Subversion Repositories shark

Rev

Rev 1049 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#ifndef __LINUX_HUB_H
#define __LINUX_HUB_H

/*
 * Hub protocol and driver data structures.
 *
 * Some of these are known to the "virtual root hub" code
 * in host controller drivers.
 */


#include <linux/list.h>
#include <linux/workqueue.h>
#include <linux/compiler.h>     /* likely()/unlikely() */

/*
 * Hub request types
 */


#define USB_RT_HUB      (USB_TYPE_CLASS | USB_RECIP_DEVICE)
#define USB_RT_PORT     (USB_TYPE_CLASS | USB_RECIP_OTHER)

/*
 * Hub class requests
 * See USB 2.0 spec Table 11-16
 */

#define HUB_CLEAR_TT_BUFFER     8
#define HUB_RESET_TT            9
#define HUB_GET_TT_STATE        10
#define HUB_STOP_TT             11

/*
 * Hub Class feature numbers
 * See USB 2.0 spec Table 11-17
 */

#define C_HUB_LOCAL_POWER       0
#define C_HUB_OVER_CURRENT      1

/*
 * Port feature numbers
 * See USB 2.0 spec Table 11-17
 */

#define USB_PORT_FEAT_CONNECTION        0
#define USB_PORT_FEAT_ENABLE            1
#define USB_PORT_FEAT_SUSPEND           2
#define USB_PORT_FEAT_OVER_CURRENT      3
#define USB_PORT_FEAT_RESET             4
#define USB_PORT_FEAT_POWER             8
#define USB_PORT_FEAT_LOWSPEED          9
#define USB_PORT_FEAT_HIGHSPEED         10
#define USB_PORT_FEAT_C_CONNECTION      16
#define USB_PORT_FEAT_C_ENABLE          17
#define USB_PORT_FEAT_C_SUSPEND         18
#define USB_PORT_FEAT_C_OVER_CURRENT    19
#define USB_PORT_FEAT_C_RESET           20
#define USB_PORT_FEAT_TEST              21
#define USB_PORT_FEAT_INDICATOR         22

/*
 * Hub Status and Hub Change results
 * See USB 2.0 spec Table 11-19 and Table 11-20
 */

struct usb_port_status {
        __u16 wPortStatus;
        __u16 wPortChange;     
} __attribute__ ((packed));

/*
 * wPortStatus bit field
 * See USB 2.0 spec Table 11-21
 */

#define USB_PORT_STAT_CONNECTION        0x0001
#define USB_PORT_STAT_ENABLE            0x0002
#define USB_PORT_STAT_SUSPEND           0x0004
#define USB_PORT_STAT_OVERCURRENT       0x0008
#define USB_PORT_STAT_RESET             0x0010
/* bits 5 to 7 are reserved */
#define USB_PORT_STAT_POWER             0x0100
#define USB_PORT_STAT_LOW_SPEED         0x0200
#define USB_PORT_STAT_HIGH_SPEED        0x0400
#define USB_PORT_STAT_TEST              0x0800
#define USB_PORT_STAT_INDICATOR         0x1000
/* bits 13 to 15 are reserved */

/*
 * wPortChange bit field
 * See USB 2.0 spec Table 11-22
 * Bits 0 to 4 shown, bits 5 to 15 are reserved
 */

#define USB_PORT_STAT_C_CONNECTION      0x0001
#define USB_PORT_STAT_C_ENABLE          0x0002
#define USB_PORT_STAT_C_SUSPEND         0x0004
#define USB_PORT_STAT_C_OVERCURRENT     0x0008
#define USB_PORT_STAT_C_RESET           0x0010

/*
 * wHubCharacteristics (masks)
 * See USB 2.0 spec Table 11-13, offset 3
 */

#define HUB_CHAR_LPSM           0x0003 /* D1 .. D0 */
#define HUB_CHAR_COMPOUND       0x0004 /* D2       */
#define HUB_CHAR_OCPM           0x0018 /* D4 .. D3 */
#define HUB_CHAR_TTTT           0x0060 /* D6 .. D5 */
#define HUB_CHAR_PORTIND        0x0080 /* D7       */

struct usb_hub_status {
        __u16 wHubStatus;
        __u16 wHubChange;
} __attribute__ ((packed));

/*
 * Hub Status & Hub Change bit masks
 * See USB 2.0 spec Table 11-19 and Table 11-20
 * Bits 0 and 1 for wHubStatus and wHubChange
 * Bits 2 to 15 are reserved for both
 */

#define HUB_STATUS_LOCAL_POWER  0x0001
#define HUB_STATUS_OVERCURRENT  0x0002
#define HUB_CHANGE_LOCAL_POWER  0x0001
#define HUB_CHANGE_OVERCURRENT  0x0002


/*
 * Hub descriptor
 * See USB 2.0 spec Table 11-13
 */


#define USB_DT_HUB                      (USB_TYPE_CLASS | 0x09)
#define USB_DT_HUB_NONVAR_SIZE          7

struct usb_hub_descriptor {
        __u8  bDescLength;
        __u8  bDescriptorType;
        __u8  bNbrPorts;
        __u16 wHubCharacteristics;
        __u8  bPwrOn2PwrGood;
        __u8  bHubContrCurrent;
                /* add 1 bit for hub status change; round to bytes */
        __u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
        __u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
} __attribute__ ((packed));

struct usb_device;

/*
 * As of USB 2.0, full/low speed devices are segregated into trees.
 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
 * The other type grows from high speed hubs when they connect to
 * full/low speed devices using "Transaction Translators" (TTs).
 *
 * TTs should only be known to the hub driver, and high speed bus
 * drivers (only EHCI for now).  They affect periodic scheduling and
 * sometimes control/bulk error recovery.
 */

struct usb_tt {
        struct usb_device       *hub;   /* upstream highspeed hub */
        int                     multi;  /* true means one TT per port */

        /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
        spinlock_t              lock;
        struct list_head        clear_list;     /* of usb_tt_clear */
        struct work_struct                      kevent;
};

struct usb_tt_clear {
        struct list_head        clear_list;
        unsigned                tt;
        u16                     devinfo;
};

extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe);

struct usb_hub {
        struct usb_interface    *intf;          /* the "real" device */
        struct urb              *urb;           /* for interrupt polling pipe */

        /* buffer for urb ... 1 bit each for hub and children, rounded up */
        char                    (*buffer)[(USB_MAXCHILDREN + 1 + 7) / 8];
        dma_addr_t              buffer_dma;     /* DMA address for buffer */
        union {
                struct usb_hub_status   hub;
                struct usb_port_status  port;
        }                       *status;        /* buffer for status reports */

        int                     error;          /* last reported error */
        int                     nerrors;        /* track consecutive errors */

        struct list_head        hub_list;       /* all hubs */
        struct list_head        event_list;     /* hubs w/data or errs ready */

        struct usb_hub_descriptor *descriptor;  /* class descriptor */
        struct semaphore        khubd_sem;
        struct usb_tt           tt;             /* Transaction Translator */
};

#endif /* __LINUX_HUB_H */