Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/* This file is derived from the GAS 2.1.4 assembler control file.
   The GAS product is under the GNU General Public License, version 2 or later.
   As such, this file is also under that license.

   If the file format changes in the COFF object, this file should be
   subsequently updated to reflect the changes.

   The actual loader module only uses a few of these structures. The full
   set is documented here because I received the full set. If you wish
   more information about COFF, then O'Reilly has a very excellent book.
*/


#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
#define  E_FILNMLEN 14   /* Number of characters in a file name           */
#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */

/*
 * These defines are byte order independent. There is no alignment of fields
 * permitted in the structures. Therefore they are declared as characters
 * and the values loaded from the character positions. It also makes it
 * nice to have it "endian" independent.
 */

 
/* Load a short int from the following tables with little-endian formats */
#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
                                  ((unsigned short)((unsigned char)ps[0]))))


/* Load a long int from the following tables with little-endian formats */
#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
                                 ((unsigned long)((unsigned char)ps[2])<<16) |\
                                 ((unsigned long)((unsigned char)ps[1])<<8)  |\
                                 ((unsigned long)((unsigned char)ps[0])))))

 
/* Load a short int from the following tables with big-endian formats */
#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
                                  ((unsigned short)((unsigned char)ps[1]))))


/* Load a long int from the following tables with big-endian formats */
#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
                                 ((unsigned long)((unsigned char)ps[1])<<16) |\
                                 ((unsigned long)((unsigned char)ps[2])<<8)  |\
                                 ((unsigned long)((unsigned char)ps[3])))))


/* These may be overridden later by brain dead implementations which generate
   a big-endian header with little-endian data. In that case, generate a
   replacement macro which tests a flag and uses either of the two above
   as appropriate. */


#define COFF_LONG(v)   COFF_LONG_L(v)
#define COFF_SHORT(v)  COFF_SHORT_L(v)

/*** coff information for Intel 386/486.  */

/********************** FILE HEADER **********************/

struct COFF_filehdr {
        char f_magic[2];        /* magic number                 */
        char f_nscns[2];        /* number of sections           */
        char f_timdat[4];       /* time & date stamp            */
        char f_symptr[4];       /* file pointer to symtab       */
        char f_nsyms[4];        /* number of symtab entries     */
        char f_opthdr[2];       /* sizeof(optional hdr)         */
        char f_flags[2];        /* flags                        */
};

/*
 *   Bits for f_flags:
 *
 *      F_RELFLG        relocation info stripped from file
 *      F_EXEC          file is executable  (i.e. no unresolved external
 *                      references)
 *      F_LNNO          line numbers stripped from file
 *      F_LSYMS         local symbols stripped from file
 *      F_MINMAL        this is a minimal object file (".m") output of fextract
 *      F_UPDATE        this is a fully bound update file, output of ogen
 *      F_SWABD         this file has had its bytes swabbed (in names)
 *      F_AR16WR        this file has the byte ordering of an AR16WR
 *                      (e.g. 11/70) machine
 *      F_AR32WR        this file has the byte ordering of an AR32WR machine
 *                      (e.g. vax and iNTEL 386)
 *      F_AR32W         this file has the byte ordering of an AR32W machine
 *                      (e.g. 3b,maxi)
 *      F_PATCH         file contains "patch" list in optional header
 *      F_NODF          (minimal file only) no decision functions for
 *                      replaced functions
 */


#define  COFF_F_RELFLG          0000001
#define  COFF_F_EXEC            0000002
#define  COFF_F_LNNO            0000004
#define  COFF_F_LSYMS           0000010
#define  COFF_F_MINMAL          0000020
#define  COFF_F_UPDATE          0000040
#define  COFF_F_SWABD           0000100
#define  COFF_F_AR16WR          0000200
#define  COFF_F_AR32WR          0000400
#define  COFF_F_AR32W           0001000
#define  COFF_F_PATCH           0002000
#define  COFF_F_NODF            0002000

#define COFF_I386MAGIC          0x14c   /* Linux's system    */

#if 0   /* Perhaps, someday, these formats may be used.      */
#define COFF_I386PTXMAGIC       0x154
#define COFF_I386AIXMAGIC       0x175   /* IBM's AIX system  */
#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
                          && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
                          && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)

#else
#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
#endif

#define COFF_FILHDR     struct COFF_filehdr
#define COFF_FILHSZ     sizeof(COFF_FILHDR)

/********************** AOUT "OPTIONAL HEADER" **********************/

/* Linux COFF must have this "optional" header. Standard COFF has no entry
   location for the "entry" point. They normally would start with the first
   location of the .text section. This is not a good idea for linux. So,
   the use of this "optional" header is not optional. It is required.

   Do not be tempted to assume that the size of the optional header is
   a constant and simply index the next byte by the size of this structure.
   Use the 'f_opthdr' field in the main coff header for the size of the
   structure actually written to the file!!
*/


typedef struct
{
  char  magic[2];               /* type of file                          */
  char  vstamp[2];              /* version stamp                         */
  char  tsize[4];               /* text size in bytes, padded to FW bdry */
  char  dsize[4];               /* initialized   data "   "              */
  char  bsize[4];               /* uninitialized data "   "              */
  char  entry[4];               /* entry pt.                             */
  char  text_start[4];          /* base of text used for this file       */
  char  data_start[4];          /* base of data used for this file       */
}
COFF_AOUTHDR;

#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))

#define COFF_STMAGIC    0401
#define COFF_OMAGIC     0404
#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
#define COFF_SHMAGIC    0443    /* shared library header                   */

/********************** SECTION HEADER **********************/

struct COFF_scnhdr {
  char          s_name[8];      /* section name                     */
  char          s_paddr[4];     /* physical address, aliased s_nlib */
  char          s_vaddr[4];     /* virtual address                  */
  char          s_size[4];      /* section size                     */
  char          s_scnptr[4];    /* file ptr to raw data for section */
  char          s_relptr[4];    /* file ptr to relocation           */
  char          s_lnnoptr[4];   /* file ptr to line numbers         */
  char          s_nreloc[2];    /* number of relocation entries     */
  char          s_nlnno[2];     /* number of line number entries    */
  char          s_flags[4];     /* flags                            */
};

#define COFF_SCNHDR     struct COFF_scnhdr
#define COFF_SCNHSZ     sizeof(COFF_SCNHDR)

/*
 * names of "special" sections
 */


#define COFF_TEXT       ".text"
#define COFF_DATA       ".data"
#define COFF_BSS        ".bss"
#define COFF_COMMENT    ".comment"
#define COFF_LIB        ".lib"

#define COFF_SECT_TEXT  0      /* Section for instruction code             */
#define COFF_SECT_DATA  1      /* Section for initialized globals          */
#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */

#define COFF_STYP_REG     0x00 /* regular segment                          */
#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
#define COFF_STYP_GROUP   0x04 /* group segment                            */
#define COFF_STYP_PAD     0x08 /* .pad segment                             */
#define COFF_STYP_COPY    0x10 /* copy section                             */
#define COFF_STYP_TEXT    0x20 /* .text segment                            */
#define COFF_STYP_DATA    0x40 /* .data segment                            */
#define COFF_STYP_BSS     0x80 /* .bss segment                             */
#define COFF_STYP_INFO   0x200 /* .comment section                         */
#define COFF_STYP_OVER   0x400 /* overlay section                          */
#define COFF_STYP_LIB    0x800 /* library section                          */

/*
 * Shared libraries have the following section header in the data field for
 * each library.
 */


struct COFF_slib {
  char          sl_entsz[4];    /* Size of this entry               */
  char          sl_pathndx[4];  /* size of the header field         */
};

#define COFF_SLIBHD     struct COFF_slib
#define COFF_SLIBSZ     sizeof(COFF_SLIBHD)

/********************** LINE NUMBERS **********************/

/* 1 line number entry for every "breakpointable" source line in a section.
 * Line numbers are grouped on a per function basis; first entry in a function
 * grouping will have l_lnno = 0 and in place of physical address will be the
 * symbol table index of the function name.
 */


struct COFF_lineno {
  union {
    char l_symndx[4];   /* function name symbol index, iff l_lnno == 0*/
    char l_paddr[4];    /* (physical) address of line number    */
  } l_addr;
  char l_lnno[2];       /* line number          */
};

#define COFF_LINENO     struct COFF_lineno
#define COFF_LINESZ     6

/********************** SYMBOLS **********************/

#define COFF_E_SYMNMLEN  8      /* # characters in a short symbol name  */
#define COFF_E_FILNMLEN 14      /* # characters in a file name          */
#define COFF_E_DIMNUM    4      /* # array dimensions in auxiliary entry */

/*
 *  All symbols and sections have the following definition
 */


struct COFF_syment
{
  union {
    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
    struct {
      char e_zeroes[4];         /* Leading zeros */
      char e_offset[4];         /* Offset if this is a header section */
    } e;
  } e;

  char e_value[4];              /* Value (address) of the segment */
  char e_scnum[2];              /* Section number */
  char e_type[2];               /* Type of section */
  char e_sclass[1];             /* Loader class */
  char e_numaux[1];             /* Number of auxiliary entries which follow */
};

#define COFF_N_BTMASK   (0xf)   /* Mask for important class bits */
#define COFF_N_TMASK    (0x30)  /* Mask for important type bits  */
#define COFF_N_BTSHFT   (4)     /* # bits to shift class field   */
#define COFF_N_TSHIFT   (2)     /* # bits to shift type field    */

/*
 *  Auxiliary entries because the main table is too limiting.
 */

 
union COFF_auxent {

/*
 *  Debugger information
 */


  struct {
    char x_tagndx[4];           /* str, un, or enum tag indx */
    union {
      struct {
        char  x_lnno[2];        /* declaration line number */
        char  x_size[2];        /* str/union/array size */
      } x_lnsz;
      char x_fsize[4];          /* size of function */
    } x_misc;

    union {
      struct {                  /* if ISFCN, tag, or .bb */
        char x_lnnoptr[4];      /* ptr to fcn line # */
        char x_endndx[4];       /* entry ndx past block end */
      } x_fcn;

      struct {                  /* if ISARY, up to 4 dimen. */
        char x_dimen[E_DIMNUM][2];
      } x_ary;
    } x_fcnary;

    char x_tvndx[2];    /* tv index */
  } x_sym;

/*
 *   Source file names (debugger information)
 */


  union {
    char x_fname[E_FILNMLEN];
    struct {
      char x_zeroes[4];
      char x_offset[4];
    } x_n;
  } x_file;

/*
 *   Section information
 */


  struct {
    char x_scnlen[4];   /* section length */
    char x_nreloc[2];   /* # relocation entries */
    char x_nlinno[2];   /* # line numbers */
  } x_scn;

/*
 *   Transfer vector (branch table)
 */

 
  struct {
    char x_tvfill[4];   /* tv fill value */
    char x_tvlen[2];    /* length of .tv */
    char x_tvran[2][2]; /* tv range */
  } x_tv;               /* info about .tv section (in auxent of symbol .tv)) */
};

#define COFF_SYMENT     struct COFF_syment
#define COFF_SYMESZ     18     
#define COFF_AUXENT     union COFF_auxent
#define COFF_AUXESZ     18

#define COFF_ETEXT      "etext"

/********************** RELOCATION DIRECTIVES **********************/

struct COFF_reloc {
  char r_vaddr[4];        /* Virtual address of item    */
  char r_symndx[4];       /* Symbol index in the symtab */
  char r_type[2];         /* Relocation type            */
};

#define COFF_RELOC struct COFF_reloc
#define COFF_RELSZ 10

#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4

/* For new sections we haven't heard of before */
#define COFF_DEF_SECTION_ALIGNMENT       4