WebSVN - shark - Blame - Rev 322 - /shark/trunk/oslib/xlib/exc.s

Rev	Author	Line No.	Line
2	pj	1	/* Project: OSLib
		2	* Description: The OS Construction Kit
		3	* Date: 1.6.2000
		4	* Idea by: Luca Abeni & Gerardo Lamastra
		5	*
		6	* OSLib is an SO project aimed at developing a common, easy-to-use
		7	* low-level infrastructure for developing OS kernels and Embedded
		8	* Applications; it partially derives from the HARTIK project but it
		9	* currently is independently developed.
		10	*
		11	* OSLib is distributed under GPL License, and some of its code has
		12	* been derived from the Linux kernel source; also some important
		13	* ideas come from studying the DJGPP go32 extender.
		14	*
		15	* We acknowledge the Linux Community, Free Software Foundation,
		16	* D.J. Delorie and all the other developers who believe in the
		17	* freedom of software and ideas.
		18	*
		19	* For legalese, check out the included GPL license.
		20	*/
		21
		22	/* Exc/IRQ handlers (asm part) */
		23	/* TODO: Unify the Exc/Int Mechanism... */
		24
		25	#include <ll/i386/sel.h>
		26	#include <ll/i386/linkage.h>
		27	#include <ll/i386/int.h>
		28	#include <ll/i386/defs.h>
		29
		30	.extern SYMBOL_NAME(GDT_base)
		31	.data
		32
		33	ASMFILE(Exc)
		34
		35	.globl SYMBOL_NAME(ll_irq_table)
		36
40	pj	37	SYMBOL_NAME_LABEL(ll_irq_table) .space 1024, 0
2	pj	38
		39	.text
		40
		41	.extern SYMBOL_NAME(ll_exc_hook)
		42	.extern SYMBOL_NAME(ll_FPU_hook)
		43
		44	.globl SYMBOL_NAME(h13_bis)
		45	.globl SYMBOL_NAME(exc7)
		46
		47	/* These are the hardware handlers; they all jump to ll_handler setting */
		48	/* the interrupt number into EAX & save the registers on stack */
40	pj	49	INT(0)
2	pj	50	INT(1)
		51	INT(2)
		52	INT(3)
		53	INT(4)
		54	INT(5)
		55	INT(6)
		56	INT(8)
		57	INT(9)
		58	INT(10)
		59	INT(11)
		60	INT(12)
		61	INT(13)
		62	INT(14)
		63	INT(15)
40	pj	64	INT(16)
		65	INT(17)
		66	INT(18)
		67	INT(19)
		68	INT(20)
		69	INT(21)
		70	INT(22)
		71	INT(23)
		72	INT(24)
		73	INT(25)
		74	INT(26)
		75	INT(27)
		76	INT(28)
		77	INT(29)
		78	INT(30)
		79	INT(31)
2	pj	80
40	pj	81	INT(32)
		82	INT(33)
		83	INT(34)
		84	INT(35)
		85	INT(36)
		86	INT(37)
		87	INT(38)
		88	INT(39)
		89	INT(40)
		90	INT(41)
		91	INT(42)
		92	INT(43)
		93	INT(44)
		94	INT(45)
		95	INT(46)
		96	INT(47)
		97	INT(48)
		98	INT(49)
		99	INT(50)
		100	INT(51)
		101	INT(52)
		102	INT(53)
		103	INT(54)
		104	INT(55)
		105	INT(56)
		106	INT(57)
		107	INT(58)
		108	INT(59)
		109	INT(60)
		110	INT(61)
		111	INT(62)
		112	INT(63)
2	pj	113
40	pj	114	/* Master PIC... (int 0x40, see ll/i386/pic.h)*/
		115	INT_1(64)
		116	INT_1(65)
		117	INT_1(66)
		118	INT_1(67)
		119	INT_1(68)
		120	INT_1(69)
		121	INT_1(70)
		122	INT_1(71)
		123
		124	INT(72)
		125	INT(73)
		126	INT(74)
		127	INT(75)
		128	INT(76)
		129	INT(77)
		130	INT(78)
		131	INT(79)
		132	INT(80)
		133	INT(81)
		134	INT(82)
		135	INT(83)
		136	INT(84)
		137	INT(85)
		138	INT(86)
		139	INT(87)
		140	INT(88)
		141	INT(89)
		142	INT(90)
		143	INT(91)
		144	INT(92)
		145	INT(93)
		146	INT(94)
		147	INT(95)
		148	INT(96)
		149	INT(97)
		150	INT(98)
		151	INT(99)
		152	INT(100)
		153	INT(101)
		154	INT(102)
		155	INT(103)
		156	INT(104)
		157	INT(105)
		158	INT(106)
		159	INT(107)
		160	INT(108)
		161	INT(109)
		162	INT(110)
		163	INT(111)
		164
		165	/* Slave PIC... (int 0x70, see ll/i386/pic.h)*/
		166	INT_2(112)
		167	INT_2(113)
		168	INT_2(114)
		169	INT_2(115)
		170	INT_2(116)
		171	INT_2(117)
		172	INT_2(118)
		173	INT_2(119)
		174
		175	INT(120)
		176	INT(121)
		177	INT(122)
		178	INT(123)
		179	INT(124)
		180	INT(125)
		181	INT(126)
		182	INT(127)
		183	INT(128)
		184	INT(129)
		185	INT(130)
		186	INT(131)
		187	INT(132)
		188	INT(133)
		189	INT(134)
		190	INT(135)
		191	INT(136)
		192	INT(137)
		193	INT(138)
		194	INT(139)
		195	INT(140)
		196	INT(141)
		197	INT(142)
		198	INT(143)
		199	INT(144)
		200	INT(145)
		201	INT(146)
		202	INT(147)
		203	INT(148)
		204	INT(149)
		205	INT(150)
		206	INT(151)
		207	INT(152)
		208	INT(153)
		209	INT(154)
		210	INT(155)
		211	INT(156)
		212	INT(157)
		213	INT(158)
		214	INT(159)
		215	INT(160)
		216	INT(161)
		217	INT(162)
		218	INT(163)
		219	INT(164)
		220	INT(165)
		221	INT(166)
		222	INT(167)
		223	INT(168)
		224	INT(169)
		225	INT(170)
		226	INT(171)
		227	INT(172)
		228	INT(173)
		229	INT(174)
		230	INT(175)
		231	INT(176)
		232	INT(177)
		233	INT(178)
		234	INT(179)
		235	INT(180)
		236	INT(181)
		237	INT(182)
		238	INT(183)
		239	INT(184)
		240	INT(185)
		241	INT(186)
		242	INT(187)
		243	INT(188)
		244	INT(189)
		245	INT(190)
		246	INT(191)
		247	INT(192)
		248	INT(193)
		249	INT(194)
		250	INT(195)
		251	INT(196)
		252	INT(197)
		253	INT(198)
		254	INT(199)
		255	INT(200)
		256	INT(201)
		257	INT(202)
		258	INT(203)
		259	INT(204)
		260	INT(205)
		261	INT(206)
		262	INT(207)
		263	INT(208)
		264	INT(209)
		265	INT(210)
		266	INT(211)
		267	INT(212)
		268	INT(213)
		269	INT(214)
		270	INT(215)
		271	INT(216)
		272	INT(217)
		273	INT(218)
		274	INT(219)
		275	INT(220)
		276	INT(221)
		277	INT(222)
		278	INT(223)
		279	INT(224)
		280	INT(225)
		281	INT(226)
		282	INT(227)
		283	INT(228)
		284	INT(229)
		285	INT(230)
		286	INT(231)
		287	INT(232)
		288	INT(233)
		289	INT(234)
		290	INT(235)
		291	INT(236)
		292	INT(237)
		293	INT(238)
		294	INT(239)
		295	INT(240)
		296	INT(241)
		297	INT(242)
		298	INT(243)
		299	INT(244)
		300	INT(245)
		301	INT(246)
		302	INT(247)
		303	INT(248)
		304	INT(249)
		305	INT(250)
		306	INT(251)
		307	INT(252)
		308	INT(253)
		309	INT(254)
		310	INT(255)
		311
2	pj	312	/* The ll_handler process the request using the kernel function act_int() */
		313	/* Then sends EOI & schedules any eventual new task! */
		314
		315	ll_handler:
		316	/* We do not know what is the DS value */
		317	/* Then we save it & set it correctly */
		318
		319	pushl %ds
		320	pushl %ss
		321	pushl %es
		322	pushl %fs
40	pj	323	pushl %gs
2	pj	324	/* But we first transfer to the _act_int */
		325	/* the interrupt number which is required */
		326	/* as second argument */
		327	pushl %eax
		328	movw $(X_FLATDATA_SEL),%ax
		329	movw %ax,%es
		330	mov %ax,%ds
40	pj	331	movw %ax, %fs
		332	movw %ax, %gs
2	pj	333
		334	/* Now save the actual context on stack */
		335	/* to pass it to _act_int (C caling convention) */
		336	/* CLD is necessary when calling a C function */
		337
		338	cld
		339
		340	/* The following could be optimized a little... */
		341	popl %eax
		342	xorl %ebx, %ebx
		343	movw %ss, %bx
		344	/* We must switch to a ``safe stack'' */
		345	/*
		346	* OK, this is the idea: in %esp we have the address of the
		347	* stack pointer in the APPLICATION address space...
		348	* We assume that address spaces are implemented through segments...
		349	* What we have to do is to add the segment base to %esp:
		350	* - Load the GDT base in a register
		351	* - Add DS * 8 to that value
		352	* - Read the corresponding GDT entry (the segment descriptor)
		353	* - Compute the base...
		354	* It is (p & 0xFC) \| ((p +1) & 0x0F) << 16) \| *(p + 2)
		355	*/
		356	movl SYMBOL_NAME(GDT_base), %edi
		357	addl %ebx, %edi
		358	xorl %ebx, %ebx
		359	movb 7(%edi), %bh
		360	movb 4(%edi), %bl
		361	shl $16, %ebx
		362	movw 2(%edi), %bx
		363	/* Is it correct? I think so... Test it!!! */
		364	addl %ebx, %esp
		365	/* Save EBX for returning to our stack... */
		366	movw %ss, %dx
40	pj	367	movw %ds, %cx
		368	movw %cx, %ss
2	pj	369	pushl %ebx
		370	pushl %edx
		371	pushl %eax
		372
		373	movl SYMBOL_NAME(ll_irq_table)(, %eax, 4), %ebx
		374	call *%ebx
		375
		376	popl %ebx /* Store in EBX the Int number */
		377	popl %eax
		378	popl %ecx /* We must subtract it from ESP...*/
		379	subl %ecx, %esp
		380	movw %ax, %ss
		381
		382	/* Resume the return value of _act_int */
		383	/* & do the context switch if necessary! */
		384	#ifdef __VIRCSW__
		385	movw SYMBOL_NAME(currCtx), %ax
		386	cmpw JmpSel,%ax
		387	je NoPreempt3
		388	movw %ax,JmpSel
322	giacomo	389	ljmp *JmpZone
2	pj	390	#endif
		391	NoPreempt3: popl %gs
		392	popl %fs
		393	popl %es
		394	popl %ss
		395	popl %ds
		396	popal
		397	iret
		398
40	pj	399	ll_handler_master_pic:
		400	/* We do not know what is the DS value */
		401	/* Then we save it & set it correctly */
		402
		403	pushl %ds
2	pj	404	pushl %ss
		405	pushl %es
		406	pushl %fs
		407	pushl %gs
40	pj	408	/* But we first transfer to the _act_int */
		409	/* the interrupt number which is required */
		410	/* as second argument */
		411	pushl %eax
		412	movw $(X_FLATDATA_SEL),%ax
		413	movw %ax,%es
		414	mov %ax,%ds
		415	movw %ax, %fs
		416	movw %ax, %gs
		417
		418	/* Now save the actual context on stack */
		419	/* to pass it to _act_int (C caling convention) */
		420	/* CLD is necessary when calling a C function */
		421
2	pj	422	cld
40	pj	423
		424	/* The following could be optimized a little... */
		425	popl %eax
		426	xorl %ebx, %ebx
		427	movw %ss, %bx
		428	/* We must switch to a ``safe stack'' */
		429	/*
		430	* OK, this is the idea: in %esp we have the address of the
		431	* stack pointer in the APPLICATION address space...
		432	* We assume that address spaces are implemented through segments...
		433	* What we have to do is to add the segment base to %esp:
		434	* - Load the GDT base in a register
		435	* - Add DS * 8 to that value
		436	* - Read the corresponding GDT entry (the segment descriptor)
		437	* - Compute the base...
		438	* It is (p & 0xFC) \| ((p +1) & 0x0F) << 16) \| *(p + 2)
		439	*/
		440	movl SYMBOL_NAME(GDT_base), %edi
		441	addl %ebx, %edi
		442	xorl %ebx, %ebx
		443	movb 7(%edi), %bh
		444	movb 4(%edi), %bl
		445	shl $16, %ebx
		446	movw 2(%edi), %bx
		447	/* Is it correct? I think so... Test it!!! */
		448	addl %ebx, %esp
		449	/* Save EBX for returning to our stack... */
		450	movw %ss, %dx
		451	movw %ds, %cx
		452	movw %cx, %ss
		453	pushl %ebx
		454	pushl %edx
		455	pushl %eax
		456
		457	movl SYMBOL_NAME(ll_irq_table)(, %eax, 4), %ebx
		458	call *%ebx
		459
		460	popl %ebx /* Store in EBX the Int number */
		461	popl %eax
		462	popl %ecx /* We must subtract it from ESP...*/
		463	subl %ecx, %esp
		464	movw %ax, %ss
		465
		466	/* Send EOI to master PIC */
		467	movb $0x20,%al
		468	movl $0x20,%edx
		469	outb %al,%dx
		470
		471	/* Resume the return value of _act_int */
		472	/* & do the context switch if necessary! */
		473	#ifdef __VIRCSW__
		474	movw SYMBOL_NAME(currCtx), %ax
		475	cmpw JmpSel,%ax
		476	je NoPreempt4
		477	movw %ax,JmpSel
322	giacomo	478	ljmp *JmpZone
40	pj	479	#endif
		480	NoPreempt4: popl %gs
2	pj	481	popl %fs
		482	popl %es
		483	popl %ss
		484	popl %ds
		485	popal
		486	iret
40	pj	487
		488	ll_handler_slave_pic:
		489	/* We do not know what is the DS value */
		490	/* Then we save it & set it correctly */
2	pj	491
40	pj	492	pushl %ds
		493	pushl %ss
		494	pushl %es
		495	pushl %fs
		496	pushl %gs
		497	/* But we first transfer to the _act_int */
		498	/* the interrupt number which is required */
		499	/* as second argument */
		500	pushl %eax
		501	movw $(X_FLATDATA_SEL),%ax
		502	movw %ax,%es
		503	mov %ax,%ds
		504	movw %ax, %fs
		505	movw %ax, %gs
		506
		507	/* Now save the actual context on stack */
		508	/* to pass it to _act_int (C caling convention) */
		509	/* CLD is necessary when calling a C function */
		510
		511	cld
		512
		513	/* The following could be optimized a little... */
2	pj	514	popl %eax
40	pj	515	xorl %ebx, %ebx
2	pj	516	movw %ss, %bx
		517	/* We must switch to a ``safe stack'' */
40	pj	518	/*
		519	* OK, this is the idea: in %esp we have the address of the
		520	* stack pointer in the APPLICATION address space...
		521	* We assume that address spaces are implemented through segments...
		522	* What we have to do is to add the segment base to %esp:
		523	* - Load the GDT base in a register
		524	* - Add DS * 8 to that value
		525	* - Read the corresponding GDT entry (the segment descriptor)
		526	* - Compute the base...
		527	* It is (p & 0xFC) \| ((p +1) & 0x0F) << 16) \| *(p + 2)
		528	*/
2	pj	529	movl SYMBOL_NAME(GDT_base), %edi
		530	addl %ebx, %edi
		531	xorl %ebx, %ebx
		532	movb 7(%edi), %bh
		533	movb 4(%edi), %bl
		534	shl $16, %ebx
		535	movw 2(%edi), %bx
		536	/* Is it correct? I think so... Test it!!! */
		537	addl %ebx, %esp
		538	/* Save EBX for returning to our stack... */
		539	movw %ss, %dx
40	pj	540	movw %ds, %cx
		541	movw %cx, %ss
2	pj	542	pushl %ebx
		543	pushl %edx
		544	pushl %eax
		545
40	pj	546	movl SYMBOL_NAME(ll_irq_table)(, %eax, 4), %ebx
		547	call *%ebx
		548
		549	popl %ebx /* Store in EBX the Int number */
		550	popl %eax
		551	popl %ecx /* We must subtract it from ESP...*/
		552	subl %ecx, %esp
		553	movw %ax, %ss
		554
		555	/* Send EOI to master & slave PIC */
		556	movb $0x20,%al
		557	movl $0xA0,%edx
		558	outb %al,%dx
		559	movl $0x20,%edx
		560	outb %al,%dx
		561
		562
		563	/* Resume the return value of _act_int */
		564	/* & do the context switch if necessary! */
		565	#ifdef __VIRCSW__
		566	movw SYMBOL_NAME(currCtx), %ax
		567	cmpw JmpSel,%ax
		568	je NoPreempt5
		569	movw %ax,JmpSel
322	giacomo	570	ljmp *JmpZone
40	pj	571	#endif
		572	NoPreempt5: popl %gs
		573	popl %fs
		574	popl %es
		575	popl %ss
		576	popl %ds
		577	popal
2	pj	578	iret
40	pj	579
		580
		581
		582
		583	/* OK, this is Exception 7, and it is generated when an ESC or WAIT
		584	* intruction is reached, and the MP and TS bits are set... Basically,
		585	* it means that the FPU context must be switched
		586	*/
		587	SYMBOL_NAME_LABEL(exc7) pushal
		588	pushl %ds
		589	pushl %ss
		590	pushl %es
		591	pushl %fs
		592	pushl %gs
		593	movw $(X_FLATDATA_SEL),%ax
		594	movw %ax,%es
		595	movw %ax,%ds
		596	cld
		597	call SYMBOL_NAME(ll_FPU_hook)
		598	popl %gs
		599	popl %fs
		600	popl %es
		601	popl %ss
		602	popl %ds
		603	popal
		604	iret

Subversion Repositories shark

(root)/shark/trunk/oslib/xlib/exc.s @ 440 - Rev 322