Subversion Repositories shark

Rev

Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
2 pj 1
/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */
2
/*
3
        Written 1993-1998 by Donald Becker.
4
 
5
        Copyright 1994-1998 by Donald Becker.
6
        Copyright 1993 United States Government as represented by the
7
        Director, National Security Agency.      This software may be used and
8
        distributed according to the terms of the GNU Public License,
9
        incorporated herein by reference.
10
 
11
        This driver is for the 3Com EtherLinkIII series.
12
 
13
        The author may be reached as becker@cesdis.gsfc.nasa.gov or
14
        C/O Center of Excellence in Space Data and Information Sciences
15
                Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
16
 
17
        Known limitations:
18
        Because of the way 3c509 ISA detection works it's difficult to predict
19
        a priori which of several ISA-mode cards will be detected first.
20
 
21
        This driver does not use predictive interrupt mode, resulting in higher
22
        packet latency but lower overhead.  If interrupts are disabled for an
23
        unusually long time it could also result in missed packets, but in
24
        practice this rarely happens.
25
 
26
 
27
        FIXES:
28
                Alan Cox:       Removed the 'Unexpected interrupt' bug.
29
                Michael Meskes: Upgraded to Donald Becker's version 1.07.
30
                Alan Cox:       Increased the eeprom delay. Regardless of
31
                                what the docs say some people definitely
32
                                get problems with lower (but in card spec)
33
                                delays
34
                v1.10 4/21/97 Fixed module code so that multiple cards may be detected,
35
                                other cleanups.  -djb
36
                Andrea Arcangeli:       Upgraded to Donald Becker's version 1.12.
37
                Rick Payne:     Fixed SMP race condition
38
                v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb
39
                v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb
40
                v1.15 1/31/98 Faster recovery for Tx errors. -djb
41
                v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb
42
*/
43
 
44
static char *version = "3c509.c:1.16 (2.2) 2/3/98 becker@cesdis.gsfc.nasa.gov.\n";
45
/* A few values that may be tweaked. */
46
 
47
/* Time in jiffies before concluding the transmitter is hung. */
48
#define TX_TIMEOUT  (400*HZ/1000)
49
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
50
static int max_interrupt_work = 10;
51
 
52
#include <linux/config.h>
53
#include <linux/module.h>
54
 
55
#include <linux/mca.h>
56
#include <linux/sched.h>
57
#include <linux/string.h>
58
#include <linux/interrupt.h>
59
#include <linux/errno.h>
60
#include <linux/in.h>
61
#include <linux/malloc.h>
62
#include <linux/ioport.h>
63
#include <linux/netdevice.h>
64
#include <linux/etherdevice.h>
65
#include <linux/skbuff.h>
66
#include <linux/delay.h>        /* for udelay() */
67
 
68
#include <asm/spinlock.h>
69
#include <asm/bitops.h>
70
#include <asm/io.h>
71
#include <asm/irq.h>
72
 
73
#ifdef EL3_DEBUG
74
int el3_debug = EL3_DEBUG;
75
#else
76
int el3_debug = 2;
77
#endif
78
 
79
/* To minimize the size of the driver source I only define operating
80
   constants if they are used several times.  You'll need the manual
81
   anyway if you want to understand driver details. */
82
/* Offsets from base I/O address. */
83
#define EL3_DATA 0x00
84
#define EL3_CMD 0x0e
85
#define EL3_STATUS 0x0e
86
#define  EEPROM_READ 0x80
87
 
88
#define EL3_IO_EXTENT   16
89
 
90
#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
91
 
92
 
93
/* The top five bits written to EL3_CMD are a command, the lower
94
   11 bits are the parameter, if applicable. */
95
enum c509cmd {
96
        TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
97
        RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
98
        TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
99
        FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
100
        SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
101
        SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
102
        StatsDisable = 22<<11, StopCoax = 23<<11,};
103
 
104
enum c509status {
105
        IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
106
        TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
107
        IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, };
108
 
109
/* The SetRxFilter command accepts the following classes: */
110
enum RxFilter {
111
        RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
112
 
113
/* Register window 1 offsets, the window used in normal operation. */
114
#define TX_FIFO         0x00
115
#define RX_FIFO         0x00
116
#define RX_STATUS       0x08
117
#define TX_STATUS       0x0B
118
#define TX_FREE         0x0C            /* Remaining free bytes in Tx buffer. */
119
 
120
#define WN0_IRQ         0x08            /* Window 0: Set IRQ line in bits 12-15. */
121
#define WN4_MEDIA       0x0A            /* Window 4: Various transcvr/media bits. */
122
#define  MEDIA_TP       0x00C0          /* Enable link beat and jabber for 10baseT. */
123
 
124
/*
125
 * Must be a power of two (we use a binary and in the
126
 * circular queue)
127
 */
128
#define SKB_QUEUE_SIZE  64
129
 
130
struct el3_private {
131
        struct enet_statistics stats;
132
        struct device *next_dev;
133
        spinlock_t lock;
134
        /* skb send-queue */
135
        int head, size;
136
        struct sk_buff *queue[SKB_QUEUE_SIZE];
137
        char mca_slot;
138
};
139
static int id_port = 0x110;             /* Start with 0x110 to avoid new sound cards.*/
140
static struct device *el3_root_dev = NULL;
141
 
142
static ushort id_read_eeprom(int index);
143
static ushort read_eeprom(int ioaddr, int index);
144
static int el3_open(struct device *dev);
145
static int el3_start_xmit(struct sk_buff *skb, struct device *dev);
146
static void el3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
147
static void update_stats(struct device *dev);
148
static struct enet_statistics *el3_get_stats(struct device *dev);
149
static int el3_rx(struct device *dev);
150
static int el3_close(struct device *dev);
151
static void set_multicast_list(struct device *dev);
152
 
153
#ifdef CONFIG_MCA
154
struct el3_mca_adapters_struct {
155
        char* name;
156
        int id;
157
};
158
 
159
struct el3_mca_adapters_struct el3_mca_adapters[] = {
160
        { "3Com 3c529 EtherLink III (10base2)", 0x627c },
161
        { "3Com 3c529 EtherLink III (10baseT)", 0x627d },
162
        { "3Com 3c529 EtherLink III (test mode)", 0x62db },
163
        { "3Com 3c529 EtherLink III (TP or coax)", 0x62f6 },
164
        { "3Com 3c529 EtherLink III (TP)", 0x62f7 },
165
        { NULL, 0 },
166
};
167
#endif
168
 
169
int el3_probe(struct device *dev)
170
{
171
        short lrs_state = 0xff, i;
172
        int ioaddr, irq, if_port;
173
        u16 phys_addr[3];
174
        static int current_tag = 0;
175
        int mca_slot = -1;
176
 
177
        /* First check all slots of the EISA bus.  The next slot address to
178
           probe is kept in 'eisa_addr' to support multiple probe() calls. */
179
        if (EISA_bus) {
180
                static int eisa_addr = 0x1000;
181
                while (eisa_addr < 0x9000) {
182
                        ioaddr = eisa_addr;
183
                        eisa_addr += 0x1000;
184
 
185
                        /* Check the standard EISA ID register for an encoded '3Com'. */
186
                        if (inw(ioaddr + 0xC80) != 0x6d50)
187
                                continue;
188
 
189
                        /* Change the register set to the configuration window 0. */
190
                        outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
191
 
192
                        irq = inw(ioaddr + WN0_IRQ) >> 12;
193
                        if_port = inw(ioaddr + 6)>>14;
194
                        for (i = 0; i < 3; i++)
195
                                phys_addr[i] = htons(read_eeprom(ioaddr, i));
196
 
197
                        /* Restore the "Product ID" to the EEPROM read register. */
198
                        read_eeprom(ioaddr, 3);
199
 
200
                        /* Was the EISA code an add-on hack?  Nahhhhh... */
201
                        goto found;
202
                }
203
        }
204
 
205
#ifdef CONFIG_MCA
206
        /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
207
         * modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
208
         * to support standard MCA probing.
209
         *
210
         * redone for multi-card detection by ZP Gu (zpg@castle.net)
211
         * now works as a module
212
         */
213
 
214
        if( MCA_bus ) {
215
                int slot, j;
216
                u_char pos4, pos5;
217
 
218
                for( j = 0; el3_mca_adapters[j].name != NULL; j ++ ) {
219
                        slot = 0;
220
                        while( slot != MCA_NOTFOUND ) {
221
                                slot = mca_find_unused_adapter(
222
                                        el3_mca_adapters[j].id, slot );
223
                                if( slot == MCA_NOTFOUND ) break;
224
 
225
                                /* if we get this far, an adapter has been
226
                                 * detected and is enabled
227
                                 */
228
 
229
                                pos4 = mca_read_stored_pos( slot, 4 );
230
                                pos5 = mca_read_stored_pos( slot, 5 );
231
 
232
                                ioaddr = ((short)((pos4&0xfc)|0x02)) << 8;
233
                                irq = pos5 & 0x0f;
234
 
235
                                /* probing for a card at a particular IO/IRQ */
236
                                if(dev && ((dev->irq >= 1 && dev->irq != irq) ||
237
                                (dev->base_addr >= 1 && dev->base_addr != ioaddr))) {
238
                                        slot++;         /* probing next slot */
239
                                        continue;
240
                                }
241
 
242
                                printk("3c509: found %s at slot %d\n",
243
                                        el3_mca_adapters[j].name, slot + 1 );
244
 
245
                                /* claim the slot */
246
                                mca_set_adapter_name(slot, el3_mca_adapters[j].name);
247
                                mca_set_adapter_procfn(slot, NULL, NULL);
248
                                mca_mark_as_used(slot);
249
 
250
                                if_port = pos4 & 0x03;
251
                                if (el3_debug > 2) {
252
                                        printk("3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
253
                                }
254
                                for (i = 0; i < 3; i++) {
255
                                        phys_addr[i] = htons(read_eeprom(ioaddr, i));
256
                                }
257
 
258
                                mca_slot = slot;
259
 
260
                                goto found;
261
                        }
262
                }
263
                /* if we get here, we didn't find an MCA adapter */
264
                return -ENODEV;
265
        }
266
#endif
267
        /* Reset the ISA PnP mechanism on 3c509b. */
268
        outb(0x02, 0x279);           /* Select PnP config control register. */
269
        outb(0x02, 0xA79);           /* Return to WaitForKey state. */
270
        /* Select an open I/O location at 0x1*0 to do contention select. */
271
        for ( ; id_port < 0x200; id_port += 0x10) {
272
                if (check_region(id_port, 1))
273
                        continue;
274
                outb(0x00, id_port);
275
                outb(0xff, id_port);
276
                if (inb(id_port) & 0x01)
277
                        break;
278
        }
279
        if (id_port >= 0x200) {
280
                /* Rare -- do we really need a warning? */
281
                printk(" WARNING: No I/O port available for 3c509 activation.\n");
282
                return -ENODEV;
283
        }
284
        /* Next check for all ISA bus boards by sending the ID sequence to the
285
           ID_PORT.  We find cards past the first by setting the 'current_tag'
286
           on cards as they are found.  Cards with their tag set will not
287
           respond to subsequent ID sequences. */
288
 
289
        outb(0x00, id_port);
290
        outb(0x00, id_port);
291
        for(i = 0; i < 255; i++) {
292
                outb(lrs_state, id_port);
293
                lrs_state <<= 1;
294
                lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
295
        }
296
 
297
        /* For the first probe, clear all board's tag registers. */
298
        if (current_tag == 0)
299
                outb(0xd0, id_port);
300
        else                            /* Otherwise kill off already-found boards. */
301
                outb(0xd8, id_port);
302
 
303
        if (id_read_eeprom(7) != 0x6d50) {
304
                return -ENODEV;
305
        }
306
 
307
        /* Read in EEPROM data, which does contention-select.
308
           Only the lowest address board will stay "on-line".
309
           3Com got the byte order backwards. */
310
        for (i = 0; i < 3; i++) {
311
                phys_addr[i] = htons(id_read_eeprom(i));
312
        }
313
 
314
        {
315
                unsigned int iobase = id_read_eeprom(8);
316
                if_port = iobase >> 14;
317
                ioaddr = 0x200 + ((iobase & 0x1f) << 4);
318
        }
319
        irq = id_read_eeprom(9) >> 12;
320
 
321
        if (dev) {                                      /* Set passed-in IRQ or I/O Addr. */
322
                if (dev->irq > 1  &&  dev->irq < 16)
323
                        irq = dev->irq;
324
 
325
                if (dev->base_addr) {
326
                        if (dev->mem_end == 0x3c509                     /* Magic key */
327
                                && dev->base_addr >= 0x200  &&  dev->base_addr <= 0x3e0)
328
                                ioaddr = dev->base_addr & 0x3f0;
329
                        else if (dev->base_addr != ioaddr)
330
                                return -ENODEV;
331
                }
332
        }
333
 
334
        /* Set the adaptor tag so that the next card can be found. */
335
        outb(0xd0 + ++current_tag, id_port);
336
 
337
        /* Activate the adaptor at the EEPROM location. */
338
        outb((ioaddr >> 4) | 0xe0, id_port);
339
 
340
        EL3WINDOW(0);
341
        if (inw(ioaddr) != 0x6d50)
342
                return -ENODEV;
343
 
344
        /* Free the interrupt so that some other card can use it. */
345
        outw(0x0f00, ioaddr + WN0_IRQ);
346
 found:
347
        if (dev == NULL) {
348
                dev = init_etherdev(dev, sizeof(struct el3_private));
349
        }
350
        memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
351
        dev->base_addr = ioaddr;
352
        dev->irq = irq;
353
        dev->if_port = (dev->mem_start & 0x1f) ? dev->mem_start & 3 : if_port;
354
 
355
        request_region(dev->base_addr, EL3_IO_EXTENT, "3c509");
356
 
357
        {
358
                const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
359
                printk("%s: 3c509 at %#3.3lx tag %d, %s port, address ",
360
                           dev->name, dev->base_addr, current_tag, if_names[dev->if_port]);
361
        }
362
 
363
        /* Read in the station address. */
364
        for (i = 0; i < 6; i++)
365
                printk(" %2.2x", dev->dev_addr[i]);
366
        printk(", IRQ %d.\n", dev->irq);
367
 
368
        /* Make up a EL3-specific-data structure. */
369
        if (dev->priv == NULL)
370
                dev->priv = kmalloc(sizeof(struct el3_private), GFP_KERNEL);
371
        if (dev->priv == NULL)
372
                return -ENOMEM;
373
        memset(dev->priv, 0, sizeof(struct el3_private));
374
 
375
        ((struct el3_private *)dev->priv)->mca_slot = mca_slot;
376
        ((struct el3_private *)dev->priv)->next_dev = el3_root_dev;
377
        el3_root_dev = dev;
378
 
379
        if (el3_debug > 0)
380
                printk(version);
381
 
382
        /* The EL3-specific entries in the device structure. */
383
        dev->open = &el3_open;
384
        dev->hard_start_xmit = &el3_start_xmit;
385
        dev->stop = &el3_close;
386
        dev->get_stats = &el3_get_stats;
387
        dev->set_multicast_list = &set_multicast_list;
388
 
389
        /* Fill in the generic fields of the device structure. */
390
        ether_setup(dev);
391
        return 0;
392
}
393
 
394
/* Read a word from the EEPROM using the regular EEPROM access register.
395
   Assume that we are in register window zero.
396
 */
397
static ushort read_eeprom(int ioaddr, int index)
398
{
399
        outw(EEPROM_READ + index, ioaddr + 10);
400
        /* Pause for at least 162 us. for the read to take place. */
401
        udelay (500);
402
        return inw(ioaddr + 12);
403
}
404
 
405
/* Read a word from the EEPROM when in the ISA ID probe state. */
406
static ushort id_read_eeprom(int index)
407
{
408
        int bit, word = 0;
409
 
410
        /* Issue read command, and pause for at least 162 us. for it to complete.
411
           Assume extra-fast 16Mhz bus. */
412
        outb(EEPROM_READ + index, id_port);
413
 
414
        /* Pause for at least 162 us. for the read to take place. */
415
        udelay (500);
416
 
417
        for (bit = 15; bit >= 0; bit--)
418
                word = (word << 1) + (inb(id_port) & 0x01);
419
 
420
        if (el3_debug > 3)
421
                printk("  3c509 EEPROM word %d %#4.4x.\n", index, word);
422
 
423
        return word;
424
}
425
 
426
 
427
static int
428
el3_open(struct device *dev)
429
{
430
        int ioaddr = dev->base_addr;
431
        int i;
432
 
433
        outw(TxReset, ioaddr + EL3_CMD);
434
        outw(RxReset, ioaddr + EL3_CMD);
435
        outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
436
 
437
        /* Set the spinlock before grabbing IRQ! */
438
        ((struct el3_private *)dev->priv)->lock = (spinlock_t) SPIN_LOCK_UNLOCKED;
439
 
440
        if (request_irq(dev->irq, &el3_interrupt, 0, dev->name, dev)) {
441
                return -EAGAIN;
442
        }
443
 
444
        EL3WINDOW(0);
445
        if (el3_debug > 3)
446
                printk("%s: Opening, IRQ %d      status@%x %4.4x.\n", dev->name,
447
                           dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
448
 
449
        /* Activate board: this is probably unnecessary. */
450
        outw(0x0001, ioaddr + 4);
451
 
452
        /* Set the IRQ line. */
453
        outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
454
 
455
        /* Set the station address in window 2 each time opened. */
456
        EL3WINDOW(2);
457
 
458
        for (i = 0; i < 6; i++)
459
                outb(dev->dev_addr[i], ioaddr + i);
460
 
461
        if (dev->if_port == 3)
462
                /* Start the thinnet transceiver. We should really wait 50ms...*/
463
                outw(StartCoax, ioaddr + EL3_CMD);
464
        else if (dev->if_port == 0) {
465
                /* 10baseT interface, enabled link beat and jabber check. */
466
                EL3WINDOW(4);
467
                outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
468
        }
469
 
470
        /* Switch to the stats window, and clear all stats by reading. */
471
        outw(StatsDisable, ioaddr + EL3_CMD);
472
        EL3WINDOW(6);
473
        for (i = 0; i < 9; i++)
474
                inb(ioaddr + i);
475
        inw(ioaddr + 10);
476
        inw(ioaddr + 12);
477
 
478
        /* Switch to register set 1 for normal use. */
479
        EL3WINDOW(1);
480
 
481
        /* Accept b-case and phys addr only. */
482
        outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
483
        outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
484
 
485
        dev->interrupt = 0;
486
        dev->tbusy = 0;
487
        dev->start = 1;
488
 
489
        outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
490
        outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
491
        /* Allow status bits to be seen. */
492
        outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
493
        /* Ack all pending events, and set active indicator mask. */
494
        outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
495
                 ioaddr + EL3_CMD);
496
        outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull,
497
                 ioaddr + EL3_CMD);
498
 
499
        if (el3_debug > 3)
500
                printk("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
501
                           dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
502
 
503
        MOD_INC_USE_COUNT;
504
        return 0;                                       /* Always succeed */
505
}
506
 
507
static int
508
el3_start_xmit(struct sk_buff *skb, struct device *dev)
509
{
510
        struct el3_private *lp = (struct el3_private *)dev->priv;
511
        int ioaddr = dev->base_addr;
512
 
513
        /* Transmitter timeout, serious problems. */
514
        if (dev->tbusy) {
515
                int tickssofar = jiffies - dev->trans_start;
516
                if (tickssofar < TX_TIMEOUT)
517
                        return 1;
518
                printk("%s: transmit timed out, Tx_status %2.2x status %4.4x "
519
                           "Tx FIFO room %d.\n",
520
                           dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
521
                           inw(ioaddr + TX_FREE));
522
                lp->stats.tx_errors++;
523
                dev->trans_start = jiffies;
524
                /* Issue TX_RESET and TX_START commands. */
525
                outw(TxReset, ioaddr + EL3_CMD);
526
                outw(TxEnable, ioaddr + EL3_CMD);
527
                dev->tbusy = 0;
528
        }
529
 
530
        lp->stats.tx_bytes += skb->len;
531
 
532
        if (el3_debug > 4) {
533
                printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
534
                           dev->name, skb->len, inw(ioaddr + EL3_STATUS));
535
        }
536
#if 0
537
#ifndef final_version
538
        {       /* Error-checking code, delete someday. */
539
                ushort status = inw(ioaddr + EL3_STATUS);
540
                if (status & 0x0001             /* IRQ line active, missed one. */
541
                        && inw(ioaddr + EL3_STATUS) & 1) {                      /* Make sure. */
542
                        printk("%s: Missed interrupt, status then %04x now %04x"
543
                                   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,
544
                                   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
545
                                   inw(ioaddr + RX_STATUS));
546
                        /* Fake interrupt trigger by masking, acknowledge interrupts. */
547
                        outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
548
                        outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
549
                                 ioaddr + EL3_CMD);
550
                        outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
551
                }
552
        }
553
#endif
554
#endif
555
        /* Avoid timer-based retransmission conflicts. */
556
        if (test_and_set_bit(0, (void*)&dev->tbusy) != 0)
557
                printk("%s: Transmitter access conflict.\n", dev->name);
558
        else {
559
                /*
560
                 *      We lock the driver against other processors. Note
561
                 *      we don't need to lock versus the IRQ as we suspended
562
                 *      that. This means that we lose the ability to take
563
                 *      an RX during a TX upload. That sucks a bit with SMP
564
                 *      on an original 3c509 (2K buffer)
565
                 *
566
                 *      Using disable_irq stops us crapping on other
567
                 *      time sensitive devices.
568
                 */
569
 
570
#ifdef __SMP__
571
                disable_irq_nosync(dev->irq);
572
                spin_lock(&lp->lock);
573
#endif          
574
 
575
                /* Put out the doubleword header... */
576
                outw(skb->len, ioaddr + TX_FIFO);
577
                outw(0x00, ioaddr + TX_FIFO);
578
                /* ... and the packet rounded to a doubleword. */
579
#ifdef  __powerpc__
580
                outsl_unswapped(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
581
#else
582
                outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
583
#endif
584
 
585
                dev->trans_start = jiffies;
586
                if (inw(ioaddr + TX_FREE) > 1536) {
587
                        dev->tbusy = 0;
588
                } else
589
                        /* Interrupt us when the FIFO has room for max-sized packet. */
590
                        outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
591
#ifdef __SMP__
592
                spin_unlock(&lp->lock);
593
                enable_irq(dev->irq);
594
#endif          
595
        }
596
 
597
        dev_kfree_skb (skb);
598
 
599
        /* Clear the Tx status stack. */
600
        {
601
                short tx_status;
602
                int i = 4;
603
 
604
                while (--i > 0  &&      (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
605
                        if (tx_status & 0x38) lp->stats.tx_aborted_errors++;
606
                        if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
607
                        if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
608
                        outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
609
                }
610
        }
611
        return 0;
612
}
613
 
614
/* The EL3 interrupt handler. */
615
static void
616
el3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
617
{
618
        struct device *dev = (struct device *)dev_id;
619
        struct el3_private *lp;
620
        int ioaddr, status;
621
        int i = max_interrupt_work;
622
 
623
        if (dev == NULL) {
624
                printk ("el3_interrupt(): irq %d for unknown device.\n", irq);
625
                return;
626
        }
627
 
628
        lp = (struct el3_private *)dev->priv;
629
        spin_lock(&lp->lock);
630
 
631
        if (dev->interrupt)
632
                printk("%s: Re-entering the interrupt handler.\n", dev->name);
633
        dev->interrupt = 1;
634
 
635
        ioaddr = dev->base_addr;
636
 
637
        if (el3_debug > 4) {
638
                status = inw(ioaddr + EL3_STATUS);
639
                printk("%s: interrupt, status %4.4x.\n", dev->name, status);
640
        }
641
 
642
        while ((status = inw(ioaddr + EL3_STATUS)) &
643
                   (IntLatch | RxComplete | StatsFull)) {
644
 
645
                if (status & RxComplete)
646
                        el3_rx(dev);
647
 
648
                if (status & TxAvailable) {
649
                        if (el3_debug > 5)
650
                                printk("        TX room bit was handled.\n");
651
                        /* There's room in the FIFO for a full-sized packet. */
652
                        outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
653
                        dev->tbusy = 0;
654
                        mark_bh(NET_BH);
655
                }
656
                if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) {
657
                        /* Handle all uncommon interrupts. */
658
                        if (status & StatsFull)                         /* Empty statistics. */
659
                                update_stats(dev);
660
                        if (status & RxEarly) {                         /* Rx early is unused. */
661
                                el3_rx(dev);
662
                                outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
663
                        }
664
                        if (status & TxComplete) {                      /* Really Tx error. */
665
                                struct el3_private *lp = (struct el3_private *)dev->priv;
666
                                short tx_status;
667
                                int i = 4;
668
 
669
                                while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
670
                                        if (tx_status & 0x38) lp->stats.tx_aborted_errors++;
671
                                        if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
672
                                        if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
673
                                        outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
674
                                }
675
                        }
676
                        if (status & AdapterFailure) {
677
                                /* Adapter failure requires Rx reset and reinit. */
678
                                outw(RxReset, ioaddr + EL3_CMD);
679
                                /* Set the Rx filter to the current state. */
680
                                outw(SetRxFilter | RxStation | RxBroadcast
681
                                         | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0)
682
                                         | (dev->flags & IFF_PROMISC ? RxProm : 0),
683
                                         ioaddr + EL3_CMD);
684
                                outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
685
                                outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
686
                        }
687
                }
688
 
689
                if (--i < 0) {
690
                        printk("%s: Infinite loop in interrupt, status %4.4x.\n",
691
                                   dev->name, status);
692
                        /* Clear all interrupts. */
693
                        outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
694
                        break;
695
                }
696
                /* Acknowledge the IRQ. */
697
                outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */
698
        }
699
 
700
        if (el3_debug > 4) {
701
                printk("%s: exiting interrupt, status %4.4x.\n", dev->name,
702
                           inw(ioaddr + EL3_STATUS));
703
        }
704
        spin_unlock(&lp->lock);
705
        dev->interrupt = 0;
706
        return;
707
}
708
 
709
 
710
static struct enet_statistics *
711
el3_get_stats(struct device *dev)
712
{
713
        struct el3_private *lp = (struct el3_private *)dev->priv;
714
        unsigned long flags;
715
 
716
        /*
717
         *      This is fast enough not to bother with disable IRQ
718
         *      stuff.
719
         */
720
 
721
        spin_lock_irqsave(&lp->lock, flags);
722
        update_stats(dev);
723
        spin_unlock_irqrestore(&lp->lock, flags);
724
        return &lp->stats;
725
}
726
 
727
/*  Update statistics.  We change to register window 6, so this should be run
728
        single-threaded if the device is active. This is expected to be a rare
729
        operation, and it's simpler for the rest of the driver to assume that
730
        window 1 is always valid rather than use a special window-state variable.
731
        */
732
static void update_stats(struct device *dev)
733
{
734
        struct el3_private *lp = (struct el3_private *)dev->priv;
735
        int ioaddr = dev->base_addr;
736
 
737
        if (el3_debug > 5)
738
                printk("   Updating the statistics.\n");
739
        /* Turn off statistics updates while reading. */
740
        outw(StatsDisable, ioaddr + EL3_CMD);
741
        /* Switch to the stats window, and read everything. */
742
        EL3WINDOW(6);
743
        lp->stats.tx_carrier_errors     += inb(ioaddr + 0);
744
        lp->stats.tx_heartbeat_errors   += inb(ioaddr + 1);
745
        /* Multiple collisions. */         inb(ioaddr + 2);
746
        lp->stats.collisions            += inb(ioaddr + 3);
747
        lp->stats.tx_window_errors      += inb(ioaddr + 4);
748
        lp->stats.rx_fifo_errors        += inb(ioaddr + 5);
749
        lp->stats.tx_packets            += inb(ioaddr + 6);
750
        /* Rx packets   */                 inb(ioaddr + 7);
751
        /* Tx deferrals */                 inb(ioaddr + 8);
752
        inw(ioaddr + 10);       /* Total Rx and Tx octets. */
753
        inw(ioaddr + 12);
754
 
755
        /* Back to window 1, and turn statistics back on. */
756
        EL3WINDOW(1);
757
        outw(StatsEnable, ioaddr + EL3_CMD);
758
        return;
759
}
760
 
761
static int
762
el3_rx(struct device *dev)
763
{
764
        struct el3_private *lp = (struct el3_private *)dev->priv;
765
        int ioaddr = dev->base_addr;
766
        short rx_status;
767
 
768
        if (el3_debug > 5)
769
                printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
770
                           inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
771
        while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
772
                if (rx_status & 0x4000) { /* Error, update stats. */
773
                        short error = rx_status & 0x3800;
774
 
775
                        outw(RxDiscard, ioaddr + EL3_CMD);
776
                        lp->stats.rx_errors++;
777
                        switch (error) {
778
                        case 0x0000:            lp->stats.rx_over_errors++; break;
779
                        case 0x0800:            lp->stats.rx_length_errors++; break;
780
                        case 0x1000:            lp->stats.rx_frame_errors++; break;
781
                        case 0x1800:            lp->stats.rx_length_errors++; break;
782
                        case 0x2000:            lp->stats.rx_frame_errors++; break;
783
                        case 0x2800:            lp->stats.rx_crc_errors++; break;
784
                        }
785
                } else {
786
                        short pkt_len = rx_status & 0x7ff;
787
                        struct sk_buff *skb;
788
 
789
                        skb = dev_alloc_skb(pkt_len+5);
790
                        lp->stats.rx_bytes += pkt_len;
791
                        if (el3_debug > 4)
792
                                printk("Receiving packet size %d status %4.4x.\n",
793
                                           pkt_len, rx_status);
794
                        if (skb != NULL) {
795
                                skb->dev = dev;
796
                                skb_reserve(skb, 2);     /* Align IP on 16 byte */
797
 
798
                                /* 'skb->data' points to the start of sk_buff data area. */
799
#ifdef  __powerpc__
800
                                insl_unswapped(ioaddr+RX_FIFO, skb_put(skb,pkt_len),
801
                                                           (pkt_len + 3) >> 2);
802
#else
803
                                insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
804
                                         (pkt_len + 3) >> 2);
805
#endif
806
 
807
                                outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
808
                                skb->protocol = eth_type_trans(skb,dev);
809
                                netif_rx(skb);
810
                                lp->stats.rx_packets++;
811
                                continue;
812
                        }
813
                        outw(RxDiscard, ioaddr + EL3_CMD);
814
                        lp->stats.rx_dropped++;
815
                        if (el3_debug)
816
                                printk("%s: Couldn't allocate a sk_buff of size %d.\n",
817
                                           dev->name, pkt_len);
818
                }
819
                inw(ioaddr + EL3_STATUS);                               /* Delay. */
820
                while (inw(ioaddr + EL3_STATUS) & 0x1000)
821
                        printk(KERN_DEBUG "     Waiting for 3c509 to discard packet, status %x.\n",
822
                                   inw(ioaddr + EL3_STATUS) );
823
        }
824
 
825
        return 0;
826
}
827
 
828
/*
829
 *     Set or clear the multicast filter for this adaptor.
830
 */
831
static void
832
set_multicast_list(struct device *dev)
833
{
834
        unsigned long flags;
835
        struct el3_private *lp = (struct el3_private *)dev->priv;
836
        int ioaddr = dev->base_addr;
837
 
838
        if (el3_debug > 1) {
839
                static int old = 0;
840
                if (old != dev->mc_count) {
841
                        old = dev->mc_count;
842
                        printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
843
                }
844
        }
845
        spin_lock_irqsave(&lp->lock, flags);
846
        if (dev->flags&IFF_PROMISC) {
847
                outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
848
                         ioaddr + EL3_CMD);
849
        }
850
        else if (dev->mc_count || (dev->flags&IFF_ALLMULTI)) {
851
                outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
852
        }
853
        else
854
                outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
855
        spin_unlock_irqrestore(&lp->lock, flags);
856
}
857
 
858
static int
859
el3_close(struct device *dev)
860
{
861
        int ioaddr = dev->base_addr;
862
 
863
        if (el3_debug > 2)
864
                printk("%s: Shutting down ethercard.\n", dev->name);
865
 
866
        dev->tbusy = 1;
867
        dev->start = 0;
868
 
869
        /* Turn off statistics ASAP.  We update lp->stats below. */
870
        outw(StatsDisable, ioaddr + EL3_CMD);
871
 
872
        /* Disable the receiver and transmitter. */
873
        outw(RxDisable, ioaddr + EL3_CMD);
874
        outw(TxDisable, ioaddr + EL3_CMD);
875
 
876
        if (dev->if_port == 3)
877
                /* Turn off thinnet power.  Green! */
878
                outw(StopCoax, ioaddr + EL3_CMD);
879
        else if (dev->if_port == 0) {
880
                /* Disable link beat and jabber, if_port may change ere next open(). */
881
                EL3WINDOW(4);
882
                outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA);
883
        }
884
 
885
        free_irq(dev->irq, dev);
886
        /* Switching back to window 0 disables the IRQ. */
887
        EL3WINDOW(0);
888
        /* But we explicitly zero the IRQ line select anyway. */
889
        outw(0x0f00, ioaddr + WN0_IRQ);
890
 
891
        update_stats(dev);
892
        MOD_DEC_USE_COUNT;
893
        return 0;
894
}
895
 
896
#ifdef MODULE
897
/* Parameters that may be passed into the module. */
898
static int debug = -1;
899
static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
900
static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1};
901
 
902
MODULE_PARM(debug,"i");
903
MODULE_PARM(irq,"1-8i");
904
MODULE_PARM(xcvr,"1-8i");
905
 
906
int
907
init_module(void)
908
{
909
        int el3_cards = 0;
910
 
911
        if (debug >= 0)
912
                el3_debug = debug;
913
 
914
        el3_root_dev = NULL;
915
        while (el3_probe(0) == 0) {
916
                if (irq[el3_cards] > 1)
917
                        el3_root_dev->irq = irq[el3_cards];
918
                if (xcvr[el3_cards] >= 0)
919
                        el3_root_dev->if_port = xcvr[el3_cards];
920
                el3_cards++;
921
        }
922
 
923
        return el3_cards ? 0 : -ENODEV;
924
}
925
 
926
void
927
cleanup_module(void)
928
{
929
        struct device *next_dev;
930
 
931
        /* No need to check MOD_IN_USE, as sys_delete_module() checks. */
932
        while (el3_root_dev) {
933
                struct el3_private *lp = (struct el3_private *)el3_root_dev->priv;
934
#ifdef CONFIG_MCA               
935
                if(lp->mca_slot!=-1)
936
                        mca_mark_as_unused(lp->mca_slot);
937
#endif                  
938
                next_dev = lp->next_dev;
939
                unregister_netdev(el3_root_dev);
940
                release_region(el3_root_dev->base_addr, EL3_IO_EXTENT);
941
                kfree(el3_root_dev);
942
                el3_root_dev = next_dev;
943
        }
944
}
945
#endif /* MODULE */
946
 
947
/*
948
 * Local variables:
949
 *  compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c509.c"
950
 *  version-control: t
951
 *  kept-new-versions: 5
952
 *  tab-width: 4
953
 * End:
954
 */