Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * $Id: sermouse.c,v 1.1 2004-03-08 18:47:40 giacomo Exp $
 *
 *  Copyright (c) 1999-2001 Vojtech Pavlik
 */


/*
 *  Serial mouse driver for Linux
 */


/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 * Should you need to contact me, the author, you can do so either by
 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
 */


#include <linuxcomp.h>

#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/config.h>
#include <linux/serio.h>
#include <linux/init.h>

MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Serial mouse driver");
MODULE_LICENSE("GPL");

static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
                                        "Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
                                        "Logitech MZ++ Mouse"};

struct sermouse {
        struct input_dev dev;
        signed char buf[8];
        unsigned char count;
        unsigned char type;
        unsigned long last;
        char phys[32];
};

/*
 * sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
 * applies some prediction to the data, resulting in 96 updates per
 * second, which is as good as a PS/2 or USB mouse.
 */


static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
        struct input_dev *dev = &sermouse->dev;
        signed char *buf = sermouse->buf;

        input_regs(dev, regs);

        switch (sermouse->count) {

                case 0:
                        if ((data & 0xf8) != 0x80) return;
                        input_report_key(dev, BTN_LEFT,   !(data & 4));
                        input_report_key(dev, BTN_RIGHT,  !(data & 1));
                        input_report_key(dev, BTN_MIDDLE, !(data & 2));
                        break;

                case 1:
                case 3:
                        input_report_rel(dev, REL_X, data / 2);
                        input_report_rel(dev, REL_Y, -buf[1]);
                        buf[0] = data - data / 2;
                        break;

                case 2:
                case 4:
                        input_report_rel(dev, REL_X, buf[0]);
                        input_report_rel(dev, REL_Y, buf[1] - data);
                        buf[1] = data / 2;
                        break;
        }

        input_sync(dev);

        if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
                sermouse->count = 0;
}

/*
 * sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
 * generates events. With prediction it gets 80 updates/sec, assuming
 * standard 3-byte packets and 1200 bps.
 */


static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
        struct input_dev *dev = &sermouse->dev;
        signed char *buf = sermouse->buf;

        if (data & 0x40) sermouse->count = 0;

        input_regs(dev, regs);

        switch (sermouse->count) {

                case 0:
                        buf[1] = data;
                        input_report_key(dev, BTN_LEFT,   (data >> 5) & 1);
                        input_report_key(dev, BTN_RIGHT,  (data >> 4) & 1);
                        break;

                case 1:
                        buf[2] = data;
                        data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
                        input_report_rel(dev, REL_X, data / 2);
                        input_report_rel(dev, REL_Y, buf[4]);
                        buf[3] = data - data / 2;
                        break;

                case 2:
                        /* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
                        if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
                                input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
                        buf[0] = buf[1];

                        data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
                        input_report_rel(dev, REL_X, buf[3]);
                        input_report_rel(dev, REL_Y, data - buf[4]);
                        buf[4] = data / 2;
                        break;

                case 3:

                        switch (sermouse->type) {
                       
                                case SERIO_MS:
                                         sermouse->type = SERIO_MP;

                                case SERIO_MP:
                                        if ((data >> 2) & 3) break;     /* M++ Wireless Extension packet. */
                                        input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
                                        input_report_key(dev, BTN_SIDE,   (data >> 4) & 1);
                                        break;

                                case SERIO_MZP:
                                case SERIO_MZPP:
                                        input_report_key(dev, BTN_SIDE,   (data >> 5) & 1);

                                case SERIO_MZ:
                                        input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
                                        input_report_rel(dev, REL_WHEEL,  (data & 8) - (data & 7));
                                        break;
                        }
                                       
                        break;

                case 4:
                case 6: /* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
                        buf[1] = (data >> 2) & 0x0f;
                        break;

                case 5:
                case 7: /* Ignore anything besides MZ++ */
                        if (sermouse->type != SERIO_MZPP) break;

                        switch (buf[1]) {

                                case 1: /* Extra mouse info */

                                        input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
                                        input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
                                        input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));

                                        break;

                                default: /* We don't decode anything else yet. */

                                        printk(KERN_WARNING
                                                "sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
                                        break;
                        }

                        break;
        }

        input_sync(dev);

        sermouse->count++;
}

/*
 * sermouse_interrupt() handles incoming characters, either gathering them into
 * packets or passing them to the command routine as command output.
 */


static irqreturn_t sermouse_interrupt(struct serio *serio,
                unsigned char data, unsigned int flags, struct pt_regs *regs)
{
        struct sermouse *sermouse = serio->private;

        if (time_after(jiffies26, sermouse->last + HZ/10)) sermouse->count = 0;
        sermouse->last = jiffies26;

        if (sermouse->type > SERIO_SUN)
                sermouse_process_ms(sermouse, data, regs);
        else
                sermouse_process_msc(sermouse, data, regs);
        return IRQ_HANDLED;
}

/*
 * sermouse_disconnect() cleans up after we don't want talk
 * to the mouse anymore.
 */


static void sermouse_disconnect(struct serio *serio)
{
        struct sermouse *sermouse = serio->private;
        input_unregister_device(&sermouse->dev);
        serio_close(serio);
        kfree(sermouse);
}

/*
 * sermouse_connect() is a callback form the serio module when
 * an unhandled serio port is found.
 */


static void sermouse_connect(struct serio *serio, struct serio_dev *dev)
{
        struct sermouse *sermouse;
        unsigned char c;
       
        if ((serio->type & SERIO_TYPE) != SERIO_RS232)
                return;

        if (!(serio->type & SERIO_PROTO) || ((serio->type & SERIO_PROTO) > SERIO_MZPP))
                return;

        if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
                return;

        memset(sermouse, 0, sizeof(struct sermouse));

        init_input_dev(&sermouse->dev);
        sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
        sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
        sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
        sermouse->dev.private = sermouse;

        serio->private = sermouse;

        sermouse->type = serio->type & SERIO_PROTO;
        c = (serio->type & SERIO_EXTRA) >> 16;

        if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
        if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
        if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
        if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
        if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);

        sprintf26(sermouse->phys, "%s/input0", serio->phys);

        sermouse->dev.name = sermouse_protocols[sermouse->type];
        sermouse->dev.phys = sermouse->phys;
        sermouse->dev.id.bustype = BUS_RS232;
        sermouse->dev.id.vendor = sermouse->type;
        sermouse->dev.id.product = c;
        sermouse->dev.id.version = 0x0100;

        if (serio_open(serio, dev)) {
                kfree(sermouse);
                return;
        }

        input_register_device(&sermouse->dev);
       
        printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);
}

static struct serio_dev sermouse_dev = {
        .interrupt =    sermouse_interrupt,
        .connect =      sermouse_connect,
        .disconnect =   sermouse_disconnect
};

int __init sermouse_init(void)
{
        serio_register_device(&sermouse_dev);
        return 0;
}

void __exit sermouse_exit(void)
{
        serio_unregister_device(&sermouse_dev);
}

module_init(sermouse_init);
module_exit(sermouse_exit);