Rev 54 |
Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
#include "timing.h"
#include "vgaregs.h"
/*
* Setup VGA registers for SVGA mode timing. Adapted from XFree86,
* vga256/vga/vgaHW.c vgaHWInit().
*
* Note that VGA registers are set up in a way that is common for
* SVGA modes. This is not particularly useful for standard VGA
* modes, since VGA does not have a clean packed-pixel mode.
*/
void __svgalib_setup_VGA_registers(unsigned char *moderegs, ModeTiming * modetiming,
ModeInfo * modeinfo)
{
int i;
/* Sync Polarities */
if ((modetiming->flags & (PHSYNC | NHSYNC)) &&
(modetiming->flags & (PVSYNC | NVSYNC))) {
/*
* If both horizontal and vertical polarity are specified,
* set them as specified.
*/
moderegs[VGA_MISCOUTPUT] = 0x23;
if (modetiming->flags & NHSYNC)
moderegs[VGA_MISCOUTPUT] |= 0x40;
if (modetiming->flags & NVSYNC)
moderegs[VGA_MISCOUTPUT] |= 0x80;
} else {
/*
* Otherwise, calculate the polarities according to
* monitor standards.
*/
if (modetiming->VDisplay < 400)
moderegs[VGA_MISCOUTPUT] = 0xA3;
else if (modetiming->VDisplay < 480)
moderegs[VGA_MISCOUTPUT] = 0x63;
else if (modetiming->VDisplay < 768)
moderegs[VGA_MISCOUTPUT] = 0xE3;
else
moderegs[VGA_MISCOUTPUT] = 0x23;
}
/* Sequencer */
moderegs[VGA_SR0] = 0x00;
if (modeinfo->bitsPerPixel == 4)
moderegs[VGA_SR0] = 0x02;
moderegs[VGA_SR1] = 0x01;
moderegs[VGA_SR2] = 0x0F; /* Bitplanes. */
moderegs[VGA_SR3] = 0x00;
moderegs[VGA_SR4] = 0x0E;
if (modeinfo->bitsPerPixel == 4)
moderegs[VGA_SR4] = 0x06;
/* CRTC Timing */
moderegs[VGA_CR0] = (modetiming->CrtcHTotal / 8) - 5;
moderegs[VGA_CR1] = (modetiming->CrtcHDisplay / 8) - 1;
moderegs[VGA_CR2] = (modetiming->CrtcHSyncStart / 8) - 1;
moderegs[VGA_CR3] = ((modetiming->CrtcHSyncEnd / 8) & 0x1F) | 0x80;
moderegs[VGA_CR4] = (modetiming->CrtcHSyncStart / 8);
moderegs[VGA_CR5] = (((modetiming->CrtcHSyncEnd / 8) & 0x20) << 2)
| ((modetiming->CrtcHSyncEnd / 8) & 0x1F);
moderegs[VGA_CR6] = (modetiming->CrtcVTotal - 2) & 0xFF;
moderegs[VGA_CR7] = (((modetiming->CrtcVTotal - 2) & 0x100) >> 8)
| (((modetiming->CrtcVDisplay - 1) & 0x100) >> 7)
| ((modetiming->CrtcVSyncStart & 0x100) >> 6)
| (((modetiming->CrtcVSyncStart) & 0x100) >> 5)
| 0x10
| (((modetiming->CrtcVTotal - 2) & 0x200) >> 4)
| (((modetiming->CrtcVDisplay - 1) & 0x200) >> 3)
| ((modetiming->CrtcVSyncStart & 0x200) >> 2);
moderegs[VGA_CR8] = 0x00;
moderegs[VGA_CR9] = ((modetiming->CrtcVSyncStart & 0x200) >> 4) | 0x40;
if (modetiming->flags & DOUBLESCAN)
moderegs[VGA_CR9] |= 0x80;
moderegs[VGA_CRA] = 0x00;
moderegs[VGA_CRB] = 0x00;
moderegs[VGA_CRC] = 0x00;
moderegs[VGA_CRD] = 0x00;
moderegs[VGA_CRE] = 0x00;
moderegs[VGA_CRF] = 0x00;
moderegs[VGA_CR10] = modetiming->CrtcVSyncStart & 0xFF;
moderegs[VGA_CR11] = (modetiming->CrtcVSyncEnd & 0x0F) | 0x20;
moderegs[VGA_CR12] = (modetiming->CrtcVDisplay - 1) & 0xFF;
moderegs[VGA_CR13] = modeinfo->lineWidth >> 4; /* Just a guess. */
moderegs[VGA_CR14] = 0x00;
moderegs[VGA_CR15] = modetiming->CrtcVSyncStart & 0xFF;
moderegs[VGA_CR16] = (modetiming->CrtcVSyncStart + 1) & 0xFF;
moderegs[VGA_CR17] = 0xC3;
if (modeinfo->bitsPerPixel == 4)
moderegs[VGA_CR17] = 0xE3;
moderegs[VGA_CR18] = 0xFF;
/* Graphics Controller */
moderegs[VGA_GR0] = 0x00;
moderegs[VGA_GR1] = 0x00;
moderegs[VGA_GR2] = 0x00;
moderegs[VGA_GR3] = 0x00;
moderegs[VGA_GR4] = 0x00;
moderegs[VGA_GR5] = 0x40;
if (modeinfo->bitsPerPixel == 4)
moderegs[VGA_GR5] = 0x02;
moderegs[VGA_GR6] = 0x05;
moderegs[VGA_GR7] = 0x0F;
moderegs[VGA_GR8] = 0xFF;
/* Attribute Controller */
for (i = 0; i < 16; i++)
moderegs[VGA_AR0 + i] = i;
moderegs[VGA_AR10] = 0x41;
if (modeinfo->bitsPerPixel == 4)
moderegs[VGA_AR10] = 0x01; /* was 0x81 */
/* Attribute register 0x11 is the overscan color.
Should have no affect in svga modes. */
moderegs[VGA_AR11] = 0x00;
moderegs[VGA_AR12] = 0x0F;
moderegs[VGA_AR13] = 0x00;
moderegs[VGA_AR14] = 0x00;
}