Subversion Repositories shark

# S.Ha.R.K. Setup File

#

# Compiler selection option

# S.Ha.R.K. 1.5.2 added the support of gcc 4 and higher versions.

# However, some options are not compatible with gcc 3 (and DJGPP).

# COMPILER = GCC3, GCC4, DJGPP

COMPILER = GCC4

# Kernel Image Start Point

# MEM_START = 0x220000

# The kernel image file will be loaded starting from this

# physical memory address. For DOS users, it is important

# to set an high address (like 0x1720000) if you are using

# Smartdrive or other tools which require Extended Memory

MEM_START = 0x220000

# Enable the system time computation through TSC register

# Only Pentium or higher CPU class

TSC = TRUE

# Enable timer interrupt through P6 APIC instead of PIT

# Only P6 or higher CPU class, TSC support must be enabled

APIC = TRUE

# Enable TSC Read Timer Optimization

# TIMER_OPT = 1000 (For CPU < 1 GHz          - Wraparound 585 years)

# TIMER_OPT = 2000 (For 1 GHz < CPU < 2 GHz  - Wraparound 146 years)

# TIMER_OPT = 4000 (For 2 GHz < CPU < 4 GHz  - Wraparound  36 years)

# TIMER_OPT = 8000 (For CPU < 8 GHz          - Wraparound 292 years)

TIMER_OPT = 8000

# Select the events tracer

# TRACER = NO,OLD,NEW

TRACER = NO

# Select the BIOS INTERRUPT access mode

# BIOS = X,VM86

# X    means that you must use x.exe as shark loader

#      if shark needs to call BIOS interrupt (Ex. to enable

#      graphics)

# VM86 means that shark call the BIOS interrupts as

#      Virtual Machine 86, and you can load a graphical

#      demo also through GRUB. VM86 MODE IS NOT COMPATIBLE

#      WITH SOME VGA CARDS (like MATROX)

BIOS = X

# Select the FrameBuffer Configuration

# FB = VESA,FINDPCI,VGA16

# VESA	  it uses the VBE interrupts to enable the

#	  selected video mode

# FINDPCI the FrameBuffer driver will try to find a

#	  PCI/AGP graphical card. If a card is found, FB will

#	  use a specific driver to enable it

# VGA16   enable the VGA16 (4 bpp) video mode

FB = VESA

# Select the FrameGrabber Configuration

# FG = NORMAL, FORCE_PXC

# NORMAL     default mode

# FORCE_PXC  it forces the frame grabber to init a PXC200 card

FG = NORMAL

# Select the S.Ha.R.K. file system support

# YES = build the FS library

# NO = do not build the FS library

SHARK_FS = NO