Subversion Repositories shark

Rev

Rev 600 | Rev 775 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * (C) 2001  Dave Jones, Arjan van de ven.
 * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
 *
 *  Licensed under the terms of the GNU GPL License version 2.
 *  Based upon reverse engineered information, and on Intel documentation
 *  for chipsets ICH2-M and ICH3-M.
 *
 *  Many thanks to Ducrot Bruno for finding and fixing the last
 *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
 *  for extensive testing.
 *
 *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
 */



/*********************************************************************
 *                        SPEEDSTEP - DEFINITIONS                    *
 *********************************************************************/


#include <linuxcomp.h>

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/slab.h>

#include "speedstep-lib.h"


/* speedstep_chipset:
 *   It is necessary to know which chipset is used. As accesses to
 * this device occur at various places in this module, we need a
 * static struct pci_dev * pointing to that device.
 */

static struct pci_dev                   *speedstep_chipset_dev;


/* speedstep_processor
 */

static unsigned int                     speedstep_processor = 0;


/*
 *   There are only two frequency states for each processor. Values
 * are in kHz for the time being.
 */

static struct cpufreq_frequency_table speedstep_freqs[] = {
        {SPEEDSTEP_HIGH,        0},
        {SPEEDSTEP_LOW,         0},
        {0,                     CPUFREQ_TABLE_END},
};


/* DEBUG
 *   Define it if you want verbose debug output, e.g. for bug reporting
 */

#define SPEEDSTEP_DEBUG

#ifdef SPEEDSTEP_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif


/**
 * speedstep_set_state - set the SpeedStep state
 * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
 *
 *   Tries to change the SpeedStep state.
 */

static void speedstep_set_state (unsigned int state, unsigned int notify)
{
        u32                     pmbase;
        u8                      pm2_blk;
        u8                      value;
        unsigned long           flags;
        struct cpufreq_freqs    freqs;

        if (!speedstep_chipset_dev || (state > 0x1))
                return;

        freqs.old = speedstep_get_processor_frequency(speedstep_processor);
        freqs.new = speedstep_freqs[state].frequency;
        freqs.cpu = 0; /* speedstep.c is UP only driver */
       
        if (notify)
                cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

        /* get PMBASE */
        pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
        if (!(pmbase & 0x01))
        {
                printk(KERN_ERR "cpufreq: could not find speedstep register\n");
                return;
        }

        pmbase &= 0xFFFFFFFE;
        if (!pmbase) {
                printk(KERN_ERR "cpufreq: could not find speedstep register\n");
                return;
        }

        /* Disable IRQs */
        local_irq_save(flags);

        /* read state */
        value = inb(pmbase + 0x50);

        dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);

        /* write new state */
        value &= 0xFE;
        value |= state;

        dprintk(KERN_DEBUG "cpufreq: writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);

        /* Disable bus master arbitration */
        pm2_blk = inb(pmbase + 0x20);
        pm2_blk |= 0x01;
        outb(pm2_blk, (pmbase + 0x20));

        /* Actual transition */
        outb(value, (pmbase + 0x50));

        /* Restore bus master arbitration */
        pm2_blk &= 0xfe;
        outb(pm2_blk, (pmbase + 0x20));

        /* check if transition was successful */
        value = inb(pmbase + 0x50);

        /* Enable IRQs */
        local_irq_restore(flags);

        dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);

        if (state == (value & 0x1)) {
                dprintk (KERN_INFO "cpufreq: change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
        } else {
                printk (KERN_ERR "cpufreq: change failed - I/O error\n");
        }

        if (notify)
                cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

        return;
}


/**
 * speedstep_activate - activate SpeedStep control in the chipset
 *
 *   Tries to activate the SpeedStep status and control registers.
 * Returns -EINVAL on an unsupported chipset, and zero on success.
 */

static int speedstep_activate (void)
{
        u16             value = 0;

        if (!speedstep_chipset_dev)
                return -EINVAL;

        pci_read_config_word(speedstep_chipset_dev,
                             0x00A0, &value);
        if (!(value & 0x08)) {
                value |= 0x08;
                dprintk(KERN_DEBUG "cpufreq: activating SpeedStep (TM) registers\n");
                pci_write_config_word(speedstep_chipset_dev,
                                      0x00A0, value);
        }

        return 0;
}


/**
 * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
 *
 *   Detects PIIX4, ICH2-M and ICH3-M so far. The pci_dev points to
 * the LPC bridge / PM module which contains all power-management
 * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
 * chipset, or zero on failure.
 */

static unsigned int speedstep_detect_chipset (void)
{
        speedstep_chipset_dev = pci_find_subsys(PCI_VENDOR_ID_INTEL,
                              PCI_DEVICE_ID_INTEL_82801DB_12,
                              PCI_ANY_ID,
                              PCI_ANY_ID,
                              NULL);
        if (speedstep_chipset_dev)
                return 4; /* 4-M */

        speedstep_chipset_dev = pci_find_subsys(PCI_VENDOR_ID_INTEL,
                              PCI_DEVICE_ID_INTEL_82801CA_12,
                              PCI_ANY_ID,
                              PCI_ANY_ID,
                              NULL);
        if (speedstep_chipset_dev)
                return 3; /* 3-M */


        speedstep_chipset_dev = pci_find_subsys(PCI_VENDOR_ID_INTEL,
                              PCI_DEVICE_ID_INTEL_82801BA_10,
                              PCI_ANY_ID,
                              PCI_ANY_ID,
                              NULL);
        if (speedstep_chipset_dev) {
                /* speedstep.c causes lockups on Dell Inspirons 8000 and
                 * 8100 which use a pretty old revision of the 82815
                 * host brige. Abort on these systems.
                 */

                static struct pci_dev   *hostbridge;
                u8                      rev = 0;

                hostbridge  = pci_find_subsys(PCI_VENDOR_ID_INTEL,
                              PCI_DEVICE_ID_INTEL_82815_MC,
                              PCI_ANY_ID,
                              PCI_ANY_ID,
                              NULL);

                if (!hostbridge)
                        return 2; /* 2-M */
                       
                pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
                if (rev < 5) {
                        dprintk(KERN_INFO "cpufreq: hostbridge does not support speedstep\n");
                        speedstep_chipset_dev = NULL;
                        return 0;
                }

                return 2; /* 2-M */
        }

        return 0;
}


/**
 * speedstep_setpolicy - set a new CPUFreq policy
 * @policy: new policy
 *
 * Sets a new CPUFreq policy.
 */

static int speedstep_target (struct cpufreq_policy *policy,
                             unsigned int target_freq,
                             unsigned int relation)
{
        unsigned int    newstate = 0;

        if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
                return -EINVAL;

        speedstep_set_state(newstate, 1);

        return 0;
}


/**
 * speedstep_verify - verifies a new CPUFreq policy
 * @freq: new policy
 *
 * Limit must be within speedstep_low_freq and speedstep_high_freq, with
 * at least one border included.
 */

static int speedstep_verify (struct cpufreq_policy *policy)
{
        return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
}


static int speedstep_cpu_init(struct cpufreq_policy *policy)
{
        int             result = 0;
        unsigned int    speed;

        /* capability check */
        if (policy->cpu != 0)
                return -ENODEV;

        /* detect low and high frequency */
        result = speedstep_get_freqs(speedstep_processor,
                                     &speedstep_freqs[SPEEDSTEP_LOW].frequency,
                                     &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
                                     &speedstep_set_state);
        if (result)
                return result;

        /* get current speed setting */
        speed = speedstep_get_processor_frequency(speedstep_processor);
        if (!speed)
                return -EIO;

        dprintk(KERN_INFO "cpufreq: currently at %s speed setting - %i MHz\n",
                (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
                (speed / 1000));

        /* cpuinfo and default policy values */
        policy->governor = 0; //!!!CPUFREQ_DEFAULT_GOVERNOR;
        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
        policy->cur = speed;

        /* Added by Nino */
        cpufreq_frequency_table_get_attr(&speedstep_freqs[0], policy->cpu);

        return cpufreq_frequency_table_cpuinfo(policy, &speedstep_freqs[0]);
}


static struct cpufreq_driver speedstep_driver = {
        .name           = "speedstep-ich",
        .verify         = speedstep_verify,
        .target         = speedstep_target,
        .init           = speedstep_cpu_init,
        .owner          = THIS_MODULE,
};


/**
 * speedstep_init - initializes the SpeedStep CPUFreq driver
 *
 *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
 * devices, -EINVAL on problems during initiatization, and zero on
 * success.
 */

/*static*/ int __init speedstep_ich_init(void)
{
        /* detect processor */
        speedstep_processor = speedstep_detect_processor();
        if (!speedstep_processor)
                return -ENODEV;

        /* detect chipset */
        if (!speedstep_detect_chipset()) {
                printk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
                return -ENODEV;
        }

        /* activate speedstep support */
        if (speedstep_activate())
                return -EINVAL;

        return cpufreq_register_driver(&speedstep_driver);
}


/**
 * speedstep_exit - unregisters SpeedStep support
 *
 *   Unregisters SpeedStep support.
 */

/*static*/ void __exit speedstep_ich_exit(void)
{
        cpufreq_unregister_driver(&speedstep_driver);
}


MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
MODULE_LICENSE ("GPL");

module_init(speedstep_ich_init);
module_exit(speedstep_ich_exit);