Subversion Repositories shark

/*

 *      Low-Level PCI Access for i386 machines

 *

 * Copyright 1993, 1994 Drew Eckhardt

 *      Visionary Computing

 *      (Unix and Linux consulting and custom programming)

 *      Drew@Colorado.EDU

 *      +1 (303) 786-7975

 *

 * Drew's work was sponsored by:

 *      iX Multiuser Multitasking Magazine

 *      Hannover, Germany

 *      hm@ix.de

 *

 * Copyright 1997--2000 Martin Mares <mj@ucw.cz>

 *

 * For more information, please consult the following manuals (look at

 * http://www.pcisig.com/ for how to get them):

 *

 * PCI BIOS Specification

 * PCI Local Bus Specification

 * PCI to PCI Bridge Specification

 * PCI System Design Guide

 *

 */

#include <linuxcomp.h>

#include <linux/types.h>

#include <linux/kernel.h>

#include <linux/pci.h>

#include <linux/init.h>

#include <linux/ioport.h>

#include <linux/errno.h>

#include "pci2.h"

/*

 * We need to avoid collisions with `mirrored' VGA ports

 * and other strange ISA hardware, so we always want the

 * addresses to be allocated in the 0x000-0x0ff region

 * modulo 0x400.

 *

 * Why? Because some silly external IO cards only decode

 * the low 10 bits of the IO address. The 0x00-0xff region

 * is reserved for motherboard devices that decode all 16

 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,

 * but we want to try to avoid allocating at 0x2900-0x2bff

 * which might have be mirrored at 0x0100-0x03ff..

 */

void

pcibios_align_resource(void *data, struct resource *res,

                       unsigned long size, unsigned long align)

{

        if (res->flags & IORESOURCE_IO) {

                unsigned long start = res->start;

                if (start & 0x300) {

                        start = (start + 0x3ff) & ~0x3ff;

                        res->start = start;

                }

        }

}

/*

 *  Handle resources of PCI devices.  If the world were perfect, we could

 *  just allocate all the resource regions and do nothing more.  It isn't.

 *  On the other hand, we cannot just re-allocate all devices, as it would

 *  require us to know lots of host bridge internals.  So we attempt to

 *  keep as much of the original configuration as possible, but tweak it

 *  when it's found to be wrong.

 *

 *  Known BIOS problems we have to work around:

 *      - I/O or memory regions not configured

 *      - regions configured, but not enabled in the command register

 *      - bogus I/O addresses above 64K used

 *      - expansion ROMs left enabled (this may sound harmless, but given

 *        the fact the PCI specs explicitly allow address decoders to be

 *        shared between expansion ROMs and other resource regions, it's

 *        at least dangerous)

 *

 *  Our solution:

 *      (1) Allocate resources for all buses behind PCI-to-PCI bridges.

 *          This gives us fixed barriers on where we can allocate.

 *      (2) Allocate resources for all enabled devices.  If there is

 *          a collision, just mark the resource as unallocated. Also

 *          disable expansion ROMs during this step.

 *      (3) Try to allocate resources for disabled devices.  If the

 *          resources were assigned correctly, everything goes well,

 *          if they weren't, they won't disturb allocation of other

 *          resources.

 *      (4) Assign new addresses to resources which were either

 *          not configured at all or misconfigured.  If explicitly

 *          requested by the user, configure expansion ROM address

 *          as well.

 */

static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)

{

        struct list_head *ln;

        struct pci_bus *bus;

        struct pci_dev *dev;

        int idx;

        struct resource *r, *pr;

        /* Depth-First Search on bus tree */

        for (ln=bus_list->next; ln != bus_list; ln=ln->next) {

                bus = pci_bus_b(ln);

                if ((dev = bus->self)) {

                        for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {

                                r = &dev->resource[idx];

                                if (!r->start)

                                        continue;

                                pr = pci_find_parent_resource(dev, r);

                                if (!pr || request_resource(pr, r) < 0)

                                        printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));

                        }

                }

                pcibios_allocate_bus_resources(&bus->children);

        }

}

static void __init pcibios_allocate_resources(int pass)

{

        struct pci_dev *dev = NULL;

        int idx, disabled;

        u16 command;

        struct resource *r, *pr;

        while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {

                pci_read_config_word(dev, PCI_COMMAND, &command);

                for(idx = 0; idx < 6; idx++) {

                        r = &dev->resource[idx];

                        if (r->parent)          /* Already allocated */

                                continue;

                        if (!r->start)          /* Address not assigned at all */

                                continue;

                        if (r->flags & IORESOURCE_IO)

                                disabled = !(command & PCI_COMMAND_IO);

                        else

                                disabled = !(command & PCI_COMMAND_MEMORY);

                        if (pass == disabled) {

                                DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",

                                    r->start, r->end, r->flags, disabled, pass);

                                pr = pci_find_parent_resource(dev, r);

                                if (!pr || request_resource(pr, r) < 0) {

                                        printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));

                                        /* We'll assign a new address later */

                                        r->end -= r->start;

                                        r->start = 0;

                                }

                        }

                }

                if (!pass) {

                        r = &dev->resource[PCI_ROM_RESOURCE];

                        if (r->flags & PCI_ROM_ADDRESS_ENABLE) {

                                /* Turn the ROM off, leave the resource region, but keep it unregistered. */

                                u32 reg;

                                DBG("PCI: Switching off ROM of %s\n", pci_name(dev));

                                r->flags &= ~PCI_ROM_ADDRESS_ENABLE;

                                pci_read_config_dword(dev, dev->rom_base_reg, &reg);

                                pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE);

                        }

                }

        }

}

static void __init pcibios_assign_resources(void)

{

        struct pci_dev *dev = NULL;

        int idx;

        struct resource *r;

        while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {

                int class = dev->class >> 8;

                /* Don't touch classless devices and host bridges */

                if (!class || class == PCI_CLASS_BRIDGE_HOST)

                        continue;

                for(idx=0; idx<6; idx++) {

                        r = &dev->resource[idx];

                        /*

                         *  Don't touch IDE controllers and I/O ports of video cards!

                         */

                        if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||

                            (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))

                                continue;

                        /*

                         *  We shall assign a new address to this resource, either because

                         *  the BIOS forgot to do so or because we have decided the old

                         *  address was unusable for some reason.

                         */

                        if (!r->start && r->end)

                                pci_assign_resource(dev, idx);

                }

                if (pci_probe & PCI_ASSIGN_ROMS) {

                        r = &dev->resource[PCI_ROM_RESOURCE];

                        r->end -= r->start;

                        r->start = 0;

                        if (r->end)

                                pci_assign_resource(dev, PCI_ROM_RESOURCE);

                }

        }

}

void __init pcibios_resource_survey(void)

{

        DBG("PCI: Allocating resources\n");

        pcibios_allocate_bus_resources(&pci_root_buses);

        pcibios_allocate_resources(0);

        pcibios_allocate_resources(1);

        pcibios_assign_resources();

}

int pcibios_enable_resources(struct pci_dev *dev, int mask)

{

        u16 cmd, old_cmd;

        int idx;

        struct resource *r;

        pci_read_config_word(dev, PCI_COMMAND, &cmd);

        old_cmd = cmd;

        for(idx=0; idx<6; idx++) {

                /* Only set up the requested stuff */

                if (!(mask & (1<<idx)))

                        continue;

                r = &dev->resource[idx];

                if (!r->start && r->end) {

                        printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));

                        return -EINVAL;

                }

                if (r->flags & IORESOURCE_IO)

                        cmd |= PCI_COMMAND_IO;

                if (r->flags & IORESOURCE_MEM)

                        cmd |= PCI_COMMAND_MEMORY;

        }

        if (dev->resource[PCI_ROM_RESOURCE].start)

                cmd |= PCI_COMMAND_MEMORY;

        if (cmd != old_cmd) {

                printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);

                pci_write_config_word(dev, PCI_COMMAND, cmd);

        }

        return 0;

}

/*

 *  If we set up a device for bus mastering, we need to check the latency

 *  timer as certain crappy BIOSes forget to set it properly.

 */

unsigned int pcibios_max_latency = 255;

void pcibios_set_master(struct pci_dev *dev)

{

        u8 lat;

        pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);

        if (lat < 16)

                lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;

        else if (lat > pcibios_max_latency)

                lat = pcibios_max_latency;

        else

                return;

        printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);

        pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);

}

int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,

                        enum pci_mmap_state mmap_state, int write_combine)

{

        unsigned long prot;

        /* I/O space cannot be accessed via normal processor loads and

         * stores on this platform.

         */

        if (mmap_state == pci_mmap_io)

                return -EINVAL;

        /* Leave vm_pgoff as-is, the PCI space address is the physical

         * address on this platform.

         */

        vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO);

        prot = pgprot_val(vma->vm_page_prot);

        if (boot_cpu_data.x86 > 3)

                prot |= _PAGE_PCD | _PAGE_PWT;

        vma->vm_page_prot = __pgprot(prot);

        /* Write-combine setting is ignored, it is changed via the mtrr

         * interfaces on this platform.

         */

        if (remap_page_range(vma, vma->vm_start, vma->vm_pgoff << PAGE_SHIFT,

                             vma->vm_end - vma->vm_start,

                             vma->vm_page_prot))

                return -EAGAIN;

        return 0;

}