WebSVN - shark - Blame - Rev 1049 - /shark/trunk/drivers/usb/core/hcd.c

Rev	Author	Line No.	Line
846	giacomo	1	/*
		2	* (C) Copyright Linus Torvalds 1999
		3	* (C) Copyright Johannes Erdfelt 1999-2001
		4	* (C) Copyright Andreas Gal 1999
		5	* (C) Copyright Gregory P. Smith 1999
		6	* (C) Copyright Deti Fliegl 1999
		7	* (C) Copyright Randy Dunlap 2000
		8	* (C) Copyright David Brownell 2000-2002
		9	*
		10	* This program is free software; you can redistribute it and/or modify it
		11	* under the terms of the GNU General Public License as published by the
		12	* Free Software Foundation; either version 2 of the License, or (at your
		13	* option) any later version.
		14	*
		15	* This program is distributed in the hope that it will be useful, but
		16	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
		17	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
		18	* for more details.
		19	*
		20	* You should have received a copy of the GNU General Public License
		21	* along with this program; if not, write to the Free Software Foundation,
		22	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
		23	*/
		24
		25	#include <linuxcomp.h>
		26
		27	#include <linux/config.h>
		28
		29	#ifdef CONFIG_USB_DEBUG
		30	#define DEBUG
		31	#endif
		32
		33	#include <linux/module.h>
		34	#include <linux/version.h>
		35	#include <linux/kernel.h>
		36	#include <linux/slab.h>
		37	#include <linux/completion.h>
		38	#include <linux/uts.h> /* for UTS_SYSNAME */
		39	#include <linux/pci.h> /* for hcd->pdev and dma addressing */
		40	#include <linux/dma-mapping.h>
		41	#include <asm/byteorder.h>
		42
		43	#include <linux/usb.h>
		44	#include "hcd.h"
		45
		46
		47	// #define USB_BANDWIDTH_MESSAGES
		48
		49	/-------------------------------------------------------------------------/
		50
		51	/*
		52	* USB Host Controller Driver framework
		53	*
		54	* Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
		55	* HCD-specific behaviors/bugs.
		56	*
		57	* This does error checks, tracks devices and urbs, and delegates to a
		58	* "hc_driver" only for code (and data) that really needs to know about
		59	* hardware differences. That includes root hub registers, i/o queues,
		60	* and so on ... but as little else as possible.
		61	*
		62	* Shared code includes most of the "root hub" code (these are emulated,
		63	* though each HC's hardware works differently) and PCI glue, plus request
		64	* tracking overhead. The HCD code should only block on spinlocks or on
		65	* hardware handshaking; blocking on software events (such as other kernel
		66	* threads releasing resources, or completing actions) is all generic.
		67	*
		68	* Happens the USB 2.0 spec says this would be invisible inside the "USBD",
		69	* and includes mostly a "HCDI" (HCD Interface) along with some APIs used
		70	* only by the hub driver ... and that neither should be seen or used by
		71	* usb client device drivers.
		72	*
		73	* Contributors of ideas or unattributed patches include: David Brownell,
		74	* Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
		75	*
		76	* HISTORY:
		77	* 2002-02-21 Pull in most of the usb_bus support from usb.c; some
		78	* associated cleanup. "usb_hcd" still != "usb_bus".
		79	* 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
		80	*/
		81
		82	/-------------------------------------------------------------------------/
		83
		84	/* host controllers we manage */
		85	LIST_HEAD (usb_bus_list);
		86	EXPORT_SYMBOL_GPL (usb_bus_list);
		87
		88	/* used when allocating bus numbers */
		89	#define USB_MAXBUS 64
		90	struct usb_busmap {
		91	unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
		92	};
		93	static struct usb_busmap busmap;
		94
		95	/* used when updating list of hcds */
		96	DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
		97	EXPORT_SYMBOL_GPL (usb_bus_list_lock);
		98
		99	/* used when updating hcd data */
		100	static spinlock_t hcd_data_lock = SPIN_LOCK_UNLOCKED;
		101
		102	/-------------------------------------------------------------------------/
		103
		104	/*
		105	* Sharable chunks of root hub code.
		106	*/
		107
		108	/-------------------------------------------------------------------------/
		109
		110	#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
		111	#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
		112
		113	/* usb 2.0 root hub device descriptor */
		114	static const u8 usb2_rh_dev_descriptor [18] = {
		115	0x12, /* __u8 bLength; */
		116	0x01, /* __u8 bDescriptorType; Device */
		117	0x00, 0x02, /* __u16 bcdUSB; v2.0 */
		118
		119	0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
		120	0x00, /* __u8 bDeviceSubClass; */
		121	0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
		122	0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
		123
		124	0x00, 0x00, /* __u16 idVendor; */
		125	0x00, 0x00, /* __u16 idProduct; */
		126	KERNEL_VER, KERNEL_REL, /* __u16 bcdDevice */
		127
		128	0x03, /* __u8 iManufacturer; */
		129	0x02, /* __u8 iProduct; */
		130	0x01, /* __u8 iSerialNumber; */
		131	0x01 /* __u8 bNumConfigurations; */
		132	};
		133
		134	/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
		135
		136	/* usb 1.1 root hub device descriptor */
		137	static const u8 usb11_rh_dev_descriptor [18] = {
		138	0x12, /* __u8 bLength; */
		139	0x01, /* __u8 bDescriptorType; Device */
		140	0x10, 0x01, /* __u16 bcdUSB; v1.1 */
		141
		142	0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
		143	0x00, /* __u8 bDeviceSubClass; */
		144	0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
		145	0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
		146
		147	0x00, 0x00, /* __u16 idVendor; */
		148	0x00, 0x00, /* __u16 idProduct; */
		149	KERNEL_VER, KERNEL_REL, /* __u16 bcdDevice */
		150
		151	0x03, /* __u8 iManufacturer; */
		152	0x02, /* __u8 iProduct; */
		153	0x01, /* __u8 iSerialNumber; */
		154	0x01 /* __u8 bNumConfigurations; */
		155	};
		156
		157
		158	/-------------------------------------------------------------------------/
		159
		160	/* Configuration descriptors for our root hubs */
		161
		162	static const u8 fs_rh_config_descriptor [] = {
		163
		164	/* one configuration */
		165	0x09, /* __u8 bLength; */
		166	0x02, /* __u8 bDescriptorType; Configuration */
		167	0x19, 0x00, /* __u16 wTotalLength; */
		168	0x01, /* __u8 bNumInterfaces; (1) */
		169	0x01, /* __u8 bConfigurationValue; */
		170	0x00, /* __u8 iConfiguration; */
		171	0x40, /* __u8 bmAttributes;
		172	Bit 7: Bus-powered,
		173	6: Self-powered,
		174	5 Remote-wakwup,
		175	4..0: resvd */
		176	0x00, /* __u8 MaxPower; */
		177
		178	/* USB 1.1:
		179	* USB 2.0, single TT organization (mandatory):
		180	* one interface, protocol 0
		181	*
		182	* USB 2.0, multiple TT organization (optional):
		183	* two interfaces, protocols 1 (like single TT)
		184	* and 2 (multiple TT mode) ... config is
		185	* sometimes settable
		186	* NOT IMPLEMENTED
		187	*/
		188
		189	/* one interface */
		190	0x09, /* __u8 if_bLength; */
		191	0x04, /* __u8 if_bDescriptorType; Interface */
		192	0x00, /* __u8 if_bInterfaceNumber; */
		193	0x00, /* __u8 if_bAlternateSetting; */
		194	0x01, /* __u8 if_bNumEndpoints; */
		195	0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
		196	0x00, /* __u8 if_bInterfaceSubClass; */
		197	0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
		198	0x00, /* __u8 if_iInterface; */
		199
		200	/* one endpoint (status change endpoint) */
		201	0x07, /* __u8 ep_bLength; */
		202	0x05, /* __u8 ep_bDescriptorType; Endpoint */
		203	0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
		204	0x03, /* __u8 ep_bmAttributes; Interrupt */
		205	0x02, 0x00, /* __u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
		206	0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
		207	};
		208
		209	static const u8 hs_rh_config_descriptor [] = {
		210
		211	/* one configuration */
		212	0x09, /* __u8 bLength; */
		213	0x02, /* __u8 bDescriptorType; Configuration */
		214	0x19, 0x00, /* __u16 wTotalLength; */
		215	0x01, /* __u8 bNumInterfaces; (1) */
		216	0x01, /* __u8 bConfigurationValue; */
		217	0x00, /* __u8 iConfiguration; */
		218	0x40, /* __u8 bmAttributes;
		219	Bit 7: Bus-powered,
		220	6: Self-powered,
		221	5 Remote-wakwup,
		222	4..0: resvd */
		223	0x00, /* __u8 MaxPower; */
		224
		225	/* USB 1.1:
		226	* USB 2.0, single TT organization (mandatory):
		227	* one interface, protocol 0
		228	*
		229	* USB 2.0, multiple TT organization (optional):
		230	* two interfaces, protocols 1 (like single TT)
		231	* and 2 (multiple TT mode) ... config is
		232	* sometimes settable
		233	* NOT IMPLEMENTED
		234	*/
		235
		236	/* one interface */
		237	0x09, /* __u8 if_bLength; */
		238	0x04, /* __u8 if_bDescriptorType; Interface */
		239	0x00, /* __u8 if_bInterfaceNumber; */
		240	0x00, /* __u8 if_bAlternateSetting; */
		241	0x01, /* __u8 if_bNumEndpoints; */
		242	0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
		243	0x00, /* __u8 if_bInterfaceSubClass; */
		244	0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
		245	0x00, /* __u8 if_iInterface; */
		246
		247	/* one endpoint (status change endpoint) */
		248	0x07, /* __u8 ep_bLength; */
		249	0x05, /* __u8 ep_bDescriptorType; Endpoint */
		250	0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
		251	0x03, /* __u8 ep_bmAttributes; Interrupt */
		252	0x02, 0x00, /* __u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
		253	0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
		254	};
		255
		256	/-------------------------------------------------------------------------/
		257
		258	/*
		259	* helper routine for returning string descriptors in UTF-16LE
		260	* input can actually be ISO-8859-1; ASCII is its 7-bit subset
		261	*/
		262	static int ascii2utf (char s, u8 utf, int utfmax)
		263	{
		264	int retval;
		265
		266	for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
		267	utf++ = s++;
		268	*utf++ = 0;
		269	}
		270	return retval;
		271	}
		272
		273	/*
		274	* rh_string - provides manufacturer, product and serial strings for root hub
		275	* @id: the string ID number (1: serial number, 2: product, 3: vendor)
		276	* @hcd: the host controller for this root hub
		277	* @type: string describing our driver
		278	* @data: return packet in UTF-16 LE
		279	* @len: length of the return packet
		280	*
		281	* Produces either a manufacturer, product or serial number string for the
		282	* virtual root hub device.
		283	*/
		284	static int rh_string (
		285	int id,
		286	struct usb_hcd *hcd,
		287	u8 *data,
		288	int len
		289	) {
		290	char buf [100];
		291
		292	// language ids
		293	if (id == 0) {
		294	data++ = 4; data++ = 3; /* 4 bytes string data */
		295	data++ = 0x09; data++ = 0x04; /* MSFT-speak for "en-us" */
		296	return 4;
		297
		298	// serial number
		299	} else if (id == 1) {
		300	strcpy (buf, hcd->self.bus_name);
		301
		302	// product description
		303	} else if (id == 2) {
		304	strcpy (buf, hcd->product_desc);
		305
		306	// id 3 == vendor description
		307	} else if (id == 3) {
		308	sprintf26 (buf, "%s %s %s", UTS_SYSNAME, UTS_RELEASE,
		309	hcd->description);
		310
		311	// unsupported IDs --> "protocol stall"
		312	} else
		313	return 0;
		314
		315	data [0] = 2 * (strlen (buf) + 1);
		316	data [1] = 3; /* type == string */
		317	return 2 + ascii2utf (buf, data + 2, len - 2);
		318	}
		319
		320
		321	/* Root hub control transfers execute synchronously */
		322	static int rh_call_control (struct usb_hcd hcd, struct urb urb)
		323	{
		324	struct usb_ctrlrequest cmd = (struct usb_ctrlrequest ) urb->setup_packet;
		325	u16 typeReq, wValue, wIndex, wLength;
		326	const u8 *bufp = 0;
		327	u8 *ubuf = urb->transfer_buffer;
		328	int len = 0;
		329	unsigned long flags;
		330
		331	typeReq = (cmd->bRequestType << 8) \| cmd->bRequest;
		332	wValue = le16_to_cpu (cmd->wValue);
		333	wIndex = le16_to_cpu (cmd->wIndex);
		334	wLength = le16_to_cpu (cmd->wLength);
		335
		336	if (wLength > urb->transfer_buffer_length)
		337	goto error;
		338	/* set up for success */
		339	urb->status = 0;
		340	urb->actual_length = wLength;
		341
		342	switch (typeReq) {
		343
		344	/* DEVICE REQUESTS */
		345
		346	case DeviceRequest \| USB_REQ_GET_STATUS:
		347	// DEVICE_REMOTE_WAKEUP
		348	ubuf [0] = 1; // selfpowered
		349	ubuf [1] = 0;
		350	/* FALLTHROUGH */
		351	case DeviceOutRequest \| USB_REQ_CLEAR_FEATURE:
		352	case DeviceOutRequest \| USB_REQ_SET_FEATURE:
		353	dev_dbg (hcd->controller, "no device features yet yet\n");
		354	break;
		355	case DeviceRequest \| USB_REQ_GET_CONFIGURATION:
		356	ubuf [0] = 1;
		357	/* FALLTHROUGH */
		358	case DeviceOutRequest \| USB_REQ_SET_CONFIGURATION:
		359	break;
		360	case DeviceRequest \| USB_REQ_GET_DESCRIPTOR:
		361	switch (wValue & 0xff00) {
		362	case USB_DT_DEVICE << 8:
		363	if (hcd->driver->flags & HCD_USB2)
		364	bufp = usb2_rh_dev_descriptor;
		365	else if (hcd->driver->flags & HCD_USB11)
		366	bufp = usb11_rh_dev_descriptor;
		367	else
		368	goto error;
		369	len = 18;
		370	break;
		371	case USB_DT_CONFIG << 8:
		372	if (hcd->driver->flags & HCD_USB2) {
		373	bufp = hs_rh_config_descriptor;
		374	len = sizeof hs_rh_config_descriptor;
		375	} else {
		376	bufp = fs_rh_config_descriptor;
		377	len = sizeof fs_rh_config_descriptor;
		378	}
		379	break;
		380	case USB_DT_STRING << 8:
		381	urb->actual_length = rh_string (
		382	wValue & 0xff, hcd,
		383	ubuf, wLength);
		384	break;
		385	default:
		386	goto error;
		387	}
		388	break;
		389	case DeviceRequest \| USB_REQ_GET_INTERFACE:
		390	ubuf [0] = 0;
		391	/* FALLTHROUGH */
		392	case DeviceOutRequest \| USB_REQ_SET_INTERFACE:
		393	break;
		394	case DeviceOutRequest \| USB_REQ_SET_ADDRESS:
		395	// wValue == urb->dev->devaddr
		396	dev_dbg (hcd->controller, "root hub device address %d\n",
		397	wValue);
		398	break;
		399
		400	/* INTERFACE REQUESTS (no defined feature/status flags) */
		401
		402	/* ENDPOINT REQUESTS */
		403
		404	case EndpointRequest \| USB_REQ_GET_STATUS:
		405	// ENDPOINT_HALT flag
		406	ubuf [0] = 0;
		407	ubuf [1] = 0;
		408	/* FALLTHROUGH */
		409	case EndpointOutRequest \| USB_REQ_CLEAR_FEATURE:
		410	case EndpointOutRequest \| USB_REQ_SET_FEATURE:
		411	dev_dbg (hcd->controller, "no endpoint features yet\n");
		412	break;
		413
		414	/* CLASS REQUESTS (and errors) */
		415
		416	default:
		417	/* non-generic request */
		418	urb->status = hcd->driver->hub_control (hcd,
		419	typeReq, wValue, wIndex,
		420	ubuf, wLength);
		421	break;
		422	error:
		423	/* "protocol stall" on error */
		424	urb->status = -EPIPE;
		425	dev_dbg (hcd->controller, "unsupported hub control message (maxchild %d)\n",
		426	urb->dev->maxchild);
		427	}
		428	if (urb->status) {
		429	urb->actual_length = 0;
		430	dev_dbg (hcd->controller, "CTRL: TypeReq=0x%x val=0x%x idx=0x%x len=%d ==> %d\n",
		431	typeReq, wValue, wIndex, wLength, urb->status);
		432	}
		433	if (bufp) {
		434	if (urb->transfer_buffer_length < len)
		435	len = urb->transfer_buffer_length;
		436	urb->actual_length = len;
		437	// always USB_DIR_IN, toward host
		438	memcpy (ubuf, bufp, len);
		439	}
		440
		441	/* any errors get returned through the urb completion */
		442	local_irq_save (flags);
		443	usb_hcd_giveback_urb (hcd, urb, NULL);
		444	local_irq_restore (flags);
		445	return 0;
		446	}
		447
		448	/-------------------------------------------------------------------------/
		449
		450	/*
		451	* Root Hub interrupt transfers are synthesized with a timer.
		452	* Completions are called in_interrupt() but not in_irq().
		453	*/
		454
		455	static void rh_report_status (unsigned long ptr);
		456
		457	static int rh_status_urb (struct usb_hcd hcd, struct urb urb)
		458	{
		459	int len = 1 + (urb->dev->maxchild / 8);
		460
		461	/* rh_timer protected by hcd_data_lock */
		462	if (hcd->rh_timer.data
		463	\|\| urb->status != -EINPROGRESS
		464	\|\| urb->transfer_buffer_length < len
		465	\|\| !HCD_IS_RUNNING (hcd->state)) {
		466	dev_dbg (hcd->controller,
		467	"not queuing rh status urb, stat %d\n",
		468	urb->status);
		469	return -EINVAL;
		470	}
		471
		472	init_timer (&hcd->rh_timer);
		473	hcd->rh_timer.function = rh_report_status;
		474	hcd->rh_timer.data = (unsigned long) urb;
		475	/* USB 2.0 spec says 256msec; this is close enough */
		476	hcd->rh_timer.expires = jiffies26 + HZ/4;
		477	add_timer (&hcd->rh_timer);
		478	urb->hcpriv = hcd; /* nonzero to indicate it's queued */
		479	return 0;
		480	}
		481
		482	/* timer callback */
		483
		484	static void rh_report_status (unsigned long ptr)
		485	{
		486	struct urb *urb;
		487	struct usb_hcd *hcd;
		488	int length = 0;
		489	unsigned long flags;
		490
		491	urb = (struct urb *) ptr;
		492	local_irq_save (flags);
		493	spin_lock (&urb->lock);
		494
		495	/* do nothing if the urb's been unlinked */
		496	if (!urb->dev
		497	\|\| urb->status != -EINPROGRESS
		498	\|\| (hcd = urb->dev->bus->hcpriv) == 0) {
		499	spin_unlock (&urb->lock);
		500	local_irq_restore (flags);
		501	return;
		502	}
		503
		504	if (!HCD_IS_SUSPENDED (hcd->state))
		505	length = hcd->driver->hub_status_data (
		506	hcd, urb->transfer_buffer);
		507
		508	/* complete the status urb, or retrigger the timer */
		509	spin_lock (&hcd_data_lock);
		510	if (length > 0) {
		511	hcd->rh_timer.data = 0;
		512	urb->actual_length = length;
		513	urb->status = 0;
		514	urb->hcpriv = 0;
		515	} else
		516	mod_timer (&hcd->rh_timer, jiffies26 + HZ/4);
		517	spin_unlock (&hcd_data_lock);
		518	spin_unlock (&urb->lock);
		519
		520	/* local irqs are always blocked in completions */
		521	if (length > 0)
		522	usb_hcd_giveback_urb (hcd, urb, NULL);
		523	local_irq_restore (flags);
		524	}
		525
		526	/-------------------------------------------------------------------------/
		527
		528	static int rh_urb_enqueue (struct usb_hcd hcd, struct urb urb)
		529	{
		530	if (usb_pipeint (urb->pipe)) {
		531	int retval;
		532	unsigned long flags;
		533
		534	spin_lock_irqsave (&hcd_data_lock, flags);
		535	retval = rh_status_urb (hcd, urb);
		536
		537	spin_unlock_irqrestore (&hcd_data_lock, flags);
		538	return retval;
		539	}
		540	if (usb_pipecontrol (urb->pipe))
		541	return rh_call_control (hcd, urb);
		542	else
		543	return -EINVAL;
		544	}
		545
		546	/-------------------------------------------------------------------------/
		547
		548	void usb_rh_status_dequeue (struct usb_hcd hcd, struct urb urb)
		549	{
		550	unsigned long flags;
		551
		552	/* note: always a synchronous unlink */
		553	del_timer_sync (&hcd->rh_timer);
		554	hcd->rh_timer.data = 0;
		555
		556	local_irq_save (flags);
		557	urb->hcpriv = 0;
		558	usb_hcd_giveback_urb (hcd, urb, NULL);
		559	local_irq_restore (flags);
		560	}
		561
		562	/-------------------------------------------------------------------------/
		563
		564	/* exported only within usbcore */
		565	struct usb_bus usb_bus_get (struct usb_bus bus)
		566	{
		567	struct class_device *tmp;
		568
		569	if (!bus)
		570	return NULL;
		571
		572	tmp = class_device_get(&bus->class_dev);
		573	if (tmp)
		574	return to_usb_bus(tmp);
		575	else
		576	return NULL;
		577	}
		578
		579	/* exported only within usbcore */
		580	void usb_bus_put (struct usb_bus *bus)
		581	{
		582	if (bus)
		583	class_device_put(&bus->class_dev);
		584	}
		585
		586	/-------------------------------------------------------------------------/
		587
		588	static void usb_host_release(struct class_device *class_dev)
		589	{
		590	struct usb_bus *bus = to_usb_bus(class_dev);
		591
		592	if (bus->release)
		593	bus->release(bus);
		594	}
		595
		596	static struct class usb_host_class = {
		597	.name = "usb_host",
		598	.release = &usb_host_release,
		599	};
		600
		601	void usb_host_init(void)
		602	{
		603	class_register(&usb_host_class);
		604	}
		605
		606	void usb_host_cleanup(void)
		607	{
		608	class_unregister(&usb_host_class);
		609	}
		610
		611	/**
		612	* usb_bus_init - shared initialization code
		613	* @bus: the bus structure being initialized
		614	*
		615	* This code is used to initialize a usb_bus structure, memory for which is
		616	* separately managed.
		617	*/
		618	void usb_bus_init (struct usb_bus *bus)
		619	{
		620	memset (&bus->devmap, 0, sizeof(struct usb_devmap));
		621
		622	bus->devnum_next = 1;
		623
		624	bus->root_hub = NULL;
		625	bus->hcpriv = NULL;
		626	bus->busnum = -1;
		627	bus->bandwidth_allocated = 0;
		628	bus->bandwidth_int_reqs = 0;
		629	bus->bandwidth_isoc_reqs = 0;
		630
		631	INIT_LIST_HEAD (&bus->bus_list);
		632	}
		633	EXPORT_SYMBOL (usb_bus_init);
		634
		635	/**
		636	* usb_alloc_bus - creates a new USB host controller structure
		637	* @op: pointer to a struct usb_operations that this bus structure should use
		638	* Context: !in_interrupt()
		639	*
		640	* Creates a USB host controller bus structure with the specified
		641	* usb_operations and initializes all the necessary internal objects.
		642	*
		643	* If no memory is available, NULL is returned.
		644	*
		645	* The caller should call usb_put_bus() when it is finished with the structure.
		646	*/
		647	struct usb_bus usb_alloc_bus (struct usb_operations op)
		648	{
		649	struct usb_bus *bus;
		650
		651	bus = kmalloc (sizeof *bus, GFP_KERNEL);
		652	if (!bus)
		653	return NULL;
		654	memset(bus, 0, sizeof(struct usb_bus));
		655	usb_bus_init (bus);
		656	bus->op = op;
		657	return bus;
		658	}
		659	EXPORT_SYMBOL (usb_alloc_bus);
		660
		661	/-------------------------------------------------------------------------/
		662
		663	/**
		664	* usb_register_bus - registers the USB host controller with the usb core
		665	* @bus: pointer to the bus to register
		666	* Context: !in_interrupt()
		667	*
		668	* Assigns a bus number, and links the controller into usbcore data
		669	* structures so that it can be seen by scanning the bus list.
		670	*/
		671	int usb_register_bus(struct usb_bus *bus)
		672	{
		673	int busnum;
		674	int retval;
		675
		676	down (&usb_bus_list_lock);
		677
		678	busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
		679	if (busnum < USB_MAXBUS) {
		680	set_bit (busnum, busmap.busmap);
		681	bus->busnum = busnum;
		682	} else
		683	warn ("too many buses");
		684
		685	snprintf26(bus->class_dev.class_id, BUS_ID_SIZE, "usb%d", busnum);
		686	bus->class_dev.class = &usb_host_class;
		687	bus->class_dev.dev = bus->controller;
		688	retval = class_device_register(&bus->class_dev);
		689	if (retval) {
		690	clear_bit(busnum, busmap.busmap);
		691	up(&usb_bus_list_lock);
		692	return retval;
		693	}
		694
		695	/* Add it to the local list of buses */
		696	list_add (&bus->bus_list, &usb_bus_list);
		697	up (&usb_bus_list_lock);
		698	usbfs_add_bus (bus);
		699
		700	dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
		701	return 0;
		702	}
		703	EXPORT_SYMBOL (usb_register_bus);
		704
		705	/**
		706	* usb_deregister_bus - deregisters the USB host controller
		707	* @bus: pointer to the bus to deregister
		708	* Context: !in_interrupt()
		709	*
		710	* Recycles the bus number, and unlinks the controller from usbcore data
		711	* structures so that it won't be seen by scanning the bus list.
		712	*/
		713	void usb_deregister_bus (struct usb_bus *bus)
		714	{
		715	dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
		716
		717	/*
		718	* NOTE: make sure that all the devices are removed by the
		719	* controller code, as well as having it call this when cleaning
		720	* itself up
		721	*/
		722	down (&usb_bus_list_lock);
		723	list_del (&bus->bus_list);
		724	up (&usb_bus_list_lock);
		725
		726	usbfs_remove_bus (bus);
		727
		728	clear_bit (bus->busnum, busmap.busmap);
		729
		730	class_device_unregister(&bus->class_dev);
		731	}
		732	EXPORT_SYMBOL (usb_deregister_bus);
		733
		734	/**
		735	* usb_register_root_hub - called by HCD to register its root hub
		736	* @usb_dev: the usb root hub device to be registered.
		737	* @parent_dev: the parent device of this root hub.
		738	*
		739	* The USB host controller calls this function to register the root hub
		740	* properly with the USB subsystem. It sets up the device properly in
		741	* the driverfs tree, and then calls usb_new_device() to register the
		742	* usb device. It also assigns the root hub's USB address (always 1).
		743	*/
		744	int usb_register_root_hub (struct usb_device usb_dev, struct device parent_dev)
		745	{
		746	const int devnum = 1;
		747	int retval;
		748
		749	sprintf26 (&usb_dev->dev.bus_id[0], "usb%d", usb_dev->bus->busnum);
		750	usb_dev->state = USB_STATE_DEFAULT;
		751
		752	usb_dev->devnum = devnum;
		753	usb_dev->bus->devnum_next = devnum + 1;
		754	set_bit (devnum, usb_dev->bus->devmap.devicemap);
		755
		756	retval = usb_new_device (usb_dev, parent_dev);
		757
		758	if (retval)
		759	dev_err (parent_dev, "can't register root hub for %s, %d\n",
		760	usb_dev->dev.bus_id, retval);
		761	return retval;
		762	}
		763	EXPORT_SYMBOL (usb_register_root_hub);
		764
		765
		766	/-------------------------------------------------------------------------/
		767
		768	/**
		769	* usb_calc_bus_time - approximate periodic transaction time in nanoseconds
		770	* @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
		771	* @is_input: true iff the transaction sends data to the host
		772	* @isoc: true for isochronous transactions, false for interrupt ones
		773	* @bytecount: how many bytes in the transaction.
		774	*
		775	* Returns approximate bus time in nanoseconds for a periodic transaction.
		776	* See USB 2.0 spec section 5.11.3; only periodic transfers need to be
		777	* scheduled in software, this function is only used for such scheduling.
		778	*/
		779	long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
		780	{
		781	unsigned long tmp;
		782
		783	switch (speed) {
		784	case USB_SPEED_LOW: /* INTR only */
		785	if (is_input) {
		786	tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
		787	return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
		788	} else {
		789	tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
		790	return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
		791	}
		792	case USB_SPEED_FULL: /* ISOC or INTR */
		793	if (isoc) {
		794	tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
		795	return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
		796	} else {
		797	tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
		798	return (9107L + BW_HOST_DELAY + tmp);
		799	}
		800	case USB_SPEED_HIGH: /* ISOC or INTR */
		801	// FIXME adjust for input vs output
		802	if (isoc)
		803	tmp = HS_USECS (bytecount);
		804	else
		805	tmp = HS_USECS_ISO (bytecount);
		806	return tmp;
		807	default:
		808	dbg ("bogus device speed!");
		809	return -1;
		810	}
		811	}
		812	EXPORT_SYMBOL (usb_calc_bus_time);
		813
		814	/*
		815	* usb_check_bandwidth():
		816	*
		817	* old_alloc is from host_controller->bandwidth_allocated in microseconds;
		818	* bustime is from calc_bus_time(), but converted to microseconds.
		819	*
		820	* returns <bustime in us> if successful,
		821	* or -ENOSPC if bandwidth request fails.
		822	*
		823	* FIXME:
		824	* This initial implementation does not use Endpoint.bInterval
		825	* in managing bandwidth allocation.
		826	* It probably needs to be expanded to use Endpoint.bInterval.
		827	* This can be done as a later enhancement (correction).
		828	*
		829	* This will also probably require some kind of
		830	* frame allocation tracking...meaning, for example,
		831	* that if multiple drivers request interrupts every 10 USB frames,
		832	* they don't all have to be allocated at
		833	* frame numbers N, N+10, N+20, etc. Some of them could be at
		834	* N+11, N+21, N+31, etc., and others at
		835	* N+12, N+22, N+32, etc.
		836	*
		837	* Similarly for isochronous transfers...
		838	*
		839	* Individual HCDs can schedule more directly ... this logic
		840	* is not correct for high speed transfers.
		841	*/
		842	int usb_check_bandwidth (struct usb_device dev, struct urb urb)
		843	{
		844	unsigned int pipe = urb->pipe;
		845	long bustime;
		846	int is_in = usb_pipein (pipe);
		847	int is_iso = usb_pipeisoc (pipe);
		848	int old_alloc = dev->bus->bandwidth_allocated;
		849	int new_alloc;
		850
		851
		852	bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso,
		853	usb_maxpacket (dev, pipe, !is_in)));
		854	if (is_iso)
		855	bustime /= urb->number_of_packets;
		856
		857	new_alloc = old_alloc + (int) bustime;
		858	if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) {
		859	#ifdef DEBUG
		860	char *mode =
		861	#ifdef CONFIG_USB_BANDWIDTH
		862	"";
		863	#else
		864	"would have ";
		865	#endif
		866	dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n",
		867	mode, old_alloc, bustime, new_alloc);
		868	#endif
		869	#ifdef CONFIG_USB_BANDWIDTH
		870	bustime = -ENOSPC; /* report error */
		871	#endif
		872	}
		873
		874	return bustime;
		875	}
		876	EXPORT_SYMBOL (usb_check_bandwidth);
		877
		878
		879	/**
		880	* usb_claim_bandwidth - records bandwidth for a periodic transfer
		881	* @dev: source/target of request
		882	* @urb: request (urb->dev == dev)
		883	* @bustime: bandwidth consumed, in (average) microseconds per frame
		884	* @isoc: true iff the request is isochronous
		885	*
		886	* Bus bandwidth reservations are recorded purely for diagnostic purposes.
		887	* HCDs are expected not to overcommit periodic bandwidth, and to record such
		888	* reservations whenever endpoints are added to the periodic schedule.
		889	*
		890	* FIXME averaging per-frame is suboptimal. Better to sum over the HCD's
		891	* entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable
		892	* for EHCI (256/512/1024 frames, default 1024) and have the bus expose how
		893	* large its periodic schedule is.
		894	*/
		895	void usb_claim_bandwidth (struct usb_device dev, struct urb urb, int bustime, int isoc)
		896	{
		897	dev->bus->bandwidth_allocated += bustime;
		898	if (isoc)
		899	dev->bus->bandwidth_isoc_reqs++;
		900	else
		901	dev->bus->bandwidth_int_reqs++;
		902	urb->bandwidth = bustime;
		903
		904	#ifdef USB_BANDWIDTH_MESSAGES
		905	dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n",
		906	bustime,
		907	isoc ? "ISOC" : "INTR",
		908	dev->bus->bandwidth_allocated,
		909	dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
		910	#endif
		911	}
		912	EXPORT_SYMBOL (usb_claim_bandwidth);
		913
		914
		915	/**
		916	* usb_release_bandwidth - reverses effect of usb_claim_bandwidth()
		917	* @dev: source/target of request
		918	* @urb: request (urb->dev == dev)
		919	* @isoc: true iff the request is isochronous
		920	*
		921	* This records that previously allocated bandwidth has been released.
		922	* Bandwidth is released when endpoints are removed from the host controller's
		923	* periodic schedule.
		924	*/
		925	void usb_release_bandwidth (struct usb_device dev, struct urb urb, int isoc)
		926	{
		927	dev->bus->bandwidth_allocated -= urb->bandwidth;
		928	if (isoc)
		929	dev->bus->bandwidth_isoc_reqs--;
		930	else
		931	dev->bus->bandwidth_int_reqs--;
		932
		933	#ifdef USB_BANDWIDTH_MESSAGES
		934	dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n",
		935	urb->bandwidth,
		936	isoc ? "ISOC" : "INTR",
		937	dev->bus->bandwidth_allocated,
		938	dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
		939	#endif
		940	urb->bandwidth = 0;
		941	}
		942	EXPORT_SYMBOL (usb_release_bandwidth);
		943
		944
		945	/-------------------------------------------------------------------------/
		946
		947	/*
		948	* Generic HC operations.
		949	*/
		950
		951	/-------------------------------------------------------------------------/
		952
		953	/* called from khubd, or root hub init threads for hcd-private init */
		954	static int hcd_alloc_dev (struct usb_device *udev)
		955	{
		956	struct hcd_dev *dev;
		957	struct usb_hcd *hcd;
		958	unsigned long flags;
		959
		960	if (!udev \|\| udev->hcpriv)
		961	return -EINVAL;
		962	if (!udev->bus \|\| !udev->bus->hcpriv)
		963	return -ENODEV;
		964	hcd = udev->bus->hcpriv;
		965	if (hcd->state == USB_STATE_QUIESCING)
		966	return -ENOLINK;
		967
		968	dev = (struct hcd_dev ) kmalloc (sizeof dev, GFP_KERNEL);
		969	if (dev == NULL)
		970	return -ENOMEM;
		971	memset (dev, 0, sizeof *dev);
		972
		973	INIT_LIST_HEAD (&dev->dev_list);
		974	INIT_LIST_HEAD (&dev->urb_list);
		975
		976	spin_lock_irqsave (&hcd_data_lock, flags);
		977	list_add (&dev->dev_list, &hcd->dev_list);
		978	// refcount is implicit
		979	udev->hcpriv = dev;
		980	spin_unlock_irqrestore (&hcd_data_lock, flags);
		981
		982	return 0;
		983	}
		984
		985	/-------------------------------------------------------------------------/
		986
		987	static void urb_unlink (struct urb *urb)
		988	{
		989	unsigned long flags;
		990	struct usb_device *dev;
		991
		992	/* Release any periodic transfer bandwidth */
		993	if (urb->bandwidth)
		994	usb_release_bandwidth (urb->dev, urb,
		995	usb_pipeisoc (urb->pipe));
		996
		997	/* clear all state linking urb to this dev (and hcd) */
		998
		999	spin_lock_irqsave (&hcd_data_lock, flags);
		1000	list_del_init (&urb->urb_list);
		1001	dev = urb->dev;
		1002	spin_unlock_irqrestore (&hcd_data_lock, flags);
		1003	usb_put_dev (dev);
		1004	}
		1005
		1006
		1007	/* may be called in any context with a valid urb->dev usecount
		1008	* caller surrenders "ownership" of urb
		1009	* expects usb_submit_urb() to have sanity checked and conditioned all
		1010	* inputs in the urb
		1011	*/
		1012	static int hcd_submit_urb (struct urb *urb, int mem_flags)
		1013	{
		1014	int status;
		1015	struct usb_hcd *hcd = urb->dev->bus->hcpriv;
		1016	struct hcd_dev *dev = urb->dev->hcpriv;
		1017	unsigned long flags;
		1018
		1019	if (!hcd \|\| !dev)
		1020	return -ENODEV;
		1021
		1022	/*
		1023	* FIXME: make urb timeouts be generic, keeping the HCD cores
		1024	* as simple as possible.
		1025	*/
		1026
		1027	// NOTE: a generic device/urb monitoring hook would go here.
		1028	// hcd_monitor_hook(MONITOR_URB_SUBMIT, urb)
		1029	// It would catch submission paths for all urbs.
		1030
		1031	/*
		1032	* Atomically queue the urb, first to our records, then to the HCD.
		1033	* Access to urb->status is controlled by urb->lock ... changes on
		1034	* i/o completion (normal or fault) or unlinking.
		1035	*/
		1036
		1037	// FIXME: verify that quiescing hc works right (RH cleans up)
		1038	spin_lock_irqsave (&hcd_data_lock, flags);
		1039	if (HCD_IS_RUNNING (hcd->state) && hcd->state != USB_STATE_QUIESCING) {
		1040	usb_get_dev (urb->dev);
		1041	list_add_tail (&urb->urb_list, &dev->urb_list);
		1042	status = 0;
		1043	} else {
		1044	INIT_LIST_HEAD (&urb->urb_list);
		1045	status = -ESHUTDOWN;
		1046	}
		1047	spin_unlock_irqrestore (&hcd_data_lock, flags);
		1048	if (status)
		1049	return status;
		1050
		1051	/* increment urb's reference count as part of giving it to the HCD
		1052	* (which now controls it). HCD guarantees that it either returns
		1053	* an error or calls giveback(), but not both.
		1054	*/
		1055	urb = usb_get_urb (urb);
		1056	if (urb->dev == hcd->self.root_hub) {
		1057	/* NOTE: requirement on hub callers (usbfs and the hub
		1058	* driver, for now) that URBs' urb->transfer_buffer be
		1059	* valid and usb_buffer_{sync,unmap}() not be needed, since
		1060	* they could clobber root hub response data.
		1061	*/
		1062	urb->transfer_flags \|= (URB_NO_TRANSFER_DMA_MAP
		1063	\| URB_NO_SETUP_DMA_MAP);
		1064	status = rh_urb_enqueue (hcd, urb);
		1065	goto done;
		1066	}
		1067
		1068	/* lower level hcd code should use *_dma exclusively,
		1069	* unless it uses pio or talks to another transport.
		1070	*/
		1071	if (hcd->controller->dma_mask) {
		1072	if (usb_pipecontrol (urb->pipe)
		1073	&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
		1074	urb->setup_dma = dma_map_single (
		1075	hcd->controller,
		1076	urb->setup_packet,
		1077	sizeof (struct usb_ctrlrequest),
		1078	DMA_TO_DEVICE);
		1079	if (urb->transfer_buffer_length != 0
		1080	&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
		1081	urb->transfer_dma = dma_map_single (
		1082	hcd->controller,
		1083	urb->transfer_buffer,
		1084	urb->transfer_buffer_length,
		1085	usb_pipein (urb->pipe)
		1086	? DMA_FROM_DEVICE
		1087	: DMA_TO_DEVICE);
		1088	}
		1089	status = hcd->driver->urb_enqueue (hcd, urb, mem_flags);
		1090
		1091	done:
		1092	if (status) {
		1093	usb_put_urb (urb);
		1094	urb_unlink (urb);
		1095	}
		1096	return status;
		1097	}
		1098
		1099	/-------------------------------------------------------------------------/
		1100
		1101	/* called in any context */
		1102	static int hcd_get_frame_number (struct usb_device *udev)
		1103	{
		1104	struct usb_hcd hcd = (struct usb_hcd )udev->bus->hcpriv;
		1105	if (!HCD_IS_RUNNING (hcd->state))
		1106	return -ESHUTDOWN;
		1107	return hcd->driver->get_frame_number (hcd);
		1108	}
		1109
		1110	/-------------------------------------------------------------------------/
		1111
		1112	/* this makes the hcd giveback() the urb more quickly, by kicking it
		1113	* off hardware queues (which may take a while) and returning it as
		1114	* soon as practical. we've already set up the urb's return status,
		1115	* but we can't know if the callback completed already.
		1116	*/
		1117	static void
		1118	unlink1 (struct usb_hcd hcd, struct urb urb)
		1119	{
		1120	if (urb == (struct urb *) hcd->rh_timer.data)
		1121	usb_rh_status_dequeue (hcd, urb);
		1122	else {
		1123	int value;
		1124
		1125	/* failures "should" be harmless */
		1126	value = hcd->driver->urb_dequeue (hcd, urb);
		1127	if (value != 0)
		1128	dev_dbg (hcd->controller,
		1129	"dequeue %p --> %d\n",
		1130	urb, value);
		1131	}
		1132	}
		1133
		1134	struct completion_splice { // modified urb context:
		1135	/* did we complete? */
		1136	struct completion done;
		1137
		1138	/* original urb data */
		1139	usb_complete_t complete;
		1140	void *context;
		1141	};
		1142
		1143	static void unlink_complete (struct urb urb, struct pt_regs regs)
		1144	{
		1145	struct completion_splice *splice;
		1146
		1147	splice = (struct completion_splice *) urb->context;
		1148
		1149	/* issue original completion call */
		1150	urb->complete = splice->complete;
		1151	urb->context = splice->context;
		1152	urb->complete (urb, regs);
		1153
		1154	/* then let the synchronous unlink call complete */
		1155	complete (&splice->done);
		1156	}
		1157
		1158	/*
		1159	* called in any context; note ASYNC_UNLINK restrictions
		1160	*
		1161	* caller guarantees urb won't be recycled till both unlink()
		1162	* and the urb's completion function return
		1163	*/
		1164	static int hcd_unlink_urb (struct urb *urb)
		1165	{
		1166	struct hcd_dev *dev;
		1167	struct usb_hcd *hcd = 0;
		1168	struct device *sys = 0;
		1169	unsigned long flags;
		1170	struct completion_splice splice;
1049	mauro	1171	struct list_head tmp; / 2.6.1 */
846	giacomo	1172	int retval;
		1173
		1174	if (!urb)
		1175	return -EINVAL;
		1176
		1177	/*
		1178	* we contend for urb->status with the hcd core,
		1179	* which changes it while returning the urb.
		1180	*
		1181	* Caller guaranteed that the urb pointer hasn't been freed, and
		1182	* that it was submitted. But as a rule it can't know whether or
		1183	* not it's already been unlinked ... so we respect the reversed
		1184	* lock sequence needed for the usb_hcd_giveback_urb() code paths
		1185	* (urb lock, then hcd_data_lock) in case some other CPU is now
		1186	* unlinking it.
		1187	*/
		1188	spin_lock_irqsave (&urb->lock, flags);
		1189	spin_lock (&hcd_data_lock);
		1190
		1191	if (!urb->dev \|\| !urb->dev->bus) {
		1192	retval = -ENODEV;
		1193	goto done;
		1194	}
		1195
		1196	dev = urb->dev->hcpriv;
		1197	sys = &urb->dev->dev;
		1198	hcd = urb->dev->bus->hcpriv;
		1199	if (!dev \|\| !hcd) {
		1200	retval = -ENODEV;
		1201	goto done;
		1202	}
		1203
		1204	/* running ~= hc unlink handshake works (irq, timer, etc)
		1205	* halted ~= no unlink handshake is needed
		1206	* suspended, resuming == should never happen
		1207	*/
		1208	WARN_ON (!HCD_IS_RUNNING (hcd->state) && hcd->state != USB_STATE_HALT);
		1209
1049	mauro	1210	/* insist the urb is still queued */
		1211	list_for_each(tmp, &dev->urb_list) {
		1212	if (tmp == &urb->urb_list)
		1213	break;
		1214	}
		1215	if (tmp != &urb->urb_list) {
		1216	retval = -EINVAL;
		1217	goto done;
		1218	}
		1219
		1220	/* removed for 2.6.1
846	giacomo	1221	if (!urb->hcpriv) {
		1222	retval = -EINVAL;
		1223	goto done;
		1224	}
1049	mauro	1225	*/
846	giacomo	1226
		1227	/* Any status except -EINPROGRESS means something already started to
		1228	* unlink this URB from the hardware. So there's no more work to do.
		1229	*
		1230	* FIXME use better explicit urb state
		1231	*/
		1232	if (urb->status != -EINPROGRESS) {
		1233	retval = -EBUSY;
		1234	goto done;
		1235	}
		1236
		1237	/* PCI IRQ setup can easily be broken so that USB controllers
		1238	* never get completion IRQs ... maybe even the ones we need to
		1239	* finish unlinking the initial failed usb_set_address().
		1240	*/
		1241	if (!hcd->saw_irq) {
		1242	dev_warn (hcd->controller, "Unlink after no-IRQ? "
		1243	"Different ACPI or APIC settings may help."
		1244	"\n");
		1245	hcd->saw_irq = 1;
		1246	}
		1247
		1248	/* maybe set up to block until the urb's completion fires. the
		1249	* lower level hcd code is always async, locking on urb->status
		1250	* updates; an intercepted completion unblocks us.
		1251	*/
		1252	if (!(urb->transfer_flags & URB_ASYNC_UNLINK)) {
		1253	if (in_interrupt ()) {
		1254	dev_dbg (hcd->controller, "non-async unlink in_interrupt");
		1255	retval = -EWOULDBLOCK;
		1256	goto done;
		1257	}
		1258	/* synchronous unlink: block till we see the completion */
		1259	init_completion (&splice.done);
		1260	splice.complete = urb->complete;
		1261	splice.context = urb->context;
		1262	urb->complete = unlink_complete;
		1263	urb->context = &splice;
		1264	urb->status = -ENOENT;
		1265	} else {
		1266	/* asynchronous unlink */
		1267	urb->status = -ECONNRESET;
		1268	}
		1269
		1270	spin_unlock (&hcd_data_lock);
		1271	spin_unlock_irqrestore (&urb->lock, flags);
		1272	// FIXME remove splicing, so this becomes unlink1 (hcd, urb);
		1273	if (urb == (struct urb *) hcd->rh_timer.data) {
		1274	usb_rh_status_dequeue (hcd, urb);
		1275	retval = 0;
		1276	} else {
		1277	retval = hcd->driver->urb_dequeue (hcd, urb);
		1278	/* hcds shouldn't really fail these calls, but... */
		1279	if (retval) {
		1280	dev_dbg (sys, "dequeue %p --> %d\n", urb, retval);
		1281	if (!(urb->transfer_flags & URB_ASYNC_UNLINK)) {
		1282	spin_lock_irqsave (&urb->lock, flags);
		1283	urb->complete = splice.complete;
		1284	urb->context = splice.context;
		1285	spin_unlock_irqrestore (&urb->lock, flags);
		1286	}
		1287	goto bye;
		1288	}
		1289	}
		1290
		1291	/* block till giveback, if needed */
		1292	if (urb->transfer_flags & URB_ASYNC_UNLINK)
		1293	return -EINPROGRESS;
		1294	wait_for_completion (&splice.done);
		1295	return 0;
		1296
		1297	done:
		1298	spin_unlock (&hcd_data_lock);
		1299	spin_unlock_irqrestore (&urb->lock, flags);
		1300	bye:
		1301	if (retval && sys && sys->driver)
		1302	dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
		1303	return retval;
		1304	}
		1305
		1306	/-------------------------------------------------------------------------/
		1307
		1308	/* disables the endpoint: cancels any pending urbs, then synchronizes with
		1309	* the hcd to make sure all endpoint state is gone from hardware. use for
		1310	* set_configuration, set_interface, driver removal, physical disconnect.
		1311	*
		1312	* example: a qh stored in hcd_dev.ep[], holding state related to endpoint
		1313	* type, maxpacket size, toggle, halt status, and scheduling.
		1314	*/
		1315	static void hcd_endpoint_disable (struct usb_device *udev, int endpoint)
		1316	{
		1317	struct hcd_dev *dev;
		1318	struct usb_hcd *hcd;
		1319	struct urb *urb;
		1320	unsigned epnum = endpoint & USB_ENDPOINT_NUMBER_MASK;
		1321
		1322	dev = udev->hcpriv;
		1323	hcd = udev->bus->hcpriv;
		1324
		1325	WARN_ON (!HCD_IS_RUNNING (hcd->state) && hcd->state != USB_STATE_HALT);
		1326
		1327	local_irq_disable ();
		1328
		1329	rescan:
		1330	/* (re)block new requests, as best we can */
		1331	if (endpoint & USB_DIR_IN) {
		1332	usb_endpoint_halt (udev, epnum, 0);
		1333	udev->epmaxpacketin [epnum] = 0;
		1334	} else {
		1335	usb_endpoint_halt (udev, epnum, 1);
		1336	udev->epmaxpacketout [epnum] = 0;
		1337	}
		1338
		1339	/* then kill any current requests */
		1340	spin_lock (&hcd_data_lock);
		1341	list_for_each_entry (urb, &dev->urb_list, urb_list) {
		1342	int tmp = urb->pipe;
		1343
		1344	/* ignore urbs for other endpoints */
		1345	if (usb_pipeendpoint (tmp) != epnum)
		1346	continue;
		1347	/* NOTE assumption that only ep0 is a control endpoint */
		1348	if (epnum != 0 && ((tmp ^ endpoint) & USB_DIR_IN))
		1349	continue;
		1350
		1351	/* another cpu may be in hcd, spinning on hcd_data_lock
		1352	* to giveback() this urb. the races here should be
		1353	* small, but a full fix needs a new "can't submit"
		1354	* urb state.
		1355	*/
		1356	if (urb->status != -EINPROGRESS)
		1357	continue;
		1358	usb_get_urb (urb);
		1359	spin_unlock (&hcd_data_lock);
		1360
		1361	spin_lock (&urb->lock);
		1362	tmp = urb->status;
		1363	if (tmp == -EINPROGRESS)
		1364	urb->status = -ESHUTDOWN;
		1365	spin_unlock (&urb->lock);
		1366
		1367	/* kick hcd unless it's already returning this */
		1368	if (tmp == -EINPROGRESS) {
		1369	tmp = urb->pipe;
		1370	unlink1 (hcd, urb);
		1371	dev_dbg (hcd->controller,
		1372	"shutdown urb %p pipe %08x ep%d%s%s\n",
		1373	urb, tmp, usb_pipeendpoint (tmp),
		1374	(tmp & USB_DIR_IN) ? "in" : "out",
		1375	({ char *s; \
		1376	switch (usb_pipetype (tmp)) { \
		1377	case PIPE_CONTROL: s = ""; break; \
		1378	case PIPE_BULK: s = "-bulk"; break; \
		1379	case PIPE_INTERRUPT: s = "-intr"; break; \
		1380	default: s = "-iso"; break; \
		1381	}; s;}));
		1382	}
		1383	usb_put_urb (urb);
		1384
		1385	/* list contents may have changed */
		1386	goto rescan;
		1387	}
		1388	spin_unlock (&hcd_data_lock);
		1389	local_irq_enable ();
		1390
		1391	/* synchronize with the hardware, so old configuration state
		1392	* clears out immediately (and will be freed).
		1393	*/
		1394	might_sleep ();
		1395	if (hcd->driver->endpoint_disable)
		1396	hcd->driver->endpoint_disable (hcd, dev, endpoint);
		1397	}
		1398
		1399	/-------------------------------------------------------------------------/
		1400
		1401	/* called by khubd, rmmod, apmd, or other thread for hcd-private cleanup.
		1402	* we're guaranteed that the device is fully quiesced. also, that each
		1403	* endpoint has been hcd_endpoint_disabled.
		1404	*/
		1405
		1406	static int hcd_free_dev (struct usb_device *udev)
		1407	{
		1408	struct hcd_dev *dev;
		1409	struct usb_hcd *hcd;
		1410	unsigned long flags;
		1411
		1412	if (!udev \|\| !udev->hcpriv)
		1413	return -EINVAL;
		1414
		1415	if (!udev->bus \|\| !udev->bus->hcpriv)
		1416	return -ENODEV;
		1417
		1418	// should udev->devnum == -1 ??
		1419
		1420	dev = udev->hcpriv;
		1421	hcd = udev->bus->hcpriv;
		1422
		1423	/* device driver problem with refcounts? */
		1424	if (!list_empty (&dev->urb_list)) {
		1425	dev_dbg (hcd->controller, "free busy dev, %s devnum %d (bug!)\n",
		1426	hcd->self.bus_name, udev->devnum);
		1427	return -EINVAL;
		1428	}
		1429
		1430	spin_lock_irqsave (&hcd_data_lock, flags);
		1431	list_del (&dev->dev_list);
		1432	udev->hcpriv = NULL;
		1433	spin_unlock_irqrestore (&hcd_data_lock, flags);
		1434
		1435	kfree (dev);
		1436	return 0;
		1437	}
		1438
		1439	/*
		1440	* usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue)
		1441	*
		1442	* When registering a USB bus through the HCD framework code, use this
		1443	* usb_operations vector. The PCI glue layer does so automatically; only
		1444	* bus glue for non-PCI system busses will need to use this.
		1445	*/
		1446	struct usb_operations usb_hcd_operations = {
		1447	.allocate = hcd_alloc_dev,
		1448	.get_frame_number = hcd_get_frame_number,
		1449	.submit_urb = hcd_submit_urb,
		1450	.unlink_urb = hcd_unlink_urb,
		1451	.deallocate = hcd_free_dev,
		1452	.buffer_alloc = hcd_buffer_alloc,
		1453	.buffer_free = hcd_buffer_free,
		1454	.disable = hcd_endpoint_disable,
		1455	};
		1456	EXPORT_SYMBOL (usb_hcd_operations);
		1457
		1458	/-------------------------------------------------------------------------/
		1459
		1460	/**
		1461	* usb_hcd_giveback_urb - return URB from HCD to device driver
		1462	* @hcd: host controller returning the URB
		1463	* @urb: urb being returned to the USB device driver.
		1464	* @regs: pt_regs, passed down to the URB completion handler
		1465	* Context: in_interrupt()
		1466	*
		1467	* This hands the URB from HCD to its USB device driver, using its
		1468	* completion function. The HCD has freed all per-urb resources
		1469	* (and is done using urb->hcpriv). It also released all HCD locks;
		1470	* the device driver won't cause problems if it frees, modifies,
		1471	* or resubmits this URB.
		1472	*/
		1473	void usb_hcd_giveback_urb (struct usb_hcd hcd, struct urb urb, struct pt_regs *regs)
		1474	{
		1475	urb_unlink (urb);
		1476
		1477	// NOTE: a generic device/urb monitoring hook would go here.
		1478	// hcd_monitor_hook(MONITOR_URB_FINISH, urb, dev)
		1479	// It would catch exit/unlink paths for all urbs.
		1480
		1481
		1482	/* lower level hcd code should use _dma exclusively /
		1483	if (hcd->controller->dma_mask) {
		1484	if (usb_pipecontrol (urb->pipe)
		1485	&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
		1486	pci_unmap_single (hcd->pdev, urb->setup_dma,
		1487	sizeof (struct usb_ctrlrequest),
		1488	PCI_DMA_TODEVICE);
		1489	if (urb->transfer_buffer_length != 0
		1490	&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
		1491	pci_unmap_single (hcd->pdev, urb->transfer_dma,
		1492	urb->transfer_buffer_length,
		1493	usb_pipein (urb->pipe)
		1494	? PCI_DMA_FROMDEVICE
		1495	: PCI_DMA_TODEVICE);
		1496	}
		1497	/* pass ownership to the completion handler */
		1498	urb->complete (urb, regs);
		1499	usb_put_urb (urb);
		1500	}
		1501	EXPORT_SYMBOL (usb_hcd_giveback_urb);
		1502
		1503	/-------------------------------------------------------------------------/
		1504
		1505	/**
		1506	* usb_hcd_irq - hook IRQs to HCD framework (bus glue)
		1507	* @irq: the IRQ being raised
		1508	* @__hcd: pointer to the HCD whose IRQ is beinng signaled
		1509	* @r: saved hardware registers
		1510	*
		1511	* When registering a USB bus through the HCD framework code, use this
		1512	* to handle interrupts. The PCI glue layer does so automatically; only
		1513	* bus glue for non-PCI system busses will need to use this.
		1514	*/
		1515	irqreturn_t usb_hcd_irq (int irq, void __hcd, struct pt_regs r)
		1516	{
		1517	struct usb_hcd *hcd = __hcd;
		1518	int start = hcd->state;
		1519
		1520	if (/unlikely/ (hcd->state == USB_STATE_HALT)) /* irq sharing? */
		1521	return IRQ_NONE;
		1522
		1523	hcd->saw_irq = 1;
		1524	hcd->driver->irq (hcd, r);
		1525	if (hcd->state != start && hcd->state == USB_STATE_HALT)
		1526	usb_hc_died (hcd);
		1527	return IRQ_HANDLED;
		1528	}
		1529	EXPORT_SYMBOL (usb_hcd_irq);
		1530
		1531	/-------------------------------------------------------------------------/
		1532
		1533	static void hcd_panic (void *_hcd)
		1534	{
		1535	struct usb_hcd *hcd = _hcd;
		1536	struct usb_device *hub = hcd->self.root_hub;
		1537	unsigned i;
		1538
		1539	/* hc's root hub is removed later removed in hcd->stop() */
		1540	hub->state = USB_STATE_NOTATTACHED;
		1541	for (i = 0; i < hub->maxchild; i++) {
		1542	if (hub->children [i])
		1543	usb_disconnect (&hub->children [i]);
		1544	}
		1545	}
		1546
		1547	/**
		1548	* usb_hc_died - report abnormal shutdown of a host controller (bus glue)
		1549	* @hcd: pointer to the HCD representing the controller
		1550	*
		1551	* This is called by bus glue to report a USB host controller that died
		1552	* while operations may still have been pending. It's called automatically
		1553	* by the PCI glue, so only glue for non-PCI busses should need to call it.
		1554	*/
		1555	void usb_hc_died (struct usb_hcd *hcd)
		1556	{
		1557	dev_err (hcd->controller, "HC died; cleaning up\n");
		1558
		1559	/* clean up old urbs and devices; needs a task context */
		1560	INIT_WORK (&hcd->work, hcd_panic, hcd);
		1561	(void) schedule_work (&hcd->work);
		1562	}
		1563	EXPORT_SYMBOL (usb_hc_died);
		1564

Subversion Repositories shark

(root)/shark/trunk/drivers/usb/core/hcd.c - Rev 1049