Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*
* 2.5 block I/O model
*
* Copyright (C) 2001 Jens Axboe <axboe@suse.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public Licens
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
*/
#ifndef __LINUX_BIO_H
#define __LINUX_BIO_H
#include <linux/highmem.h>
#include <linux/mempool.h>
/* Platforms may set this to teach the BIO layer about IOMMU hardware. */
#include <asm/io.h>
#ifndef BIO_VMERGE_BOUNDARY
#define BIO_VMERGE_BOUNDARY 0
#endif
#define BIO_DEBUG
#ifdef BIO_DEBUG
#define BIO_BUG_ON BUG_ON
#else
#define BIO_BUG_ON
#endif
#define BIO_MAX_PAGES (256)
#define BIO_MAX_SIZE (BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
#define BIO_MAX_SECTORS (BIO_MAX_SIZE >> 9)
/*
* was unsigned short, but we might as well be ready for > 64kB I/O pages
*/
struct bio_vec {
struct page *bv_page;
unsigned int bv_len;
unsigned int bv_offset;
};
struct bio;
typedef int (bio_end_io_t) (struct bio *, unsigned int, int);
typedef void (bio_destructor_t) (struct bio *);
/*
* main unit of I/O for the block layer and lower layers (ie drivers and
* stacking drivers)
*/
struct bio {
sector_t bi_sector;
struct bio *bi_next; /* request queue link */
struct block_device *bi_bdev;
unsigned long bi_flags; /* status, command, etc */
unsigned long bi_rw; /* bottom bits READ/WRITE,
* top bits priority
*/
unsigned short bi_vcnt; /* how many bio_vec's */
unsigned short bi_idx; /* current index into bvl_vec */
/* Number of segments in this BIO after
* physical address coalescing is performed.
*/
unsigned short bi_phys_segments;
/* Number of segments after physical and DMA remapping
* hardware coalescing is performed.
*/
unsigned short bi_hw_segments;
unsigned int bi_size; /* residual I/O count */
unsigned int bi_max_vecs; /* max bvl_vecs we can hold */
struct bio_vec *bi_io_vec; /* the actual vec list */
bio_end_io_t *bi_end_io;
atomic_t bi_cnt; /* pin count */
void *bi_private;
bio_destructor_t *bi_destructor; /* destructor */
};
/*
* bio flags
*/
#define BIO_UPTODATE 0 /* ok after I/O completion */
#define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */
#define BIO_EOF 2 /* out-out-bounds error */
#define BIO_SEG_VALID 3 /* nr_hw_seg valid */
#define BIO_CLONED 4 /* doesn't own data */
#define BIO_BOUNCED 5 /* bio is a bounce bio */
#define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag)))
/*
* top 4 bits of bio flags indicate the pool this bio came from
*/
#define BIO_POOL_BITS (4)
#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
/*
* bio bi_rw flags
*
* bit 0 -- read (not set) or write (set)
* bit 1 -- rw-ahead when set
* bit 2 -- barrier
* bit 3 -- fail fast, don't want low level driver retries
*/
#define BIO_RW 0
#define BIO_RW_AHEAD 1
#define BIO_RW_BARRIER 2
#define BIO_RW_FAILFAST 3
/*
* various member access, note that bio_data should of course not be used
* on highmem page vectors
*/
#define bio_iovec_idx(bio, idx) (&((bio)->bi_io_vec[(idx)]))
#define bio_iovec(bio) bio_iovec_idx((bio), (bio)->bi_idx)
#define bio_page(bio) bio_iovec((bio))->bv_page
#define bio_offset(bio) bio_iovec((bio))->bv_offset
#define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx)
#define bio_sectors(bio) ((bio)->bi_size >> 9)
#define bio_cur_sectors(bio) (bio_iovec(bio)->bv_len >> 9)
#define bio_data(bio) (page_address(bio_page((bio))) + bio_offset((bio)))
#define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER))
/*
* will die
*/
#define bio_to_phys(bio) (page_to_phys(bio_page((bio))) + (unsigned long) bio_offset((bio)))
#define bvec_to_phys(bv) (page_to_phys((bv)->bv_page) + (unsigned long) (bv)->bv_offset)
/*
* queues that have highmem support enabled may still need to revert to
* PIO transfers occasionally and thus map high pages temporarily. For
* permanent PIO fall back, user is probably better off disabling highmem
* I/O completely on that queue (see ide-dma for example)
*/
#define __bio_kmap_atomic(bio, idx, kmtype) \
(kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page, kmtype) + \
bio_iovec_idx((bio), (idx))->bv_offset)
#define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr, kmtype)
/*
* merge helpers etc
*/
#define __BVEC_END(bio) bio_iovec_idx((bio), (bio)->bi_vcnt - 1)
#define __BVEC_START(bio) bio_iovec_idx((bio), 0)
#define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \
((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
#define BIOVEC_VIRT_MERGEABLE(vec1, vec2) \
((((bvec_to_phys((vec1)) + (vec1)->bv_len) | bvec_to_phys((vec2))) & (BIO_VMERGE_BOUNDARY - 1)) == 0)
#define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
#define BIOVEC_SEG_BOUNDARY(q, b1, b2) \
__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, (q)->seg_boundary_mask)
#define BIO_SEG_BOUNDARY(q, b1, b2) \
BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
#define bio_io_error(bio, bytes) bio_endio((bio), (bytes), -EIO)
/*
* drivers should not use the __ version unless they _really_ want to
* run through the entire bio and not just pending pieces
*/
#define __bio_for_each_segment(bvl, bio, i, start_idx) \
for (bvl = bio_iovec_idx((bio), (start_idx)), i = (start_idx); \
i < (bio)->bi_vcnt; \
bvl++, i++)
#define bio_for_each_segment(bvl, bio, i) \
__bio_for_each_segment(bvl, bio, i, (bio)->bi_idx)
/*
* get a reference to a bio, so it won't disappear. the intended use is
* something like:
*
* bio_get(bio);
* submit_bio(rw, bio);
* if (bio->bi_flags ...)
* do_something
* bio_put(bio);
*
* without the bio_get(), it could potentially complete I/O before submit_bio
* returns. and then bio would be freed memory when if (bio->bi_flags ...)
* runs
*/
#define bio_get(bio) atomic_inc(&(bio)->bi_cnt)
/*
* A bio_pair is used when we need to split a bio.
* This can only happen for a bio that refers to just one
* page of data, and in the unusual situation when the
* page crosses a chunk/device boundary
*
* The address of the master bio is stored in bio1.bi_private
* The address of the pool the pair was allocated from is stored
* in bio2.bi_private
*/
struct bio_pair {
struct bio bio1, bio2;
struct bio_vec bv1, bv2;
atomic_t cnt;
int error;
};
extern struct bio_pair *bio_split(struct bio *bi, mempool_t *pool,
int first_sectors);
extern mempool_t *bio_split_pool;
extern void bio_pair_release(struct bio_pair *dbio);
extern struct bio *bio_alloc(int, int);
extern void bio_put(struct bio *);
extern void bio_endio(struct bio *, unsigned int, int);
struct request_queue;
extern inline int bio_phys_segments(struct request_queue *, struct bio *);
extern inline int bio_hw_segments(struct request_queue *, struct bio *);
extern inline void __bio_clone(struct bio *, struct bio *);
extern struct bio *bio_clone(struct bio *, int);
extern inline void bio_init(struct bio *);
extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int);
extern int bio_get_nr_vecs(struct block_device *);
extern struct bio *bio_map_user(struct block_device *, unsigned long,
unsigned int, int);
extern void bio_unmap_user(struct bio *, int);
extern void bio_set_pages_dirty(struct bio *bio);
extern void bio_check_pages_dirty(struct bio *bio);
#ifdef CONFIG_HIGHMEM
/*
* remember to add offset! and never ever reenable interrupts between a
* bvec_kmap_irq and bvec_kunmap_irq!!
*
* This function MUST be inlined - it plays with the CPU interrupt flags.
* Hence the `extern inline'.
*/
extern inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
{
unsigned long addr;
/*
* might not be a highmem page, but the preempt/irq count
* balancing is a lot nicer this way
*/
local_irq_save(*flags);
addr = (unsigned long) kmap_atomic(bvec->bv_page, KM_BIO_SRC_IRQ);
if (addr & ~PAGE_MASK)
BUG();
return (char *) addr + bvec->bv_offset;
}
extern inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
{
unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
kunmap_atomic((void *) ptr, KM_BIO_SRC_IRQ);
local_irq_restore(*flags);
}
#else
#define bvec_kmap_irq(bvec, flags) (page_address((bvec)->bv_page) + (bvec)->bv_offset)
#define bvec_kunmap_irq(buf, flags) do { *(flags) = 0; } while (0)
#endif
extern inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx,
unsigned long *flags)
{
return bvec_kmap_irq(bio_iovec_idx(bio, idx), flags);
}
#define __bio_kunmap_irq(buf, flags) bvec_kunmap_irq(buf, flags)
#define bio_kmap_irq(bio, flags) \
__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
#define bio_kunmap_irq(buf,flags) __bio_kunmap_irq(buf, flags)
#endif /* __LINUX_BIO_H */