WebSVN - shark - Blame - Rev 1398 - /shark/trunk/kernel/signal.c

Rev	Author	Line No.	Line
2	pj	1	/*
		2	* Project: S.Ha.R.K.
		3	*
		4	* Coordinators:
		5	* Giorgio Buttazzo <giorgio@sssup.it>
		6	* Paolo Gai <pj@gandalf.sssup.it>
		7	*
		8	* Authors :
		9	* Paolo Gai <pj@gandalf.sssup.it>
		10	* (see the web pages for full authors list)
		11	*
		12	* ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
		13	*
		14	* http://www.sssup.it
		15	* http://retis.sssup.it
		16	* http://shark.sssup.it
		17	*/
		18
		19	/**
		20	------------
1077	fabio	21	CVS : $Id: signal.c,v 1.16 2007-05-04 10:53:30 fabio Exp $
2	pj	22
		23	File: $File$
1077	fabio	24	Revision: $Revision: 1.16 $
		25	Last update: $Date: 2007-05-04 10:53:30 $
2	pj	26	------------
		27
		28	This file contains:
		29
		30	Signal Handling
		31
		32	- Data structures
		33	- sigset_t handling functions
		34
		35	**/
		36
		37	/*
		38	* Copyright (C) 2000 Paolo Gai
		39	*
		40	* This program is free software; you can redistribute it and/or modify
		41	* it under the terms of the GNU General Public License as published by
		42	* the Free Software Foundation; either version 2 of the License, or
		43	* (at your option) any later version.
		44	*
		45	* This program is distributed in the hope that it will be useful,
		46	* but WITHOUT ANY WARRANTY; without even the implied warranty of
		47	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		48	* GNU General Public License for more details.
		49	*
		50	* You should have received a copy of the GNU General Public License
		51	* along with this program; if not, write to the Free Software
		52	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
		53	*
		54	*/
		55
		56	/*
		57	* some functions are inspired on the implementation of OsKit..
		58	*
		59	* Copyright (c) 1997, 1998, 1999 University of Utah and the Flux Group.
		60	* All rights reserved.
		61	*
		62	* [...] The OSKit is free software, also known
		63	* as "open source;" you can redistribute it and/or modify it under the terms
		64	* of the GNU General Public License (GPL), version 2, as published by the Free
		65	* Software Foundation (FSF). To explore alternate licensing terms, contact
		66	* the University of Utah at csl-dist@cs.utah.edu or +1-801-585-3271.
		67	*
		68	* The OSKit is distributed in the hope that it will be useful, but WITHOUT ANY
		69	* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
		70	* FOR A PARTICULAR PURPOSE. See the GPL for more details. You should have
		71	* received a copy of the GPL along with the OSKit; see the file COPYING. If
		72	* not, write to the FSF, 59 Temple Place #330, Boston, MA 02111-1307, USA.
		73	*/
		74
		75
		76
		77	#include <ll/ll.h>
		78	#include <ll/stdlib.h>
		79	#include <ll/stdio.h>
		80	#include <ll/i386/pic.h>
		81	#include <signal.h>
		82	#include <errno.h>
		83	#include <kernel/descr.h>
		84	#include <kernel/var.h>
		85	#include <kernel/func.h>
		86
353	giacomo	87	#include <tracer.h>
		88
2	pj	89	/* look at nanoslp.c */
		90	int nanosleep_interrupted_by_signal(PID i);
		91
		92
		93	/---------------------------------------------------------------------/
		94	/* Data structures */
		95	/---------------------------------------------------------------------/
		96
		97	/+ A flag, see kern_raise +/
		98	static int active_exc = 0;
		99
		100	/+ The signal table... +/
		101	static struct sigaction sigactions[SIG_MAX];
		102
		103	/*+ There is a global (or "process") set of pending signals.
		104	kill() and sigqueue() affect the process pending set.
		105	+*/
		106	static sigset_t procsigpending;
		107
		108	/*
		109	* A queue of all threads waiting in sigwait.
496	giacomo	110	* It is not static because it is used into the task_kill...� */
29	pj	111	static IQUEUE sigwaiters;
2	pj	112
		113
		114	/+ An array of queues of pending signals posted with sigqueue(). +/
		115	static SIGQ sigqueued[SIG_MAX];
		116
		117	/*+ We avoid malloc in interrupt handlers by preallocating the queue
		118	entries for sig_queued above.
		119	it is used also in kernel/time.c +*/
		120	SIGQ sigqueue_free;
		121
		122	/+ this is the signal queue... +/
		123	sig_queue_entry sig_queue[SIGQUEUE_MAX];
		124
		125	/+ alarm stuffs +/
		126	static struct timespec alarm_time;
		127	static int alarm_timer;
		128
		129
		130	/* returns the first non-zero bit... */
		131	static int ffs(int value)
		132	{
		133	int x;
		134
		135	for (x=0; value; x++, value = value>>1)
		136	if (value & 1)
		137	return x;
		138	return 0;
		139	}
		140
		141	/---------------------------------------------------------------------/
		142	/* interruptable function registration... */
		143	/---------------------------------------------------------------------/
		144
		145
		146	/*+ this structure contains the functions to be called to test if a
		147	task is blocked on a cancellation point +*/
		148	static struct {
		149	int (test)(PID p, void arg);
		150	void *arg;
		151	} interruptable_table[MAX_SIGINTPOINTS];
		152
		153	static int interruptable_points = 0;
		154
		155
		156	/*+ This function register a cancellation point into the system.
		157	Be careful!!! no check are performed... +*/
		158	void register_interruptable_point(int (func)(PID p, void arg), void *arg)
		159	{
		160	interruptable_table[interruptable_points].test = func;
		161	interruptable_table[interruptable_points].arg = arg;
		162	interruptable_points++;
		163	}
		164
		165	static void test_interruptable_points(PID i)
		166	{
		167	int j;
		168
		169	/* check if the task is blocked on a cancellation point */
		170	for (j=0; j<interruptable_points; j++)
		171	if (interruptable_table[j].test(i,interruptable_table[j].arg))
		172	break;
		173	}
		174
		175
		176	/---------------------------------------------------------------------/
		177	/* sigset_t handling functions */
		178	/---------------------------------------------------------------------/
		179
		180	/* These functions will become soon macros... */
		181	int sigemptyset(sigset_t *set)
		182	{
		183	*set = 0;
		184
		185	return 0;
		186	}
		187
		188	int sigfillset(sigset_t *set)
		189	{
		190	*set=0xFFFFFFFFUL;
		191
		192	return 0;
		193	}
		194
		195	int sigaddset(sigset_t *set, int signo)
		196	{
		197	if (signo < 0 \|\| signo >= SIG_MAX)
		198	{
		199	errno = EINVAL;
		200	return -1;
		201	}
		202
		203	*set \|= 1 << signo;
		204	return 0;
		205	}
		206
		207
		208	int sigdelset(sigset_t *set, int signo)
		209	{
		210	if (signo < 0 \|\| signo >= SIG_MAX)
		211	{
		212	errno = EINVAL;
		213	return -1;
		214	}
		215
		216	*set &= ~(1 << signo);
		217	return 0;
		218	}
		219
		220	int sigismember(const sigset_t *set, int signo)
		221	{
		222	if (signo < 0 \|\| signo >= SIG_MAX)
		223	{
		224	errno = EINVAL;
		225	return -1;
		226	}
		227
		228	return *set & (1 << signo );
		229	}
		230
		231
		232	/---------------------------------------------------------------------/
		233	/* Finally, the public functions */
		234	/---------------------------------------------------------------------/
		235
		236	/*
		237	* Prototypes.
		238	*/
		239	void really_deliver_signal(int sig, siginfo_t *code);
		240	void kern_deliver_async_signal(int sig);
		241	void kern_deliver_process_signal(int sig);
		242
		243	int task_sigmask(int how, const sigset_t set, sigset_t oset)
		244	{
		245	proc_des task; / current executing task... */
		246	int err = 0;
318	giacomo	247	SYS_FLAGS f;
2	pj	248
318	giacomo	249	f = kern_fsave();
2	pj	250
		251	task = &proc_table[exec_shadow];
		252
		253	if (oset)
		254	*oset = task->sigmask;
		255
		256	if (set) {
		257	switch (how) {
		258	case SIG_BLOCK:
		259	task->sigmask \|= *set;
		260	break;
		261	case SIG_UNBLOCK:
		262	task->sigmask &= ~*set;
		263	break;
		264	case SIG_SETMASK:
		265	task->sigmask = *set;
		266	break;
		267	default:
		268	err = EINVAL;
		269	}
		270	}
		271
		272	/*
		273	* Look for process pending signals that are unblocked, and deliver.
		274	*/
		275	while (procsigpending & ~task->sigmask) {
		276	int sig = ffs(procsigpending & ~task->sigmask);
		277	kern_deliver_process_signal(sig);
		278	}
		279
		280	/*
		281	* Look for task pending signals that are unblocked, and deliver.
		282	*/
		283	while (task->sigpending & ~task->sigmask) {
		284	int sig = ffs(task->sigpending & ~task->sigmask);
		285	kern_deliver_async_signal(sig);
		286	}
		287
318	giacomo	288	kern_frestore(f);
2	pj	289	return err;
		290	}
		291
		292	/*
		293	* This can be called out of an interrupt handler, say from an alarm
		294	* expiration.
		295	*/
		296	int
		297	task_signal(PID p, int signo)
		298	{
		299	// int enabled;
318	giacomo	300	SYS_FLAGS f;
		301
2	pj	302	/* Error check? Sure! */
		303	if (!signo)
		304	return 0;
		305
		306	if (signo < 0 \|\| signo >= SIG_MAX)
		307	return EINVAL;
		308
		309	if (proc_table[p].status == FREE)
		310	return EINVAL;
		311
318	giacomo	312	f = kern_fsave();
2	pj	313
		314	/*
		315	* Look at the process sigactions. If the "process" is ignoring
		316	* the signal, then the signal is not placed in the pending list.
		317	*/
		318	if (!(sigactions[signo].sa_flags & SA_SIGINFO) &&
		319	sigactions[signo].sa_handler == SIG_IGN) {
318	giacomo	320	kern_frestore(f);
2	pj	321	return 0;
		322	}
		323
		324	/*
		325	* Add the signal to list of pending signals for the target task.
		326	*/
		327	sigaddset(&proc_table[p].sigpending, signo);
		328
		329	/* check for an interruptable function!!! */
		330	test_interruptable_points(p);
		331
		332	if (proc_table[p].status == WAIT_SIGSUSPEND) {
		333	LEVEL l;
		334
		335	/* Reactivate the task... */
29	pj	336	iq_extract(p, &sigwaiters);
2	pj	337
		338	l = proc_table[p].task_level;
38	pj	339	level_table[l]->public_unblock(l,p);
2	pj	340
		341	}
		342
		343
		344	/*
		345	* If not in an interrupt, use this opportunity to deliver
		346	* pending unblocked signals to the current thread.
		347	*/
		348	if (!ll_ActiveInt()) {
		349	kern_deliver_pending_signals();
		350	}
		351
318	giacomo	352	kern_frestore(f);
2	pj	353	return 0;
		354	}
		355
		356	/*
		357	* sigaction
		358	*/
		359	int
		360	sigaction(int sig, const struct sigaction act, struct sigaction oact)
		361	{
		362	int sos; /* used to empty the sigqueue... */
		363	SYS_FLAGS f;
		364
		365
		366	if (sig < 0 \|\| sig >= SIG_MAX)
		367	return errno = EINVAL, -1;
		368
		369	f = kern_fsave();
		370
		371	if (oact)
		372	*oact = sigactions[sig];
		373	if (act)
		374	sigactions[sig] = *act;
		375
		376	/*
		377	* If the action for this signal is being set to SIG_IGN or SIG_DFL,
		378	* and that signal is process pending, then clear it.
		379	*/
		380	if (act && !(act->sa_flags & SA_SIGINFO) &&
		381	(act->sa_handler == SIG_IGN \|\| act->sa_handler == SIG_DFL)) {
		382	sos = sigqueued[sig];
		383	while (sos != -1) {
		384	/* Remove the first entry and put it to the free
		385	queue */
		386	sos = sig_queue[sigqueued[sig]].next;
		387
		388	if (sig_queue[sigqueued[sig]].flags & USED_FOR_TIMER)
		389	sig_queue[sigqueued[sig]].flags &= ~SIGNAL_POSTED;
		390	else {
		391	sig_queue[sigqueued[sig]].next = sigqueue_free;
		392	sigqueue_free = sigqueued[sig];
		393	}
		394	}
		395	sigqueued[sig] = -1;
		396	sigdelset(&procsigpending, sig);
		397	}
		398
		399	kern_frestore(f);
		400	return 0;
		401	}
		402
		403	/*
		404	* sigprocmask. this is just task_sigmask
		405	*/
		406	int
		407	sigprocmask(int how, const sigset_t set, sigset_t oset)
		408	{
		409	return task_sigmask(how, set, oset);
		410	}
		411
		412	/*
		413	* raise. this is just task_signal on itself.
		414	*/
		415	int
		416	raise(int sig)
		417	{
		418	return task_signal(exec_shadow, sig);
		419	}
		420
		421	/*
		422	* kill. What does it mean to kill() in a multithreaded program? The POSIX
		423	* spec says that a signal sent to a "process" shall be delivered to only
		424	* one task. If no task has that signal unblocked, then the first
		425	* task to unblock the signal is the lucky winner. Well, that means we
		426	* need to have a global procsigpending to record process pending signals.
		427	*/
		428	int
		429	kill(pid_t pid, int signo)
		430	{
		431	PID task;
		432	PID i;
		433	SYS_FLAGS f;
		434	struct sigaction act;
		435
		436	/* Error check? Sure! */
		437	if (!signo)
		438	return 0;
		439
		440	if (signo < 0 \|\| signo >= SIG_MAX)
		441	return EINVAL;
		442
		443
		444	f = kern_fsave();
		445
		446	act = sigactions[signo];
		447
		448	if (!(act.sa_flags & SA_SIGINFO) && act.sa_handler == SIG_IGN) {
		449	kern_frestore(f);
		450	return 0;
		451	}
		452
		453	/*
		454	* Kill does not queue. If the signal is already pending, this
		455	* one is tossed.
		456	*/
		457	if (sigismember(&procsigpending, signo)) {
		458	kern_frestore(f);
		459	return 0;
		460	}
		461
		462	/*
		463	* Make the signal process pending.
		464	*/
		465	sigaddset(&procsigpending, signo);
		466
		467	/*
		468	* Look through the threads in sigwait to see if any of them
		469	* is waiting for the signal. This is done as a separate pass
		470	* since the value of the pthread sigmask is ignored (threads
		471	* in sigwait will have blocked the signals being waited for).
		472	*/
		473
29	pj	474	for (task = iq_query_first(&sigwaiters);
2	pj	475	task != NIL;
29	pj	476	task = iq_query_next(task, &sigwaiters)) {
2	pj	477	if (sigismember(&proc_table[task].sigwaiting, signo)) {
		478	LEVEL l;
		479
		480	if (proc_table[task].status == WAIT_SIGSUSPEND)
		481	sigaddset(&proc_table[task].sigpending, signo);
		482
		483	/* Reactivate the task... */
29	pj	484	iq_extract(task, &sigwaiters);
2	pj	485	l = proc_table[task].task_level;
38	pj	486	level_table[l]->public_unblock(l,task);
2	pj	487
		488	if (proc_table[task].delay_timer != -1) {
38	pj	489	kern_event_delete(proc_table[task].delay_timer);
2	pj	490	proc_table[task].delay_timer = -1;
		491	}
		492
		493	kern_frestore(f);
		494	return 0;
		495	}
		496	}
		497
		498	/*
		499	* No threads in sigwait. Too bad. Must find another thread to
		500	* deliver it to.
		501	*/
		502	for (i = 1; i < MAX_PROC; i++) {
		503	if (proc_table[i].status != FREE) {
		504	if (! sigismember(&proc_table[i].sigmask, signo)) {
		505	/* Add the signal to list of pending
		506	signals for the target task. */
		507	sigaddset(&proc_table[i].sigpending, signo);
		508
		509	/* check for an interruptable function!!! */
		510	test_interruptable_points(i);
		511	break;
		512	}
		513	}
		514	}
		515
		516	/*
		517	* If not in an interrupt, use this opportunity to deliver
		518	* pending unblocked signals to the current thread.
		519	*/
		520	if (! ll_ActiveInt()) {
		521	kern_deliver_pending_signals();
		522	}
		523
		524	kern_frestore(f);
		525	return 0;
		526	}
		527
		528	/*
		529	* sigqueue internal: accept also the SI_XXX value
		530	*/
		531	int
		532	sigqueue_internal(pid_t pid, int signo, const union sigval value, int si_code)
		533	{
		534	PID task;
		535	SYS_FLAGS f;
		536	int i;
		537
		538	int thingie; /* an element of the signal queue */
		539	int sos; /* used when inserting thinghie in
		540	the signal queue */
		541	struct sigaction act;
		542
		543	/* Error check? Sure! */
		544	if (!signo)
		545	return 0;
		546
		547	if (signo < 0 \|\| signo >= SIG_MAX)
		548	return EINVAL;
		549
		550
		551	f = kern_fsave();
		552	/*
		553	* Look at the process sigactions. If the "process" is ignoring
		554	* the signal, then the signal is not placed in the pending list.
		555	*/
		556	act = sigactions[signo];
		557
		558	if (!(act.sa_flags & SA_SIGINFO) && act.sa_handler == SIG_IGN) {
		559	kern_frestore(f);
		560	return 0;
		561	}
		562
		563
		564	/*
		565	* If the flags does not include SA_SIGINFO, and there is already
		566	* a signal pending, this new one is dropped.
		567	*/
		568	if ((! (act.sa_flags & SA_SIGINFO)) &&
		569	sigismember(&procsigpending, signo)) {
		570	kern_frestore(f);
		571	return 0;
		572	}
		573
		574	/*
		575	* Gotta have space for the new signal.
		576	*/
		577	if (sigqueue_free == -1) {
		578	kern_frestore(f);
		579	return EAGAIN;
		580	}
		581
		582	/*
		583	* Create a queue entry.
		584	*/
		585	thingie = sigqueue_free;
		586	sigqueue_free = sig_queue[sigqueue_free].next;
		587
		588	sig_queue[thingie].info.si_signo = signo;
		589	sig_queue[thingie].info.si_code = si_code;
		590	sig_queue[thingie].info.si_value = value;
		591	sig_queue[thingie].info.si_task = exec_shadow;
		592	sig_queue[thingie].next = -1;
		593
		594	/*
		595	* Queue the signal on the process.
		596	*/
		597
		598	/* we insert the signal at the queue's tail */
		599	if (sigqueued[signo] == -1)
		600	sigqueued[signo] = thingie;
		601	else {
		602	sos = sigqueued[signo];
		603	while (sig_queue[sos].next != -1) sos = sig_queue[sos].next;
		604	sig_queue[sos].next = thingie;
		605	}
		606	sigaddset(&procsigpending, signo);
		607
		608	/*
		609	* Look through the threads in sigwait to see if any of them
		610	* is waiting for the signal. This is done as a separate pass
		611	* since the value of the pthread sigmask is ignored (threads
		612	* in sigwait will have blocked the signals being waited for).
		613	* If we find one, wakeup that thread. Note that POSIX says that
		614	* if multiple threads are sigwaiting for the same signal number,
		615	* exactly one thread is woken up. The problem is how to maintain
		616	* the FIFO order, and how to prevent lost signals in the case that
		617	* a thread calls sigwait before the woken thread runs and gets it.
		618	*/
29	pj	619	for (task = iq_query_first(&sigwaiters);
2	pj	620	task != NIL;
29	pj	621	task = iq_query_next(task, &sigwaiters)) {
2	pj	622	if (sigismember(&proc_table[task].sigwaiting, signo)) {
		623	LEVEL l;
		624
		625	if (proc_table[task].status == WAIT_SIGSUSPEND)
		626	sigaddset(&proc_table[task].sigpending, signo);
		627
		628	/* Reactivate the task... */
29	pj	629	iq_extract(task, &sigwaiters);
2	pj	630
		631	l = proc_table[task].task_level;
38	pj	632	level_table[l]->public_unblock(l,task);
2	pj	633
		634	if (proc_table[task].delay_timer != -1) {
38	pj	635	kern_event_delete(proc_table[task].delay_timer);
2	pj	636	proc_table[task].delay_timer = -1;
		637	}
		638
		639	kern_frestore(f);
		640	return 0;
		641
		642	}
		643	}
		644
		645	/*
		646	* Need to find a thread to deliver the signal to. Look for the
		647	* first thread that is not blocking the signal, and send it the
		648	* signal. It is my opinion that any program that is using sigwait,
		649	* and has not blocked signals in all of its threads, is bogus. The
		650	* same is true if the program is not using sigwait, and has the
		651	* signal unblocked in more than one thread.
		652	* Why? You might wake up a thread, but not have an actual queue
		653	* entry left by the time it runs again and looks, since another
		654	* thread could call sigwait and get that queue entry, or if there
		655	* are multiple threads that can take the signal, one thread could
		656	* get all the entries. This could result in an interrupted thread,
		657	* but with no signal to deliver. Well, not much to do about it.
		658	* Lets just queue the signal for the process, and let the chips
		659	* fall where they may.
		660	*/
		661	for (i = 1; i < MAX_PROC; i++) {
		662	if (proc_table[i].status != FREE) {
		663	if (! sigismember(&proc_table[i].sigmask, signo)) {
		664	/* Add the signal to list of pending
		665	signals for the target task. */
		666	sigaddset(&proc_table[i].sigpending, signo);
		667
		668	/* check for an interruptable function!!! */
		669	test_interruptable_points(i);
		670
		671	break;
		672	}
		673	}
		674	}
		675
		676	/*
		677	* If not in an interrupt, use this opportunity to deliver
		678	* pending unblocked signals to the current thread.
		679	* (NB: a discussion on the flag active_exc is near the function
		680	* kern_raise() )
		681	*/
		682	if (! ll_ActiveInt() && active_exc == 0) {
		683	kern_deliver_pending_signals();
		684	}
		685
		686	kern_frestore(f);
		687	return 0;
		688	}
		689
		690	static void sigwait_timer(void *arg)
		691	{
		692	PID p = (PID)arg;
		693	LEVEL l;
		694
		695	/* reset the event timer */
		696	proc_table[p].delay_timer = -1;
		697
		698	/* set the timeout flag */
		699	proc_table[p].control \|= SIGTIMEOUT_EXPIRED;
		700
		701	/* insert the task into the ready queue and extract it from the waiters */
29	pj	702	iq_extract(p, &sigwaiters);
2	pj	703
		704	l = proc_table[p].task_level;
38	pj	705	level_table[l]->public_unblock(l,p);
2	pj	706
		707	event_need_reschedule();
		708	}
		709
		710	/*
		711	* Sigwait. Sigwait overrides the state of the pthread sigmask and the global
		712	* sigactions. The caller must block the set of signals in "set", before
		713	* calling sigwait, otherwise the behaviour is undefined (which means that
		714	* the caller will take an async signal anyway, and sigwait will return EINTR.
		715	*/
		716	int
		717	kern_sigwait_internal(const sigset_t *set,
		718	siginfo_t info, const struct timespec timeout)
		719	{
		720	proc_des *pthread = &proc_table[exec_shadow];
		721	int thissig;
		722
		723	LEVEL l;
318	giacomo	724	SYS_FLAGS f;
2	pj	725
		726	task_testcancel();
		727
		728	/* siglock and pthread siglock are taken from an interrupt handler */
318	giacomo	729	f = kern_fsave();
2	pj	730
		731	/*
		732	* First check for process pending signals. Must take and hold
		733	* the global siglock to prevent races with kill() and sigqueue().
		734	*/
		735	if (procsigpending & *set) {
		736	int sos;
		737
		738	thissig = ffs(procsigpending & *set);
		739
		740	/*
		741	* Sent with kill(). Using sigwait and kill is Bogus!
		742	*/
		743	if (sigqueued[thissig] == -1) {
		744	info->si_signo = thissig;
		745	info->si_code = SI_USER;
		746	info->si_value.sival_int = 0;
		747
		748	sigdelset(&pthread->sigpending, thissig);
		749	sigdelset(&procsigpending, thissig);
318	giacomo	750	kern_frestore(f);
2	pj	751	return 0;
		752	}
		753
		754	/*
		755	* Grab the first queue entry.
		756	*/
		757	sos = sigqueued[thissig];
29	pj	758	sigqueued[thissig] = sig_queue[sos].next;
2	pj	759
		760	/*
		761	* If that was the last one, reset the process procsigpending.
		762	*/
		763	if (sigqueued[thissig] == -1)
		764	sigdelset(&procsigpending, thissig);
		765	sigdelset(&pthread->sigpending, thissig);
		766
		767	/*
		768	* Copy the information and free the queue entry.
		769	*/
		770	info->si_signo = sig_queue[sos].info.si_signo;
		771	info->si_code = sig_queue[sos].info.si_code;
		772	info->si_value.sival_int = sig_queue[sos].info.si_value.sival_int;
		773
		774	if (sig_queue[sos].flags & USED_FOR_TIMER)
		775	sig_queue[sos].flags &= ~SIGNAL_POSTED;
		776	else {
		777	sig_queue[sos].next = sigqueue_free;
		778	sigqueue_free = sos;
		779	}
318	giacomo	780	kern_frestore(f);
2	pj	781	return 0;
		782	}
		783
		784	/*
		785	* Now check for pthread pending signals.
		786	*/
		787	if (pthread->sigpending & *set) {
		788	thissig = ffs(pthread->sigpending & *set);
		789	info->si_signo = thissig;
		790	info->si_code = SI_USER;
		791	info->si_value.sival_int = 0;
		792	sigdelset(&pthread->sigpending, thissig);
318	giacomo	793	kern_frestore(f);
2	pj	794	return 0;
		795	}
		796
		797	/*
		798	* For timed wait, if nothing is available and the timeout value
		799	* is zero, its an error.
		800	*/
		801	if (timeout && timeout->tv_sec == 0 && timeout->tv_nsec == 0) {
318	giacomo	802	kern_frestore(f);
2	pj	803	return EAGAIN;
		804	}
		805
		806	/*
		807	* Grab the wait lock and set the sigwaiting mask. Once that is done,
		808	* release the thread siglock; Another thread can try and wake this
		809	* thread up as a result of seeing it in sigwait, but the actual
		810	* wakeup will be delayed until the waitlock is released in the switch
		811	* code.
		812	*/
		813	pthread->sigwaiting = *set;
		814
		815	/* now, we really block the task... */
		816	proc_table[exec_shadow].context = kern_context_save();
		817
38	pj	818	kern_epilogue_macro();
		819
2	pj	820	l = proc_table[exec_shadow].task_level;
38	pj	821	level_table[l]->public_block(l,exec_shadow);
2	pj	822
		823	/*
		824	* Add this thread to the list of threads in sigwait. Once that is
		825	* done, it is safe to release the global siglock, which will allow
		826	* another thread to scan the sigwaiters list. As above, it might
		827	* find a thread in sigwait, but it will not be able to wake it up
		828	* until the waitlock is released in the switch code.
		829	*/
29	pj	830	iq_insertfirst(exec_shadow, &sigwaiters);
2	pj	831	proc_table[exec_shadow].status = WAIT_SIG;
		832
		833	if (timeout) {
		834	/* we can use the delaytimer because if we are here we are not in a
		835	task_delay */
		836	struct timespec t, abstime;
38	pj	837	kern_gettime(&t);
2	pj	838	ADDTIMESPEC(&t, timeout, &abstime);
		839
		840	proc_table[exec_shadow].delay_timer =
		841	kern_event_post(&abstime,sigwait_timer,(void *)exec_shadow);
		842	}
		843
		844	/* and finally we reschedule */
		845	exec = exec_shadow = -1;
		846	scheduler();
		847	ll_context_to(proc_table[exec_shadow].context);
		848
		849	task_testcancel();
		850
		851	pthread->sigwaiting = 0;
		852
		853	/*
		854	* Look for timeout.
		855	*/
		856	if (proc_table[exec_shadow].control & SIGTIMEOUT_EXPIRED) {
318	giacomo	857	kern_frestore(f);
2	pj	858	return EAGAIN;
		859	}
		860
		861	/*
		862	* Look for a wakeup to deliver a queued signal. This would come
		863	* either from kill() or from sigqueue().
		864	*/
		865	if (procsigpending & *set) {
		866	int sos;
		867
		868	thissig = ffs(procsigpending & *set);
		869
		870	/*
		871	* Sent with kill(). Using sigwait and kill is Bogus!
		872	*/
		873	if (sigqueued[thissig] == -1) {
		874	info->si_signo = thissig;
		875	info->si_code = SI_USER;
		876	info->si_value.sival_int = 0;
		877
		878	sigdelset(&procsigpending, thissig);
318	giacomo	879	kern_frestore(f);
2	pj	880	return 0;
		881	}
		882
		883	/*
		884	* Grab the first queue entry.
		885	*/
29	pj	886	sos = sigqueued[thissig];
		887	sigqueued[thissig] = sig_queue[sos].next;
2	pj	888
		889	/*
		890	* If that was the last one, reset the process procsigpending.
		891	*/
		892	if (sigqueued[thissig] == -1)
		893	sigdelset(&procsigpending, thissig);
		894
		895	/*
		896	* Copy the information and free the queue entry.
		897	*/
		898	info->si_signo = sig_queue[sos].info.si_signo;
		899	info->si_code = sig_queue[sos].info.si_code;
		900	info->si_value.sival_int = sig_queue[sos].info.si_value.sival_int;
		901
		902	if (sig_queue[sos].flags & USED_FOR_TIMER)
		903	sig_queue[sos].flags &= ~SIGNAL_POSTED;
		904	else {
		905	sig_queue[sos].next = sigqueue_free;
		906	sigqueue_free = sos;
		907	}
		908
318	giacomo	909	kern_frestore(f);
2	pj	910	return 0;
		911	}
		912
		913	/*
		914	* Well, at the moment I am going to assume that if this thread
		915	* wakes up, and there is no signal pending in the waitset, the
		916	* thread wait was interrupted for some other reason. Return EINTR.
		917	*/
		918	if (! (pthread->sigpending & *set)) {
318	giacomo	919	kern_frestore(f);
2	pj	920	return EINTR;
		921	}
		922
		923	/*
		924	* Otherwise, get the first signal and return it.
		925	*/
		926	thissig = ffs(pthread->sigpending & *set);
		927	info->si_signo = thissig;
		928	info->si_code = SI_USER;
		929	info->si_value.sival_int = 0;
		930	sigdelset(&pthread->sigpending, thissig);
318	giacomo	931	kern_frestore(f);
2	pj	932	return 0;
		933	}
		934
		935	/*
		936	* Sigwait.
		937	*/
		938	int
		939	sigwait(const sigset_t set, int sig)
		940	{
		941	siginfo_t info;
		942	int rc;
		943
		944	memset(&info, 0, sizeof(info));
		945
		946	rc = kern_sigwait_internal(set, &info, 0);
		947
		948	if (rc)
		949	return rc;
		950
		951	*sig = info.si_signo;
		952	return 0;
		953	}
		954
		955	/*
		956	* Sigwaitinfo.
		957	*/
		958	int
		959	sigwaitinfo(const sigset_t set, siginfo_t info)
		960	{
		961	return kern_sigwait_internal(set, info, 0);
		962	}
		963
		964	/*
		965	* Sigtimedwait.
		966	*/
		967	int
		968	sigtimedwait(const sigset_t *set,
		969	siginfo_t info, const struct timespec timeout)
		970	{
		971	if (! timeout)
		972	return EINVAL;
		973
		974	return kern_sigwait_internal(set, info, timeout);
		975	}
		976
		977	/*
		978	* Signal
		979	*/
		980	void (signal(int signum, void (handler)(int)))(int)
		981	{
		982	struct sigaction act, oact;
		983	int olderrno;
		984	void (*retvalue)(int);
		985
		986	act.sa_handler = handler;
		987	sigemptyset(&act.sa_mask);
		988	act.sa_flags = 0;
		989
		990	olderrno = errno;
		991	if (sigaction(signum, &act, &oact))
		992	retvalue = SIG_ERR;
		993	else
		994	if (oact.sa_flags & SA_SIGINFO)
		995	retvalue = SIG_ERR;
		996	else
		997	retvalue = oact.sa_handler;
		998
		999	errno = olderrno;
		1000
		1001	return retvalue;
		1002
		1003	}
		1004
		1005
		1006	/*
		1007	* sigpending
		1008	*/
		1009	int sigpending(sigset_t *set)
		1010	{
		1011	*set = procsigpending \| proc_table[exec_shadow].sigpending;
		1012	return 0;
		1013	}
		1014
		1015
		1016	/*
		1017	* sigsuspend
		1018	*/
		1019	int sigsuspend(const sigset_t *set)
		1020	{
		1021	proc_des *pthread = &proc_table[exec_shadow];
318	giacomo	1022	SYS_FLAGS f;
2	pj	1023	LEVEL l;
		1024
		1025	task_testcancel();
		1026
318	giacomo	1027	f = kern_fsave();
2	pj	1028
		1029	/*
		1030	* Now check for pthread pending signals.
		1031	*/
		1032	if (pthread->sigpending & *set) {
		1033	kern_deliver_pending_signals();
318	giacomo	1034	kern_frestore(f);
2	pj	1035	return 0;
		1036	}
		1037
		1038	/*
		1039	* Grab the wait lock and set the sigwaiting mask. Once that is done,
		1040	* release the thread siglock; Another thread can try and wake this
		1041	* thread up as a result of seeing it in sigwait, but the actual
		1042	* wakeup will be delayed until the waitlock is released in the switch
		1043	* code.
		1044	*/
		1045	pthread->sigwaiting = *set;
		1046
		1047	/* now, we really block the task... */
		1048	proc_table[exec_shadow].context = kern_context_save();
		1049
38	pj	1050	kern_epilogue_macro();
2	pj	1051	l = proc_table[exec_shadow].task_level;
38	pj	1052	level_table[l]->public_block(l,exec_shadow);
2	pj	1053
29	pj	1054	iq_insertfirst(exec_shadow, &sigwaiters);
2	pj	1055	proc_table[exec_shadow].status = WAIT_SIGSUSPEND;
		1056
		1057	/* and finally we reschedule */
		1058	exec = exec_shadow = -1;
		1059	scheduler();
		1060	ll_context_to(proc_table[exec_shadow].context);
		1061
		1062	task_testcancel();
		1063
		1064	/*
		1065	* Well, at the moment I am going to assume that if this thread
		1066	* wakes up, and there is no signal pending in the waitset, the
		1067	* thread wait was interrupted for some other reason. Return EINTR.
		1068	*/
		1069	if (! (pthread->sigpending & *set)) {
318	giacomo	1070	kern_frestore(f);
2	pj	1071	return EINTR;
		1072	}
		1073
		1074	/*
		1075	* Otherwise, deliver the signals.
		1076	*/
		1077	kern_deliver_pending_signals();
318	giacomo	1078	kern_frestore(f);
2	pj	1079	return 0;
		1080	}
		1081
		1082
		1083	void timer_alarmfire(void *arg)
		1084	{
		1085	alarm_timer = -1;
		1086
		1087	kill(0, SIGALRM);
		1088
		1089	event_need_reschedule();
		1090	}
		1091
		1092	/*
		1093	* alarm
		1094	*/
		1095	unsigned int alarm(unsigned int seconds)
		1096	{
		1097	struct timespec returnvalue, temp;
318	giacomo	1098	SYS_FLAGS f;
2	pj	1099
318	giacomo	1100	f = kern_fsave();
2	pj	1101
38	pj	1102	kern_gettime(&temp);
2	pj	1103
		1104	if (alarm_timer == -1)
		1105	returnvalue.tv_sec = 0;
		1106	else {
		1107	SUBTIMESPEC(&alarm_time, &temp, &returnvalue);
		1108
38	pj	1109	kern_event_delete(alarm_timer);
2	pj	1110	}
		1111
		1112	if (seconds) {
		1113	temp.tv_sec += seconds;
		1114	TIMESPEC_ASSIGN(&alarm_time, &temp);
		1115	alarm_timer = kern_event_post(&temp, timer_alarmfire, NULL);
		1116	}
		1117	else
		1118	alarm_timer = -1;
		1119
318	giacomo	1120	kern_frestore(f);
2	pj	1121
		1122	return returnvalue.tv_sec;
		1123	}
		1124
		1125	int pause(void)
		1126	{
		1127	sigset_t set;
		1128
		1129	sigfillset(&set);
		1130	return sigsuspend(&set);
		1131	}
		1132
		1133	/*
		1134	* Internal stuff.
		1135	*/
		1136
		1137	/*
		1138	* Deliver an asynchronous signal. This must be called with interrupts
		1139	* blocked and the pthread siglock held.
		1140	*/
		1141	void
		1142	kern_deliver_async_signal(int sig)
		1143	{
		1144	siginfo_t siginfo;
		1145
		1146	siginfo.si_signo = sig;
		1147	siginfo.si_code = SI_USER;
		1148	siginfo.si_value.sival_int = 0;
		1149	siginfo.si_task = exec_shadow;
		1150
		1151	really_deliver_signal(sig, &siginfo);
		1152	}
		1153
		1154	/*
		1155	* Deliver a process signals. This must be called with interrupts
		1156	* blocked and the siglock and pthread siglock held.
		1157	*/
		1158	void
		1159	kern_deliver_process_signal(int sig)
		1160	{
		1161	siginfo_t siginfo;
		1162	int thingie;
		1163
		1164	/*
		1165	* Sent with kill(). Using sigwait and kill is Bogus!
		1166	*/
		1167	if (sigqueued[sig] == -1) {
		1168	siginfo.si_signo = sig;
		1169	siginfo.si_code = SI_USER;
		1170	siginfo.si_value.sival_int = 0;
		1171	siginfo.si_task = exec_shadow;
		1172
		1173	sigdelset(&procsigpending, sig);
		1174	goto deliver;
		1175	}
		1176
		1177	/*
		1178	* Grab the first queue entry.
		1179	*/
		1180	thingie = sigqueued[sig];
		1181	sigqueued[sig] = sig_queue[sigqueued[sig]].next;
		1182
		1183	/*
		1184	* If that was the last one, reset the process sigpending.
		1185	*/
		1186	if (sigqueued[sig] == -1)
		1187	sigdelset(&procsigpending, sig);
		1188
		1189	/*
		1190	* Copy the information and free the queue entry.
		1191	*/
		1192	siginfo.si_signo = sig_queue[thingie].info.si_signo;
		1193	siginfo.si_code = sig_queue[thingie].info.si_code;
		1194	siginfo.si_value.sival_int = sig_queue[thingie].info.si_value.sival_int;
		1195	siginfo.si_task = sig_queue[thingie].info.si_task;
		1196
		1197	if (sig_queue[thingie].flags & USED_FOR_TIMER)
		1198	sig_queue[thingie].flags &= ~SIGNAL_POSTED;
		1199	else {
		1200	sig_queue[thingie].next = sigqueue_free;
		1201	sigqueue_free = thingie;
		1202	}
		1203
		1204	deliver:
		1205	really_deliver_signal(sig, &siginfo);
		1206
		1207	}
		1208
		1209	/*
		1210	* Deliver any pending signals. Called out of the context switch code
		1211	* when a task switches in, and there are pending signals.
		1212	*
		1213	* Interrupts are blocked...
		1214	*/
		1215	void
		1216	kern_deliver_pending_signals(void)
		1217	{
		1218	proc_des task; / current executing task... */
		1219
		1220	task = &proc_table[exec_shadow];
		1221
		1222	/* we have to check if the task was descheduled while serving
		1223	signals... if so, it is useless the call to this function...
		1224	because the task is already in it!!! (NB: the task can be
		1225	descheduled because the signal handlers are executed with
		1226	interrupts enabled...) */
		1227	if (task->control & TASK_DOING_SIGNALS)
		1228	return;
		1229
		1230	task->control \|= TASK_DOING_SIGNALS;
		1231
		1232	/*
		1233	* Look for process pending signals that are unblocked, and deliver.
		1234	*/
		1235	while (procsigpending & ~task->sigmask) {
		1236	/* NB: the while test should be indipendent from any local
		1237	variable... because when we process signals there can be
		1238	some context_change before we return from the
		1239	kern_deliver-signals...
		1240	*/
		1241	int sig = ffs(procsigpending & ~task->sigmask);
		1242
		1243	/* Call with siglock and thread siglock locked */
		1244	kern_deliver_process_signal(sig);
		1245	}
		1246
		1247	/*
		1248	* Now deliver any pthread pending signals that are left.
		1249	* NB: the pthread pending signals are NOT sent via sigqueue!!!
		1250	*/
		1251	while (task->sigpending & ~task->sigmask) {
		1252	int sig = ffs(task->sigpending & ~task->sigmask);
		1253
		1254	/* Call at splhigh and thread locked */
		1255	kern_deliver_async_signal(sig);
		1256	}
		1257	task->control &= ~TASK_DOING_SIGNALS;
		1258	}
		1259
		1260	/*
		1261	* Actually deliver the signal to the task. At this point the signal
		1262	* is going to be delivered, so it no longer matters if it is blocked.
		1263	*/
		1264	void
		1265	really_deliver_signal(int sig, siginfo_t *info)
		1266	{
		1267	proc_des task; / current executing task... */
		1268
		1269	sigset_t sigmask, oldmask;
		1270	struct sigaction act;
		1271	SYS_FLAGS f;
		1272
		1273	f = kern_fsave();
		1274
		1275	task = &proc_table[exec_shadow];
		1276
		1277	act = sigactions[sig];
		1278
		1279	//kern_printf("Ci sono!!!flags=%d hand=%d sigaction=%d mask=%d",act.sa_flags,
		1280	// (int)act.sa_handler, (int)act.sa_sigaction, (int)act.sa_mask);
		1281
		1282	/*
		1283	* Ignored?
		1284	*/
		1285	if (!(act.sa_flags & SA_SIGINFO) && (act.sa_handler == SIG_IGN \|\|
228	giacomo	1286	act.sa_handler == SIG_ERR) ) {
753	giacomo	1287	sigdelset(&task->sigpending, sig);
228	giacomo	1288	kern_frestore(f);
2	pj	1289	return;
228	giacomo	1290	}
2	pj	1291
		1292	if (!(act.sa_flags & SA_SIGINFO) && act.sa_handler == SIG_DFL) {
		1293	/* Default action for all signals is termination */
1005	mauro	1294	//kern_printf("\nSignal number %d...\n",sig);
2	pj	1295	if (act.sa_flags & SA_SIGINFO)
1005	mauro	1296	//kern_printf("with value : %d\n",info->si_value.sival_int);
920	pj	1297	exit(ASIG_DEFAULT_ACTION);
2	pj	1298	}
		1299
		1300	/*
		1301	* Set the signal mask for calling the handler.
		1302	*/
		1303	oldmask = sigmask = task->sigmask;
		1304	sigaddset(&sigmask, sig);
		1305	sigmask \|= act.sa_mask;
		1306	sigdelset(&task->sigpending, sig);
		1307	task->sigmask = sigmask;
		1308
320	giacomo	1309	kern_sti();
2	pj	1310	/*
		1311	* and call the handler ...
		1312	*/
		1313	if (act.sa_flags & SA_SIGINFO)
		1314	act.sa_sigaction(sig, info, NULL);
		1315	else
		1316	((void ()(int, int, void ))act.sa_handler)
		1317	(sig, info->si_value.sival_int, NULL);
		1318
		1319	/* NB: when we pass the kern_cli(), there can be the case that
		1320	an irq (and/or a timer...) fired... and do a context change.
		1321	so, we return here after an indefinite time... */
320	giacomo	1322	kern_cli();
		1323	task->sigmask = oldmask;
2	pj	1324
		1325	kern_frestore(f);
		1326	}
		1327
		1328
		1329	/---------------------------------------------------------------------/
		1330	/* S.HA.R.K. exceptions handling */
		1331	/---------------------------------------------------------------------/
		1332
		1333	void kern_raise(int n, PID p)
		1334	{
		1335	union sigval v;
318	giacomo	1336	SYS_FLAGS f;
2	pj	1337	PID sos; /* temp. PID */
		1338
		1339	v.sival_int = n;
1005	mauro	1340	//kern_printf("RAISE");
2	pj	1341
		1342	/* sigqueue set the p field to exec_shadow... so whe change it for a
		1343	little... because sigqueue fill descriptor with exec_shadow... */
318	giacomo	1344	f = kern_fsave();
2	pj	1345	sos = exec_shadow;
		1346	exec_shadow = p;
		1347
		1348	active_exc = 1; // see (*)
		1349	sigqueue(0, SIGHEXC, v);
		1350	active_exc = 0;
		1351
		1352	exec_shadow = sos;
318	giacomo	1353	kern_frestore(f);
2	pj	1354
		1355	/* (*)
		1356	when we are in an exception, we don't have to call the
		1357	really_deliver signal.
920	pj	1358	For example, when the capacity of a task is exausted, an OSLib event is
		1359	called. this event simply call scheduler, that call the public_epilogue.
2	pj	1360
920	pj	1361	the public_epilogue checks the capacity and raise an exception, BUT
2	pj	1362	we don't have to deliver this exception immediately.
		1363
		1364	Why? because the task pointed by exec_shadow was extracted from the
		1365	ready queue (as sigqueue do normally...) and the exception does not have
		1366	to be delivered to that task. It must be delivered
		1367	only after we exit from the kern_raise (because the signal handler
		1368	in SIGHEXC may be long and another timer interrupt can fire...), to
		1369	another task...
		1370	*/
		1371
		1372	}
		1373
		1374
		1375	/---------------------------------------------------------------------/
		1376	/* S.Ha.R.K. interrupts handling */
		1377	/---------------------------------------------------------------------/
		1378
		1379	/----------------------------------------------------------------------/
		1380	/* Interrupt table management. The following function install the fast */
		1381	/* handler and the sporadic task linked to the interrupt no. */
		1382	/* If the fast parameter is NULL, no handler is called. */
		1383	/* If the pi parameter is NIL no task is installed */
		1384	/----------------------------------------------------------------------/
		1385
		1386	/* Interrupt handling table */
		1387	static struct int_des {
496	giacomo	1388	void (*fast)(int n);
1005	mauro	1389	void (*intdrv)(int n);
496	giacomo	1390	PID proc_index;
		1391	BYTE isUsed;
		1392	BYTE irqLock;
2	pj	1393	} int_table[16];
		1394
		1395	/* Warning the interrupt can cause a preemption! */
		1396	/* The fast handler is a standard piece of code which runs with */
		1397	/* interrupts enabled to allow interrupt nesting */
		1398
1018	mauro	1399	extern int add_interrupt_job(int no);
1077	fabio	1400	extern int invalidate_pending_jobs(int no);
1018	mauro	1401
2	pj	1402	void irq_fasthandler(void *n)
		1403	{
496	giacomo	1404	int no = (int )n;
		1405	PID p;
2	pj	1406
1020	mauro	1407	//kern_printf("(irq_fasthandler: no %d)",no);
496	giacomo	1408	/* tracer stuff */
502	giacomo	1409	TRACER_LOGEVENT(FTrace_EVT_interrupt_start,(unsigned short int)no,0);
2	pj	1410
496	giacomo	1411	if (int_table[no].fast != NULL) {
		1412	if (int_table[no].irqLock == FALSE)
		1413	kern_sti();
		1414	(int_table[no].fast)(no);
		1415	if (int_table[no].irqLock == FALSE)
		1416	kern_cli();
		1417	}
2	pj	1418
1005	mauro	1419	if (int_table[no].intdrv != NULL) {
1018	mauro	1420	add_interrupt_job(no);
1005	mauro	1421	}
		1422
502	giacomo	1423	TRACER_LOGEVENT(FTrace_EVT_interrupt_end,(unsigned short int)no,0);
353	giacomo	1424
496	giacomo	1425	/* If a sporadic process is linked,activate it */
		1426	p = int_table[no].proc_index;
		1427	task_activate(p); // no problem if p == nil
2	pj	1428	}
		1429
		1430	/----------------------------------------------------------------------/
		1431	/* Interrupt table management. The following function install the fast */
		1432	/* handler and the sporadic task linked to the interrupt no. */
		1433	/* If the fast parameter is NULL, no handler is called. */
		1434	/* If the pi parameter is NIL no task is installed */
		1435	/----------------------------------------------------------------------/
1005	mauro	1436	int handler_set(int no, void (fast)(int n), BYTE lock, PID pi, void (intdrv)(int n))
2	pj	1437	{
496	giacomo	1438	SYS_FLAGS f;
1018	mauro	1439
496	giacomo	1440	if ((no < 1) \|\| (no > 15)) {
1018	mauro	1441	errno = EWRONG_INT_NO;
		1442	return -1;
496	giacomo	1443	}
2	pj	1444
496	giacomo	1445	f = kern_fsave();
1020	mauro	1446
		1447	//kern_printf("(handler_set: no %d pid %d)",no, pi);
		1448
496	giacomo	1449	if (int_table[no].isUsed == TRUE) {
1018	mauro	1450	kern_frestore(f);
		1451	errno = EUSED_INT_NO;
		1452	return -1;
496	giacomo	1453	}
		1454	int_table[no].fast = fast;
1005	mauro	1455	int_table[no].intdrv = intdrv;
496	giacomo	1456	int_table[no].proc_index = pi;
		1457	int_table[no].isUsed = TRUE;
		1458	int_table[no].irqLock = lock;
2	pj	1459
496	giacomo	1460	irq_bind(no, irq_fasthandler, INT_FORCE);
		1461	irq_unmask(no);
		1462	kern_frestore(f);
2	pj	1463
496	giacomo	1464	return 1;
2	pj	1465	}
		1466
		1467	int handler_remove(int no)
		1468	{
496	giacomo	1469	SYS_FLAGS f;
2	pj	1470
496	giacomo	1471	if (no < 1 \|\| no > 15) {
1018	mauro	1472	errno = EWRONG_INT_NO;
		1473	return -1;
496	giacomo	1474	}
2	pj	1475
496	giacomo	1476	f = kern_fsave();
1020	mauro	1477
		1478	//kern_printf("(handler_remove: no %d )",no);
		1479
496	giacomo	1480	if (int_table[no].isUsed == FALSE) {
1018	mauro	1481	kern_frestore(f);
		1482	errno = EUNUSED_INT_NO;
		1483	return -1;
496	giacomo	1484	}
2	pj	1485
1077	fabio	1486	if (int_table[no].intdrv != NULL)
		1487	invalidate_pending_jobs(no);
		1488
496	giacomo	1489	int_table[no].fast = NULL;
1005	mauro	1490	int_table[no].intdrv = NULL;
496	giacomo	1491	int_table[no].proc_index = NIL;
		1492	int_table[no].isUsed = FALSE;
		1493	int_table[no].irqLock = FALSE;
2	pj	1494
496	giacomo	1495	irq_bind(no,NULL, INT_PREEMPTABLE);
		1496	irq_mask(no);
		1497	kern_frestore(f);
2	pj	1498
496	giacomo	1499	return 1;
2	pj	1500	}
		1501
1005	mauro	1502	void *handler_get_intdrive(int no)
		1503	{
		1504	return int_table[no].intdrv;
		1505	}
		1506
2	pj	1507	/* this is the test that is done when a task is being killed
		1508	and it is waiting on a sigwait */
		1509	static int signal_cancellation_point(PID i, void *arg)
		1510	{
496	giacomo	1511	LEVEL l;
2	pj	1512
496	giacomo	1513	if (proc_table[i].status == WAIT_SIG) {
2	pj	1514
496	giacomo	1515	if (proc_table[i].delay_timer != -1) {
		1516	kern_event_delete(proc_table[i].delay_timer);
		1517	proc_table[i].delay_timer = -1;
		1518	}
2	pj	1519
496	giacomo	1520	iq_extract(i, &sigwaiters);
2	pj	1521
496	giacomo	1522	l = proc_table[i].task_level;
		1523	level_table[l]->public_unblock(l,i);
2	pj	1524
496	giacomo	1525	return 1;
		1526	} else if (proc_table[i].status == WAIT_SIGSUSPEND) {
		1527	l = proc_table[i].task_level;
		1528	level_table[l]->public_unblock(l,i);
2	pj	1529
496	giacomo	1530	return 1;
		1531	}
2	pj	1532
496	giacomo	1533	return 0;
2	pj	1534	}
		1535
		1536	void signals_init()
		1537	{
		1538	int i;
		1539
496	giacomo	1540	/* Initialize the default signal actions and the signal queue headers. */
2	pj	1541	for (i = 0; i < SIG_MAX; i++) {
496	giacomo	1542	sigactions[i].sa_handler = SIG_DFL;
		1543	sigactions[i].sa_flags = 0;
		1544	sigactions[i].sa_mask = 0;
		1545	sigactions[i].sa_sigaction = 0;
		1546	sigqueued[i] = -1;
		1547	}
2	pj	1548
496	giacomo	1549	/* Initialize the signal queue */
		1550	for (i=0; i < SIGQUEUE_MAX-1; i++) {
		1551	sig_queue[i].next = i+1;
		1552	sig_queue[i].flags = 0;
		1553	}
		1554	sig_queue[SIGQUEUE_MAX-1].next = NIL;
		1555	sig_queue[SIGQUEUE_MAX-1].flags = 0;
		1556	sigqueue_free = 0;
2	pj	1557
496	giacomo	1558	procsigpending = 0;
2	pj	1559
496	giacomo	1560	iq_init(&sigwaiters, &freedesc, 0);
		1561	alarm_timer = -1;
2	pj	1562
496	giacomo	1563	/* Interrupt handling init */
		1564	for (i=0; i<16; i++) {
		1565	int_table[i].fast = NULL;
1005	mauro	1566	int_table[i].intdrv = NULL;
496	giacomo	1567	int_table[i].proc_index = NIL;
		1568	int_table[i].isUsed = FALSE;
		1569	int_table[i].irqLock = FALSE;
		1570	}
2	pj	1571
496	giacomo	1572	register_cancellation_point(signal_cancellation_point, NULL);
2	pj	1573	}
		1574
		1575

Subversion Repositories shark

(root)/shark/trunk/kernel/signal.c - Rev 1398