Subversion Repositories shark

Rev

Rev 422 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/* atmdev.h - ATM device driver declarations and various related items */
 
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
 

#ifndef LINUX_ATMDEV_H
#define LINUX_ATMDEV_H


#include <linux/config.h>
#include <linux/atmapi.h>
#include <linux/atm.h>
#include <linux/atmioc.h>


#define ESI_LEN         6

#define ATM_OC3_PCR     (155520000/270*260/8/53)
                        /* OC3 link rate:  155520000 bps
                           SONET overhead: /270*260 (9 section, 1 path)
                           bits per cell:  /8/53
                           max cell rate:  353207.547 cells/sec */

#define ATM_25_PCR      ((25600000/8-8000)/54)
                        /* 25 Mbps ATM cell rate (59111) */
#define ATM_OC12_PCR    (622080000/1080*1040/8/53)
                        /* OC12 link rate: 622080000 bps
                           SONET overhead: /1080*1040
                           bits per cell:  /8/53
                           max cell rate:  1412830.188 cells/sec */

#define ATM_DS3_PCR     (8000*12)
                        /* DS3: 12 cells in a 125 usec time slot */

#define atm_sk(__sk) ((struct atm_vcc *)(__sk)->sk_protinfo)
#define ATM_SD(s)       (atm_sk((s)->sk))


#define __AAL_STAT_ITEMS \
    __HANDLE_ITEM(tx);                  /* TX okay */ \
    __HANDLE_ITEM(tx_err);              /* TX errors */ \
    __HANDLE_ITEM(rx);                  /* RX okay */ \
    __HANDLE_ITEM(rx_err);              /* RX errors */ \
    __HANDLE_ITEM(rx_drop);             /* RX out of memory */


struct atm_aal_stats {
#define __HANDLE_ITEM(i) int i
        __AAL_STAT_ITEMS
#undef __HANDLE_ITEM
};


struct atm_dev_stats {
        struct atm_aal_stats aal0;
        struct atm_aal_stats aal34;
        struct atm_aal_stats aal5;
} __ATM_API_ALIGN;


#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
                                        /* get link rate */
#define ATM_GETNAMES    _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
                                        /* get interface names (numbers) */
#define ATM_GETTYPE     _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
                                        /* get interface type name */
#define ATM_GETESI      _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
                                        /* get interface ESI */
#define ATM_GETADDR     _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
                                        /* get itf's local ATM addr. list */
#define ATM_RSTADDR     _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
                                        /* reset itf's ATM address list */
#define ATM_ADDADDR     _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
                                        /* add a local ATM address */
#define ATM_DELADDR     _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
                                        /* remove a local ATM address */
#define ATM_GETCIRANGE  _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
                                        /* get connection identifier range */
#define ATM_SETCIRANGE  _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
                                        /* set connection identifier range */
#define ATM_SETESI      _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
                                        /* set interface ESI */
#define ATM_SETESIF     _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
                                        /* force interface ESI */
#define ATM_GETSTAT     _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
                                        /* get AAL layer statistics */
#define ATM_GETSTATZ    _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
                                        /* get AAL layer statistics and zero */
#define ATM_GETLOOP     _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
                                        /* get loopback mode */
#define ATM_SETLOOP     _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
                                        /* set loopback mode */
#define ATM_QUERYLOOP   _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
                                        /* query supported loopback modes */
#define ATM_SETSC       _IOW('a',ATMIOC_SPECIAL+1,int)
                                        /* enable or disable single-copy */
#define ATM_SETBACKEND  _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
                                        /* set backend handler */
#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
                                        /* use backend to make new if */

/*
 * These are backend handkers that can be set via the ATM_SETBACKEND call
 * above.  In the future we may support dynamic loading of these - for now,
 * they're just being used to share the ATMIOC_BACKEND ioctls
 */

#define ATM_BACKEND_RAW         0      
#define ATM_BACKEND_PPP         1       /* PPPoATM - RFC2364 */
#define ATM_BACKEND_BR2684      2       /* Bridged RFC1483/2684 */

/* for ATM_GETTYPE */
#define ATM_ITFTYP_LEN  8       /* maximum length of interface type name */

/*
 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
 */


/* Point of loopback                            CPU-->SAR-->PHY-->line--> ... */
#define __ATM_LM_NONE   0       /* no loop back     ^     ^     ^      ^      */
#define __ATM_LM_AAL    1       /* loop back PDUs --'     |     |      |      */
#define __ATM_LM_ATM    2       /* loop back ATM cells ---'     |      |      */
/* RESERVED             4       loop back on PHY side  ---'                   */
#define __ATM_LM_PHY    8       /* loop back bits (digital) ----'      |      */
#define __ATM_LM_ANALOG 16      /* loop back the analog signal --------'      */

/* Direction of loopback */
#define __ATM_LM_MKLOC(n)       ((n))       /* Local (i.e. loop TX to RX) */
#define __ATM_LM_MKRMT(n)       ((n) << 8)  /* Remote (i.e. loop RX to TX) */

#define __ATM_LM_XTLOC(n)       ((n) & 0xff)
#define __ATM_LM_XTRMT(n)       (((n) >> 8) & 0xff)

#define ATM_LM_NONE     0       /* no loopback */

#define ATM_LM_LOC_AAL  __ATM_LM_MKLOC(__ATM_LM_AAL)
#define ATM_LM_LOC_ATM  __ATM_LM_MKLOC(__ATM_LM_ATM)
#define ATM_LM_LOC_PHY  __ATM_LM_MKLOC(__ATM_LM_PHY)
#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)

#define ATM_LM_RMT_AAL  __ATM_LM_MKRMT(__ATM_LM_AAL)
#define ATM_LM_RMT_ATM  __ATM_LM_MKRMT(__ATM_LM_ATM)
#define ATM_LM_RMT_PHY  __ATM_LM_MKRMT(__ATM_LM_PHY)
#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)

/*
 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
 */



struct atm_iobuf {
        int length;
        void *buffer;
};

/* for ATM_GETCIRANGE / ATM_SETCIRANGE */

#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
 
struct atm_cirange {
        char    vpi_bits;               /* 1..8, ATM_CI_MAX (-1) for maximum */
        char    vci_bits;               /* 1..16, ATM_CI_MAX (-1) for maximum */
};

/* for ATM_SETSC; actually taken from the ATM_VF number space */

#define ATM_SC_RX       1024            /* enable RX single-copy */
#define ATM_SC_TX       2048            /* enable TX single-copy */

#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
                                  anyway */

/* MF: change_qos (Modify) flags */

#define ATM_MF_IMMED     1      /* Block until change is effective */
#define ATM_MF_INC_RSV   2      /* Change reservation on increase */
#define ATM_MF_INC_SHP   4      /* Change shaping on increase */
#define ATM_MF_DEC_RSV   8      /* Change reservation on decrease */
#define ATM_MF_DEC_SHP  16      /* Change shaping on decrease */
#define ATM_MF_BWD      32      /* Set the backward direction parameters */

#define ATM_MF_SET      (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
                          ATM_MF_DEC_SHP | ATM_MF_BWD)


/*
 * ATM_VS_* are used to express VC state in a human-friendly way.
 */


#define ATM_VS_IDLE     0       /* VC is not used */
#define ATM_VS_CONNECTED 1      /* VC is connected */
#define ATM_VS_CLOSING  2       /* VC is closing */
#define ATM_VS_LISTEN   3       /* VC is listening for incoming setups */
#define ATM_VS_INUSE    4       /* VC is in use (registered with atmsigd) */
#define ATM_VS_BOUND    5       /* VC is bound */

#define ATM_VS2TXT_MAP \
    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"


#define ATM_VF2TXT_MAP \
    "ADDR",     "READY",        "PARTIAL",      "REGIS", \
    "RELEASED", "HASQOS",       "LISTEN",       "META", \
    "256",      "512",          "1024",         "2048", \
    "SESSION",  "HASSAP",       "BOUND",        "CLOSE"



#ifndef __KERNEL__
#undef __AAL_STAT_ITEMS
#else

#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
#include <linux/skbuff.h> /* struct sk_buff */
#include <linux/uio.h>
#include <net/sock.h>
#include <asm/atomic.h>

#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>

extern struct proc_dir_entry *atm_proc_root;
#endif


struct k_atm_aal_stats {
#define __HANDLE_ITEM(i) atomic_t i
        __AAL_STAT_ITEMS
#undef __HANDLE_ITEM
};


struct k_atm_dev_stats {
        struct k_atm_aal_stats aal0;
        struct k_atm_aal_stats aal34;
        struct k_atm_aal_stats aal5;
};


enum {
        ATM_VF_ADDR,            /* Address is in use. Set by anybody, cleared
                                   by device driver. */

        ATM_VF_READY,           /* VC is ready to transfer data. Set by device
                                   driver, cleared by anybody. */

        ATM_VF_PARTIAL,         /* resources are bound to PVC (partial PVC
                                   setup), controlled by socket layer */

        ATM_VF_REGIS,           /* registered with demon, controlled by SVC
                                   socket layer */

        ATM_VF_BOUND,           /* local SAP is set, controlled by SVC socket
                                   layer */

        ATM_VF_RELEASED,        /* demon has indicated/requested release,
                                   controlled by SVC socket layer */

        ATM_VF_HASQOS,          /* QOS parameters have been set */
        ATM_VF_LISTEN,          /* socket is used for listening */
        ATM_VF_META,            /* SVC socket isn't used for normal data
                                   traffic and doesn't depend on signaling
                                   to be available */

        ATM_VF_SESSION,         /* VCC is p2mp session control descriptor */
        ATM_VF_HASSAP,          /* SAP has been set */
        ATM_VF_CLOSE,           /* asynchronous close - treat like VF_RELEASED*/
        ATM_VF_WAITING,         /* waiting for reply from sigd */
        ATM_VF_IS_CLIP,         /* in use by CLIP protocol */
};


#define ATM_VF2VS(flags) \
    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)



enum {
        ATM_DF_CLOSE,           /* close device when last VCC is closed */
};


#define ATM_PHY_SIG_LOST    0   /* no carrier/light */
#define ATM_PHY_SIG_UNKNOWN 1   /* carrier/light status is unknown */
#define ATM_PHY_SIG_FOUND   2   /* carrier/light okay */

#define ATM_ATMOPT_CLP  1       /* set CLP bit */

struct atm_vcc {
        unsigned long   flags;          /* VCC flags (ATM_VF_*) */
        short           vpi;            /* VPI and VCI (types must be equal */
                                        /* with sockaddr) */
        int             vci;
        unsigned long   aal_options;    /* AAL layer options */
        unsigned long   atm_options;    /* ATM layer options */
        struct atm_dev  *dev;           /* device back pointer */
        struct atm_qos  qos;            /* QOS */
        struct atm_sap  sap;            /* SAP */
        void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
        void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
        int (*push_oam)(struct atm_vcc *vcc,void *cell);
        int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
        void            *dev_data;      /* per-device data */
        void            *proto_data;    /* per-protocol data */
        struct k_atm_aal_stats *stats;  /* pointer to AAL stats group */
        struct sock     *sk;            /* socket backpointer */
        /* SVC part --- may move later ------------------------------------- */
        short           itf;            /* interface number */
        struct sockaddr_atmsvc local;
        struct sockaddr_atmsvc remote;
        /* Multipoint part ------------------------------------------------- */
        struct atm_vcc  *session;       /* session VCC descriptor */
        /* Other stuff ----------------------------------------------------- */
        void            *user_back;     /* user backlink - not touched by */
                                        /* native ATM stack. Currently used */
                                        /* by CLIP and sch_atm. */
};


struct atm_dev_addr {
        struct sockaddr_atmsvc addr;    /* ATM address */
        struct atm_dev_addr *next;      /* next address */
};

struct atm_dev {
        const struct atmdev_ops *ops;   /* device operations; NULL if unused */
        const struct atmphy_ops *phy;   /* PHY operations, may be undefined */
                                        /* (NULL) */
        const char      *type;          /* device type name */
        int             number;         /* device index */
        void            *dev_data;      /* per-device data */
        void            *phy_data;      /* private PHY date */
        unsigned long   flags;          /* device flags (ATM_DF_*) */
        struct atm_dev_addr *local;     /* local ATM addresses */
        unsigned char   esi[ESI_LEN];   /* ESI ("MAC" addr) */
        struct atm_cirange ci_range;    /* VPI/VCI range */
        struct k_atm_dev_stats stats;   /* statistics */
        char            signal;         /* signal status (ATM_PHY_SIG_*) */
        int             link_rate;      /* link rate (default: OC3) */
        atomic_t        refcnt;         /* reference count */
        spinlock_t      lock;           /* protect internal members */
#ifdef CONFIG_PROC_FS
        struct proc_dir_entry *proc_entry; /* proc entry */
        char *proc_name;                /* proc entry name */
#endif
        struct list_head dev_list;      /* linkage */
};

 
/* OF: send_Oam Flags */

#define ATM_OF_IMMED  1         /* Attempt immediate delivery */
#define ATM_OF_INRATE 2         /* Attempt in-rate delivery */


/*
 * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
 */


struct atmdev_ops { /* only send is required */
        void (*dev_close)(struct atm_dev *dev);
        int (*open)(struct atm_vcc *vcc);
        void (*close)(struct atm_vcc *vcc);
        int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
        int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
            void *optval,int optlen);
        int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
            void *optval,int optlen);
        int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
        int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
        void (*phy_put)(struct atm_dev *dev,unsigned char value,
            unsigned long addr);
        unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
        int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
        int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
        struct module *owner;
};

struct atmphy_ops {
        int (*start)(struct atm_dev *dev);
        int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
        void (*interrupt)(struct atm_dev *dev);
        int (*stop)(struct atm_dev *dev);
};

struct atm_skb_data {
        struct atm_vcc  *vcc;           /* ATM VCC */
        unsigned long   atm_options;    /* ATM layer options */
};

#define VCC_HTABLE_SIZE 32

extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
extern rwlock_t vcc_sklist_lock;

#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))

struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
    int number,unsigned long *flags); /* number == -1: pick first available */
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
void shutdown_atm_dev(struct atm_dev *dev);
void vcc_insert_socket(struct sock *sk);
void vcc_remove_socket(struct sock *sk);


/*
 * This is approximately the algorithm used by alloc_skb.
 *
 */


static inline int atm_guess_pdu2truesize(int pdu_size)
{
        return ((pdu_size+15) & ~15) + sizeof(struct sk_buff);
}


static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
{
        atomic_add(truesize, &vcc->sk->sk_rmem_alloc);
}


static inline void atm_return(struct atm_vcc *vcc,int truesize)
{
        atomic_sub(truesize, &vcc->sk->sk_rmem_alloc);
}


static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
{
        return (size + atomic_read(&vcc->sk->sk_wmem_alloc)) <
               vcc->sk->sk_sndbuf;
}


static inline void atm_dev_hold(struct atm_dev *dev)
{
        atomic_inc(&dev->refcnt);
}


static inline void atm_dev_put(struct atm_dev *dev)
{
        atomic_dec(&dev->refcnt);

        if ((atomic_read(&dev->refcnt) == 1) &&
            test_bit(ATM_DF_CLOSE,&dev->flags))
                shutdown_atm_dev(dev);
}


int atm_charge(struct atm_vcc *vcc,int truesize);
struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
    int gfp_flags);
int atm_pcr_goal(struct atm_trafprm *tp);

void vcc_release_async(struct atm_vcc *vcc, int reply);

struct atm_ioctl {
        struct module *owner;
        /* A module reference is kept if appropriate over this call.
         * Return -ENOIOCTLCMD if you don't handle it. */

        int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
        struct list_head list;
};

/**
 * register_atm_ioctl - register handler for ioctl operations
 *
 * Special (non-device) handlers of ioctl's should
 * register here. If you're a normal device, you should
 * set .ioctl in your atmdev_ops instead.
 */

void register_atm_ioctl(struct atm_ioctl *);

/**
 * deregister_atm_ioctl - remove the ioctl handler
 */

void deregister_atm_ioctl(struct atm_ioctl *);

#endif /* __KERNEL__ */

#endif