Rev 1618 |
Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
/*
* Project: S.Ha.R.K.
*
* Coordinators:
* Giorgio Buttazzo <giorgio@sssup.it>
* Paolo Gai <pj@gandalf.sssup.it>
*
* Authors :
* Paolo Gai <pj@gandalf.sssup.it>
* Massimiliano Giorgi <massy@gandalf.sssup.it>
* Luca Abeni <luca@gandalf.sssup.it>
* (see the web pages for full authors list)
*
* ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
*
* http://www.sssup.it
* http://retis.sssup.it
* http://shark.sssup.it
*/
/**
------------
CVS : $Id: 8042.h,v 1.1 2003-03-24 10:54:16 pj Exp $
File: $File$
Revision: $Revision: 1.1 $
Last update: $Date: 2003-03-24 10:54:16 $
------------
8042.h
Interface between high level drivers
and the 8042 keyboard and PS/2 mouse controller
Revision: 1.0
Last update: 22/Mar/1999
Created by Massimiliano Giorgi, modified by Paolo Gai to support the
kernel 4.0.0
**/
/*
* Copyright (C) 2000 Paolo Gai
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __8042_H__
#define __8042_H__
#include "ll/sys/cdefs.h"
__BEGIN_DECLS
#define C8042_KEYBOARDIRQ 1
#define C8042_PS2IRQ 12
/*
* init, enable, disable, get data for the keyboard
*/
int C8042_keyboardinit(PID task);
int C8042_keyboarddisable(void);
int C8042_keyboardenable(void);
int C8042_keyboardget(BYTE *data,BYTE access);
/*
* init, enable, disable, get data for the ps/2 mouse (auxiliary port)
*/
int C8042_auxinit(PID task);
int C8042_auxportdisable(void);
int C8042_auxportenable(void);
int C8042_auxget(BYTE *data,BYTE access);
int C8042_auxend(void);
/* test if there is a PS/2 mouse on the aux port */
int C8042_ps2mousepresent(void);
/*
* keyboard led controll
*/
void C8042_keyboardleds(BYTE numlock, BYTE cps, BYTE scrolllock);
/*
*
* from Linux OS kernel 2.2.2
* (see GPL license)
* with some modification
*/
/*
* Keyboard Controller Registers
*/
#define KBD_STATUS_REG 0x64 /* Status register (R) */
#define KBD_CNTL_REG 0x64 /* Controller command register (W) */
#define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */
/*
* Keyboard Controller Commands
*/
#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
initiated by the auxiliary device */
#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
/* added by me (MG) */
#define KBD_CCMD_GET_MODE 0xCA /* Get controller mode (AT or PS/2) */
#define KBD_CREPLY_PS2MODE 0x01 /* PS2 mode */
#define KBD_CREPLY_ATMODE 0x00 /* AT mode */
#define KBD_CREPLY_GETMODEMASK 0x01 /* mask value for CCMD_GET_MODE */
/*
* Keyboard Commands
*/
#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
#define KBD_CMD_RESET 0xFF /* Reset */
/* added by me (MG) */
#define KBD_CMD_SET_ALL_TYPEMATIC 0xF7 /* Set all key typematic */
#define KBD_LED_NUMLOCK 0x02
#define KBD_LED_CAPSLOCK 0x04
#define KBD_LED_SCROLLLOCK 0x01
#define KBD_LED_MASK 0x07
/*
* Keyboard Replies
*/
#define KBD_REPLY_POR 0xAA /* Power on reset */
#define KBD_REPLY_ACK 0xFA /* Command ACK */
#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
/* added by me (MG) */
#define KBD_REPLY_KISTOK 0x00 /* Keyboard Interface Self Test OK */
#define KBD_REPLY_CSTOK 0x55 /* Controller self test OK */
#define KBD_REPLY_MISTOK 0x00 /* Mouse Interface Self Test OK */
/*
* Status Register Bits
*/
#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
#define KBD_STAT_PERR 0x80 /* Parity error */
#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
/*
* Controller Mode Register Bits
*/
#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
#define KBD_MODE_SYS 0x04 /* The system flag (?) */
#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
#define KBD_MODE_RFU 0x80
/*
* Mouse Commands
*/
#define AUX_SET_RES 0xE8 /* Set resolution */
#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */
#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */
#define AUX_GET_SCALE 0xE9 /* Get scaling factor */
#define AUX_SET_STREAM 0xEA /* Set stream mode */
#define AUX_SET_SAMPLE 0xF3 /* Set sample rate */
#define AUX_ENABLE_DEV 0xF4 /* Enable aux device */
#define AUX_DISABLE_DEV 0xF5 /* Disable aux device */
#define AUX_RESET 0xFF /* Reset aux device */
#define AUX_ACK 0xFA /* Command byte ACK. */
#define AUX_BUF_SIZE 2048 /* This might be better divisible by
three to make overruns stay in sync
but then the read function would
need
*/
__END_DECLS
#endif