/shark/branches/xen/kernel/Makefile |
---|
14,6 → 14,7 |
kill.o \ |
init.o \ |
int_sem.o \ |
mem/ \ |
mem.o \ |
mqueue.o \ |
mutex.o \ |
/shark/branches/xen/kernel/mem/Makefile |
---|
1,20 → 1,5 |
# The List-based Memory Manager (from OSKit!) |
ifndef BASE |
BASE=../.. |
endif |
include $(BASE)/config/config.mk |
LIBRARY = mem |
OBJS_PATH = $(BASE)/kernel/mem |
# |
# Object files |
# |
OBJS = addfree.o \ |
targets:= \ |
addfree.o \ |
addregio.o \ |
alloc.o \ |
alloc_al.o \ |
30,5 → 15,3 |
removefr.o \ |
stats.o |
include $(BASE)/config/lib.mk |
/shark/branches/xen/Rules.mk |
---|
0,0 → 1,197 |
# Shark-specific bits of the build system. |
# Include the configuration file. |
topdir=$(if $(S),$(S),$(srctree)) |
include $(topdir)/shark.cfg |
# Those are the targets used to build all the libraries that compose |
# the system. This is the only point (except local Makefiles, of course, |
# that need to be added as needed) that has to be modified to add new files |
# or directories to the main system. |
# $(TARGETS) is the list of the main targets used to build the system, |
# it contains all the directories recursed by the main Makefile, and the |
# special target libgkern.a, that contains the base system. To add a |
# directory that specifies its own libraries simply put it in $(TARGETS). |
TARGETS= libgkern.a drivers/ libc/ ports/ tracer/ $(fs-$(SHARK_FS)) |
# $(LIBGKERN-OBJS) is the list of targets that compose libgkern.a. To |
# add a directory to it, simply put it here. The generic kernel used to |
# be separed from the oslib and from the modules, but that hardly made |
# sense for a Shark application, as all those three components are needed |
# for it to run. |
LIBGKERN-OBJS= arch/$(ARCH)/ kernel/ modules/ |
# Handle Shark configuration. Really insane, indeed, btw there should |
# not be the need to modify anything below this point in the file to |
# handle common maintainance tasks. |
options:=TSC APIC BIOS TRACER FG FB COMPILER |
define strip-in-place |
$(1):=$(strip $($(1))) |
endef |
$(foreach cfgopt,$(options),$(eval $(call strip-in-place,$(cfgopt)))) |
cpp-tsc-TRUE:= -D__TSC__ |
cpp-apic-TRUE:= -D__APIC__ |
cpp-bios-VM86:= -DVM86 |
cpp-tracer-NEW:= -D__NEW_TRACER__ |
cpp-tracer-OLD:= -D__OLD_TRACER__ |
cpp-fg-FORCE_PXC:= -D__FORCE_PXC__ |
cpp-fb-VESA:= -DCONFIG_FB_VESA -DCONFIG_LOGO |
cpp-fb-FINDPCI:= -DCONFIG_FB_RIVA -DCONFIG_FB_RADEON -DCONFIG_FB_MATROX \ |
-DCONFIG_LOGO -DCONFIG_FB_MATROX_G100 \ |
-DCONFIG_FB_MATROX_MILLENIUM -DCONFIG_FB_MATROX_MYSTIQUE |
cpp-fb-VGA16:= -DCONFIG_FB_VGA16 |
include-dirs:= \ |
-I$(topdir)/include -I$(topdir)/modules \ |
-I$(topdir)/arch/$(ARCH)/include/arch \ |
-I$(topdir)/libc/arch/$(ARCH)/include \ |
-I$(topdir)/tracer/include |
config:= -D__LINUX__ \ |
$(cpp-tsc-$(TSC)) $(cpp-apic-$(APIC)) $(cpp-bios-$(BIOS)) \ |
$(cpp-tracer-$(TRACER)) $(cpp-fg-$(FG)) $(cpp-fb-$(FB)) |
exported-cppflags:= $(include-dirs) $(config) |
exported-aflags:= -x assembler-with-cpp $(include-dirs) $(config) |
cc-compiler-GCC4:= -Wimplicit-function-declaration -Wno-attributes \ |
-Wno-pointer-sign -Wall -O -fno-builtin -nostdinc \ |
-minline-all-stringops -fno-stack-protector |
cc-compiler-GCC3:= -Wimplicit-function-declaration -Wall -O \ |
-fno-builtin -nostdinc -minline-all-stringops |
cc-compiler-DJGPP:= -Wimplicit-function-declaration -Wall -O \ |
-fno-builtin -nostdinc -minline-all-stringops |
exported-cflags:= $(cc-compiler-$(COMPILER)) |
fs-YES:= fs/ |
ifndef APP |
# If we are not building an application, just build the system libraries. |
targets:= $(TARGETS) |
libgkern.a-objs:= $(LIBGKERN-OBJS) |
all: install |
else |
# Rules to build a Shark application. The following variables are used: |
# APP: the application to build. |
# INIT: the initialization object file. |
# OTHEROBJS: other objects to be linked to the application. |
# OTHERLIBS: other libraries to be linked to the application. |
# OTHERINCL: additional preprocessor flags for the app and its |
# additional objects. |
# SHARKOPT: options to specify which Shark components are to be |
# linked to the application. |
# Directory where we search for the compiled Shark libraries. |
libs-dir:= $(if $(B),$(B)/.lib,$(if $(S),$(S)/.lib,\ |
$(if $(BASE),$(BASE)/.lib,../../.lib))) |
ifeq ($(wildcard $(libs-dir)),) |
$(error Cannod find Shark build directory) |
endif |
# Handle $(SHARKOPT). Always link the generic kernel and the architecture |
# support code, as they're needed for the application to run. Link the |
# libc too, as we still don't have proper interface separation. |
# XXX Bring back tracer and filesystem. |
# XXX The old build system included also the ports and other libs... |
app-libs:= -lgkern -lc -lcons -lserial |
app-cppflags:= -I$(topdir)/drivers/linuxc26/include\ |
-I$(topdir)/drivers/cons/include |
wants-option=$(if $(filter $(1),$(uselib)),y) |
use-zlib-y:= __ZLIB__ |
uselib:= $(SHARKOPT) |
# PCI |
libs-__PCI__-y:= -lpci |
cppflags-__PCI__-y:= -I$(topdir)/drivers/pci/include |
# Network |
libs-__NET__-y:= -lnet |
cppflags-__NET__-y:= -I$(topdir)/drivers/net/include |
# grx |
libs-__GRX__-y:= -lgrx |
cppflags-__GRX__-y:= -I$(topdir)/drivers/grx/include |
# Framebuffer |
libs-__FB__-y:= -lfb |
cppflags-__FB__-y:= -I$(topdir)/drivers/fb/include |
# Oldchar |
libs-__OLDCHAR__-y:= -loldch |
cppflags-__OLDCHAR__-y:= -I$(topdir)/drivers/oldchar/include |
# Linux compatibility layer |
libs-__LINUXC26__-y:= -lcomp26 |
# PCL833 |
libs-__PCL833__-y:= -lpcl833 |
cppflags-__PCL833__-y:= -I$(topdir)/drivers/pcl833/include |
# Parport |
libs-__PPORT__-y:= -lpport |
cppflags-__PPORT__-y:= -I$(topdir)/drivers/parport/include |
# PCLAB |
libs-__PCLAB__-y:= -lpclab |
cppflags-__PCLAB__-y:= -I$(topdir)/drivers/pcl812/include |
# BTTV |
libs-__BTTV__-y:= -lbttv |
cppflags-__BTTV__-y:= -I$(topdir)/drivers/bttv/include |
# Input |
libs-__INPUT__-y:= -linput |
cppflags-__INPUT__-y:= -I$(topdir)/drivers/input/include |
# CPU |
libs-__CPU__-y:= -lcpu |
cppflags-__CPU__-y:= -I$(topdir)/drivers/cpu/include |
# USB |
libs-__USB__-y:= -lusb |
cppflags-__USB__-y:= -I$(topdir)/drivers/usb/include |
# I2C |
libs-__I2C__-y:= -li2c |
cppflags-__I2C__-y:= -I$(topdir)/drivers/i2c/include |
# 6025e |
libs-__6025E__-y:= -l6025e |
cppflags-__6025E__-y:= -I$(topdir)/drivers/pci6025e/include |
# Mesa |
libs-__OSMESA__-y:= -losmesa -lglut -lglu |
cppflags-__OSMESA__-y:= -I$(topdir)/ports/mesa/include |
# Servo |
libs-__SERVO__-y:= -lservo |
cppflags-__SERVO__-y:= -I$(topdir)/ports/servo/include |
# TFTP |
libs-__TFTP__-y:= -ltftp |
cppflags-__TFTP__-y:= -I$(topdir)/ports/tftp/include |
libs-tracer-OLD:= -ltracer -lnet -lpci -lcomp26 |
libs-tracer-NEW:= $(libs-tracer-OLD) |
options= __PCI__ __NET__ __GRX__ __FB__ __OLDCHAR__ __LINUXC26__ __PCL833__\ |
__PPORT__ __PCLAB__ __BTTV__ __INPUT__ __CPU__ __USB__ __I2C__ \ |
__6025E__ __OSMESA__ __SERVO__ __TFTP__ |
app-libs+= $(foreach opt,$(options),$(libs-$(opt)-$(call wants-option,$(opt)))) |
app-cppflags+= $(foreach opt,$(options),$(cppflags-$(opt)-$(call\ |
wants-option,$(opt)))) |
app-libs+= $(libs-tracer-$(TRACER)) |
targets:= $(APP) |
$(APP)-objs:= $(APP).o $(OTHEROBJS) |
$(APP)-startup:= $(libs-dir)/x0.o |
$(APP)-cppflags+= $(OTHERINCL) $(app-cppflags) |
$(APP)-ldflags+= -Bstatic -Ttext $(MEM_START) -s -nostartfiles -nostdlib\ |
-L$(libs-dir) --start-group $(sort $(app-libs)) $(OTHERLIBS) --end-group |
endif |
/shark/branches/xen/mk/App.mk |
---|
0,0 → 1,69 |
# Copyright (c) 2008 Fabio Checconi <fabio@gandalf.sssup.it> |
# |
# Helper file defining standard targets for Shark applications. It should |
# be included from the application makefiles in this way (preserving much |
# of the old behavior): |
# |
# # Example of Shark application makefile. |
# S?=<source tree> |
# B?=<build tree, if different from $(S)> |
# |
# SUBDIRS:= <list of subdirectories> |
# APPS:= <list of applications> |
# |
# include $(S)/mk/App.mk |
# |
# # For each <application>: |
# <application>: |
# make -f $(S)/Makefile APP=<application> \ |
# OTHEROBJS="<list of objects>" \ |
# OTHERINCL="<list of extra include dirs>" \ |
# SHARKOPT="<list of options>" |
# |
# # End of Shark application makefile example. |
# |
ifndef S |
$(error Missing Shark source tree specification) |
endif |
define subdir-templ |
.PHONY: $(1)-$(2) |
$(1)-$(2): |
make -C $(1) $(2) |
endef |
define export-if-defined |
ifdef $(1) |
export $(1) |
endif |
endef |
to-be-exported:= S B O CROSS_COMPILE AR CC LD RM INSTALL V |
$(foreach v, $(to-be-exported),$(eval $(call export-if-defined,$(v)))) |
foreach-subdir=$(foreach d, $(SUBDIRS),$(eval $(call subdir-templ,$d,$1))) |
# The default target: build all subdirs and all the applications in the |
# current directory. |
.PHONY: all |
all: subdirs $(APPS) |
# Build subdirs before applications. |
$(APPS): subdirs |
.PHONY: subdirs |
# Build all the subdirs |
$(call foreach-subdir,all) |
subdirs: $(addsuffix -all,$(SUBDIRS)) |
.PHONY: clean |
$(call foreach-subdir,clean) |
clean: $(addsuffix -clean,$(SUBDIRS)) |
rm -f *.o $(APPS) |
.PHONY: distclean |
$(call foreach-subdir,distclean) |
distclean: clean $(addsuffix -distclean,$(SUBDIRS)) |
rm -f .*.deps |
/shark/branches/xen/ports/mesa/src-glut.dos/Makefile |
---|
1,21 → 1,18 |
# The Frame Buffer Device |
targets:= libglut.a |
ifndef BASE |
BASE=../../.. |
endif |
libglut.a-objs:= \ |
bitmap.o \ |
color.o \ |
globals.o \ |
models.o \ |
teapot.o \ |
window.o \ |
callback.o \ |
init.o \ |
menu.o \ |
overlay.o \ |
state.o |
include $(BASE)/config/config.mk |
cppflags+= -I$(srctree)/drivers/linuxc26/include -I$(curdir)/../include \ |
-I$(curdir) -I$(curdir)/../ |
LIBRARY = glut |
OBJS_PATH = $(BASE)/ports/mesa/src-glut.dos/ |
GLUT = bitmap.o color.o globals.o models.o teapot.o\ |
window.o callback.o init.o menu.o overlay.o state.o |
OBJS = $(GLUT) |
C_OPT += -I../../../drivers/linuxc26/include -I../include -I. -I.. |
include $(BASE)/config/lib.mk |
/shark/branches/xen/ports/mesa/src/tnl/Makefile |
---|
0,0 → 1,24 |
targets:= \ |
t_array_api.o \ |
t_import_array.o \ |
t_context.o \ |
t_eval_api.o \ |
t_imm_alloc.o \ |
t_imm_api.o \ |
t_imm_debug.o \ |
t_imm_dlist.o \ |
t_imm_elt.o \ |
t_imm_eval.o \ |
t_imm_exec.o \ |
t_imm_fixup.o \ |
t_pipeline.o \ |
t_vb_fog.o \ |
t_vb_light.o \ |
t_vb_normals.o \ |
t_vb_points.o \ |
t_vb_program.o \ |
t_vb_render.o \ |
t_vb_gentex.o \ |
t_vb_texmat.o \ |
t_vb_vertex.o |
/shark/branches/xen/ports/mesa/src/math/Makefile |
---|
0,0 → 1,10 |
targets:= \ |
m_clip_debug.o \ |
m_norm_debug.o \ |
m_xform_debug.o \ |
m_eval.o \ |
m_matrix.o \ |
m_translate.o \ |
m_vector.o \ |
m_xform.o |
/shark/branches/xen/ports/mesa/src/swrast/Makefile |
---|
0,0 → 1,30 |
targets:= \ |
s_aaline.o \ |
s_aatriangle.o \ |
s_accum.o \ |
s_alphabuf.o \ |
s_alpha.o \ |
s_bitmap.o \ |
s_blend.o \ |
s_buffers.o \ |
s_context.o \ |
s_copypix.o \ |
s_depth.o \ |
s_drawpix.o \ |
s_feedback.o \ |
s_fog.o \ |
s_histogram.o \ |
s_imaging.o \ |
s_lines.o \ |
s_logic.o \ |
s_masking.o \ |
s_pixeltex.o \ |
s_points.o \ |
s_readpix.o \ |
s_span.o \ |
s_stencil.o \ |
s_texstore.o \ |
s_texture.o \ |
s_triangle.o \ |
s_zoom.o |
/shark/branches/xen/ports/mesa/src/array_cache/Makefile |
---|
0,0 → 1,2 |
targets:= ac_context.o ac_import.o |
/shark/branches/xen/ports/mesa/src/Makefile |
---|
1,50 → 1,71 |
# The Frame Buffer Device |
targets:= libosmesa.a |
ifndef BASE |
BASE=../../.. |
endif |
libosmesa.a-objs:= \ |
accum.o \ |
api_arrayelt.o \ |
api_eval.o \ |
api_loopback.o \ |
api_noop.o \ |
api_validate.o \ |
attrib.o \ |
blend.o \ |
buffers.o \ |
clip.o \ |
colortab.o \ |
context.o \ |
convolve.o \ |
debug.o \ |
depth.o \ |
dispatch.o \ |
dlist.o \ |
drawpix.o \ |
enable.o \ |
enums.o \ |
eval.o \ |
extensions.o \ |
feedback.o \ |
fog.o \ |
get.o \ |
glapi.o \ |
glthread.o \ |
hash.o \ |
hint.o \ |
histogram.o \ |
image.o \ |
light.o \ |
lines.o \ |
matrix.o \ |
mmath.o \ |
pixel.o \ |
points.o \ |
polygon.o \ |
rastpos.o \ |
state.o \ |
stencil.o \ |
texcompress.o \ |
texformat.o \ |
teximage.o \ |
texobj.o \ |
texstate.o \ |
texstore.o \ |
texutil.o \ |
varray.o \ |
vpexec.o \ |
vpparse.o \ |
vpstate.o \ |
vtxfmt.o \ |
array_cache/ \ |
swrast/ \ |
swrastst/ \ |
tnl/ \ |
math/ \ |
x86/ \ |
osmesa/ \ |
imports.o |
include $(BASE)/config/config.mk |
exported-aflags:= -I$(srctree)/drivers/linuxc26/include/asm \ |
-I$(srctree)/ports/mesa/include |
LIBRARY = osmesa |
exported-cppflags:= -I$(srctree)/drivers/linuxc26/include \ |
-I$(srctree)/ports/mesa/include -I$(srctree)/ports/mesa/src |
OBJS_PATH = $(BASE)/ports/mesa/src/ |
OSMESA = accum.o api_arrayelt.o api_eval.o api_loopback.o api_noop.o api_validate.o\ |
attrib.o blend.o buffers.o clip.o colortab.o context.o convolve.o\ |
debug.o depth.o dispatch.o dlist.o drawpix.o enable.o enums.o eval.o\ |
extensions.o feedback.o fog.o get.o glapi.o glthread.o hash.o hint.o\ |
histogram.o image.o light.o lines.o matrix.o mmath.o pixel.o\ |
points.o polygon.o rastpos.o state.o stencil.o texcompress.o texformat.o\ |
teximage.o texobj.o texstate.o texstore.o texutil.o varray.o vpexec.o\ |
vpparse.o vpstate.o vtxfmt.o ./array_cache/ac_context.o\ |
./array_cache/ac_import.o ./swrast/s_aaline.o ./swrast/s_aatriangle.o\ |
./swrast/s_accum.o ./swrast/s_alphabuf.o ./swrast/s_alpha.o ./swrast/s_bitmap.o\ |
./swrast/s_blend.o ./swrast/s_buffers.o ./swrast/s_context.o ./swrast/s_copypix.o\ |
./swrast/s_depth.o ./swrast/s_drawpix.o ./swrast/s_feedback.o ./swrast/s_fog.o\ |
./swrast/s_histogram.o ./swrast/s_imaging.o ./swrast/s_lines.o ./swrast/s_logic.o\ |
./swrast/s_masking.o ./swrast/s_pixeltex.o ./swrast/s_points.o ./swrast/s_readpix.o\ |
./swrast/s_span.o ./swrast/s_stencil.o ./swrast/s_texstore.o ./swrast/s_texture.o\ |
./swrast/s_triangle.o ./swrast/s_zoom.o ./swrastst/ss_context.o\ |
./swrastst/ss_triangle.o ./swrastst/ss_vb.o ./tnl/t_array_api.o\ |
./tnl/t_import_array.o ./tnl/t_context.o ./tnl/t_eval_api.o ./tnl/t_imm_alloc.o\ |
./tnl/t_imm_api.o ./tnl/t_imm_debug.o ./tnl/t_imm_dlist.o ./tnl/t_imm_elt.o\ |
./tnl/t_imm_eval.o ./tnl/t_imm_exec.o ./tnl/t_imm_fixup.o ./tnl/t_pipeline.o\ |
./tnl/t_vb_fog.o ./tnl/t_vb_light.o\ |
./tnl/t_vb_normals.o ./tnl/t_vb_points.o ./tnl/t_vb_program.o ./tnl/t_vb_render.o\ |
./tnl/t_vb_gentex.o ./tnl/t_vb_texmat.o ./tnl/t_vb_vertex.o\ |
./math/m_clip_debug.o ./math/m_norm_debug.o\ |
./math/m_xform_debug.o ./math/m_eval.o ./math/m_matrix.o ./math/m_translate.o\ |
./math/m_vector.o ./math/m_xform.o\ |
./x86/asm_common_x86.o ./x86/common_x86.o ./x86/glapi_x86.o\ |
./x86/mmx_blend.o ./x86/x86.o ./x86/x86_cliptest.o ./x86/xform2_x86.o\ |
./x86/xform3_x86.o ./x86/xform4_x86.o ./osmesa/osmesa.o imports.o \ |
OBJS = $(OSMESA) |
C_OPT += -I../../../drivers/linuxc26/include -I../include -I. -I.. |
ASM_OPT += -I../../../drivers/linuxc26/include/asm -I../include -I. -I.. |
include $(BASE)/config/lib.mk |
/shark/branches/xen/ports/mesa/src/swrastst/Makefile |
---|
0,0 → 1,2 |
targets:= ss_context.o ss_triangle.o ss_vb.o |
/shark/branches/xen/ports/mesa/src/x86/Makefile |
---|
0,0 → 1,11 |
targets:= \ |
asm_common_x86.o \ |
common_x86.o \ |
glapi_x86.o \ |
mmx_blend.o \ |
x86.o \ |
x86_cliptest.o \ |
xform2_x86.o \ |
xform3_x86.o \ |
xform4_x86.o |
/shark/branches/xen/ports/mesa/src/osmesa/Makefile |
---|
0,0 → 1,2 |
targets:= osmesa.o |
/shark/branches/xen/ports/mesa/src-glu/Makefile |
---|
1,21 → 1,18 |
# The Frame Buffer Device |
targets:= libglu.a |
ifndef BASE |
BASE=../../.. |
endif |
libglu.a-objs:= \ |
glu.o \ |
mipmap.o \ |
nurbs.o \ |
nurbsutl.o \ |
project.o \ |
tess.o \ |
nurbscrv.o \ |
nurbssrf.o \ |
polytest.o \ |
quadric.o \ |
tesselat.o |
include $(BASE)/config/config.mk |
cppflags+= -I$(srctree)/drivers/linuxc26/include -I$(curdir)/../include \ |
-I$(curdir) -I$(curdir)/../ |
LIBRARY = glu |
OBJS_PATH = $(BASE)/ports/mesa/src-glu/ |
GLU = glu.o mipmap.o nurbs.o nurbsutl.o project.o tess.o\ |
nurbscrv.o nurbssrf.o polytest.o quadric.o tesselat.o |
OBJS = $(GLU) |
C_OPT += -I../../../drivers/linuxc26/include -I../include -I. -I.. |
include $(BASE)/config/lib.mk |
/shark/branches/xen/ports/mesa/Makefile |
---|
1,43 → 1,5 |
targets:= \ |
src/ \ |
src-glu/ \ |
src-glut.dos/ |
dirs := $(filter-out CVS cvs makefile readme include, $(wildcard *)) |
p_all := $(addprefix prefixall_, $(dirs)) |
p_install := $(addprefix prefixinstall_, $(dirs)) |
p_clean := $(addprefix prefixclean_, $(dirs)) |
pcleanall := $(addprefix prefixcleanall_, $(dirs)) |
pdepend := $(addprefix prefixdepend_, $(dirs)) |
.PHONY: all install clean cleanall depend |
install: $(p_install) |
all: $(p_all) |
clean: $(p_clean) |
cleanall: $(p_cleanall) |
depend: $(pdepend) |
prefixinstall_%: |
make -C $* install |
prefixall_%: |
make -C $* all |
prefixclean_%: |
make -C $* clean |
prefixcleanall_%: |
make -C $* cleanall |
prefixdepend_%: |
make -C $* depend |
/shark/branches/xen/ports/Makefile |
---|
1,0 → 0,0 |
targets:= |
targets:= mesa/ servo/ tftp/ |
/shark/branches/xen/ports/tftp/Makefile |
---|
1,20 → 1,6 |
# TFTP |
targets:= libtftp.a |
ifndef BASE |
BASE=../.. |
endif |
libtftp.a-objs:= tftp.o endn.o |
include $(BASE)/config/config.mk |
cppflags+= -I$(srctree)/ports/tftp/include -I$(srctree)/drivers/net/include/ |
LIBRARY = tftp |
OBJS_PATH = $(BASE)/ports/tftp |
OBJS = tftp.o endn.o |
OTHERINCL += -I$(BASE)/ports/tftp/include -I$(BASE)/drivers/net/include/ |
include $(BASE)/config/lib.mk |
clean:: |
rm -f *.o |
/shark/branches/xen/ports/servo/Makefile |
---|
1,20 → 1,6 |
# Servo Control |
targets:= libservo.a |
ifndef BASE |
BASE=../.. |
endif |
libservo.a-objs:= servo.o |
include $(BASE)/config/config.mk |
cppflags+= -I$(curdir)/include -I$(curdir) -I$(srctree)/drivers/serial/include |
LIBRARY = servo |
OBJS_PATH = $(BASE)/ports/servo |
SERVO = servo.o |
OBJS = $(SERVO) |
C_OPT += -I./include -I. -I$(BASE)/drivers/serial/include |
include $(BASE)/config/lib.mk |
/shark/branches/xen/libc/utsname/Makefile |
---|
1,2 → 1,2 |
targets:= utsname.c |
targets:= utsname.o |
/shark/branches/xen/libc/arch/x86/stdlib/Makefile |
---|
3,7 → 3,5 |
stdlib.o \ |
strtod.o \ |
strtoi.o \ |
strtol.o \ |
strtou.o \ |
strtoul.o |
strtou.o |
/shark/branches/xen/libc/arch/x86/libm/msun/src/Makefile |
---|
1,166 → 1,139 |
targets:=$(addsuffix .o,$(filter-out $(patsubst %.s,%,$(wildcard ../*.s)), \ |
$(patsubst %.c,%,$(wildcard *.c)))) |
targets:= \ |
e_acosf.o \ |
e_acosh.o \ |
e_acoshf.o \ |
e_asinf.o \ |
e_atan2f.o \ |
e_atanh.o \ |
e_atanhf.o \ |
e_cosh.o \ |
e_coshf.o \ |
e_expf.o \ |
e_fmod.o \ |
e_fmodf.o \ |
e_gamf1.o \ |
e_gamma.o \ |
e_gamma_.o \ |
e_gammaf.o \ |
e_hypot.o \ |
e_hypotf.o \ |
e_j0.o \ |
e_j0f.o \ |
e_j1.o \ |
e_j1f.o \ |
e_jn.o \ |
e_jnf.o \ |
e_lgam1.o \ |
e_lgam2.o \ |
e_lgam3.o \ |
e_lgamma.o \ |
e_log10f.o \ |
e_logf.o \ |
e_pow.o \ |
e_powf.o \ |
e_rem1.o \ |
e_rem2.o \ |
e_rem_pi.o \ |
e_scalbf.o \ |
e_sinh.o \ |
e_sinhf.o \ |
e_sqrtf.o \ |
k_cos.o \ |
k_cosf.o \ |
k_rem1.o \ |
k_rem_pi.o \ |
k_sin.o \ |
k_sinf.o \ |
k_standa.o \ |
k_tan.o \ |
k_tanf.o \ |
s_asinh.o \ |
s_asinhf.o \ |
s_atanf.o \ |
s_cbrt.o \ |
s_cbrtf.o \ |
s_ceilf.o \ |
s_copy1.o \ |
s_cosf.o \ |
s_erf.o \ |
s_erff.o \ |
s_expm1.o \ |
s_expm1f.o \ |
s_fabs.o \ |
s_fabsf.o \ |
s_fini1.o \ |
s_floorf.o \ |
s_frexp.o \ |
s_frexpf.o \ |
s_ilogbf.o \ |
s_isnan.o \ |
s_isnanf.o \ |
s_ldexp.o \ |
s_ldexpf.o \ |
s_lib_ve.o \ |
s_log1pf.o \ |
s_logbf.o \ |
s_mather.o \ |
s_modf.o \ |
s_modff.o \ |
s_next1.o \ |
s_nextaf.o \ |
s_rintf.o \ |
s_scal1.o \ |
s_sign1.o \ |
s_signga.o \ |
s_sinf.o \ |
s_tanf.o \ |
s_tanh.o \ |
s_tanhf.o \ |
w_acos.o \ |
w_acosf.o \ |
w_acosh.o \ |
w_acoshf.o \ |
w_asin.o \ |
w_asinf.o \ |
w_atan2.o \ |
w_atan2f.o \ |
w_atanh.o \ |
w_atanhf.o \ |
w_cabs.o \ |
w_cabsf.o \ |
w_cosh.o \ |
w_coshf.o \ |
w_drem.o \ |
w_dremf.o \ |
w_exp.o \ |
w_expf.o \ |
w_fmod.o \ |
w_fmodf.o \ |
w_gamf1.o \ |
w_gamma.o \ |
w_gamma_.o \ |
w_gammaf.o \ |
w_hypot.o \ |
w_hypotf.o \ |
w_j0.o \ |
w_j0f.o \ |
w_j1.o \ |
w_j1f.o \ |
w_jn.o \ |
w_jnf.o \ |
w_lgam1.o \ |
w_lgam2.o \ |
w_lgam3.o \ |
w_lgamma.o \ |
w_log.o \ |
w_log10.o \ |
w_log10f.o \ |
w_logf.o \ |
w_pow.o \ |
w_powf.o \ |
w_rem1.o \ |
w_remain.o \ |
w_scalb.o \ |
w_scalbf.o \ |
w_sinh.o \ |
w_sinhf.o \ |
w_sqrt.o \ |
w_sqrtf.o |
# |
# \ |
# e_acos.o \ |
# e_acosf.o \ |
# e_acosh.o \ |
# e_acoshf.o \ |
# e_asin.o \ |
# e_asinf.o \ |
# e_atan2.o \ |
# e_atan2f.o \ |
# e_atanh.o \ |
# e_atanhf.o \ |
# e_cosh.o \ |
# e_coshf.o \ |
# e_exp.o \ |
# e_expf.o \ |
# e_fmod.o \ |
# e_fmodf.o \ |
# e_gamf1.o \ |
# e_gamma.o \ |
# e_gamma_.o \ |
# e_gammaf.o \ |
# e_hypot.o \ |
# e_hypotf.o \ |
# e_j0.o \ |
# e_j0f.o \ |
# e_j1.o \ |
# e_j1f.o \ |
# e_jn.o \ |
# e_jnf.o \ |
# e_lgam1.o \ |
# e_lgam2.o \ |
# e_lgam3.o \ |
# e_lgamma.o \ |
# e_log.o \ |
# e_log10.o \ |
# e_log10f.o \ |
# e_logf.o \ |
# e_pow.o \ |
# e_powf.o \ |
# e_rem1.o \ |
# e_rem2.o \ |
# e_rem_pi.o \ |
# e_remain.o \ |
# e_scalb.o \ |
# e_scalbf.o \ |
# e_sinh.o \ |
# e_sinhf.o \ |
# e_sqrt.o \ |
# e_sqrtf.o \ |
# k_cos.o \ |
# k_cosf.o \ |
# k_rem1.o \ |
# k_rem_pi.o \ |
# k_sin.o \ |
# k_sinf.o \ |
# k_standa.o \ |
# k_tan.o \ |
# k_tanf.o \ |
# s_asinh.o \ |
# s_asinhf.o \ |
# s_atan.o \ |
# s_atanf.o \ |
# s_cbrt.o \ |
# s_cbrtf.o \ |
# s_ceil.o \ |
# s_ceilf.o \ |
# s_copy1.o \ |
# s_copysi.o \ |
# s_cos.o \ |
# s_cosf.o \ |
# s_erf.o \ |
# s_erff.o \ |
# s_expm1.o \ |
# s_expm1f.o \ |
# s_fabs.o \ |
# s_fabsf.o \ |
# s_fini1.o \ |
# s_finite.o \ |
# s_floor.o \ |
# s_floorf.o \ |
# s_frexp.o \ |
# s_frexpf.o \ |
# s_ilogb.o \ |
# s_ilogbf.o \ |
# s_isnan.o \ |
# s_isnanf.o \ |
# s_ldexp.o \ |
# s_ldexpf.o \ |
# s_lib_ve.o \ |
# s_log1p.o \ |
# s_log1pf.o \ |
# s_logb.o \ |
# s_logbf.o \ |
# s_mather.o \ |
# s_modf.o \ |
# s_modff.o \ |
# s_next1.o \ |
# s_nextaf.o \ |
# s_rint.o \ |
# s_rintf.o \ |
# s_scal1.o \ |
# s_scalbn.o \ |
# s_sign1.o \ |
# s_signga.o \ |
# s_signif.o \ |
# s_sin.o \ |
# s_sinf.o \ |
# s_tan.o \ |
# s_tanf.o \ |
# s_tanh.o \ |
# s_tanhf.o \ |
# w_acos.o \ |
# w_acosf.o \ |
# w_acosh.o \ |
# w_acoshf.o \ |
# w_asin.o \ |
# w_asinf.o \ |
# w_atan2.o \ |
# w_atan2f.o \ |
# w_atanh.o \ |
# w_atanhf.o \ |
# w_cabs.o \ |
# w_cabsf.o \ |
# w_cosh.o \ |
# w_coshf.o \ |
# w_drem.o \ |
# w_dremf.o \ |
# w_exp.o \ |
# w_expf.o \ |
# w_fmod.o \ |
# w_fmodf.o \ |
# w_gamf1.o \ |
# w_gamma.o \ |
# w_gamma_.o \ |
# w_gammaf.o \ |
# w_hypot.o \ |
# w_hypotf.o \ |
# w_j0.o \ |
# w_j0f.o \ |
# w_j1.o \ |
# w_j1f.o \ |
# w_jn.o \ |
# w_jnf.o \ |
# w_lgam1.o \ |
# w_lgam2.o \ |
# w_lgam3.o \ |
# w_lgamma.o \ |
# w_log.o \ |
# w_log10.o \ |
# w_log10f.o \ |
# w_logf.o \ |
# w_pow.o \ |
# w_powf.o \ |
# w_rem1.o \ |
# w_remain.o \ |
# w_scalb.o \ |
# w_scalbf.o \ |
# w_sinh.o \ |
# w_sinhf.o \ |
# w_sqrt.o \ |
# w_sqrtf.o |
# |
/shark/branches/xen/libc/arch/x86/libm/msun/i387/Makefile |
---|
3,7 → 3,6 |
e_asin.o \ |
e_atan2.o \ |
e_exp.o \ |
e_fmod.o \ |
e_log.o \ |
e_log10.o \ |
e_remain.o \ |
/shark/branches/xen/libc/arch/x86/libm/machine/Makefile |
---|
1,2 → 1,2 |
targets:= infinity.o |
targets:= stub.o |
/shark/branches/xen/libc/arch/x86/Makefile |
---|
1,4 → 1,4 |
targets:= modf.o reboot.o ioformat/ libm/ stdlib/ string/ |
targets:= reboot.o ioformat/ libm/ stdlib/ string/ |
exported-aflags:= -I. |
exported-cppflags:= -I. |
/shark/branches/xen/libc/libio/Makefile |
---|
12,5 → 12,5 |
umask.o \ |
unlink.o \ |
wrappers.o \ |
write.c |
write.o |
/shark/branches/xen/arch/x86/Makefile |
---|
1,30 → 1,36 |
targets:= \ |
abort.o \ |
advtimer.o \ |
aspace.o \ |
ccpu.o \ |
cpu2.o \ |
ctx.o \ |
cxsw-2.o \ |
ctxsw.o \ |
event.o \ |
event1.o \ |
exc.o \ |
fpu.o \ |
idtinit.o \ |
init.o \ |
intevt.o \ |
irq.o \ |
mem.o \ |
time.o \ |
aspace.o \ |
intevt.o \ |
event.o \ |
event1.o \ |
advtimer.o \ |
abort.o \ |
timeint.o \ |
libx0.a \ |
xinfo.o \ |
vm86.o \ |
x1.o \ |
xsystab.o \ |
xbios.o \ |
xconv.o \ |
xdosf.o \ |
xdosm.o \ |
ccpu.o \ |
fpu.o \ |
irq.o \ |
ctxsw.o \ |
xinfo.o \ |
xsystab.o \ |
xinit.o \ |
idtinit.o \ |
vm86.o \ |
xbios.o |
xsys0.o |
libx0.a-objs:= x0.o |
install-objs:= x0.o |
cppflags+= -I$(srctree)/libc/arch/$(ARCH)/include |
aflags+= -D__VIRCSW__ |
cppflags+= -I$(srctree)/libc/arch/$(ARCH)/include -D__VIRCSW__ |
/shark/branches/xen/Makefile |
---|
39,11 → 39,10 |
in-local:= $$(subst $$(srctree)/,,$$<) |
out-local:= $$(subst install-,,$$(subst $$(objtree)/,,$$@)) |
in-objs:= $$(filter %.o,$$^) |
in-objs-local:= $$(filter %.o,$$(subst $$(objtree)/,,$$^)) |
# The rule patterns, in quiet and in verbose form. The verbose form is |
# used also for the actual command. |
quiet_ar_cmd := ' AR\\t$(out-local) $(in-objs-local)' |
quiet_ar_cmd := ' AR\\t$(out-local)' |
ar_cmd := $(ar) cr $$@ $(in-objs) |
quiet_cc_cmd := ' CC\\t$(in-local)' |
59,9 → 58,14 |
"$$(subst $$(srctree),$$(objtree),$$(<:.c=.o))\ |
$$@" $$< > $$@ 2>/dev/null |
quiet_ld-r_cmd := ' LD\\t$(out-local) $(in-objs-local)' |
ld-r_cmd := $(ld) $$(ldflags-$$(dir $$@)) -r $(in-objs) -o $$@ |
quiet_ld-r_cmd := ' LD [R]\\t$(out-local)' |
ld-r_cmd := $(ld) $$(ldflags-$$(dir $$@)) $$(ldflags-$$@)\ |
-r $(in-objs) -o $$@ |
quiet_ld_cmd := ' LD\\t$(out-local)' |
ld_cmd := $(ld) $$(ldflags-$$(dir $$@)) $$(startup-$$@) $(in-objs)\ |
$$(ldflags-$$@) -o $$@ |
quiet_rm_cmd := ' RM\\t$$(subst clean-,,$$(subst distclean-,,$(out-local)))' |
rm_cmd := -$(rm) $$(subst clean-,,$$(subst distclean-,,$$@)) |
78,10 → 82,16 |
endef |
# Remove duplicate slashes, ../'s, trailing slashes and so on from paths. |
define clean-path |
$(dir $(abspath $(1)))$(notdir $(abspath $(1))) |
endef |
clean-path=$(dir $(abspath $(1)))$(notdir $(abspath $(1))) |
# Canonicalize a path, converting .. and . $(1) is the current directory, |
# and $(2) are the paths to be converted. |
to-local-path=$(subst $(1)/,,$(abspath $(addprefix $(1)/,$(2)))) |
# Keep only paths in $(1) that start with ./ (i.e., that are relative to the |
# current directory.) |
keep-local=$(foreach p, $(1),$(if $(subst ./,,$(dir $(p))),,$(p))) |
# Adjust the paths for all the prerequisites of a target. Given a list |
# of objects, with relative or absolute path, figure out the right paths |
# in the build directory. Leave the output in $(target-objs). |
99,18 → 109,19 |
$$(call clean-path,$$(dir))) |
endef |
# Produce targets for a given library. |
define lib-templ |
lib:=$(1) |
lib-target:=$$(objdir)/$$(lib) |
# Produce targets for a given library/application. |
define libapp-templ |
libapp:=$(1) |
is-app:=$(strip $(2)) |
libapp-target:=$$(objdir)/$$(libapp) |
# Get a list of all the prerequisites needed to build the library. |
# Get a list of all the prerequisites needed to build the library/application. |
$$(eval $$(call all-prerequisites-templ,\ |
$$(patsubst %/,%/obj.o,$$($$(lib)-objs)))) |
$$(patsubst %/,%/obj.o,$$($$(libapp)-objs)))) |
$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),$$(lib)))) |
$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),$$(libapp)))) |
$$(foreach obj,$$(target-objs),\ |
$$(eval $$(call flags-per-objects,$$(obj),$$(lib)))) |
$$(eval $$(call flags-per-objects,$$(obj),$$(libapp)))) |
# Produce the real target, in $(objtree), and the user-friendly target, |
# with a relative path to $(srctree). Note that even when the two trees |
117,25 → 128,33 |
# are equal we define two targets; a possible optimization could be to |
# use relative paths for the object tree in this case, but the code can |
# become even less readable than it is now... |
$$(lib-target): $$(target-objs) |
ifeq ($$(is-app),true) |
startup-$$(libapp-target):= $$($$(libapp)-startup) |
$$(libapp-target): $$(target-objs) |
$(call cmd,ld) |
else |
$$(libapp-target): $$(target-objs) |
$(call cmd,ar) |
short-lib-taget:=$$(subst $$(srctree)/,,$$(curdir)/$$(lib)) |
.PHONY: $$(short-lib-target) |
$$(short-lib-target): $$(lib-target) |
endif |
short-libapp-taget:=$$(subst $$(srctree)/,,$$(curdir)/$$(libapp)) |
.PHONY: $$(short-libapp-target) |
$$(short-libapp-target): $$(libapp-target) |
# Update the $(subdirs) for $(curdir) and its target list. |
subdirs+=$$(filter %/,$$($$(lib)-objs)) |
curdir-targets+=$$(lib-target) |
subdirs+=$$(filter %/,$$($$(libapp)-objs)) |
curdir-targets+=$$(libapp-target) |
.PHONY: clean-$$(lib-target) |
clean-$$(lib-target): |
.PHONY: clean-$$(libapp-target) |
clean-$$(libapp-target): |
$(call cmd,rm) |
curdir-clean-targets+= clean-$$(lib-target) |
curdir-clean-targets+= clean-$$(libapp-target) |
.PHONY: install-$$(lib-target) |
install-$$(lib-target): $$(lib-target) |
ifneq ($$(is-app),true) |
.PHONY: install-$$(libapp-target) |
install-$$(libapp-target): $$(libapp-target) |
$(call cmd,install) |
curdir-install-targets+= install-$$(lib-target) |
curdir-install-targets+= install-$$(libapp-target) |
endif |
endef |
# Produce the needed code for a given object. |
166,6 → 185,12 |
curdir-clean-targets+= clean-$$(obj-target) |
curdir-distclean-targets+= distclean-$$(obj-dep) |
ifneq ($$(filter $$(obj),$$(install-objs)),) |
.PHONY: install-$$(obj-target) |
install-$$(obj-target): $$(obj-target) |
$(call cmd,install) |
curdir-install-targets+= install-$$(obj-target) |
endif |
endef |
# Handle the flags for the current directory. for each *FLAGS variable |
216,10 → 241,12 |
$$(flag)-$$(curdir)/$$(target):=$$($$(flag)-$$(curdir)) \ |
$$($$(target)-$$(flag)) $$(extra-$$(flag)-$$(curdir)/$$(target)) |
ifneq ($$(target),install-objs) |
# Those are the flags coming from the upper directories, they are set for |
# obj.o targets, we must export them to our children, so we leave them here. |
exported-$$(flag)-$$(curdir)/$$(target):= $$($$(target)-$$(flag)) \ |
$$(extra-$$(flag)-$$(curdir)/$$(target)) |
endif |
$$(target)-$$(flag):= |
endef |
237,8 → 264,10 |
$$($$(this-obj)-$$(flag)) |
$$(this-obj)-$$(flag):= |
#to-print+= [ $$(flag)-$$(curdir)/$$(this-obj) = $$($$(flag)-$$(curdir)/$$(this-obj)) ] RET |
ifeq ($(3),install-objs) |
to-print+= [ $(2) $(3) ] RET |
endif |
endif |
# Pass the right flags to the subdirs we use to build $(target). |
ifeq ($$(notdir $(2)),obj.o) |
extra-$$(flag)-$(2):= $$(exported-$$(flag)-$$(curdir)/$$(target)) |
312,6 → 341,8 |
curdir-distclean-targets:= |
curdir-install-targets:= |
install-objs:= |
# If the output directory does not exist every target that actually |
# needs it will have to create it. |
ifneq ($(objtree),$(srctree)) |
340,6 → 371,7 |
subdirs:=$$(filter %/, $$(targets)) |
objs:=$$(filter %.o, $$(targets)) |
libs:=$$(filter %.a, $$(targets)) |
apps:=$$(filter-out $$(subdirs) $$(objs) $$(libs),$$(targets)) |
$$(eval $$(call all-prerequisites-templ, $$(subdirs))) |
subdir-targets:= $$(target-objs) |
372,9 → 404,13 |
# Produce the needed targets for each library. |
ifneq ($$(strip $$(libs)),) |
$$(foreach lib,$$(libs),$$(eval $$(call lib-templ,$$(lib)))) |
$$(foreach lib,$$(libs),$$(eval $$(call libapp-templ,$$(lib),false))) |
endif |
ifneq ($$(strip $$(apps)),) |
$$(foreach app,$$(apps),$$(eval $$(call libapp-templ,$$(app),true))) |
endif |
# Produce a target for each local object. Build the list of all the |
# targets specified by the current subdir. It is given by all the local |
# objects in $(targets) or in a library contained in it. Non-local |
387,16 → 423,35 |
# First build a relative path for all the .o files in the targets (the |
# default one and the library ones,) taking care of not being confused |
# by relative directory specifications. |
all-local-objs-paths:=$$(subst $$(curdir)/,,\ |
$$(abspath $$(addprefix $$(curdir)/,\ |
$$(objs) $$(foreach lib,$$(libs),$$(filter %.o,$$($$(lib)-objs)))))) |
#all-local-objs-paths:=$$(subst $$(curdir)/,,\ |
# $$(abspath $$(addprefix $$(curdir)/,\ |
# $$(objs) $$(install-objs)\ |
# $$(foreach lib,$$(libs),$$(filter %.o,$$($$(lib)-objs)))\ |
# $$(foreach app,$$(apps),$$(filter %.o,$$($$(app)-objs)))))) |
all-local-objs-paths:=$$(call to-local-path,$$(curdir),\ |
$$(objs)\ |
$$(foreach lib,$$(libs),$$(filter %.o,$$($$(lib)-objs)))\ |
$$(foreach app,$$(apps),$$(filter %.o,$$($$(app)-objs)))) |
all-local-install-objs-paths:=$$(call to-local-path,$$(curdir),\ |
$$(install-objs)) |
# Then keep only those with a dir equal to ./ A local object is not |
# allowed to be specified with a path specifying a directory different |
# from the current one. |
all-local-objs:=$$(foreach obj, $$(all-local-objs-paths), \ |
$$(if $$(subst ./,,$$(dir $$(obj))),,$$(obj))) |
# from the current one. Objects to be installed are only taken into |
# account if they're local to the current directory. |
#all-local-objs:=$$(foreach obj, $$(all-local-objs-paths),\ |
# $$(if $$(subst ./,,$$(dir $$(obj))),,$$(obj))) |
all-local-install-objs:=$$(call keep-local,$$(all-local-install-objs-paths)) |
all-local-objs:=$$(call keep-local,$$(all-local-objs-paths))\ |
$$(all-local-install-objs) |
$$(eval $$(call all-prerequisites-templ,$$(all-local-install-objs))) |
$$(foreach flag,$(flags),\ |
$$(eval $$(call flags-per-target,$$(flag),install-objs))) |
$$(foreach obj,$$(target-objs),\ |
$$(eval $$(call flags-per-objects,$$(obj),install-objs))) |
# Produce one target per object, and the rules to build them along with |
# their dependencies. |
ifneq ($$(strip $$(all-local-objs)),) |
452,57 → 507,11 |
.DEFAULT_GOAL:= all |
include shark.cfg |
installdir:=$(objtree)/.lib |
# Handle Shark configuration. Really insane, indeed. |
options:=TSC APIC BIOS TRACER FG FB COMPILER |
define strip-in-place |
$(1):=$(strip $($(1))) |
endef |
$(foreach cfgopt,$(options),$(eval $(call strip-in-place,$(cfgopt)))) |
# Include all the Shark specific configuration... |
include $(if $(S),$(S)/)Rules.mk |
cpp-tsc-TRUE:= -D__TSC__ |
cpp-apic-TRUE:= -D__APIC__ |
cpp-bios-VM86:= -DVM86 |
cpp-tracer-NEW:= -D__NEW_TRACER__ |
cpp-tracer-OLD:= -D__OLD_TRACER__ |
cpp-fg-FORCE_PXC:= -D__FORCE_PXC__ |
cpp-fb-VESA:= -DCONFIG_FB_VESA -DCONFIG_LOGO |
cpp-fb-FINDPCI:= -DCONFIG_FB_RIVA -DCONFIG_FB_RADEON -DCONFIG_FB_MATROX \ |
-DCONFIG_LOGO -DCONFIG_FB_MATROX_G100 \ |
-DCONFIG_FB_MATROX_MILLENIUM -DCONFIG_FB_MATROX_MYSTIQUE |
cpp-fb-VGA16:= -DCONFIG_FB_VGA16 |
include-dirs:= \ |
-I$(srctree)/include -I$(srctree)/modules \ |
-I$(srctree)/arch/$(ARCH)/include/arch \ |
-I$(srctree)/libc/arch/$(ARCH)/include \ |
-I$(srctree)/tracer/include |
config:= -D__LINUX__ \ |
$(cpp-tsc-$(TSC)) $(cpp-apic-$(APIC)) $(cpp-bios-$(BIOS)) \ |
$(cpp-tracer-$(TRACER)) $(cpp-fg-$(FG)) $(cpp-fb-$(FB)) |
exported-cppflags:= $(include-dirs) $(config) |
exported-aflags:= -x assembler-with-cpp $(include-dirs) $(config) |
cc-compiler-GCC4:= -Wimplicit-function-declaration -Wno-attributes \ |
-Wno-pointer-sign -Wall -O -fno-builtin -nostdinc \ |
-minline-all-stringops -fno-stack-protector |
cc-compiler-GCC3:= -Wimplicit-function-declaration -Wall -O \ |
-fno-builtin -nostdinc -minline-all-stringops |
cc-compiler-DJGPP:= -Wimplicit-function-declaration -Wall -O \ |
-fno-builtin -nostdinc -minline-all-stringops |
exported-cflags:= $(cc-compiler-$(COMPILER)) |
fs-YES:= fs/ |
targets:= libgkern.a drivers/ libc/ ports/ tracer/ $(fs-$(SHARK_FS)) |
libgkern.a-objs:= arch/$(ARCH)/ kernel/ modules/ |
# Let the good times roll... |
$(eval $(call recurse-templ,$(srctree))) |
/shark/branches/xen/drivers/pci6025e/Makefile |
---|
1,6 → 1,6 |
targets:= lib6025e.a |
lib6026e.a-objs:= \ |
lib6025e.a-objs:= \ |
pci6025e.o \ |
tim/ \ |
dac/ \ |