Subversion Repositories shark

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
422 giacomo 1
#ifndef _LINUX_HDREG_H
2
#define _LINUX_HDREG_H
3
 
4
/*
5
 * This file contains some defines for the AT-hd-controller.
6
 * Various sources.
7
 */
8
 
9
/* ide.c has its own port definitions in "ide.h" */
10
 
11
#define HD_IRQ          14
12
 
13
/* Hd controller regs. Ref: IBM AT Bios-listing */
14
#define HD_DATA         0x1f0           /* _CTL when writing */
15
#define HD_ERROR        0x1f1           /* see err-bits */
16
#define HD_NSECTOR      0x1f2           /* nr of sectors to read/write */
17
#define HD_SECTOR       0x1f3           /* starting sector */
18
#define HD_LCYL         0x1f4           /* starting cylinder */
19
#define HD_HCYL         0x1f5           /* high byte of starting cyl */
20
#define HD_CURRENT      0x1f6           /* 101dhhhh , d=drive, hhhh=head */
21
#define HD_STATUS       0x1f7           /* see status-bits */
22
#define HD_FEATURE      HD_ERROR        /* same io address, read=error, write=feature */
23
#define HD_PRECOMP      HD_FEATURE      /* obsolete use of this port - predates IDE */
24
#define HD_COMMAND      HD_STATUS       /* same io address, read=status, write=cmd */
25
 
26
#define HD_CMD          0x3f6           /* used for resets */
27
#define HD_ALTSTATUS    0x3f6           /* same as HD_STATUS but doesn't clear irq */
28
 
29
/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
30
 
31
/* Bits of HD_STATUS */
32
#define ERR_STAT                0x01
33
#define INDEX_STAT              0x02
34
#define ECC_STAT                0x04    /* Corrected error */
35
#define DRQ_STAT                0x08
36
#define SEEK_STAT               0x10
37
#define SRV_STAT                0x10
38
#define WRERR_STAT              0x20
39
#define READY_STAT              0x40
40
#define BUSY_STAT               0x80
41
 
42
/* Bits for HD_ERROR */
43
#define MARK_ERR                0x01    /* Bad address mark */
44
#define TRK0_ERR                0x02    /* couldn't find track 0 */
45
#define ABRT_ERR                0x04    /* Command aborted */
46
#define MCR_ERR                 0x08    /* media change request */
47
#define ID_ERR                  0x10    /* ID field not found */
48
#define MC_ERR                  0x20    /* media changed */
49
#define ECC_ERR                 0x40    /* Uncorrectable ECC error */
50
#define BBD_ERR                 0x80    /* pre-EIDE meaning:  block marked bad */
51
#define ICRC_ERR                0x80    /* new meaning:  CRC error during transfer */
52
 
53
/* Bits of HD_NSECTOR */
54
#define CD                      0x01
55
#define IO                      0x02
56
#define REL                     0x04
57
#define TAG_MASK                0xf8
58
 
59
 
60
/*
61
 * Command Header sizes for IOCTL commands
62
 */
63
 
64
#define HDIO_DRIVE_CMD_HDR_SIZE         (4 * sizeof(u8))
65
#define HDIO_DRIVE_HOB_HDR_SIZE         (8 * sizeof(u8))
66
#define HDIO_DRIVE_TASK_HDR_SIZE        (8 * sizeof(u8))
67
 
68
#define IDE_DRIVE_TASK_INVALID          -1
69
#define IDE_DRIVE_TASK_NO_DATA          0
70
#define IDE_DRIVE_TASK_SET_XFER         1
71
 
72
#define IDE_DRIVE_TASK_IN               2
73
 
74
#define IDE_DRIVE_TASK_OUT              3
75
#define IDE_DRIVE_TASK_RAW_WRITE        4
76
 
77
/*
78
 * Define standard taskfile in/out register
79
 */
80
#define IDE_TASKFILE_STD_OUT_FLAGS      0xFE
81
#define IDE_TASKFILE_STD_IN_FLAGS       0xFE
82
#define IDE_HOB_STD_OUT_FLAGS           0x3C
83
#define IDE_HOB_STD_IN_FLAGS            0x3C
84
 
85
typedef unsigned char task_ioreg_t;
86
typedef unsigned long sata_ioreg_t;
87
 
88
typedef union ide_reg_valid_s {
89
        unsigned all                            : 16;
90
        struct {
91
                unsigned data                   : 1;
92
                unsigned error_feature          : 1;
93
                unsigned sector                 : 1;
94
                unsigned nsector                : 1;
95
                unsigned lcyl                   : 1;
96
                unsigned hcyl                   : 1;
97
                unsigned select                 : 1;
98
                unsigned status_command         : 1;
99
 
100
                unsigned data_hob               : 1;
101
                unsigned error_feature_hob      : 1;
102
                unsigned sector_hob             : 1;
103
                unsigned nsector_hob            : 1;
104
                unsigned lcyl_hob               : 1;
105
                unsigned hcyl_hob               : 1;
106
                unsigned select_hob             : 1;
107
                unsigned control_hob            : 1;
108
        } b;
109
} ide_reg_valid_t;
110
 
111
typedef struct ide_task_request_s {
112
        task_ioreg_t    io_ports[8];
113
        task_ioreg_t    hob_ports[8];
114
        ide_reg_valid_t out_flags;
115
        ide_reg_valid_t in_flags;
116
        int             data_phase;
117
        int             req_cmd;
118
        unsigned long   out_size;
119
        unsigned long   in_size;
120
} ide_task_request_t;
121
 
122
typedef struct ide_ioctl_request_s {
123
        ide_task_request_t      *task_request;
124
        unsigned char           *out_buffer;
125
        unsigned char           *in_buffer;
126
} ide_ioctl_request_t;
127
 
128
struct hd_drive_cmd_hdr {
129
        task_ioreg_t command;
130
        task_ioreg_t sector_number;
131
        task_ioreg_t feature;
132
        task_ioreg_t sector_count;
133
};
134
 
135
typedef struct hd_drive_task_hdr {
136
        task_ioreg_t data;
137
        task_ioreg_t feature;
138
        task_ioreg_t sector_count;
139
        task_ioreg_t sector_number;
140
        task_ioreg_t low_cylinder;
141
        task_ioreg_t high_cylinder;
142
        task_ioreg_t device_head;
143
        task_ioreg_t command;
144
} task_struct_t;
145
 
146
typedef struct hd_drive_hob_hdr {
147
        task_ioreg_t data;
148
        task_ioreg_t feature;
149
        task_ioreg_t sector_count;
150
        task_ioreg_t sector_number;
151
        task_ioreg_t low_cylinder;
152
        task_ioreg_t high_cylinder;
153
        task_ioreg_t device_head;
154
        task_ioreg_t control;
155
} hob_struct_t;
156
 
157
#define TASKFILE_INVALID                0x7fff
158
#define TASKFILE_48                     0x8000
159
 
160
#define TASKFILE_NO_DATA                0x0000
161
 
162
#define TASKFILE_IN                     0x0001
163
#define TASKFILE_MULTI_IN               0x0002
164
 
165
#define TASKFILE_OUT                    0x0004
166
#define TASKFILE_MULTI_OUT              0x0008
167
#define TASKFILE_IN_OUT                 0x0010
168
 
169
#define TASKFILE_IN_DMA                 0x0020
170
#define TASKFILE_OUT_DMA                0x0040
171
#define TASKFILE_IN_DMAQ                0x0080
172
#define TASKFILE_OUT_DMAQ               0x0100
173
 
174
#define TASKFILE_P_IN                   0x0200
175
#define TASKFILE_P_OUT                  0x0400
176
#define TASKFILE_P_IN_DMA               0x0800
177
#define TASKFILE_P_OUT_DMA              0x1000
178
#define TASKFILE_P_IN_DMAQ              0x2000
179
#define TASKFILE_P_OUT_DMAQ             0x4000
180
 
181
/* ATA/ATAPI Commands pre T13 Spec */
182
#define WIN_NOP                         0x00
183
/*
184
 *      0x01->0x02 Reserved
185
 */
186
#define CFA_REQ_EXT_ERROR_CODE          0x03 /* CFA Request Extended Error Code */
187
/*
188
 *      0x04->0x07 Reserved
189
 */
190
#define WIN_SRST                        0x08 /* ATAPI soft reset command */
191
#define WIN_DEVICE_RESET                0x08
192
/*
193
 *      0x09->0x0F Reserved
194
 */
195
#define WIN_RECAL                       0x10
196
#define WIN_RESTORE                     WIN_RECAL
197
/*
198
 *      0x10->0x1F Reserved
199
 */
200
#define WIN_READ                        0x20 /* 28-Bit */
201
#define WIN_READ_ONCE                   0x21 /* 28-Bit without retries */
202
#define WIN_READ_LONG                   0x22 /* 28-Bit */
203
#define WIN_READ_LONG_ONCE              0x23 /* 28-Bit without retries */
204
#define WIN_READ_EXT                    0x24 /* 48-Bit */
205
#define WIN_READDMA_EXT                 0x25 /* 48-Bit */
206
#define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit */
207
#define WIN_READ_NATIVE_MAX_EXT         0x27 /* 48-Bit */
208
/*
209
 *      0x28
210
 */
211
#define WIN_MULTREAD_EXT                0x29 /* 48-Bit */
212
/*
213
 *      0x2A->0x2F Reserved
214
 */
215
#define WIN_WRITE                       0x30 /* 28-Bit */
216
#define WIN_WRITE_ONCE                  0x31 /* 28-Bit without retries */
217
#define WIN_WRITE_LONG                  0x32 /* 28-Bit */
218
#define WIN_WRITE_LONG_ONCE             0x33 /* 28-Bit without retries */
219
#define WIN_WRITE_EXT                   0x34 /* 48-Bit */
220
#define WIN_WRITEDMA_EXT                0x35 /* 48-Bit */
221
#define WIN_WRITEDMA_QUEUED_EXT         0x36 /* 48-Bit */
222
#define WIN_SET_MAX_EXT                 0x37 /* 48-Bit */
223
#define CFA_WRITE_SECT_WO_ERASE         0x38 /* CFA Write Sectors without erase */
224
#define WIN_MULTWRITE_EXT               0x39 /* 48-Bit */
225
/*
226
 *      0x3A->0x3B Reserved
227
 */
228
#define WIN_WRITE_VERIFY                0x3C /* 28-Bit */
229
/*
230
 *      0x3D->0x3F Reserved
231
 */
232
#define WIN_VERIFY                      0x40 /* 28-Bit - Read Verify Sectors */
233
#define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - without retries */
234
#define WIN_VERIFY_EXT                  0x42 /* 48-Bit */
235
/*
236
 *      0x43->0x4F Reserved
237
 */
238
#define WIN_FORMAT                      0x50
239
/*
240
 *      0x51->0x5F Reserved
241
 */
242
#define WIN_INIT                        0x60
243
/*
244
 *      0x61->0x5F Reserved
245
 */
246
#define WIN_SEEK                        0x70 /* 0x70-0x7F Reserved */
247
 
248
#define CFA_TRANSLATE_SECTOR            0x87 /* CFA Translate Sector */
249
#define WIN_DIAGNOSE                    0x90
250
#define WIN_SPECIFY                     0x91 /* set drive geometry translation */
251
#define WIN_DOWNLOAD_MICROCODE          0x92
252
#define WIN_STANDBYNOW2                 0x94
253
#define WIN_STANDBY2                    0x96
254
#define WIN_SETIDLE2                    0x97
255
#define WIN_CHECKPOWERMODE2             0x98
256
#define WIN_SLEEPNOW2                   0x99
257
/*
258
 *      0x9A VENDOR
259
 */
260
#define WIN_PACKETCMD                   0xA0 /* Send a packet command. */
261
#define WIN_PIDENTIFY                   0xA1 /* identify ATAPI device   */
262
#define WIN_QUEUED_SERVICE              0xA2
263
#define WIN_SMART                       0xB0 /* self-monitoring and reporting */
264
#define CFA_ERASE_SECTORS               0xC0
265
#define WIN_MULTREAD                    0xC4 /* read sectors using multiple mode*/
266
#define WIN_MULTWRITE                   0xC5 /* write sectors using multiple mode */
267
#define WIN_SETMULT                     0xC6 /* enable/disable multiple mode */
268
#define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers */
269
#define WIN_READDMA                     0xC8 /* read sectors using DMA transfers */
270
#define WIN_READDMA_ONCE                0xC9 /* 28-Bit - without retries */
271
#define WIN_WRITEDMA                    0xCA /* write sectors using DMA transfers */
272
#define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - without retries */
273
#define WIN_WRITEDMA_QUEUED             0xCC /* write sectors using Queued DMA transfers */
274
#define CFA_WRITE_MULTI_WO_ERASE        0xCD /* CFA Write multiple without erase */
275
#define WIN_GETMEDIASTATUS              0xDA
276
#define WIN_ACKMEDIACHANGE              0xDB /* ATA-1, ATA-2 vendor */
277
#define WIN_POSTBOOT                    0xDC
278
#define WIN_PREBOOT                     0xDD
279
#define WIN_DOORLOCK                    0xDE /* lock door on removable drives */
280
#define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives */
281
#define WIN_STANDBYNOW1                 0xE0
282
#define WIN_IDLEIMMEDIATE               0xE1 /* force drive to become "ready" */
283
#define WIN_STANDBY                     0xE2 /* Set device in Standby Mode */
284
#define WIN_SETIDLE1                    0xE3
285
#define WIN_READ_BUFFER                 0xE4 /* force read only 1 sector */
286
#define WIN_CHECKPOWERMODE1             0xE5
287
#define WIN_SLEEPNOW1                   0xE6
288
#define WIN_FLUSH_CACHE                 0xE7
289
#define WIN_WRITE_BUFFER                0xE8 /* force write only 1 sector */
290
#define WIN_WRITE_SAME                  0xE9 /* read ata-2 to use */
291
        /* SET_FEATURES 0x22 or 0xDD */
292
#define WIN_FLUSH_CACHE_EXT             0xEA /* 48-Bit */
293
#define WIN_IDENTIFY                    0xEC /* ask drive to identify itself    */
294
#define WIN_MEDIAEJECT                  0xED
295
#define WIN_IDENTIFY_DMA                0xEE /* same as WIN_IDENTIFY, but DMA */
296
#define WIN_SETFEATURES                 0xEF /* set special drive features */
297
#define EXABYTE_ENABLE_NEST             0xF0
298
#define WIN_SECURITY_SET_PASS           0xF1
299
#define WIN_SECURITY_UNLOCK             0xF2
300
#define WIN_SECURITY_ERASE_PREPARE      0xF3
301
#define WIN_SECURITY_ERASE_UNIT         0xF4
302
#define WIN_SECURITY_FREEZE_LOCK        0xF5
303
#define WIN_SECURITY_DISABLE            0xF6
304
#define WIN_READ_NATIVE_MAX             0xF8 /* return the native maximum address */
305
#define WIN_SET_MAX                     0xF9
306
#define DISABLE_SEAGATE                 0xFB
307
 
308
/* WIN_SMART sub-commands */
309
 
310
#define SMART_READ_VALUES               0xD0
311
#define SMART_READ_THRESHOLDS           0xD1
312
#define SMART_AUTOSAVE                  0xD2
313
#define SMART_SAVE                      0xD3
314
#define SMART_IMMEDIATE_OFFLINE         0xD4
315
#define SMART_READ_LOG_SECTOR           0xD5
316
#define SMART_WRITE_LOG_SECTOR          0xD6
317
#define SMART_WRITE_THRESHOLDS          0xD7
318
#define SMART_ENABLE                    0xD8
319
#define SMART_DISABLE                   0xD9
320
#define SMART_STATUS                    0xDA
321
#define SMART_AUTO_OFFLINE              0xDB
322
 
323
/* Password used in TF4 & TF5 executing SMART commands */
324
 
325
#define SMART_LCYL_PASS                 0x4F
326
#define SMART_HCYL_PASS                 0xC2
327
 
328
/* WIN_SETFEATURES sub-commands */
329
#define SETFEATURES_EN_8BIT     0x01    /* Enable 8-Bit Transfers */
330
#define SETFEATURES_EN_WCACHE   0x02    /* Enable write cache */
331
#define SETFEATURES_XFER        0x03    /* Set transfer mode */
332
#       define XFER_UDMA_7      0x47    /* 0100|0111 */
333
#       define XFER_UDMA_6      0x46    /* 0100|0110 */
334
#       define XFER_UDMA_5      0x45    /* 0100|0101 */
335
#       define XFER_UDMA_4      0x44    /* 0100|0100 */
336
#       define XFER_UDMA_3      0x43    /* 0100|0011 */
337
#       define XFER_UDMA_2      0x42    /* 0100|0010 */
338
#       define XFER_UDMA_1      0x41    /* 0100|0001 */
339
#       define XFER_UDMA_0      0x40    /* 0100|0000 */
340
#       define XFER_MW_DMA_2    0x22    /* 0010|0010 */
341
#       define XFER_MW_DMA_1    0x21    /* 0010|0001 */
342
#       define XFER_MW_DMA_0    0x20    /* 0010|0000 */
343
#       define XFER_SW_DMA_2    0x12    /* 0001|0010 */
344
#       define XFER_SW_DMA_1    0x11    /* 0001|0001 */
345
#       define XFER_SW_DMA_0    0x10    /* 0001|0000 */
346
#       define XFER_PIO_4       0x0C    /* 0000|1100 */
347
#       define XFER_PIO_3       0x0B    /* 0000|1011 */
348
#       define XFER_PIO_2       0x0A    /* 0000|1010 */
349
#       define XFER_PIO_1       0x09    /* 0000|1001 */
350
#       define XFER_PIO_0       0x08    /* 0000|1000 */
351
#       define XFER_PIO_SLOW    0x00    /* 0000|0000 */
352
#define SETFEATURES_DIS_DEFECT  0x04    /* Disable Defect Management */
353
#define SETFEATURES_EN_APM      0x05    /* Enable advanced power management */
354
#define SETFEATURES_EN_SAME_R   0x22    /* for a region ATA-1 */
355
#define SETFEATURES_DIS_MSN     0x31    /* Disable Media Status Notification */
356
#define SETFEATURES_DIS_RETRY   0x33    /* Disable Retry */
357
#define SETFEATURES_EN_AAM      0x42    /* Enable Automatic Acoustic Management */
358
#define SETFEATURES_RW_LONG     0x44    /* Set Length of VS bytes */
359
#define SETFEATURES_SET_CACHE   0x54    /* Set Cache segments to SC Reg. Val */
360
#define SETFEATURES_DIS_RLA     0x55    /* Disable read look-ahead feature */
361
#define SETFEATURES_EN_RI       0x5D    /* Enable release interrupt */
362
#define SETFEATURES_EN_SI       0x5E    /* Enable SERVICE interrupt */
363
#define SETFEATURES_DIS_RPOD    0x66    /* Disable reverting to power on defaults */
364
#define SETFEATURES_DIS_ECC     0x77    /* Disable ECC byte count */
365
#define SETFEATURES_DIS_8BIT    0x81    /* Disable 8-Bit Transfers */
366
#define SETFEATURES_DIS_WCACHE  0x82    /* Disable write cache */
367
#define SETFEATURES_EN_DEFECT   0x84    /* Enable Defect Management */
368
#define SETFEATURES_DIS_APM     0x85    /* Disable advanced power management */
369
#define SETFEATURES_EN_ECC      0x88    /* Enable ECC byte count */
370
#define SETFEATURES_EN_MSN      0x95    /* Enable Media Status Notification */
371
#define SETFEATURES_EN_RETRY    0x99    /* Enable Retry */
372
#define SETFEATURES_EN_RLA      0xAA    /* Enable read look-ahead feature */
373
#define SETFEATURES_PREFETCH    0xAB    /* Sets drive prefetch value */
374
#define SETFEATURES_EN_REST     0xAC    /* ATA-1 */
375
#define SETFEATURES_4B_RW_LONG  0xBB    /* Set Lenght of 4 bytes */
376
#define SETFEATURES_DIS_AAM     0xC2    /* Disable Automatic Acoustic Management */
377
#define SETFEATURES_EN_RPOD     0xCC    /* Enable reverting to power on defaults */
378
#define SETFEATURES_DIS_RI      0xDD    /* Disable release interrupt ATAPI */
379
#define SETFEATURES_EN_SAME_M   0xDD    /* for a entire device ATA-1 */
380
#define SETFEATURES_DIS_SI      0xDE    /* Disable SERVICE interrupt ATAPI */
381
 
382
/* WIN_SECURITY sub-commands */
383
 
384
#define SECURITY_SET_PASSWORD           0xBA
385
#define SECURITY_UNLOCK                 0xBB
386
#define SECURITY_ERASE_PREPARE          0xBC
387
#define SECURITY_ERASE_UNIT             0xBD
388
#define SECURITY_FREEZE_LOCK            0xBE
389
#define SECURITY_DISABLE_PASSWORD       0xBF
390
 
391
struct hd_geometry {
392
      unsigned char heads;
393
      unsigned char sectors;
394
      unsigned short cylinders;
395
      unsigned long start;
396
};
397
 
398
/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
399
#define HDIO_GETGEO             0x0301  /* get device geometry */
400
#define HDIO_GET_UNMASKINTR     0x0302  /* get current unmask setting */
401
#define HDIO_GET_MULTCOUNT      0x0304  /* get current IDE blockmode setting */
402
#define HDIO_GET_QDMA           0x0305  /* get use-qdma flag */
403
 
404
#define HDIO_SET_XFER           0x0306  /* set transfer rate via proc */
405
 
406
#define HDIO_OBSOLETE_IDENTITY  0x0307  /* OBSOLETE, DO NOT USE: returns 142 bytes */
407
#define HDIO_GET_KEEPSETTINGS   0x0308  /* get keep-settings-on-reset flag */
408
#define HDIO_GET_32BIT          0x0309  /* get current io_32bit setting */
409
#define HDIO_GET_NOWERR         0x030a  /* get ignore-write-error flag */
410
#define HDIO_GET_DMA            0x030b  /* get use-dma flag */
411
#define HDIO_GET_NICE           0x030c  /* get nice flags */
412
#define HDIO_GET_IDENTITY       0x030d  /* get IDE identification info */
413
#define HDIO_GET_WCACHE         0x030e  /* get write cache mode on|off */
414
#define HDIO_GET_ACOUSTIC       0x030f  /* get acoustic value */
415
#define HDIO_GET_ADDRESS        0x0310  /* */
416
 
417
#define HDIO_GET_BUSSTATE       0x031a  /* get the bus state of the hwif */
418
#define HDIO_TRISTATE_HWIF      0x031b  /* execute a channel tristate */
419
#define HDIO_DRIVE_RESET        0x031c  /* execute a device reset */
420
#define HDIO_DRIVE_TASKFILE     0x031d  /* execute raw taskfile */
421
#define HDIO_DRIVE_TASK         0x031e  /* execute task and special drive command */
422
#define HDIO_DRIVE_CMD          0x031f  /* execute a special drive command */
423
#define HDIO_DRIVE_CMD_AEB      HDIO_DRIVE_TASK
424
 
425
/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
426
#define HDIO_SET_MULTCOUNT      0x0321  /* change IDE blockmode */
427
#define HDIO_SET_UNMASKINTR     0x0322  /* permit other irqs during I/O */
428
#define HDIO_SET_KEEPSETTINGS   0x0323  /* keep ioctl settings on reset */
429
#define HDIO_SET_32BIT          0x0324  /* change io_32bit flags */
430
#define HDIO_SET_NOWERR         0x0325  /* change ignore-write-error flag */
431
#define HDIO_SET_DMA            0x0326  /* change use-dma flag */
432
#define HDIO_SET_PIO_MODE       0x0327  /* reconfig interface to new speed */
433
#define HDIO_SCAN_HWIF          0x0328  /* register and (re)scan interface */
434
#define HDIO_SET_NICE           0x0329  /* set nice flags */
435
#define HDIO_UNREGISTER_HWIF    0x032a  /* unregister interface */
436
#define HDIO_SET_WCACHE         0x032b  /* change write cache enable-disable */
437
#define HDIO_SET_ACOUSTIC       0x032c  /* change acoustic behavior */
438
#define HDIO_SET_BUSSTATE       0x032d  /* set the bus state of the hwif */
439
#define HDIO_SET_QDMA           0x032e  /* change use-qdma flag */
440
#define HDIO_SET_ADDRESS        0x032f  /* change lba addressing modes */
441
 
442
/* bus states */
443
enum {
444
        BUSSTATE_OFF = 0,
445
        BUSSTATE_ON,
446
        BUSSTATE_TRISTATE
447
};
448
 
449
/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
450
/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
451
/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
452
 
453
#define HDIO_SET_IDE_SCSI      0x0338
454
#define HDIO_SET_SCSI_IDE      0x0339
455
 
456
#define __NEW_HD_DRIVE_ID
457
 
458
/*
459
 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
460
 *
461
 * If you change something here, please remember to update fix_driveid() in
462
 * ide/probe.c.
463
 */
464
struct hd_driveid {
465
        unsigned short  config;         /* lots of obsolete bit flags */
466
        unsigned short  cyls;           /* Obsolete, "physical" cyls */
467
        unsigned short  reserved2;      /* reserved (word 2) */
468
        unsigned short  heads;          /* Obsolete, "physical" heads */
469
        unsigned short  track_bytes;    /* unformatted bytes per track */
470
        unsigned short  sector_bytes;   /* unformatted bytes per sector */
471
        unsigned short  sectors;        /* Obsolete, "physical" sectors per track */
472
        unsigned short  vendor0;        /* vendor unique */
473
        unsigned short  vendor1;        /* vendor unique */
474
        unsigned short  vendor2;        /* Retired vendor unique */
475
        unsigned char   serial_no[20];  /* 0 = not_specified */
476
        unsigned short  buf_type;       /* Retired */
477
        unsigned short  buf_size;       /* Retired, 512 byte increments
478
                                         * 0 = not_specified
479
                                         */
480
        unsigned short  ecc_bytes;      /* for r/w long cmds; 0 = not_specified */
481
        unsigned char   fw_rev[8];      /* 0 = not_specified */
482
        unsigned char   model[40];      /* 0 = not_specified */
483
        unsigned char   max_multsect;   /* 0=not_implemented */
484
        unsigned char   vendor3;        /* vendor unique */
485
        unsigned short  dword_io;       /* 0=not_implemented; 1=implemented */
486
        unsigned char   vendor4;        /* vendor unique */
487
        unsigned char   capability;     /* (upper byte of word 49)
488
                                         *  3:  IORDYsup
489
                                         *  2:  IORDYsw
490
                                         *  1:  LBA
491
                                         *  0:  DMA
492
                                         */
493
        unsigned short  reserved50;     /* reserved (word 50) */
494
        unsigned char   vendor5;        /* Obsolete, vendor unique */
495
        unsigned char   tPIO;           /* Obsolete, 0=slow, 1=medium, 2=fast */
496
        unsigned char   vendor6;        /* Obsolete, vendor unique */
497
        unsigned char   tDMA;           /* Obsolete, 0=slow, 1=medium, 2=fast */
498
        unsigned short  field_valid;    /* (word 53)
499
                                         *  2:  ultra_ok        word  88
500
                                         *  1:  eide_ok         words 64-70
501
                                         *  0:  cur_ok          words 54-58
502
                                         */
503
        unsigned short  cur_cyls;       /* Obsolete, logical cylinders */
504
        unsigned short  cur_heads;      /* Obsolete, l heads */
505
        unsigned short  cur_sectors;    /* Obsolete, l sectors per track */
506
        unsigned short  cur_capacity0;  /* Obsolete, l total sectors on drive */
507
        unsigned short  cur_capacity1;  /* Obsolete, (2 words, misaligned int)     */
508
        unsigned char   multsect;       /* current multiple sector count */
509
        unsigned char   multsect_valid; /* when (bit0==1) multsect is ok */
510
        unsigned int    lba_capacity;   /* Obsolete, total number of sectors */
511
        unsigned short  dma_1word;      /* Obsolete, single-word dma info */
512
        unsigned short  dma_mword;      /* multiple-word dma info */
513
        unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
514
        unsigned short  eide_dma_min;   /* min mword dma cycle time (ns) */
515
        unsigned short  eide_dma_time;  /* recommended mword dma cycle time (ns) */
516
        unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
517
        unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
518
        unsigned short  words69_70[2];  /* reserved words 69-70
519
                                         * future command overlap and queuing
520
                                         */
521
        /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
522
        unsigned short  words71_74[4];  /* reserved words 71-74
523
                                         * for IDENTIFY PACKET DEVICE command
524
                                         */
525
        unsigned short  queue_depth;    /* (word 75)
526
                                         * 15:5 reserved
527
                                         *  4:0 Maximum queue depth -1
528
                                         */
529
        unsigned short  words76_79[4];  /* reserved words 76-79 */
530
        unsigned short  major_rev_num;  /* (word 80) */
531
        unsigned short  minor_rev_num;  /* (word 81) */
532
        unsigned short  command_set_1;  /* (word 82) supported
533
                                         * 15:  Obsolete
534
                                         * 14:  NOP command
535
                                         * 13:  READ_BUFFER
536
                                         * 12:  WRITE_BUFFER
537
                                         * 11:  Obsolete
538
                                         * 10:  Host Protected Area
539
                                         *  9:  DEVICE Reset
540
                                         *  8:  SERVICE Interrupt
541
                                         *  7:  Release Interrupt
542
                                         *  6:  look-ahead
543
                                         *  5:  write cache
544
                                         *  4:  PACKET Command
545
                                         *  3:  Power Management Feature Set
546
                                         *  2:  Removable Feature Set
547
                                         *  1:  Security Feature Set
548
                                         *  0:  SMART Feature Set
549
                                         */
550
        unsigned short  command_set_2;  /* (word 83)
551
                                         * 15:  Shall be ZERO
552
                                         * 14:  Shall be ONE
553
                                         * 13:  FLUSH CACHE EXT
554
                                         * 12:  FLUSH CACHE
555
                                         * 11:  Device Configuration Overlay
556
                                         * 10:  48-bit Address Feature Set
557
                                         *  9:  Automatic Acoustic Management
558
                                         *  8:  SET MAX security
559
                                         *  7:  reserved 1407DT PARTIES
560
                                         *  6:  SetF sub-command Power-Up
561
                                         *  5:  Power-Up in Standby Feature Set
562
                                         *  4:  Removable Media Notification
563
                                         *  3:  APM Feature Set
564
                                         *  2:  CFA Feature Set
565
                                         *  1:  READ/WRITE DMA QUEUED
566
                                         *  0:  Download MicroCode
567
                                         */
568
        unsigned short  cfsse;          /* (word 84)
569
                                         * cmd set-feature supported extensions
570
                                         * 15:  Shall be ZERO
571
                                         * 14:  Shall be ONE
572
                                         * 13:6 reserved
573
                                         *  5:  General Purpose Logging
574
                                         *  4:  Streaming Feature Set
575
                                         *  3:  Media Card Pass Through
576
                                         *  2:  Media Serial Number Valid
577
                                         *  1:  SMART selt-test supported
578
                                         *  0:  SMART error logging
579
                                         */
580
        unsigned short  cfs_enable_1;   /* (word 85)
581
                                         * command set-feature enabled
582
                                         * 15:  Obsolete
583
                                         * 14:  NOP command
584
                                         * 13:  READ_BUFFER
585
                                         * 12:  WRITE_BUFFER
586
                                         * 11:  Obsolete
587
                                         * 10:  Host Protected Area
588
                                         *  9:  DEVICE Reset
589
                                         *  8:  SERVICE Interrupt
590
                                         *  7:  Release Interrupt
591
                                         *  6:  look-ahead
592
                                         *  5:  write cache
593
                                         *  4:  PACKET Command
594
                                         *  3:  Power Management Feature Set
595
                                         *  2:  Removable Feature Set
596
                                         *  1:  Security Feature Set
597
                                         *  0:  SMART Feature Set
598
                                         */
599
        unsigned short  cfs_enable_2;   /* (word 86)
600
                                         * command set-feature enabled
601
                                         * 15:  Shall be ZERO
602
                                         * 14:  Shall be ONE
603
                                         * 13:  FLUSH CACHE EXT
604
                                         * 12:  FLUSH CACHE
605
                                         * 11:  Device Configuration Overlay
606
                                         * 10:  48-bit Address Feature Set
607
                                         *  9:  Automatic Acoustic Management
608
                                         *  8:  SET MAX security
609
                                         *  7:  reserved 1407DT PARTIES
610
                                         *  6:  SetF sub-command Power-Up
611
                                         *  5:  Power-Up in Standby Feature Set
612
                                         *  4:  Removable Media Notification
613
                                         *  3:  APM Feature Set
614
                                         *  2:  CFA Feature Set
615
                                         *  1:  READ/WRITE DMA QUEUED
616
                                         *  0:  Download MicroCode
617
                                         */
618
        unsigned short  csf_default;    /* (word 87)
619
                                         * command set-feature default
620
                                         * 15:  Shall be ZERO
621
                                         * 14:  Shall be ONE
622
                                         * 13:6 reserved
623
                                         *  5:  General Purpose Logging enabled
624
                                         *  4:  Valid CONFIGURE STREAM executed
625
                                         *  3:  Media Card Pass Through enabled
626
                                         *  2:  Media Serial Number Valid
627
                                         *  1:  SMART selt-test supported
628
                                         *  0:  SMART error logging
629
                                         */
630
        unsigned short  dma_ultra;      /* (word 88) */
631
        unsigned short  trseuc;         /* time required for security erase */
632
        unsigned short  trsEuc;         /* time required for enhanced erase */
633
        unsigned short  CurAPMvalues;   /* current APM values */
634
        unsigned short  mprc;           /* master password revision code */
635
        unsigned short  hw_config;      /* hardware config (word 93)
636
                                         * 15:  Shall be ZERO
637
                                         * 14:  Shall be ONE
638
                                         * 13:
639
                                         * 12:
640
                                         * 11:
641
                                         * 10:
642
                                         *  9:
643
                                         *  8:
644
                                         *  7:
645
                                         *  6:
646
                                         *  5:
647
                                         *  4:
648
                                         *  3:
649
                                         *  2:
650
                                         *  1:
651
                                         *  0:  Shall be ONE
652
                                         */
653
        unsigned short  acoustic;       /* (word 94)
654
                                         * 15:8 Vendor's recommended value
655
                                         *  7:0 current value
656
                                         */
657
        unsigned short  msrqs;          /* min stream request size */
658
        unsigned short  sxfert;         /* stream transfer time */
659
        unsigned short  sal;            /* stream access latency */
660
        unsigned int    spg;            /* stream performance granularity */
661
        unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
662
        unsigned short  words104_125[22];/* reserved words 104-125 */
663
        unsigned short  last_lun;       /* (word 126) */
664
        unsigned short  word127;        /* (word 127) Feature Set
665
                                         * Removable Media Notification
666
                                         * 15:2 reserved
667
                                         *  1:0 00 = not supported
668
                                         *      01 = supported
669
                                         *      10 = reserved
670
                                         *      11 = reserved
671
                                         */
672
        unsigned short  dlf;            /* (word 128)
673
                                         * device lock function
674
                                         * 15:9 reserved
675
                                         *  8   security level 1:max 0:high
676
                                         *  7:6 reserved
677
                                         *  5   enhanced erase
678
                                         *  4   expire
679
                                         *  3   frozen
680
                                         *  2   locked
681
                                         *  1   en/disabled
682
                                         *  0   capability
683
                                         */
684
        unsigned short  csfo;           /*  (word 129)
685
                                         * current set features options
686
                                         * 15:4 reserved
687
                                         *  3:  auto reassign
688
                                         *  2:  reverting
689
                                         *  1:  read-look-ahead
690
                                         *  0:  write cache
691
                                         */
692
        unsigned short  words130_155[26];/* reserved vendor words 130-155 */
693
        unsigned short  word156;        /* reserved vendor word 156 */
694
        unsigned short  words157_159[3];/* reserved vendor words 157-159 */
695
        unsigned short  cfa_power;      /* (word 160) CFA Power Mode
696
                                         * 15 word 160 supported
697
                                         * 14 reserved
698
                                         * 13
699
                                         * 12
700
                                         * 11:0
701
                                         */
702
        unsigned short  words161_175[15];/* Reserved for CFA */
703
        unsigned short  words176_205[30];/* Current Media Serial Number */
704
        unsigned short  words206_254[49];/* reserved words 206-254 */
705
        unsigned short  integrity_word; /* (word 255)
706
                                         * 15:8 Checksum
707
                                         *  7:0 Signature
708
                                         */
709
};
710
 
711
/*
712
 * IDE "nice" flags. These are used on a per drive basis to determine
713
 * when to be nice and give more bandwidth to the other devices which
714
 * share the same IDE bus.
715
 */
716
#define IDE_NICE_DSC_OVERLAP    (0)     /* per the DSC overlap protocol */
717
#define IDE_NICE_ATAPI_OVERLAP  (1)     /* not supported yet */
718
#define IDE_NICE_0              (2)     /* when sure that it won't affect us */
719
#define IDE_NICE_1              (3)     /* when probably won't affect us much */
720
#define IDE_NICE_2              (4)     /* when we know it's on our expense */
721
 
722
#endif  /* _LINUX_HDREG_H */