Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/* $Id: t_vb_program.c,v 1.1 2003-02-28 11:48:07 pj Exp $ */

/*
 * Mesa 3-D graphics library
 * Version:  5.0
 *
 * Copyright (C) 1999-2002  Brian Paul   All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
 * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */


/*
 * -------- Regarding NV_vertex_program --------
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * o Redistribution of the source code must contain a copyright notice
 *   and this list of conditions;
 *
 * o Redistribution in binary and source code form must contain the
 *   following Notice in the software and any documentation and/or other
 *   materials provided with the distribution; and
 *
 * o The name of Nvidia may not be used to promote or endorse software
 *   derived from the software.
 *
 * NOTICE: Nvidia hereby grants to each recipient a non-exclusive worldwide
 * royalty free patent license under patent claims that are licensable by
 * Nvidia and which are necessarily required and for which no commercially
 * viable non infringing alternative exists to make, use, sell, offer to sell,
 * import and otherwise transfer the vertex extension for the Mesa 3D Graphics
 * Library as distributed in source code and object code form.  No hardware or
 * hardware implementation (including a semiconductor implementation and chips)
 * are licensed hereunder. If a recipient makes a patent claim or institutes
 * patent litigation against Nvidia or Nvidia's customers for use or sale of
 * Nvidia products, then this license grant as to such recipient shall
 * immediately terminate and recipient immediately agrees to cease use and
 * distribution of the Mesa Program and derivatives thereof.
 *
 * THE MESA 3D GRAPHICS LIBRARY IS PROVIDED ON AN "AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING,
 * WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-NFRINGEMENT
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
 *
 * NVIDIA SHALL NOT HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION
 * LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE MESA 3D GRAPHICS
 * LIBRARY OR EVIDENCE OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDR, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * If you do not comply with this agreement, then Nvidia may cancel the license
 * and rights granted herein.
 * ---------------------------------------------
 */


/**
 * \file tnl/t_vb_program.c
 * \brief Pipeline stage for executing vertex programs
 * \author Brian Paul,  Keith Whitwell
 */



#include "glheader.h"
#include "api_noop.h"
#include "colormac.h"
#include "context.h"
#include "dlist.h"
#include "hash.h"
#include "light.h"
#include "macros.h"
#include "imports.h"
#include "mmath.h"
#include "simple_list.h"
#include "mtypes.h"
#include "vpexec.h"

#include "math/m_translate.h"

#include "t_context.h"
#include "t_pipeline.h"
#include "t_imm_api.h"
#include "t_imm_exec.h"


/**
 * \warning These values _MUST_ match the values in the OutputRegisters[]
 * array in vpparse.c!!!
 */

#define VERT_RESULT_HPOS 0
#define VERT_RESULT_COL0 1
#define VERT_RESULT_COL1 2
#define VERT_RESULT_BFC0 3
#define VERT_RESULT_BFC1 4
#define VERT_RESULT_FOGC 5
#define VERT_RESULT_PSIZ 6
#define VERT_RESULT_TEX0 7
#define VERT_RESULT_TEX1 8
#define VERT_RESULT_TEX2 9
#define VERT_RESULT_TEX3 10
#define VERT_RESULT_TEX4 11
#define VERT_RESULT_TEX5 12
#define VERT_RESULT_TEX6 13
#define VERT_RESULT_TEX7 14


/*!
 * Private storage for the vertex program pipeline stage.
 */

struct vp_stage_data {
   /** The results of running the vertex program go into these arrays. */
   GLvector4f attribs[15];

   /* These point to the attribs[VERT_RESULT_COL0, COL1, BFC0, BFC1] arrays */
   struct gl_client_array color0[2];  /**< diffuse front and back */
   struct gl_client_array color1[2];  /**< specular front and back */

   GLvector4f ndcCoords;              /**< normalized device coords */
   GLubyte *clipmask;                 /**< clip flags */
   GLubyte ormask, andmask;           /**< for clipping */
};


#define VP_STAGE_DATA(stage) ((struct vp_stage_data *)(stage->privatePtr))


/**
 * This function executes vertex programs
 */

static GLboolean run_vp( GLcontext *ctx, struct gl_pipeline_stage *stage )
{
   TNLcontext *tnl = TNL_CONTEXT(ctx);
   struct vp_stage_data *store = VP_STAGE_DATA(stage);
   struct vertex_buffer *VB = &tnl->vb;
   struct vp_machine *machine = &(ctx->VertexProgram.Machine);
   struct vp_program *program = ctx->VertexProgram.Current;
   GLuint i;

   _mesa_init_tracked_matrices(ctx); /* load registers with matrices */
   _mesa_init_vp_registers(ctx);     /* init temp and result regs */

   for (i = 0; i < VB->Count; i++) {
      GLuint attr;

#if 0
      printf("Input  %d: %f, %f, %f, %f\n", i,
             VB->AttribPtr[0]->data[i][0],
             VB->AttribPtr[0]->data[i][1],
             VB->AttribPtr[0]->data[i][2],
             VB->AttribPtr[0]->data[i][3]);
      printf("   color: %f, %f, %f, %f\n",
             VB->AttribPtr[3]->data[i][0],
             VB->AttribPtr[3]->data[i][1],
             VB->AttribPtr[3]->data[i][2],
             VB->AttribPtr[3]->data[i][3]);
      printf("  normal: %f, %f, %f, %f\n",
             VB->AttribPtr[2]->data[i][0],
             VB->AttribPtr[2]->data[i][1],
             VB->AttribPtr[2]->data[i][2],
             VB->AttribPtr[2]->data[i][3]);
#endif

      /* load the input attribute registers */
      if (VB->Flag) {
         /* the traditional glBegin/glVertex/glEnd case */
         for (attr = 0; attr < VERT_ATTRIB_MAX; attr++) {
            if (attr == 0 || (VB->Flag[i] & (1 << attr))) {
               COPY_4V(machine->Registers[VP_INPUT_REG_START + attr],
                       VB->AttribPtr[attr]->data[i]);
            }
         }
      }
      else {
         /* the vertex array case */
         for (attr = 0; attr < VERT_ATTRIB_MAX; attr++) {
            if (program->InputsRead & (1 << attr)) {
               const GLubyte *ptr = (const GLubyte*) VB->AttribPtr[attr]->data;
               const GLuint stride = VB->AttribPtr[attr]->stride;
               const GLfloat *data = (GLfloat *) (ptr + stride * i);
               COPY_4V(machine->Registers[VP_INPUT_REG_START + attr], data);
               /*ASSERT(VB->AttribPtr[attr]->size == 4);*/
               ASSERT(stride == 4 * sizeof(GLfloat) || stride == 0);
            }
         }
      }

      /* execute the program */
      ASSERT(program);
      _mesa_exec_program(ctx, program);

#if 0
      printf("Output %d: %f, %f, %f, %f\n", i,
             machine->Registers[VP_OUTPUT_REG_START + 0][0],
             machine->Registers[VP_OUTPUT_REG_START + 0][1],
             machine->Registers[VP_OUTPUT_REG_START + 0][2],
             machine->Registers[VP_OUTPUT_REG_START + 0][3]);
      printf("   color: %f, %f, %f, %f\n",
             machine->Registers[VP_OUTPUT_REG_START +_1][0],
             machine->Registers[VP_OUTPUT_REG_START + 1][1],
             machine->Registers[VP_OUTPUT_REG_START + 1][2],
             machine->Registers[VP_OUTPUT_REG_START + 1][3]);
      printf("PointSize[%d]: %g\n", i,
             machine->Registers[VP_OUTPUT_REG_START + VERT_RESULT_PSIZ][0]);
#endif

      /* Fixup fog an point size results if needed */
      if (ctx->Fog.Enabled &&
          (program->OutputsWritten & (1 << VERT_RESULT_FOGC)) == 0) {
         machine->Registers[VP_OUTPUT_REG_START + VERT_RESULT_FOGC][0] = 1.0;
      }

      if (ctx->VertexProgram.PointSizeEnabled &&
          (program->OutputsWritten & (1 << VERT_RESULT_PSIZ)) == 0) {
         machine->Registers[VP_OUTPUT_REG_START + VERT_RESULT_PSIZ][0]
            = ctx->Point.Size;
      }

      /* copy the output registers into the VB->attribs arrays */
      /* XXX (optimize) could use a conditional and smaller loop limit here */
      for (attr = 0; attr < 15; attr++) {
         COPY_4V( store->attribs[attr].data[i],
                  machine->Registers[VP_OUTPUT_REG_START + attr] );
      }
   }

   /* Setup the VB pointers so that the next pipeline stages get
    * their data from the right place (the program output arrays).
    */

   VB->ClipPtr = &store->attribs[VERT_RESULT_HPOS];
   VB->ClipPtr->size = 4;
   VB->ClipPtr->count = VB->Count;
   VB->ColorPtr[0] = &store->color0[0];
   VB->ColorPtr[1] = &store->color0[1];
   VB->SecondaryColorPtr[0] = &store->color1[0];
   VB->SecondaryColorPtr[1] = &store->color1[1];
   VB->FogCoordPtr = &store->attribs[VERT_RESULT_FOGC];
   VB->PointSizePtr = &store->attribs[VERT_RESULT_PSIZ];
   for (i = 0; i < ctx->Const.MaxTextureUnits; i++)
      VB->TexCoordPtr[i] = &store->attribs[VERT_RESULT_TEX0 + i];

   /* Cliptest and perspective divide.  Clip functions must clear
    * the clipmask.
    */

   store->ormask = 0;
   store->andmask = CLIP_ALL_BITS;

   if (tnl->NeedNdcCoords) {
      VB->NdcPtr =
         _mesa_clip_tab[VB->ClipPtr->size]( VB->ClipPtr,
                                            &store->ndcCoords,
                                            store->clipmask,
                                            &store->ormask,
                                            &store->andmask );
   }
   else {
      VB->NdcPtr = 0;
      _mesa_clip_np_tab[VB->ClipPtr->size]( VB->ClipPtr,
                                            0,
                                            store->clipmask,
                                            &store->ormask,
                                            &store->andmask );
   }

   if (store->andmask)  /* All vertices are outside the frustum */
      return GL_FALSE;


   /* This is where we'd do clip testing against the user-defined
    * clipping planes, but they're not supported by vertex programs.
    */


   VB->ClipOrMask = store->ormask;
   VB->ClipMask = store->clipmask;

   /* XXXX what's this?
   if (VB->ClipPtr == VB->ObjPtr && (VB->importable_data & VERT_BIT_POS))
      VB->importable_data |= VERT_BIT_CLIP;
   */


   return GL_TRUE;
}


/**
 * This function validates stuff.
 */

static GLboolean run_validate_program( GLcontext *ctx,
                                        struct gl_pipeline_stage *stage )
{
#if 000
   /* XXX do we need any validation for vertex programs? */
   GLuint ind = 0;
   light_func *tab;

   if (ctx->Visual.rgbMode) {
      if (ctx->Light._NeedVertices) {
         if (ctx->Light.Model.ColorControl == GL_SEPARATE_SPECULAR_COLOR)
            tab = _tnl_light_spec_tab;
         else
            tab = _tnl_light_tab;
      }
      else {
         if (ctx->Light.EnabledList.next == ctx->Light.EnabledList.prev)
            tab = _tnl_light_fast_single_tab;
         else
            tab = _tnl_light_fast_tab;
      }
   }
   else
      tab = _tnl_light_ci_tab;

   if (ctx->Light.ColorMaterialEnabled)
      ind |= LIGHT_COLORMATERIAL;

   if (ctx->Light.Model.TwoSide)
      ind |= LIGHT_TWOSIDE;

   VP_STAGE_DATA(stage)->light_func_tab = &tab[ind];

   /* This and the above should only be done on _NEW_LIGHT:
    */

   _mesa_validate_all_lighting_tables( ctx );
#endif

   /* Now run the stage...
    */

   stage->run = run_vp;
   return stage->run( ctx, stage );
}


/**
 * Initialize a gl_client_array to point into a GLvector4f color vector.
 */

static void init_color_array( struct gl_client_array *a, GLvector4f *vec )
{
   a->Ptr = vec->data;
   a->Size = 4;
   a->Type = GL_FLOAT;
   a->Stride = 0;
   a->StrideB = sizeof(GLfloat) * 4;
   a->Enabled = 0;
   a->Flags = 0;
}


/**
 * Called the first time stage->run is called.  In effect, don't
 * allocate data until the first time the stage is run.
 */

static GLboolean run_init_vp( GLcontext *ctx,
                              struct gl_pipeline_stage *stage )
{
   TNLcontext *tnl = TNL_CONTEXT(ctx);
   struct vertex_buffer *VB = &(tnl->vb);
   struct vp_stage_data *store;
   const GLuint size = VB->Size;
   GLuint i;

   stage->privatePtr = MALLOC(sizeof(*store));
   store = VP_STAGE_DATA(stage);
   if (!store)
      return GL_FALSE;

   /* Allocate arrays of vertex output values */
   for (i = 0; i < 15; i++)
      _mesa_vector4f_alloc( &store->attribs[i], 0, size, 32 );

   /* Make the color0[] and color1[] arrays point into the attribs[] arrays */
   init_color_array( &store->color0[0], &store->attribs[VERT_RESULT_COL0] );
   init_color_array( &store->color0[1], &store->attribs[VERT_RESULT_COL1] );
   init_color_array( &store->color1[0], &store->attribs[VERT_RESULT_BFC0] );
   init_color_array( &store->color1[1], &store->attribs[VERT_RESULT_BFC1] );

   /* a few other misc allocations */
   _mesa_vector4f_alloc( &store->ndcCoords, 0, size, 32 );
   store->clipmask = (GLubyte *) ALIGN_MALLOC(sizeof(GLubyte)*size, 32 );

   /* Now validate the stage derived data...
    */

   stage->run = run_validate_program;
   return stage->run( ctx, stage );
}



/**
 * Check if vertex program mode is enabled.
 * If so, configure the pipeline stage's type, inputs, and outputs.
 */

static void check_vp( GLcontext *ctx, struct gl_pipeline_stage *stage )
{
   stage->active = ctx->VertexProgram.Enabled;

   if (stage->active) {
      /* I believe this is right - Keith?
       * Set stage->inputs equal to the bitmask of vertex attributes
       * which the program needs for inputs.
       */


      stage->inputs = ctx->VertexProgram.Current->InputsRead;

#if 000
      if (stage->privatePtr)
         stage->run = run_validate_program;
      stage->inputs = VERT_BIT_NORMAL|VERT_BIT_MATERIAL;
      if (ctx->Light._NeedVertices)
         stage->inputs |= VERT_BIT_EYE; /* effectively, even when lighting in obj */
      if (ctx->Light.ColorMaterialEnabled)
         stage->inputs |= VERT_BIT_COLOR0;

      stage->outputs = VERT_BIT_COLOR0;
      if (ctx->Light.Model.ColorControl == GL_SEPARATE_SPECULAR_COLOR)
         stage->outputs |= VERT_BIT_COLOR1;
#endif
   }
}


/**
 * Destructor for this pipeline stage.
 */

static void dtr( struct gl_pipeline_stage *stage )
{
   struct vp_stage_data *store = VP_STAGE_DATA(stage);

   if (store) {
      GLuint i;

      /* free the vertex program result arrays */
      for (i = 0; i < 15; i++)
         _mesa_vector4f_free( &store->attribs[i] );

      /* free misc arrays */
      _mesa_vector4f_free( &store->ndcCoords );
      ALIGN_FREE( store->clipmask );

      FREE( store );
      stage->privatePtr = 0;
   }
}

/**
 * Public description of this pipeline stage.
 */

const struct gl_pipeline_stage _tnl_vertex_program_stage =
{
   "vertex-program",
   _NEW_ALL,    /*XXX FIX */    /* recheck */
   _NEW_ALL,    /*XXX FIX */    /* recalc -- modelview dependency
                                 * otherwise not captured by inputs
                                 * (which may be VERT_BIT_POS) */

   GL_FALSE,                    /* active */
   /*0*/ VERT_BIT_POS,                          /* inputs  XXX OK? */
   VERT_BIT_CLIP | VERT_BIT_COLOR0,                     /* outputs XXX OK? */
   0,                           /* changed_inputs */
   NULL,                        /* private_data */
   dtr,                         /* destroy */
   check_vp,                    /* check */
   run_init_vp                  /* run -- initially set to ctr */
};