Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/**** vi:set ts=8 sts=8 sw=8:************************************************
*
* Copyright (C) 2002 Marcin Dalecki <martin@dalecki.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/types.h>
#include <asm/byteorder.h>
/*
* With each packet command, we allocate a buffer.
* This is used for several packet
* commands (Not for READ/WRITE commands).
*/
#define IDEFLOPPY_PC_BUFFER_SIZE 256
#define IDETAPE_PC_BUFFER_SIZE 256
/*
* Packet flags bits.
*/
#define PC_ABORT 0 /* set when an error is considered normal - we won't retry */
#define PC_WAIT_FOR_DSC 1 /* 1 when polling for DSC on a media access command */
#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */
#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */
#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */
#define PC_WRITING 5 /* data direction */
#define PC_SUPPRESS_ERROR 6 /* suppress error reporting */
#define PC_TRANSFORM 7 /* transform SCSI commands */
/* This struct get's shared between different drivers.
*/
struct atapi_packet_command {
u8 c[12]; /* Actual packet bytes */
char *buffer; /* Data buffer */
int buffer_size; /* Size of our data buffer */
char *current_position; /* Pointer into the above buffer */
int request_transfer; /* Bytes to transfer */
int actually_transferred; /* Bytes actually transferred */
unsigned long flags; /* Status/Action bit flags: long for set_bit */
/* FIXME: the following is ugly as hell, but the only way we can start
* actually to unify the code.
*/
/* driver specific data. */
/* floppy/tape */
int retries; /* On each retry, we increment retries */
int error; /* Error code */
char *b_data; /* Pointer which runs on the buffers */
unsigned int b_count; /* Missing/Available data on the current buffer */
u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
/* Called when this packet command is completed */
void (*callback) (struct ata_device *, struct request *);
/* only tape */
struct bio *bio;
/* only scsi */
struct {
unsigned int b_count; /* Bytes transferred from current entry */
struct scatterlist *sg; /* Scatter gather table */
struct scsi_cmnd *scsi_cmd; /* SCSI command */
void (*done)(struct scsi_cmnd *); /* Scsi completion routine */
unsigned long timeout; /* Command timeout */
} s;
};
/*
* ATAPI Status Register.
*/
typedef union {
u8 all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 check : 1; /* Error occurred */
u8 idx : 1; /* Reserved */
u8 corr : 1; /* Correctable error occurred */
u8 drq : 1; /* Data is request by the device */
u8 dsc : 1; /* Media access command finished / Buffer availability */
u8 reserved5 : 1; /* Reserved */
u8 drdy : 1; /* Ignored for ATAPI commands (ready to accept ATA command) */
u8 bsy : 1; /* The device has access to the command block */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 bsy : 1;
u8 drdy : 1;
u8 reserved5 : 1;
u8 dsc : 1;
u8 drq : 1;
u8 corr : 1;
u8 idx : 1;
u8 check : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_status_reg_t;
/*
* ATAPI error register.
*/
typedef union {
u8 all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 ili : 1; /* Illegal Length Indication */
u8 eom : 1; /* End Of Media Detected */
u8 abrt : 1; /* Aborted command - As defined by ATA */
u8 mcr : 1; /* Media Change Requested - As defined by ATA */
u8 sense_key : 4; /* Sense key of the last failed packet command */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 sense_key : 4;
u8 mcr : 1;
u8 abrt : 1;
u8 eom : 1;
u8 ili : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_error_reg_t;
/* Currently unused, but please do not remove. --bkz */
/*
* ATAPI Feature Register.
*/
typedef union {
u8 all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 dma : 1; /* Using DMA or PIO */
u8 reserved321 : 3; /* Reserved */
u8 reserved654 : 3; /* Reserved (Tag Type) */
u8 reserved7 : 1; /* Reserved */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 reserved7 : 1;
u8 reserved654 : 3;
u8 reserved321 : 3;
u8 dma : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_feature_reg_t;
/*
* ATAPI Byte Count Register.
*/
typedef union {
u16 all : 16;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 low; /* LSB */
u8 high; /* MSB */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 high;
u8 low;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_bcount_reg_t;
/*
* ATAPI Interrupt Reason Register.
*/
typedef union {
u8 all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 cod : 1; /* Information transferred is command (1) or data (0) */
u8 io : 1; /* The device requests us to read (1) or write (0) */
u8 reserved : 6; /* Reserved */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 reserved : 6;
u8 io : 1;
u8 cod : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_ireason_reg_t;
/* Currently unused, but please do not remove. --bkz */
/*
* ATAPI Drive Select Register.
*/
typedef union {
u8 all :8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 sam_lun :3; /* Logical unit number */
u8 reserved3 :1; /* Reserved */
u8 drv :1; /* The responding drive will be drive 0 (0) or drive 1 (1) */
u8 one5 :1; /* Should be set to 1 */
u8 reserved6 :1; /* Reserved */
u8 one7 :1; /* Should be set to 1 */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 one7 :1;
u8 reserved6 :1;
u8 one5 :1;
u8 drv :1;
u8 reserved3 :1;
u8 sam_lun :3;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_drivesel_reg_t;
/* Currently unused, but please do not remove. --bkz */
/*
* ATAPI Device Control Register.
*/
typedef union {
u8 all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 zero0 : 1; /* Should be set to zero */
u8 nien : 1; /* Device interrupt is disabled (1) or enabled (0) */
u8 srst : 1; /* ATA software reset. ATAPI devices should use the new ATAPI srst. */
u8 one3 : 1; /* Should be set to 1 */
u8 reserved4567 : 4; /* Reserved */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 reserved4567 : 4;
u8 one3 : 1;
u8 srst : 1;
u8 nien : 1;
u8 zero0 : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_control_reg_t;
/*
* The following is used to format the general configuration word
* of the ATAPI IDENTIFY DEVICE command.
*/
struct atapi_id_gcw {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 packet_size : 2; /* Packet Size */
u8 reserved234 : 3; /* Reserved */
u8 drq_type : 2; /* Command packet DRQ type */
u8 removable : 1; /* Removable media */
u8 device_type : 5; /* Device type */
u8 reserved13 : 1; /* Reserved */
u8 protocol : 2; /* Protocol type */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 protocol : 2;
u8 reserved13 : 1;
u8 device_type : 5;
u8 removable : 1;
u8 drq_type : 2;
u8 reserved234 : 3;
u8 packet_size : 2;
#else
#error "Please fix <asm/byteorder.h>"
#endif
};
/*
* INQUIRY packet command - Data Format.
*/
typedef struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 device_type : 5; /* Peripheral Device Type */
u8 reserved0_765 : 3; /* Peripheral Qualifier - Reserved */
u8 reserved1_6t0 : 7; /* Reserved */
u8 rmb : 1; /* Removable Medium Bit */
u8 ansi_version : 3; /* ANSI Version */
u8 ecma_version : 3; /* ECMA Version */
u8 iso_version : 2; /* ISO Version */
u8 response_format : 4; /* Response Data Format */
u8 reserved3_45 : 2; /* Reserved */
u8 reserved3_6 : 1; /* TrmIOP - Reserved */
u8 reserved3_7 : 1; /* AENC - Reserved */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 reserved0_765 : 3;
u8 device_type : 5;
u8 rmb : 1;
u8 reserved1_6t0 : 7;
u8 iso_version : 2;
u8 ecma_version : 3;
u8 ansi_version : 3;
u8 reserved3_7 : 1;
u8 reserved3_6 : 1;
u8 reserved3_45 : 2;
u8 response_format : 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
u8 additional_length; /* Additional Length (total_length-4) */
u8 rsv5, rsv6, rsv7; /* Reserved */
u8 vendor_id[8]; /* Vendor Identification */
u8 product_id[16]; /* Product Identification */
u8 revision_level[4]; /* Revision Level */
u8 vendor_specific[20]; /* Vendor Specific - Optional */
u8 reserved56t95[40]; /* Reserved - Optional */
/* Additional information may be returned */
} atapi_inquiry_result_t;
/*
* REQUEST SENSE packet command result - Data Format.
*/
typedef struct atapi_request_sense {
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 error_code : 7; /* Error Code (0x70 - current or 0x71 - deferred) */
u8 valid : 1; /* The information field conforms to standard */
u8 reserved1 : 8; /* Reserved (Segment Number) */
u8 sense_key : 4; /* Sense Key */
u8 reserved2_4 : 1; /* Reserved */
u8 ili : 1; /* Incorrect Length Indicator */
u8 eom : 1; /* End Of Medium */
u8 filemark : 1; /* Filemark */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 valid : 1;
u8 error_code : 7;
u8 reserved1 : 8;
u8 filemark : 1;
u8 eom : 1;
u8 ili : 1;
u8 reserved2_4 : 1;
u8 sense_key : 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
u32 information __attribute__ ((packed));
u8 asl; /* Additional sense length (n-7) */
u32 command_specific; /* Additional command specific information */
u8 asc; /* Additional Sense Code */
u8 ascq; /* Additional Sense Code Qualifier */
u8 replaceable_unit_code; /* Field Replaceable Unit Code */
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 sk_specific1 : 7; /* Sense Key Specific */
u8 sksv : 1; /* Sense Key Specific information is valid */
#elif defined(__BIG_ENDIAN_BITFIELD)
u8 sksv : 1; /* Sense Key Specific information is valid */
u8 sk_specific1 : 7; /* Sense Key Specific */
#else
#error "Please fix <asm/byteorder.h>"
#endif
u8 sk_specific[2]; /* Sense Key Specific */
u8 pad[2]; /* Padding to 20 bytes */
} atapi_request_sense_result_t;
extern void atapi_init_pc(struct atapi_packet_command *pc);
extern void atapi_discard_data(struct ata_device *, unsigned int);
extern void atapi_write_zeros(struct ata_device *, unsigned int);
extern void atapi_read(struct ata_device *, u8 *, unsigned int);
extern void atapi_write(struct ata_device *, u8 *, unsigned int);
typedef enum {
ide_wait, /* insert rq at end of list, and wait for it */
ide_preempt, /* insert rq in front of current request */
ide_end /* insert rq at end of list, but don't wait for it */
} ide_action_t;
extern int ide_do_drive_cmd(struct ata_device *, struct request *, ide_action_t);