WebSVN - shark - Blame - Rev 1059 - /shark/trunk/drivers/cpu/cpufreq/powernow-k8.c

Rev	Author	Line No.	Line
770	mauro	1	/*
		2	* (c) 2003, 2004 Advanced Micro Devices, Inc.
		3	* Your use of this code is subject to the terms and conditions of the
		4	* GNU general public license version 2. See "../../../COPYING" or
		5	* http://www.gnu.org/licenses/gpl.html
		6	*
		7	* Support : paul.devriendt@amd.com
		8	*
		9	* Based on the powernow-k7.c module written by Dave Jones.
		10	* (C) 2003 Dave Jones <davej@codemonkey.ork.uk> on behalf of SuSE Labs
		11	* Licensed under the terms of the GNU GPL License version 2.
		12	* Based upon datasheets & sample CPUs kindly provided by AMD.
		13	*
		14	* Valuable input gratefully received from Dave Jones, Pavel Machek, Dominik
		15	* Brodowski, and others.
		16	*
		17	* Processor information obtained from Chapter 9 (Power and Thermal Management)
		18	* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
		19	* Opteron Processors" available for download from www.amd.com
		20	*/
		21
		22	//#define DEBUG
		23
		24	#include <linux/kernel.h>
		25	#include <linux/smp.h>
		26	#include <linux/module.h>
		27	#include <linux/init.h>
		28	#include <linux/cpufreq.h>
		29	#include <linux/slab.h>
		30	#include <linux/string.h>
		31
		32	#include <asm/msr.h>
		33	#include <asm/io.h>
		34	#include <asm/delay.h>
		35
		36	#define PFX "powernow-k8: "
		37	#define VERSION "version 1.00.12 - February 29, 2004"
		38	#include "powernow-k8.h"
		39
		40	#ifdef DEBUG
		41	#define dprintk(msg...) printk(msg)
		42	#else
		43	#define dprintk(msg...) do { } while(0)
		44	#endif
		45
		46	static u32 vstable; /* voltage stabalization time, units 20 us */
		47	static u32 plllock; /* pll lock time, units 1 us */
		48	static u32 numps; /* number of p-states */
		49	static u32 batps; /* number of p-states supported on battery */
		50	static u32 rvo; /* ramp voltage offset */
		51	static u32 irt; /* isochronous relief time */
		52	static u32 vidmvs; /* usable value calculated from mvs */
		53	static u32 currvid; /* keep track of the current fid / vid */
		54	static u32 currfid;
		55	static struct cpufreq_frequency_table *ftbl;
		56
		57
		58	/* Return a frequency in MHz, given an input fid */
		59	static inline u32 find_freq_from_fid(u32 fid)
		60	{
		61	return 800 + (fid * 100);
		62	}
		63
		64	/* Return a frequency in KHz, given an input fid */
		65	static inline u32 find_khz_freq_from_fid(u32 fid)
		66	{
		67	return 1000 * (800 + (fid * 100));
		68	}
		69
		70	/* Return the vco fid for an input fid */
		71	static u32 convert_fid_to_vco_fid(u32 fid)
		72	{
		73	if (fid < HI_FID_TABLE_BOTTOM) {
		74	return 8 + (2 * fid);
		75	} else {
		76	return fid;
		77	}
		78	}
		79
		80	/*
		81	* Return 1 if the pending bit is set. Unless we just instructed the processor
		82	* to transition to a new state, seeing this bit set is really bad news.
		83	*/
		84	static inline int pending_bit_stuck(void)
		85	{
		86	u32 lo;
		87	u32 hi;
		88
		89	rdmsr(MSR_FIDVID_STATUS, lo, hi);
		90	return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
		91	}
		92
		93	/*
		94	* Update the global current fid / vid values from the status msr. Returns
		95	* 1 on error.
		96	*/
		97	static int query_current_values_with_pending_wait(void)
		98	{
		99	u32 lo;
		100	u32 hi;
		101	u32 i = 0;
		102
		103	lo = MSR_S_LO_CHANGE_PENDING;
		104	while (lo & MSR_S_LO_CHANGE_PENDING) {
		105	if (i++ > 0x1000000) {
		106	printk(KERN_ERR PFX "detected change pending stuck\n");
		107	return 1;
		108	}
		109	rdmsr(MSR_FIDVID_STATUS, lo, hi);
		110	}
		111
		112	currvid = hi & MSR_S_HI_CURRENT_VID;
		113	currfid = lo & MSR_S_LO_CURRENT_FID;
		114
		115	return 0;
		116	}
		117
		118	/* the isochronous relief time */
		119	static inline void count_off_irt(void)
		120	{
		121	udelay((1 << irt) * 10);
		122	return;
		123	}
		124
		125	/* the voltage stabalization time */
		126	static inline void count_off_vst(void)
		127	{
		128	udelay(vstable * VST_UNITS_20US);
		129	return;
		130	}
		131
		132	/* write the new fid value along with the other control fields to the msr */
		133	static int write_new_fid(u32 fid)
		134	{
		135	u32 lo;
		136	u32 savevid = currvid;
		137
		138	if ((fid & INVALID_FID_MASK) \|\| (currvid & INVALID_VID_MASK)) {
		139	dprintk(KERN_ERR PFX "internal error - overflow on fid write\n");
		140	return 1;
		141	}
		142
		143	lo = fid \| (currvid << MSR_C_LO_VID_SHIFT) \| MSR_C_LO_INIT_FID_VID;
		144	dprintk(KERN_DEBUG PFX "writing fid %x, lo %x, hi %x\n",
		145	fid, lo, plllock * PLL_LOCK_CONVERSION);
		146	wrmsr(MSR_FIDVID_CTL, lo, plllock * PLL_LOCK_CONVERSION);
		147	if (query_current_values_with_pending_wait())
		148	return 1;
		149	count_off_irt();
		150
		151	if (savevid != currvid) {
		152	dprintk(KERN_ERR PFX "vid change on fid trans, old %x, new %x\n",
		153	savevid, currvid);
		154	return 1;
		155	}
		156
		157	if (fid != currfid) {
		158	dprintk(KERN_ERR PFX "fid trans failed, fid %x, curr %x\n", fid,
		159	currfid);
		160	return 1;
		161	}
		162
		163	return 0;
		164	}
		165
		166	/* Write a new vid to the hardware */
		167	static int write_new_vid(u32 vid)
		168	{
		169	u32 lo;
		170	u32 savefid = currfid;
		171
		172	if ((currfid & INVALID_FID_MASK) \|\| (vid & INVALID_VID_MASK)) {
		173	dprintk(KERN_ERR PFX "internal error - overflow on vid write\n");
		174	return 1;
		175	}
		176
		177	lo = currfid \| (vid << MSR_C_LO_VID_SHIFT) \| MSR_C_LO_INIT_FID_VID;
		178	dprintk(KERN_DEBUG PFX "writing vid %x, lo %x, hi %x\n",
		179	vid, lo, STOP_GRANT_5NS);
		180	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
		181	if (query_current_values_with_pending_wait())
		182	return 1;
		183
		184	if (savefid != currfid) {
		185	dprintk(KERN_ERR PFX "fid changed on vid trans, old %x new %x\n",
		186	savefid, currfid);
		187	return 1;
		188	}
		189
		190	if (vid != currvid) {
		191	dprintk(KERN_ERR PFX "vid trans failed, vid %x, curr %x\n", vid,
		192	currvid);
		193	return 1;
		194	}
		195
		196	return 0;
		197	}
		198
		199	/*
		200	* Reduce the vid by the max of step or reqvid.
		201	* Decreasing vid codes represent increasing voltages :
		202	* vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
		203	*/
		204	static int decrease_vid_code_by_step(u32 reqvid, u32 step)
		205	{
		206	if ((currvid - reqvid) > step)
		207	reqvid = currvid - step;
		208	if (write_new_vid(reqvid))
		209	return 1;
		210	count_off_vst();
		211	return 0;
		212	}
		213
		214	/* Change the fid and vid, by the 3 phases. */
1059	tullio	215	//static inline int transition_fid_vid(u32 reqfid, u32 reqvid)
		216	static int transition_fid_vid(u32 reqfid, u32 reqvid)
770	mauro	217	{
		218	if (core_voltage_pre_transition(reqvid))
		219	return 1;
		220	if (core_frequency_transition(reqfid))
		221	return 1;
		222	if (core_voltage_post_transition(reqvid))
		223	return 1;
		224	if (query_current_values_with_pending_wait())
		225	return 1;
		226
		227	if ((reqfid != currfid) \|\| (reqvid != currvid)) {
		228	dprintk(KERN_ERR PFX "failed: req %x %x, curr %x %x\n",
		229	reqfid, reqvid, currfid, currvid);
		230	return 1;
		231	}
		232
		233	dprintk(KERN_INFO PFX
		234	"transitioned: new fid %x, vid %x\n", currfid, currvid);
		235	return 0;
		236	}
		237
		238	/* Phase 1 - core voltage transition ... setup voltage */
1059	tullio	239	//static inline int core_voltage_pre_transition(u32 reqvid)
		240	static int core_voltage_pre_transition(u32 reqvid)
770	mauro	241	{
		242	u32 rvosteps = rvo;
		243	u32 savefid = currfid;
		244
		245	dprintk(KERN_DEBUG PFX
		246	"ph1: start, currfid %x, currvid %x, reqvid %x, rvo %x\n",
		247	currfid, currvid, reqvid, rvo);
		248
		249	while (currvid > reqvid) {
		250	dprintk(KERN_DEBUG PFX "ph1: curr %x, req vid %x\n",
		251	currvid, reqvid);
		252	if (decrease_vid_code_by_step(reqvid, vidmvs))
		253	return 1;
		254	}
		255
		256	while (rvosteps > 0) {
		257	if (currvid == 0) {
		258	rvosteps = 0;
		259	} else {
		260	dprintk(KERN_DEBUG PFX
		261	"ph1: changing vid for rvo, req %x\n",
		262	currvid - 1);
		263	if (decrease_vid_code_by_step(currvid - 1, 1))
		264	return 1;
		265	rvosteps--;
		266	}
		267	}
		268
		269	if (query_current_values_with_pending_wait())
		270	return 1;
		271
		272	if (savefid != currfid) {
		273	dprintk(KERN_ERR PFX "ph1: err, currfid changed %x\n", currfid);
		274	return 1;
		275	}
		276
		277	dprintk(KERN_DEBUG PFX "ph1: complete, currfid %x, currvid %x\n",
		278	currfid, currvid);
		279
		280	return 0;
		281	}
		282
		283	/* Phase 2 - core frequency transition */
		284	static inline int core_frequency_transition(u32 reqfid)
		285	{
		286	u32 vcoreqfid;
		287	u32 vcocurrfid;
		288	u32 vcofiddiff;
		289	u32 savevid = currvid;
		290
		291	if ((reqfid < HI_FID_TABLE_BOTTOM) && (currfid < HI_FID_TABLE_BOTTOM)) {
		292	dprintk(KERN_ERR PFX "ph2: illegal lo-lo transition %x %x\n",
		293	reqfid, currfid);
		294	return 1;
		295	}
		296
		297	if (currfid == reqfid) {
		298	dprintk(KERN_ERR PFX "ph2: null fid transition %x\n", currfid);
		299	return 0;
		300	}
		301
		302	dprintk(KERN_DEBUG PFX
		303	"ph2: starting, currfid %x, currvid %x, reqfid %x\n",
		304	currfid, currvid, reqfid);
		305
		306	vcoreqfid = convert_fid_to_vco_fid(reqfid);
		307	vcocurrfid = convert_fid_to_vco_fid(currfid);
		308	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
		309	: vcoreqfid - vcocurrfid;
		310
		311	while (vcofiddiff > 2) {
		312	if (reqfid > currfid) {
		313	if (currfid > LO_FID_TABLE_TOP) {
		314	if (write_new_fid(currfid + 2)) {
		315	return 1;
		316	}
		317	} else {
		318	if (write_new_fid
		319	(2 + convert_fid_to_vco_fid(currfid))) {
		320	return 1;
		321	}
		322	}
		323	} else {
		324	if (write_new_fid(currfid - 2))
		325	return 1;
		326	}
		327
		328	vcocurrfid = convert_fid_to_vco_fid(currfid);
		329	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
		330	: vcoreqfid - vcocurrfid;
		331	}
		332
		333	if (write_new_fid(reqfid))
		334	return 1;
		335	if (query_current_values_with_pending_wait())
		336	return 1;
		337
		338	if (currfid != reqfid) {
		339	dprintk(KERN_ERR PFX
		340	"ph2: mismatch, failed fid trans, curr %x, req %x\n",
		341	currfid, reqfid);
		342	return 1;
		343	}
		344
		345	if (savevid != currvid) {
		346	dprintk(KERN_ERR PFX "ph2: vid changed, save %x, curr %x\n",
		347	savevid, currvid);
		348	return 1;
		349	}
		350
		351	dprintk(KERN_DEBUG PFX "ph2: complete, currfid %x, currvid %x\n",
		352	currfid, currvid);
		353
		354	return 0;
		355	}
		356
		357	/* Phase 3 - core voltage transition flow ... jump to the final vid. */
		358	static inline int core_voltage_post_transition(u32 reqvid)
		359	{
		360	u32 savefid = currfid;
		361	u32 savereqvid = reqvid;
		362
		363	dprintk(KERN_DEBUG PFX "ph3: starting, currfid %x, currvid %x\n",
		364	currfid, currvid);
		365
		366	if (reqvid != currvid) {
		367	if (write_new_vid(reqvid))
		368	return 1;
		369
		370	if (savefid != currfid) {
		371	dprintk(KERN_ERR PFX
		372	"ph3: bad fid change, save %x, curr %x\n",
		373	savefid, currfid);
		374	return 1;
		375	}
		376
		377	if (currvid != reqvid) {
		378	dprintk(KERN_ERR PFX
		379	"ph3: failed vid transition\n, req %x, curr %x",
		380	reqvid, currvid);
		381	return 1;
		382	}
		383	}
		384
		385	if (query_current_values_with_pending_wait())
		386	return 1;
		387
		388	if (savereqvid != currvid) {
		389	dprintk(KERN_ERR PFX "ph3: failed, currvid %x\n", currvid);
		390	return 1;
		391	}
		392
		393	if (savefid != currfid) {
		394	dprintk(KERN_ERR PFX "ph3: failed, currfid changed %x\n",
		395	currfid);
		396	return 1;
		397	}
		398
		399	dprintk(KERN_DEBUG PFX "ph3: complete, currfid %x, currvid %x\n",
		400	currfid, currvid);
		401	return 0;
		402	}
		403
		404	static inline int check_supported_cpu(void)
		405	{
		406	struct cpuinfo_x86 *c = &new_cpu_data;
		407	u32 eax, ebx, ecx, edx;
		408
		409	if (num_online_cpus() != 1) {
		410	dprintk(KERN_INFO PFX "multiprocessor systems not supported\n");
		411	return 0;
		412	}
		413
		414	if (c->x86_vendor != X86_VENDOR_AMD)
		415	return 0;
		416
		417	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
		418	if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) \|\|
		419	((eax & CPUID_XFAM) != CPUID_XFAM_K8) \|\|
		420	((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
		421	dprintk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
		422	return 0;
		423	} else {
		424	dprintk(KERN_INFO PFX "AMD Athlon 64 or AMD Opteron processor found\n");
		425	}
		426
		427	eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
		428	if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
		429	dprintk(KERN_INFO PFX "No freq change capabilities\n");
		430	return 0;
		431	}
		432
		433	cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
		434	if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
		435	dprintk(KERN_INFO PFX "Power state transitions not supported\n");
		436	return 0;
		437	}
		438
		439	dprintk(KERN_INFO PFX "Found AMD Athlon 64 / Opteron processor\n");
		440	return 1;
		441	}
		442
		443	static int check_pst_table(struct pst_s *pst, u8 maxvid)
		444	{
		445	unsigned int j;
		446	u8 lastfid = 0xff;
		447
		448	for (j = 0; j < numps; j++) {
		449	if (pst[j].vid > LEAST_VID) {
		450	dprintk(KERN_ERR PFX "vid %d bad: %x\n", j, pst[j].vid);
		451	return -EINVAL;
		452	}
		453	if (pst[j].vid < rvo) { /* vid + rvo >= 0 */
		454	dprintk(KERN_ERR PFX "0 vid exceeded with pst %d\n", j);
		455	return -ENODEV;
		456	}
		457	if (pst[j].vid < maxvid + rvo) { /* vid + rvo >= maxvid */
		458	dprintk(KERN_ERR PFX "maxvid exceeded with pst %d\n", j);
		459	return -ENODEV;
		460	}
		461	if ((pst[j].fid > MAX_FID)
		462	\|\| (pst[j].fid & 1)
		463	\|\| (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
		464	dprintk(KERN_ERR PFX "fid %d bad: %x\n", j, pst[j].fid);
		465	return -EINVAL;
		466	}
		467	if (pst[j].fid < lastfid)
		468	lastfid = pst[j].fid;
		469	}
		470	if (lastfid & 1) {
		471	dprintk(KERN_ERR PFX "lastfid invalid\n");
		472	return -EINVAL;
		473	}
		474	if (lastfid > LO_FID_TABLE_TOP)
		475	dprintk(KERN_INFO PFX "first fid not from lo freq table\n");
		476
		477	return 0;
		478	}
		479
		480	/* Find and validate the PSB/PST table in BIOS. */
		481	static inline int find_psb_table(void)
		482	{
		483	struct psb_s *psb;
		484	struct pst_s *pst;
		485	unsigned int i, j;
		486	u32 mvs;
		487	u8 maxvid;
		488
		489	for (i = 0xc0000; i < 0xffff0; i += 0x10) {
		490	/* Scan BIOS looking for the signature. */
		491	/* It can not be at ffff0 - it is too big. */
		492
		493	psb = phys_to_virt(i);
		494	if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
		495	continue;
		496
		497	dprintk(KERN_DEBUG PFX "found PSB header at %p\n", psb);
		498	dprintk(KERN_DEBUG PFX "table version: %x\n",
		499	psb->tableversion);
		500	if (psb->tableversion != PSB_VERSION_1_4) {
		501	dprintk(KERN_INFO PFX "PSB table is not v1.4\n");
		502	return -ENODEV;
		503	}
		504
		505	dprintk(KERN_DEBUG PFX "flags: %x\n", psb->flags1);
		506	if (psb->flags1) {
		507	dprintk(KERN_ERR PFX "unknown flags\n");
		508	return -ENODEV;
		509	}
		510
		511	vstable = psb->voltagestabilizationtime;
		512	dprintk(KERN_INFO PFX "voltage stabilization time: %d(*20us)\n",
		513	vstable);
		514
		515	dprintk(KERN_DEBUG PFX "flags2: %x\n", psb->flags2);
		516	rvo = psb->flags2 & 3;
		517	irt = ((psb->flags2) >> 2) & 3;
		518	mvs = ((psb->flags2) >> 4) & 3;
		519	vidmvs = 1 << mvs;
		520	batps = ((psb->flags2) >> 6) & 3;
		521	if (batps)
		522	dprintk(KERN_INFO PFX "only %d pstates on battery\n",
		523	batps );
		524
		525	dprintk(KERN_INFO PFX "ramp voltage offset: %d\n", rvo);
		526	dprintk(KERN_INFO PFX "isochronous relief time: %d\n", irt);
		527	dprintk(KERN_INFO PFX "maximum voltage step: %d - %x\n",
		528	mvs, vidmvs);
		529
		530	if (psb->numpst != 1) {
		531	dprintk(KERN_ERR PFX "numpst must be 1\n");
		532	return -ENODEV;
		533	}
		534
		535	plllock = psb->plllocktime;
		536	dprintk(KERN_INFO PFX "plllocktime: %x (units 1us)\n",
		537	psb->plllocktime);
		538	dprintk(KERN_INFO PFX "maxfid: %x\n", psb->maxfid);
		539	dprintk(KERN_INFO PFX "maxvid: %x\n", psb->maxvid);
		540	maxvid = psb->maxvid;
		541
		542	numps = psb->numpstates;
		543	dprintk(KERN_INFO PFX "numpstates: %x\n", numps);
		544	if (numps < 2) {
		545	dprintk(KERN_ERR PFX "no p states to transition\n");
		546	return -ENODEV;
		547	}
		548
		549	pst = (struct pst_s *)(psb + 1);
		550	if (check_pst_table(pst, maxvid))
		551	return -EINVAL;
		552
		553	ftbl = kmalloc((sizeof(struct cpufreq_frequency_table)
		554	* (numps + 1)), GFP_KERNEL);
		555	if (!ftbl) {
		556	dprintk(KERN_ERR PFX "ftbl memory alloc failure\n");
		557	return -ENOMEM;
		558	}
		559
		560	for (j = 0; j < numps; j++) {
		561	dprintk(KERN_INFO PFX " %d : fid %x, vid %x\n", j,
		562	pst[j].fid, pst[j].vid);
		563
		564	ftbl[j].index = pst[j].fid; /* lower 8 bits */
		565	ftbl[j].index \|= (pst[j].vid << 8); /* upper 8 bits */
		566	ftbl[j].frequency = find_khz_freq_from_fid(pst[j].fid);
		567	}
		568	ftbl[numps].frequency = CPUFREQ_TABLE_END;
		569	ftbl[numps].index = 0;
		570
		571	if (query_current_values_with_pending_wait()) {
		572	kfree(ftbl);
		573	return 1;
		574	}
		575	dprintk(KERN_INFO PFX "cfid %x, cvid %x\n", currfid, currvid);
		576
		577	for (j = 0; j < numps; j++)
		578	if ((pst[j].fid == currfid) && (pst[j].vid == currvid))
		579	return (0);
		580	dprintk(KERN_ERR PFX "currfid/vid do not match PST, ignoring\n");
		581	return 0;
		582	}
		583
		584	dprintk(KERN_ERR PFX "BIOS error - no PSB\n");
		585
		586	#if 0
		587	/* hack for machines without a PSB - hardcode 2.0/1.8/0.8 GHz */
		588	/* use this hack at your own risk */
		589	vstable = 5;
		590	rvo = 2;
		591	irt = 2;
		592	mvs = 1;
		593	vidmvs = 1 << mvs;
		594	batps = numps = 3;
		595	plllock = 2;
		596
		597	ftbl = kmalloc((sizeof(struct cpufreq_frequency_table)
		598	* (numps + 1)), GFP_KERNEL);
		599	if (!ftbl)
		600	return -ENOMEM;
		601
		602	ftbl[0].index = 0x00; /* 800 MHz */
		603	ftbl[0].index \|= 0x12 << 8; /* 1.100v */
		604
		605	ftbl[0].frequency = find_khz_freq_from_fid( ftbl[0].index & 0x0f );
		606
		607	ftbl[1].index = 0x0a; /* 1.8 GHz */
		608	ftbl[1].index \|= 0x03 << 8; /* 1.475v */
		609
		610	ftbl[1].frequency = find_khz_freq_from_fid( ftbl[1].index & 0x0f );
		611
		612	ftbl[2].index = 0x0c; /* 2.0 GHz */
		613	ftbl[2].index \|= 0x02 << 8; /* 1.500v */
		614
		615	ftbl[2].frequency = find_khz_freq_from_fid( ftbl[2].index & 0x0f );
		616
		617	ftbl[numps].frequency = CPUFREQ_TABLE_END;
		618	ftbl[numps].index = 0;
		619
		620	if (query_current_values_with_pending_wait()) {
		621	kfree(ftbl);
		622	return 1;
		623	}
		624	dprintk(KERN_INFO PFX "currfid %x, currvid %x\n",
		625	currfid, currvid);
		626
		627	return 0;
		628	#endif
		629
		630	return -ENODEV;
		631	}
		632
		633	/* Take a frequency, and issue the fid/vid transition command */
		634	static inline int transition_frequency(unsigned int index)
		635	{
		636	u32 fid;
		637	u32 vid;
		638	int res;
		639	struct cpufreq_freqs freqs;
		640
		641	dprintk(KERN_DEBUG PFX "transition to index %u\n", index );
		642
		643	/* fid are the lower 8 bits of the index we stored into
		644	* the cpufreq frequency table in find_psb_table, vid are
		645	* the upper 8 bits.
		646	*/
		647
		648	fid = ftbl[index].index & 0xFF;
		649	vid = (ftbl[index].index & 0xFF00) >> 8;
		650
		651	dprintk(KERN_DEBUG PFX "matched fid %x, giving vid %x\n", fid, vid);
		652
		653	if (query_current_values_with_pending_wait())
		654	return 1;
		655
		656	if ((currvid == vid) && (currfid == fid)) {
		657	dprintk(KERN_DEBUG PFX "target matches curr (fid %x, vid %x)\n",
		658	fid, vid);
		659	return 0;
		660	}
		661
		662	if ((fid < HI_FID_TABLE_BOTTOM) && (currfid < HI_FID_TABLE_BOTTOM)) {
		663	dprintk(KERN_ERR PFX
		664	"ignoring illegal change in lo freq table-%x to %x\n",
		665	currfid, fid);
		666	return 1;
		667	}
		668
		669	dprintk(KERN_DEBUG PFX "changing to fid %x, vid %x\n", fid, vid);
		670
		671	freqs.cpu = 0; /* only true because SMP not supported */
		672	freqs.old = find_freq_from_fid(currfid);
		673	freqs.new = find_freq_from_fid(fid);
		674	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
		675
		676	res = transition_fid_vid(fid, vid);
		677
		678	freqs.new = find_freq_from_fid(currfid);
		679	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
		680
		681	return res;
		682	}
		683
		684	/* Driver entry point to switch to the target frequency */
		685	static int
		686	drv_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
		687	{
		688	u32 checkfid = currfid;
		689	u32 checkvid = currvid;
		690	unsigned int newstate;
		691
		692	if (pending_bit_stuck()) {
		693	dprintk(KERN_ERR PFX "failing targ, change pending bit set\n");
		694	return -EIO;
		695	}
		696
		697	dprintk(KERN_DEBUG PFX "targ: %d kHz, min %d, max %d, relation %d\n",
		698	targfreq, pol->min, pol->max, relation);
		699
		700	if (query_current_values_with_pending_wait())
		701	return -EIO;
		702	dprintk(KERN_DEBUG PFX "targ: curr fid %x, vid %x\n",
		703	currfid, currvid);
		704
		705	if ((checkvid != currvid) \|\| (checkfid != currfid)) {
		706	dprintk(KERN_ERR PFX "out of sync, fid %x %x, vid %x %x\n",
		707	checkfid, currfid, checkvid, currvid);
		708	}
		709
		710	if (cpufreq_frequency_table_target(pol, ftbl, targfreq, relation,
		711	&newstate))
		712	return -EINVAL;
		713
		714	if (transition_frequency(newstate))
		715	{
		716	dprintk(KERN_ERR PFX "transition frequency failed\n");
		717	return 1;
		718	}
		719
		720	pol->cur = find_khz_freq_from_fid(currfid);
		721	return 0;
		722	}
		723
		724	/* Driver entry point to verify the policy and range of frequencies */
		725	static int drv_verify(struct cpufreq_policy *pol)
		726	{
		727	if (pending_bit_stuck()) {
		728	dprintk(KERN_ERR PFX "failing verify, change pending bit set\n");
		729	return -EIO;
		730	}
		731
		732	return cpufreq_frequency_table_verify(pol, ftbl);
		733	}
		734
		735	/* per CPU init entry point to the driver */
		736	static int __init
		737	drv_cpu_init(struct cpufreq_policy *pol)
		738	{
		739	if (pol->cpu != 0) {
		740	dprintk(KERN_ERR PFX "init - cpu 0\n");
		741	return -ENODEV;
		742	}
		743
		744	pol->governor = 0; //!!! CPUFREQ_DEFAULT_GOVERNOR;
		745
		746	/* Take a crude guess here. */
		747	pol->cpuinfo.transition_latency = ((rvo + 8) * vstable * VST_UNITS_20US)
		748	+ (3 * (1 << irt) * 10);
		749
		750	if (query_current_values_with_pending_wait())
		751	return -EIO;
		752
		753	pol->cur = find_khz_freq_from_fid(currfid);
		754	dprintk(KERN_DEBUG PFX "policy current frequency %d kHz\n", pol->cur);
		755
		756	/* min/max the cpu is capable of */
		757	if (cpufreq_frequency_table_cpuinfo(pol, ftbl)) {
		758	dprintk(KERN_ERR PFX "invalid ftbl\n");
		759	kfree(ftbl);
		760	return -EINVAL;
		761	}
		762
		763	/* Added by Nino */
		764	cpufreq_frequency_table_get_attr(ftbl, pol->cpu);
		765
		766	dprintk(KERN_INFO PFX "init, curr fid %x vid %x\n", currfid, currvid);
		767	return 0;
		768	}
		769
		770
		771	static int __exit drv_cpu_exit (struct cpufreq_policy *pol)
		772	{
		773	if (pol->cpu != 0)
		774	return -EINVAL;
		775
		776	/* Added by Nino */
		777	cpufreq_frequency_table_put_attr(pol->cpu);
		778
		779	kfree(ftbl);
		780
		781	return 0;
		782	}
		783
		784	static struct cpufreq_driver cpufreq_amd64_driver = {
		785	.verify = drv_verify,
		786	.target = drv_target,
		787	.init = drv_cpu_init,
		788	.exit = drv_cpu_exit,
		789	.name = "powernow-k8",
		790	.owner = THIS_MODULE
		791	};
		792
		793
		794	/* driver entry point for init */
		795	/static/ int __init powernowk8_init(void)
		796	{
		797	int rc;
		798
		799	dprintk(KERN_INFO PFX VERSION "\n");
		800
		801	if (check_supported_cpu() == 0)
		802	return -ENODEV;
		803
		804	rc = find_psb_table();
		805	if (rc)
		806	return rc;
		807
		808	if (pending_bit_stuck()) {
		809	dprintk(KERN_ERR PFX "failing init, change pending bit set\n");
		810	return -EIO;
		811	}
		812
		813	return cpufreq_register_driver(&cpufreq_amd64_driver);
		814	}
		815
		816	/* driver entry point for term */
		817	/static/ void __exit powernowk8_exit(void)
		818	{
		819	dprintk(KERN_INFO PFX "exit\n");
		820	cpufreq_unregister_driver(&cpufreq_amd64_driver);
		821	}
		822
		823	MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
		824	MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
		825	MODULE_LICENSE("GPL");
		826
		827	module_init(powernowk8_init);
		828	module_exit(powernowk8_exit);

Subversion Repositories shark

(root)/shark/trunk/drivers/cpu/cpufreq/powernow-k8.c - Rev 1059