Subversion Repositories shark

Rev

Rev 420 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
    amd756.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring

    Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>

    Shamelessly ripped from i2c-piix4.c:

    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
    Philip Edelbrock <phil@netroedge.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/


/*
    2002-04-08: Added nForce support. (Csaba Halasz)
    2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
    2002-12-28: Rewritten into something that resembles a Linux driver (hch)
*/


/*
   Supports AMD756, AMD766, AMD768 and nVidia nForce
   Note: we assume there can only be one device, with one SMBus interface.
*/


/* #define DEBUG 1 */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <asm/io.h>

/* AMD756 SMBus address offsets */
#define SMB_ADDR_OFFSET         0xE0
#define SMB_IOSIZE              16
#define SMB_GLOBAL_STATUS       (0x0 + amd756_ioport)
#define SMB_GLOBAL_ENABLE       (0x2 + amd756_ioport)
#define SMB_HOST_ADDRESS        (0x4 + amd756_ioport)
#define SMB_HOST_DATA           (0x6 + amd756_ioport)
#define SMB_HOST_COMMAND        (0x8 + amd756_ioport)
#define SMB_HOST_BLOCK_DATA     (0x9 + amd756_ioport)
#define SMB_HAS_DATA            (0xA + amd756_ioport)
#define SMB_HAS_DEVICE_ADDRESS  (0xC + amd756_ioport)
#define SMB_HAS_HOST_ADDRESS    (0xE + amd756_ioport)
#define SMB_SNOOP_ADDRESS       (0xF + amd756_ioport)

/* PCI Address Constants */

/* address of I/O space */
#define SMBBA           0x058           /* mh */
#define SMBBANFORCE     0x014

/* general configuration */
#define SMBGCFG         0x041           /* mh */

/* silicon revision code */
#define SMBREV          0x008

/* Other settings */
#define MAX_TIMEOUT     500

/* AMD756 constants */
#define AMD756_QUICK            0x00
#define AMD756_BYTE             0x01
#define AMD756_BYTE_DATA        0x02
#define AMD756_WORD_DATA        0x03
#define AMD756_PROCESS_CALL     0x04
#define AMD756_BLOCK_DATA       0x05


static unsigned short amd756_ioport = 0;

/*
  SMBUS event = I/O 28-29 bit 11
     see E0 for the status bits and enabled in E2
     
*/

#define GS_ABRT_STS     (1 << 0)
#define GS_COL_STS      (1 << 1)
#define GS_PRERR_STS    (1 << 2)
#define GS_HST_STS      (1 << 3)
#define GS_HCYC_STS     (1 << 4)
#define GS_TO_STS       (1 << 5)
#define GS_SMB_STS      (1 << 11)

#define GS_CLEAR_STS    (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
                         GS_HCYC_STS | GS_TO_STS )


#define GE_CYC_TYPE_MASK        (7)
#define GE_HOST_STC             (1 << 3)
#define GE_ABORT                (1 << 5)


static int amd756_transaction(struct i2c_adapter *adap)
{
        int temp;
        int result = 0;
        int timeout = 0;

        dev_dbg(&adap->dev, ": Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
                "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
                inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
                inb_p(SMB_HOST_DATA));

        /* Make sure the SMBus host is ready to start transmitting */
        if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
                dev_dbg(&adap->dev, ": SMBus busy (%04x). Waiting... \n", temp);
                do {
                        i2c_delay(1);
                        temp = inw_p(SMB_GLOBAL_STATUS);
                } while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
                         (timeout++ < MAX_TIMEOUT));
                /* If the SMBus is still busy, we give up */
                if (timeout >= MAX_TIMEOUT) {
                        dev_dbg(&adap->dev, ": Busy wait timeout (%04x)\n", temp);
                        goto abort;
                }
                timeout = 0;
        }

        /* start the transaction by setting the start bit */
        outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);

        /* We will always wait for a fraction of a second! */
        do {
                i2c_delay(1);
                temp = inw_p(SMB_GLOBAL_STATUS);
        } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));

        /* If the SMBus is still busy, we give up */
        if (timeout >= MAX_TIMEOUT) {
                dev_dbg(&adap->dev, ": Completion timeout!\n");
                goto abort;
        }

        if (temp & GS_PRERR_STS) {
                result = -1;
                dev_dbg(&adap->dev, ": SMBus Protocol error (no response)!\n");
        }

        if (temp & GS_COL_STS) {
                result = -1;
                dev_warn(&adap->dev, " SMBus collision!\n");
        }

        if (temp & GS_TO_STS) {
                result = -1;
                dev_dbg(&adap->dev, ": SMBus protocol timeout!\n");
        }

        if (temp & GS_HCYC_STS)
                dev_dbg(&adap->dev, " SMBus protocol success!\n");

        outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);

#ifdef DEBUG
        if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
                dev_dbg(&adap->dev,
                        ": Failed reset at end of transaction (%04x)\n", temp);
        }
#endif

        dev_dbg(&adap->dev,
                ": Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
                inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
                inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));

        return result;

 abort:
        dev_warn(&adap->dev, ": Sending abort.\n");
        outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
        i2c_delay(100);
        outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
        return -1;
}

/* Return -1 on error. */
static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
                  unsigned short flags, char read_write,
                  u8 command, int size, union i2c_smbus_data * data)
{
        int i, len;

        /** TODO: Should I supporte the 10-bit transfers? */
        switch (size) {
        case I2C_SMBUS_PROC_CALL:
                dev_dbg(&adap->dev, ": I2C_SMBUS_PROC_CALL not supported!\n");
                /* TODO: Well... It is supported, I'm just not sure what to do here... */
                return -1;
        case I2C_SMBUS_QUICK:
                outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                       SMB_HOST_ADDRESS);
                size = AMD756_QUICK;
                break;
        case I2C_SMBUS_BYTE:
                outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                       SMB_HOST_ADDRESS);
                /* TODO: Why only during write? */
                if (read_write == I2C_SMBUS_WRITE)
                        outb_p(command, SMB_HOST_COMMAND);
                size = AMD756_BYTE;
                break;
        case I2C_SMBUS_BYTE_DATA:
                outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                       SMB_HOST_ADDRESS);
                outb_p(command, SMB_HOST_COMMAND);
                if (read_write == I2C_SMBUS_WRITE)
                        outw_p(data->byte, SMB_HOST_DATA);
                size = AMD756_BYTE_DATA;
                break;
        case I2C_SMBUS_WORD_DATA:
                outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                       SMB_HOST_ADDRESS);
                outb_p(command, SMB_HOST_COMMAND);
                if (read_write == I2C_SMBUS_WRITE)
                        outw_p(data->word, SMB_HOST_DATA);      /* TODO: endian???? */
                size = AMD756_WORD_DATA;
                break;
        case I2C_SMBUS_BLOCK_DATA:
                outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                       SMB_HOST_ADDRESS);
                outb_p(command, SMB_HOST_COMMAND);
                if (read_write == I2C_SMBUS_WRITE) {
                        len = data->block[0];
                        if (len < 0)
                                len = 0;
                        if (len > 32)
                                len = 32;
                        outw_p(len, SMB_HOST_DATA);
                        /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
                        for (i = 1; i <= len; i++)
                                outb_p(data->block[i],
                                       SMB_HOST_BLOCK_DATA);
                }
                size = AMD756_BLOCK_DATA;
                break;
        }

        /* How about enabling interrupts... */
        outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);

        if (amd756_transaction(adap))   /* Error in transaction */
                return -1;

        if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
                return 0;


        switch (size) {
        case AMD756_BYTE:
                data->byte = inw_p(SMB_HOST_DATA);
                break;
        case AMD756_BYTE_DATA:
                data->byte = inw_p(SMB_HOST_DATA);
                break;
        case AMD756_WORD_DATA:
                data->word = inw_p(SMB_HOST_DATA);      /* TODO: endian???? */
                break;
        case AMD756_BLOCK_DATA:
                data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
                if(data->block[0] > 32)
                        data->block[0] = 32;
                /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
                for (i = 1; i <= data->block[0]; i++)
                        data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
                break;
        }

        return 0;
}

static u32 amd756_func(struct i2c_adapter *adapter)
{
        return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
            I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
            I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
}

static struct i2c_algorithm smbus_algorithm = {
        .name           = "Non-I2C SMBus adapter",
        .id             = I2C_ALGO_SMBUS,
        .smbus_xfer     = amd756_access,
        .functionality  = amd756_func,
};

static struct i2c_adapter amd756_adapter = {
        .owner          = THIS_MODULE,
        .class          = I2C_ADAP_CLASS_SMBUS,
        .algo           = &smbus_algorithm,
        .name           = "unset",
};

enum chiptype { AMD756, AMD766, AMD768, NFORCE };

static struct pci_device_id amd756_ids[] = {
        {PCI_VENDOR_ID_AMD, 0x740B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD756 },
        {PCI_VENDOR_ID_AMD, 0x7413, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD766 },
        {PCI_VENDOR_ID_AMD, 0x7443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD768 },
        {PCI_VENDOR_ID_NVIDIA, 0x01B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE },
        { 0, }
};

static int __devinit amd756_probe(struct pci_dev *pdev,
                                  const struct pci_device_id *id)
{
        int nforce = (id->driver_data == NFORCE), error;
        u8 temp;
       
        if (amd756_ioport) {
                dev_err(&pdev->dev, ": Only one device supported. "
                       "(you have a strange motherboard, btw..)\n");
                return -ENODEV;
        }

        if (nforce) {
                if (PCI_FUNC(pdev->devfn) != 1)
                        return -ENODEV;

                pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
                amd756_ioport &= 0xfffc;
        } else { /* amd */
                if (PCI_FUNC(pdev->devfn) != 3)
                        return -ENODEV;

                pci_read_config_byte(pdev, SMBGCFG, &temp);
                if ((temp & 128) == 0) {
                        dev_err(&pdev->dev,
                                ": Error: SMBus controller I/O not enabled!\n");
                        return -ENODEV;
                }

                /* Determine the address of the SMBus areas */
                /* Technically it is a dword but... */
                pci_read_config_word(pdev, SMBBA, &amd756_ioport);
                amd756_ioport &= 0xff00;
                amd756_ioport += SMB_ADDR_OFFSET;
        }

        if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
                dev_err(&pdev->dev, ": SMB region 0x%x already in use!\n",
                        amd756_ioport);
                return -ENODEV;
        }

        pci_read_config_byte(pdev, SMBREV, &temp);
        dev_dbg(&pdev->dev, ": SMBREV = 0x%X\n", temp);
        dev_dbg(&pdev->dev, ": AMD756_smba = 0x%X\n", amd756_ioport);

        /* set up the driverfs linkage to our parent device */
        amd756_adapter.dev.parent = &pdev->dev;

        snprintf(amd756_adapter.name, I2C_NAME_SIZE,
                "SMBus AMD75x adapter at %04x", amd756_ioport);

        error = i2c_add_adapter(&amd756_adapter);
        if (error) {
                dev_err(&pdev->dev,
                        ": Adapter registration failed, module not inserted.\n");
                goto out_err;
        }

        return 0;

 out_err:
        release_region(amd756_ioport, SMB_IOSIZE);
        return error;
}

static void __devexit amd756_remove(struct pci_dev *dev)
{
        i2c_del_adapter(&amd756_adapter);
        release_region(amd756_ioport, SMB_IOSIZE);
}

static struct pci_driver amd756_driver = {
        .name           = "amd75x smbus",
        .id_table       = amd756_ids,
        .probe          = amd756_probe,
        .remove         = __devexit_p(amd756_remove),
};

static int __init amd756_init(void)
{
        return pci_module_init(&amd756_driver);
}

static void __exit amd756_exit(void)
{
        pci_unregister_driver(&amd756_driver);
}

MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
MODULE_DESCRIPTION("AMD756/766/768/nVidia nForce SMBus driver");
MODULE_LICENSE("GPL");

module_init(amd756_init)
module_exit(amd756_exit)