Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#ifndef _ULTRASOUND_H_
#define _ULTRASOUND_H_
/*
 *      ultrasound.h - Macros for programming the Gravis Ultrasound
 *                      These macros are extremely device dependent
 *                      and not portable.
 */

/*
 * Copyright (C) by Hannu Savolainen 1993-1997
 *
 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
 * Version 2 (June 1991). See the "COPYING" file distributed with this software
 * for more info.
 */



/*
 *      Private events for Gravis Ultrasound (GUS)
 *
 *      Format:
 *              byte 0          - SEQ_PRIVATE (0xfe)
 *              byte 1          - Synthesizer device number (0-N)
 *              byte 2          - Command (see below)
 *              byte 3          - Voice number (0-31)
 *              bytes 4 and 5   - parameter P1 (unsigned short)
 *              bytes 6 and 7   - parameter P2 (unsigned short)
 *
 *      Commands:
 *              Each command affects one voice defined in byte 3.
 *              Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
 *              _GUS_NUMVOICES  - Sets max. number of concurrent voices (P1=14-31, default 16)
 *              _GUS_VOICESAMPLE- ************ OBSOLETE *************
 *              _GUS_VOICEON    - Starts voice (P1=voice mode)
 *              _GUS_VOICEOFF   - Stops voice (no parameters)
 *              _GUS_VOICEFADE  - Stops the voice smoothly.
 *              _GUS_VOICEMODE  - Alters the voice mode, don't start or stop voice (P1=voice mode)
 *              _GUS_VOICEBALA  - Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
 *              _GUS_VOICEFREQ  - Sets voice (sample) playback frequency (P1=Hz)
 *              _GUS_VOICEVOL   - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
 *              _GUS_VOICEVOL2  - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
 *                                (Like GUS_VOICEVOL but doesn't change the hw
 *                                volume. It just updates volume in the voice table).
 *
 *              _GUS_RAMPRANGE  - Sets limits for volume ramping (P1=low volume, P2=high volume)
 *              _GUS_RAMPRATE   - Sets the speed for volume ramping (P1=scale, P2=rate)
 *              _GUS_RAMPMODE   - Sets the volume ramping mode (P1=ramping mode)
 *              _GUS_RAMPON     - Starts volume ramping (no parameters)
 *              _GUS_RAMPOFF    - Stops volume ramping (no parameters)
 *              _GUS_VOLUME_SCALE - Changes the volume calculation constants
 *                                for all voices.
 */


#define _GUS_NUMVOICES          0x00
#define _GUS_VOICESAMPLE        0x01    /* OBSOLETE */
#define _GUS_VOICEON            0x02
#define _GUS_VOICEOFF           0x03
#define _GUS_VOICEMODE          0x04
#define _GUS_VOICEBALA          0x05
#define _GUS_VOICEFREQ          0x06
#define _GUS_VOICEVOL           0x07
#define _GUS_RAMPRANGE          0x08
#define _GUS_RAMPRATE           0x09
#define _GUS_RAMPMODE           0x0a
#define _GUS_RAMPON             0x0b
#define _GUS_RAMPOFF            0x0c
#define _GUS_VOICEFADE          0x0d
#define _GUS_VOLUME_SCALE       0x0e
#define _GUS_VOICEVOL2          0x0f
#define _GUS_VOICE_POS          0x10

/*
 *      GUS API macros
 */


#define _GUS_CMD(chn, voice, cmd, p1, p2) \
                                        {_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
                                        _seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
                                        _seqbuf[_seqbufptr+3] = voice;\
                                        *(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
                                        *(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
                                        _SEQ_ADVBUF(8);}


#define GUS_NUMVOICES(chn, p1)                  _GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
#define GUS_VOICESAMPLE(chn, voice, p1)         _GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0) /* OBSOLETE */
#define GUS_VOICEON(chn, voice, p1)             _GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
#define GUS_VOICEOFF(chn, voice)                _GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
#define GUS_VOICEFADE(chn, voice)               _GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
#define GUS_VOICEMODE(chn, voice, p1)           _GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
#define GUS_VOICEBALA(chn, voice, p1)           _GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
#define GUS_VOICEFREQ(chn, voice, p)            _GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
                                                        (p) & 0xffff, ((p) >> 16) & 0xffff)

#define GUS_VOICEVOL(chn, voice, p1)            _GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
#define GUS_VOICEVOL2(chn, voice, p1)           _GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
#define GUS_RAMPRANGE(chn, voice, low, high)    _GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
#define GUS_RAMPRATE(chn, voice, p1, p2)        _GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
#define GUS_RAMPMODE(chn, voice, p1)            _GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
#define GUS_RAMPON(chn, voice, p1)              _GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
#define GUS_RAMPOFF(chn, voice)                 _GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
#define GUS_VOLUME_SCALE(chn, voice, p1, p2)    _GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
#define GUS_VOICE_POS(chn, voice, p)            _GUS_CMD(chn, voice, _GUS_VOICE_POS, \
                                                        (p) & 0xffff, ((p) >> 16) & 0xffff)


#endif