Rev 1618 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed
# Copyright (c) 2007 Fabio Checconi <fabio@gandalf.sssup.it>
#
# This is a non-recursive makefile that supports a Kbuild-like syntax
# for input/output specification.
# Handle the V=0|1 option. We use both a long and a short form. In
# the short one we use the $(Q) variable prepended to shell commands
# (e.g., $(Q)mkdir) that in quiet mode expands to @, and in verbose
# mode expands to nothing. In the long one we have a couple of strings
# per command, one named quiet_cmd, the other cmd, and we always echo
# $(QS)cmd, so if $(QS) expands to quiet_ the first string is printed.
# The first string is the quiet version of the command, the second one
# holds the whole command.
ifneq ($(V),1)
Q:=@
QS:=quiet_
endif
# Handle the make -s flag: produce no output at all...
ifneq ($(findstring s,$(MAKEFLAGS)),)
Q:=@
QS:=nothing_
endif
# The variables used to generate the rules to build targets. Use
# CROSS_COMPILE to specify the prefix to be used for the toolchain.
ar:= $(CROSS_COMPILE)$(AR)
as:= $(CROSS_COMPILE)$(CC)
cc:= $(CROSS_COMPILE)$(CC)
ld:= $(CROSS_COMPILE)$(LD)
rm:= $(if $(RM),$(RM),rm)
install:= $(if $(INSTALL),$(INSTALL),install)
# As in the rules we cannot use the variables we use in the makefile,
# because we reassign them for every directory we visit, we just try
# to recover the information from the targets being built. Another
# way could have been to expand the variables when generating the
# rules, but it would have made rule generation unreadable.
in-local:= $$(subst $$(srctree)/,,$$<)
out-local:= $$(subst install-,,$$(subst $$(objtree)/,,$$@))
in-objs:= $$(filter %.o,$$^)
in-objs-local:= $$(filter %.o,$$(subst $$(objtree)/,,$$^))
# The rule patterns, in quiet and in verbose form. The verbose form is
# used also for the actual command.
quiet_ar_cmd := ' AR\\t$(out-local) $(in-objs-local)'
ar_cmd := $(ar) cr $$@ $(in-objs)
quiet_cc_cmd := ' CC\\t$(in-local)'
cc_cmd := $(cc) $$(cflags-$$(<:.c=.o)) $$(cppflags-$$(<:.c=.o)) \
-c $$< -o $$@
quiet_as_cmd := ' AS\\t$(in-local)'
as_cmd := $(as) $$(aflags-$$(<:.s=.o)) -c $$< -o $$@
quiet_dep_cmd := ' DEP\\t$(in-local)'
dep_cmd := $(cc) $$(cflags-$$(<:.c=.o)) $$(cppflags-$$(<:.c=.o)) \
-M -MT \
"$$(subst $$(srctree),$$(objtree),$$(<:.c=.o))\
$$@" $$< > $$@ 2>/dev/null
quiet_ld-r_cmd := ' LD\\t$(out-local) $(in-objs-local)'
ld-r_cmd := $(ld) $$(ldflags-$$(dir $$@)) -r $(in-objs) -o $$@
quiet_rm_cmd := ' RM\\t$$(subst clean-,,$$(subst distclean-,,$(out-local)))'
rm_cmd := -$(rm) $$(subst clean-,,$$(subst distclean-,,$$@))
quiet_install_cmd := ' INSTALL $(out-local)'
install_cmd := -$(install) $$(subst install-,,$$@) $$(installdir)
# Generate the requested rule for the requested directory. First echo
# the command according to the requested verbosity (suppress all the
# output if $(QS)$(1)_cmd is not defined, i.e., in the silent make case,)
# and then emit the actual command.
define cmd
$(if $($(QS)$(1)_cmd),@echo -e '$($(QS)$(1)_cmd)')
@$($(1)_cmd)
endef
# Remove duplicate slashes, ../'s, trailing slashes and so on from paths.
define clean-path
$(dir $(abspath $(1)))$(notdir $(abspath $(1)))
endef
# Adjust the paths for all the prerequisites of a target. Given a list
# of objects, with relative or absolute path, figure out the right paths
# in the build directory. Leave the output in $(target-objs).
define all-prerequisites-templ
target-obj-list:=$(1)
# Filter absolute paths.
target-objs:=$$(filter $(srctree)/%,$$(target-obj-list))
target-obj-list:=$$(filter-out $$(target-objs),$$(target-obj-list))
# Add all the other objects, and convert the path to the $(objtree)
# root and with a reasonable path.
target-objs+=$$(addprefix $$(curdir)/,$$(target-obj-list))
target-objs:=$$(foreach dir,$$(subst $(srctree),$(objtree),$$(target-objs)),\
$$(call clean-path,$$(dir)))
endef
# Produce targets for a given library.
define lib-templ
lib:=$(1)
lib-target:=$$(objdir)/$$(lib)
# Get a list of all the prerequisites needed to build the library.
$$(eval $$(call all-prerequisites-templ,\
$$(patsubst %/,%/obj.o,$$($$(lib)-objs))))
$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),$$(lib))))
$$(foreach obj,$$(target-objs),\
$$(eval $$(call flags-per-objects,$$(obj),$$(lib))))
# Produce the real target, in $(objtree), and the user-friendly target,
# with a relative path to $(srctree). Note that even when the two trees
# are equal we define two targets; a possible optimization could be to
# use relative paths for the object tree in this case, but the code can
# become even less readable than it is now...
$$(lib-target): $$(target-objs)
$(call cmd,ar)
short-lib-taget:=$$(subst $$(srctree)/,,$$(curdir)/$$(lib))
.PHONY: $$(short-lib-target)
$$(short-lib-target): $$(lib-target)
# Update the $(subdirs) for $(curdir) and its target list.
subdirs+=$$(filter %/,$$($$(lib)-objs))
curdir-targets+=$$(lib-target)
.PHONY: clean-$$(lib-target)
clean-$$(lib-target):
$(call cmd,rm)
curdir-clean-targets+= clean-$$(lib-target)
.PHONY: install-$$(lib-target)
install-$$(lib-target): $$(lib-target)
$(call cmd,install)
curdir-install-targets+= install-$$(lib-target)
endef
# Produce the needed code for a given object.
define obj-templ
obj:=$(1)
obj-target:=$$(objdir)/$$(obj)
obj-dep:=$$(objdir)/.$$(obj:.o=.c).deps
# Handle dependencies.
ifeq ($(goals-have-clean),)
$$(obj-dep): $$(objdir-prereq)
-include $$(obj-dep)
endif
# Produce the user shortcut for the real target (that does not need to
# be produced, as it is handled by implicit rules.)
short-obj-target:= $$(subst $$(srctree)/,,$$(curdir)/$$(obj))
.PHONY: $$(short-obj-target)
$$(short-obj-target): $$(obj-target)
curdir-targets+=$$(obj-target)
.PHONY: clean-$$(obj-target) distclean-$$(obj-dep)
clean-$$(obj-target):
$(call cmd,rm)
distclean-$$(obj-dep):
$(call cmd,rm)
curdir-clean-targets+= clean-$$(obj-target)
curdir-distclean-targets+= distclean-$$(obj-dep)
endef
# Handle the flags for the current directory. for each *FLAGS variable
# used by the implicit rules there are two variants:
# o the local one, e.g., cflags:=-I. or cflags+=-I. changing the
# flags used only by the current directory.
# o The global one, e.g., exported-cflags:=-I$(srctree) changing the
# flags for the current directory and all its subdirs.
# The flag handling is split in three parts, one to be inserted before
# including the current directory makefile, one before recurring into
# subdirs, the other one after the recursion.
define flags-save-templ
flag:=$(1)
# Flags on input to this dir; they must be preserved for our sibling
# directories.
saved-$$(flag)-$$(curdir):= $$($$(flag))
endef
define flags-pre-templ
flag:=$(1)
# For the current directory, use the user-specified flags (that may
# come from our parent directory.) Extra flags are used to specify
# library-specific flags.
$$(flag)-$$(curdir):=$$($$(flag)) $$(exported-$$(flag))
#to-print+= [ $$(flag)-$$(curdir) = $$($$(flag)-$$(curdir)) ] RET
# Export to our children also the user exported flags.
$$(flag):= $$(saved-$$(flag)-$$(curdir)) $$(exported-$$(flag))
exported-$$(flag):=
endef
define flags-post-templ
flag:=$(1)
# Restore the flags that our parent specified.
$$(flag):= $$(saved-$$(flag)-$$(curdir))
endef
# Allow redefinition of flags on the basis of a single target. Each
# target gets its own version of the flags, based on the ones of the
# current directory and its own ones.
define flags-per-target
flag:=$(1)
target:=$(2)
$$(flag)-$$(curdir)/$$(target):=$$($$(flag)-$$(curdir)) \
$$($$(target)-$$(flag)) $$(extra-$$(flag)-$$(curdir)/$$(target))
# Those are the flags coming from the upper directories, they are set for
# obj.o targets, we must export them to our children, so we leave them here.
exported-$$(flag)-$$(curdir)/$$(target):= $$($$(target)-$$(flag)) \
$$(extra-$$(flag)-$$(curdir)/$$(target))
$$(target)-$$(flag):=
endef
define flags-per-object
# Generate flags only for objects in the current directory, as prerequisites
# that come from ousdide are not compiled here.
flag:=$(1)
target:=$(3)
ifeq ($(dir $(subst $(objtree),$(srctree),$(2))),$$(curdir)/)
this-obj:=$(notdir $(2))
# The flags for a given object are the ones specified for its target
# plus any specific one.
$$(flag)-$$(curdir)/$$(this-obj):=$$($$(flag)-$$(curdir)/$$(target)) \
$$($$(this-obj)-$$(flag))
$$(this-obj)-$$(flag):=
#to-print+= [ $$(flag)-$$(curdir)/$$(this-obj) = $$($$(flag)-$$(curdir)/$$(this-obj)) ] RET
endif
# Pass the right flags to the subdirs we use to build $(target).
ifeq ($$(notdir $(2)),obj.o)
extra-$$(flag)-$(2):= $$(exported-$$(flag)-$$(curdir)/$$(target))
endif
endef
# Allow the user to specify per-object flags
define flags-per-objects
$$(foreach flag,$$(flags),\
$$(eval $$(call flags-per-object,$$(flags),$(1),$(2))))
endef
# Helper to define per-library flags.
define flags-per-libs
$$(foreach flag,$$(flags),\
$$(eval $$(call flags-per-lib,$$(flags),$(1),$(2))))
endef
# Disable default implicit rules.
.SUFFIXES:
# The roots of our source and object trees. If an O=dir option is
# passed to the toplevel makefile all the output of the building
# process is in dir.
srctree:=$(call clean-path,$(CURDIR))
objtree:=$(if $(O),$(call clean-path,$(O)),$(srctree))
ifeq ($(wildcard $(objtree)),)
$(error Output directory $(objtree) does not exist)
endif
clean-targets:=
distclean-targets:=
install-targets:=
goals-have-clean:=$(strip $(filter clean distclean,$(MAKECMDGOALS)))
aflags:= $(AFLAGS)
cflags:= $(CFLAGS)
cppflags:= $(CPPFLAGS)
ldflags:= $(LDFLAGS)
flags:= aflags cflags cppflags ldflags
# XXX debug only
to-print:=
# The following macro is used to do a standard set of operations
# for every subdirectory we have to work on. It is instantiated
# every time we change subdirectory, and generates a set of targets
# specific to that directory.
define recurse-templ
# Remember where we are in the source and object tree. The clean-path
# macro is used for user output and for generating targets independently
# from directories being specified as dir or dir/ or with multiple slashes
# and so on.
curdir:=$$(call clean-path,$(1))
objdir:=$(objtree)$$(subst $(srctree),,$$(curdir))
# Save the flags our parent passed us.
$$(foreach flag,$(flags),$$(eval $$(call flags-save-templ,$$(flag))))
# A list of all the targets defined for the current directory. It is
# used to produce an user-reachable target for submakes into source tree
# subdirectories, e.g., if src/utils is a source directory, make src/utils
# will build all the targets defined inside it. Start with the short path
# to all subdirs.
curdir-targets:=
curdir-clean-targets:=
curdir-distclean-targets:=
curdir-install-targets:=
# If the output directory does not exist every target that actually
# needs it will have to create it.
ifneq ($(objtree),$(srctree))
ifeq ($$(wildcard $$(objdir)),)
objdir-prereq:=$$(objdir)/.build
$$(objdir)/.build:
$(Q)if [ ! -d $$(dir $$@) ] ; then \
mkdir -p $$(dir $$@) ; touch $$@ ; fi
endif
endif
# Include the next subdirectory. Don't include the root makefile,
# if we are at the first step of the recursion.
include $$(subst $(srctree)/Makefile,,$$(curdir)/Makefile)
# Figure out all the targets. We support three kind of targets:
# - subdirectories
# - libraries
# - objects
#
# Subdirectories are recursively processed, libraries are built using
# the objects specified in their *.a-objs target (if it contains a
# subdirectory the latter is processed and the resulting obj.o object
# is included,) and objects are compiled and incrementally linked
# together in a obj.o file.
subdirs:=$$(filter %/, $$(targets))
objs:=$$(filter %.o, $$(targets))
libs:=$$(filter %.a, $$(targets))
$$(eval $$(call all-prerequisites-templ, $$(subdirs)))
subdir-targets:= $$(target-objs)
# Recurse into all the subdirectories.
curdir-targets+=$$(subst $(objtree)/,,$$(subdir-targets))
# Look for prerequisites to build obj.o for the current directory.
$$(eval $$(call all-prerequisites-templ,\
$$(filter-out $$(exclude),$$(objs))))
target-objs+=$$(addsuffix /obj.o,$$(subdir-targets))
$$(foreach flag,$(flags),$$(eval $$(call flags-pre-templ,$$(flag))))
# Produce a target for obj.o, even if not needed (it will be empty in
# this case.)
ifneq ($$(strip $$(target-objs)),)
$$(foreach flag,$(flags),$$(eval $$(call flags-per-target,$$(flag),obj.o)))
$$(foreach obj,$$(target-objs),\
$$(eval $$(call flags-per-objects,$$(obj),obj.o)))
$$(objdir)/obj.o: $$(target-objs)
$(call cmd,ld-r)
else
$$(objdir)/obj.o:
$(Q)touch $$@
endif
curdir-targets+= $$(objdir)/obj.o
# to-print+= [ [ $$(objdir)/obj.o ] $$(target-objs) ]
# Produce the needed targets for each library.
ifneq ($$(strip $$(libs)),)
$$(foreach lib,$$(libs),$$(eval $$(call lib-templ,$$(lib))))
endif
# Produce a target for each local object. Build the list of all the
# targets specified by the current subdir. It is given by all the local
# objects in $(targets) or in a library contained in it. Non-local
# objects can be specified as dependencies but must be built from the
# directory containing them (if needed their directory can specify that
# they are not to be included in the local obj.o putting them into
# $(exclude); this may not seem straightforward but is to support a
# few corner cases.)
#
# First build a relative path for all the .o files in the targets (the
# default one and the library ones,) taking care of not being confused
# by relative directory specifications.
all-local-objs-paths:=$$(subst $$(curdir)/,,\
$$(abspath $$(addprefix $$(curdir)/,\
$$(objs) $$(foreach lib,$$(libs),$$(filter %.o,$$($$(lib)-objs))))))
# Then keep only those with a dir equal to ./ A local object is not
# allowed to be specified with a path specifying a directory different
# from the current one.
all-local-objs:=$$(foreach obj, $$(all-local-objs-paths), \
$$(if $$(subst ./,,$$(dir $$(obj))),,$$(obj)))
# Produce one target per object, and the rules to build them along with
# their dependencies.
ifneq ($$(strip $$(all-local-objs)),)
$$(foreach obj,$$(all-local-objs),$$(eval $$(call obj-templ,$$(obj))))
$$(objdir)/%.o: $$(curdir)/%.c
$(call cmd,cc)
$$(objdir)/%.o: $$(curdir)/%.s
$(call cmd,as)
$$(objdir)/.%.c.deps: $$(curdir)/%.c
$(call cmd,dep)
endif
# Produce the user-friendly target for the source dir, depending
# on its obj.o, libs and local objects (only if they can be built.)
curdir-target:= $$(subst $$(srctree)/,,$$(curdir))
.PHONY: $$(curdir-target)
$$(curdir-target): $$(curdir-targets)
# Produce the clean and distclean targets for the current directory.
.PHONY: clean-$$(curdir-target) distclean-$$(curdir-target)
clean-$$(curdir-target): $$(curdir-clean-targets)
distclean-$$(curdir-target): clean-$$(curdir-target) \
$$(curdir-distclean-targets)
# to-print+=[ distclean-$$(curdir-target) ]
clean-targets+= clean-$$(curdir-target)
distclean-targets+= distclean-$$(curdir-target)
# Produce the install target. This is very Shark specific...
.PHONY: install-$$(curdir-target)
$$(curdir-install-targets): $(installdir)/.build
install-$$(curdir-target): $$(curdir-install-targets)
install-targets+= install-$$(curdir-target)
#to-print+=[ install-$$(curdir-target) = $$(curdir-install-targets) ]
# Actually do the recursion, generating the code specified by
# recurse-tmpl for every subdirectory needed from the one we are
# leaving.
ifneq ($$(strip $$(subdirs)),)
$$(foreach dir,$$(subdirs),$$(eval $$(call recurse-templ,$(1)/$$(dir))))
curdir:=$$(call clean-path,$(1))
endif
$$(foreach flag,$(flags),$$(eval $$(call flags-post-templ,$$(flag))))
endef
.DEFAULT_GOAL:= all
include shark.cfg
installdir:=$(objtree)/.lib
# Handle Shark configuration. Really insane, indeed.
options:=TSC APIC BIOS TRACER FG FB COMPILER
define strip-in-place
$(1):=$(strip $($(1)))
endef
$(foreach cfgopt,$(options),$(eval $(call strip-in-place,$(cfgopt))))
cpp-tsc-TRUE:= -D__TSC__
cpp-apic-TRUE:= -D__APIC__
cpp-bios-VM86:= -DVM86
cpp-tracer-NEW:= -D__NEW_TRACER__
cpp-tracer-OLD:= -D__OLD_TRACER__
cpp-fg-FORCE_PXC:= -D__FORCE_PXC__
cpp-fb-VESA:= -DCONFIG_FB_VESA -DCONFIG_LOGO
cpp-fb-FINDPCI:= -DCONFIG_FB_RIVA -DCONFIG_FB_RADEON -DCONFIG_FB_MATROX \
-DCONFIG_LOGO -DCONFIG_FB_MATROX_G100 \
-DCONFIG_FB_MATROX_MILLENIUM -DCONFIG_FB_MATROX_MYSTIQUE
cpp-fb-VGA16:= -DCONFIG_FB_VGA16
include-dirs:= \
-I$(srctree)/include -I$(srctree)/modules \
-I$(srctree)/libc/arch/$(ARCH)/include \
-I$(srctree)/tracer/include \
-I$(srctree)/oslib
config:= -D__LINUX__ \
$(cpp-tsc-$(TSC)) $(cpp-apic-$(APIC)) $(cpp-bios-$(BIOS)) \
$(cpp-tracer-$(TRACER)) $(cpp-fg-$(FG)) $(cpp-fb-$(FB))
exported-cppflags:= $(include-dirs) $(config)
exported-aflags:= -x assembler-with-cpp $(include-dirs) $(config)
cc-compiler-GCC4:= -Wimplicit-function-declaration -Wno-attributes \
-Wno-pointer-sign -Wall -O -fno-builtin -nostdinc \
-minline-all-stringops -fno-stack-protector
cc-compiler-GCC3:= -Wimplicit-function-declaration -Wall -O \
-fno-builtin -nostdinc -minline-all-stringops
cc-compiler-DJGPP:= -Wimplicit-function-declaration -Wall -O \
-fno-builtin -nostdinc -minline-all-stringops
exported-cflags:= $(cc-compiler-$(COMPILER))
fs-YES:= fs/
targets:= libgkern.a drivers/ libc/ ports/ tracer/ $(fs-$(SHARK_FS))
libgkern.a-objs:= oslib/ kernel/ modules/
# Let the good times roll...
$(eval $(call recurse-templ,$(srctree)))
all: $(srctree)
.PHONY: clean distclean
clean: $(clean-targets)
distclean: $(distclean-targets)
debug:
@echo $(to-print)
.PHONY: install $(install-targets)
$(installdir)/.build:
$(Q)if [ ! -d $(dir $@) ] ; then \
mkdir -p $(dir $@) ; touch $@ ; fi
install: $(install-targets)