WebSVN - shark - Blame - Rev 667 - /shark/trunk/drivers/bttv/bttv-cards.c

Rev	Author	Line No.	Line
170	giacomo	1	/*
		2	bttv-cards.c
		3
		4	this file has configuration informations - card-specific stuff
		5	like the big tvcards array for the most part
		6
		7	Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
		8	& Marcus Metzler (mocm@thp.uni-koeln.de)
		9	(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
		10
		11	This program is free software; you can redistribute it and/or modify
		12	it under the terms of the GNU General Public License as published by
		13	the Free Software Foundation; either version 2 of the License, or
		14	(at your option) any later version.
		15
		16	This program is distributed in the hope that it will be useful,
		17	but WITHOUT ANY WARRANTY; without even the implied warranty of
		18	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		19	GNU General Public License for more details.
		20
		21	You should have received a copy of the GNU General Public License
		22	along with this program; if not, write to the Free Software
		23	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
428	giacomo	24
170	giacomo	25	*/
		26
428	giacomo	27	#include <linuxcomp.h>
170	giacomo	28
428	giacomo	29	#include <linux/config.h>
		30	#include <linux/delay.h>
		31	#include <linux/module.h>
		32	#include <linux/kmod.h>
		33	#include <linux/init.h>
170	giacomo	34	#include <linux/pci.h>
428	giacomo	35	#include <linux/vmalloc.h>
		36	#ifdef CONFIG_FW_LOADER
		37	# include <linux/firmware.h>
		38	#endif
170	giacomo	39
428	giacomo	40	#include <asm/io.h>
170	giacomo	41
428	giacomo	42	#include "drivers/bttvp.h"
		43	#include "drivers/bt832.h"
		44
170	giacomo	45	/* fwd decl */
		46	static void boot_msp34xx(struct bttv *btv, int pin);
428	giacomo	47	static void boot_bt832(struct bttv *btv);
170	giacomo	48	static void hauppauge_eeprom(struct bttv *btv);
428	giacomo	49	static void avermedia_eeprom(struct bttv *btv);
170	giacomo	50	static void osprey_eeprom(struct bttv *btv);
428	giacomo	51	static void modtec_eeprom(struct bttv *btv);
170	giacomo	52	static void init_PXC200(struct bttv *btv);
		53
		54	static void winview_audio(struct bttv btv, struct video_audio v, int set);
		55	static void lt9415_audio(struct bttv btv, struct video_audio v, int set);
		56	static void avermedia_tvphone_audio(struct bttv btv, struct video_audio v,
		57	int set);
		58	static void terratv_audio(struct bttv btv, struct video_audio v, int set);
		59	static void gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set);
		60	static void winfast2000_audio(struct bttv btv, struct video_audio v, int set);
		61	static void pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set);
		62	static void fv2000s_audio(struct bttv btv, struct video_audio v, int set);
		63	static void windvr_audio(struct bttv btv, struct video_audio v, int set);
428	giacomo	64	static void adtvk503_audio(struct bttv btv, struct video_audio v, int set);
170	giacomo	65	static void rv605_muxsel(struct bttv *btv, unsigned int input);
428	giacomo	66	static void eagle_muxsel(struct bttv *btv, unsigned int input);
		67	static void xguard_muxsel(struct bttv *btv, unsigned int input);
		68	static void ivc120_muxsel(struct bttv *btv, unsigned int input);
170	giacomo	69
428	giacomo	70	static int terratec_active_radio_upgrade(struct bttv *btv);
		71	static int tea5757_read(struct bttv *btv);
		72	static int tea5757_write(struct bttv *btv, int value);
		73	static void identify_by_eeprom(struct bttv *btv,
		74	unsigned char eeprom_data[256]);
		75
170	giacomo	76	/* config variables */
428	giacomo	77	static unsigned int triton1=0;
		78	static unsigned int vsfx=0;
		79	static unsigned int latency = UNSET;
		80	unsigned int no_overlay=-1;
170	giacomo	81
428	giacomo	82	static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		83	static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		84	static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		85	static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
		86	#ifdef MODULE
		87	static unsigned int autoload = 1;
		88	#else
		89	static unsigned int autoload = 0;
		90	#endif
		91	static unsigned int gpiomask = UNSET;
		92	static unsigned int audioall = UNSET;
		93	static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
		94
		95	/* insmod options */
		96	MODULE_PARM(triton1,"i");
		97	MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
		98	"[enable bug compatibility for triton1 + others]");
		99	MODULE_PARM(vsfx,"i");
		100	MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
		101	"[yet another chipset flaw workaround]");
		102	MODULE_PARM(no_overlay,"i");
		103	MODULE_PARM(latency,"i");
		104	MODULE_PARM_DESC(latency,"pci latency timer");
		105	MODULE_PARM(card,"1-" __stringify(BTTV_MAX) "i");
		106	MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
		107	MODULE_PARM(pll,"1-" __stringify(BTTV_MAX) "i");
		108	MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
		109	MODULE_PARM(tuner,"1-" __stringify(BTTV_MAX) "i");
		110	MODULE_PARM_DESC(tuner,"specify installed tuner type");
		111	MODULE_PARM(autoload,"i");
		112	MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
		113	MODULE_PARM(gpiomask,"i");
		114	MODULE_PARM(audioall,"i");
		115	MODULE_PARM(audiomux,"1-5i");
		116
		117	/* kernel args */
		118	#ifndef MODULE
		119	static int __init p_card(char *str) { return bttv_parse(str,BTTV_MAX,card); }
		120	static int __init p_pll(char *str) { return bttv_parse(str,BTTV_MAX,pll); }
		121	static int __init p_tuner(char *str) { return bttv_parse(str,BTTV_MAX,tuner); }
		122	__setup("bttv.card=", p_card);
		123	__setup("bttv.pll=", p_pll);
		124	__setup("bttv.tuner=", p_tuner);
		125
		126	int __init bttv_parse(char str, int max, int vals)
		127	{
		128	int i,number,res = 2;
		129
		130	for (i = 0; res == 2 && i < max; i++) {
		131	res = get_option(&str,&number);
		132	if (res)
		133	vals[i] = number;
		134	}
		135	return 1;
		136	}
		137	#endif
		138
170	giacomo	139	/* ----------------------------------------------------------------------- */
		140	/* list of card IDs for bt878+ cards */
		141
		142	static struct CARD {
		143	unsigned id;
		144	int cardnr;
		145	char *name;
428	giacomo	146	} cards[] __devinitdata = {
170	giacomo	147	{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
		148	{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
428	giacomo	149	{ 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
170	giacomo	150	{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
		151	{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
428	giacomo	152	{ 0xff020070, BTTV_OSPREY500, "Osprey-500" },
170	giacomo	153	{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
428	giacomo	154	{ 0xff040070, BTTV_OSPREY540, "Osprey-540" },
170	giacomo	155	{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
		156	{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
		157	{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
428	giacomo	158	{ 0x6607107d, BTTV_WINFAST2000, "Leadtek WinFast VC 100" },
		159	{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
		160	{ 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
170	giacomo	161	{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
		162	{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
428	giacomo	163	{ 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
170	giacomo	164	{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
428	giacomo	165	{ 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
		166	{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
		167	{ 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
170	giacomo	168	{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
428	giacomo	169	{ 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
170	giacomo	170	{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
		171	{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
		172	{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
428	giacomo	173	{ 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
170	giacomo	174	{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		175	{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
		176	{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
		177	{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
428	giacomo	178	{ 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
170	giacomo	179	{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
		180	{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
428	giacomo	181	{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
		182	{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
		183	{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
		184	{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
170	giacomo	185	{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
428	giacomo	186	{ 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
		187	{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
		188	{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
		189	{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
		190	{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
170	giacomo	191	{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
		192	{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		193	{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
		194	{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
428	giacomo	195	{ 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
		196	{ 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
		197	{ 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
		198	{ 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
		199	{ 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
		200	{ 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
		201	{ 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
		202	{ 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
		203	{ 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
		204	{ 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
		205	{ 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
		206	{ 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
		207	{ 0xa132ff00, BTTV_IVC100, "IVC-100" },
		208	{ 0xa1550000, BTTV_IVC200, "IVC-200" },
		209	{ 0xa1550001, BTTV_IVC200, "IVC-200" },
		210	{ 0xa1550002, BTTV_IVC200, "IVC-200" },
		211	{ 0xa1550003, BTTV_IVC200, "IVC-200" },
		212	{ 0xa1550100, BTTV_IVC200, "IVC-200G" },
		213	{ 0xa1550101, BTTV_IVC200, "IVC-200G" },
		214	{ 0xa1550102, BTTV_IVC200, "IVC-200G" },
		215	{ 0xa1550103, BTTV_IVC200, "IVC-200G" },
		216	{ 0xa182ff00, BTTV_IVC120, "IVC-120G" },
		217	{ 0xa182ff01, BTTV_IVC120, "IVC-120G" },
		218	{ 0xa182ff02, BTTV_IVC120, "IVC-120G" },
		219	{ 0xa182ff03, BTTV_IVC120, "IVC-120G" },
		220	{ 0xa182ff04, BTTV_IVC120, "IVC-120G" },
		221	{ 0xa182ff05, BTTV_IVC120, "IVC-120G" },
		222	{ 0xa182ff06, BTTV_IVC120, "IVC-120G" },
		223	{ 0xa182ff07, BTTV_IVC120, "IVC-120G" },
		224	{ 0xa182ff08, BTTV_IVC120, "IVC-120G" },
		225	{ 0xa182ff09, BTTV_IVC120, "IVC-120G" },
		226	{ 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
		227	{ 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
		228	{ 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
		229	{ 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
		230	{ 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
		231	{ 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
		232	{ 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
		233	{ 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
170	giacomo	234	{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
428	giacomo	235	{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
		236	{ 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
		237	{ 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
		238	{ 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
170	giacomo	239	{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
		240	{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
		241	{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
		242	{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
		243	{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
428	giacomo	244	{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
623	giacomo	245	{ 0x200A1295, BTTV_PXC200, "Imagenation PXC200"},
170	giacomo	246	{ 0, -1, NULL }
		247	};
		248
		249	/* ----------------------------------------------------------------------- */
		250	/* array with description for bt848 / bt878 tv/grabber cards */
		251
		252	struct tvcard bttv_tvcards[] = {
		253	{
		254	/* ---- card 0x00 ---------------------------------- */
428	giacomo	255	.name = " * UNKNOWN/GENERIC * ",
		256	.video_inputs = 4,
		257	.audio_inputs = 1,
		258	.tuner = 0,
		259	.svhs = 2,
		260	.muxsel = { 2, 3, 1, 0},
		261	.tuner_type = -1,
170	giacomo	262	},{
428	giacomo	263	.name = "MIRO PCTV",
		264	.video_inputs = 4,
		265	.audio_inputs = 1,
		266	.tuner = 0,
		267	.svhs = 2,
		268	.gpiomask = 15,
		269	.muxsel = { 2, 3, 1, 1},
		270	.audiomux = { 2, 0, 0, 0, 10},
		271	.needs_tvaudio = 1,
		272	.tuner_type = -1,
170	giacomo	273	},{
428	giacomo	274	.name = "Hauppauge (bt848)",
		275	.video_inputs = 4,
		276	.audio_inputs = 1,
		277	.tuner = 0,
		278	.svhs = 2,
		279	.gpiomask = 7,
		280	.muxsel = { 2, 3, 1, 1},
		281	.audiomux = { 0, 1, 2, 3, 4},
		282	.needs_tvaudio = 1,
		283	.tuner_type = -1,
170	giacomo	284	},{
428	giacomo	285	.name = "STB, Gateway P/N 6000699 (bt848)",
		286	.video_inputs = 3,
		287	.audio_inputs = 1,
		288	.tuner = 0,
		289	.svhs = 2,
		290	.gpiomask = 7,
		291	.muxsel = { 2, 3, 1, 1},
		292	.audiomux = { 4, 0, 2, 3, 1},
		293	.no_msp34xx = 1,
		294	.needs_tvaudio = 1,
		295	.tuner_type = TUNER_PHILIPS_NTSC,
		296	.pll = PLL_28,
		297	.has_radio = 1,
170	giacomo	298	},{
		299
		300	/* ---- card 0x04 ---------------------------------- */
428	giacomo	301	.name = "Intel Create and Share PCI/ Smart Video Recorder III",
		302	.video_inputs = 4,
		303	.audio_inputs = 0,
		304	.tuner = -1,
		305	.svhs = 2,
		306	.gpiomask = 0,
		307	.muxsel = { 2, 3, 1, 1},
		308	.audiomux = { 0 },
		309	.needs_tvaudio = 0,
		310	.tuner_type = 4,
170	giacomo	311	},{
428	giacomo	312	.name = "Diamond DTV2000",
		313	.video_inputs = 4,
		314	.audio_inputs = 1,
		315	.tuner = 0,
		316	.svhs = 2,
		317	.gpiomask = 3,
		318	.muxsel = { 2, 3, 1, 0},
		319	.audiomux = { 0, 1, 0, 1, 3},
		320	.needs_tvaudio = 1,
		321	.tuner_type = -1,
170	giacomo	322	},{
428	giacomo	323	.name = "AVerMedia TVPhone",
		324	.video_inputs = 3,
		325	.audio_inputs = 1,
		326	.tuner = 0,
		327	.svhs = 3,
		328	.muxsel = { 2, 3, 1, 1},
		329	.gpiomask = 0x0f,
		330	.audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
170	giacomo	331	/* 0x04 for some cards ?? */
428	giacomo	332	.needs_tvaudio = 1,
		333	.tuner_type = -1,
		334	.audio_hook = avermedia_tvphone_audio,
170	giacomo	335	},{
428	giacomo	336	.name = "MATRIX-Vision MV-Delta",
		337	.video_inputs = 5,
		338	.audio_inputs = 1,
		339	.tuner = -1,
		340	.svhs = 3,
		341	.gpiomask = 0,
		342	.muxsel = { 2, 3, 1, 0, 0},
		343	.audiomux = {0 },
		344	.needs_tvaudio = 1,
		345	.tuner_type = -1,
170	giacomo	346	},{
		347
		348	/* ---- card 0x08 ---------------------------------- */
428	giacomo	349	.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
		350	.video_inputs = 4,
		351	.audio_inputs = 1,
		352	.tuner = 0,
		353	.svhs = 2,
		354	.gpiomask = 0xc00,
		355	.muxsel = { 2, 3, 1, 1},
		356	.audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
		357	.needs_tvaudio = 1,
		358	.pll = PLL_28,
		359	.tuner_type = -1,
170	giacomo	360	},{
428	giacomo	361	.name = "IMS/IXmicro TurboTV",
		362	.video_inputs = 3,
		363	.audio_inputs = 1,
		364	.tuner = 0,
		365	.svhs = 2,
		366	.gpiomask = 3,
		367	.muxsel = { 2, 3, 1, 1},
		368	.audiomux = { 1, 1, 2, 3, 0},
		369	.needs_tvaudio = 0,
		370	.pll = PLL_28,
		371	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	372	},{
428	giacomo	373	.name = "Hauppauge (bt878)",
		374	.video_inputs = 4,
		375	.audio_inputs = 1,
		376	.tuner = 0,
		377	.svhs = 2,
		378	.gpiomask = 0x0f, /* old: 7 */
		379	.muxsel = { 2, 0, 1, 1},
		380	.audiomux = { 0, 1, 2, 3, 4},
		381	.needs_tvaudio = 1,
		382	.pll = PLL_28,
		383	.tuner_type = -1,
170	giacomo	384	},{
428	giacomo	385	.name = "MIRO PCTV pro",
		386	.video_inputs = 3,
		387	.audio_inputs = 1,
		388	.tuner = 0,
		389	.svhs = 2,
		390	.gpiomask = 0x3014f,
		391	.muxsel = { 2, 3, 1, 1},
		392	.audiomux = { 0x20001,0x10001, 0, 0,10},
		393	.needs_tvaudio = 1,
		394	.tuner_type = -1,
170	giacomo	395	},{
		396
		397	/* ---- card 0x0c ---------------------------------- */
428	giacomo	398	.name = "ADS Technologies Channel Surfer TV (bt848)",
		399	.video_inputs = 3,
		400	.audio_inputs = 1,
		401	.tuner = 0,
		402	.svhs = 2,
		403	.gpiomask = 15,
		404	.muxsel = { 2, 3, 1, 1},
		405	.audiomux = { 13, 14, 11, 7, 0, 0},
		406	.needs_tvaudio = 1,
		407	.tuner_type = -1,
170	giacomo	408	},{
428	giacomo	409	.name = "AVerMedia TVCapture 98",
		410	.video_inputs = 3,
		411	.audio_inputs = 4,
		412	.tuner = 0,
		413	.svhs = 2,
		414	.gpiomask = 15,
		415	.muxsel = { 2, 3, 1, 1},
		416	.audiomux = { 13, 14, 11, 7, 0, 0},
		417	.needs_tvaudio = 1,
		418	.msp34xx_alt = 1,
		419	.pll = PLL_28,
		420	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	421	},{
428	giacomo	422	.name = "Aimslab Video Highway Xtreme (VHX)",
		423	.video_inputs = 3,
		424	.audio_inputs = 1,
		425	.tuner = 0,
		426	.svhs = 2,
		427	.gpiomask = 7,
		428	.muxsel = { 2, 3, 1, 1},
		429	.audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
		430	.needs_tvaudio = 1,
		431	.pll = PLL_28,
		432	.tuner_type = -1,
170	giacomo	433	},{
428	giacomo	434	.name = "Zoltrix TV-Max",
		435	.video_inputs = 3,
		436	.audio_inputs = 1,
		437	.tuner = 0,
		438	.svhs = 2,
		439	.gpiomask = 15,
		440	.muxsel = { 2, 3, 1, 1},
		441	.audiomux = {0 , 0, 1 , 0, 10},
		442	.needs_tvaudio = 1,
		443	.tuner_type = -1,
170	giacomo	444	},{
		445
		446	/* ---- card 0x10 ---------------------------------- */
428	giacomo	447	.name = "Prolink Pixelview PlayTV (bt878)",
		448	.video_inputs = 3,
		449	.audio_inputs = 1,
		450	.tuner = 0,
		451	.svhs = 2,
		452	.gpiomask = 0x01fe00,
		453	.muxsel = { 2, 3, 1, 1},
		454	.audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
		455	.needs_tvaudio = 1,
		456	.pll = PLL_28,
		457	.tuner_type = -1,
170	giacomo	458	},{
428	giacomo	459	.name = "Leadtek WinView 601",
		460	.video_inputs = 3,
		461	.audio_inputs = 1,
		462	.tuner = 0,
		463	.svhs = 2,
		464	.gpiomask = 0x8300f8,
		465	.muxsel = { 2, 3, 1, 1,0},
		466	.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
		467	.needs_tvaudio = 1,
		468	.tuner_type = -1,
		469	.audio_hook = winview_audio,
		470	.has_radio = 1,
170	giacomo	471	},{
428	giacomo	472	.name = "AVEC Intercapture",
		473	.video_inputs = 3,
		474	.audio_inputs = 2,
		475	.tuner = 0,
		476	.svhs = 2,
		477	.gpiomask = 0,
		478	.muxsel = {2, 3, 1, 1},
		479	.audiomux = {1, 0, 0, 0, 0},
		480	.needs_tvaudio = 1,
		481	.tuner_type = -1,
170	giacomo	482	},{
428	giacomo	483	.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
		484	.video_inputs = 4,
		485	.audio_inputs = 1,
		486	.tuner = -1,
		487	.svhs = -1,
		488	.gpiomask = 0x8dff00,
		489	.muxsel = { 2, 3, 1, 1},
		490	.audiomux = { 0 },
		491	.no_msp34xx = 1,
		492	.tuner_type = -1,
170	giacomo	493	},{
		494
		495	/* ---- card 0x14 ---------------------------------- */
428	giacomo	496	.name = "CEI Raffles Card",
		497	.video_inputs = 3,
		498	.audio_inputs = 3,
		499	.tuner = 0,
		500	.svhs = 2,
		501	.muxsel = {2, 3, 1, 1},
		502	.tuner_type = -1,
170	giacomo	503	},{
428	giacomo	504	.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
		505	.video_inputs = 4,
		506	.audio_inputs = 2, // tuner, line in
		507	.tuner = 0,
		508	.svhs = 2,
		509	.gpiomask = 0x1800,
		510	.muxsel = { 2, 3, 1, 1},
		511	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		512	.pll = PLL_28,
		513	.tuner_type = TUNER_PHILIPS_PAL_I,
170	giacomo	514	},{
428	giacomo	515	.name = "Askey CPH050/ Phoebe Tv Master + FM",
		516	.video_inputs = 3,
		517	.audio_inputs = 1,
		518	.tuner = 0,
		519	.svhs = 2,
		520	.gpiomask = 0xc00,
		521	.muxsel = { 2, 3, 1, 1},
		522	.audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
		523	.needs_tvaudio = 1,
		524	.pll = PLL_28,
		525	.tuner_type = -1,
170	giacomo	526	},{
428	giacomo	527	.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
		528	.video_inputs = 3,
		529	.audio_inputs = 1,
		530	.tuner = 0,
		531	.svhs = -1,
		532	.gpiomask = 7,
		533	.muxsel = { 2, 3, -1 },
		534	.digital_mode = DIGITAL_MODE_CAMERA,
		535	.audiomux = { 0, 0, 0, 0, 0 },
		536	.no_msp34xx = 1,
		537	.pll = PLL_28,
		538	.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
170	giacomo	539	},{
		540
		541	/* ---- card 0x18 ---------------------------------- */
428	giacomo	542	.name = "Askey CPH05X/06X (bt878) [many vendors]",
		543	.video_inputs = 3,
		544	.audio_inputs = 1,
		545	.tuner = 0,
		546	.svhs = 2,
		547	.gpiomask = 0xe00,
		548	.muxsel = { 2, 3, 1, 1},
		549	.audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
		550	.needs_tvaudio = 1,
		551	.pll = PLL_28,
		552	.tuner_type = -1,
170	giacomo	553	},{
428	giacomo	554	.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
		555	.video_inputs = 3,
		556	.audio_inputs = 1,
		557	.tuner = 0,
		558	.svhs = 2,
		559	.gpiomask = 0x1f0fff,
		560	.muxsel = { 2, 3, 1, 1},
		561	.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
		562	.needs_tvaudio = 0,
		563	.tuner_type = TUNER_PHILIPS_PAL,
		564	.audio_hook = terratv_audio,
170	giacomo	565	},{
428	giacomo	566	.name = "Hauppauge WinCam newer (bt878)",
		567	.video_inputs = 4,
		568	.audio_inputs = 1,
		569	.tuner = 0,
		570	.svhs = 3,
		571	.gpiomask = 7,
		572	.muxsel = { 2, 0, 1, 1},
		573	.audiomux = { 0, 1, 2, 3, 4},
		574	.needs_tvaudio = 1,
		575	.tuner_type = -1,
170	giacomo	576	},{
428	giacomo	577	.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
		578	.video_inputs = 4,
		579	.audio_inputs = 2,
		580	.tuner = 0,
		581	.svhs = 2,
		582	.gpiomask = 0x1800,
		583	.muxsel = { 2, 3, 1, 1},
		584	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		585	.pll = PLL_28,
		586	.tuner_type = TUNER_PHILIPS_SECAM,
170	giacomo	587	},{
		588
		589	/* ---- card 0x1c ---------------------------------- */
428	giacomo	590	.name = "Terratec TerraTV+ Version 1.1 (bt878)",
		591	.video_inputs = 3,
		592	.audio_inputs = 1,
		593	.tuner = 0,
		594	.svhs = 2,
		595	.gpiomask = 0x1f0fff,
		596	.muxsel = { 2, 3, 1, 1},
		597	.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
		598	.needs_tvaudio = 0,
		599	.tuner_type = TUNER_PHILIPS_PAL,
		600	.audio_hook = terratv_audio,
		601	/* GPIO wiring:
		602	External 20 pin connector (for Active Radio Upgrade board)
		603	gpio00: i2c-sda
		604	gpio01: i2c-scl
		605	gpio02: om5610-data
		606	gpio03: om5610-clk
		607	gpio04: om5610-wre
		608	gpio05: om5610-stereo
		609	gpio06: rds6588-davn
		610	gpio07: Pin 7 n.c.
		611	gpio08: nIOW
		612	gpio09+10: nIOR, nSEL ?? (bt878)
		613	gpio09: nIOR (bt848)
		614	gpio10: nSEL (bt848)
		615	Sound Routing:
		616	gpio16: u2-A0 (1st 4052bt)
		617	gpio17: u2-A1
		618	gpio18: u2-nEN
		619	gpio19: u4-A0 (2nd 4052)
		620	gpio20: u4-A1
		621	u4-nEN - GND
		622	Btspy:
		623	00000 : Cdrom (internal audio input)
		624	10000 : ext. Video audio input
		625	20000 : TV Mono
		626	a0000 : TV Mono/2
		627	1a0000 : TV Stereo
		628	30000 : Radio
		629	40000 : Mute
		630	*/
		631
170	giacomo	632	},{
		633	/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
428	giacomo	634	.name = "Imagenation PXC200",
		635	.video_inputs = 5,
		636	.audio_inputs = 1,
		637	.tuner = -1,
		638	.svhs = 1, /* was: 4 */
		639	.gpiomask = 0,
		640	.muxsel = { 2, 3, 1, 0, 0},
		641	.audiomux = { 0 },
		642	.needs_tvaudio = 1,
		643	.tuner_type = -1,
170	giacomo	644	},{
428	giacomo	645	.name = "Lifeview FlyVideo 98 LR50",
		646	.video_inputs = 4,
		647	.audio_inputs = 1,
		648	.tuner = 0,
		649	.svhs = 2,
		650	.gpiomask = 0x1800, //0x8dfe00
		651	.muxsel = { 2, 3, 1, 1},
		652	.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
		653	.pll = PLL_28,
		654	.tuner_type = -1,
170	giacomo	655	},{
428	giacomo	656	.name = "Formac iProTV, Formac ProTV I (bt848)",
		657	.video_inputs = 4,
		658	.audio_inputs = 1,
		659	.tuner = 0,
		660	.svhs = 3,
		661	.gpiomask = 1,
		662	.muxsel = { 2, 3, 1, 1},
		663	.audiomux = { 1, 0, 0, 0, 0 },
		664	.pll = PLL_28,
		665	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	666	},{
		667
		668	/* ---- card 0x20 ---------------------------------- */
428	giacomo	669	.name = "Intel Create and Share PCI/ Smart Video Recorder III",
		670	.video_inputs = 4,
		671	.audio_inputs = 0,
		672	.tuner = -1,
		673	.svhs = 2,
		674	.gpiomask = 0,
		675	.muxsel = { 2, 3, 1, 1},
		676	.audiomux = { 0 },
		677	.needs_tvaudio = 0,
		678	.tuner_type = 4,
170	giacomo	679	},{
428	giacomo	680	.name = "Terratec TerraTValue Version Bt878",
		681	.video_inputs = 3,
		682	.audio_inputs = 1,
		683	.tuner = 0,
		684	.svhs = 2,
		685	.gpiomask = 0xffff00,
		686	.muxsel = { 2, 3, 1, 1},
		687	.audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
		688	.needs_tvaudio = 1,
		689	.pll = PLL_28,
		690	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	691	},{
428	giacomo	692	.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
		693	.video_inputs = 4,
		694	.audio_inputs = 1,
		695	.tuner = 0,
		696	.svhs = 2,
		697	.gpiomask = 0xc33000,
		698	.muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
		699	.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000},
		700	/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
		701	gpio23 -- hef4052:nEnable (0x800000)
		702	gpio12 -- hef4052:A1
		703	gpio13 -- hef4052:A0
		704	0x0000: external audio
		705	0x1000: FM
		706	0x2000: TV
		707	0x3000: n.c.
		708	Note: There exists another variant "Winfast 2000" with tv stereo !?
		709	Note: eeprom only contains FF and pci subsystem id 107d:6606
		710	*/
		711	.needs_tvaudio = 0,
		712	.pll = PLL_28,
		713	.has_radio = 1,
		714	.tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
		715	.audio_hook = winfast2000_audio,
170	giacomo	716	},{
428	giacomo	717	.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
		718	.video_inputs = 4,
		719	.audio_inputs = 3,
		720	.tuner = 0,
		721	.svhs = 2,
		722	.gpiomask = 0x1800,
		723	.muxsel = { 2, 3, 1, 1},
		724	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
		725	.pll = PLL_28,
		726	.tuner_type = -1,
170	giacomo	727	},{
		728
		729	/* ---- card 0x24 ---------------------------------- */
428	giacomo	730	.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
		731	.video_inputs = 4,
		732	.audio_inputs = 3,
		733	.tuner = 0,
		734	.svhs = 2,
		735	.gpiomask = 0x1800,
		736	.muxsel = { 2, 3, 1, 1},
		737	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		738	.pll = PLL_28,
		739	.tuner_type = -1,
		740	.has_radio = 1,
170	giacomo	741	},{
428	giacomo	742	.name = "Prolink PixelView PlayTV pro",
		743	.video_inputs = 3,
		744	.audio_inputs = 1,
		745	.tuner = 0,
		746	.svhs = 2,
		747	.gpiomask = 0xff,
		748	.muxsel = { 2, 3, 1, 1 },
		749	.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
		750	.no_msp34xx = 1,
		751	.pll = PLL_28,
		752	.tuner_type = -1,
170	giacomo	753	},{
428	giacomo	754	.name = "Askey CPH06X TView99",
		755	.video_inputs = 4,
		756	.audio_inputs = 1,
		757	.tuner = 0,
		758	.svhs = 2,
		759	.gpiomask = 0x551e00,
		760	.muxsel = { 2, 3, 1, 0},
		761	.audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
		762	.needs_tvaudio = 1,
		763	.pll = PLL_28,
		764	.tuner_type = 1,
170	giacomo	765	},{
428	giacomo	766	.name = "Pinnacle PCTV Studio/Rave",
		767	.video_inputs = 3,
		768	.audio_inputs = 1,
		769	.tuner = 0,
		770	.svhs = 2,
		771	.gpiomask = 0x03000F,
		772	.muxsel = { 2, 3, 1, 1},
		773	.audiomux = { 2, 0, 0, 0, 1},
		774	.needs_tvaudio = 1,
		775	.pll = PLL_28,
		776	.tuner_type = -1,
170	giacomo	777	},{
		778
		779	/* ---- card 0x28 ---------------------------------- */
428	giacomo	780	.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
		781	.video_inputs = 3,
		782	.audio_inputs = 1,
		783	.tuner = 0,
		784	.svhs = 2,
		785	.gpiomask = 7,
		786	.muxsel = { 2, 3, 1, 1},
		787	.audiomux = { 4, 0, 2, 3, 1},
		788	.no_msp34xx = 1,
		789	.needs_tvaudio = 1,
		790	.tuner_type = TUNER_PHILIPS_NTSC,
		791	.pll = PLL_28,
		792	.has_radio = 1,
170	giacomo	793	},{
428	giacomo	794	.name = "AVerMedia TVPhone 98",
		795	.video_inputs = 3,
		796	.audio_inputs = 4,
		797	.tuner = 0,
		798	.svhs = 2,
		799	.gpiomask = 15,
		800	.muxsel = { 2, 3, 1, 1},
		801	.audiomux = { 13, 4, 11, 7, 0, 0},
		802	.needs_tvaudio = 1,
		803	.pll = PLL_28,
		804	.tuner_type = -1,
		805	.has_radio = 1,
		806	.audio_hook = avermedia_tvphone_audio,
170	giacomo	807	},{
428	giacomo	808	.name = "ProVideo PV951", /* pic16c54 */
		809	.video_inputs = 3,
		810	.audio_inputs = 1,
		811	.tuner = 0,
		812	.svhs = 2,
		813	.gpiomask = 0,
		814	.muxsel = { 2, 3, 1, 1},
		815	.audiomux = { 0, 0, 0, 0, 0},
		816	.needs_tvaudio = 1,
		817	.no_msp34xx = 1,
		818	.pll = PLL_28,
		819	.tuner_type = 1,
170	giacomo	820	},{
428	giacomo	821	.name = "Little OnAir TV",
		822	.video_inputs = 3,
		823	.audio_inputs = 1,
		824	.tuner = 0,
		825	.svhs = 2,
		826	.gpiomask = 0xe00b,
		827	.muxsel = {2, 3, 1, 1},
		828	.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
		829	.no_msp34xx = 1,
		830	.tuner_type = -1,
170	giacomo	831	},{
		832
		833	/* ---- card 0x2c ---------------------------------- */
428	giacomo	834	.name = "Sigma TVII-FM",
		835	.video_inputs = 2,
		836	.audio_inputs = 1,
		837	.tuner = 0,
		838	.svhs = -1,
		839	.gpiomask = 3,
		840	.muxsel = {2, 3, 1, 1},
		841	.audiomux = {1, 1, 0, 2, 3},
		842	.no_msp34xx = 1,
		843	.pll = PLL_NONE,
		844	.tuner_type = -1,
170	giacomo	845	},{
428	giacomo	846	.name = "MATRIX-Vision MV-Delta 2",
		847	.video_inputs = 5,
		848	.audio_inputs = 1,
		849	.tuner = -1,
		850	.svhs = 3,
		851	.gpiomask = 0,
		852	.muxsel = { 2, 3, 1, 0, 0},
		853	.audiomux = {0 },
		854	.no_msp34xx = 1,
		855	.pll = PLL_28,
		856	.tuner_type = -1,
170	giacomo	857	},{
428	giacomo	858	.name = "Zoltrix Genie TV/FM",
		859	.video_inputs = 3,
		860	.audio_inputs = 1,
		861	.tuner = 0,
		862	.svhs = 2,
		863	.gpiomask = 0xbcf03f,
		864	.muxsel = { 2, 3, 1, 1},
		865	.audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
		866	.no_msp34xx = 1,
		867	.pll = PLL_28,
		868	.tuner_type = 21,
170	giacomo	869	},{
428	giacomo	870	.name = "Terratec TV/Radio+",
		871	.video_inputs = 3,
		872	.audio_inputs = 1,
		873	.tuner = 0,
		874	.svhs = 2,
		875	.gpiomask = 0x70000,
		876	.muxsel = { 2, 3, 1, 1},
		877	.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
		878	.needs_tvaudio = 1,
		879	.no_msp34xx = 1,
		880	.pll = PLL_35,
		881	.tuner_type = 1,
		882	.has_radio = 1,
170	giacomo	883	},{
		884
		885	/* ---- card 0x30 ---------------------------------- */
428	giacomo	886	.name = "Askey CPH03x/ Dynalink Magic TView",
		887	.video_inputs = 3,
		888	.audio_inputs = 1,
		889	.tuner = 0,
		890	.svhs = 2,
		891	.gpiomask = 15,
		892	.muxsel = { 2, 3, 1, 1},
		893	.audiomux = {2,0,0,0,1},
		894	.needs_tvaudio = 1,
		895	.pll = PLL_28,
		896	.tuner_type = -1,
170	giacomo	897	},{
428	giacomo	898	.name = "IODATA GV-BCTV3/PCI",
		899	.video_inputs = 3,
		900	.audio_inputs = 1,
		901	.tuner = 0,
		902	.svhs = 2,
		903	.gpiomask = 0x010f00,
		904	.muxsel = {2, 3, 0, 0},
		905	.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
		906	.no_msp34xx = 1,
		907	.pll = PLL_28,
		908	.tuner_type = TUNER_ALPS_TSHC6_NTSC,
		909	.audio_hook = gvbctv3pci_audio,
170	giacomo	910	},{
428	giacomo	911	.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
		912	.video_inputs = 5,
		913	.audio_inputs = 1,
		914	.tuner = 0,
		915	.svhs = 3,
		916	.gpiomask = 0xAA0000,
		917	.muxsel = { 2,3,1,1,-1 },
		918	.digital_mode = DIGITAL_MODE_CAMERA,
		919	.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
		920	.no_msp34xx = 1,
		921	.pll = PLL_28,
		922	.tuner_type = TUNER_PHILIPS_PAL_I,
		923	/* GPIO wiring: (different from Rev.4C !)
		924	GPIO17: U4.A0 (first hef4052bt)
		925	GPIO19: U4.A1
		926	GPIO20: U5.A1 (second hef4052bt)
		927	GPIO21: U4.nEN
		928	GPIO22: BT832 Reset Line
		929	GPIO23: A5,A0, U5,nEN
		930	Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
		931	*/
170	giacomo	932	},{
428	giacomo	933	.name = "Eagle Wireless Capricorn2 (bt878A)",
		934	.video_inputs = 4,
		935	.audio_inputs = 1,
		936	.tuner = 0,
		937	.svhs = 2,
		938	.gpiomask = 7,
		939	.muxsel = { 2, 0, 1, 1},
		940	.audiomux = { 0, 1, 2, 3, 4},
		941	.pll = PLL_28,
		942	.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
170	giacomo	943	},{
		944
		945	/* ---- card 0x34 ---------------------------------- */
428	giacomo	946	/* David H�rdeman <david@2gen.com> */
		947	.name = "Pinnacle PCTV Studio Pro",
		948	.video_inputs = 4,
		949	.audio_inputs = 1,
		950	.tuner = 0,
		951	.svhs = 3,
		952	.gpiomask = 0x03000F,
		953	.muxsel = { 2, 3, 1, 1},
		954	.audiomux = { 1, 0xd0001, 0, 0, 10},
		955	/* sound path (5 sources):
		956	MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
		957	0= ext. Audio IN
		958	1= from MUX2
		959	2= Mono TV sound from Tuner
		960	3= not connected
		961	MUX2 (mask 0x30000):
		962	0,2,3= from MSP34xx
		963	1= FM stereo Radio from Tuner */
		964	.needs_tvaudio = 1,
		965	.pll = PLL_28,
		966	.tuner_type = -1,
170	giacomo	967	},{
		968	/* Claas Langbehn <claas@bigfoot.com>,
		969	Sven Grothklags <sven@upb.de> */
428	giacomo	970	.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
		971	.video_inputs = 3,
		972	.audio_inputs = 3,
		973	.tuner = 0,
		974	.svhs = 2,
		975	.gpiomask = 0x1c,
		976	.muxsel = { 2, 3, 1, 1},
		977	.audiomux = { 0, 0, 0x10, 8, 4 },
		978	.needs_tvaudio = 1,
		979	.pll = PLL_28,
		980	.tuner_type = TUNER_PHILIPS_PAL_I,
		981	.has_radio = 1,
170	giacomo	982	},{
428	giacomo	983	/* Tim R�stermundt <rosterm@uni-muenster.de>
170	giacomo	984	in de.comp.os.unix.linux.hardware:
		985	options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
		986	audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
		987	options tuner type=5 */
428	giacomo	988	.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
		989	.video_inputs = 4,
		990	.audio_inputs = 1,
		991	.tuner = 0,
		992	.svhs = 2,
		993	.gpiomask = 0x18e0,
		994	.muxsel = { 2, 3, 1, 1},
		995	.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
		996	/* For cards with tda9820/tda9821:
		997	0x0000: Tuner normal stereo
170	giacomo	998	0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
		999	0x0880: Tuner A2 stereo */
428	giacomo	1000	.pll = PLL_28,
		1001	.tuner_type = -1,
170	giacomo	1002	},{
		1003	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		1004	old Easy TV BT848 version (model CPH031) */
428	giacomo	1005	.name = "Askey CPH031/ BESTBUY Easy TV",
		1006	.video_inputs = 4,
		1007	.audio_inputs = 1,
		1008	.tuner = 0,
		1009	.svhs = 2,
		1010	.gpiomask = 0xF,
		1011	.muxsel = { 2, 3, 1, 0},
		1012	.audiomux = { 2, 0, 0, 0, 10},
		1013	.needs_tvaudio = 0,
		1014	.pll = PLL_28,
		1015	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	1016	},{
		1017
		1018	/* ---- card 0x38 ---------------------------------- */
		1019	/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
428	giacomo	1020	.name = "Lifeview FlyVideo 98FM LR50",
		1021	.video_inputs = 4,
		1022	.audio_inputs = 3,
		1023	.tuner = 0,
		1024	.svhs = 2,
		1025	.gpiomask = 0x1800,
		1026	.muxsel = { 2, 3, 1, 1},
		1027	.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
		1028	.pll = PLL_28,
		1029	.tuner_type = 5,
170	giacomo	1030	},{
		1031	/* This is the ultimate cheapo capture card
		1032	* just a BT848A on a small PCB!
		1033	* Steve Hosgood <steve@equiinet.com> */
428	giacomo	1034	.name = "GrandTec 'Grand Video Capture' (Bt848)",
		1035	.video_inputs = 2,
		1036	.audio_inputs = 0,
		1037	.tuner = -1,
		1038	.svhs = 1,
		1039	.gpiomask = 0,
		1040	.muxsel = { 3, 1 },
		1041	.audiomux = { 0 },
		1042	.needs_tvaudio = 0,
		1043	.no_msp34xx = 1,
		1044	.pll = PLL_35,
		1045	.tuner_type = -1,
170	giacomo	1046	},{
		1047	/* Daniel Herrington <daniel.herrington@home.com> */
428	giacomo	1048	.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
		1049	.video_inputs = 3,
		1050	.audio_inputs = 1,
		1051	.tuner = 0,
		1052	.svhs = 2,
		1053	.gpiomask = 0xe00,
		1054	.muxsel = { 2, 3, 1, 1},
		1055	.audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
		1056	.needs_tvaudio = 1,
		1057	.pll = PLL_28,
		1058	.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
170	giacomo	1059	},{
		1060	/* Matti Mottus <mottus@physic.ut.ee> */
428	giacomo	1061	.name = "Askey CPH03x TV Capturer",
		1062	.video_inputs = 4,
		1063	.audio_inputs = 1,
		1064	.tuner = 0,
		1065	.svhs = 2,
		1066	.gpiomask = 0x03000F,
		1067	.muxsel = { 2, 3, 1, 0},
		1068	.audiomux = { 2,0,0,0,1 },
		1069	.pll = PLL_28,
		1070	.tuner_type = 0,
170	giacomo	1071	},{
		1072
		1073	/* ---- card 0x3c ---------------------------------- */
		1074	/* Philip Blundell <philb@gnu.org> */
428	giacomo	1075	.name = "Modular Technology MM100PCTV",
		1076	.video_inputs = 2,
		1077	.audio_inputs = 2,
		1078	.tuner = 0,
		1079	.svhs = -1,
		1080	.gpiomask = 11,
		1081	.muxsel = { 2, 3, 1, 1},
		1082	.audiomux = { 2, 0, 0, 1, 8},
		1083	.pll = PLL_35,
		1084	.tuner_type = TUNER_TEMIC_PAL,
170	giacomo	1085
		1086	},{
		1087	/* Adrian Cox <adrian@humboldt.co.uk */
428	giacomo	1088	.name = "AG Electronics GMV1",
		1089	.video_inputs = 2,
		1090	.audio_inputs = 0,
		1091	.tuner = -1,
		1092	.svhs = 1,
		1093	.gpiomask = 0xF,
		1094	.muxsel = { 2, 2},
		1095	.audiomux = { },
		1096	.no_msp34xx = 1,
		1097	.needs_tvaudio = 0,
		1098	.pll = PLL_28,
		1099	.tuner_type = -1,
170	giacomo	1100	},{
		1101	/* Miguel Angel Alvarez <maacruz@navegalia.com>
		1102	new Easy TV BT878 version (model CPH061)
		1103	special thanks to Informatica Mieres for providing the card */
428	giacomo	1104	.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
		1105	.video_inputs = 3,
		1106	.audio_inputs = 2,
		1107	.tuner = 0,
		1108	.svhs = 2,
		1109	.gpiomask = 0xFF,
		1110	.muxsel = { 2, 3, 1, 0},
		1111	.audiomux = { 1, 0, 4, 4, 9},
		1112	.needs_tvaudio = 0,
		1113	.pll = PLL_28,
		1114	.tuner_type = TUNER_PHILIPS_PAL,
170	giacomo	1115	},{
		1116	/* Lukas Gebauer <geby@volny.cz> */
428	giacomo	1117	.name = "ATI TV-Wonder",
		1118	.video_inputs = 3,
		1119	.audio_inputs = 1,
		1120	.tuner = 0,
		1121	.svhs = 2,
		1122	.gpiomask = 0xf03f,
		1123	.muxsel = { 2, 3, 1, 0 },
		1124	.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
		1125	.pll = PLL_28,
		1126	.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
170	giacomo	1127	},{
		1128
		1129	/* ---- card 0x40 ---------------------------------- */
		1130	/* Lukas Gebauer <geby@volny.cz> */
428	giacomo	1131	.name = "ATI TV-Wonder VE",
		1132	.video_inputs = 2,
		1133	.audio_inputs = 1,
		1134	.tuner = 0,
		1135	.svhs = -1,
		1136	.gpiomask = 1,
		1137	.muxsel = { 2, 3, 0, 1},
		1138	.audiomux = { 0, 0, 1, 0, 0},
		1139	.no_msp34xx = 1,
		1140	.pll = PLL_28,
		1141	.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
170	giacomo	1142	},{
		1143	/* DeeJay <deejay@westel900.net (2000S) */
428	giacomo	1144	.name = "Lifeview FlyVideo 2000S LR90",
		1145	.video_inputs = 3,
		1146	.audio_inputs = 3,
		1147	.tuner = 0,
		1148	.svhs = 2,
		1149	.gpiomask = 0x18e0,
		1150	.muxsel = { 2, 3, 0, 1},
170	giacomo	1151	/* Radio changed from 1e80 to 0x800 to make
428	giacomo	1152	FlyVideo2000S in .hu happy (gm)*/
170	giacomo	1153	/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
428	giacomo	1154	.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
		1155	.audio_hook = fv2000s_audio,
		1156	.no_msp34xx = 1,
		1157	.no_tda9875 = 1,
		1158	.needs_tvaudio = 1,
		1159	.pll = PLL_28,
		1160	.tuner_type = 5,
170	giacomo	1161	},{
428	giacomo	1162	.name = "Terratec TValueRadio",
		1163	.video_inputs = 3,
		1164	.audio_inputs = 1,
		1165	.tuner = 0,
		1166	.svhs = 2,
		1167	.gpiomask = 0xffff00,
		1168	.muxsel = { 2, 3, 1, 1},
		1169	.audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
		1170	.needs_tvaudio = 1,
		1171	.pll = PLL_28,
		1172	.tuner_type = TUNER_PHILIPS_PAL,
		1173	.has_radio = 1,
170	giacomo	1174	},{
		1175	/* TANAKA Kei <peg00625@nifty.com> */
428	giacomo	1176	.name = "IODATA GV-BCTV4/PCI",
		1177	.video_inputs = 3,
		1178	.audio_inputs = 1,
		1179	.tuner = 0,
		1180	.svhs = 2,
		1181	.gpiomask = 0x010f00,
		1182	.muxsel = {2, 3, 0, 0},
		1183	.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
		1184	.no_msp34xx = 1,
		1185	.pll = PLL_28,
		1186	.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
		1187	.audio_hook = gvbctv3pci_audio,
170	giacomo	1188	},{
		1189
		1190	/* ---- card 0x44 ---------------------------------- */
428	giacomo	1191	.name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
170	giacomo	1192	// try "insmod msp3400 simple=0" if you have
		1193	// sound problems with this card.
428	giacomo	1194	.video_inputs = 4,
		1195	.audio_inputs = 1,
		1196	.tuner = 0,
		1197	.svhs = -1,
		1198	.gpiomask = 0x4f8a00,
170	giacomo	1199	// 0x100000: 1=MSP enabled (0=disable again)
		1200	// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
428	giacomo	1201	.audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
170	giacomo	1202	// tvtuner, radio, external,internal, mute, stereo
		1203	/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
428	giacomo	1204	.muxsel = { 2, 3 ,0 ,1},
		1205	.tuner_type = TUNER_MT2032,
		1206	.pll = PLL_28,
		1207	.has_radio = 1,
170	giacomo	1208	},{
		1209	/* Philip Blundell <pb@nexus.co.uk> */
428	giacomo	1210	.name = "Active Imaging AIMMS",
		1211	.video_inputs = 1,
		1212	.audio_inputs = 0,
		1213	.tuner = -1,
		1214	.tuner_type = -1,
		1215	.pll = PLL_28,
		1216	.muxsel = { 2 },
		1217	.gpiomask = 0
170	giacomo	1218	},{
		1219	/* Tomasz Pyra <hellfire@sedez.iq.pl> */
428	giacomo	1220	.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
		1221	.video_inputs = 3,
		1222	.audio_inputs = 4,
		1223	.tuner = 0,
		1224	.svhs = 2,
		1225	.gpiomask = 15,
		1226	.muxsel = { 2, 3, 1, 1},
		1227	.audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
		1228	.needs_tvaudio = 1,
		1229	.pll = PLL_28,
		1230	.tuner_type = 25,
		1231	/* GPIO wiring:
		1232	GPIO0: U4.A0 (hef4052bt)
		1233	GPIO1: U4.A1
		1234	GPIO2: U4.A1 (second hef4052bt)
		1235	GPIO3: U4.nEN, U5.A0, A5.nEN
		1236	GPIO8-15: vrd866b ?
		1237	*/
170	giacomo	1238	},{
428	giacomo	1239	.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
		1240	.video_inputs = 4,
		1241	.audio_inputs = 0,
		1242	.tuner = -1,
		1243	.svhs = 2,
		1244	.muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
		1245	.pll = PLL_28,
		1246	.no_msp34xx = 1,
170	giacomo	1247	},{
		1248
		1249	/* ---- card 0x48 ---------------------------------- */
		1250	/* Dariusz Kowalewski <darekk@automex.pl> */
428	giacomo	1251	.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
		1252	.video_inputs = 4,
		1253	.audio_inputs = 1,
		1254	.tuner = 0,
		1255	.svhs = 2,
		1256	.gpiomask = 0x3f,
		1257	.muxsel = { 2, 3, 1, 1 },
		1258	.audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
		1259	.needs_tvaudio = 1,
		1260	.no_msp34xx = 1,
		1261	.no_tda9875 = 1,
		1262	.pll = PLL_28,
		1263	.tuner_type = 5,
		1264	.audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
		1265	.has_radio = 1, // Note: not all cards have radio
		1266	/* GPIO wiring:
		1267	GPIO0: A0 hef4052
		1268	GPIO1: A1 hef4052
		1269	GPIO3: nEN hef4052
		1270	GPIO8-15: vrd866b
		1271	GPIO20,22,23: R30,R29,R28
		1272	*/
170	giacomo	1273	},{
		1274	/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
		1275	/* you must jumper JP5 for the card to work */
428	giacomo	1276	.name = "Sensoray 311",
		1277	.video_inputs = 5,
		1278	.audio_inputs = 0,
		1279	.tuner = -1,
		1280	.svhs = 4,
		1281	.gpiomask = 0,
		1282	.muxsel = { 2, 3, 1, 0, 0},
		1283	.audiomux = { 0 },
		1284	.needs_tvaudio = 0,
		1285	.tuner_type = -1,
170	giacomo	1286	},{
		1287	/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
428	giacomo	1288	.name = "RemoteVision MX (RV605)",
		1289	.video_inputs = 16,
		1290	.audio_inputs = 0,
		1291	.tuner = -1,
		1292	.svhs = -1,
		1293	.gpiomask = 0x00,
		1294	.gpiomask2 = 0x07ff,
		1295	.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
170	giacomo	1296	0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
428	giacomo	1297	.no_msp34xx = 1,
		1298	.no_tda9875 = 1,
		1299	.tuner_type = -1,
		1300	.muxsel_hook = rv605_muxsel,
170	giacomo	1301	},{
428	giacomo	1302	.name = "Powercolor MTV878/ MTV878R/ MTV878F",
		1303	.video_inputs = 3,
		1304	.audio_inputs = 2,
		1305	.tuner = 0,
		1306	.svhs = 2,
		1307	.gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
		1308	.muxsel = { 2, 1, 1, },
		1309	.audiomux = { 0, 1, 2, 2, 4 },
		1310	.needs_tvaudio = 0,
		1311	.tuner_type = TUNER_PHILIPS_PAL,
		1312	.pll = PLL_28,
		1313	.has_radio = 1,
170	giacomo	1314	},{
		1315
		1316	/* ---- card 0x4c ---------------------------------- */
		1317	/* Masaki Suzuki <masaki@btree.org> */
428	giacomo	1318	.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
		1319	.video_inputs = 3,
		1320	.audio_inputs = 1,
		1321	.tuner = 0,
		1322	.svhs = 2,
		1323	.gpiomask = 0x140007,
		1324	.muxsel = { 2, 3, 1, 1 },
		1325	.audiomux = { 0, 1, 2, 3, 4, 0 },
		1326	.tuner_type = TUNER_PHILIPS_NTSC,
		1327	.audio_hook = windvr_audio,
170	giacomo	1328	},{
428	giacomo	1329	.name = "GrandTec Multi Capture Card (Bt878)",
		1330	.video_inputs = 4,
		1331	.audio_inputs = 0,
		1332	.tuner = -1,
		1333	.svhs = -1,
		1334	.gpiomask = 0,
		1335	.muxsel = { 2, 3, 1, 0 },
		1336	.audiomux = { 0 },
		1337	.needs_tvaudio = 0,
		1338	.no_msp34xx = 1,
		1339	.pll = PLL_28,
		1340	.tuner_type = -1,
170	giacomo	1341	},{
428	giacomo	1342	.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
		1343	.video_inputs = 4,
		1344	.audio_inputs = 3,
		1345	.tuner = 0,
		1346	.svhs = 2,
		1347	.gpiomask = 7,
		1348	.muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
		1349	.audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
		1350	// This card lacks external Audio In, so we mute it on Ext. & Int.
		1351	// The PCB can take a sbx1637/sbx1673, wiring unknown.
		1352	// This card lacks PCI subsystem ID, sigh.
		1353	// audiomux=1: lower volume, 2+3: mute
		1354	// btwincap uses 0x80000/0x80003
		1355	.needs_tvaudio = 0,
		1356	.no_msp34xx = 1,
		1357	.pll = PLL_28,
		1358	.tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
		1359	// radio signal strength indicators work fine.
		1360	.has_radio = 1,
		1361	/* GPIO Info:
		1362	GPIO0,1: HEF4052 A0,A1
		1363	GPIO2: HEF4052 nENABLE
		1364	GPIO3-7: n.c.
		1365	GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
		1366	GPIO14,15: ??
		1367	GPIO16-21: n.c.
		1368	GPIO22,23: ??
		1369	?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
170	giacomo	1370	},{
428	giacomo	1371	/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
		1372	.name = "DSP Design TCVIDEO",
		1373	.video_inputs = 4,
		1374	.svhs = -1,
		1375	.muxsel = { 2, 3, 1, 0},
		1376	.pll = PLL_28,
		1377	.tuner_type = -1,
170	giacomo	1378	},{
428	giacomo	1379
		1380	/* ---- card 0x50 ---------------------------------- */
		1381	.name = "Hauppauge WinTV PVR",
		1382	.video_inputs = 4,
		1383	.audio_inputs = 1,
		1384	.tuner = 0,
		1385	.svhs = 2,
		1386	.muxsel = { 2, 0, 1, 1},
		1387	.needs_tvaudio = 1,
		1388	.pll = PLL_28,
		1389	.tuner_type = -1,
		1390
		1391	.gpiomask = 7,
		1392	.audiomux = {7},
170	giacomo	1393	},{
428	giacomo	1394	.name = "IODATA GV-BCTV5/PCI",
		1395	.video_inputs = 3,
		1396	.audio_inputs = 1,
		1397	.tuner = 0,
		1398	.svhs = 2,
		1399	.gpiomask = 0x0f0f80,
		1400	.muxsel = {2, 3, 1, 0},
		1401	.audiomux = {0x030000, 0x010000, 0x030000, 0, 0x020000, 0},
		1402	.no_msp34xx = 1,
		1403	.pll = PLL_28,
		1404	.tuner_type = TUNER_PHILIPS_NTSC_M,
		1405	.audio_hook = gvbctv3pci_audio,
		1406	.has_radio = 1,
170	giacomo	1407	},{
428	giacomo	1408	.name = "Osprey 100/150 (878)", /* 0x1(2\|3)-45C6-C1 */
		1409	.video_inputs = 4, /* id-inputs-clock */
		1410	.audio_inputs = 0,
		1411	.tuner = -1,
		1412	.svhs = 3,
		1413	.muxsel = { 3, 2, 0, 1 },
		1414	.pll = PLL_28,
		1415	.tuner_type = -1,
		1416	.no_msp34xx = 1,
		1417	.no_tda9875 = 1,
		1418	.no_tda7432 = 1,
170	giacomo	1419	},{
428	giacomo	1420	.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
		1421	.video_inputs = 3,
		1422	.audio_inputs = 0,
		1423	.tuner = -1,
		1424	.svhs = 2,
		1425	.muxsel = { 2, 3, 1 },
		1426	.pll = PLL_28,
		1427	.tuner_type = -1,
		1428	.no_msp34xx = 1,
		1429	.no_tda9875 = 1,
		1430	.no_tda7432 = 1,
170	giacomo	1431	},{
428	giacomo	1432
		1433	/* ---- card 0x54 ---------------------------------- */
		1434	.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
		1435	.video_inputs = 2,
		1436	.audio_inputs = 0,
		1437	.tuner = -1,
		1438	.svhs = 1,
		1439	.muxsel = { 3, 1 },
		1440	.pll = PLL_28,
		1441	.tuner_type = -1,
		1442	.no_msp34xx = 1,
		1443	.no_tda9875 = 1,
		1444	.no_tda7432 = 1,
170	giacomo	1445	},{
428	giacomo	1446	.name = "Osprey 101/151", /* 0x1(4\|5)-0004-C4 */
		1447	.video_inputs = 1,
		1448	.audio_inputs = 0,
		1449	.tuner = -1,
		1450	.svhs = -1,
		1451	.muxsel = { 0 },
		1452	.pll = PLL_28,
		1453	.tuner_type = -1,
		1454	.no_msp34xx = 1,
		1455	.no_tda9875 = 1,
		1456	.no_tda7432 = 1,
170	giacomo	1457	},{
428	giacomo	1458	.name = "Osprey 101/151 w/ svid", /* 0x(16\|17\|20)-00C4-C1 */
		1459	.video_inputs = 2,
		1460	.audio_inputs = 0,
		1461	.tuner = -1,
		1462	.svhs = 1,
		1463	.muxsel = { 0, 1 },
		1464	.pll = PLL_28,
		1465	.tuner_type = -1,
		1466	.no_msp34xx = 1,
		1467	.no_tda9875 = 1,
		1468	.no_tda7432 = 1,
170	giacomo	1469	},{
428	giacomo	1470	.name = "Osprey 200/201/250/251", /* 0x1(8\|9\|E\|F)-0004-C4 */
		1471	.video_inputs = 1,
		1472	.audio_inputs = 1,
		1473	.tuner = -1,
		1474	.svhs = -1,
		1475	.muxsel = { 0 },
		1476	.pll = PLL_28,
		1477	.tuner_type = -1,
		1478	.no_msp34xx = 1,
		1479	.no_tda9875 = 1,
		1480	.no_tda7432 = 1,
170	giacomo	1481	},{
428	giacomo	1482
		1483	/* ---- card 0x58 ---------------------------------- */
		1484	.name = "Osprey 200/250", /* 0x1(A\|B)-00C4-C1 */
		1485	.video_inputs = 2,
		1486	.audio_inputs = 1,
		1487	.tuner = -1,
		1488	.svhs = 1,
		1489	.muxsel = { 0, 1 },
		1490	.pll = PLL_28,
		1491	.tuner_type = -1,
		1492	.no_msp34xx = 1,
		1493	.no_tda9875 = 1,
		1494	.no_tda7432 = 1,
		1495	},{
		1496	.name = "Osprey 210/220", /* 0x1(A\|B)-04C0-C1 */
		1497	.video_inputs = 2,
		1498	.audio_inputs = 1,
		1499	.tuner = -1,
		1500	.svhs = 1,
		1501	.muxsel = { 2, 3 },
		1502	.pll = PLL_28,
		1503	.tuner_type = -1,
		1504	.no_msp34xx = 1,
		1505	.no_tda9875 = 1,
		1506	.no_tda7432 = 1,
		1507	},{
		1508	.name = "Osprey 500", /* 500 */
		1509	.video_inputs = 2,
		1510	.audio_inputs = 1,
		1511	.tuner = -1,
		1512	.svhs = 1,
		1513	.muxsel = { 2, 3 },
		1514	.pll = PLL_28,
		1515	.tuner_type = -1,
		1516	.no_msp34xx = 1,
		1517	.no_tda9875 = 1,
		1518	.no_tda7432 = 1,
		1519	},{
		1520	.name = "Osprey 540", /* 540 */
		1521	.video_inputs = 4,
		1522	.audio_inputs = 1,
		1523	.tuner = -1,
		1524	#if 0 /* TODO ... */
		1525	.svhs = OSPREY540_SVID_ANALOG,
		1526	.muxsel = { [OSPREY540_COMP_ANALOG] = 2,
		1527	[OSPREY540_SVID_ANALOG] = 3, },
		1528	#endif
		1529	.pll = PLL_28,
		1530	.tuner_type = -1,
		1531	.no_msp34xx = 1,
		1532	.no_tda9875 = 1,
		1533	.no_tda7432 = 1,
		1534	#if 0 /* TODO ... */
		1535	.muxsel_hook = osprey_540_muxsel,
		1536	.picture_hook = osprey_540_set_picture,
		1537	#endif
		1538	},{
		1539
		1540	/* ---- card 0x5C ---------------------------------- */
		1541	.name = "Osprey 2000", /* 2000 */
		1542	.video_inputs = 2,
		1543	.audio_inputs = 1,
		1544	.tuner = -1,
		1545	.svhs = 1,
		1546	.muxsel = { 2, 3 },
		1547	.pll = PLL_28,
		1548	.tuner_type = -1,
		1549	.no_msp34xx = 1,
		1550	.no_tda9875 = 1,
		1551	.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
		1552	},{
		1553	/* M G Berberich <berberic@forwiss.uni-passau.de> */
		1554	.name = "IDS Eagle",
		1555	.video_inputs = 4,
		1556	.audio_inputs = 0,
		1557	.tuner = -1,
		1558	.tuner_type = -1,
		1559	.svhs = -1,
		1560	.gpiomask = 0,
		1561	.muxsel = { 0, 1, 2, 3 },
		1562	.muxsel_hook = eagle_muxsel,
		1563	.no_msp34xx = 1,
		1564	.no_tda9875 = 1,
		1565	.pll = PLL_28,
		1566	},{
		1567	.name = "Pinnacle PCTV Sat",
		1568	.video_inputs = 2,
		1569	.audio_inputs = 0,
		1570	.svhs = 1,
		1571	.tuner = -1,
		1572	.tuner_type = -1,
		1573	.no_msp34xx = 1,
		1574	.no_tda9875 = 1,
		1575	.no_tda7432 = 1,
		1576	.gpiomask = 0x01,
		1577	.audiomux = { 0, 0, 0, 0, 1 },
		1578	.muxsel = { 3, 0, 1, 2},
		1579	.needs_tvaudio = 0,
		1580	.pll = PLL_28,
		1581	},{
		1582	.name = "Formac ProTV II (bt878)",
		1583	.video_inputs = 4,
		1584	.audio_inputs = 1,
		1585	.tuner = 0,
		1586	.svhs = 3,
		1587	.gpiomask = 2,
		1588	// TV, Comp1, Composite over SVID con, SVID
		1589	.muxsel = { 2, 3, 1, 1},
		1590	.audiomux = { 2, 2, 0, 0, 0 },
		1591	.pll = PLL_28,
		1592	.has_radio = 1,
		1593	.tuner_type = TUNER_PHILIPS_PAL,
		1594	/* sound routing:
		1595	GPIO=0x00,0x01,0x03: mute (?)
		1596	0x02: both TV and radio (tuner: FM1216/I)
		1597	The card has onboard audio connectors labeled "cdrom" and "board",
		1598	not soldered here, though unknown wiring.
		1599	Card lacks: external audio in, pci subsystem id.
		1600	*/
		1601	},{
		1602
		1603	/* ---- card 0x60 ---------------------------------- */
		1604	.name = "MachTV",
		1605	.video_inputs = 3,
		1606	.audio_inputs = 1,
		1607	.tuner = 0,
		1608	.svhs = -1,
		1609	.gpiomask = 7,
		1610	.muxsel = { 2, 3, 1, 1},
		1611	.audiomux = { 0, 1, 2, 3, 4},
		1612	.needs_tvaudio = 1,
		1613	.tuner_type = 5,
		1614	.pll = 1,
		1615	},{
		1616	.name = "Euresys Picolo",
		1617	.video_inputs = 3,
		1618	.audio_inputs = 0,
		1619	.tuner = -1,
		1620	.svhs = 2,
		1621	.gpiomask = 0,
		1622	.no_msp34xx = 1,
		1623	.no_tda9875 = 1,
		1624	.no_tda7432 = 1,
		1625	.muxsel = { 2, 0, 1},
		1626	.pll = PLL_28,
		1627	},{
		1628	/* Luc Van Hoeylandt <luc@e-magic.be> */
		1629	.name = "ProVideo PV150", /* 0x4f */
		1630	.video_inputs = 2,
		1631	.audio_inputs = 0,
		1632	.tuner = -1,
		1633	.svhs = -1,
		1634	.gpiomask = 0,
		1635	.muxsel = { 2, 3 },
		1636	.audiomux = { 0 },
		1637	.needs_tvaudio = 0,
		1638	.no_msp34xx = 1,
		1639	.pll = PLL_28,
		1640	.tuner_type = -1,
		1641	},{
		1642	/* Hiroshi Takekawa <sian@big.or.jp> */
		1643	/* This card lacks subsystem ID */
		1644	.name = "AD-TVK503", /* 0x63 */
		1645	.video_inputs = 4,
		1646	.audio_inputs = 1,
		1647	.tuner = 0,
		1648	.svhs = 2,
		1649	.gpiomask = 0x001e8007,
		1650	.muxsel = { 2, 3, 1, 0 },
		1651	/* Tuner, Radio, external, internal, off, on */
		1652	.audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
		1653	.needs_tvaudio = 0,
		1654	.no_msp34xx = 1,
		1655	.pll = PLL_28,
		1656	.tuner_type = 2,
		1657	.audio_hook = adtvk503_audio,
		1658	},{
		1659
		1660	/* ---- card 0x64 ---------------------------------- */
		1661	.name = "Hercules Smart TV Stereo",
		1662	.video_inputs = 4,
		1663	.audio_inputs = 1,
		1664	.tuner = 0,
		1665	.svhs = 2,
		1666	.gpiomask = 0x00,
		1667	.muxsel = { 2, 3, 1, 1 },
		1668	.needs_tvaudio = 1,
		1669	.no_msp34xx = 1,
		1670	.pll = PLL_28,
		1671	.tuner_type = 5,
		1672	/* Notes:
		1673	- card lacks subsystem ID
		1674	- stereo variant w/ daughter board with tda9874a @0xb0
		1675	- Audio Routing:
		1676	always from tda9874 independent of GPIO (?)
		1677	external line in: unknown
		1678	- Other chips: em78p156elp @ 0x96 (probably IR remote control)
		1679	hef4053 (instead 4052) for unknown function
		1680	*/
		1681	},{
		1682	.name = "Pace TV & Radio Card",
		1683	.video_inputs = 4,
		1684	.audio_inputs = 1,
		1685	.tuner = 0,
		1686	.svhs = 2,
		1687	.muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
		1688	.gpiomask = 0,
		1689	.no_tda9875 = 1,
		1690	.no_tda7432 = 1,
		1691	.tuner_type = 1,
		1692	.has_radio = 1,
		1693	.pll = PLL_28,
		1694	/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
		1695	only internal line out: (4pin header) RGGL
		1696	Radio must be decoded by msp3410d (not routed through)*/
		1697	// .digital_mode = DIGITAL_MODE_CAMERA, // todo!
		1698	},{
		1699	/* Chris Willing <chris@vislab.usyd.edu.au> */
		1700	.name = "IVC-200",
		1701	.video_inputs = 1,
		1702	.audio_inputs = 0,
		1703	.tuner = -1,
		1704	.tuner_type = -1,
		1705	.svhs = -1,
		1706	.gpiomask = 0xdf,
		1707	.muxsel = { 2 },
		1708	.pll = PLL_28,
		1709	},{
		1710	.name = "Grand X-Guard / Trust 814PCI",
		1711	.video_inputs = 16,
		1712	.audio_inputs = 0,
		1713	.tuner = -1,
		1714	.svhs = -1,
		1715	.tuner_type = 4,
		1716	.gpiomask2 = 0xff,
		1717	.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
		1718	.muxsel_hook = xguard_muxsel,
		1719	.no_msp34xx = 1,
		1720	.no_tda9875 = 1,
		1721	.no_tda7432 = 1,
		1722	.pll = PLL_28,
		1723	},{
		1724
		1725	/* ---- card 0x68 ---------------------------------- */
		1726	.name = "Nebula Electronics DigiTV",
		1727	.svhs = -1,
		1728	.muxsel = { 2, 3, 1, 0},
		1729	.no_msp34xx = 1,
		1730	.no_tda9875 = 1,
		1731	.no_tda7432 = 1,
		1732	.pll = PLL_28,
		1733	.tuner_type = -1,
		1734	.no_video = 1,
		1735	},{
		1736	/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
		1737	.name = "ProVideo PV143",
		1738	.video_inputs = 4,
		1739	.audio_inputs = 0,
		1740	.tuner = -1,
		1741	.svhs = -1,
		1742	.gpiomask = 0,
		1743	.muxsel = { 2, 3, 1, 0 },
		1744	.audiomux = { 0 },
		1745	.needs_tvaudio = 0,
		1746	.no_msp34xx = 1,
		1747	.pll = PLL_28,
		1748	.tuner_type = -1,
		1749	},{
		1750	/* M.Klahr@phytec.de */
		1751	.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
		1752	.video_inputs = 4,
		1753	.audio_inputs = 0,
		1754	.tuner = -1, /* card has no tuner */
		1755	.svhs = 3,
		1756	.gpiomask = 0x00,
		1757	.muxsel = { 2, 3, 1, 0},
		1758	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1759	.needs_tvaudio = 1,
		1760	.pll = PLL_28,
		1761	.tuner_type = -1,
		1762	},{
		1763	.name = "PHYTEC VD-009-X1 Combi (bt878)",
		1764	.video_inputs = 4,
		1765	.audio_inputs = 0,
		1766	.tuner = -1, /* card has no tuner */
		1767	.svhs = 3,
		1768	.gpiomask = 0x00,
		1769	.muxsel = { 2, 3, 1, 1},
		1770	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1771	.needs_tvaudio = 1,
		1772	.pll = PLL_28,
		1773	.tuner_type = -1,
		1774	},{
		1775
		1776	/* ---- card 0x6c ---------------------------------- */
		1777	.name = "PHYTEC VD-009 MiniDIN (bt878)",
		1778	.video_inputs = 10,
		1779	.audio_inputs = 0,
		1780	.tuner = -1, /* card has no tuner */
		1781	.svhs = 9,
		1782	.gpiomask = 0x00,
		1783	.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
		1784	via the upper nibble of muxsel. here: used for
		1785	xternal video-mux */
		1786	.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
		1787	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1788	.needs_tvaudio = 1,
		1789	.pll = PLL_28,
		1790	.tuner_type = -1,
		1791	},{
		1792	.name = "PHYTEC VD-009 Combi (bt878)",
		1793	.video_inputs = 10,
		1794	.audio_inputs = 0,
		1795	.tuner = -1, /* card has no tuner */
		1796	.svhs = 9,
		1797	.gpiomask = 0x00,
		1798	.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
		1799	via the upper nibble of muxsel. here: used for
		1800	xternal video-mux */
		1801	.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
		1802	.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
		1803	.needs_tvaudio = 1,
		1804	.pll = PLL_28,
		1805	.tuner_type = -1,
		1806	},{
		1807	.name = "IVC-100",
		1808	.video_inputs = 4,
		1809	.audio_inputs = 0,
		1810	.tuner = -1,
		1811	.tuner_type = -1,
		1812	.svhs = -1,
		1813	.gpiomask = 0xdf,
		1814	.muxsel = { 2, 3, 1, 0 },
		1815	.pll = PLL_28,
		1816	},{
		1817	/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
		1818	.name = "IVC-120G",
		1819	.video_inputs = 16,
		1820	.audio_inputs = 0, /* card has no audio */
		1821	.tuner = -1, /* card has no tuner */
		1822	.tuner_type = -1,
		1823	.svhs = -1, /* card has no svhs */
		1824	.needs_tvaudio = 0,
		1825	.no_msp34xx = 1,
		1826	.no_tda9875 = 1,
		1827	.no_tda7432 = 1,
		1828	.gpiomask = 0x00,
		1829	.muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
		1830	0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
		1831	.muxsel_hook = ivc120_muxsel,
		1832	.pll = PLL_28,
170	giacomo	1833	}};
		1834
428	giacomo	1835	const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
170	giacomo	1836
		1837	/* ----------------------------------------------------------------------- */
		1838
		1839	static unsigned char eeprom_data[256];
		1840
		1841	/*
		1842	* identify card
		1843	*/
428	giacomo	1844	void __devinit bttv_idcard(struct bttv *btv)
170	giacomo	1845	{
		1846	unsigned int gpiobits;
		1847	int i,type;
667	giacomo	1848	#ifndef __FORCE_PXC__
		1849	unsigned short tmp;
		1850	#endif
170	giacomo	1851
667	giacomo	1852	#ifdef __FORCE_PXC__
		1853	type = 98;
		1854	btv->type = cards[type].cardnr;
		1855	#else
		1856
		1857
170	giacomo	1858	/* read PCI subsystem ID */
428	giacomo	1859	pci_read_config_word(btv->dev, PCI_SUBSYSTEM_ID, &tmp);
170	giacomo	1860	btv->cardid = tmp << 16;
428	giacomo	1861	pci_read_config_word(btv->dev, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
170	giacomo	1862	btv->cardid \|= tmp;
		1863
		1864	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
		1865	/* look for the card */
		1866	for (type = -1, i = 0; cards[i].id != 0; i++)
		1867	if (cards[i].id == btv->cardid)
		1868	type = i;
		1869
		1870	if (type != -1) {
		1871	/* found it */
428	giacomo	1872	printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
		1873	"PCI subsystem ID is %04x:%04x\n",
170	giacomo	1874	btv->nr,cards[type].name,cards[type].cardnr,
428	giacomo	1875	btv->cardid & 0xffff,
		1876	(btv->cardid >> 16) & 0xffff);
170	giacomo	1877	btv->type = cards[type].cardnr;
		1878	} else {
		1879	/* 404 */
		1880	printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
428	giacomo	1881	btv->nr, btv->cardid & 0xffff,
		1882	(btv->cardid >> 16) & 0xffff);
		1883	printk(KERN_DEBUG "please mail id, board name and "
		1884	"the correct card= insmod option to kraxel@bytesex.org\n");
170	giacomo	1885	}
428	giacomo	1886	}
170	giacomo	1887
		1888	/* let the user override the autodetected type */
428	giacomo	1889	if (card[btv->nr] < bttv_num_tvcards)
170	giacomo	1890	btv->type=card[btv->nr];
		1891
667	giacomo	1892	#endif
		1893
170	giacomo	1894	/* print which card config we are using */
		1895	printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
428	giacomo	1896	bttv_tvcards[btv->type].name, btv->type,
		1897	card[btv->nr] < bttv_num_tvcards
		1898	? "insmod option" : "autodetected");
170	giacomo	1899
		1900	/* overwrite gpio stuff ?? */
428	giacomo	1901	if (UNSET == audioall && UNSET == audiomux[0])
170	giacomo	1902	return;
		1903
428	giacomo	1904	if (UNSET != audiomux[0]) {
170	giacomo	1905	gpiobits = 0;
		1906	for (i = 0; i < 5; i++) {
		1907	bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
		1908	gpiobits \|= audiomux[i];
		1909	}
		1910	} else {
		1911	gpiobits = audioall;
		1912	for (i = 0; i < 5; i++) {
		1913	bttv_tvcards[btv->type].audiomux[i] = audioall;
		1914	}
		1915	}
428	giacomo	1916	bttv_tvcards[btv->type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
		1917	printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
170	giacomo	1918	btv->nr,bttv_tvcards[btv->type].gpiomask);
		1919	for (i = 0; i < 5; i++) {
428	giacomo	1920	printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
170	giacomo	1921	}
428	giacomo	1922	printk("\n");
170	giacomo	1923	}
		1924
		1925	/*
		1926	* (most) board specific initialisations goes here
		1927	*/
		1928
428	giacomo	1929	/* Some Modular Technology cards have an eeprom, but no subsystem ID */
		1930	void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
		1931	{
		1932	int type = -1;
		1933
		1934	if (0 == strncmp(eeprom_data,"GET.MM20xPCTV",13))
		1935	type = BTTV_MODTEC_205;
		1936	else if (0 == strncmp(eeprom_data+20,"Picolo",7))
		1937	type = BTTV_EURESYS_PICOLO;
		1938	else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
		1939	type = BTTV_HAUPPAUGE; /* old bt848 */
		1940
		1941	if (-1 != type) {
		1942	btv->type = type;
		1943	printk("bttv%d: detected by eeprom: %s [card=%d]\n",
		1944	btv->nr, bttv_tvcards[btv->type].name, btv->type);
		1945	}
		1946	}
		1947
170	giacomo	1948	static void flyvideo_gpio(struct bttv *btv)
428	giacomo	1949	{
		1950	int gpio,outbits,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
170	giacomo	1951	int tuner=-1,ttype;
		1952
		1953	outbits = btread(BT848_GPIO_OUT_EN);
		1954	btwrite(0x00, BT848_GPIO_OUT_EN);
		1955	udelay(8); // without this we would see the 0x1800 mask
428	giacomo	1956	gpio=btread(BT848_GPIO_DATA);
170	giacomo	1957	btwrite(outbits, BT848_GPIO_OUT_EN);
		1958	// all cards provide GPIO info, some have an additional eeprom
428	giacomo	1959	// LR50: GPIO coding can be found lower right CP1 .. CP9
		1960	// CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
		1961	// GPIO14-12: n.c.
		1962	// LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
170	giacomo	1963
		1964	// lowest 3 bytes are remote control codes (no handshake needed)
428	giacomo	1965	// xxxFFF: No remote control chip soldered
		1966	// xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
		1967	// Note: Some bits are Audio_Mask !
		1968
170	giacomo	1969	ttype=(gpio&0x0f0000)>>16;
		1970	switch(ttype) {
428	giacomo	1971	case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
170	giacomo	1972	break;
428	giacomo	1973	case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
170	giacomo	1974	break;
428	giacomo	1975	case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
170	giacomo	1976	break;
428	giacomo	1977	case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
170	giacomo	1978	break;
428	giacomo	1979	case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
		1980	break;
170	giacomo	1981	default:
428	giacomo	1982	printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->nr);
170	giacomo	1983	}
428	giacomo	1984
		1985	has_remote = gpio & 0x800000;
		1986	has_radio = gpio & 0x400000;
		1987	// unknown 0x200000;
		1988	// unknown2 0x100000;
		1989	is_capture_only = !(gpio & 0x008000); //GPIO15
		1990	has_tda9820_tda9821 = !(gpio & 0x004000);
		1991	is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
		1992	// gpio & 0x001000 // output bit for audio routing
		1993
		1994	if(is_capture_only)
		1995	tuner=4; // No tuner present
		1996
		1997	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
		1998	btv->nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
		1999	printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
		2000	btv->nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
		2001	is_capture_only?"yes":"no ");
		2002
		2003	if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
		2004	btv->tuner_type = tuner;
		2005	btv->has_radio = has_radio;
		2006
		2007	// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
		2008	// LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
		2009	// Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
		2010	if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
		2011	//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
170	giacomo	2012	}
		2013
		2014	int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
		2015	14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
		2016	int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
428	giacomo	2017	1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
170	giacomo	2018
428	giacomo	2019	static void miro_pinnacle_gpio(struct bttv *btv)
170	giacomo	2020	{
428	giacomo	2021	int id,msp,gpio;
		2022	char *info;
170	giacomo	2023
428	giacomo	2024	btwrite(0,BT848_GPIO_OUT_EN);
		2025	gpio = btread(BT848_GPIO_DATA);
		2026	id = ((gpio>>10) & 63) -1;
		2027	msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
		2028	if (id < 32) {
170	giacomo	2029	btv->tuner_type = miro_tunermap[id];
428	giacomo	2030	if (0 == (gpio & 0x20)) {
170	giacomo	2031	btv->has_radio = 1;
		2032	if (!miro_fmtuner[id]) {
		2033	btv->has_matchbox = 1;
		2034	btv->mbox_we = (1<<6);
		2035	btv->mbox_most = (1<<7);
		2036	btv->mbox_clk = (1<<8);
		2037	btv->mbox_data = (1<<9);
		2038	btv->mbox_mask = (1<<6)\|(1<<7)\|(1<<8)\|(1<<9);
		2039	}
		2040	} else {
		2041	btv->has_radio = 0;
		2042	}
		2043	if (-1 != msp) {
		2044	if (btv->type == BTTV_MIRO)
		2045	btv->type = BTTV_MIROPRO;
		2046	if (btv->type == BTTV_PINNACLE)
		2047	btv->type = BTTV_PINNACLEPRO;
		2048	}
428	giacomo	2049	printk(KERN_INFO
		2050	"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
		2051	btv->nr, id+1, btv->tuner_type,
		2052	!btv->has_radio ? "no" :
		2053	(btv->has_matchbox ? "matchbox" : "fmtuner"),
		2054	(-1 == msp) ? "no" : "yes");
		2055	} else {
		2056	/* new cards with microtune tuner */
		2057	id = 63 - id;
		2058	btv->has_radio = 0;
		2059	switch (id) {
		2060	case 1:
		2061	info = "PAL / mono";
		2062	break;
		2063	case 2:
		2064	info = "PAL+SECAM / stereo";
		2065	btv->has_radio = 1;
		2066	break;
		2067	case 3:
		2068	info = "NTSC / stereo";
		2069	btv->has_radio = 1;
		2070	break;
		2071	case 4:
		2072	info = "PAL+SECAM / mono";
		2073	break;
		2074	case 5:
		2075	info = "NTSC / mono";
		2076	break;
		2077	case 6:
		2078	info = "NTSC / stereo";
		2079	break;
		2080	default:
		2081	info = "oops: unknown card";
		2082	break;
		2083	}
		2084	if (-1 != msp)
		2085	btv->type = BTTV_PINNACLEPRO;
		2086	printk(KERN_INFO
		2087	"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
		2088	btv->nr, id, info, btv->has_radio ? "yes" : "no");
		2089	btv->tuner_type = 33;
		2090	btv->pinnacle_id = id;
		2091	}
		2092	}
		2093
		2094	/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
		2095	#define LM1882_SYNC_DRIVE 0x200000L
		2096
		2097	static void init_ids_eagle(struct bttv *btv)
		2098	{
		2099	btwrite(0xFFFF37, BT848_GPIO_OUT_EN);
		2100	btwrite(0x000000, BT848_GPIO_REG_INP);
		2101
		2102	btwrite(0x200020, BT848_GPIO_DATA);
		2103
		2104	/* flash strobe inverter ?! */
		2105	btwrite(0x200024, BT848_GPIO_DATA);
		2106
		2107	/* switch sync drive off */
		2108	btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
		2109
		2110	/* set BT848 muxel to 2 */
		2111	btaor((2)<<5, ~(2<<5), BT848_IFORM);
		2112	}
		2113
		2114	/* Muxsel helper for the IDS Eagle.
		2115	* the eagles does not use the standard muxsel-bits but
		2116	* has its own multiplexer */
		2117	static void eagle_muxsel(struct bttv *btv, unsigned int input)
		2118	{
		2119	btaor((2)<<5, ~(3<<5), BT848_IFORM);
		2120	btaor((bttv_tvcards[btv->type].muxsel[input&7]&3),
		2121	~3, BT848_GPIO_DATA);
		2122
170	giacomo	2123	#if 0
428	giacomo	2124	/* svhs */
		2125	/* wake chroma ADC */
		2126	btand(~BT848_ADC_C_SLEEP, BT848_ADC);
		2127	/* set to YC video */
		2128	btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
		2129	btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
		2130	#else
		2131	/* composite */
		2132	/* set chroma ADC to sleep */
		2133	btor(BT848_ADC_C_SLEEP, BT848_ADC);
		2134	/* set to composite video */
		2135	btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
		2136	btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
170	giacomo	2137	#endif
428	giacomo	2138
		2139	/* switch sync drive off */
		2140	btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
		2141	}
		2142
		2143	/* ----------------------------------------------------------------------- */
		2144
		2145	void bttv_reset_audio(struct bttv *btv)
		2146	{
		2147	/*
		2148	* BT878A has a audio-reset register.
		2149	* 1. This register is an audio reset function but it is in
		2150	* function-0 (video capture) address space.
		2151	* 2. It is enough to do this once per power-up of the card.
		2152	* 3. There is a typo in the Conexant doc -- it is not at
		2153	* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
		2154	* --//Shrikumar 030609
		2155	*/
		2156	if (btv->id != 878)
		2157	return;
		2158
		2159	if (bttv_debug)
		2160	printk("bttv%d: BT878A ARESET\n",btv->nr);
		2161	btwrite((1<<7), 0x058);
		2162	udelay(10);
		2163	btwrite( 0, 0x058);
		2164	}
		2165
		2166	/* initialization part one -- before registering i2c bus */
		2167	void __devinit bttv_init_card1(struct bttv *btv)
		2168	{
		2169	switch (btv->type) {
		2170	case BTTV_HAUPPAUGE:
		2171	case BTTV_HAUPPAUGE878:
		2172	boot_msp34xx(btv,5);
		2173	break;
		2174	case BTTV_VOODOOTV_FM:
		2175	boot_msp34xx(btv,20);
		2176	break;
		2177	case BTTV_AVERMEDIA98:
		2178	boot_msp34xx(btv,11);
		2179	break;
		2180	case BTTV_HAUPPAUGEPVR:
		2181	pvr_boot(btv);
		2182	break;
170	giacomo	2183	}
428	giacomo	2184	}
170	giacomo	2185
428	giacomo	2186	/* initialization part two -- after registering i2c bus */
		2187	void __devinit bttv_init_card2(struct bttv *btv)
		2188	{
		2189	btv->tuner_type = -1;
		2190
		2191	if (BTTV_UNKNOWN == btv->type) {
		2192	bttv_readee(btv,eeprom_data,0xa0);
		2193	identify_by_eeprom(btv,eeprom_data);
		2194	}
		2195
		2196	switch (btv->type) {
		2197	case BTTV_MIRO:
		2198	case BTTV_MIROPRO:
		2199	case BTTV_PINNACLE:
		2200	case BTTV_PINNACLEPRO:
		2201	/* miro/pinnacle */
		2202	miro_pinnacle_gpio(btv);
		2203	break;
		2204	case BTTV_FLYVIDEO_98:
		2205	case BTTV_MAXI:
		2206	case BTTV_LIFE_FLYKIT:
		2207	case BTTV_FLYVIDEO:
		2208	case BTTV_TYPHOON_TVIEW:
		2209	case BTTV_CHRONOS_VS2:
		2210	case BTTV_FLYVIDEO_98FM:
		2211	case BTTV_FLYVIDEO2000:
		2212	case BTTV_FLYVIDEO98EZ:
		2213	case BTTV_CONFERENCETV:
		2214	case BTTV_LIFETEC_9415:
170	giacomo	2215	flyvideo_gpio(btv);
428	giacomo	2216	break;
		2217	case BTTV_HAUPPAUGE:
		2218	case BTTV_HAUPPAUGE878:
		2219	case BTTV_HAUPPAUGEPVR:
170	giacomo	2220	/* pick up some config infos from the eeprom */
		2221	bttv_readee(btv,eeprom_data,0xa0);
		2222	hauppauge_eeprom(btv);
428	giacomo	2223	break;
		2224	case BTTV_AVERMEDIA98:
		2225	case BTTV_AVPHONE98:
170	giacomo	2226	bttv_readee(btv,eeprom_data,0xa0);
		2227	avermedia_eeprom(btv);
428	giacomo	2228	break;
		2229	case BTTV_PXC200:
170	giacomo	2230	init_PXC200(btv);
428	giacomo	2231	break;
		2232	case BTTV_VHX:
170	giacomo	2233	btv->has_radio = 1;
		2234	btv->has_matchbox = 1;
		2235	btv->mbox_we = 0x20;
		2236	btv->mbox_most = 0;
		2237	btv->mbox_clk = 0x08;
		2238	btv->mbox_data = 0x10;
		2239	btv->mbox_mask = 0x38;
428	giacomo	2240	break;
		2241	case BTTV_VOBIS_BOOSTAR:
		2242	case BTTV_TERRATV:
		2243	terratec_active_radio_upgrade(btv);
		2244	break;
		2245	case BTTV_MAGICTVIEW061:
		2246	if (btv->cardid == 0x3002144f) {
170	giacomo	2247	btv->has_radio=1;
428	giacomo	2248	printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
170	giacomo	2249	}
428	giacomo	2250	break;
		2251	case BTTV_STB2:
		2252	if (btv->cardid == 0x3060121a) {
		2253	/* Fix up entry for 3DFX VoodooTV 100,
		2254	which is an OEM STB card variant. */
		2255	btv->has_radio=0;
		2256	btv->tuner_type=TUNER_TEMIC_NTSC;
		2257	}
		2258	break;
		2259	case BTTV_OSPREY1x0:
		2260	case BTTV_OSPREY1x0_848:
		2261	case BTTV_OSPREY101_848:
		2262	case BTTV_OSPREY1x1:
		2263	case BTTV_OSPREY1x1_SVID:
		2264	case BTTV_OSPREY2xx:
		2265	case BTTV_OSPREY2x0_SVID:
		2266	case BTTV_OSPREY2x0:
		2267	case BTTV_OSPREY500:
		2268	case BTTV_OSPREY540:
		2269	case BTTV_OSPREY2000:
		2270	bttv_readee(btv,eeprom_data,0xa0);
		2271	osprey_eeprom(btv);
		2272	break;
		2273	case BTTV_IDS_EAGLE:
		2274	init_ids_eagle(btv);
		2275	break;
		2276	case BTTV_MODTEC_205:
		2277	bttv_readee(btv,eeprom_data,0xa0);
		2278	modtec_eeprom(btv);
		2279	break;
170	giacomo	2280	}
		2281
		2282	/* pll configuration */
		2283	if (!(btv->id==848 && btv->revision==0x11)) {
		2284	/* defaults from card list */
		2285	if (PLL_28 == bttv_tvcards[btv->type].pll) {
		2286	btv->pll.pll_ifreq=28636363;
		2287	btv->pll.pll_crystal=BT848_IFORM_XT0;
		2288	}
		2289	if (PLL_35 == bttv_tvcards[btv->type].pll) {
		2290	btv->pll.pll_ifreq=35468950;
		2291	btv->pll.pll_crystal=BT848_IFORM_XT1;
		2292	}
		2293	/* insmod options can override */
		2294	switch (pll[btv->nr]) {
		2295	case 0: /* none */
		2296	btv->pll.pll_crystal = 0;
		2297	btv->pll.pll_ifreq = 0;
		2298	btv->pll.pll_ofreq = 0;
		2299	break;
		2300	case 1: /* 28 MHz */
		2301	case 28:
		2302	btv->pll.pll_ifreq = 28636363;
		2303	btv->pll.pll_ofreq = 0;
		2304	btv->pll.pll_crystal = BT848_IFORM_XT0;
		2305	break;
		2306	case 2: /* 35 MHz */
		2307	case 35:
		2308	btv->pll.pll_ifreq = 35468950;
		2309	btv->pll.pll_ofreq = 0;
		2310	btv->pll.pll_crystal = BT848_IFORM_XT1;
		2311	break;
		2312	}
		2313	}
428	giacomo	2314	btv->pll.pll_current = -1;
170	giacomo	2315
428	giacomo	2316	/* tuner configuration (from card list / autodetect / insmod option) */
		2317	if (UNSET != bttv_tvcards[btv->type].tuner_type)
		2318	if(UNSET == btv->tuner_type)
		2319	btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
		2320	if (UNSET != tuner[btv->nr])
170	giacomo	2321	btv->tuner_type = tuner[btv->nr];
428	giacomo	2322	printk("bttv%d: using tuner=%d\n",btv->nr,btv->tuner_type);
		2323	if (btv->pinnacle_id != UNSET)
		2324	bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
		2325	&btv->pinnacle_id);
		2326	if (btv->tuner_type != UNSET)
		2327	bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
		2328	btv->svhs = bttv_tvcards[btv->type].svhs;
		2329	if (svhs[btv->nr] != UNSET)
		2330	btv->svhs = svhs[btv->nr];
170	giacomo	2331
		2332	if (bttv_tvcards[btv->type].has_radio)
		2333	btv->has_radio=1;
428	giacomo	2334	if (bttv_tvcards[btv->type].audio_hook)
		2335	btv->audio_hook=bttv_tvcards[btv->type].audio_hook;
170	giacomo	2336
428	giacomo	2337	if (bttv_tvcards[btv->type].digital_mode == DIGITAL_MODE_CAMERA) {
		2338	/* detect Bt832 chip for quartzsight digital camera */
		2339	if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) \|\|
		2340	(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
		2341	boot_bt832(btv);
		2342	}
		2343
170	giacomo	2344	/* try to detect audio/fader chips */
		2345	if (!bttv_tvcards[btv->type].no_msp34xx &&
		2346	bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
428	giacomo	2347	if (autoload)
		2348	request_module("msp3400");
170	giacomo	2349	}
		2350
428	giacomo	2351	if (bttv_tvcards[btv->type].msp34xx_alt &&
		2352	bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) {
		2353	if (autoload)
		2354	request_module("msp3400");
		2355	}
		2356
170	giacomo	2357	if (!bttv_tvcards[btv->type].no_tda9875 &&
		2358	bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
428	giacomo	2359	if (autoload)
		2360	request_module("tda9875");
170	giacomo	2361	}
		2362
		2363	if (!bttv_tvcards[btv->type].no_tda7432 &&
428	giacomo	2364	bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
		2365	if (autoload)
		2366	request_module("tda7432");
170	giacomo	2367	}
		2368	if (bttv_tvcards[btv->type].needs_tvaudio) {
428	giacomo	2369	if (autoload)
		2370	request_module("tvaudio");
170	giacomo	2371	}
428	giacomo	2372	/* tuner modules */
		2373	if (btv->pinnacle_id != UNSET) {
		2374	if (autoload)
		2375	request_module("tda9887");
170	giacomo	2376	}
428	giacomo	2377	if (btv->tuner_type != UNSET) {
		2378	if (autoload)
		2379	request_module("tuner");
		2380	}
170	giacomo	2381	}
		2382
		2383
		2384	/* ----------------------------------------------------------------------- */
		2385	/* some hauppauge specific stuff */
		2386
		2387	static struct HAUPPAUGE_TUNER
		2388	{
		2389	int id;
		2390	char *name;
		2391	}
428	giacomo	2392	hauppauge_tuner[] __devinitdata =
170	giacomo	2393	{
		2394	{ TUNER_ABSENT, "" },
		2395	{ TUNER_ABSENT, "External" },
		2396	{ TUNER_ABSENT, "Unspecified" },
		2397	{ TUNER_PHILIPS_PAL, "Philips FI1216" },
		2398	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
		2399	{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
		2400	{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
		2401	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
		2402	{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
		2403	{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
		2404	{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
		2405	{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
		2406	{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
		2407	{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
		2408	{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
		2409	{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
		2410	{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
		2411	{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
		2412	{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
		2413	{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
		2414	{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
		2415	{ TUNER_PHILIPS_PAL, "Philips FM1216" },
		2416	{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
		2417	{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
		2418	{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
		2419	{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
		2420	{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
		2421	{ TUNER_ABSENT, "Samsung TCPN9082D" },
		2422	{ TUNER_ABSENT, "Samsung TCPM9092P" },
		2423	{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
		2424	{ TUNER_ABSENT, "Samsung TCPN9085D" },
		2425	{ TUNER_ABSENT, "Samsung TCPB9085P" },
		2426	{ TUNER_ABSENT, "Samsung TCPL9091P" },
		2427	{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
		2428	{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
		2429	{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
428	giacomo	2430	{ TUNER_PHILIPS_NTSC, "Philips TD1536" },
		2431	{ TUNER_PHILIPS_NTSC, "Philips TD1536D" },
170	giacomo	2432	{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
		2433	{ TUNER_ABSENT, "Philips FI1256MP" },
		2434	{ TUNER_ABSENT, "Samsung TCPQ9091P" },
		2435	{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
		2436	{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
		2437	{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
		2438	{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
		2439	{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
428	giacomo	2440	{ TUNER_LG_NTSC_FM, "LG TPI8NSR01F"},
		2441	{ TUNER_LG_PAL_FM, "LG TPI8PSB01D"},
		2442	{ TUNER_LG_PAL, "LG TPI8PSB11D"},
170	giacomo	2443	{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
		2444	{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
		2445	};
		2446
428	giacomo	2447	static void modtec_eeprom(struct bttv *btv)
170	giacomo	2448	{
428	giacomo	2449	if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
		2450	btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
		2451	printk("bttv Modtec: Tuner autodetected %s\n",
		2452	&eeprom_data[0x1e]);
		2453	} else {
		2454	printk("bttv Modtec: Unknown TunerString:%s\n",
		2455	&eeprom_data[0x1e]);
		2456	}
		2457	}
170	giacomo	2458
428	giacomo	2459	static void __devinit hauppauge_eeprom(struct bttv *btv)
		2460	{
		2461	unsigned int blk2,tuner,radio,model;
		2462
170	giacomo	2463	if (eeprom_data[0] != 0x84 \|\| eeprom_data[2] != 0)
		2464	printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
		2465	btv->nr);
		2466
		2467	/* Block 2 starts after len+3 bytes header */
		2468	blk2 = eeprom_data[1] + 3;
		2469
		2470	/* decode + use some config infos */
		2471	model = eeprom_data[12] << 8 \| eeprom_data[11];
		2472	tuner = eeprom_data[9];
		2473	radio = eeprom_data[blk2-1] & 0x01;
		2474
428	giacomo	2475	if (tuner < ARRAY_SIZE(hauppauge_tuner))
170	giacomo	2476	btv->tuner_type = hauppauge_tuner[tuner].id;
		2477	if (radio)
		2478	btv->has_radio = 1;
		2479
		2480	if (bttv_verbose)
		2481	printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
		2482	"tuner=%s (%d), radio=%s\n",
		2483	btv->nr, model, hauppauge_tuner[tuner].name,
		2484	btv->tuner_type, radio ? "yes" : "no");
		2485	}
		2486
428	giacomo	2487	static int terratec_active_radio_upgrade(struct bttv *btv)
170	giacomo	2488	{
428	giacomo	2489	int freq;
		2490
		2491	btv->has_radio = 1;
		2492	btv->has_matchbox = 1;
		2493	btv->mbox_we = 0x10;
		2494	btv->mbox_most = 0x20;
		2495	btv->mbox_clk = 0x08;
		2496	btv->mbox_data = 0x04;
		2497	btv->mbox_mask = 0x3c;
		2498
		2499	btv->mbox_iow = 1 << 8;
		2500	btv->mbox_ior = 1 << 9;
		2501	btv->mbox_csel = 1 << 10;
		2502
		2503	freq=88000/62.5;
		2504	tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
		2505	if (0x1ed8 == tea5757_read(btv)) {
		2506	printk("bttv%d: Terratec Active Radio Upgrade found.\n",
		2507	btv->nr);
		2508	btv->has_radio = 1;
		2509	btv->has_matchbox = 1;
		2510	} else {
		2511	btv->has_radio = 0;
		2512	btv->has_matchbox = 0;
		2513	}
		2514	return 0;
		2515	}
		2516
		2517
		2518	/* ----------------------------------------------------------------------- */
		2519
		2520	/*
		2521	* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
		2522	*
		2523	* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
		2524	* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
		2525	* unpacked with unzip).
		2526	*/
		2527	#define PVR_GPIO_DELAY 10
		2528
		2529	#define BTTV_ALT_DATA 0x000001
		2530	#define BTTV_ALT_DCLK 0x100000
		2531	#define BTTV_ALT_NCONFIG 0x800000
		2532
		2533	static int __devinit pvr_altera_load(struct bttv btv, u8 micro, u32 microlen)
		2534	{
		2535	u32 n;
		2536	u8 bits;
		2537	int i;
		2538
		2539	btwrite(BTTV_ALT_DATA\|BTTV_ALT_DCLK\|BTTV_ALT_NCONFIG,
		2540	BT848_GPIO_OUT_EN);
		2541	btwrite(0,BT848_GPIO_DATA);
		2542	udelay(PVR_GPIO_DELAY);
		2543
		2544	btwrite(BTTV_ALT_NCONFIG,BT848_GPIO_DATA);
		2545	udelay(PVR_GPIO_DELAY);
		2546
		2547	for (n = 0; n < microlen; n++) {
		2548	bits = micro[n];
		2549	for ( i = 0 ; i < 8 ; i++ ) {
		2550	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2551	if (bits & 0x01)
		2552	btor(BTTV_ALT_DATA,BT848_GPIO_DATA);
		2553	else
		2554	btand(~BTTV_ALT_DATA,BT848_GPIO_DATA);
		2555	btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2556	bits >>= 1;
		2557	}
		2558	}
		2559	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2560	udelay(PVR_GPIO_DELAY);
		2561
		2562	/* begin Altera init loop (Not necessary,but doesn't hurt) */
		2563	for (i = 0 ; i < 30 ; i++) {
		2564	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2565	btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2566	}
		2567	btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
		2568	return 0;
		2569	}
		2570
		2571	#ifndef CONFIG_FW_LOADER
		2572	/* old 2.4.x way -- via soundcore's mod_firmware_load */
		2573
		2574	static char *firm_altera = "/usr/lib/video4linux/hcwamc.rbf";
		2575	MODULE_PARM(firm_altera,"s");
		2576	MODULE_PARM_DESC(firm_altera,"WinTV/PVR firmware "
		2577	"(driver CD => unzip pvr45xxx.exe => hcwamc.rbf)");
		2578
		2579	extern int mod_firmware_load(const char fn, char *fp);
		2580
		2581	int __devinit pvr_boot(struct bttv *btv)
		2582	{
		2583	u32 microlen;
		2584	u8 *micro;
		2585	int result;
		2586
516	giacomo	2587	microlen = 0;//mod_firmware_load(firm_altera, (char**) &micro);
428	giacomo	2588	if (!microlen) {
		2589	printk(KERN_WARNING "bttv%d: altera firmware not found [%s]\n",
		2590	btv->nr, firm_altera);
		2591	return -1;
		2592	}
		2593
		2594	printk(KERN_INFO "bttv%d: uploading altera firmware [%s] ...\n",
		2595	btv->nr, firm_altera);
		2596	result = pvr_altera_load(btv, micro, microlen);
		2597	printk(KERN_INFO "bttv%d: ... upload %s\n",
		2598	btv->nr, (result < 0) ? "failed" : "ok");
		2599	vfree(micro);
		2600	return result;
		2601	}
		2602	#else
		2603	/* new 2.5.x way -- via hotplug firmware loader */
		2604
		2605	int __devinit pvr_boot(struct bttv *btv)
		2606	{
		2607	const struct firmware *fw_entry;
		2608	int rc;
		2609
		2610	rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->dev->dev);
		2611	if (rc != 0) {
		2612	printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
		2613	btv->nr);
		2614	return rc;
170	giacomo	2615	}
428	giacomo	2616	rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
		2617	printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
		2618	btv->nr, (rc < 0) ? "failed" : "ok");
		2619	release_firmware(fw_entry);
		2620	return rc;
		2621	}
		2622	#endif
		2623
		2624	/* ----------------------------------------------------------------------- */
		2625	/* some osprey specific stuff */
		2626
		2627	static void __devinit osprey_eeprom(struct bttv *btv)
		2628	{
		2629	int i = 0;
		2630	unsigned char *ee = eeprom_data;
		2631	unsigned long serial = 0;
170	giacomo	2632
428	giacomo	2633	if (btv->type == 0) {
		2634	/* this might be an antique... check for MMAC label in eeprom */
		2635	if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
		2636	unsigned char checksum = 0;
		2637	for (i =0; i<21; i++)
		2638	checksum += ee[i];
		2639	if (checksum != ee[21])
		2640	return;
		2641	btv->type = BTTV_OSPREY1x0_848;
		2642	for (i = 12; i < 21; i++)
		2643	serial *= 10, serial += ee[i] - '0';
		2644	}
		2645	} else {
		2646	unsigned short type;
		2647	int offset = 4*16;
170	giacomo	2648
428	giacomo	2649	for(; offset < 8*16; offset += 16) {
		2650	unsigned short checksum = 0;
		2651	/* verify the checksum */
		2652	for(i = 0; i<14; i++) checksum += ee[i+offset];
		2653	checksum = ~checksum; /* no idea why */
		2654	if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
		2655	((checksum & 0x0FF) == ee[offset+15])) {
		2656	break;
		2657	}
		2658	}
170	giacomo	2659
428	giacomo	2660	if (offset >= 8*16)
		2661	return;
170	giacomo	2662
428	giacomo	2663	/* found a valid descriptor */
		2664	type = (ee[offset+4]<<8) \| (ee[offset+5]);
		2665
		2666	switch(type) {
170	giacomo	2667
428	giacomo	2668	/* 848 based */
		2669	case 0x0004:
		2670	btv->type = BTTV_OSPREY1x0_848;
		2671	break;
		2672	case 0x0005:
		2673	btv->type = BTTV_OSPREY101_848;
		2674	break;
		2675
		2676	/* 878 based */
		2677	case 0x0012:
		2678	case 0x0013:
		2679	btv->type = BTTV_OSPREY1x0;
		2680	break;
		2681	case 0x0014:
		2682	case 0x0015:
		2683	btv->type = BTTV_OSPREY1x1;
		2684	break;
		2685	case 0x0016:
		2686	case 0x0017:
		2687	case 0x0020:
		2688	btv->type = BTTV_OSPREY1x1_SVID;
		2689	break;
		2690	case 0x0018:
		2691	case 0x0019:
		2692	case 0x001E:
		2693	case 0x001F:
		2694	btv->type = BTTV_OSPREY2xx;
		2695	break;
		2696	case 0x001A:
		2697	case 0x001B:
		2698	btv->type = BTTV_OSPREY2x0_SVID;
		2699	break;
		2700	case 0x0040:
		2701	btv->type = BTTV_OSPREY500;
		2702	break;
		2703	case 0x0050:
		2704	case 0x0056:
		2705	btv->type = BTTV_OSPREY540;
		2706	/* bttv_osprey_540_init(btv); */
		2707	break;
		2708	case 0x0060:
		2709	case 0x0070:
		2710	btv->type = BTTV_OSPREY2x0;
		2711	//enable output on select control lines
		2712	btwrite(0x000303, BT848_GPIO_OUT_EN);
		2713	break;
		2714	default:
		2715	/* unknown...leave generic, but get serial # */
		2716	break;
		2717	}
		2718	serial = (ee[offset+6] << 24)
		2719	\| (ee[offset+7] << 16)
		2720	\| (ee[offset+8] << 8)
		2721	\| (ee[offset+9]);
		2722	}
		2723
		2724	printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
		2725	btv->nr, btv->type, bttv_tvcards[btv->type].name,serial);
		2726	}
		2727
170	giacomo	2728	/* ----------------------------------------------------------------------- */
		2729	/* AVermedia specific stuff, from bktr_card.c */
		2730
		2731	int tuner_0_table[] = {
428	giacomo	2732	TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
		2733	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
170	giacomo	2734	TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
		2735	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
		2736	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
		2737	#if 0
		2738	int tuner_0_fm_table[] = {
		2739	PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
		2740	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		2741	PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
		2742	PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
		2743	PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
		2744	#endif
		2745
		2746	int tuner_1_table[] = {
		2747	TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
		2748	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		2749	TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
		2750	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
		2751	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
		2752
428	giacomo	2753	static void __devinit avermedia_eeprom(struct bttv *btv)
170	giacomo	2754	{
428	giacomo	2755	int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
170	giacomo	2756
428	giacomo	2757	tuner_make = (eeprom_data[0x41] & 0x7);
		2758	tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
		2759	tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
		2760	btv->has_remote = (eeprom_data[0x42] & 0x01);
170	giacomo	2761
		2762	if (tuner_make == 0 \|\| tuner_make == 2)
		2763	if(tuner_format <=9)
		2764	tuner = tuner_0_table[tuner_format];
		2765	if (tuner_make == 1)
		2766	if(tuner_format <=9)
		2767	tuner = tuner_1_table[tuner_format];
		2768
428	giacomo	2769	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
170	giacomo	2770	btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
		2771	if(tuner) {
		2772	btv->tuner_type=tuner;
428	giacomo	2773	printk("%d",tuner);
170	giacomo	2774	} else
428	giacomo	2775	printk("Unknown type");
		2776	printk(" radio:%s remote control:%s\n",
		2777	tuner_tv_fm ? "yes" : "no",
		2778	btv->has_remote ? "yes" : "no");
170	giacomo	2779	}
		2780
		2781	/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
		2782	void bttv_tda9880_setnorm(struct bttv *btv, int norm)
		2783	{
		2784	// fix up our card entry
		2785	if(norm==VIDEO_MODE_NTSC) {
		2786	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
		2787	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
		2788	dprintk("bttv_tda9880_setnorm to NTSC\n");
		2789	}
		2790	else {
		2791	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
		2792	bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
		2793	dprintk("bttv_tda9880_setnorm to PAL\n");
		2794	}
		2795	// set GPIO according
428	giacomo	2796	btaor(bttv_tvcards[btv->type].audiomux[btv->audio],
		2797	~bttv_tvcards[btv->type].gpiomask, BT848_GPIO_DATA);
170	giacomo	2798	}
		2799
		2800
		2801	/*
		2802	* reset/enable the MSP on some Hauppauge cards
428	giacomo	2803	* Thanks to Ky�sti M�lkki (kmalkki@cc.hut.fi)!
170	giacomo	2804	*
		2805	* Hauppauge: pin 5
		2806	* Voodoo: pin 20
		2807	*/
428	giacomo	2808	static void __devinit boot_msp34xx(struct bttv *btv, int pin)
170	giacomo	2809	{
		2810	int mask = (1 << pin);
		2811
428	giacomo	2812	btaor(mask, ~mask, BT848_GPIO_OUT_EN);
		2813	btaor(0, ~mask, BT848_GPIO_DATA);
170	giacomo	2814	udelay(2500);
428	giacomo	2815	btaor(mask, ~mask, BT848_GPIO_DATA);
170	giacomo	2816	if (bttv_gpio)
		2817	bttv_gpio_tracking(btv,"msp34xx");
		2818
		2819	if (bttv_verbose)
		2820	printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
		2821	"init [%d]\n", btv->nr, pin);
		2822	}
		2823
428	giacomo	2824	static void __devinit boot_bt832(struct bttv *btv)
		2825	{
		2826	int outbits,databits,resetbit=0;
170	giacomo	2827
428	giacomo	2828	switch (btv->type) {
		2829	case BTTV_PXELVWPLTVPAK:
		2830	resetbit = 0x400000;
		2831	break;
		2832	case BTTV_MODTEC_205:
		2833	resetbit = 1<<9;
		2834	break;
		2835	default:
		2836	BUG();
		2837	}
		2838
		2839	request_module("bt832");
		2840	bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
		2841
		2842	printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->nr,resetbit);
		2843	btwrite(0, BT848_GPIO_DATA);
		2844	outbits = btread(BT848_GPIO_OUT_EN);
		2845	databits= btread(BT848_GPIO_DATA);
		2846	btwrite(resetbit, BT848_GPIO_OUT_EN);
		2847	udelay(5);
		2848	btwrite(resetbit, BT848_GPIO_DATA);
		2849	udelay(5);
		2850	btwrite(0, BT848_GPIO_DATA);
		2851	udelay(5);
		2852	btwrite(outbits, BT848_GPIO_OUT_EN);
		2853	btwrite(databits, BT848_GPIO_DATA);
		2854
		2855	// bt832 on pixelview changes from i2c 0x8a to 0x88 after
		2856	// being reset as above. So we must follow by this:
		2857	bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
		2858	}
		2859
170	giacomo	2860	/* ----------------------------------------------------------------------- */
		2861	/* Imagenation L-Model PXC200 Framegrabber */
		2862	/* This is basically the same procedure as
		2863	* used by Alessandro Rubini in his pxc200
		2864	* driver, but using BTTV functions */
		2865
428	giacomo	2866	static void __devinit init_PXC200(struct bttv *btv)
170	giacomo	2867	{
667	giacomo	2868	/*
428	giacomo	2869	static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
		2870	0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
		2871	0x00 };
667	giacomo	2872	*/
		2873	int val;
		2874
		2875	pll[btv->nr] = 28;
		2876
170	giacomo	2877	/* Initialise GPIO-connevted stuff */
		2878	btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
428	giacomo	2879	btwrite(0,BT848_GPIO_DATA);
170	giacomo	2880	udelay(3);
428	giacomo	2881	btwrite(1<<13,BT848_GPIO_DATA);
170	giacomo	2882	/* GPIO inputs are pulled up, so no need to drive
		2883	* reset pin any longer */
		2884	btwrite(0,BT848_GPIO_OUT_EN);
		2885	if (bttv_gpio)
		2886	bttv_gpio_tracking(btv,"pxc200");
		2887
		2888	/* we could/should try and reset/control the AD pots? but
		2889	right now we simply turned off the crushing. Without
		2890	this the AGC drifts drifts
		2891	remember the EN is reverse logic -->
		2892	setting BT848_ADC_AGC_EN disable the AGC
		2893	tboult@eecs.lehigh.edu
		2894	*/
428	giacomo	2895
170	giacomo	2896	btwrite(BT848_ADC_RESERVED\|BT848_ADC_AGC_EN, BT848_ADC);
		2897
		2898	/* Initialise MAX517 DAC */
		2899	printk(KERN_INFO "Setting DAC reference voltage level ...\n");
		2900	bttv_I2CWrite(btv,0x5E,0,0x80,1);
		2901
		2902	/* Initialise 12C508 PIC */
		2903	/* The I2CWrite and I2CRead commmands are actually to the
		2904	* same chips - but the R/W bit is included in the address
		2905	* argument so the numbers are different */
		2906
428	giacomo	2907
		2908	printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
		2909
		2910	/* First of all, enable the clock line. This is used in the PXC200-F */
		2911	val = btread(BT848_GPIO_DMA_CTL);
		2912	val \|= BT848_GPIO_DMA_CTL_GPCLKMODE;
		2913	btwrite(val, BT848_GPIO_DMA_CTL);
		2914
		2915	/* Then, push to 0 the reset pin long enough to reset the *
		2916	* device same as above for the reset line, but not the same
		2917	* value sent to the GPIO-connected stuff
		2918	* which one is the good one? */
		2919	btwrite( (1<<2), BT848_GPIO_OUT_EN); /* only the reset pin */
		2920	btwrite(0, BT848_GPIO_DATA);
		2921	udelay(10);
		2922	btwrite(1<<2, BT848_GPIO_DATA);
655	giacomo	2923	/*
428	giacomo	2924	for (i = 0; i < ARRAY_SIZE(vals); i++) {
		2925	tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
		2926	if (tmp != -1) {
		2927	printk(KERN_INFO
		2928	"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
		2929	vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
		2930	}
		2931	}
655	giacomo	2932	*/
170	giacomo	2933	printk(KERN_INFO "PXC200 Initialised.\n");
		2934	}
		2935
428	giacomo	2936
170	giacomo	2937	/* ----------------------------------------------------------------------- */
		2938	/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
		2939	/*
		2940	* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
		2941	* This code is placed under the terms of the GNU General Public License
		2942	*
		2943	* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
		2944	*/
		2945
428	giacomo	2946	void bus_low(struct bttv *btv, int bit)
		2947	{
		2948	if (btv->mbox_ior) {
		2949	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2950	BT848_GPIO_DATA);
		2951	udelay(5);
		2952	}
170	giacomo	2953
428	giacomo	2954	btand(~(bit), BT848_GPIO_DATA);
		2955	udelay(5);
170	giacomo	2956
428	giacomo	2957	if (btv->mbox_ior) {
		2958	btand(~(btv->mbox_iow \| btv->mbox_csel),
		2959	BT848_GPIO_DATA);
		2960	udelay(5);
		2961	}
		2962	}
		2963
		2964	void bus_high(struct bttv *btv, int bit)
		2965	{
		2966	if (btv->mbox_ior) {
		2967	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2968	BT848_GPIO_DATA);
		2969	udelay(5);
		2970	}
		2971
		2972	btor((bit), BT848_GPIO_DATA);
		2973	udelay(5);
		2974
		2975	if (btv->mbox_ior) {
		2976	btand(~(btv->mbox_iow \| btv->mbox_csel),
		2977	BT848_GPIO_DATA);
		2978	udelay(5);
		2979	}
		2980	}
		2981
		2982	int bus_in(struct bttv *btv, int bit)
		2983	{
		2984	if (btv->mbox_ior) {
		2985	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		2986	BT848_GPIO_DATA);
		2987	udelay(5);
		2988
		2989	btand(~(btv->mbox_ior \| btv->mbox_csel),
		2990	BT848_GPIO_DATA);
		2991	udelay(5);
		2992	}
		2993	return btread(BT848_GPIO_DATA) & (bit);
		2994	}
		2995
170	giacomo	2996	/* TEA5757 register bits */
		2997	#define TEA_FREQ 0:14
		2998	#define TEA_BUFFER 15:15
		2999
		3000	#define TEA_SIGNAL_STRENGTH 16:17
		3001
		3002	#define TEA_PORT1 18:18
		3003	#define TEA_PORT0 19:19
		3004
		3005	#define TEA_BAND 20:21
		3006	#define TEA_BAND_FM 0
		3007	#define TEA_BAND_MW 1
		3008	#define TEA_BAND_LW 2
		3009	#define TEA_BAND_SW 3
		3010
		3011	#define TEA_MONO 22:22
		3012	#define TEA_ALLOW_STEREO 0
		3013	#define TEA_FORCE_MONO 1
		3014
		3015	#define TEA_SEARCH_DIRECTION 23:23
		3016	#define TEA_SEARCH_DOWN 0
		3017	#define TEA_SEARCH_UP 1
		3018
		3019	#define TEA_STATUS 24:24
		3020	#define TEA_STATUS_TUNED 0
		3021	#define TEA_STATUS_SEARCHING 1
		3022
464	giacomo	3023	extern unsigned long read_time(void);
		3024
428	giacomo	3025	/* Low-level stuff */
		3026	static int tea5757_read(struct bttv *btv)
		3027	{
		3028	unsigned long timeout;
		3029	int value = 0;
		3030	int i;
		3031
		3032	/* better safe than sorry */
		3033	btaor((btv->mbox_clk \| btv->mbox_we),
		3034	~btv->mbox_mask, BT848_GPIO_OUT_EN);
		3035
		3036	if (btv->mbox_ior) {
		3037	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		3038	BT848_GPIO_DATA);
		3039	udelay(5);
		3040	}
		3041
		3042	if (bttv_gpio)
		3043	bttv_gpio_tracking(btv,"tea5757 read");
		3044
		3045	bus_low(btv,btv->mbox_we);
		3046	bus_low(btv,btv->mbox_clk);
		3047
		3048	udelay(10);
464	giacomo	3049	timeout= read_time() + 1000000;
428	giacomo	3050
		3051	// wait for DATA line to go low; error if it doesn't
464	giacomo	3052	while (bus_in(btv,btv->mbox_data) && timeout > read_time());
428	giacomo	3053	if (bus_in(btv,btv->mbox_data)) {
		3054	printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->nr);
		3055	return -1;
		3056	}
		3057
		3058	dprintk("bttv%d: tea5757:",btv->nr);
		3059	for(i = 0; i < 24; i++)
		3060	{
		3061	udelay(5);
		3062	bus_high(btv,btv->mbox_clk);
		3063	udelay(5);
		3064	dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
		3065	bus_low(btv,btv->mbox_clk);
		3066	value <<= 1;
		3067	value \|= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
		3068	dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
		3069	}
		3070	dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->nr, value);
		3071	return value;
		3072	}
		3073
		3074	static int tea5757_write(struct bttv *btv, int value)
		3075	{
		3076	int i;
		3077	int reg = value;
		3078
		3079	btaor(btv->mbox_clk \| btv->mbox_we \| btv->mbox_data,
		3080	~btv->mbox_mask, BT848_GPIO_OUT_EN);
		3081
		3082	if (btv->mbox_ior) {
		3083	btor(btv->mbox_ior \| btv->mbox_iow \| btv->mbox_csel,
		3084	BT848_GPIO_DATA);
		3085	udelay(5);
		3086	}
		3087	if (bttv_gpio)
		3088	bttv_gpio_tracking(btv,"tea5757 write");
		3089
		3090	dprintk("bttv%d: tea5757: write 0x%X\n", btv->nr, value);
		3091	bus_low(btv,btv->mbox_clk);
		3092	bus_high(btv,btv->mbox_we);
		3093	for(i = 0; i < 25; i++)
		3094	{
		3095	if (reg & 0x1000000)
		3096	bus_high(btv,btv->mbox_data);
		3097	else
		3098	bus_low(btv,btv->mbox_data);
		3099	reg <<= 1;
		3100	bus_high(btv,btv->mbox_clk);
		3101	udelay(10);
		3102	bus_low(btv,btv->mbox_clk);
		3103	udelay(10);
		3104	}
		3105	bus_low(btv,btv->mbox_we); /* unmute !!! */
		3106	return 0;
		3107	}
		3108
		3109	void tea5757_set_freq(struct bttv *btv, unsigned short freq)
		3110	{
		3111	dprintk("tea5757_set_freq %d\n",freq);
		3112	tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
		3113	#if 0
		3114	/* breaks Miro PCTV */
		3115	value = tea5757_read(btv);
		3116	dprintk("bttv%d: tea5757 readback=0x%x\n",btv->nr,value);
		3117	#endif
		3118	}
		3119
		3120
170	giacomo	3121	/* ----------------------------------------------------------------------- */
		3122	/* winview */
		3123
		3124	void winview_audio(struct bttv btv, struct video_audio v, int set)
		3125	{
		3126	/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
		3127	int bits_out, loops, vol, data;
		3128
		3129	if (!set) {
		3130	/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
		3131	v->flags \|= VIDEO_AUDIO_VOLUME;
		3132	return;
		3133	}
		3134
		3135	/* 32 levels logarithmic */
		3136	vol = 32 - ((v->volume>>11));
		3137	/* units */
		3138	bits_out = (PT2254_DBS_IN_2>>(vol%5));
		3139	/* tens */
		3140	bits_out \|= (PT2254_DBS_IN_10>>(vol/5));
		3141	bits_out \|= PT2254_L_CHANNEL \| PT2254_R_CHANNEL;
428	giacomo	3142	data = btread(BT848_GPIO_DATA);
170	giacomo	3143	data &= ~(WINVIEW_PT2254_CLK\| WINVIEW_PT2254_DATA\|
		3144	WINVIEW_PT2254_STROBE);
		3145	for (loops = 17; loops >= 0 ; loops--) {
		3146	if (bits_out & (1<<loops))
		3147	data \|= WINVIEW_PT2254_DATA;
		3148	else
		3149	data &= ~WINVIEW_PT2254_DATA;
428	giacomo	3150	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3151	udelay(5);
		3152	data \|= WINVIEW_PT2254_CLK;
428	giacomo	3153	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3154	udelay(5);
		3155	data &= ~WINVIEW_PT2254_CLK;
428	giacomo	3156	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3157	}
		3158	data \|= WINVIEW_PT2254_STROBE;
		3159	data &= ~WINVIEW_PT2254_DATA;
428	giacomo	3160	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3161	udelay(10);
		3162	data &= ~WINVIEW_PT2254_STROBE;
428	giacomo	3163	btwrite(data, BT848_GPIO_DATA);
170	giacomo	3164	}
		3165
		3166	/* ----------------------------------------------------------------------- */
		3167	/* mono/stereo control for various cards (which don't use i2c chips but */
		3168	/* connect something to the GPIO pins */
		3169
		3170	static void
		3171	gvbctv3pci_audio(struct bttv btv, struct video_audio v, int set)
		3172	{
		3173	unsigned int con = 0;
		3174
		3175	if (set) {
		3176	btor(0x300, BT848_GPIO_OUT_EN);
		3177	if (v->mode & VIDEO_SOUND_LANG1)
		3178	con = 0x000;
		3179	if (v->mode & VIDEO_SOUND_LANG2)
		3180	con = 0x300;
		3181	if (v->mode & VIDEO_SOUND_STEREO)
		3182	con = 0x200;
		3183	// if (v->mode & VIDEO_SOUND_MONO)
		3184	// con = 0x100;
428	giacomo	3185	btaor(con, ~0x300, BT848_GPIO_DATA);
170	giacomo	3186	} else {
		3187	v->mode = VIDEO_SOUND_STEREO \|
		3188	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3189	}
		3190	}
		3191
		3192	/*
		3193	* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
		3194	* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
		3195	* 0xdde enables mono and 0xccd enables sap
		3196	*
		3197	* Petr Vandrovec <VANDROVE@vc.cvut.cz>
		3198	* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
		3199	* input/output sound connection, so both must be set for output mode.
		3200	*
		3201	* Looks like it's needed only for the "tvphone", the "tvphone 98"
		3202	* handles this with a tda9840
		3203	*
		3204	*/
		3205	static void
		3206	avermedia_tvphone_audio(struct bttv btv, struct video_audio v, int set)
		3207	{
		3208	int val = 0;
		3209
		3210	if (set) {
		3211	if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
		3212	val = 0x02;
		3213	if (v->mode & VIDEO_SOUND_STEREO)
		3214	val = 0x01;
		3215	if (val) {
428	giacomo	3216	btaor(val, ~0x03, BT848_GPIO_DATA);
170	giacomo	3217	if (bttv_gpio)
		3218	bttv_gpio_tracking(btv,"avermedia");
		3219	}
		3220	} else {
		3221	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3222	VIDEO_SOUND_LANG1;
		3223	return;
		3224	}
		3225	}
		3226
		3227	/* Lifetec 9415 handling */
		3228	static void
		3229	lt9415_audio(struct bttv btv, struct video_audio v, int set)
		3230	{
		3231	int val = 0;
		3232
428	giacomo	3233	if (btread(BT848_GPIO_DATA) & 0x4000) {
170	giacomo	3234	v->mode = VIDEO_SOUND_MONO;
		3235	return;
		3236	}
		3237
		3238	if (set) {
		3239	if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
		3240	val = 0x0080;
		3241	if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
		3242	val = 0x0880;
		3243	if ((v->mode & VIDEO_SOUND_LANG1) \|\|
		3244	(v->mode & VIDEO_SOUND_MONO))
		3245	val = 0;
428	giacomo	3246	btaor(val, ~0x0880, BT848_GPIO_DATA);
170	giacomo	3247	if (bttv_gpio)
		3248	bttv_gpio_tracking(btv,"lt9415");
		3249	} else {
		3250	/* autodetect doesn't work with this card :-( */
		3251	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3252	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3253	return;
		3254	}
		3255	}
		3256
428	giacomo	3257	// TDA9821 on TerraTV+ Bt848, Bt878
170	giacomo	3258	static void
		3259	terratv_audio(struct bttv btv, struct video_audio v, int set)
		3260	{
		3261	unsigned int con = 0;
		3262
		3263	if (set) {
		3264	btor(0x180000, BT848_GPIO_OUT_EN);
		3265	if (v->mode & VIDEO_SOUND_LANG2)
		3266	con = 0x080000;
		3267	if (v->mode & VIDEO_SOUND_STEREO)
		3268	con = 0x180000;
428	giacomo	3269	btaor(con, ~0x180000, BT848_GPIO_DATA);
170	giacomo	3270	if (bttv_gpio)
		3271	bttv_gpio_tracking(btv,"terratv");
		3272	} else {
		3273	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3274	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3275	}
		3276	}
		3277
		3278	static void
		3279	winfast2000_audio(struct bttv btv, struct video_audio v, int set)
		3280	{
		3281	unsigned long val = 0;
		3282
		3283	if (set) {
		3284	/btor (0xc32000, BT848_GPIO_OUT_EN);/
		3285	if (v->mode & VIDEO_SOUND_MONO) /* Mono */
		3286	val = 0x420000;
		3287	if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
		3288	val = 0x420000;
		3289	if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
		3290	val = 0x410000;
		3291	if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
		3292	val = 0x020000;
		3293	if (val) {
428	giacomo	3294	btaor(val, ~0x430000, BT848_GPIO_DATA);
170	giacomo	3295	if (bttv_gpio)
		3296	bttv_gpio_tracking(btv,"winfast2000");
		3297	}
		3298	} else {
		3299	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3300	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3301	}
		3302	}
		3303
		3304	/*
		3305	* Dariusz Kowalewski <darekk@automex.pl>
		3306	* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
		3307	* revision 9B has on-board TDA9874A sound decoder).
428	giacomo	3308	*
		3309	* Note: There are card variants without tda9874a. Forcing the "stereo sound route"
		3310	* will mute this cards.
170	giacomo	3311	*/
		3312	static void
		3313	pvbt878p9b_audio(struct bttv btv, struct video_audio v, int set)
		3314	{
		3315	unsigned int val = 0;
		3316
428	giacomo	3317	#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
		3318	if (btv->radio_user)
		3319	return;
		3320	#else
170	giacomo	3321	if (btv->radio)
		3322	return;
428	giacomo	3323	#endif
170	giacomo	3324
		3325	if (set) {
		3326	if (v->mode & VIDEO_SOUND_MONO) {
		3327	val = 0x01;
		3328	}
		3329	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		3330	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		3331	val = 0x02;
		3332	}
		3333	if (val) {
428	giacomo	3334	btaor(val, ~0x03, BT848_GPIO_DATA);
170	giacomo	3335	if (bttv_gpio)
		3336	bttv_gpio_tracking(btv,"pvbt878p9b");
		3337	}
		3338	} else {
		3339	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3340	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3341	}
		3342	}
		3343
		3344	/*
		3345	* Dariusz Kowalewski <darekk@automex.pl>
		3346	* sound control for FlyVideo 2000S (with tda9874 decoder)
		3347	* based on pvbt878p9b_audio() - this is not tested, please fix!!!
		3348	*/
		3349	static void
		3350	fv2000s_audio(struct bttv btv, struct video_audio v, int set)
		3351	{
		3352	unsigned int val = 0xffff;
		3353
428	giacomo	3354	#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
		3355	if (btv->radio_user)
		3356	return;
		3357	#else
170	giacomo	3358	if (btv->radio)
		3359	return;
428	giacomo	3360	#endif
170	giacomo	3361	if (set) {
		3362	if (v->mode & VIDEO_SOUND_MONO) {
		3363	val = 0x0000;
		3364	}
		3365	if ((v->mode & (VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2))
		3366	\|\| (v->mode & VIDEO_SOUND_STEREO)) {
		3367	val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
		3368	}
		3369	if (val != 0xffff) {
428	giacomo	3370	btaor(val, ~0x1800, BT848_GPIO_DATA);
170	giacomo	3371	if (bttv_gpio)
		3372	bttv_gpio_tracking(btv,"fv2000s");
		3373	}
		3374	} else {
		3375	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3376	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3377	}
		3378	}
		3379
		3380	/*
		3381	* sound control for Canopus WinDVR PCI
		3382	* Masaki Suzuki <masaki@btree.org>
		3383	*/
		3384	static void
		3385	windvr_audio(struct bttv btv, struct video_audio v, int set)
		3386	{
		3387	unsigned long val = 0;
		3388
		3389	if (set) {
		3390	if (v->mode & VIDEO_SOUND_MONO)
		3391	val = 0x040000;
		3392	if (v->mode & VIDEO_SOUND_LANG1)
		3393	val = 0;
		3394	if (v->mode & VIDEO_SOUND_LANG2)
		3395	val = 0x100000;
		3396	if (v->mode & VIDEO_SOUND_STEREO)
		3397	val = 0;
		3398	if (val) {
428	giacomo	3399	btaor(val, ~0x140000, BT848_GPIO_DATA);
170	giacomo	3400	if (bttv_gpio)
		3401	bttv_gpio_tracking(btv,"windvr");
		3402	}
		3403	} else {
		3404	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3405	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3406	}
		3407	}
		3408
428	giacomo	3409	/*
		3410	* sound control for AD-TVK503
		3411	* Hiroshi Takekawa <sian@big.or.jp>
		3412	*/
		3413	static void
		3414	adtvk503_audio(struct bttv btv, struct video_audio v, int set)
		3415	{
		3416	unsigned int con = 0xffffff;
		3417
		3418	//btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
		3419
		3420	if (set) {
		3421	//btor(***, BT848_GPIO_OUT_EN);
		3422	if (v->mode & VIDEO_SOUND_LANG1)
		3423	con = 0x00000000;
		3424	if (v->mode & VIDEO_SOUND_LANG2)
		3425	con = 0x00180000;
		3426	if (v->mode & VIDEO_SOUND_STEREO)
		3427	con = 0x00000000;
		3428	if (v->mode & VIDEO_SOUND_MONO)
		3429	con = 0x00060000;
		3430	if (con != 0xffffff) {
		3431	btaor(con, ~0x1e0000, BT848_GPIO_DATA);
		3432	if (bttv_gpio)
		3433	bttv_gpio_tracking(btv, "adtvk503");
		3434	}
		3435	} else {
		3436	v->mode = VIDEO_SOUND_MONO \| VIDEO_SOUND_STEREO \|
		3437	VIDEO_SOUND_LANG1 \| VIDEO_SOUND_LANG2;
		3438	}
		3439	}
		3440
170	giacomo	3441	/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
		3442	*
		3443	* This is needed because rv605 don't use a normal multiplex, but a crosspoint
		3444	* switch instead (CD22M3494E). This IC can have multiple active connections
		3445	* between Xn (input) and Yn (output) pins. We need to clear any existing
		3446	* connection prior to establish a new one, pulsing the STROBE pin.
		3447	*
		3448	* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
		3449	* GPIO pins are wired as:
		3450	* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
		3451	* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
		3452	* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
		3453	* GPIO[8] - - P3[5] (microcontroler)
		3454	* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
		3455	* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
		3456	* GPINTR - - P3[4] (microcontroler)
		3457	*
		3458	* The microcontroler is a 80C32 like. It should be possible to change xpoint
		3459	* configuration either directly (as we are doing) or using the microcontroler
		3460	* which is also wired to I2C interface. I have no further info on the
		3461	* microcontroler features, one would need to disassembly the firmware.
		3462	* note: the vendor refused to give any information on this product, all
		3463	* that stuff was found using a multimeter! :)
		3464	*/
		3465	static void rv605_muxsel(struct bttv *btv, unsigned int input)
		3466	{
		3467	/* reset all conections */
428	giacomo	3468	btaor(0x200,~0x200, BT848_GPIO_DATA);
		3469	mdelay(1);
		3470	btaor(0x000,~0x200, BT848_GPIO_DATA);
		3471	mdelay(1);
170	giacomo	3472
		3473	/* create a new conection */
428	giacomo	3474	btaor(0x080,~0x480, BT848_GPIO_DATA);
		3475	btaor(0x480,~0x480, BT848_GPIO_DATA);
		3476	mdelay(1);
		3477	btaor(0x080,~0x480, BT848_GPIO_DATA);
		3478	mdelay(1);
170	giacomo	3479	}
		3480
428	giacomo	3481	// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
		3482	// video multiplexers to provide up to 16 video inputs. These
		3483	// multiplexers are controlled by the lower 8 GPIO pins of the
		3484	// bt878. The multiplexers probably Pericom PI5V331Q or similar.
170	giacomo	3485
428	giacomo	3486	// xxx0 is pin xxx of multiplexer U5,
		3487	// yyy1 is pin yyy of multiplexer U2
		3488
		3489	#define ENA0 0x01
		3490	#define ENB0 0x02
		3491	#define ENA1 0x04
		3492	#define ENB1 0x08
		3493
		3494	#define IN10 0x10
		3495	#define IN00 0x20
		3496	#define IN11 0x40
		3497	#define IN01 0x80
		3498
		3499	static void xguard_muxsel(struct bttv *btv, unsigned int input)
		3500	{
		3501	static const int masks[] = {
		3502	ENB0, ENB0\|IN00, ENB0\|IN10, ENB0\|IN00\|IN10,
		3503	ENA0, ENA0\|IN00, ENA0\|IN10, ENA0\|IN00\|IN10,
		3504	ENB1, ENB1\|IN01, ENB1\|IN11, ENB1\|IN01\|IN11,
		3505	ENA1, ENA1\|IN01, ENA1\|IN11, ENA1\|IN01\|IN11,
		3506	};
		3507	btwrite(masks[input%16], BT848_GPIO_DATA);
		3508	}
		3509
		3510	/*
		3511	* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
		3512	*
		3513	* The IVC120G security card has 4 i2c controlled TDA8540 matrix
		3514	* swichers to provide 16 channels to MUX0. The TDA8540's have
		3515	* 4 indepedant outputs and as such the IVC120G also has the
		3516	* optional "Monitor Out" bus. This allows the card to be looking
		3517	* at one input while the monitor is looking at another.
		3518	*
		3519	* Since I've couldn't be bothered figuring out how to add an
		3520	* independant muxsel for the monitor bus, I've just set it to
		3521	* whatever the card is looking at.
		3522	*
		3523	* OUT0 of the TDA8540's is connected to MUX0 (0x03)
		3524	* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
		3525	*
		3526	* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
		3527	* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
		3528	* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
		3529	* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
		3530	*
		3531	*/
		3532
		3533	/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
		3534	#define I2C_TDA8540 0x90
		3535	#define I2C_TDA8540_ALT1 0x92
		3536	#define I2C_TDA8540_ALT2 0x94
		3537	#define I2C_TDA8540_ALT3 0x96
		3538	#define I2C_TDA8540_ALT4 0x98
		3539	#define I2C_TDA8540_ALT5 0x9a
		3540	#define I2C_TDA8540_ALT6 0x9c
		3541
		3542	static void ivc120_muxsel(struct bttv *btv, unsigned int input)
		3543	{
		3544	// Simple maths
		3545	int key = input % 4;
		3546	int matrix = input / 4;
		3547
		3548	dprintk("bttv%d: ivc120_muxsel: Input - %02d \| TDA - %02d \| In - %02d\n",
		3549	btv->nr, input, matrix, key);
		3550
		3551	// Handles the input selection on the TDA8540's
		3552	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
		3553	((matrix == 3) ? (key \| key << 2) : 0x00), 1);
		3554	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
		3555	((matrix == 0) ? (key \| key << 2) : 0x00), 1);
		3556	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
		3557	((matrix == 1) ? (key \| key << 2) : 0x00), 1);
		3558	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
		3559	((matrix == 2) ? (key \| key << 2) : 0x00), 1);
		3560
		3561	// Handles the output enables on the TDA8540's
		3562	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
		3563	((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
		3564	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
		3565	((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
		3566	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
		3567	((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
		3568	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
		3569	((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
		3570
		3571	// Selects MUX0 for input on the 878
		3572	btaor((0)<<5, ~(3<<5), BT848_IFORM);
		3573	}
		3574
		3575
170	giacomo	3576	/* ----------------------------------------------------------------------- */
		3577	/* motherboard chipset specific stuff */
		3578
428	giacomo	3579	void __devinit bttv_check_chipset(void)
170	giacomo	3580	{
		3581	int pcipci_fail = 0;
428	giacomo	3582	struct pci_dev *dev = NULL;
170	giacomo	3583
428	giacomo	3584	if (pci_pci_problems & PCIPCI_FAIL)
		3585	pcipci_fail = 1;
		3586	if (pci_pci_problems & (PCIPCI_TRITON\|PCIPCI_NATOMA\|PCIPCI_VIAETBF))
		3587	triton1 = 1;
		3588	if (pci_pci_problems & PCIPCI_VSFX)
		3589	vsfx = 1;
		3590	#ifdef PCIPCI_ALIMAGIK
		3591	if (pci_pci_problems & PCIPCI_ALIMAGIK)
		3592	latency = 0x0A;
		3593	#endif
		3594
		3595	#if 0
		3596	/* print which chipset we have */
		3597	while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
		3598	printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
		3599	#endif
		3600
170	giacomo	3601	/* print warnings about any quirks found */
		3602	if (triton1)
		3603	printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
		3604	if (vsfx)
		3605	printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
		3606	if (pcipci_fail) {
		3607	printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
428	giacomo	3608	if (UNSET == no_overlay) {
170	giacomo	3609	printk(KERN_WARNING "bttv: going to disable overlay.\n");
		3610	no_overlay = 1;
		3611	}
		3612	}
428	giacomo	3613	if (UNSET != latency)
		3614	printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
170	giacomo	3615
428	giacomo	3616	while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
		3617	PCI_DEVICE_ID_INTEL_82441, dev))) {
170	giacomo	3618	unsigned char b;
428	giacomo	3619	pci_read_config_byte(dev, 0x53, &b);
170	giacomo	3620	if (bttv_debug)
		3621	printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
		3622	"bufcon=0x%02x\n",b);
		3623	}
		3624	}
		3625
428	giacomo	3626	int __devinit bttv_handle_chipset(struct bttv *btv)
170	giacomo	3627	{
		3628	unsigned char command;
		3629
428	giacomo	3630	if (!triton1 && !vsfx && UNSET == latency)
170	giacomo	3631	return 0;
		3632
		3633	if (bttv_verbose) {
		3634	if (triton1)
		3635	printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
		3636	if (vsfx && btv->id >= 878)
		3637	printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
428	giacomo	3638	if (UNSET != latency)
		3639	printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
		3640	btv->nr,latency);
170	giacomo	3641	}
		3642
		3643	if (btv->id < 878) {
		3644	/* bt848 (mis)uses a bit in the irq mask for etbf */
		3645	if (triton1)
		3646	btv->triton1 = BT848_INT_ETBF;
		3647	} else {
		3648	/* bt878 has a bit in the pci config space for it */
		3649	pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
		3650	if (triton1)
		3651	command \|= BT878_EN_TBFX;
		3652	if (vsfx)
		3653	command \|= BT878_EN_VSFX;
		3654	pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
		3655	}
428	giacomo	3656	if (UNSET != latency)
		3657	pci_write_config_byte(btv->dev, PCI_LATENCY_TIMER, latency);
170	giacomo	3658	return 0;
		3659	}
		3660
428	giacomo	3661
		3662	/*
		3663	* Local variables:
		3664	* c-basic-offset: 8
		3665	* End:
		3666	*/

Subversion Repositories shark

(root)/shark/trunk/drivers/bttv/bttv-cards.c - Rev 667