Subversion Repositories shark

Rev

Rev 422 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * Private header file for the (dumb) serial driver
 *
 * Copyright (C) 1997 by Theodore Ts'o.
 *
 * Redistribution of this file is permitted under the terms of the GNU
 * Public License (GPL)
 */


#ifndef _LINUX_SERIALP_H
#define _LINUX_SERIALP_H

/*
 * This is our internal structure for each serial port's state.
 *
 * Many fields are paralleled by the structure used by the serial_struct
 * structure.
 *
 * For definitions of the flags field, see tty.h
 */


#include <linux/version.h>
#include <linux/config.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
#include <linux/wait.h>
#if (LINUX_VERSION_CODE < 0x020300)
/* Unfortunate, but Linux 2.2 needs async_icount defined here and
 * it got moved in 2.3 */

#include <linux/serial.h>
#endif

struct serial_state {
        int     magic;
        int     baud_base;
        unsigned long   port;
        int     irq;
        int     flags;
        int     hub6;
        int     type;
        int     line;
        int     revision;       /* Chip revision (950) */
        int     xmit_fifo_size;
        int     custom_divisor;
        int     count;
        u8      *iomem_base;
        u16     iomem_reg_shift;
        unsigned short  close_delay;
        unsigned short  closing_wait; /* time to wait before closing */
        struct async_icount     icount;
        int     io_type;
        struct async_struct *info;
        struct pci_dev  *dev;
};

struct async_struct {
        int                     magic;
        unsigned long           port;
        int                     hub6;
        int                     flags;
        int                     xmit_fifo_size;
        struct serial_state     *state;
        struct tty_struct       *tty;
        int                     read_status_mask;
        int                     ignore_status_mask;
        int                     timeout;
        int                     quot;
        int                     x_char; /* xon/xoff character */
        int                     close_delay;
        unsigned short          closing_wait;
        unsigned short          closing_wait2; /* obsolete */
        int                     IER;    /* Interrupt Enable Register */
        int                     MCR;    /* Modem control register */
        int                     LCR;    /* Line control register */
        int                     ACR;     /* 16950 Additional Control Reg. */
        unsigned long           event;
        unsigned long           last_active;
        int                     line;
        int                     blocked_open; /* # of blocked opens */
        struct circ_buf         xmit;
        spinlock_t              xmit_lock;
        u8                      *iomem_base;
        u16                     iomem_reg_shift;
        int                     io_type;
        struct work_struct                      work;
        struct tasklet_struct   tlet;
#ifdef DECLARE_WAITQUEUE
        wait_queue_head_t       open_wait;
        wait_queue_head_t       close_wait;
        wait_queue_head_t       delta_msr_wait;
#else  
        struct wait_queue       *open_wait;
        struct wait_queue       *close_wait;
        struct wait_queue       *delta_msr_wait;
#endif 
        struct async_struct     *next_port; /* For the linked list */
        struct async_struct     *prev_port;
};

#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))

#define SERIAL_MAGIC 0x5301
#define SSTATE_MAGIC 0x5302

/*
 * Events are used to schedule things to happen at timer-interrupt
 * time, instead of at rs interrupt time.
 */

#define RS_EVENT_WRITE_WAKEUP   0

/*
 * Multiport serial configuration structure --- internal structure
 */

struct rs_multiport_struct {
        int             port1;
        unsigned char   mask1, match1;
        int             port2;
        unsigned char   mask2, match2;
        int             port3;
        unsigned char   mask3, match3;
        int             port4;
        unsigned char   mask4, match4;
        int             port_monitor;
};

#if defined(__alpha__) && !defined(CONFIG_PCI)
/*
 * Digital did something really horribly wrong with the OUT1 and OUT2
 * lines on at least some ALPHA's.  The failure mode is that if either
 * is cleared, the machine locks up with endless interrupts.
 *
 * This is still used by arch/mips/au1000/common/serial.c for some weird
 * reason (mips != alpha!)
 */

#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
#else
#define ALPHA_KLUDGE_MCR 0
#endif

/*
 * Definitions for PCI support.
 */

#define SPCI_FL_BASE_MASK       0x0007
#define SPCI_FL_BASE0   0x0000
#define SPCI_FL_BASE1   0x0001
#define SPCI_FL_BASE2   0x0002
#define SPCI_FL_BASE3   0x0003
#define SPCI_FL_BASE4   0x0004
#define SPCI_FL_GET_BASE(x)     (x & SPCI_FL_BASE_MASK)

#define SPCI_FL_IRQ_MASK       (0x0007 << 4)
#define SPCI_FL_IRQBASE0       (0x0000 << 4)
#define SPCI_FL_IRQBASE1       (0x0001 << 4)
#define SPCI_FL_IRQBASE2       (0x0002 << 4)
#define SPCI_FL_IRQBASE3       (0x0003 << 4)
#define SPCI_FL_IRQBASE4       (0x0004 << 4)
#define SPCI_FL_GET_IRQBASE(x)        ((x & SPCI_FL_IRQ_MASK) >> 4)

/* Use successive BARs (PCI base address registers),
   else use offset into some specified BAR */

#define SPCI_FL_BASE_TABLE      0x0100

/* Use successive entries in the irq resource table */
#define SPCI_FL_IRQ_TABLE       0x0200

/* Use the irq resource table instead of dev->irq */
#define SPCI_FL_IRQRESOURCE     0x0400

/* Use the Base address register size to cap number of ports */
#define SPCI_FL_REGION_SZ_CAP   0x0800

/* Do not use irq sharing for this device */
#define SPCI_FL_NO_SHIRQ        0x1000

/* This is a PNP device */
#define SPCI_FL_ISPNP           0x2000

#define SPCI_FL_PNPDEFAULT      (SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)

#endif /* _LINUX_SERIAL_H */