Subversion Repositories shark

Rev

Rev 775 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
 *
 *  Licensed under the terms of the GNU GPL License version 2.
 *
 *  Library for common functions for Intel SpeedStep v.1 and v.2 support
 *
 *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
 */


#include <linuxcomp.h>

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/slab.h>

#include <asm/msr.h>
#include "speedstep-lib.h"


/* DEBUG
 *   Define it if you want verbose debug output, e.g. for bug reporting
 */

#define SPEEDSTEP_DEBUG

#ifdef SPEEDSTEP_DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0)
#endif

/*********************************************************************
 *                   GET PROCESSOR CORE SPEED IN KHZ                 *
 *********************************************************************/


static unsigned int pentium3_get_frequency (unsigned int processor)
{
        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
        struct {
                unsigned int ratio;     /* Frequency Multiplier (x10) */
                u8 bitmap;              /* power on configuration bits
                                           [27, 25:22] (in MSR 0x2a) */

        } msr_decode_mult [] = {
                { 30, 0x01 },
                { 35, 0x05 },
                { 40, 0x02 },
                { 45, 0x06 },
                { 50, 0x00 },
                { 55, 0x04 },
                { 60, 0x0b },
                { 65, 0x0f },
                { 70, 0x09 },
                { 75, 0x0d },
                { 80, 0x0a },
                { 85, 0x26 },
                { 90, 0x20 },
                { 100, 0x2b },
                { 0, 0xff }     /* error or unknown value */
        };

        /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
        struct {
                unsigned int value;     /* Front Side Bus speed in MHz */
                u8 bitmap;              /* power on configuration bits [18: 19]
                                           (in MSR 0x2a) */

        } msr_decode_fsb [] = {
                {  66, 0x0 },
                { 100, 0x2 },
                { 133, 0x1 },
                {   0, 0xff}
        };

        u32     msr_lo, msr_tmp;
        int     i = 0, j = 0;

        /* read MSR 0x2a - we only need the low 32 bits */
        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
        dprintk(KERN_DEBUG "speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
        msr_tmp = msr_lo;

        /* decode the FSB */
        msr_tmp &= 0x00c0000;
        msr_tmp >>= 18;
        while (msr_tmp != msr_decode_fsb[i].bitmap) {
                if (msr_decode_fsb[i].bitmap == 0xff)
                        return 0;
                i++;
        }

        /* decode the multiplier */
        if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY)
                msr_lo &= 0x03c00000;
        else
                msr_lo &= 0x0bc00000;
        msr_lo >>= 22;
        while (msr_lo != msr_decode_mult[j].bitmap) {
                if (msr_decode_mult[j].bitmap == 0xff)
                        return 0;
                j++;
        }

        return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
}


static unsigned int pentium4_get_frequency(void)
{
        u32 msr_lo, msr_hi;

        rdmsr(0x2c, msr_lo, msr_hi);

        dprintk(KERN_DEBUG "speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);

        msr_lo >>= 24;
        return (msr_lo * 100000);
}

 
unsigned int speedstep_get_processor_frequency(unsigned int processor)
{
        switch (processor) {
        case SPEEDSTEP_PROCESSOR_P4M:
                return pentium4_get_frequency();
        case SPEEDSTEP_PROCESSOR_PIII_T:
        case SPEEDSTEP_PROCESSOR_PIII_C:
        case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
                return pentium3_get_frequency(processor);
        default:
                return 0;
        };
        return 0;
}
EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);


/*********************************************************************
 *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
 *********************************************************************/


unsigned int speedstep_detect_processor (void)
{
        struct cpuinfo_x86 *c = cpu_data;
        u32                     ebx, msr_lo, msr_hi;

        if ((c->x86_vendor != X86_VENDOR_INTEL) ||
            ((c->x86 != 6) && (c->x86 != 0xF)))
                return 0;

        if (c->x86 == 0xF) {
                /* Intel Mobile Pentium 4-M
                 * or Intel Mobile Pentium 4 with 533 MHz FSB */

                if (c->x86_model != 2)
                        return 0;

                if ((c->x86_mask != 4) && /* B-stepping [M-P4-M] */
                        (c->x86_mask != 7) && /* C-stepping [M-P4-M] */
                        (c->x86_mask != 9))   /* D-stepping [M-P4-M or M-P4/533] */
                        return 0;

                ebx = cpuid_ebx(0x00000001);
                ebx &= 0x000000FF;
                if ((ebx != 0x0e) && (ebx != 0x0f))
                        return 0;

                return SPEEDSTEP_PROCESSOR_P4M;
        }

        switch (c->x86_model) {
        case 0x0B: /* Intel PIII [Tualatin] */
                /* cpuid_ebx(1) is 0x04 for desktop PIII,
                                   0x06 for mobile PIII-M */

                ebx = cpuid_ebx(0x00000001);

                ebx &= 0x000000FF;
                if (ebx != 0x06)
                        return 0;

                /* So far all PIII-M processors support SpeedStep. See
                 * Intel's 24540640.pdf of June 2003
                 */


                return SPEEDSTEP_PROCESSOR_PIII_T;

        case 0x08: /* Intel PIII [Coppermine] */

                /* all mobile PIII Coppermines have FSB 100 MHz
                 * ==> sort out a few desktop PIIIs. */

                rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
                dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
                msr_lo &= 0x00c0000;
                if (msr_lo != 0x0080000)
                        return 0;

                /*
                 * If the processor is a mobile version,
                 * platform ID has bit 50 set
                 * it has SpeedStep technology if either
                 * bit 56 or 57 is set
                 */

                rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
                dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
                if ((msr_hi & (1<<18)) && (msr_hi & (3<<24))) {
                        if (c->x86_mask == 0x01)
                                return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
                        else
                                return SPEEDSTEP_PROCESSOR_PIII_C;
                }

        default:
                return 0;
        }
}
EXPORT_SYMBOL_GPL(speedstep_detect_processor);


/*********************************************************************
 *                     DETECT SPEEDSTEP SPEEDS                       *
 *********************************************************************/


unsigned int speedstep_get_freqs(unsigned int processor,
                                  unsigned int *low_speed,
                                  unsigned int *high_speed,
                                  void (*set_state) (unsigned int state,
                                                     unsigned int notify)
                                 )
{
        unsigned int prev_speed;
        unsigned int ret = 0;
        unsigned long flags;

        if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
                return -EINVAL;

        /* get current speed */
        prev_speed = speedstep_get_processor_frequency(processor);
        if (!prev_speed)
                return -EIO;
       
        local_irq_save(flags);

        /* switch to low state */
        set_state(SPEEDSTEP_LOW, 0);
        *low_speed = speedstep_get_processor_frequency(processor);
        if (!*low_speed) {
                ret = -EIO;
                goto out;
        }

        /* switch to high state */
        set_state(SPEEDSTEP_HIGH, 0);
        *high_speed = speedstep_get_processor_frequency(processor);
        if (!*high_speed) {
                ret = -EIO;
                goto out;
        }

        if (*low_speed == *high_speed) {
                ret = -ENODEV;
                goto out;
        }

        /* switch to previous state, if necessary */
        if (*high_speed != prev_speed)
                set_state(SPEEDSTEP_LOW, 0);

 out:
        local_irq_restore(flags);
        return (ret);
}
EXPORT_SYMBOL_GPL(speedstep_get_freqs);

MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
MODULE_LICENSE ("GPL");