	.needs_tvaudio = 1,
		546	.pll = PLL_28,
		547	.tuner_type = -1,
170	giacomo	548	},{
428	giacomo	549	.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
		550	.video_inputs = 3,
		551	.audio_inputs = 1,
		552	.tuner = 0,
		553	.svhs = -1,
		554	.gpiomask = 7,
		555	.muxsel = { 2, 3, -1 },
		556	.digital_mode = DIGITAL_MODE_CAMERA,
		557	.audiomux = { 0, 0, 0, 0, 0 },
		558	.no_msp34xx = 1,
		559	.pll = PLL_28,
		560	.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
170	giacomo	561	},{
		562
		563	/* ---- card 0x18 ---------------------------------- */
428	giacomo	564	.name = "Askey CPH05X/06X (bt878) [many vendors]",
		565	.video_inputs = 3,
		566	.audio_inputs = 1,
		567	.tuner = 0,
		568	.svhs = 2,
		569	.gpiomask = 0xe00,
		570	.muxsel = { 2, 3, 1, 1},
		571	.audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
		572	.needs_tvaudio = 1,
		573	.pll = PLL_28,
		574	.tuner_type = -1,
170	giacomo	575	},{
428	giacomo	576	.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
		577	.video_inputs = 3,
		578	.audio_inputs = 1,
		579	.tuner = 0,
		580	.svhs = 2,
		581	.gpiomask = 0x1f0fff,
		582	.muxsel = { 2, 3, 1, 1},
		583	.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
		584	.needs_tvaudio = 0,
		585	.tuner_type = TUNER_PHILIPS_PAL,
		586	.audio_hook = terratv_audio,
170	giacomo	587	},{
428	giacomo	588	.name = "Hauppauge WinCam newer (bt878)",
		589	.video_inputs = 4,
		590	.audio_inputs = 1,
		591	.tuner = 0,
		592	.svhs = 3,
		593	.gpiomask = 7,
		594	.muxsel = { 2, 0, 1, 1},
		595	.audiomux = { 0, 1, 2, 3, 4},
		596	.needs_tvaudio = 1,
		597	.tuner_type = -1,
170	giacomo	598	},{
428	giacomo	599	.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
		600	.video_inputs = 4,
		601	.audio_inputs = 2,
		602	.tuner = 0,
		603	.svhs = 2,
		604	.gpiomask = 0x1800,
		605	.muxsel = { 2, 3, 1, 1},
		606	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		607	.pll = PLL_28,
		608	.tuner_type = TUNER_PHILIPS_SECAM,
170	giacomo	609	},{
		610
		611	/* ---- card 0x1c ---------------------------------- */
428	giacomo	612	.name = "Terratec TerraTV+ Version 1.1 (bt878)",
		613	.video_inputs = 3,
		614	.audio_inputs = 1,
		615	.tuner = 0,
		616	.svhs = 2,
		617	.gpiomask = 0x1f0fff,
		618	.muxsel = { 2, 3, 1, 1},
		619	.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
		620	.needs_tvaudio = 0,
		621	.tuner_type = TUNER_PHILIPS_PAL,
		622	.audio_hook = terratv_audio,
		623	/* GPIO wiring:
		624	External 20 pin connector (for Active Radio Upgrade board)
		625	gpio00: i2c-sda
		626	gpio01: i2c-scl
		627	gpio02: om5610-data
		628	gpio03: om5610-clk
		629	gpio04: om5610-wre
		630	gpio05: om5610-stereo
		631	gpio06: rds6588-davn
		632	gpio07: Pin 7 n.c.
		633	gpio08: nIOW
		634	gpio09+10: nIOR, nSEL ?? (bt878)
		635	gpio09: nIOR (bt848)
		636	gpio10: nSEL (bt848)
		637	Sound Routing:
		638	gpio16: u2-A0 (1st 4052bt)
		639	gpio17: u2-A1
		640	gpio18: u2-nEN
		641	gpio19: u4-A0 (2nd 4052)
		642	gpio20: u4-A1
		643	u4-nEN - GND
		644	Btspy:
		645	00000 : Cdrom (internal audio input)
		646	10000 : ext. Video audio input
		647	20000 : TV Mono
		648	a0000 : TV Mono/2
		649	1a0000 : TV Stereo
		650	30000 : Radio
		651	40000 : Mute
		652	*/
		653
170	giacomo	654	},{
		655	/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
428	giacomo	656	.name = "Imagenation PXC200",
		657	.video_inputs = 5,
		658	.audio_inputs = 1,
		659	.tuner = -1,
		660	.svhs = 1, /* was: 4 */
		661	.gpiomask = 0,
		662	.muxsel = { 2, 3, 1, 0, 0},
		663	.audiomux = { 0 },
		664	.needs_tvaudio = 1,
		665	.tuner_type = -1,
170	giacomo	666	},{
428	giacomo	667	.name = "Lifeview FlyVideo 98 LR50",
		668	.video_inputs = 4,
		669	.audio_inputs = 1,
		670	.tuner = 0,
		671	.svhs = 2,
		672	.gpiomask = 0x1800, //0x8dfe00
		673	.muxsel = { 2, 3, 1, 1},
		674	.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
		675	.pll = PLL_28,
		676	.tuner_type = -1,
170	giacomo	677	},{
428	giacomo	678	.name = "Formac iProTV, Formac ProTV I (bt848)",
		679	.video_inputs = 4,
		680	.audio_inputs = 1,
		681	.tuner = 0,
		682	.svhs = 3,
		683	.gpiomask = 1,
		684	.muxsel = { 2, 3, 1, 1},
		685	.audiomux = { 1, 0, 0, 0, 0 },
		686	.pll = PLL_28,
		687	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	688	},{
		689
		690	/* ---- card 0x20 ---------------------------------- */
428	giacomo	691	.name = "Intel Create and Share PCI/ Smart Video Recorder III",
		692	.video_inputs = 4,
		693	.audio_inputs = 0,
		694	.tuner = -1,
		695	.svhs = 2,
		696	.gpiomask = 0,
		697	.muxsel = { 2, 3, 1, 1},
		698	.audiomux = { 0 },
		699	.needs_tvaudio = 0,
		700	.tuner_type = 4,
170	giacomo	701	},{
428	giacomo	702	.name = "Terratec TerraTValue Version Bt878",
		703	.video_inputs = 3,
		704	.audio_inputs = 1,
		705	.tuner = 0,
		706	.svhs = 2,
		707	.gpiomask = 0xffff00,
		708	.muxsel = { 2, 3, 1, 1},
		709	.audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
		710	.needs_tvaudio = 1,
		711	.pll = PLL_28,
		712	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	713	},{
428	giacomo	714	.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
		715	.video_inputs = 4,
		716	.audio_inputs = 1,
		717	.tuner = 0,
		718	.svhs = 2,
		719	.gpiomask = 0xc33000,
		720	.muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
		721	.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000},
		722	/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
		723	gpio23 -- hef4052:nEnable (0x800000)
		724	gpio12 -- hef4052:A1
		725	gpio13 -- hef4052:A0
		726	0x0000: external audio
		727	0x1000: FM
		728	0x2000: TV
		729	0x3000: n.c.
		730	Note: There exists another variant "Winfast 2000" with tv stereo !?
		731	Note: eeprom only contains FF and pci subsystem id 107d:6606
		732	*/
		733	.needs_tvaudio = 0,
		734	.pll = PLL_28,
		735	.has_radio = 1,
		736	.tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
		737	.audio_hook = winfast2000_audio,
170	giacomo	738	},{
428	giacomo	739	.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
		740	.video_inputs = 4,
		741	.audio_inputs = 3,
		742	.tuner = 0,
		743	.svhs = 2,
		744	.gpiomask = 0x1800,
		745	.muxsel = { 2, 3, 1, 1},
		746	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		747	.pll = PLL_28,
		748	.tuner_type = -1,
170	giacomo	749	},{
		750
		751	/* ---- card 0x24 ---------------------------------- */
428	giacomo	752	.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
		753	.video_inputs = 4,
		754	.audio_inputs = 3,
		755	.tuner = 0,
		756	.svhs = 2,
		757	.gpiomask = 0x1800,
		758	.muxsel = { 2, 3, 1, 1},
		759	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		760	.pll = PLL_28,
		761	.tuner_type = -1,
		762	.has_radio = 1,
170	giacomo	763	},{
428	giacomo	764	.name = "Prolink PixelView PlayTV pro",
		765	.video_inputs = 3,
		766	.audio_inputs = 1,
		767	.tuner = 0,
		768	.svhs = 2,
		769	.gpiomask = 0xff,
		770	.muxsel = { 2, 3, 1, 1 },
		771	.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
		772	.no_msp34xx = 1,
		773	.pll = PLL_28,
		774	.tuner_type = -1,
170	giacomo	775	},{
428	giacomo	776	.name = "Askey CPH06X TView99",
		777	.video_inputs = 4,
		778	.audio_inputs = 1,
		779	.tuner = 0,
		780	.svhs = 2,
		781	.gpiomask = 0x551e00,
		782	.muxsel = { 2, 3, 1, 0},
		783	.audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
		784	.needs_tvaudio = 1,
		785	.pll = PLL_28,
		786	.tuner_type = 1,
170	giacomo	787	},{
428	giacomo	788	.name = "Pinnacle PCTV Studio/Rave",
		789	.video_inputs = 3,
		790	.audio_inputs = 1,
		791	.tuner = 0,
		792	.svhs = 2,
		793	.gpiomask = 0x03000F,
		794	.muxsel = { 2, 3, 1, 1},
		795	.audiomux = { 2, 0, 0, 0, 1},
		796	.needs_tvaudio = 1,
		797	.pll = PLL_28,
		798	.tuner_type = -1,
170	giacomo	799	},{
		800
		801	/* ---- card 0x28 ---------------------------------- */
428	giacomo	802	.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
		803	.video_inputs = 3,
		804	.audio_inputs = 1,
		805	.tuner = 0,
		806	.svhs = 2,
		807	.gpiomask = 7,
		808	.muxsel = { 2, 3, 1, 1},
		809	.audiomux = { 4, 0, 2, 3, 1},
		810	.no_msp34xx = 1,
		811	.needs_tvaudio = 1,
		812	.tuner_type = TUNER_PHILIPS_NTSC,
		813	.pll = PLL_28,
		814	.has_radio = 1,
170	giacomo	815	},{
428	giacomo	816	.name = "AVerMedia TVPhone 98",
		817	.video_inputs = 3,
		818	.audio_inputs = 4,
		819	.tuner = 0,
		820	.svhs = 2,
		821	.gpiomask = 15,
		822	.muxsel = { 2, 3, 1, 1},
		823	.audiomux = { 13, 4, 11, 7, 0, 0},
		824	.needs_tvaudio = 1,
		825	.pll = PLL_28,
		826	.tuner_type = -1,
		827	.has_radio = 1,
		828	.audio_hook = avermedia_tvphone_audio,
170	giacomo	829	},{
428	giacomo	830	.name = "ProVideo PV951", /* pic16c54 */
		831	.video_inputs = 3,
		832	.audio_inputs = 1,
		833	.tuner = 0,
		834	.svhs = 2,
		835	.gpiomask = 0,
		836	.muxsel = { 2, 3, 1, 1},
		837	.audiomux = { 0, 0, 0, 0, 0},
		838	.needs_tvaudio = 1,
		839	.no_msp34xx = 1,
		840	.pll = PLL_28,
		841	.tuner_type = 1,
170	giacomo	842	},{
428	giacomo	843	.name = "Little OnAir TV",
		844	.video_inputs = 3,
		845	.audio_inputs = 1,
		846	.tuner = 0,
		847	.svhs = 2,
		848	.gpiomask = 0xe00b,
		849	.muxsel = {2, 3, 1, 1},
		850	.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
		851	.no_msp34xx = 1,
		852	.tuner_type = -1,
170	giacomo	853	},{
		854
		855	/* ---- card 0x2c ---------------------------------- */
428	giacomo	856	.name = "Sigma TVII-FM",
		857	.video_inputs = 2,
		858	.audio_inputs = 1,
		859	.tuner = 0,
		860	.svhs = -1,
		861	.gpiomask = 3,
		862	.muxsel = {2, 3, 1, 1},
		863	.audiomux = {1, 1, 0, 2, 3},
		864	.no_msp34xx = 1,
		865	.pll = PLL_NONE,
		866	.tuner_type = -1,
170	giacomo	867	},{
428	giacomo	868	.name = "MATRIX-Vision MV-Delta 2",
		869	.video_inputs = 5,
		870	.audio_inputs = 1,
		871	.tuner = -1,
		872	.svhs = 3,
		873	.gpiomask = 0,
		874	.muxsel = { 2, 3, 1, 0, 0},
		875	.audiomux = {0 },
		876	.no_msp34xx = 1,
		877	.pll = PLL_28,
		878	.tuner_type = -1,
170	giacomo	879	},{
428	giacomo	880	.name = "Zoltrix Genie TV/FM",
		881	.video_inputs = 3,
		882	.audio_inputs = 1,
		883	.tuner = 0,
		884	.svhs = 2,
		885	.gpiomask = 0xbcf03f,
		886	.muxsel = { 2, 3, 1, 1},
		887	.audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
		888	.no_msp34xx = 1,
		889	.pll = PLL_28,
		890	.tuner_type = 21,
170	giacomo	891	},{
428	giacomo	892	.name = "Terratec TV/Radio+",
		893	.video_inputs = 3,
		894	.audio_inputs = 1,
		895	.tuner = 0,
		896	.svhs = 2,
		897	.gpiomask = 0x70000,
		898	.muxsel = { 2, 3, 1, 1},
		899	.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
		900	.needs_tvaudio = 1,
		901	.no_msp34xx = 1,
		902	.pll = PLL_35,
		903	.tuner_type = 1,
		904	.has_radio = 1,
170	giacomo	905	},{
		906
		907	/* ---- card 0x30 ---------------------------------- */
428	giacomo	908	.name = "Askey CPH03x/ Dynalink Magic TView",
		909	.video_inputs = 3,
		910	.audio_inputs = 1,
		911	.tuner = 0,
		912	.svhs = 2,
		913	.gpiomask = 15,
		914	.muxsel = { 2, 3, 1, 1},
		915	.audiomux = {2,0,0,0,1},
		916	.needs_tvaudio = 1,
		917	.pll = PLL_28,
		918	.tuner_type = -1,
170	giacomo	919	},{
428	giacomo	920	.name = "IODATA GV-BCTV3/PCI",
		921	.video_inputs = 3,
		922	.audio_inputs = 1,
		923	.tuner = 0,
		924	.svhs = 2,
		925	.gpiomask = 0x010f00,
		926	.muxsel = {2, 3, 0, 0},
		927	.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
		928	.no_msp34xx = 1,
		929	.pll = PLL_28,
		930	.tuner_type = TUNER_ALPS_TSHC6_NTSC,
		931	.audio_hook = gvbctv3pci_audio,
170	giacomo	932	},{
428	giacomo	933	.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
		934	.video_inputs = 5,
		935	.audio_inputs = 1,
		936	.tuner = 0,
		937	.svhs = 3,
		938	.gpiomask = 0xAA0000,
		939	.muxsel = { 2,3,1,1,-1 },
		940	.digital_mode = DIGITAL_MODE_CAMERA,
		941	.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
		942	.no_msp34xx = 1,
		943	.pll = PLL_28,
		944	.tuner_type = TUNER_PHILIPS_PAL_I,
		945	/* GPIO wiring: (different from Rev.4C !)
		946	GPIO17: U4.A0 (first hef4052bt)
		947	GPIO19: U4.A1
		948	GPIO20: U5.A1 (second hef4052bt)
		949	GPIO21: U4.nEN
		950	GPIO22: BT832 Reset Line
		951	GPIO23: A5,A0, U5,nEN
		952	Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
		953	*/
170	giacomo	954	},{
428	giacomo	955	.name = "Eagle Wireless Capricorn2 (bt878A)",
		956	.video_inputs = 4,
		957	.audio_inputs = 1,
		958	.tuner = 0,
		959	.svhs = 2,
		960	.gpiomask = 7,
		961	.muxsel = { 2, 0, 1, 1},
		962	.audiomux = { 0, 1, 2, 3, 4},
		963	.pll = PLL_28,
		964	.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
170	giacomo	965	},{
		966
		967	/* ---- card 0x34 ---------------------------------- */
428	giacomo	968	/* David H�rdeman <david@2gen.com> */
		969	.name = "Pinnacle PCTV Studio Pro",
		970	.video_inputs = 4,
		971	.audio_inputs = 1,
		972	.tuner = 0,
		973	.svhs = 3,
		974	.gpiomask = 0x03000F,
		975	.muxsel = { 2, 3, 1, 1},
		976	.audiomux = { 1, 0xd0001, 0, 0, 10},
		977	/* sound path (5 sources):
		978	MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
		979	0= ext. Audio IN
		980	1= from MUX2
		981	2= Mono TV sound from Tuner
		982	3= not connected
		983	MUX2 (mask 0x30000):
		984	0,2,3= from MSP34xx
		985	1= FM stereo Radio from Tuner */
		986	.needs_tvaudio = 1,
		987	.pll = PLL_28,
		988	.tuner_type = -1,
170	giacomo	989	},{
		990	/* Claas Langbehn <claas@bigfoot.com>,
		991	Sven Grothklags <sven@upb.de> */
428	giacomo	992	.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
		993	.video_inputs = 3,
		994	.audio_inputs = 3,
		995	.tuner = 0,
		996	.svhs = 2,
		997	.gpiomask = 0x1c,
		998	.muxsel = { 2, 3, 1, 1},
		999	.audiomux = { 0, 0, 0x10, 8, 4 },
		1000	.needs_tvaudio = 1,
		1001	.pll = PLL_28,
		1002	.tuner_type = TUNER_PHILIPS_PAL_I,
		1003	.has_radio = 1,
170	giacomo	1004	},{
428	giacomo	1005	/* Tim R�stermundt <rosterm@uni-muenster.de>
170	giacomo	1006	in de.comp.os.unix.linux.hardware:
		1007	options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
		1008	audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
		1009	options tuner type=5 */
428	giacomo	1010	.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
		1011	.video_inputs = 4,
		1012	.audio_inputs = 1,
		1013	.tuner = 0,
		1014	.svhs = 2,
		1015	.gpiomask = 0x18e0,
		1016	.muxsel = { 2, 3, 1, 1},
		1017	.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
		1018	/* For cards with tda9820/tda9821:
		1019	0x0000: Tuner normal stereo
170	giacomo	1020	0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
		1021	0x0880: Tuner A2 stereo */
428	giacomo	1022	.pll = PLL_28,
		1023	.tuner_type = -1,
170	giacomo	1024	},{
		1025	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		1026	old Easy TV BT848 version (model CPH031) */
428	giacomo	1027	.name = "Askey CPH031/ BESTBUY Easy TV",
		1028	.video_inputs = 4,
		1029	.audio_inputs = 1,
		1030	.tuner = 0,
		1031	.svhs = 2,
		1032	.gpiomask = 0xF,
		1033	.muxsel = { 2, 3, 1, 0},
		1034	.audiomux = { 2, 0, 0, 0, 10},
		1035	.needs_tvaudio = 0,
		1036	.pll = PLL_28,
		1037	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	1038	},{
		1039
		1040	/* ---- card 0x38 ---------------------------------- */
		1041	/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
428	giacomo	1042	.name = "Lifeview FlyVideo 98FM LR50",
		1043	.video_inputs = 4,
		1044	.audio_inputs = 3,
		1045	.tuner = 0,
		1046	.svhs = 2,
		1047	.gpiomask = 0x1800,
		1048	.muxsel = { 2, 3, 1, 1},
		1049	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		1050	.pll = PLL_28,
		1051	.tuner_type = 5,
170	giacomo	1052	},{
		1053	/* This is the ultimate cheapo capture card
		1054	* just a BT848A on a small PCB!
		1055	* Steve Hosgood <steve@equiinet.com> */
428	giacomo	1056	.name = "GrandTec 'Grand Video Capture' (Bt848)",
		1057	.video_inputs = 2,
		1058	.audio_inputs = 0,
		1059	.tuner = -1,
		1060	.svhs = 1,
		1061	.gpiomask = 0,
		1062	.muxsel = { 3, 1 },
		1063	.audiomux = { 0 },
		1064	.needs_tvaudio = 0,
		1065	.no_msp34xx = 1,
		1066	.pll = PLL_35,
		1067	.tuner_type = -1,
170	giacomo	1068	},{
		1069	/* Daniel Herrington <daniel.herrington@home.com> */
428	giacomo	1070	.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
		1071	.video_inputs = 3,
		1072	.audio_inputs = 1,
		1073	.tuner = 0,
		1074	.svhs = 2,
		1075	.gpiomask = 0xe00,
		1076	.muxsel = { 2, 3, 1, 1},
		1077	.audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
		1078	.needs_tvaudio = 1,
		1079	.pll = PLL_28,
		1080	.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
170	giacomo	1081	},{
		1082	/* Matti Mottus <mottus@physic.ut.ee> */
428	giacomo	1083	.name = "Askey CPH03x TV Capturer",
		1084	.video_inputs = 4,
		1085	.audio_inputs = 1,
		1086	.tuner = 0,
		1087	.svhs = 2,
		1088	.gpiomask = 0x03000F,
		1089	.muxsel = { 2, 3, 1, 0},
		1090	.audiomux = { 2,0,0,0,1 },
		1091	.pll = PLL_28,
		1092	.tuner_type = 0,
170	giacomo	1093	},{
		1094
		1095	/* ---- card 0x3c ---------------------------------- */
		1096	/* Philip Blundell <philb@gnu.org> */
428	giacomo	1097	.name = "Modular Technology MM100PCTV",
		1098	.video_inputs = 2,
		1099	.audio_inputs = 2,
		1100	.tuner = 0,
		1101	.svhs = -1,
		1102	.gpiomask = 11,
		1103	.muxsel = { 2, 3, 1, 1},
		1104	.audiomux = { 2, 0, 0, 1, 8},
		1105	.pll = PLL_35,
		1106	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	1107
		1108	},{
		1109	/* Adrian Cox <adrian@humboldt.co.uk */
428	giacomo	1110	.name = "AG Electronics GMV1",
		1111	.video_inputs = 2,
		1112	.audio_inputs = 0,
		1113	.tuner = -1,
		1114	.svhs = 1,
		1115	.gpiomask = 0xF,
		1116	.muxsel = { 2, 2},
		1117	.audiomux = { },
		1118	.no_msp34xx = 1,
		1119	.needs_tvaudio = 0,
		1120	.pll = PLL_28,
		1121	.tuner_type = -1,
170	giacomo	1122	},{
		1123	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		1124	new Easy TV BT878 version (model CPH061)
		1125	special thanks to Informatica Mieres for providing the card */
428	giacomo	1126	.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
		1127	.video_inputs = 3,
		1128	.audio_inputs = 2,
		1129	.tuner = 0,
		1130	.svhs = 2,
		1131	.gpiomask = 0xFF,
		1132	.muxsel = { 2, 3, 1, 0},
		1133	.audiomux = { 1, 0, 4, 4, 9},
		1134	.needs_tvaudio = 0,
		1135	.pll = PLL_28,
		1136	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	1137	},{
		1138	/* Lukas Gebauer <geby@volny.cz> */
428	giacomo	1139	.name = "ATI TV-Wonder",
		1140	.video_inputs = 3,
		1141	.audio_inputs = 1,
		1142	.tuner = 0,
		1143	.svhs = 2,
		1144	.gpiomask = 0xf03f,
		1145	.muxsel = { 2, 3, 1, 0 },
		1146	.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
		1147	.pll = PLL_28,
		1148	.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
170	giacomo	1149	},{
		1150
		1151	/* ---- card 0x40 ---------------------------------- */
		1152	/* Lukas Gebauer <geby@volny.cz> */
428	giacomo	1153	.name = "ATI TV-Wonder VE",
		1154	.video_inputs = 2,
		1155	.audio_inputs = 1,
		1156	.tuner = 0,
		1157	.svhs = -1,
		1158	.gpiomask = 1,
		1159	.muxsel = { 2, 3, 0, 1},
		1160	.audiomux = { 0, 0, 1, 0, 0},
		1161	.no_msp34xx = 1,
		1162	.pll = PLL_28,
		1163	.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
170	giacomo	1164	},{
		1165	/* DeeJay <deejay@westel900.net (2000S) */
428	giacomo	1166	.name = "Lifeview FlyVideo 2000S LR90",
		1167	.video_inputs = 3,
		1168	.audio_inputs = 3,
		1169	.tuner = 0,
		1170	.svhs = 2,
		1171	.gpiomask = 0x18e0,
		1172	.muxsel = { 2, 3, 0, 1},
170	giacomo	1173	/* Radio changed from 1e80 to 0x800 to make
428	giacomo	1174	FlyVideo2000S in .hu happy (gm)*/
170	giacomo	1175	/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
428	giacomo	1176	.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
		1177	.audio_hook = fv2000s_audio,
		1178	.no_msp34xx = 1,
		1179	.no_tda9875 = 1,
		1180	.needs_tvaudio = 1,
		1181	.pll = PLL_28,
		1182	.tuner_type = 5,
170	giacomo	1183	},{
428	giacomo	1184	.name = "Terratec TValueRadio",
		1185	.video_inputs = 3,
		1186	.audio_inputs = 1,
		1187	.tuner = 0,
		1188	.svhs = 2,
		1189	.gpiomask = 0xffff00,
		1190	.muxsel = { 2, 3, 1, 1},
		1191	.audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
		1192	.needs_tvaudio = 1,
		1193	.pll = PLL_28,
		1194	.tuner_type = TUNER_PHILIPS_PAL,
		1195	.has_radio = 1,
170	giacomo	1196	},{
		1197	/* TANAKA Kei <peg00625@nifty.com> */
428	giacomo	1198	.name = "IODATA GV-BCTV4/PCI",
		1199	.video_inputs = 3,
		1200	.audio_inputs = 1,
		1201	.tuner = 0,
		1202	.svhs = 2,
		1203	.gpiomask = 0x010f00,
		1204	.muxsel = {2, 3, 0, 0},
		1205	.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
		1206	.no_msp34xx = 1,
		1207	.pll = PLL_28,
		1208	.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
		1209	.audio_hook = gvbctv3pci_audio,
170	giacomo	1210	},{
		1211
		1212	/* ---- card 0x44 ---------------------------------- */
428	giacomo	1213	.name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
170	giacomo	1214	// try "insmod msp3400 simple=0" if you have
		1215	// sound problems with this card.
428	giacomo	1216	.video_inputs = 4,
		1217	.audio_inputs = 1,
		1218	.tuner = 0,
		1219	.svhs = -1,
		1220	.gpiomask = 0x4f8a00,
170	giacomo	1221	// 0x100000: 1=MSP enabled (0=disable again)
		1222	// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
428	giacomo	1223	.audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
170	giacomo	1224	// tvtuner, radio, external,internal, mute, stereo
		1225	/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
428	giacomo	1226	.muxsel = { 2, 3 ,0 ,1},
		1227	.tuner_type = TUNER_MT2032,
		1228	.pll = PLL_28,
		1229	.has_radio = 1,
170	giacomo	1230	},{
		1231	/* Philip Blundell <pb@nexus.co.uk> */
428	giacomo	1232	.name = "Active Imaging AIMMS",
		1233	.video_inputs = 1,
		1234	.audio_inputs = 0,
		1235	.tuner = -1,
		1236	.tuner_type = -1,
		1237	.pll = PLL_28,
		1238	.muxsel = { 2 },
		1239	.gpiomask = 0
170	giacomo	1240	},{
		1241	/* Tomasz Pyra <hellfire@sedez.iq.pl> */
428	giacomo	1242	.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
		1243	.video_inputs = 3,
		1244	.audio_inputs = 4,
		1245	.tuner = 0,
		1246	.svhs = 2,
		1247	.gpiomask = 15,
		1248	.muxsel = { 2, 3, 1, 1},
		1249	.audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
		1250	.needs_tvaudio = 1,
		1251	.pll = PLL_28,
		1252	.tuner_type = 25,
		1253	/* GPIO wiring:
		1254	GPIO0: U4.A0 (hef4052bt)
		1255	GPIO1: U4.A1
		1256	GPIO2: U4.A1 (second hef4052bt)
		1257	GPIO3: U4.nEN, U5.A0, A5.nEN
		1258	GPIO8-15: vrd866b ?
		1259	*/
170	giacomo	1260	},{
428	giacomo	1261	.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
		1262	.video_inputs = 4,
		1263	.audio_inputs = 0,
		1264	.tuner = -1,
		1265	.svhs = 2,
		1266	.muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
		1267	.pll = PLL_28,
		1268	.no_msp34xx = 1,
170	giacomo	1269	},{
		1270
		1271	/* ---- card 0x48 ---------------------------------- */
		1272	/* Dariusz Kowalewski <darekk@automex.pl> */
428	giacomo	1273	.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
		1274	.video_inputs = 4,
		1275	.audio_inputs = 1,
		1276	.tuner = 0,
		1277	.svhs = 2,
		1278	.gpiomask = 0x3f,
		1279	.muxsel = { 2, 3, 1, 1 },
		1280	.audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
		1281	.needs_tvaudio = 1,
		1282	.no_msp34xx = 1,
		1283	.no_tda9875 = 1,
		1284	.pll = PLL_28,
		1285	.tuner_type = 5,
		1286	.audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
		1287	.has_radio = 1, // Note: not all cards have radio
		1288	/* GPIO wiring:
		1289	GPIO0: A0 hef4052
		1290	GPIO1: A1 hef4052
		1291	GPIO3: nEN hef4052
		1292	GPIO8-15: vrd866b
		1293	GPIO20,22,23: R30,R29,R28
		1294	*/
170	giacomo	1295	},{
		1296	/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
		1297	/* you must jumper JP5 for the card to work */
428	giacomo	1298	.name = "Sensoray 311",
		1299	.video_inputs = 5,
		1300	.audio_inputs = 0,
		1301	.tuner = -1,
		1302	.svhs = 4,
		1303	.gpiomask = 0,
		1304	.muxsel = { 2, 3, 1, 0, 0},
		1305	.audiomux = { 0 },
		1306	.needs_tvaudio = 0,
		1307	.tuner_type = -1,
170	giacomo	1308	},{
		1309	/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
428	giacomo	1310	.name = "RemoteVision MX (RV605)",
		1311	.video_inputs = 16,
		1312	.audio_inputs = 0,
		1313	.tuner = -1,
		1314	.svhs = -1,
		1315	.gpiomask = 0x00,
		1316	.gpiomask2 = 0x07ff,
		1317	.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
170	giacomo	1318	0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
428	giacomo	1319	.no_msp34xx = 1,
		1320	.no_tda9875 = 1,
		1321	.tuner_type = -1,
		1322	.muxsel_hook = rv605_muxsel,
170	giacomo	1323	},{
428	giacomo	1324	.name = "Powercolor MTV878/ MTV878R/ MTV878F",
		1325	.video_inputs = 3,
		1326	.audio_inputs = 2,
		1327	.tuner = 0,
		1328	.svhs = 2,
		1329	.gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
		1330	.muxsel = { 2, 1, 1, },
		1331	.audiomux = { 0, 1, 2, 2, 4 },
		1332	.needs_tvaudio = 0,
		1333	.tuner_type = TUNER_PHILIPS_PAL,
		1334	.pll = PLL_28,
		1335	.has_radio = 1,
170	giacomo	1336	},{
		1337
		1338	/* ---- card 0x4c ---------------------------------- */
		1339	/* Masaki Suzuki <masaki@btree.org> */
428	giacomo	1340	.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
		1341	.video_inputs = 3,
		1342	.audio_inputs = 1,
		1343	.tuner = 0,
		1344	.svhs = 2,
		1345	.gpiomask = 0x140007,
		1346	.muxsel = { 2, 3, 1, 1 },
		1347	.audiomux = { 0, 1, 2, 3, 4, 0 },
		1348	.tuner_type = TUNER_PHILIPS_NTSC,
		1349	.audio_hook = windvr_audio,
170	giacomo	1350	},{
428	giacomo	1351	.name = "GrandTec Multi Capture Card (Bt878)",
		1352	.video_inputs = 4,
		1353	.audio_inputs = 0,
		1354	.tuner = -1,
		1355	.svhs = -1,
		1356	.gpiomask = 0,
		1357	.muxsel = { 2, 3, 1, 0 },
		1358	.audiomux = { 0 },
		1359	.needs_tvaudio = 0,
		1360	.no_msp34xx = 1,
		1361	.pll = PLL_28,
		1362	.tuner_type = -1,
170	giacomo	1363	},{
428	giacomo	1364	.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
		1365	.video_inputs = 4,
		1366	.audio_inputs = 3,
		1367	.tuner = 0,
		1368	.svhs = 2,
		1369	.gpiomask = 7,
		1370	.muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
		1371	.audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
		1372	// This card lacks external Audio In, so we mute it on Ext. & Int.
		1373	// The PCB can take a sbx1637/sbx1673, wiring unknown.
		1374	// This card lacks PCI subsystem ID, sigh.
		1375	// audiomux=1: lower volume, 2+3: mute
		1376	// btwincap uses 0x80000/0x80003
		1377	.needs_tvaudio = 0,
		1378	.no_msp34xx = 1,
		1379	.pll = PLL_28,
		1380	.tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
		1381	// radio signal strength indicators work fine.
		1382	.has_radio = 1,
		1383	/* GPIO Info:
		1384	GPIO0,1: HEF4052 A0,A1
		1385	GPIO2: HEF4052 nENABLE
		1386	GPIO3-7: n.c.
		1387	GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
		1388	GPIO14,15: ??
		1389	GPIO16-21: n.c.
		1390	GPIO22,23: ??
		1391	?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
170	giacomo	1392	},{
428	giacomo	1393	/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
		1394	.name = "DSP Design TCVIDEO",
		1395	.video_inputs = 4,
		1396	.svhs = -1,
		1397	.muxsel = { 2, 3, 1, 0},
		1398	.pll = PLL_28,
		1399	.tuner_type = -1,
170	giacomo	1400	},{
428	giacomo	1401
		1402	/* ---- card 0x50 ---------------------------------- */
		1403	.name = "Hauppauge WinTV PVR",
		1404	.video_inputs = 4,
		1405	.audio_inputs = 1,
		1406	.tuner = 0,
		1407	.svhs = 2,
		1408	.muxsel = { 2, 0, 1, 1},
		1409	.needs_tvaudio = 1,
		1410	.pll = PLL_28,
		1411	.tuner_type = -1,
		1412
		1413	.gpiomask = 7,
		1414	.audiomux = {7},
170	giacomo	1415	},{
428	giacomo	1416	.name = "IODATA GV-BCTV5/PCI",
		1417	.video_inputs = 3,
		1418	.audio_inputs = 1,
		1419	.tuner = 0,
		1420	.svhs = 2,
		1421	.gpiomask = 0x0f0f80,
		1422	.muxsel = {2, 3, 1, 0},
		1423	.audiomux = {0x030000, 0x010000, 0x030000, 0, 0x020000, 0},
		1424	.no_msp34xx = 1,
		1425	.pll = PLL_28,
		1426	.tuner_type = TUNER_PHILIPS_NTSC_M,
		1427	.audio_hook = gvbctv3pci_audio,
		1428	.has_radio = 1,
170	giacomo	1429	},{
428	giacomo	1430	.name = "Osprey 100/150 (878)", /* 0x1(2\|3)-45C6-C1 */
		1431	.video_inputs = 4, /* id-inputs-clock */
		1432	.audio_inputs = 0,
		1433	.tuner = -1,
		1434	.svhs = 3,
		1435	.muxsel = { 3, 2, 0, 1 },
		1436	.pll = PLL_28,
		1437	.tuner_type = -1,
		1438	.no_msp34xx = 1,
		1439	.no_tda9875 = 1,
		1440	.no_tda7432 = 1,
170	giacomo	1441	},{
428	giacomo	1442	.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
		1443	.video_inputs = 3,
		1444	.audio_inputs = 0,
		1445	.tuner = -1,
		1446	.svhs = 2,
		1447	.muxsel = { 2, 3, 1 },
		1448	.pll = PLL_28,
		1449	.tuner_type = -1,
		1450	.no_msp34xx = 1,
		1451	.no_tda9875 = 1,
		1452	.no_tda7432 = 1,
170	giacomo	1453	},{
428	giacomo	1454
		1455	/* ---- card 0x54 ---------------------------------- */
		1456	.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
		1457	.video_inputs = 2,
		1458	.audio_inputs = 0,
		1459	.tuner = -1,
		1460	.svhs = 1,
		1461	.muxsel = { 3, 1 },
		1462	.pll = PLL_28,
		1463	.tuner_type = -1,
		1464	.no_msp34xx = 1,
		1465	.no_tda9875 = 1,
		1466	.no_tda7432 = 1,
170	giacomo	1467	},{
428	giacomo	1468	.name = "Osprey 101/151", /* 0x1(4\|5)-0004-C4 */
		1469	.video_inputs = 1,
		1470	.audio_inputs = 0,
		1471	.tuner = -1,
		1472	.svhs = -1,
		1473	.muxsel = { 0 },
		1474	.pll = PLL_28,
		1475	.tuner_type = -1,
		1476	.no_msp34xx = 1,
		1477	.no_tda9875 = 1,
		1478	.no_tda7432 = 1,
170	giacomo	1479	},{
428	giacomo	1480	.name = "Osprey 101/151 w/ svid", /* 0x(16\|17\|20)-00C4-C1 */
		1481	.video_inputs = 2,
		1482	.audio_inputs = 0,
		1483	.tuner = -1,
		1484	.svhs = 1,
		1485	.muxsel = { 0, 1 },
		1486	.pll = PLL_28,
		1487	.tuner_type = -1,
		1488	.no_msp34xx = 1,
		1489	.no_tda9875 = 1,
		1490	.no_tda7432 = 1,
170	giacomo	1491	},{
428	giacomo	1492	.name = "Osprey 200/201/250/251", /* 0x1(8\|9\|E\|F)-0004-C4 */
		1493	.video_inputs = 1,
		1494	.audio_inputs = 1,
		1495	.tuner = -1,
		1496	.svhs = -1,
		1497	.muxsel = { 0 },
		1498	.pll = PLL_28,
		1499	.tuner_type = -1,
		1500	.no_msp34xx = 1,
		1501	.no_tda9875 = 1,
		1502	.no_tda7432 = 1,
170	giacomo	1503	},{
428	giacomo	1504
		1505	/* ---- card 0x58 ---------------------------------- */
		1506	.name = "Osprey 200/250", /* 0x1(A\|B)-00C4-C1 */
		1507	.video_inputs = 2,
		1508	.audio_inputs = 1,
		1509	.tuner = -1,
		1510	.svhs = 1,
		1511	.muxsel = { 0, 1 },
		1512	.pll = PLL_28,
		1513	.tuner_type = -1,
		1514	.no_msp34xx = 1,
		1515	.no_tda9875 = 1,
		1516	.no_tda7432 = 1,
		1517	},{
		1518	.name = "Osprey 210/220", /* 0x1(A\|B)-04C0-C1 */
		1519	.video_inputs = 2,
		1520	.audio_inputs = 1,
		1521	.tuner = -1,
		1522	.svhs = 1,
		1523	.muxsel = { 2, 3 },
		1524	.pll = PLL_28,
		1525	.tuner_type = -1,
		1526	.no_msp34xx = 1,
		1527	.no_tda9875 = 1,
		1528	.no_tda7432 = 1,
		1529	},{
		1530	.name = "Osprey 500", /* 500 */
		1531	.video_inputs = 2,
		1532	.audio_inputs = 1,
		1533	.tuner = -1,
		1534	.svhs = 1,
		1535	.muxsel = { 2, 3 },
		1536	.pll = PLL_28,
		1537	.tuner_type = -1,
		1538	.no_msp34xx = 1,
		1539	.no_tda9875 = 1,
		1540	.no_tda7432 = 1,
		1541	},{
		1542	.name = "Osprey 540", /* 540 */
		1543	.video_inputs = 4,
		1544	.audio_inputs = 1,
		1545	.tuner = -1,
		1546	#if 0 /* TODO ... */
		1547	.svhs = OSPREY540_SVID_ANALOG,
		1548	.muxsel = { [OSPREY540_COMP_ANALOG] = 2,
		1549	[OSPREY540_SVID_ANALOG] = 3, },
		1550	#endif
		1551	.pll = PLL_28,
		1552	.tuner_type = -1,
		1553	.no_msp34xx = 1,
		1554	.no_tda9875 = 1,
		1555	.no_tda7432 = 1,
		1556	#if 0 /* TODO ... */
		1557	.muxsel_hook = osprey_540_muxsel,
		1558	.picture_hook = osprey_540_set_picture,
		1559	#endif
		1560	},{
		1561
		1562	/* ---- card 0x5C ---------------------------------- */
		1563	.name = "Osprey 2000", /* 2000 */
		1564	.video_inputs = 2,
		1565	.audio_inputs = 1,
		1566	.tuner = -1,
		1567	.svhs = 1,
		1568	.muxsel = { 2, 3 },
		1569	.pll = PLL_28,
		1570	.tuner_type = -1,
		1571	.no_msp34xx = 1,
		1572	.no_tda9875 = 1,
		1573	.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
		1574	},{
		1575	/* M G Berberich <berberic@forwiss.uni-passau.de> */
		1576	.name = "IDS Eagle",
		1577	.video_inputs = 4,
		1578	.audio_inputs = 0,
		1579	.tuner = -1,
		1580	.tuner_type = -1,
		1581	.svhs = -1,
		1582	.gpiomask = 0,
		1583	.muxsel = { 0, 1, 2, 3 },
		1584	.muxsel_hook = eagle_muxsel,
		1585	.no_msp34xx = 1,
		1586	.no_tda9875 = 1,
		1587	.pll = PLL_28,
		1588	},{
		1589	.name = "Pinnacle PCTV Sat",
		1590	.video_inputs = 2,
		1591	.audio_inputs = 0,
		1592	.svhs = 1,
		1593	.tuner = -1,
		1594	.tuner_type = -1,
		1595	.no_msp34xx = 1,
		1596	.no_tda9875 = 1,
		1597	.no_tda7432 = 1,
		1598	.gpiomask = 0x01,
		1599	.audiomux = { 0, 0, 0, 0, 1 },
		1600	.muxsel = { 3, 0, 1, 2},
		1601	.needs_tvaudio = 0,
		1602	.pll = PLL_28,
		1603	},{
		1604	.name = "Formac ProTV II (bt878)",
		1605	.video_inputs = 4,
		1606	.audio_inputs = 1,
		1607	.tuner = 0,
		1608	.svhs = 3,
		1609	.gpiomask = 2,
		1610	// TV, Comp1, Composite over SVID con, SVID
		1611	.muxsel = { 2, 3, 1, 1},
		1612	.audiomux = { 2, 2, 0, 0, 0 },
		1613	.pll = PLL_28,
		1614	.has_radio = 1,
		1615	.tuner_type = TUNER_PHILIPS_PAL,
		1616	/* sound routing:
		1617	GPIO=0x00,0x01,0x03: mute (?)
		1618	0x02: both TV and radio (tuner: FM1216/I)
		1619	The card has onboard audio connectors labeled "cdrom" and "board",
		1620	not soldered here, though unknown wiring.
		1621	Card lacks: external audio in, pci subsystem id.
		1622	*/
		1623	},{
		1624
		1625	/* ---- card 0x60 ---------------------------------- */
		1626	.name = "MachTV",
		1627	.video_inputs = 3,
		1628	.audio_inputs = 1,
		1629	.tuner = 0,
		1630	.svhs = -1,
		1631	.gpiomask = 7,
		1632	.muxsel = { 2, 3, 1, 1},
		1633	.audiomux = { 0, 1, 2, 3, 4},
		1634	.needs_tvaudio = 1,
		1635	.tuner_type = 5,
		1636	.pll = 1,
		1637	},{
		1638	.name = "Euresys Picolo",
		1639	.video_inputs = 3,
		1640	.audio_inputs = 0,
		1641	.tuner = -1,
		1642	.svhs = 2,
		1643	.gpiomask = 0,
		1644	.no_msp34xx = 1,
		1645	.no_tda9875 = 1,
		1646	.no_tda7432 = 1,
		1647	.muxsel = { 2, 0, 1},
		1648	.pll = PLL_28,
		1649	},{
		1650	/* Luc Van Hoeylandt <luc@e-magic.be> */
		1651	.name = "ProVideo PV150", /* 0x4f */
		1652	.video_inputs = 2,
		1653	.audio_inputs = 0,
		1654	.tuner = -1,
		1655	.svhs = -1,
		1656	.gpiomask = 0,
		1657	.muxsel = { 2, 3 },
		1658	.audiomux = { 0 },
		1659	.needs_tvaudio = 0,
		1660	.no_msp34xx = 1,
		1661	.pll = PLL_28,
		1662	.tuner_type = -1,
		1663	},{
		1664	/* Hiroshi Takekawa <sian@big.or.jp> */
		1665	/* This card lacks subsystem ID */
		1666	.name = "AD-TVK503", /* 0x63 */
		1667	.video_inputs = 4,
		1668	.audio_inputs = 1,
		1669	.tuner = 0,
		1670	.svhs = 2,
		1671	.gpiomask = 0x001e8007,
		1672	.muxsel = { 2, 3, 1, 0 },
		1673	/* Tuner, Radio, external, internal, off, on */
		1674	.audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
		1675	.needs_tvaudio = 0,
		1676	.no_msp34xx = 1,
		1677	.pll = PLL_28,
		1678	.tuner_type = 2,
		1679	.audio_hook = adtvk503_audio,
		1680	},{
		1681
		1682	/* ---- card 0x64 ---------------------------------- */
		1683	.name = "Hercules Smart TV Stereo",
		1684	.video_inputs = 4,
		1685	.audio_inputs = 1,
		1686	.tuner = 0,
		1687	.svhs = 2,
		1688	.gpiomask = 0x00,
		1689	.muxsel = { 2, 3, 1, 1 },
		1690	.needs_tvaudio = 1,
		1691	.no_msp34xx = 1,
		1692	.pll = PLL_28,
		1693	.tuner_type = 5,
		1694	/* Notes:
		1695	- card lacks subsystem ID
		1696	- stereo variant w/ daughter board with tda9874a @0xb0
		1697	- Audio Routing:
		1698	always from tda9874 independent of GPIO (?)
		1699	external line in: unknown
		1700	- Other chips: em78p156elp @ 0x96 (probably IR remote control)
		1701	hef4053 (instead 4052) for unknown function
		1702	*/
		1703	},{
		1704	.name = "Pace TV & Radio Card",
		1705	.video_inputs = 4,
		1706	.audio_inputs = 1,
		1707	.tuner = 0,
		1708	.svhs = 2,
		1709	.muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
		1710	.gpiomask = 0,
		1711	.no_tda9875 = 1,
		1712	.no_tda7432 = 1,
		1713	.tuner_type = 1,
		1714	.has_radio = 1,
		1715	.pll = PLL_28,
		1716	/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
		1717	only internal line out: (4pin header) RGGL
		1718	Radio must be decoded by msp3410d (not routed through)*/
		1719	// .digital_mode = DIGITAL_MODE_CAMERA, // todo!
		1720	},{
		1721	/* Chris Willing <chris@vislab.usyd.edu.au> */
		1722	.name = "IVC-200",
		1723	.video_inputs = 1,
		1724	.audio_inputs = 0,
		1725	.tuner = -1,
		1726	.tuner_type = -1,
		1727	.svhs = -1,
		1728	.gpiomask = 0xdf,
		1729	.muxsel = { 2 },
		1730	.pll = PLL_28,
		1731	},{
		1732	.name = "Grand X-Guard / Trust 814PCI",
		1733	.video_inputs = 16,
		1734	.audio_inputs = 0,
		1735	.tuner = -1,
		1736	.svhs = -1,
		1737	.tuner_type = 4,
		1738	.gpiomask2 = 0xff,
		1739	.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
		1740	.muxsel_hook = xguard_muxsel,
		1741	.no_msp34xx = 1,
		1742	.no_tda9875 = 1,
		1743	.no_tda7432 = 1,
		1744	.pll = PLL_28,
		1745	},{
		1746
		1747	/* ---- card 0x68 ---------------------------------- */
		1748	.name = "Nebula Electronics DigiTV",
		1749	.svhs = -1,
		1750	.muxsel = { 2, 3, 1, 0},
		1751	.no_msp34xx = 1,
		1752	.no_tda9875 = 1,
		1753	.no_tda7432 = 1,
		1754	.pll = PLL_28,
		1755	.tuner_type = -1,
		1756	.no_video = 1,
		1757	},{
		1758	/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
		1759	.name = "ProVideo PV143",
		1760	.video_inputs = 4,
		1761	.audio_inputs = 0,
		1762	.tuner = -1,
		1763	.svhs = -1,
		1764	.gpiomask = 0,
		1765	.muxsel = { 2, 3, 1, 0 },
		1766	.audiomux = { 0 },
		1767	.needs_tvaudio = 0,
		1768	.no_msp34xx = 1,
		1769	.pll = PLL_28,
		1770	.tuner_type = -1,
		1771	},{
		1772	/* M.Klahr@phytec.de */
		1773	.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
		1774	.video_inputs = 4,
		1775	.audio_inputs = 0,
		1776	.tuner = -1, /* card has no tuner */
		1777	.svhs = 3,
		1778	.gpiomask = 0x00,
		1779	.muxsel = { 2, 3, 1, 0},
		1780	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1781	.needs_tvaudio = 1,
		1782	.pll = PLL_28,
		1783	.tuner_type = -1,
		1784	},{
		1785	.name = "PHYTEC VD-009-X1 Combi (bt878)",
		1786	.video_inputs = 4,
		1787	.audio_inputs = 0,
		1788	.tuner = -1, /* card has no tuner */
		1789	.svhs = 3,
		1790	.gpiomask = 0x00,
		1791	.muxsel = { 2, 3, 1, 1},
		1792	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1793	.needs_tvaudio = 1,
		1794	.pll = PLL_28,
		1795	.tuner_type = -1,
		1796	},{
		1797
		1798	/* ---- card 0x6c ---------------------------------- */
		1799	.name = "PHYTEC VD-009 MiniDIN (bt878)",
		1800	.video_inputs = 10,
		1801	.audio_inputs = 0,
		1802	.tuner = -1, /* card has no tuner */
		1803	.svhs = 9,
		1804	.gpiomask = 0x00,
		1805	.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
		1806	via the upper nibble of muxsel. here: used for
		1807	xternal video-mux */
		1808	.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
		1809	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1810	.needs_tvaudio = 1,
		1811	.pll = PLL_28,
		1812	.tuner_type = -1,
		1813	},{
		1814	.name = "PHYTEC VD-009 Combi (bt878)",
		1815	.video_inputs = 10,
		1816	.audio_inputs = 0,
		1817	.tuner = -1, /* card has no tuner */
		1818	.svhs = 9,
		1819	.gpiomask = 0x00,
		1820	.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
		1821	via the upper nibble of muxsel. here: used for
		1822	xternal video-mux */
		1823	.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
		1824	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1825	.needs_tvaudio = 1,
		1826	.pll = PLL_28,
		1827	.tuner_type = -1,
		1828	},{
		1829	.name = "IVC-100",
		1830	.video_inputs = 4,
		1831	.audio_inputs = 0,
		1832	.tuner = -1,
		1833	.tuner_type = -1,
		1834	.svhs = -1,
		1835	.gpiomask = 0xdf,
		1836	.muxsel = { 2, 3, 1, 0 },
		1837	.pll = PLL_28,
		1838	},{
		1839	/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
		1840	.name = "IVC-120G",
		1841	.video_inputs = 16,
		1842	.audio_inputs = 0, /* card has no audio */
		1843	.tuner = -1, /* card has no tuner */
		1844	.tuner_type = -1,
		1845	.svhs = -1, /* card has no svhs */
		1846	.needs_tvaudio = 0,
		1847	.no_msp34xx = 1,
		1848	.no_tda9875 = 1,
		1849	.no_tda7432 = 1,
		1850	.gpiomask = 0x00,
		1851	.muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
		1852	0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
		1853	.muxsel_hook = ivc120_muxsel,
		1854	.pll = PLL_28,
170	giacomo	1855	}};
		1856
428	giacomo	1857	const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
170	giacomo	1858
		1859	/* ----------------------------------------------------------------------- */
		1860
		1861	static unsigned char eeprom_data[256];
		1862
		1863	/*
		1864	* identify card
		1865	*/
428	giacomo	1866	void __devinit bttv_idcard(struct bttv *btv)
170	giacomo	1867	{
		1868	unsigned int gpiobits;
		1869	int i,type;
		1870	unsigned short tmp;
		1871
		1872	/* read PCI subsystem ID */
428	giacomo	1873	pci_read_config_word(btv->dev, PCI_SUBSYSTEM_ID, &tmp);
170	giacomo	1874	btv->cardid = tmp << 16;
428	giacomo	1875	pci_read_config_word(btv->dev, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
170	giacomo	1876	btv->cardid \|= tmp;
		1877
		1878	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
		1879	/* look for the card */
		1880	for (type = -1, i = 0; cards[i].id != 0; i++)
		1881	if (cards[i].id == btv->cardid)
		1882	type = i;
		1883
		1884	if (type != -1) {
		1885	/* found it */
428	giacomo	1886	printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
		1887	"PCI subsystem ID is %04x:%04x\n",
170	giacomo	1888	btv->nr,cards[type].name,cards[type].cardnr,
428	giacomo	1889	btv->cardid & 0xffff,
		1890	(btv->cardid >> 16) & 0xffff);
170	giacomo	1891	btv->type = cards[type].cardnr;
		1892	} else {
		1893	/* 404 */
		1894	printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
428	giacomo	1895	btv->nr, btv->cardid & 0xffff,
		1896	(btv->cardid >> 16) & 0xffff);
		1897	printk(KERN_DEBUG "please mail id, board name and "
		1898	"the correct card= insmod option to kraxel@bytesex.org\n");
170	giacomo	1899	}
428	giacomo	1900	}
170	giacomo	1901
		1902	/* let the user override the autodetected type */
428	giacomo	1903	if (card[btv->nr] < bttv_num_tvcards)
170	giacomo	1904	btv->type=card[btv->nr];
		1905
		1906	/* print which card config we are using */
		1907	printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
428	giacomo	1908	bttv_tvcards[btv->type].name, btv->type,
		1909	card[btv->nr] < bttv_num_tvcards
		1910	? "insmod option" : "autodetected");
170	giacomo	1911
		1912	/* overwrite gpio stuff ?? */
428	giacomo	1913	if (UNSET == audioall && UNSET == audiomux[0])
170	giacomo	1914	return;
		1915
428	giacomo	1916	if (UNSET != audiomux[0]) {
170	giacomo	1917	gpiobits = 0;
		1918	for (i = 0; i < 5; i++) {
		1919	bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
		1920	gpiobits \|= audiomux[i];
		1921	}
		1922	} else {
		1923	gpiobits = audioall;
		1924	for (i = 0; i < 5; i++) {
		1925	bttv_tvcards[btv->type].audiomux[i] = audioall;
		1926	}
		1927	}
428	giacomo	1928	bttv_tvcards[btv->type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
		1929	printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
170	giacomo	1930	btv->nr,bttv_tvcards[btv->type].gpiomask);
		1931	for (i = 0; i < 5; i++) {
428	giacomo	1932	printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
170	giacomo	1933	}
428	giacomo	1934	printk("\n");
170	giacomo	1935	}
		1936
		1937	/*
		1938	* (most) board specific initialisations goes here
		1939	*/
		1940
428	giacomo	1941	/* Some Modular Technology cards have an eeprom, but no subsystem ID */
		1942	void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
		1943	{
		1944	int type = -1;
		1945
		1946	if (0 == strncmp(eeprom_data,"GET.MM20xPCTV",13))
		1947	type = BTTV_MODTEC_205;
		1948	else if (0 == strncmp(eeprom_data+20,"Picolo",7))
		1949	type = BTTV_EURESYS_PICOLO;
		1950	else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
		1951	type = BTTV_HAUPPAUGE; /* old bt848 */
		1952
		1953	if (-1 != type) {
		1954	btv->type = type;
		1955	printk("bttv%d: detected by eeprom: %s [card=%d]\n",
		1956	btv->nr, bttv_tvcards[btv->type].name, btv->type);
		1957	}
		1958	}
		1959
170	giacomo	1960	static void flyvideo_gpio(struct bttv *btv)
428	giacomo	1961	{
		1962	int gpio,outbits,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
170	giacomo	1963	int tuner=-1,ttype;
		1964
		1965	outbits = btread(BT848_GPIO_OUT_EN);
		1966	btwrite(0x00, BT848_GPIO_OUT_EN);
		1967	udelay(8); // without this we would see the 0x1800 mask
428	giacomo	1968	gpio=btread(BT848_GPIO_DATA);
170	giacomo	1969	btwrite(outbits, BT848_GPIO_OUT_EN);
		1970	// all cards provide GPIO info, some have an additional eeprom
428	giacomo	1971	// LR50: GPIO coding can be found lower right CP1 .. CP9
		1972	// CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
		1973	// GPIO14-12: n.c.
		1974	// LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
170	giacomo	1975
		1976	// lowest 3 bytes are remote control codes (no handshake needed)
428	giacomo	1977	// xxxFFF: No remote control chip soldered
		1978	// xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
		1979	// Note: Some bits are Audio_Mask !
		1980
170	giacomo	1981	ttype=(gpio&0x0f0000)>>16;
		1982	switch(ttype) {
428	giacomo	1983	case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
170	giacomo	1984	break;
428	giacomo	1985	case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
170	giacomo	1986	break;
428	giacomo	1987	case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
170	giacomo	1988	break;
428	giacomo	1989	case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
170	giacomo	1990	break;
428	giacomo	1991	case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
		1992	break;
170	giacomo	1993	default:
428	giacomo	1994	printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->nr);
170	giacomo	1995	}
428	giacomo	1996
		1997	has_remote = gpio & 0x800000;
		1998	has_radio = gpio & 0x400000;
		1999	// unknown 0x200000;
		2000	// unknown2 0x100000;
		2001	is_capture_only = !(gpio & 0x008000); //GPIO15
		2002	has_tda9820_tda9821 = !(gpio & 0x004000);
		2003	is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
		2004	// gpio & 0x001000 // output bit for audio routing
		2005
		2006	if(is_capture_only)
		2007	tuner=4; // No tuner present
		2008
		2009	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
		2010	btv->nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
		2011	printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
		2012	btv->nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
		2013	is_capture_only?"yes":"no ");
		2014
		2015	if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
		2016	btv->tuner_type = tuner;
		2017	btv->has_radio = has_radio;
		2018
		2019	// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
		2020	// LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
		2021	// Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
		2022	if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
		2023	//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
170	giacomo	2024	}
		2025
		2026	int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
		2027	14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
		2028	int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
428	giacomo	2029	1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
170	giacomo	2030
428	giacomo	2031	static void miro_pinnacle_gpio(struct bttv *btv)
170	giacomo	2032	{
428	giacomo	2033	int id,msp,gpio;
		2034	char *info;
170	giacomo	2035
428	giacomo	2036	btwrite(0,BT848_GPIO_OUT_EN);
		2037	gpio = btread(BT848_GPIO_DATA);
		2038	id = ((gpio>>10) & 63) -1;
		2039	msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
		2040	if (id < 32) {
170	giacomo	2041	btv->tuner_type = miro_tunermap[id];
428	giacomo	2042	if (0 == (gpio & 0x20)) {
170	giacomo	2043	btv->has_radio = 1;
		2044	if (!miro_fmtuner[id]) {
		2045	btv->has_matchbox = 1;
		2046	btv->mbox_we = (1<<6);
		2047	btv->mbox_most = (1<<7);
		2048	btv->mbox_clk = (1<<8);
		2049	btv->mbox_data = (1<<9);
		2050	btv->mbox_mask = (1<<6)\|(1<<7)\|(1<<8)\|(1<<9);
		2051	}
		2052	} else {
		2053	btv->has_radio = 0;
		2054	}
		2055	if (-1 != msp) {
		2056	if (btv->type == BTTV_MIRO)
		2057	btv->type = BTTV_MIROPRO;
		2058	if (btv->type == BTTV_PINNACLE)
		2059	btv->type = BTTV_PINNACLEPRO;
		2060	}
428	giacomo	2061	printk(KERN_INFO
		2062	"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
		2063	btv->nr, id+1, btv->tuner_type,
		2064	!btv->has_radio ? "no" :
		2065	(btv->has_matchbox ? "matchbox" : "fmtuner"),
		2066	(-1 == msp) ? "no" : "yes");
		2067	} else {
		2068	/* new cards with microtune tuner */
		2069	id = 63 - id;
		2070	btv->has_radio = 0;
		2071	switch (id) {
		2072	case 1:
		2073	info = "PAL / mono";
		2074	break;
		2075	case 2:
		2076	info = "PAL+SECAM / stereo";
		2077	btv->has_radio = 1;
		2078	break;
		2079	case 3:
		2080	info = "NTSC / stereo";
		2081	btv->has_radio = 1;
		2082	break;
		2083	case 4:
		2084	info = "PAL+SECAM / mono";
		2085	break;
		2086	case 5:
		2087	info = "NTSC / mono";
		2088	break;
		2089	case 6:
		2090	info = "NTSC / stereo";
		2091	break;
		2092	default:
		2093	info = "oops: unknown card";
		2094	break;
		2095	}
		2096	if (-1 != msp)
		2097	btv->type = BTTV_PINNACLEPRO;
		2098	printk(KERN_INFO
		2099	"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
		2100	btv->nr, id, info, btv->has_radio ? "yes" : "no");
		2101	btv->tuner_type = 33;
		2102	btv->pinnacle_id = id;
		2103	}
		2104	}
		2105
		2106	/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
		2107	#define LM1882_SYNC_DRIVE 0x200000L
		2108
		2109	static void init_ids_eagle(struct bttv *btv)
		2110	{
		2111	btwrite(0xFFFF37, BT848_GPIO_OUT_EN);
		2112	btwrite(0x000000, BT848_GPIO_REG_INP);
		2113
		2114	btwrite(0x200020, BT848_GPIO_DATA);
		2115
		2116	/* flash strobe inverter ?! */
		2117	btwrite(0x200024, BT848_GPIO_DATA);
		2118
		2119	/* switch sync drive off */
		2120	btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
		2121
		2122	/* set BT848 muxel to 2 */
		2123	btaor((2)<<5, ~(2<<5), BT848_IFORM);
		2124	}
		2125
		2126	/* Muxsel helper for the IDS Eagle.
		2127	* the eagles does not use the standard muxsel-bits but
		2128	* has its own multiplexer */
		2129	static void eagle_muxsel(struct bttv *btv, unsigned int input)
		2130	{
		2131	btaor((2)<<5, ~(3<<5), BT848_IFORM);
		2132	btaor((bttv_tvcards[btv->type].muxsel[input&7]&3),
		2133	~3, BT848_GPIO_DATA);
		2134
170	giacomo	2135	#if 0
428	giacomo	2136	/* svhs */
		2137	/* wake chroma ADC */
		2138	btand(~BT848_ADC_C_SLEEP, BT848_ADC);
		2139	/* set to YC video */
		2140	btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
		2141	btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
		2142	#else
		2143	/* composite */
		2144	/* set chroma ADC to sleep */
		2145	btor(BT848_ADC_C_SLEEP, BT848_ADC);
		2146	/* set to composite video */
		2147	btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
		2148	btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
170	giacomo	2149	#endif
428	giacomo	2150
		2151	/* switch sync drive off */
		2152	btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
		2153	}
		2154
		2155	/* ----------------------------------------------------------------------- */
		2156
		2157	void bttv_reset_audio(struct bttv *btv)
		2158	{
		2159	/*
		2160	* BT878A has a audio-reset register.
		2161	* 1. This register is an audio reset function but it is in
		2162	* function-0 (video capture) address space.
		2163	* 2. It is enough to do this once per power-up of the card.
		2164	* 3. There is a typo in the Conexant doc -- it is not at
		2165	* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
		2166	* --//Shrikumar 030609
		2167	*/
		2168	if (btv->id != 878)
		2169	return;
		2170
		2171	if (bttv_debug)
		2172	printk("bttv%d: BT878A ARESET\n",btv->nr);
		2173	btwrite((1<<7), 0x058);
		2174	udelay(10);
		2175	btwrite( 0, 0x058);
		2176	}
		2177
		2178	/* initialization part one -- before registering i2c bus */
		2179	void __devinit bttv_init_card1(struct bttv *btv)
		2180	{
		2181	switch (btv->type) {
		2182	case BTTV_HAUPPAUGE:
		2183	case BTTV_HAUPPAUGE878:
		2184	boot_msp34xx(btv,5);
		2185	break;
		2186	case BTTV_VOODOOTV_FM:
		2187	boot_msp34xx(btv,20);
		2188	break;
		2189	case BTTV_AVERMEDIA98:
		2190	boot_msp34xx(btv,11);
		2191	break;
		2192	case BTTV_HAUPPAUGEPVR:
		2193	pvr_boot(btv);
		2194	break;
170	giacomo	2195	}
428	giacomo	2196	}
170	giacomo	2197
428	giacomo	2198	/* initialization part two -- after registering i2c bus */
		2199	void __devinit bttv_init_card2(struct bttv *btv)
		2200	{
		2201	btv->tuner_type = -1;
		2202
		2203	if (BTTV_UNKNOWN == btv->type) {
		2204	bttv_readee(btv,eeprom_data,0xa0);
		2205	identify_by_eeprom(btv,eeprom_data);
		2206	}
		2207
		2208	switch (btv->type) {
		2209	case BTTV_MIRO:
		2210	case BTTV_MIROPRO:
		2211	case BTTV_PINNACLE:
		2212	case BTTV_PINNACLEPRO:
		2213	/* miro/pinnacle */
		2214	miro_pinnacle_gpio(btv);
		2215	break;
		2216	case BTTV_FLYVIDEO_98:
		2217	case BTTV_MAXI:
		2218	case BTTV_LIFE_FLYKIT:
		2219	case BTTV_FLYVIDEO:
		2220	case BTTV_TYPHOON_TVIEW:
		2221	case BTTV_CHRONOS_VS2:
		2222	case BTTV_FLYVIDEO_98FM:
		2223	case BTTV_FLYVIDEO2000:
		2224	case BTTV_FLYVIDEO98EZ:
		2225	case BTTV_CONFERENCETV:
		2226	case BTTV_LIFETEC_9415:
170	giacomo	2227	flyvideo_gpio(btv);
428	giacomo	2228	break;
		2229	case BTTV_HAUPPAUGE:
		2230	case BTTV_HAUPPAUGE878:
		2231	case BTTV_HAUPPAUGEPVR:
170	giacomo	2232	/* pick up some config infos from the eeprom */
		2233	bttv_readee(btv,eeprom_data,0xa0);
		2234	hauppauge_eeprom(btv);
428	giacomo	2235	break;
		2236	case BTTV_AVERMEDIA98:
		2237	case BTTV_AVPHONE98:
170	giacomo	2238	bttv_readee(btv,eeprom_data,0xa0);
		2239	avermedia_eeprom(btv);
428	giacomo	2240	break;
		2241	case BTTV_PXC200:
170	giacomo	2242	init_PXC200(btv);
428	giacomo	2243	break;
		2244	case BTTV_VHX:
170	giacomo	2245	btv->has_radio = 1;
		2246	btv->has_matchbox = 1;
		2247	btv->mbox_we = 0x20;
		2248	btv->mbox_most = 0;
		2249	btv->mbox_clk = 0x08;
		2250	btv->mbox_data = 0x10;
		2251	btv->mbox_mask = 0x38;
428	giacomo	2252	break;
		2253	case BTTV_VOBIS_BOOSTAR:
		2254	case BTTV_TERRATV:
		2255	terratec_active_radio_upgrade(btv);
		2256	break;
		2257	case BTTV_MAGICTVIEW061:
		2258	if (btv->cardid == 0x3002144f) {
170	giacomo	2259	btv->has_radio=1;
428	giacomo	2260	printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
170	giacomo	2261	}
428	giacomo	2262	break;
		2263	case BTTV_STB2:
		2264	if (btv->cardid == 0x3060121a) {
		2265	/* Fix up entry for 3DFX VoodooTV 100,
		2266	which is an OEM STB card variant. */
		2267	btv->has_radio=0;
		2268	btv->tuner_type=TUNER_TEMIC_NTSC;
		2269	}
		2270	break;
		2271	case BTTV_OSPREY1x0:
		2272	case BTTV_OSPREY1x0_848:
		2273	case BTTV_OSPREY101_848:
		2274	case BTTV_OSPREY1x1:
		2275	case BTTV_OSPREY1x1_SVID:
		2276	case BTTV_OSPREY2xx:
		2277	case BTTV_OSPREY2x0_SVID:
		2278	case BTTV_OSPREY2x0:
		2279	case BTTV_OSPREY500:
		2280	case BTTV_OSPREY540:
		2281	case BTTV_OSPREY2000:
		2282	bttv_readee(btv,eeprom_data,0xa0);
		2283	osprey_eeprom(btv);
		2284	break;
		2285	case BTTV_IDS_EAGLE:
		2286	init_ids_eagle(btv);
		2287	break;
		2288	case BTTV_MODTEC_205:
		2289	bttv_readee(btv,eeprom_data,0xa0);
		2290	modtec_eeprom(btv);
		2291	break;
170	giacomo	2292	}
		2293
		2294	/* pll configuration */
		2295	if (!(btv->id==848 && btv->revision==0x11)) {
		2296	/* defaults from card list */
		2297	if (PLL_28 == bttv_tvcards[btv->type].pll) {
		2298	btv->pll.pll_ifreq=28636363;
		2299	btv->pll.pll_crystal=BT848_IFORM_XT0;
		2300	}
		2301	if (PLL_35 == bttv_tvcards[btv->type].pll) {
		2302	btv->pll.pll_ifreq=35468950;
		2303	btv->pll.pll_crystal=BT848_IFORM_XT1;
		2304	}
		2305	/* insmod options can override */
		2306	switch (pll[btv->nr]) {
		2307	case 0: /* none */
		2308	btv->pll.pll_crystal = 0;
		2309	btv->pll.pll_ifreq = 0;
		2310	btv->pll.pll_ofreq = 0;
		2311	break;
		2312	case 1: /* 28 MHz */
		2313	case 28:
		2314	btv->pll.pll_ifreq = 28636363;
		2315	btv->pll.pll_ofreq = 0;
		2316	btv->pll.pll_crystal = BT848_IFORM_XT0;
		2317	break;
		2318	case 2: /* 35 MHz */
		2319	case 35:
		2320	btv->pll.pll_ifreq = 35468950;
		2321	btv->pll.pll_ofreq = 0;
		2322	btv->pll.pll_crystal = BT848_IFORM_XT1;
		2323	break;
		2324	}
		2325	}
428	giacomo	2326	btv->pll.pll_current = -1;
170	giacomo	2327
428	giacomo	2328	/* tuner configuration (from card list / autodetect / insmod option) */
		2329	if (UNSET != bttv_tvcards[btv->type].tuner_type)
		2330	if(UNSET == btv->tuner_type)
		2331	btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
		2332	if (UNSET != tuner[btv->nr])
170	giacomo	2333	btv->tuner_type = tuner[btv->nr];
428	giacomo	2334	printk("bttv%d: using tuner=%d\n",btv->nr,btv->tuner_type);
		2335	if (btv->pinnacle_id != UNSET)
		2336	bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
		2337	&btv->pinnacle_id);
		2338	if (btv->tuner_type != UNSET)
		2339	bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
		2340	btv->svhs = bttv_tvcards[btv->type].svhs;
		2341	if (svhs[btv->nr] != UNSET)
		2342	btv->svhs = svhs[btv->nr];
170	giacomo	2343
		2344	if (bttv_tvcards[btv->type].has_radio)
		2345	btv->has_radio=1;
428	giacomo	2346	if (bttv_tvcards[btv->type].audio_hook)
		2347	btv->audio_hook=bttv_tvcards[btv->type].audio_hook;
170	giacomo	2348
428	giacomo	2349	if (bttv_tvcards[btv->type].digital_mode == DIGITAL_MODE_CAMERA) {
		2350	/* detect Bt832 chip for quartzsight digital camera */
		2351	if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) \|\|
		2352	(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
		2353	boot_bt832(btv);
		2354	}
		2355
170	giacomo	2356	/* try to detect audio/fader chips */
		2357	if (!bttv_tvcards[btv->type].no_msp34xx &&
		2358	bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
428	giacomo	2359	if (autoload)
		2360	request_module("msp3400");
170	giacomo	2361	}
		2362
428	giacomo	2363	if (bttv_tvcards[btv->type].msp34xx_alt &&
		2364	bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) {
		2365	if (autoload)
		2366	request_module("msp3400");
		2367	}
		2368
170	giacomo	2369	if (!bttv_tvcards[btv->type].no_tda9875 &&
		2370	bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
428	giacomo	2371	if (autoload)
		2372	request_module("tda9875");
170	giacomo	2373	}
		2374
		2375	if (!bttv_tvcards[btv->type].no_tda7432 &&
428	giacomo	2376	bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
		2377	if (autoload)
		2378	request_module("tda7432");
170	giacomo	2379	}
		2380
		2381	if (bttv_tvcards[btv->type].needs_tvaudio) {
428	giacomo	2382	if (autoload)
		2383	request_module("tvaudio");
170	giacomo	2384	}
		2385
428	giacomo	2386	/* tuner modules */
		2387	if (btv->pinnacle_id != UNSET) {
		2388	if (autoload)
		2389	request_module("tda9887");
170	giacomo	2390	}
428	giacomo	2391	if (btv->tuner_type != UNSET) {
		2392	if (autoload)
		2393	request_module("tuner");
		2394	}
170	giacomo	2395	}
		2396
		2397
		2398	/* ----------------------------------------------------------------------- */
		2399	/* some hauppauge specific stuff */
		2400
		2401	static struct HAUPPAUGE_TUNER
		2402	{
		2403	int id;
		2404	char *name;
		2405	}
428	giacomo	2406	hauppauge_tuner[] __devinitdata =
170	giacomo	2407	{
		2408	{ TUNER_ABSENT, "" },
		2409	{ TUNER_ABSENT, "External" },
		2410	{ TUNER_ABSENT, "Unspecified" },
		2411	{ TUNER_PHILIPS_PAL, "Philips FI1216" },
		2412	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
		2413	{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
		2414	{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
		2415	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
		2416	{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
		2417	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
		2418	{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
		2419	{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
		2420	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
		2421	{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
		2422	{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
		2423	{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
		2424	{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
		2425	{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
		2426	{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
		2427	{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
		2428	{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
		2429	{ TUNER_PHILIPS_PAL, "Philips FM1216" },
		2430	{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
		2431	{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
		2432	{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
		2433	{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
		2434	{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
		2435	{ TUNER_ABSENT, "Samsung TCPN9082D" },
		2436	{ TUNER_ABSENT, "Samsung TCPM9092P" },
		2437	{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
		2438	{ TUNER_ABSENT, "Samsung TCPN9085D" },
		2439	{ TUNER_ABSENT, "Samsung TCPB9085P" },
		2440	{ TUNER_ABSENT, "Samsung TCPL9091P" },
		2441	{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
		2442	{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
		2443	{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
428	giacomo	2444	{ TUNER_PHILIPS_NTSC, "Philips TD1536" },
		2445	{ TUNER_PHILIPS_NTSC, "Philips TD1536D" },
170	giacomo	2446	{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
		2447	{ TUNER_ABSENT, "Philips FI1256MP" },
		2448	{ TUNER_ABSENT, "Samsung TCPQ9091P" },
		2449	{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
		2450	{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
		2451	{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
		2452	{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
		2453	{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
428	giacomo	2454	{ TUNER_LG_NTSC_FM, "LG TPI8NSR01F"},
		2455	{ TUNER_LG_PAL_FM, "LG TPI8PSB01D"},
		2456	{ TUNER_LG_PAL, "LG TPI8PSB11D"},
170	giacomo	2457	{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
		2458	{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
		2459	};
		2460
428	giacomo	2461	static void modtec_eeprom(struct bttv *btv)
170	giacomo	2462	{
428	giacomo	2463	if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
		2464	btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
		2465	printk("bttv Modtec: Tuner autodetected %s\n",
		2466	&eeprom_data[0x1e]);
		2467	} else {
		2468	printk("bttv Modtec: Unknown TunerString:%s\n",
		2469	&eeprom_data[0x1e]);
		2470	}
		2471	}
170	giacomo	2472
428	giacomo	2473	static void __devinit hauppauge_eeprom(struct bttv *btv)
		2474	{
		2475	unsigned int blk2,tuner,radio,model;
		2476
170	giacomo	2477	if (eeprom_data[0] != 0x84 \|\| eeprom_data[2] != 0)
		2478	printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
		2479	btv->nr);
		2480
		2481	/* Block 2 starts after len+3 bytes header */
		2482	blk2 = eeprom_data[1] + 3;
		2483
		2484	/* decode + use some config infos */
		2485	model = eeprom_data[12] << 8 \| eeprom_data[11];
		2486	tuner = eeprom_data[9];
		2487	radio = eeprom_data[blk2-1] & 0x01;
		2488
428	giacomo	2489	if (tuner < ARRAY_SIZE(hauppauge_tuner))
170	giacomo	2490	btv->tuner_type = hauppauge_tuner[tuner].id;
		2491	if (radio)
		2492	btv->has_radio = 1;
		2493
		2494	if (bttv_verbose)
		2495	printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
		2496	"tuner=%s (%d), radio=%s\n",
		2497	btv->nr, model, hauppauge_tuner[tuner].name,
		2498	btv->tuner_type, radio ? "yes" : "no");
		2499	}
		2500
428	giacomo	2501	static int terratec_active_radio_upgrade(struct bttv *btv)
170	giacomo	2502	{
428	giacomo	2503	int freq;
		2504
		2505	btv->has_radio = 1;
		2506	btv->has_matchbox = 1;
		2507	btv->mbox_we = 0x10;
		2508	btv->mbox_most = 0x20;
		2509	btv->mbox_clk = 0x08;
		2510	btv->mbox_data = 0x04;
		2511	btv->mbox_mask = 0x3c;
		2512
		2513	btv->mbox_iow = 1 << 8;
		2514	btv->mbox_ior = 1 << 9;
		2515	btv->mbox_csel = 1 << 10;
		2516
		2517	freq=88000/62.5;
		2518	tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
		2519	if (0x1ed8 == tea5757_read(btv)) {
		2520	printk("bttv%d: Terratec Active Radio Upgrade found.\n",
		2521	btv->nr);
		2522	btv->has_radio = 1;
		2523	btv->has_matchbox = 1;
		2524	} else {
		2525	btv->has_radio = 0;
		2526	btv->has_matchbox = 0;
		2527	}
		2528	return 0;
		2529	}
		2530
		2531
		2532	/* ----------------------------------------------------------------------- */
		2533
		2534	/*
		2535	* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
		2536	*
		2537	* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
		2538	* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
		2539	* unpacked with unzip).
		2540	*/
		2541	#define PVR_GPIO_DELAY 10
		2542
		2543	#define BTTV_ALT_DATA 0x000001
		2544	#define BTTV_ALT_DCLK 0x100000
		2545	#define BTTV_ALT_NCONFIG 0x800000
		2546
		2547	static int __devinit pvr_altera_load(struct bttv btv, u8 micro, u32 microlen)
		2548	{
		2549	u32 n;
		2550	u8 bits;
		2551	int i;
		2552
		2553	btwrite(BTTV_ALT_DATA\|BTTV_ALT_DCLK\|BTTV_ALT_NCONFIG,
		2554	BT848_GPIO_OUT_EN);
		2555	btwrite(0,BT848_GPIO_DATA);
		2556	udelay(PVR_GPIO_DELAY);
		2557
		2558	btwrite(BTTV_ALT_NCONFIG,BT848_GPIO_DATA);
		2559	udelay(PVR_GPIO_DELAY);
		2560
		2561	for (n = 0; n < microlen; n++) {
		2562	bits = micro[n];
		2563	for ( i = 0 ; i < 8 ; i++ ) {
		2564	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2565	if (bits & 0x01)
		2566	btor(BTTV_ALT_DATA,BT848_GPIO_DATA);
		2567	else
		2568	btand(~BTTV_ALT_DATA,BT848_GPIO_DATA);
		2569	btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2570	bits >>= 1;
		2571	}
		2572	}
		2573	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2574	udelay(PVR_GPIO_DELAY);
		2575
		2576	/* begin Altera init loop (Not necessary,but doesn't hurt) */
		2577	for (i = 0 ; i < 30 ; i++) {
		2578	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2579	btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2580	}
		2581	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2582	return 0;
		2583	}
		2584
		2585	#ifndef CONFIG_FW_LOADER
		2586	/* old 2.4.x way -- via soundcore's mod_firmware_load */
		2587
		2588	static char *firm_altera = "/usr/lib/video4linux/hcwamc.rbf";
		2589	MODULE_PARM(firm_altera,"s");
		2590	MODULE_PARM_DESC(firm_altera,"WinTV/PVR firmware "
		2591	"(driver CD => unzip pvr45xxx.exe => hcwamc.rbf)");
		2592
		2593	extern int mod_firmware_load(const char fn, char *fp);
		2594
		2595	int __devinit pvr_boot(struct bttv *btv)
		2596	{
		2597	u32 microlen;
		2598	u8 *micro;
		2599	int result;
		2600
		2601	microlen = mod_firmware_load(firm_altera, (char**) &micro);
		2602	if (!microlen) {
		2603	printk(KERN_WARNING "bttv%d: altera firmware not found [%s]\n",
		2604	btv->nr, firm_altera);
		2605	return -1;
		2606	}
		2607
		2608	printk(KERN_INFO "bttv%d: uploading altera firmware [%s] ...\n",
		2609	btv->nr, firm_altera);
		2610	result = pvr_altera_load(btv, micro, microlen);
		2611	printk(KERN_INFO "bttv%d: ... upload %s\n",
		2612	btv->nr, (result < 0) ? "failed" : "ok");
		2613	vfree(micro);
		2614	return result;
		2615	}
		2616	#else
		2617	/* new 2.5.x way -- via hotplug firmware loader */
		2618
		2619	int __devinit pvr_boot(struct bttv *btv)
		2620	{
		2621	const struct firmware *fw_entry;
		2622	int rc;
		2623
		2624	rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->dev->dev);
		2625	if (rc != 0) {
		2626	printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
		2627	btv->nr);
		2628	return rc;
170	giacomo	2629	}
428	giacomo	2630	rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
		2631	printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
		2632	btv->nr, (rc < 0) ? "failed" : "ok");
		2633	release_firmware(fw_entry);
		2634	return rc;
		2635	}
		2636	#endif
		2637
		2638	/* ----------------------------------------------------------------------- */
		2639	/* some osprey specific stuff */
		2640
		2641	static void __devinit osprey_eeprom(struct bttv *btv)
		2642	{
		2643	int i = 0;
		2644	unsigned char *ee = eeprom_data;
		2645	unsigned long serial = 0;
170	giacomo	2646
428	giacomo	2647	if (btv->type == 0) {
		2648	/* this might be an antique... check for MMAC label in eeprom */
		2649	if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
		2650	unsigned char checksum = 0;
		2651	for (i =0; i<21; i++)
		2652	checksum += ee[i];
		2653	if (checksum != ee[21])
		2654	return;
		2655	btv->type = BTTV_OSPREY1x0_848;
		2656	for (i = 12; i < 21; i++)
		2657	serial *= 10, serial += ee[i] - '0';
		2658	}
		2659	} else {
		2660	unsigned short type;
		2661	int offset = 4*16;
170	giacomo	2662
428	giacomo	2663	for(; offset < 8*16; offset += 16) {
		2664	unsigned short checksum = 0;
		2665	/* verify the checksum */
		2666	for(i = 0; i<14; i++) checksum += ee[i+offset];
		2667	checksum = ~checksum; /* no idea why */
		2668	if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
		2669	((checksum & 0x0FF) == ee[offset+15])) {
		2670	break;
		2671	}
		2672	}
170	giacomo	2673
428	giacomo	2674	if (offset >= 8*16)
		2675	return;
170	giacomo	2676
428	giacomo	2677	/* found a valid descriptor */
		2678	type = (ee[offset+4]<<8) \| (ee[offset+5]);
		2679
		2680	switch(type) {
170	giacomo	2681
428	giacomo	2682	/* 848 based */
		2683	case 0x0004:
		2684	btv->type = BTTV_OSPREY1x0_848;
		2685	break;
		2686	case 0x0005:
		2687	btv->type = BTTV_OSPREY101_848;
		2688	break;
		2689
		2690	/* 878 based */
		2691	case 0x0012:
		2692	case 0x0013:
		2693	btv->type = BTTV_OSPREY1x0;
		2694	break;
		2695	case 0x0014:
		2696	case 0x0015:
		2697	btv->type = BTTV_OSPREY1x1;
		2698	break;
		2699	case 0x0016:
		2700	case 0x0017:
		2701	case 0x0020:
		2702	btv->type = BTTV_OSPREY1x1_SVID;
		2703	break;
		2704	case 0x0018:
		2705	case 0x0019:
		2706	case 0x001E:
		2707	case 0x001F:
		2708	btv->type = BTTV_OSPREY2xx;
		2709	break;
		2710	case 0x001A:
		2711	case 0x001B:
		2712	btv->type = BTTV_OSPREY2x0_SVID;
		2713	break;
		2714	case 0x0040:
		2715	btv->type = BTTV_OSPREY500;
		2716	break;
		2717	case 0x0050:
		2718	case 0x0056:
		2719	btv->type = BTTV_OSPREY540;
		2720	/* bttv_osprey_540_init(btv); */
		2721	break;
		2722	case 0x0060:
		2723	case 0x0070:
		2724	btv->type = BTTV_OSPREY2x0;
		2725	//enable output on select control lines
		2726	btwrite(0x000303, BT848_GPIO_OUT_EN);
		2727	break;
		2728	default:
		2729	/* unknown...leave generic, but get serial # */
		2730	break;
		2731	}
		2732	serial = (ee[offset+6] << 24)
		2733	\| (ee[offset+7] << 16)
		2734	\| (ee[offset+8] << 8)
		2735	\| (ee[offset+9]);
		2736	}
		2737
		2738	printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
		2739	btv->nr, btv->type, bttv_tvcards[btv->type].name,serial);
		2740	}
		2741
170	giacomo	2742	/* ----------------------------------------------------------------------- */
		2743	/* AVermedia specific stuff, from bktr_card.c */
		2744
		2745	int tuner_0_table[] = {
428	giacomo	2746	TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
		2747	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
170	giacomo	2748	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		2749	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
		2750	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
		2751	#if 0
		2752	int tuner_0_fm_table[] = {
		2753	PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
		2754	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		2755	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		2756	PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
		2757	PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
		2758	#endif
		2759
		2760	int tuner_1_table[] = {
		2761	TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
		2762	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		2763	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		2764	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
		2765	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
		2766
428	giacomo	2767	static void __devinit avermedia_eeprom(struct bttv *btv)
170	giacomo	2768	{
428	giacomo	2769	int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
170	giacomo	2770
428	giacomo	2771	tuner_make = (eeprom_data[0x41] & 0x7);
		2772	tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
		2773	tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
		2774	btv->has_remote = (eeprom_data[0x42] & 0x01);
170	giacomo	2775
		2776	if (tuner_make == 0 \|\| tuner_make == 2)
		2777	if(tuner_format <=9)
		2778	tuner = tuner_0_table[tuner_format];
		2779	if (tuner_make == 1)
		2780	if(tuner_format <=9)
		2781	tuner = tuner_1_table[tuner_format];
		2782
428	giacomo	2783	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
170	giacomo	2784	btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
		2785	if(tuner) {
		2786	btv->tuner_type=tuner;
428	giacomo	2787	printk("%d",tuner);
170	giacomo	2788	} else
428	giacomo	2789	printk("Unknown type");
		2790	printk(" radio:%s remote control:%s\n",
		2791	tuner_tv_fm ? "yes" : "no",
		2792	btv->has_remote ? "yes" : "no");
170	giacomo	2793	}
		2794
		2795	/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
		2796	void bttv_tda9880_setnorm(struct bttv *btv, int norm)
		2797	{
		2798	// fix up our card entry
		2799	if(norm==VIDEO_MODE_NTSC) {
		2800	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
		2801	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
		2802	dprintk("bttv_tda9880_setnorm to NTSC\n");
		2803	}
		2804	else {
		2805	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
		2806	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
		2807	dprintk("bttv_tda9880_setnorm to PAL\n");
		2808	}
		2809	// set GPIO according
428	giacomo	2810	btaor(bttv_tvcards[btv->type].audiomux[btv->audio],
		2811	~bttv_tvcards[btv->type].gpiomask, BT848_GPIO_DATA);
170	giacomo	2812	}
		2813
		2814
		2815	/*
		2816	* reset/enable the MSP on some Hauppauge cards
428	giacomo	2817	* Thanks to Ky�sti M�lkki (kmalkki@cc.hut.fi)!
170	giacomo	2818	*
		2819	* Hauppauge: pin 5
		2820	* Voodoo: pin 20
		2821	*/
428	giacomo	2822	static void __devinit boot_msp34xx(struct bttv *btv, int pin)
170	giacomo	2823	{
		2824	int mask = (1 << pin);
		2825
428	giacomo	2826	btaor(mask, ~mask, BT848_GPIO_OUT_EN);
		2827	btaor(0, ~mask, BT848_GPIO_DATA);
170	giacomo	2828	udelay(2500);
428	giacomo	2829	btaor(mask, ~mask, BT848_GPIO_DATA);
170	giacomo	2830	if (bttv_gpio)
		2831	bttv_gpio_tracking(btv,"msp34xx");
		2832
		2833	if (bttv_verbose)
		2834	printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
		2835	"init [%d]\n", btv->nr, pin);
		2836	}
		2837
428	giacomo	2838	static void __devinit boot_bt832(struct bttv *btv)
		2839	{
		2840	int outbits,databits,resetbit=0;
170	giacomo	2841
428	giacomo	2842	switch (btv->type) {
		2843	case BTTV_PXELVWPLTVPAK:
		2844	resetbit = 0x400000;
		2845	break;
		2846	case BTTV_MODTEC_205:
		2847	resetbit = 1<<9;
		2848	break;
		2849	default:
		2850	BUG();
		2851	}
		2852
		2853	request_module("bt832");
		2854	bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
		2855
		2856	printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->nr,resetbit);
		2857	btwrite(0, BT848_GPIO_DATA);
		2858	outbits = btread(BT848_GPIO_OUT_EN);
		2859	databits= btread(BT848_GPIO_DATA);
		2860	btwrite(resetbit, BT848_GPIO_OUT_EN);
		2861	udelay(5);
		2862	btwrite(resetbit, BT848_GPIO_DATA);
		2863	udelay(5);
		2864	btwrite(0, BT848_GPIO_DATA);
		2865	udelay(5);
		2866	btwrite(outbits, BT848_GPIO_OUT_EN);
		2867	btwrite(databits, BT848_GPIO_DATA);
		2868
		2869	// bt832 on pixelview changes from i2c 0x8a to 0x88 after
		2870	// being reset as above. So we must follow by this:
		2871	bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
		2872	}
		2873
170	giacomo	2874	/* ----------------------------------------------------------------------- */
		2875	/* Imagenation L-Model PXC200 Framegrabber */
		2876	/* This is basically the same procedure as
		2877	* used by Alessandro Rubini in his pxc200
		2878	* driver, but using BTTV functions */
		2879
428	giacomo	2880	static void __devinit init_PXC200(struct bttv *btv)
170	giacomo	2881	{
428	giacomo	2882	static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
		2883	0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
		2884	0x00 };
		2885	unsigned int i;
		2886	int tmp;
		2887	u32 val;
		2888
170	giacomo	2889	/* Initialise GPIO-connevted stuff */
		2890	btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
428	giacomo	2891	btwrite(0,BT848_GPIO_DATA);
170	giacomo	2892	udelay(3);
428	giacomo	2893	btwrite(1<<13,BT848_GPIO_DATA);
170	giacomo	2894	/* GPIO inputs are pulled up, so no need to drive
		2895	* reset pin any longer */
		2896	btwrite(0,BT848_GPIO_OUT_EN);
		2897	if (bttv_gpio)
		2898	bttv_gpio_tracking(btv,"pxc200");
		2899
		2900	/* we could/should try and reset/control the AD pots? but
		2901	right now we simply turned off the crushing. Without
		2902	this the AGC drifts drifts
		2903	remember the EN is reverse logic -->
		2904	setting BT848_ADC_AGC_EN disable the AGC
		2905	tboult@eecs.lehigh.edu
		2906	*/
428	giacomo	2907
170	giacomo	2908	btwrite(BT848_ADC_RESERVED\|BT848_ADC_AGC_EN, BT848_ADC);
		2909
		2910	/* Initialise MAX517 DAC */
		2911	printk(KERN_INFO "Setting DAC reference voltage level ...\n");
		2912	bttv_I2CWrite(btv,0x5E,0,0x80,1);
		2913
		2914	/* Initialise 12C508 PIC */
		2915	/* The I2CWrite and I2CRead commmands are actually to the
		2916	* same chips - but the R/W bit is included in the address
		2917	* argument so the numbers are different */
		2918
428	giacomo	2919
		2920	printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
		2921
		2922	/* First of all, enable the clock line. This is used in the PXC200-F */
		2923	val = btread(BT848_GPIO_DMA_CTL);
		2924	val \|= BT848_GPIO_DMA_CTL_GPCLKMODE;
		2925	btwrite(val, BT848_GPIO_DMA_CTL);
		2926
		2927	/* Then, push to 0 the reset pin long enough to reset the *
		2928	* device same as above for the reset line, but not the same
		2929	* value sent to the GPIO-connected stuff
		2930	* which one is the good one? */
		2931	btwrite( (1<<2), BT848_GPIO_OUT_EN); /* only the reset pin */
		2932	btwrite(0, BT848_GPIO_DATA);
		2933	udelay(10);
		2934	btwrite(1<<2, BT848_GPIO_DATA);
		2935
		2936	for (i = 0; i < ARRAY_SIZE(vals); i++) {
		2937	tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
		2938	if (tmp != -1) {
		2939	printk(KERN_INFO
		2940	"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
		2941	vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
		2942	}
		2943	}
		2944
170	giacomo	2945	printk(KERN_INFO "PXC200 Initialised.\n");
		2946	}
		2947
428	giacomo	2948
170	giacomo	2949	/* ----------------------------------------------------------------------- */
		2950	/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
		2951	/*
		2952	* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
		2953	* This code is placed under the terms of the GNU General Public License
		2954	*
		2955	* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
		2956	*/
		2957
428	giacomo	2958	void bus_low(struct bttv *btv, int bit)
		2959	{
		2960	if (btv->mbox_ior) {
		2961	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2962	BT848_GPIO_DATA);
		2963	udelay(5);
		2964	}
170	giacomo	2965
428	giacomo	2966	btand(~(bit), BT848_GPIO_DATA);
		2967	udelay(5);
170	giacomo	2968
428	giacomo	2969	if (btv->mbox_ior) {
		2970	btand(~(btv->mbox_iow \| btv->mbox_csel),
		2971	BT848_GPIO_DATA);
		2972	udelay(5);
		2973	}
		2974	}
		2975
		2976	void bus_high(struct bttv *btv, int bit)
		2977	{
		2978	if (btv->mbox_ior) {
		2979	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2980	BT848_GPIO_DATA);
		2981	udelay(5);
		2982	}
		2983
		2984	btor((bit), BT848_GPIO_DATA);
		2985	udelay(5);
		2986
		2987	if (btv->mbox_ior) {
		2988	btand(~(btv->mbox_iow \| btv->mbox_csel),
		2989	BT848_GPIO_DATA);
		2990	udelay(5);
		2991	}
		2992	}
		2993
		2994	int bus_in(struct bttv *btv, int bit)
		2995	{
		2996	if (btv->mbox_ior) {
		2997	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2998	BT848_GPIO_DATA);
		2999	udelay(5);
		3000
		3001	btand(~(btv->mbox_ior \| btv->mbox_csel),
		3002	BT848_GPIO_DATA);
		3003	udelay(5);
		3004	}
		3005	return btread(BT848_GPIO_DATA) & (bit);
		3006	}
		3007
170	giacomo	3008	/* TEA5757 register bits */
		3009	#define TEA_FREQ 0:14
		3010	#define TEA_BUFFER 15:15
		3011
		3012	#define TEA_SIGNAL_STRENGTH 16:17
		3013
		3014	#define TEA_PORT1 18:18
		3015	#define TEA_PORT0 19:19
		3016
		3017	#define TEA_BAND 20:21
		3018	#define TEA_BAND_FM 0
		3019	#define TEA_BAND_MW 1
		3020	#define TEA_BAND_LW 2
		3021	#define TEA_BAND_SW 3
		3022
		3023	#define TEA_MONO 22:22
		3024	#define TEA_ALLOW_STEREO 0
		3025	#define TEA_FORCE_MONO 1
		3026
		3027	#define TEA_SEARCH_DIRECTION 23:23
		3028	#define TEA_SEARCH_DOWN 0
		3029	#define TEA_SEARCH_UP 1
		3030
		3031	#define TEA_STATUS 24:24
		3032	#define TEA_STATUS_TUNED 0
		3033	#define TEA_STATUS_SEARCHING 1
		3034
428	giacomo	3035	/* Low-level stuff */
		3036	static int tea5757_read(struct bttv *btv)
		3037	{
		3038	unsigned long timeout;
		3039	int value = 0;
		3040	int i;
		3041
		3042	/* better safe than sorry */
		3043	btaor((btv->mbox_clk \| btv->mbox_we),
		3044	~btv->mbox_mask, BT848_GPIO_OUT_EN);
		3045
		3046	if (btv->mbox_ior) {
		3047	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		3048	BT848_GPIO_DATA);
		3049	udelay(5);
		3050	}
		3051
		3052	if (bttv_gpio)
		3053	bttv_gpio_tracking(btv,"tea5757 read");
		3054
		3055	bus_low(btv,btv->mbox_we);
		3056	bus_low(btv,btv->mbox_clk);
		3057
		3058	udelay(10);
		3059	timeout= jiffies + HZ;
		3060
		3061	// wait for DATA line to go low; error if it doesn't
		3062	while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
		3063	schedule();
		3064	if (bus_in(btv,btv->mbox_data)) {
		3065	printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->nr);
		3066	return -1;
		3067	}
		3068
		3069	dprintk("bttv%d: tea5757:",btv->nr);
		3070	for(i = 0; i < 24; i++)
		3071	{
		3072	udelay(5);
		3073	bus_high(btv,btv->mbox_clk);
		3074	udelay(5);
		3075	dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
		3076	bus_low(btv,btv->mbox_clk);
		3077	value <<= 1;
		3078	value \|= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
		3079	dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
		3080	}
		3081	dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->nr, value);
		3082	return value;
		3083	}
		3084
		3085	static int tea5757_write(struct bttv *btv, int value)
		3086	{
		3087	int i;
		3088	int reg = value;
		3089
		3090	btaor(btv->mbox_clk \| btv->mbox_we \| btv->mbox_data,
		3091	~btv->mbox_mask, BT848_GPIO_OUT_EN);
		3092
		3093	if (btv->mbox_ior) {
		3094	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		3095	BT848_GPIO_DATA);
		3096	udelay(5);
		3097	}
		3098	if (bttv_gpio)
		3099	bttv_gpio_tracking(btv,"tea5757 write");
		3100
		3101	dprintk("bttv%d: tea5757: write 0x%X\n", btv->nr, value);
		3102	bus_low(btv,btv->mbox_clk);
		3103	bus_high(btv,btv->mbox_we);
		3104	for(i = 0; i < 25; i++)
		3105	{
		3106	if (reg & 0x1000000)
		3107	bus_high(btv,btv->mbox_data);
		3108	else
		3109	bus_low(btv,btv->mbox_data);
		3110	reg <<= 1;
		3111	bus_high(btv,btv->mbox_clk);
		3112	udelay(10);
		3113	bus_low(btv,btv->mbox_clk);
		3114	udelay(10);
		3115	}
		3116	bus_low(btv,btv->mbox_we); /* unmute !!! */
		3117	return 0;
		3118	}
		3119
		3120	void tea5757_set_freq(struct bttv *btv, unsigned short freq)
		3121	{
		3122	dprintk("tea5757_set_freq %d\n",freq);
		3123	tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
		3124	#if 0
		3125	/* breaks Miro PCTV */
		3126	value = tea5757_read(btv);
		3127	dprintk("bttv%d: tea5757 readback=0x%x\n",btv->nr,value);
		3128	#endif
		3129	}
		3130
		3131
170	giacomo	3132	/* ----------------------------------------------------------------------- */
		3133	/* winview */
		3134
		3135	void winview_audio(struct bttv btv, struct video_audio v, int set)
		3136	{
		3137	/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
		3138	int bits_out, loops, vol, data;
		3139
		3140	if (!set) {
		3141	/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
		3142	v->flags \|= VIDEO_AUDIO_VOLUME;
		3143	return;
		3144	}
		3145
		3146	/* 32 levels logarithmic */
		3147	vol = 32 - ((v->volume>>11));
		3148	/* units */
		3149	bits_out = (PT2254_DBS_IN_2>>(vol%5));
		3150	/* tens */
		3151	bits_out \|= (PT2254_DBS_IN_10>>(vol/5));
		3152	bits_out \|= PT2254_L_CHANNEL \| PT2254_R_CHANNEL;
428	giacomo	3153	data = btread(BT848_GPIO_DATA);
170	giacomo	3154	data &= ~(WINVIEW_PT2254_CLK\| WINVIEW_PT2254_DATA\|
		3155	WINVIEW_PT2254_STROBE);
		3156	for (loops = 17; loops >= 0 ; loops--) {
		3157	if (bits_out & (1<<loops))
		3158	data \|= WINVIEW_PT2254_DATA;
		3159	else
		3160	data &= ~WINVIEW_PT2254_DATA;
428	giacomo	3161	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3162	udelay(5);
		3163	data \|= WINVIEW_PT2254_CLK;
428	giacomo	3164	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3165	udelay(5);
		3166	data &= ~WINVIEW_PT2254_CLK;
428	giacomo	3167	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3168	}
		3169	data \|= WINVIEW_PT2254_STROBE;
		3170	data &= ~WINVIEW_PT2254_DATA;
428	giacomo	3171	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3172	udelay(10);
		3173	data &= ~WINVIEW_PT2254_STROBE;
428	giacomo	3174	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3175	}
		3176
		3177	/* ----------------------------------------------------------------------- */
		3178	/* mono/stereo control for various cards (which don't use i2c chips but */
		3179	/* connect something to the GPIO pins */
		3180
		3181	static void
		3182	gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set)
		3183	{
		3184	unsigned int con = 0;
		3185
		3186	if (set) {
		3187	btor(0x300, BT848_GPIO_OUT_EN);
		3188	if (v->mode & VIDEO_SOUND_LANG1)
		3189	con = 0x000;
		3190	if (v->mode & VIDEO_SOUND_LANG2)
		3191	con = 0x300;
		3192	if (v->mode & VIDEO_SOUND_STEREO)
		3193	con = 0x200;
		3194	// if (v->mode & VIDEO_SOUND_MONO)
		3195	// con = 0x100;
428	giacomo	3196	btaor(con, ~0x300, BT848_GPIO_DATA);
170	giacomo	3197	} else {
		3198	v->mode = VIDEO_SOUND_STEREO \|
		3199	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3200	}
		3201	}
		3202
		3203	/*
		3204	* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
		3205	* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
		3206	* 0xdde enables mono and 0xccd enables sap
		3207	*
		3208	* Petr Vandrovec <VANDROVE@vc.cvut.cz>
		3209	* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
		3210	* input/output sound connection, so both must be set for output mode.
		3211	*
		3212	* Looks like it's needed only for the "tvphone", the "tvphone 98"
		3213	* handles this with a tda9840
		3214	*
		3215	*/
		3216	static void
		3217	avermedia_tvphone_audio(struct bttv btv, struct video_audio v, int set)
		3218	{
		3219	int val = 0;
		3220
		3221	if (set) {
		3222	if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
		3223	val = 0x02;
		3224	if (v->mode & VIDEO_SOUND_STEREO)
		3225	val = 0x01;
		3226	if (val) {
428	giacomo	3227	btaor(val, ~0x03, BT848_GPIO_DATA);
170	giacomo	3228	if (bttv_gpio)
		3229	bttv_gpio_tracking(btv,"avermedia");
		3230	}
		3231	} else {
		3232	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3233	VIDEO_SOUND_LANG1;
		3234	return;
		3235	}
		3236	}
		3237
		3238	/* Lifetec 9415 handling */
		3239	static void
		3240	lt9415_audio(struct bttv btv, struct video_audio v, int set)
		3241	{
		3242	int val = 0;
		3243
428	giacomo	3244	if (btread(BT848_GPIO_DATA) & 0x4000) {
170	giacomo	3245	v->mode = VIDEO_SOUND_MONO;
		3246	return;
		3247	}
		3248
		3249	if (set) {
		3250	if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
		3251	val = 0x0080;
		3252	if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
		3253	val = 0x0880;
		3254	if ((v->mode & VIDEO_SOUND_LANG1) \|\|
		3255	(v->mode & VIDEO_SOUND_MONO))
		3256	val = 0;
428	giacomo	3257	btaor(val, ~0x0880, BT848_GPIO_DATA);
170	giacomo	3258	if (bttv_gpio)
		3259	bttv_gpio_tracking(btv,"lt9415");
		3260	} else {
		3261	/* autodetect doesn't work with this card :-( */
		3262	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3263	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3264	return;
		3265	}
		3266	}
		3267
428	giacomo	3268	// TDA9821 on TerraTV+ Bt848, Bt878
170	giacomo	3269	static void
		3270	terratv_audio(struct bttv btv, struct video_audio v, int set)
		3271	{
		3272	unsigned int con = 0;
		3273
		3274	if (set) {
		3275	btor(0x180000, BT848_GPIO_OUT_EN);
		3276	if (v->mode & VIDEO_SOUND_LANG2)
		3277	con = 0x080000;
		3278	if (v->mode & VIDEO_SOUND_STEREO)
		3279	con = 0x180000;
428	giacomo	3280	btaor(con, ~0x180000, BT848_GPIO_DATA);
170	giacomo	3281	if (bttv_gpio)
		3282	bttv_gpio_tracking(btv,"terratv");
		3283	} else {
		3284	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3285	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3286	}
		3287	}
		3288
		3289	static void
		3290	winfast2000_audio(struct bttv btv, struct video_audio v, int set)
		3291	{
		3292	unsigned long val = 0;
		3293
		3294	if (set) {
		3295	/btor (0xc32000, BT848_GPIO_OUT_EN);/
		3296	if (v->mode & VIDEO_SOUND_MONO) /* Mono */
		3297	val = 0x420000;
		3298	if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
		3299	val = 0x420000;
		3300	if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
		3301	val = 0x410000;
		3302	if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
		3303	val = 0x020000;
		3304	if (val) {
428	giacomo	3305	btaor(val, ~0x430000, BT848_GPIO_DATA);
170	giacomo	3306	if (bttv_gpio)
		3307	bttv_gpio_tracking(btv,"winfast2000");
		3308	}
		3309	} else {
		3310	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3311	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3312	}
		3313	}
		3314
		3315	/*
		3316	* Dariusz Kowalewski <darekk@automex.pl>
		3317	* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
		3318	* revision 9B has on-board TDA9874A sound decoder).
428	giacomo	3319	*
		3320	* Note: There are card variants without tda9874a. Forcing the "stereo sound route"
		3321	* will mute this cards.
170	giacomo	3322	*/
		3323	static void
		3324	pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set)
		3325	{
		3326	unsigned int val = 0;
		3327
428	giacomo	3328	#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
		3329	if (btv->radio_user)
		3330	return;
		3331	#else
170	giacomo	3332	if (btv->radio)
		3333	return;
428	giacomo	3334	#endif
170	giacomo	3335
		3336	if (set) {
		3337	if (v->mode & VIDEO_SOUND_MONO) {
		3338	val = 0x01;
		3339	}
		3340	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		3341	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		3342	val = 0x02;
		3343	}
		3344	if (val) {
428	giacomo	3345	btaor(val, ~0x03, BT848_GPIO_DATA);
170	giacomo	3346	if (bttv_gpio)
		3347	bttv_gpio_tracking(btv,"pvbt878p9b");
		3348	}
		3349	} else {
		3350	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3351	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3352	}
		3353	}
		3354
		3355	/*
		3356	* Dariusz Kowalewski <darekk@automex.pl>
		3357	* sound control for FlyVideo 2000S (with tda9874 decoder)
		3358	* based on pvbt878p9b_audio() - this is not tested, please fix!!!
		3359	*/
		3360	static void
		3361	fv2000s_audio(struct bttv btv, struct video_audio v, int set)
		3362	{
		3363	unsigned int val = 0xffff;
		3364
428	giacomo	3365	#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
		3366	if (btv->radio_user)
		3367	return;
		3368	#else
170	giacomo	3369	if (btv->radio)
		3370	return;
428	giacomo	3371	#endif
170	giacomo	3372	if (set) {
		3373	if (v->mode & VIDEO_SOUND_MONO) {
		3374	val = 0x0000;
		3375	}
		3376	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		3377	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		3378	val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
		3379	}
		3380	if (val != 0xffff) {
428	giacomo	3381	btaor(val, ~0x1800, BT848_GPIO_DATA);
170	giacomo	3382	if (bttv_gpio)
		3383	bttv_gpio_tracking(btv,"fv2000s");
		3384	}
		3385	} else {
		3386	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3387	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3388	}
		3389	}
		3390
		3391	/*
		3392	* sound control for Canopus WinDVR PCI
		3393	* Masaki Suzuki <masaki@btree.org>
		3394	*/
		3395	static void
		3396	windvr_audio(struct bttv btv, struct video_audio v, int set)
		3397	{
		3398	unsigned long val = 0;
		3399
		3400	if (set) {
		3401	if (v->mode & VIDEO_SOUND_MONO)
		3402	val = 0x040000;
		3403	if (v->mode & VIDEO_SOUND_LANG1)
		3404	val = 0;
		3405	if (v->mode & VIDEO_SOUND_LANG2)
		3406	val = 0x100000;
		3407	if (v->mode & VIDEO_SOUND_STEREO)
		3408	val = 0;
		3409	if (val) {
428	giacomo	3410	btaor(val, ~0x140000, BT848_GPIO_DATA);
170	giacomo	3411	if (bttv_gpio)
		3412	bttv_gpio_tracking(btv,"windvr");
		3413	}
		3414	} else {
		3415	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3416	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3417	}
		3418	}
		3419
428	giacomo	3420	/*
		3421	* sound control for AD-TVK503
		3422	* Hiroshi Takekawa <sian@big.or.jp>
		3423	*/
		3424	static void
		3425	adtvk503_audio(struct bttv btv, struct video_audio v, int set)
		3426	{
		3427	unsigned int con = 0xffffff;
		3428
		3429	//btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
		3430
		3431	if (set) {
		3432	//btor(***, BT848_GPIO_OUT_EN);
		3433	if (v->mode & VIDEO_SOUND_LANG1)
		3434	con = 0x00000000;
		3435	if (v->mode & VIDEO_SOUND_LANG2)
		3436	con = 0x00180000;
		3437	if (v->mode & VIDEO_SOUND_STEREO)
		3438	con = 0x00000000;
		3439	if (v->mode & VIDEO_SOUND_MONO)
		3440	con = 0x00060000;
		3441	if (con != 0xffffff) {
		3442	btaor(con, ~0x1e0000, BT848_GPIO_DATA);
		3443	if (bttv_gpio)
		3444	bttv_gpio_tracking(btv, "adtvk503");
		3445	}
		3446	} else {
		3447	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3448	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3449	}
		3450	}
		3451
170	giacomo	3452	/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
		3453	*
		3454	* This is needed because rv605 don't use a normal multiplex, but a crosspoint
		3455	* switch instead (CD22M3494E). This IC can have multiple active connections
		3456	* between Xn (input) and Yn (output) pins. We need to clear any existing
		3457	* connection prior to establish a new one, pulsing the STROBE pin.
		3458	*
		3459	* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
		3460	* GPIO pins are wired as:
		3461	* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
		3462	* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
		3463	* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
		3464	* GPIO[8] - - P3[5] (microcontroler)
		3465	* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
		3466	* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
		3467	* GPINTR - - P3[4] (microcontroler)
		3468	*
		3469	* The microcontroler is a 80C32 like. It should be possible to change xpoint
		3470	* configuration either directly (as we are doing) or using the microcontroler
		3471	* which is also wired to I2C interface. I have no further info on the
		3472	* microcontroler features, one would need to disassembly the firmware.
		3473	* note: the vendor refused to give any information on this product, all
		3474	* that stuff was found using a multimeter! :)
		3475	*/
		3476	static void rv605_muxsel(struct bttv *btv, unsigned int input)
		3477	{
		3478	/* reset all conections */
428	giacomo	3479	btaor(0x200,~0x200, BT848_GPIO_DATA);
		3480	mdelay(1);
		3481	btaor(0x000,~0x200, BT848_GPIO_DATA);
		3482	mdelay(1);
170	giacomo	3483
		3484	/* create a new conection */
428	giacomo	3485	btaor(0x080,~0x480, BT848_GPIO_DATA);
		3486	btaor(0x480,~0x480, BT848_GPIO_DATA);
		3487	mdelay(1);
		3488	btaor(0x080,~0x480, BT848_GPIO_DATA);
		3489	mdelay(1);
170	giacomo	3490	}
		3491
428	giacomo	3492	// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
		3493	// video multiplexers to provide up to 16 video inputs. These
		3494	// multiplexers are controlled by the lower 8 GPIO pins of the
		3495	// bt878. The multiplexers probably Pericom PI5V331Q or similar.
170	giacomo	3496
428	giacomo	3497	// xxx0 is pin xxx of multiplexer U5,
		3498	// yyy1 is pin yyy of multiplexer U2
		3499
		3500	#define ENA0 0x01
		3501	#define ENB0 0x02
		3502	#define ENA1 0x04
		3503	#define ENB1 0x08
		3504
		3505	#define IN10 0x10
		3506	#define IN00 0x20
		3507	#define IN11 0x40
		3508	#define IN01 0x80
		3509
		3510	static void xguard_muxsel(struct bttv *btv, unsigned int input)
		3511	{
		3512	static const int masks[] = {
		3513	ENB0, ENB0\|IN00, ENB0\|IN10, ENB0\|IN00\|IN10,
		3514	ENA0, ENA0\|IN00, ENA0\|IN10, ENA0\|IN00\|IN10,
		3515	ENB1, ENB1\|IN01, ENB1\|IN11, ENB1\|IN01\|IN11,
		3516	ENA1, ENA1\|IN01, ENA1\|IN11, ENA1\|IN01\|IN11,
		3517	};
		3518	btwrite(masks[input%16], BT848_GPIO_DATA);
		3519	}
		3520
		3521	/*
		3522	* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
		3523	*
		3524	* The IVC120G security card has 4 i2c controlled TDA8540 matrix
		3525	* swichers to provide 16 channels to MUX0. The TDA8540's have
		3526	* 4 indepedant outputs and as such the IVC120G also has the
		3527	* optional "Monitor Out" bus. This allows the card to be looking
		3528	* at one input while the monitor is looking at another.
		3529	*
		3530	* Since I've couldn't be bothered figuring out how to add an
		3531	* independant muxsel for the monitor bus, I've just set it to
		3532	* whatever the card is looking at.
		3533	*
		3534	* OUT0 of the TDA8540's is connected to MUX0 (0x03)
		3535	* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
		3536	*
		3537	* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
		3538	* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
		3539	* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
		3540	* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
		3541	*
		3542	*/
		3543
		3544	/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
		3545	#define I2C_TDA8540 0x90
		3546	#define I2C_TDA8540_ALT1 0x92
		3547	#define I2C_TDA8540_ALT2 0x94
		3548	#define I2C_TDA8540_ALT3 0x96
		3549	#define I2C_TDA8540_ALT4 0x98
		3550	#define I2C_TDA8540_ALT5 0x9a
		3551	#define I2C_TDA8540_ALT6 0x9c
		3552
		3553	static void ivc120_muxsel(struct bttv *btv, unsigned int input)
		3554	{
		3555	// Simple maths
		3556	int key = input % 4;
		3557	int matrix = input / 4;
		3558
		3559	dprintk("bttv%d: ivc120_muxsel: Input - %02d \| TDA - %02d \| In - %02d\n",
		3560	btv->nr, input, matrix, key);
		3561
		3562	// Handles the input selection on the TDA8540's
		3563	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
		3564	((matrix == 3) ? (key \| key << 2) : 0x00), 1);
		3565	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
		3566	((matrix == 0) ? (key \| key << 2) : 0x00), 1);
		3567	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
		3568	((matrix == 1) ? (key \| key << 2) : 0x00), 1);
		3569	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
		3570	((matrix == 2) ? (key \| key << 2) : 0x00), 1);
		3571
		3572	// Handles the output enables on the TDA8540's
		3573	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
		3574	((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
		3575	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
		3576	((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
		3577	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
		3578	((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
		3579	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
		3580	((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
		3581
		3582	// Selects MUX0 for input on the 878
		3583	btaor((0)<<5, ~(3<<5), BT848_IFORM);
		3584	}
		3585
		3586
170	giacomo	3587	/* ----------------------------------------------------------------------- */
		3588	/* motherboard chipset specific stuff */
		3589
428	giacomo	3590	void __devinit bttv_check_chipset(void)
170	giacomo	3591	{
		3592	int pcipci_fail = 0;
428	giacomo	3593	struct pci_dev *dev = NULL;
170	giacomo	3594
428	giacomo	3595	if (pci_pci_problems & PCIPCI_FAIL)
		3596	pcipci_fail = 1;
		3597	if (pci_pci_problems & (PCIPCI_TRITON\|PCIPCI_NATOMA\|PCIPCI_VIAETBF))
		3598	triton1 = 1;
		3599	if (pci_pci_problems & PCIPCI_VSFX)
		3600	vsfx = 1;
		3601	#ifdef PCIPCI_ALIMAGIK
		3602	if (pci_pci_problems & PCIPCI_ALIMAGIK)
		3603	latency = 0x0A;
		3604	#endif
		3605
		3606	#if 0
		3607	/* print which chipset we have */
		3608	while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
		3609	printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
		3610	#endif
		3611
170	giacomo	3612	/* print warnings about any quirks found */
		3613	if (triton1)
		3614	printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
		3615	if (vsfx)
		3616	printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
		3617	if (pcipci_fail) {
		3618	printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
428	giacomo	3619	if (UNSET == no_overlay) {
170	giacomo	3620	printk(KERN_WARNING "bttv: going to disable overlay.\n");
		3621	no_overlay = 1;
		3622	}
		3623	}
428	giacomo	3624	if (UNSET != latency)
		3625	printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
170	giacomo	3626
428	giacomo	3627	while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
		3628	PCI_DEVICE_ID_INTEL_82441, dev))) {
170	giacomo	3629	unsigned char b;
428	giacomo	3630	pci_read_config_byte(dev, 0x53, &b);
170	giacomo	3631	if (bttv_debug)
		3632	printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
		3633	"bufcon=0x%02x\n",b);
		3634	}
		3635	}
		3636
428	giacomo	3637	int __devinit bttv_handle_chipset(struct bttv *btv)
170	giacomo	3638	{
		3639	unsigned char command;
		3640
428	giacomo	3641	if (!triton1 && !vsfx && UNSET == latency)
170	giacomo	3642	return 0;
		3643
		3644	if (bttv_verbose) {
		3645	if (triton1)
		3646	printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
		3647	if (vsfx && btv->id >= 878)
		3648	printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
428	giacomo	3649	if (UNSET != latency)
		3650	printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
		3651	btv->nr,latency);
170	giacomo	3652	}
		3653
		3654	if (btv->id < 878) {
		3655	/* bt848 (mis)uses a bit in the irq mask for etbf */
		3656	if (triton1)
		3657	btv->triton1 = BT848_INT_ETBF;
		3658	} else {
		3659	/* bt878 has a bit in the pci config space for it */
		3660	pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
		3661	if (triton1)
		3662	command \|= BT878_EN_TBFX;
		3663	if (vsfx)
		3664	command \|= BT878_EN_VSFX;
		3665	pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
		3666	}
428	giacomo	3667	if (UNSET != latency)
		3668	pci_write_config_byte(btv->dev, PCI_LATENCY_TIMER, latency);
170	giacomo	3669	return 0;
		3670	}
		3671
428	giacomo	3672
		3673	/*
		3674	* Local variables:
		3675	* c-basic-offset: 8
		3676	* End:
		3677	*/

Subversion Repositories shark

(root)/shark/trunk/drivers/bttv/bttv-cards.c - Rev 428