WebSVN - shark - Blame - Rev 1618 - /shark/branches/xen/drivers/cm7326/mxb.c

Rev	Author	Line No.	Line
425	giacomo	1	/*
		2	mxb.c - v4l2 driver for the Multimedia eXtension Board
		3
		4	Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
		5
		6	Visit http://www.mihu.de/linux/saa7146/mxb/
		7	for further details about this card.
		8
		9	This program is free software; you can redistribute it and/or modify
		10	it under the terms of the GNU General Public License as published by
		11	the Free Software Foundation; either version 2 of the License, or
		12	(at your option) any later version.
		13
		14	This program is distributed in the hope that it will be useful,
		15	but WITHOUT ANY WARRANTY; without even the implied warranty of
		16	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		17	GNU General Public License for more details.
		18
		19	You should have received a copy of the GNU General Public License
		20	along with this program; if not, write to the Free Software
		21	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
		22	*/
		23
		24	#define DEBUG_VARIABLE debug
		25
		26	#include <media/saa7146_vv.h>
		27	#include <linux/video_decoder.h> /* for saa7111a */
		28
		29	#include "mxb.h"
		30	#include "tea6415c.h"
		31	#include "tea6420.h"
		32	#include "tda9840.h"
		33	#include <media/tuner.h>
		34
		35	#define I2C_SAA7111A 0x24
		36
		37	/* All unused bytes are reserverd. */
		38	#define SAA711X_CHIP_VERSION 0x00
		39	#define SAA711X_ANALOG_INPUT_CONTROL_1 0x02
		40	#define SAA711X_ANALOG_INPUT_CONTROL_2 0x03
		41	#define SAA711X_ANALOG_INPUT_CONTROL_3 0x04
		42	#define SAA711X_ANALOG_INPUT_CONTROL_4 0x05
		43	#define SAA711X_HORIZONTAL_SYNC_START 0x06
		44	#define SAA711X_HORIZONTAL_SYNC_STOP 0x07
		45	#define SAA711X_SYNC_CONTROL 0x08
		46	#define SAA711X_LUMINANCE_CONTROL 0x09
		47	#define SAA711X_LUMINANCE_BRIGHTNESS 0x0A
		48	#define SAA711X_LUMINANCE_CONTRAST 0x0B
		49	#define SAA711X_CHROMA_SATURATION 0x0C
		50	#define SAA711X_CHROMA_HUE_CONTROL 0x0D
		51	#define SAA711X_CHROMA_CONTROL 0x0E
		52	#define SAA711X_FORMAT_DELAY_CONTROL 0x10
		53	#define SAA711X_OUTPUT_CONTROL_1 0x11
		54	#define SAA711X_OUTPUT_CONTROL_2 0x12
		55	#define SAA711X_OUTPUT_CONTROL_3 0x13
		56	#define SAA711X_V_GATE_1_START 0x15
		57	#define SAA711X_V_GATE_1_STOP 0x16
		58	#define SAA711X_V_GATE_1_MSB 0x17
		59	#define SAA711X_TEXT_SLICER_STATUS 0x1A
		60	#define SAA711X_DECODED_BYTES_OF_TS_1 0x1B
		61	#define SAA711X_DECODED_BYTES_OF_TS_2 0x1C
		62	#define SAA711X_STATUS_BYTE 0x1F
		63
		64	#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0)
		65
		66	/* global variable */
		67	static int mxb_num = 0;
		68
		69	/* initial frequence the tuner will be tuned to.
		70	in verden (lower saxony, germany) 4148 is a
		71	channel called "phoenix" */
		72	static int freq = 4148;
		73	MODULE_PARM(freq,"i");
		74	MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
		75
		76	static int debug = 0;
		77	MODULE_PARM(debug,"i");
		78	MODULE_PARM_DESC(debug, "debug verbosity");
		79
		80	#define MXB_INPUTS 4
		81	enum { TUNER, AUX1, AUX3, AUX3_YC };
		82
		83	static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
		84	{ TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG\|V4L2_STD_NTSC_M, 0 },
		85	{ AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG\|V4L2_STD_NTSC_M, 0 },
		86	{ AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG\|V4L2_STD_NTSC_M, 0 },
		87	{ AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG\|V4L2_STD_NTSC_M, 0 },
		88	};
		89
		90	/* this array holds the information, which port of the saa7146 each
		91	input actually uses. the mxb uses port 0 for every input */
		92	static struct {
		93	int hps_source;
		94	int hps_sync;
		95	} input_port_selection[MXB_INPUTS] = {
		96	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
		97	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
		98	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
		99	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
		100	};
		101
		102	/* this array holds the information of the audio source (mxb_audios),
		103	which has to be switched corresponding to the video source (mxb_channels) */
		104	static int video_audio_connect[MXB_INPUTS] =
		105	{ 0, 1, 3, 3 };
		106
		107	/* these are the necessary input-output-pins for bringing one audio source
		108	(see above) to the CD-output */
		109	static struct tea6420_multiplex TEA6420_cd[MXB_AUDIOS+1][2] =
		110	{
		111	{{1,1,0},{1,1,0}}, /* Tuner */
		112	{{5,1,0},{6,1,0}}, /* AUX 1 */
		113	{{4,1,0},{6,1,0}}, /* AUX 2 */
		114	{{3,1,0},{6,1,0}}, /* AUX 3 */
		115	{{1,1,0},{3,1,0}}, /* Radio */
		116	{{1,1,0},{2,1,0}}, /* CD-Rom */
		117	{{6,1,0},{6,1,0}} /* Mute */
		118	};
		119
		120	/* these are the necessary input-output-pins for bringing one audio source
		121	(see above) to the line-output */
		122	static struct tea6420_multiplex TEA6420_line[MXB_AUDIOS+1][2] =
		123	{
		124	{{2,3,0},{1,2,0}},
		125	{{5,3,0},{6,2,0}},
		126	{{4,3,0},{6,2,0}},
		127	{{3,3,0},{6,2,0}},
		128	{{2,3,0},{3,2,0}},
		129	{{2,3,0},{2,2,0}},
		130	{{6,3,0},{6,2,0}} /* Mute */
		131	};
		132
		133	#define MAXCONTROLS 1
		134	static struct v4l2_queryctrl mxb_controls[] = {
		135	{ V4L2_CID_AUDIO_MUTE, V4L2_CTRL_TYPE_BOOLEAN, "Mute", 0, 1, 1, 0, 0 },
		136	};
		137
		138	static struct saa7146_extension_ioctls ioctls[] = {
		139	{ VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE },
		140	{ VIDIOC_G_INPUT, SAA7146_EXCLUSIVE },
		141	{ VIDIOC_S_INPUT, SAA7146_EXCLUSIVE },
		142	{ VIDIOC_QUERYCTRL, SAA7146_BEFORE },
		143	{ VIDIOC_G_CTRL, SAA7146_BEFORE },
		144	{ VIDIOC_S_CTRL, SAA7146_BEFORE },
		145	{ VIDIOC_G_TUNER, SAA7146_EXCLUSIVE },
		146	{ VIDIOC_S_TUNER, SAA7146_EXCLUSIVE },
		147	{ VIDIOC_G_FREQUENCY, SAA7146_EXCLUSIVE },
		148	{ VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE },
		149	{ VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE },
		150	{ VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE },
		151	{ MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */
		152	{ MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */
		153	{ 0, 0 }
		154	};
		155
		156	struct mxb
		157	{
		158	struct video_device video_dev;
		159	struct video_device vbi_dev;
		160
		161	struct i2c_adapter i2c_adapter;
		162
		163	struct i2c_client* saa7111a;
		164	struct i2c_client* tda9840;
		165	struct i2c_client* tea6415c;
		166	struct i2c_client* tuner;
		167	struct i2c_client* tea6420_1;
		168	struct i2c_client* tea6420_2;
		169
		170	int cur_mode; /* current audio mode (mono, stereo, ...) */
		171	int cur_input; /* current input */
		172	int cur_freq; /* current frequency the tuner is tuned to */
		173	int cur_mute; /* current mute status */
		174	};
		175
		176	static struct saa7146_extension extension;
		177
		178	static int mxb_vbi_bypass(struct saa7146_dev* dev)
		179	{
		180	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		181	s32 byte = 0x0;
		182	int result = 0;
		183
		184	DEB_EE(("dev:%p\n",dev));
		185
		186	/* switch bypass in saa7111a, this should be done in the
		187	saa7111a driver of course... */
		188	if ( -1 == (result = i2c_smbus_read_byte_data(mxb->saa7111a, SAA711X_OUTPUT_CONTROL_3))) {
		189	DEB_D(("could not read from saa7111a.\n"));
		190	return -EFAULT;
		191	}
		192	byte = result;
		193	byte &= 0xf0;
		194	byte \|= 0x0a;
		195
		196	if ( 0 != (result = i2c_smbus_write_byte_data(mxb->saa7111a, SAA711X_OUTPUT_CONTROL_3, byte))) {
		197	DEB_D(("could not write to saa7111a.\n"));
		198	return -EFAULT;
		199	}
		200	return 0;
		201	}
		202
		203	static int mxb_probe(struct saa7146_dev* dev)
		204	{
		205	struct mxb* mxb = 0;
		206	int i = 0;
		207
		208	request_module("tuner");
		209	request_module("tea6420");
		210	request_module("tea6415c");
		211	request_module("tda9840");
		212	request_module("saa7111");
		213
		214	mxb = (struct mxb*)kmalloc(sizeof(struct mxb), GFP_KERNEL);
		215	if( NULL == mxb ) {
		216	DEB_D(("not enough kernel memory.\n"));
		217	return -ENOMEM;
		218	}
		219	memset(mxb, 0x0, sizeof(struct mxb));
		220
		221	saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
		222	if(i2c_add_adapter(&mxb->i2c_adapter) < 0) {
		223	DEB_S(("cannot register i2c-device. skipping.\n"));
		224	kfree(mxb);
		225	return -EFAULT;
		226	}
		227
		228	/* loop through all i2c-devices on the bus and look who is there */
		229	for(i = 0; i < I2C_CLIENT_MAX; i++) {
		230	if( NULL == mxb->i2c_adapter.clients[i] ) {
		231	continue;
		232	}
		233	if( I2C_TEA6420_1 == mxb->i2c_adapter.clients[i]->addr )
		234	mxb->tea6420_1 = mxb->i2c_adapter.clients[i];
		235	if( I2C_TEA6420_2 == mxb->i2c_adapter.clients[i]->addr )
		236	mxb->tea6420_2 = mxb->i2c_adapter.clients[i];
		237	if( I2C_TEA6415C_2 == mxb->i2c_adapter.clients[i]->addr )
		238	mxb->tea6415c = mxb->i2c_adapter.clients[i];
		239	if( I2C_TDA9840 == mxb->i2c_adapter.clients[i]->addr )
		240	mxb->tda9840 = mxb->i2c_adapter.clients[i];
		241	if( I2C_SAA7111A == mxb->i2c_adapter.clients[i]->addr )
		242	mxb->saa7111a = mxb->i2c_adapter.clients[i];
		243	if( 0x60 == mxb->i2c_adapter.clients[i]->addr )
		244	mxb->tuner = mxb->i2c_adapter.clients[i];
		245	}
		246
		247	/* check if all devices are present */
		248	if( 0 == mxb->tea6420_1 \|\| 0 == mxb->tea6420_2 \|\| 0 == mxb->tea6415c
		249	\|\| 0 == mxb->tda9840 \|\| 0 == mxb->saa7111a \|\| 0 == mxb->tuner ) {
		250
		251	printk("mxb: did not find all i2c devices. are you sure you\n");
		252	printk("mxb: insmod'ed tea6420, tea6415c, saa7111, tea6415c and tuner?\n");
		253	i2c_del_adapter(&mxb->i2c_adapter);
		254	kfree(mxb);
		255	return -ENODEV;
		256	}
		257
		258	/* all devices are present, probe was successful */
		259
		260	/* we store the pointer in our private data field */
		261	(struct mxb*)dev->ext_priv = mxb;
		262
		263	return 0;
		264	}
		265
		266	/* some init data for the saa7740, the so-called 'sound arena module'.
		267	there are no specs available, so we simply use some init values */
		268	static struct {
		269	int length;
		270	char data[9];
		271	} mxb_saa7740_init[] = {
		272	{ 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
		273	{ 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
		274	{ 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
		275	{ 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
		276	{ 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
		277	{ 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
		278	{ 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
		279	{ 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
		280	{ 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
		281	{ 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
		282	{ 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
		283	{ 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
		284	{ 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
		285	{ 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
		286	{ 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
		287	{ 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
		288	{ 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
		289	{ 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
		290	{ 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
		291	{ 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
		292	{ 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
		293	{ 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
		294	{ 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
		295	{ 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
		296	{ 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
		297	{ 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
		298	{ 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
		299	{ 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
		300	{ 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
		301	{ 3, { 0x48, 0x00, 0x01 } },
		302	{ 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
		303	{ 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
		304	{ 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
		305	{ 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
		306	{ 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
		307	{ 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
		308	{ 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
		309	{ 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
		310	{ 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
		311	{ 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
		312	{ 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
		313	{ 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
		314	{ 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
		315	{ 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
		316	{ 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
		317	{ 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
		318	{ 3, { 0x80, 0xb3, 0x0a } },
		319	{-1, { 0} }
		320	};
		321
		322	static unsigned char mxb_saa7111_init[25] = {
		323	0x00,
		324
		325	0x00, /* 00 - ID byte */
		326	0x00, /* 01 - reserved */
		327
		328	/front end /
		329	0xd8, /* 02 - FUSE=x, GUDL=x, MODE=x */
		330	0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
		331	0x00, /* 04 - GAI1=256 */
		332	0x00, /* 05 - GAI2=256 */
		333
		334	/* decoder */
		335	0xf0, /* 06 - HSB at xx(50Hz) / xx(60Hz) pixels after end of last line */
		336	0x30, /* 07 - HSS at xx(50Hz) / xx(60Hz) pixels after end of last line */
		337	0xa8, /* 08 - AUFD=x, FSEL=x, EXFIL=x, VTRC=x, HPLL=x, VNOI=x */
		338	0x02, /* 09 - BYPS=x, PREF=x, BPSS=x, VBLB=x, UPTCV=x, APER=x */
		339	0x80, /* 0a - BRIG=128 */
		340	0x47, /* 0b - CONT=1.109 */
		341	0x40, /* 0c - SATN=1.0 */
		342	0x00, /* 0d - HUE=0 */
		343	0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */
		344	0x00, /* 0f - reserved */
		345	0xd0, /* 10 - OFTS=x, HDEL=x, VRLN=x, YDEL=x */
		346	0x8c, /* 11 - GPSW=x, CM99=x, FECO=x, COMPO=x, OEYC=1, OEHV=1, VIPB=0, COLO=0 */
		347	0x80, /* 12 - xx output control 2 */
		348	0x30, /* 13 - xx output control 3 */
		349	0x00, /* 14 - reserved */
		350	0x15, /* 15 - VBI */
		351	0x04, /* 16 - VBI */
		352	0x00, /* 17 - VBI */
		353	};
		354
		355	/* bring hardware to a sane state. this has to be done, just in case someone
		356	wants to capture from this device before it has been properly initialized.
		357	the capture engine would badly fail, because no valid signal arrives on the
		358	saa7146, thus leading to timeouts and stuff. */
		359	static int mxb_init_done(struct saa7146_dev* dev)
		360	{
		361	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		362
		363	struct i2c_msg msg;
		364
		365	int i = 0, err = 0;
		366	struct tea6415c_multiplex vm;
		367
		368	/* write configuration to saa7111a */
		369	i = i2c_master_send(mxb->saa7111a, mxb_saa7111_init, sizeof(mxb_saa7111_init));
		370	if (i < 0) {
		371	printk("failed to initialize saa7111a. this should never happen.\n");
		372	}
		373
		374	/* select tuner-output on saa7111a */
		375	i = 0;
		376	mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i);
		377	// i = VIDEO_MODE_PAL;
		378	// mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_NORM, &i);
		379
		380	mxb_vbi_bypass(dev);
		381
		382	/* select a tuner type */
		383	i = 5;
		384	mxb->tuner->driver->command(mxb->tuner,TUNER_SET_TYPE, &i);
		385
		386	/* mute audio on tea6420s */
		387	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
		388	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
		389	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[6][0]);
		390	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[6][1]);
		391
		392	/* switch to tuner-channel on tea6415c*/
		393	vm.out = 17;
		394	vm.in = 3;
		395	mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);
		396
		397	/* select tuner-output on multicable on tea6415c*/
		398	vm.in = 3;
		399	vm.out = 13;
		400	mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);
		401
		402	/* tune in some frequency on tuner */
		403	mxb->tuner->driver->command(mxb->tuner, VIDIOCSFREQ, &freq);
		404
		405	/* the rest for mxb */
		406	mxb->cur_input = 0;
		407	mxb->cur_freq = freq;
		408	mxb->cur_mute = 1;
		409
		410	mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
		411	mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode);
		412
		413	/* check if the saa7740 (aka 'sound arena module') is present
		414	on the mxb. if so, we must initialize it. due to lack of
		415	informations about the saa7740, the values were reverse
		416	engineered. */
		417	msg.addr = 0x1b;
		418	msg.flags = 0;
		419	msg.len = mxb_saa7740_init[0].length;
		420	msg.buf = &mxb_saa7740_init[0].data[0];
		421
		422	if( 1 == (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) {
		423	/* the sound arena module is a pos, that's probably the reason
		424	philips refuses to hand out a datasheet for the saa7740...
		425	it seems to screw up the i2c bus, so we disable fast irq
		426	based i2c transactions here and rely on the slow and safe
		427	polling method ... */
		428	extension.flags &= ~SAA7146_USE_I2C_IRQ;
		429	for(i = 1;;i++) {
		430	if( -1 == mxb_saa7740_init[i].length ) {
		431	break;
		432	}
		433
		434	msg.len = mxb_saa7740_init[i].length;
		435	msg.buf = &mxb_saa7740_init[i].data[0];
		436	if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) {
		437	DEB_D(("failed to initialize 'sound arena module'.\n"));
		438	goto err;
		439	}
		440	}
		441	INFO(("'sound arena module' detected.\n"));
		442	}
		443	err:
		444	/* the rest for saa7146: you should definitely set some basic values
		445	for the input-port handling of the saa7146. */
		446
		447	/* ext->saa has been filled by the core driver */
		448
		449	/* some stuff is done via variables */
		450	saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync);
		451
		452	/* some stuff is done via direct write to the registers */
		453
		454	/* this is ugly, but because of the fact that this is completely
		455	hardware dependend, it should be done directly... */
		456	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
		457	saa7146_write(dev, DD1_INIT, 0x02000200);
		458	saa7146_write(dev, MC2, (MASK_09 \| MASK_25 \| MASK_10 \| MASK_26));
		459
		460	return 0;
		461	}
		462
		463	/* interrupt-handler. this gets called when irq_mask is != 0.
		464	it must clear the interrupt-bits in irq_mask it has handled */
		465	/*
		466	void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
		467	{
		468	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		469	}
		470	*/
		471
		472	static struct saa7146_ext_vv vv_data;
		473
		474	/* this function only gets called when the probing was successful */
		475	static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
		476	{
		477	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		478
		479	DEB_EE(("dev:%p\n",dev));
		480
		481	/* checking for i2c-devices can be omitted here, because we
		482	already did this in "mxb_vl42_probe" */
		483
		484	saa7146_vv_init(dev,&vv_data);
		485	if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
		486	ERR(("cannot register capture v4l2 device. skipping.\n"));
		487	return -1;
		488	}
		489
		490	/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
		491	if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) {
		492	if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
		493	ERR(("cannot register vbi v4l2 device. skipping.\n"));
		494	}
		495	}
		496
		497	i2c_use_client(mxb->tea6420_1);
		498	i2c_use_client(mxb->tea6420_2);
		499	i2c_use_client(mxb->tea6415c);
		500	i2c_use_client(mxb->tda9840);
		501	i2c_use_client(mxb->saa7111a);
		502	i2c_use_client(mxb->tuner);
		503
		504	printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num);
		505
		506	mxb_num++;
		507	mxb_init_done(dev);
		508	return 0;
		509	}
		510
		511	static int mxb_detach(struct saa7146_dev* dev)
		512	{
		513	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		514
		515	DEB_EE(("dev:%p\n",dev));
		516
		517	i2c_release_client(mxb->tea6420_1);
		518	i2c_release_client(mxb->tea6420_2);
		519	i2c_release_client(mxb->tea6415c);
		520	i2c_release_client(mxb->tda9840);
		521	i2c_release_client(mxb->saa7111a);
		522	i2c_release_client(mxb->tuner);
		523
		524	saa7146_unregister_device(&mxb->video_dev,dev);
		525	if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) {
		526	saa7146_unregister_device(&mxb->vbi_dev,dev);
		527	}
		528	saa7146_vv_release(dev);
		529
		530	mxb_num--;
		531
		532	i2c_del_adapter(&mxb->i2c_adapter);
		533	kfree(mxb);
		534
		535	return 0;
		536	}
		537
		538	/* hack: this should go into saa711x */
		539	static int saa7111_set_gpio(struct saa7146_dev *dev, int bl)
		540	{
		541	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		542	s32 byte = 0x0;
		543	int result = 0;
		544
		545	DEB_EE(("dev:%p\n",dev));
		546
		547	/* get the old register contents */
		548	if ( -1 == (byte = i2c_smbus_read_byte_data(mxb->saa7111a, SAA711X_OUTPUT_CONTROL_1))) {
		549	DEB_D(("could not read from saa711x\n"));
		550	return -EFAULT;
		551	}
		552
		553	if( 0 == bl ) {
		554	byte &= 0x7f;
		555	} else {
		556	byte \|= 0x80;
		557	}
		558
		559	/* write register contents back */
		560	if ( 0 != (result = i2c_smbus_write_byte_data(mxb->saa7111a, SAA711X_OUTPUT_CONTROL_1, byte))) {
		561	DEB_D(("could not write to saa711x\n"));
		562	return -EFAULT;
		563	}
		564
		565	return 0;
		566	}
		567
		568	static int mxb_ioctl(struct saa7146_fh fh, unsigned int cmd, void arg)
		569	{
		570	struct saa7146_dev *dev = fh->dev;
		571	struct mxb* mxb = (struct mxb*)dev->ext_priv;
		572	struct saa7146_vv *vv = dev->vv_data;
		573
		574	switch(cmd) {
		575	case VIDIOC_ENUMINPUT:
		576	{
		577	struct v4l2_input *i = arg;
		578
		579	DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index));
		580	if( i->index < 0 \|\| i->index >= MXB_INPUTS) {
		581	return -EINVAL;
		582	}
		583	memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
		584
		585	return 0;
		586	}
		587	/* the saa7146 provides some controls (brightness, contrast, saturation)
		588	which gets registered after this function. because of this we have
		589	to return with a value != 0 even if the function succeded.. */
		590	case VIDIOC_QUERYCTRL:
		591	{
		592	struct v4l2_queryctrl *qc = arg;
		593	int i;
		594
		595	for (i = MAXCONTROLS - 1; i >= 0; i--) {
		596	if (mxb_controls[i].id == qc->id) {
		597	*qc = mxb_controls[i];
		598	DEB_D(("VIDIOC_QUERYCTRL %d.\n",qc->id));
		599	return 0;
		600	}
		601	}
		602	return -EAGAIN;
		603	}
		604	case VIDIOC_G_CTRL:
		605	{
		606	struct v4l2_control *vc = arg;
		607	int i;
		608
		609	for (i = MAXCONTROLS - 1; i >= 0; i--) {
		610	if (mxb_controls[i].id == vc->id) {
		611	break;
		612	}
		613	}
		614
		615	if( i < 0 ) {
		616	return -EAGAIN;
		617	}
		618
		619	switch (vc->id ) {
		620	case V4L2_CID_AUDIO_MUTE: {
		621	vc->value = mxb->cur_mute;
		622	DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value));
		623	return 0;
		624	}
		625	}
		626
		627	DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value));
		628	return 0;
		629	}
		630
		631	case VIDIOC_S_CTRL:
		632	{
		633	struct v4l2_control *vc = arg;
		634	int i = 0;
		635
		636	for (i = MAXCONTROLS - 1; i >= 0; i--) {
		637	if (mxb_controls[i].id == vc->id) {
		638	break;
		639	}
		640	}
		641
		642	if( i < 0 ) {
		643	return -EAGAIN;
		644	}
		645
		646	switch (vc->id ) {
		647	case V4L2_CID_AUDIO_MUTE: {
		648	mxb->cur_mute = vc->value;
		649	if( 0 == vc->value ) {
		650	/* switch the audio-source */
		651	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][0]);
		652	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][1]);
		653	} else {
		654	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
		655	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
		656	}
		657	DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n",vc->value));
		658	break;
		659	}
		660	}
		661	return 0;
		662	}
		663	case VIDIOC_G_INPUT:
		664	{
		665	int input = (int )arg;
		666	*input = mxb->cur_input;
		667
		668	DEB_EE(("VIDIOC_G_INPUT %d.\n",*input));
		669	return 0;
		670	}
		671	case VIDIOC_S_INPUT:
		672	{
		673	int input = (int )arg;
		674	struct tea6415c_multiplex vm;
		675	int i = 0;
		676
		677	DEB_EE(("VIDIOC_S_INPUT %d.\n",input));
		678
		679	if (input < 0 \|\| input >= MXB_INPUTS) {
		680	return -EINVAL;
		681	}
		682
		683	/* fixme: locke das setzen des inputs mit hilfe des mutexes
		684	down(&dev->lock);
		685	video_mux(dev,*i);
		686	up(&dev->lock);
		687	*/
		688
		689	/* fixme: check if streaming capture
		690	if ( 0 != dev->streaming ) {
		691	DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n"));
		692	return -EPERM;
		693	}
		694	*/
		695
		696	mxb->cur_input = input;
		697
		698	saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync);
		699
		700	/* prepare switching of tea6415c and saa7111a;
		701	have a look at the 'background'-file for further informations */
		702	switch( input ) {
		703
		704	case TUNER:
		705	{
		706	i = 0;
		707	vm.in = 3;
		708	vm.out = 17;
		709
		710	if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) {
		711	printk("VIDIOC_S_INPUT: could not address tea6415c #1\n");
		712	return -EFAULT;
		713	}
		714	/* connect tuner-output always to multicable */
		715	vm.in = 3;
		716	vm.out = 13;
		717	break;
		718	}
		719	case AUX3_YC:
		720	{
		721	/* nothing to be done here. aux3_yc is
		722	directly connected to the saa711a */
		723	i = 5;
		724	break;
		725	}
		726	case AUX3:
		727	{
		728	/* nothing to be done here. aux3 is
		729	directly connected to the saa711a */
		730	i = 1;
		731	break;
		732	}
		733	case AUX1:
		734	{
		735	i = 0;
		736	vm.in = 1;
		737	vm.out = 17;
		738	break;
		739	}
		740	}
		741
		742	/* switch video in tea6415c only if necessary */
		743	switch( input ) {
		744	case TUNER:
		745	case AUX1:
		746	{
		747	if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) {
		748	printk("VIDIOC_S_INPUT: could not address tea6415c #3\n");
		749	return -EFAULT;
		750	}
		751	break;
		752	}
		753	default:
		754	{
		755	break;
		756	}
		757	}
		758
		759	/* switch video in saa7111a */
		760	if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) {
		761	printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n");
		762	}
		763
		764	/* switch the audio-source only if necessary */
		765	if( 0 == mxb->cur_mute ) {
		766	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][0]);
		767	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][1]);
		768	}
		769
		770	return 0;
		771	}
		772	case VIDIOC_G_TUNER:
		773	{
		774	struct v4l2_tuner *t = arg;
		775	int byte = 0;
		776
		777	if( 0 != t->index ) {
		778	DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index));
		779	return -EINVAL;
		780	}
		781
		782	DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index));
		783
		784	memset(t,0,sizeof(*t));
		785	strcpy(t->name, "Television");
		786
		787	t->type = V4L2_TUNER_ANALOG_TV;
		788	t->capability = V4L2_TUNER_CAP_NORM \| V4L2_TUNER_CAP_STEREO \| V4L2_TUNER_CAP_LANG1 \| V4L2_TUNER_CAP_LANG2 \| V4L2_TUNER_CAP_SAP;
		789	t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */
		790	t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */
		791	/* FIXME: add the real signal strength here */
		792	t->signal = 0xffff;
		793	t->afc = 0;
		794
		795	byte = mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, NULL);
		796	t->audmode = mxb->cur_mode;
		797
		798	if( byte < 0 ) {
		799	t->rxsubchans = V4L2_TUNER_SUB_MONO;
		800	} else {
		801	switch(byte) {
		802	case TDA9840_MONO_DETECT: {
		803	t->rxsubchans = V4L2_TUNER_SUB_MONO;
		804	DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_MONO.\n"));
		805	break;
		806	}
		807	case TDA9840_DUAL_DETECT: {
		808	t->rxsubchans = V4L2_TUNER_SUB_LANG1 \| V4L2_TUNER_SUB_LANG2;
		809	DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_LANG1.\n"));
		810	break;
		811	}
		812	case TDA9840_STEREO_DETECT: {
		813	t->rxsubchans = V4L2_TUNER_SUB_STEREO \| V4L2_TUNER_SUB_MONO;
		814	DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_STEREO.\n"));
		815	break;
		816	}
		817	default: { /* TDA9840_INCORRECT_DETECT */
		818	t->rxsubchans = V4L2_TUNER_MODE_MONO;
		819	DEB_D(("VIDIOC_G_TUNER: TDA9840_INCORRECT_DETECT => V4L2_TUNER_MODE_MONO\n"));
		820	break;
		821	}
		822	}
		823	}
		824
		825	return 0;
		826	}
		827	case VIDIOC_S_TUNER:
		828	{
		829	struct v4l2_tuner *t = arg;
		830	int result = 0;
		831	int byte = 0;
		832
		833	if( 0 != t->index ) {
		834	DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index));
		835	return -EINVAL;
		836	}
		837
		838	switch(t->audmode) {
		839	case V4L2_TUNER_MODE_STEREO: {
		840	mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
		841	byte = TDA9840_SET_STEREO;
		842	DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n"));
		843	break;
		844	}
		845	case V4L2_TUNER_MODE_LANG1: {
		846	mxb->cur_mode = V4L2_TUNER_MODE_LANG1;
		847	byte = TDA9840_SET_LANG1;
		848	DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n"));
		849	break;
		850	}
		851	case V4L2_TUNER_MODE_LANG2: {
		852	mxb->cur_mode = V4L2_TUNER_MODE_LANG2;
		853	byte = TDA9840_SET_LANG2;
		854	DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n"));
		855	break;
		856	}
		857	default: { /* case V4L2_TUNER_MODE_MONO: {*/
		858	mxb->cur_mode = V4L2_TUNER_MODE_MONO;
		859	byte = TDA9840_SET_MONO;
		860	DEB_D(("VIDIOC_S_TUNER: TDA9840_SET_MONO\n"));
		861	break;
		862	}
		863	}
		864
		865	if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) {
		866	printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte);
		867	}
		868
		869	return 0;
		870	}
		871	case VIDIOC_G_FREQUENCY:
		872	{
		873	struct v4l2_frequency *f = arg;
		874
		875	if(0 != mxb->cur_input) {
		876	DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",mxb->cur_input));
		877	return -EINVAL;
		878	}
		879
		880	memset(f,0,sizeof(*f));
		881	f->type = V4L2_TUNER_ANALOG_TV;
		882	f->frequency = mxb->cur_freq;
		883
		884	DEB_EE(("VIDIOC_G_FREQ: freq:0x%08x.\n", mxb->cur_freq));
		885	return 0;
		886	}
		887	case VIDIOC_S_FREQUENCY:
		888	{
		889	struct v4l2_frequency *f = arg;
		890	int t_locked = 0;
		891	int v_byte = 0;
		892
		893	if (0 != f->tuner)
		894	return -EINVAL;
		895
		896	if (V4L2_TUNER_ANALOG_TV != f->type)
		897	return -EINVAL;
		898
		899	if(0 != mxb->cur_input) {
		900	DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input));
		901	return -EINVAL;
		902	}
		903
		904	DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n",f->frequency));
		905
		906	mxb->cur_freq = f->frequency;
		907
		908	/* tune in desired frequency */
		909	mxb->tuner->driver->command(mxb->tuner, VIDIOCSFREQ, &mxb->cur_freq);
		910
		911	/* check if pll of tuner & saa7111a is locked */
		912	// mxb->tuner->driver->command(mxb->tuner,TUNER_IS_LOCKED, &t_locked);
		913	mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_GET_STATUS, &v_byte);
		914
		915	/* not locked -- anything to do here ? */
		916	if( 0 == t_locked \|\| 0 == (v_byte & DECODER_STATUS_GOOD)) {
		917	}
		918
		919	/* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
		920	spin_lock(&dev->slock);
		921	vv->vbi_fieldcount = 0;
		922	spin_unlock(&dev->slock);
		923
		924	return 0;
		925	}
		926	case MXB_S_AUDIO_CD:
		927	{
		928	int i = (int)arg;
		929
		930	if( i < 0 \|\| i >= MXB_AUDIOS ) {
		931	DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i));
		932	return -EINVAL;
		933	}
		934
		935	DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n",i));
		936
		937	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[i][0]);
		938	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[i][1]);
		939
		940	return 0;
		941	}
		942	case MXB_S_AUDIO_LINE:
		943	{
		944	int i = (int)arg;
		945
		946	if( i < 0 \|\| i >= MXB_AUDIOS ) {
		947	DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i));
		948	return -EINVAL;
		949	}
		950
		951	DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n",i));
		952	mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[i][0]);
		953	mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[i][1]);
		954
		955	return 0;
		956	}
		957	case VIDIOC_G_AUDIO:
		958	{
		959	struct v4l2_audio *a = arg;
		960
		961	if( a->index < 0 \|\| a->index > MXB_INPUTS ) {
		962	DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index));
		963	return -EINVAL;
		964	}
		965
		966	DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index));
		967	memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio));
		968
		969	return 0;
		970	}
		971	case VIDIOC_S_AUDIO:
		972	{
		973	struct v4l2_audio *a = arg;
		974	DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index));
		975	return 0;
		976	}
		977	default:
		978	/*
		979	DEB2(printk("does not handle this ioctl.\n"));
		980	*/
		981	return -ENOIOCTLCMD;
		982	}
		983	return 0;
		984	}
		985
		986	static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
		987	{
		988	if(V4L2_STD_PAL_I == std->id ) {
		989	DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
		990	/* set the 7146 gpio register -- I don't know what this does exactly */
		991	saa7146_write(dev, GPIO_CTRL, 0x00404050);
		992	/* unset the 7111 gpio register -- I don't know what this does exactly */
		993	saa7111_set_gpio(dev,0);
		994	} else {
		995	DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
		996	/* set the 7146 gpio register -- I don't know what this does exactly */
		997	saa7146_write(dev, GPIO_CTRL, 0x00404050);
		998	/* set the 7111 gpio register -- I don't know what this does exactly */
		999	saa7111_set_gpio(dev,1);
		1000	}
		1001	return 0;
		1002	}
		1003
		1004	static struct saa7146_standard standard[] = {
		1005	{
		1006	.name = "PAL-BG", .id = V4L2_STD_PAL_BG,
		1007	.v_offset = 0x17, .v_field = 288, .v_calc = 576,
		1008	.h_offset = 0x14, .h_pixels = 680, .h_calc = 680+1,
		1009	.v_max_out = 576, .h_max_out = 768,
		1010	}, {
		1011	.name = "PAL-I", .id = V4L2_STD_PAL_I,
		1012	.v_offset = 0x17, .v_field = 288, .v_calc = 576,
		1013	.h_offset = 0x14, .h_pixels = 680, .h_calc = 680+1,
		1014	.v_max_out = 576, .h_max_out = 768,
		1015	}, {
		1016	.name = "NTSC", .id = V4L2_STD_NTSC,
		1017	.v_offset = 0x16, .v_field = 240, .v_calc = 480,
		1018	.h_offset = 0x06, .h_pixels = 708, .h_calc = 708+1,
		1019	.v_max_out = 480, .h_max_out = 640,
		1020	}, {
		1021	.name = "SECAM", .id = V4L2_STD_SECAM,
		1022	.v_offset = 0x14, .v_field = 288, .v_calc = 576,
		1023	.h_offset = 0x14, .h_pixels = 720, .h_calc = 720+1,
		1024	.v_max_out = 576, .h_max_out = 768,
		1025	}
		1026	};
		1027
		1028	static struct saa7146_pci_extension_data mxb = {
		1029	.ext_priv = "Multimedia eXtension Board",
		1030	.ext = &extension,
		1031	};
		1032
		1033	static struct pci_device_id pci_tbl[] = {
		1034	{
		1035	.vendor = PCI_VENDOR_ID_PHILIPS,
		1036	.device = PCI_DEVICE_ID_PHILIPS_SAA7146,
		1037	.subvendor = 0x0000,
		1038	.subdevice = 0x0000,
		1039	.driver_data = (unsigned long)&mxb,
		1040	}, {
		1041	.vendor = 0,
		1042	}
		1043	};
		1044
		1045	MODULE_DEVICE_TABLE(pci, pci_tbl);
		1046
		1047	static struct saa7146_ext_vv vv_data = {
		1048	.inputs = MXB_INPUTS,
		1049	.capabilities = V4L2_CAP_TUNER \| V4L2_CAP_VBI_CAPTURE,
		1050	.stds = &standard[0],
		1051	.num_stds = sizeof(standard)/sizeof(struct saa7146_standard),
		1052	.std_callback = &std_callback,
		1053	.ioctls = &ioctls[0],
		1054	.ioctl = mxb_ioctl,
		1055	};
		1056
		1057	static struct saa7146_extension extension = {
		1058	.name = MXB_IDENTIFIER,
		1059	.flags = SAA7146_USE_I2C_IRQ,
		1060
		1061	.pci_tbl = &pci_tbl[0],
		1062	.module = THIS_MODULE,
		1063
		1064	.probe = mxb_probe,
		1065	.attach = mxb_attach,
		1066	.detach = mxb_detach,
		1067
		1068	.irq_mask = 0,
		1069	.irq_func = NULL,
		1070	};
		1071
		1072	int __init mxb_init_module(void)
		1073	{
		1074	if( 0 != saa7146_register_extension(&extension)) {
		1075	DEB_S(("failed to register extension.\n"));
		1076	return -ENODEV;
		1077	}
		1078
		1079	return 0;
		1080	}
		1081
		1082	void __exit mxb_cleanup_module(void)
		1083	{
		1084	saa7146_unregister_extension(&extension);
		1085	}
		1086
		1087	module_init(mxb_init_module);
		1088	module_exit(mxb_cleanup_module);
		1089
		1090	MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
		1091	MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
		1092	MODULE_LICENSE("GPL");

Subversion Repositories shark

(root)/shark/branches/xen/drivers/cm7326/mxb.c @ 1680 - Rev 1618