Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
    sis96x.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring

    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/


/*
    This module must be considered BETA unless and until
    the chipset manufacturer releases a datasheet.
    The register definitions are based on the SiS630.

    This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
    for just about every machine for which users have reported.
    If this module isn't detecting your 96x south bridge, have a
    look there.

    We assume there can only be one SiS96x with one SMBus interface.
*/


/* #define DEBUG */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <asm/io.h>

/*
        HISTORY:
        2003-05-11      1.0.0   Updated from lm_sensors project for kernel 2.5
                                (was i2c-sis645.c from lm_sensors 2.7.0)
*/

#define SIS96x_VERSION "1.0.0"

/* SiS96x SMBus PCI device ID */
#define PCI_DEVICE_ID_SI_SMBUS 0x16

/* base address register in PCI config space */
#define SIS96x_BAR 0x04

/* SiS96x SMBus registers */
#define SMB_STS      0x00
#define SMB_EN       0x01
#define SMB_CNT      0x02
#define SMB_HOST_CNT 0x03
#define SMB_ADDR     0x04
#define SMB_CMD      0x05
#define SMB_PCOUNT   0x06
#define SMB_COUNT    0x07
#define SMB_BYTE     0x08
#define SMB_DEV_ADDR 0x10
#define SMB_DB0      0x11
#define SMB_DB1      0x12
#define SMB_SAA      0x13

/* register count for request_region */
#define SMB_IOSIZE 0x20

/* Other settings */
#define MAX_TIMEOUT 500

/* SiS96x SMBus constants */
#define SIS96x_QUICK      0x00
#define SIS96x_BYTE       0x01
#define SIS96x_BYTE_DATA  0x02
#define SIS96x_WORD_DATA  0x03
#define SIS96x_PROC_CALL  0x04
#define SIS96x_BLOCK_DATA 0x05

static struct i2c_adapter sis96x_adapter;
static u16 sis96x_smbus_base = 0;

static inline u8 sis96x_read(u8 reg)
{
        return inb(sis96x_smbus_base + reg) ;
}

static inline void sis96x_write(u8 reg, u8 data)
{
        outb(data, sis96x_smbus_base + reg) ;
}

/* Execute a SMBus transaction.
   int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
 */

static int sis96x_transaction(int size)
{
        int temp;
        int result = 0;
        int timeout = 0;

        dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);

        /* Make sure the SMBus host is ready to start transmitting */
        if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {

                dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
                        "Resetting...\n", temp);

                /* kill the transaction */
                sis96x_write(SMB_HOST_CNT, 0x20);

                /* check it again */
                if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
                        dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
                        return -1;
                } else {
                        dev_dbg(&sis96x_adapter.dev, "Successful\n");
                }
        }

        /* Turn off timeout interrupts, set fast host clock */
        sis96x_write(SMB_CNT, 0x20);

        /* clear all (sticky) status flags */
        temp = sis96x_read(SMB_STS);
        sis96x_write(SMB_STS, temp & 0x1e);

        /* start the transaction by setting bit 4 and size bits */
        sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07));

        /* We will always wait for a fraction of a second! */
        do {
                i2c_delay(1);
                temp = sis96x_read(SMB_STS);
        } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));

        /* If the SMBus is still busy, we give up */
        if (timeout >= MAX_TIMEOUT) {
                dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
                result = -1;
        }

        /* device error - probably missing ACK */
        if (temp & 0x02) {
                dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
                result = -1;
        }

        /* bus collision */
        if (temp & 0x04) {
                dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
                result = -1;
        }

        /* Finish up by resetting the bus */
        sis96x_write(SMB_STS, temp);
        if ((temp = sis96x_read(SMB_STS))) {
                dev_dbg(&sis96x_adapter.dev, "Failed reset at "
                        "end of transaction! (0x%02x)\n", temp);
        }

        return result;
}

/* Return -1 on error. */
static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
                         unsigned short flags, char read_write,
                         u8 command, int size, union i2c_smbus_data * data)
{

        switch (size) {
        case I2C_SMBUS_QUICK:
                sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
                size = SIS96x_QUICK;
                break;

        case I2C_SMBUS_BYTE:
                sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
                if (read_write == I2C_SMBUS_WRITE)
                        sis96x_write(SMB_CMD, command);
                size = SIS96x_BYTE;
                break;

        case I2C_SMBUS_BYTE_DATA:
                sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
                sis96x_write(SMB_CMD, command);
                if (read_write == I2C_SMBUS_WRITE)
                        sis96x_write(SMB_BYTE, data->byte);
                size = SIS96x_BYTE_DATA;
                break;

        case I2C_SMBUS_PROC_CALL:
        case I2C_SMBUS_WORD_DATA:
                sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
                sis96x_write(SMB_CMD, command);
                if (read_write == I2C_SMBUS_WRITE) {
                        sis96x_write(SMB_BYTE, data->word & 0xff);
                        sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
                }
                size = (size == I2C_SMBUS_PROC_CALL ?
                        SIS96x_PROC_CALL : SIS96x_WORD_DATA);
                break;

        case I2C_SMBUS_BLOCK_DATA:
                /* TO DO: */
                dev_info(&adap->dev, "SMBus block not implemented!\n");
                return -1;
                break;

        default:
                dev_info(&adap->dev, "Unsupported I2C size\n");
                return -1;
                break;
        }

        if (sis96x_transaction(size))
                return -1;

        if ((size != SIS96x_PROC_CALL) &&
                ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
                return 0;

        switch (size) {
        case SIS96x_BYTE:
        case SIS96x_BYTE_DATA:
                data->byte = sis96x_read(SMB_BYTE);
                break;

        case SIS96x_WORD_DATA:
        case SIS96x_PROC_CALL:
                data->word = sis96x_read(SMB_BYTE) +
                                (sis96x_read(SMB_BYTE + 1) << 8);
                break;
        }
        return 0;
}

static u32 sis96x_func(struct i2c_adapter *adapter)
{
        return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
            I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
            I2C_FUNC_SMBUS_PROC_CALL;
}

static struct i2c_algorithm smbus_algorithm = {
        .name           = "Non-I2C SMBus adapter",
        .id             = I2C_ALGO_SMBUS,
        .smbus_xfer     = sis96x_access,
        .functionality  = sis96x_func,
};

static struct i2c_adapter sis96x_adapter = {
        .owner          = THIS_MODULE,
        .class          = I2C_ADAP_CLASS_SMBUS,
        .algo           = &smbus_algorithm,
        .name           = "unset",
};

static struct pci_device_id sis96x_ids[] = {

        {
                .vendor =       PCI_VENDOR_ID_SI,
                .device =       PCI_DEVICE_ID_SI_SMBUS,
                .subvendor =    PCI_ANY_ID,
                .subdevice =    PCI_ANY_ID,
        },

        { 0, }
};

static int __devinit sis96x_probe(struct pci_dev *dev,
                                const struct pci_device_id *id)
{
        u16 ww = 0;
        int retval;

        if (sis96x_smbus_base) {
                dev_err(&dev->dev, "Only one device supported.\n");
                return -EBUSY;
        }

        pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
        if (PCI_CLASS_SERIAL_SMBUS != ww) {
                dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
                return -ENODEV;
        }

        sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
        if (!sis96x_smbus_base) {
                dev_err(&dev->dev, "SiS96x SMBus base address "
                        "not initialized!\n");
                return -EINVAL;
        }
        dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
                        sis96x_smbus_base);

        /* Everything is happy, let's grab the memory and set things up. */
        if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
                dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
                        "already in use!\n", sis96x_smbus_base,
                        sis96x_smbus_base + SMB_IOSIZE - 1);

                sis96x_smbus_base = 0;
                return -EINVAL;
        }

        /* set up the driverfs linkage to our parent device */
        sis96x_adapter.dev.parent = &dev->dev;

        snprintf(sis96x_adapter.name, I2C_NAME_SIZE,
                "SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);

        if ((retval = i2c_add_adapter(&sis96x_adapter))) {
                dev_err(&dev->dev, "Couldn't register adapter!\n");
                release_region(sis96x_smbus_base, SMB_IOSIZE);
                sis96x_smbus_base = 0;
        }

        return retval;
}

static void __devexit sis96x_remove(struct pci_dev *dev)
{
        if (sis96x_smbus_base) {
                i2c_del_adapter(&sis96x_adapter);
                release_region(sis96x_smbus_base, SMB_IOSIZE);
                sis96x_smbus_base = 0;
        }
}

static struct pci_driver sis96x_driver = {
        .name           = "sis96x smbus",
        .id_table       = sis96x_ids,
        .probe          = sis96x_probe,
        .remove         = __devexit_p(sis96x_remove),
};

static int __init i2c_sis96x_init(void)
{
        printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION);
        return pci_module_init(&sis96x_driver);
}

static void __exit i2c_sis96x_exit(void)
{
        pci_unregister_driver(&sis96x_driver);
}

MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
MODULE_DESCRIPTION("SiS96x SMBus driver");
MODULE_LICENSE("GPL");

/* Register initialization functions using helper macros */
module_init(i2c_sis96x_init);
module_exit(i2c_sis96x_exit);