/*
bttv-cards.c
this file has configuration informations - card-specific stuff
like the big tvcards array for the most part
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
& Marcus Metzler (mocm@thp.uni-koeln.de)
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* SHARK version by Giacomo Guidi <giacomo@gandalf.sssup.it> */
#define __NO_VERSION__ 1
#include <unistd.h>
#include <linux/pci.h>
#include "drivers/bttv.h"
#include "drivers/tuner.h"
/* fwd decl */
static void boot_msp34xx
(struct bttv
*btv
, int pin
);
static void hauppauge_eeprom
(struct bttv
*btv
);
static void osprey_eeprom
(struct bttv
*btv
);
static void avermedia_eeprom
(struct bttv
*btv
);
static void init_PXC200
(struct bttv
*btv
);
#if 0
static void init_tea5757
(struct bttv
*btv
);
#endif
static void winview_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void lt9415_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void avermedia_tvphone_audio
(struct bttv
*btv
, struct video_audio
*v
,
int set
);
static void terratv_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void gvbctv3pci_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void winfast2000_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void pvbt878p9b_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void fv2000s_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void windvr_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
);
static void rv605_muxsel
(struct bttv
*btv
, unsigned int input
);
/* config variables */
static int triton1
=0;
static int vsfx
=0;
int no_overlay
=-1;
static unsigned int card
[4] = { -1, -1, -1, -1 };
static unsigned int pll
[4] = { -1, -1, -1, -1 };
static unsigned int tuner
[4] = { -1, -1, -1, -1 };
static unsigned int gpiomask
= -1;
static unsigned int audioall
= -1;
static unsigned int audiomux
[5] = { -1, -1, -1, -1, -1 };
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
static struct CARD
{
unsigned id
;
int cardnr
;
char *name
;
} cards
[] = {
{ 0x13eb0070, BTTV_HAUPPAUGE878
, "Hauppauge WinTV" },
{ 0x39000070, BTTV_HAUPPAUGE878
, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_HAUPPAUGE878
, "Hauppauge WinTV/PVR" },
{ 0xff000070, BTTV_OSPREY1x0
, "Osprey-100" },
{ 0xff010070, BTTV_OSPREY2x0_SVID
,"Osprey-200" },
{ 0x036e109e, BTTV_OSPREY2x0_SVID
,"Osprey-210" },
{ 0xff020070, BTTV_OSPREY5x0
, "Osprey-500" },
{ 0xff030070, BTTV_OSPREY2000
, "Osprey-2000" },
{ 0x00011002, BTTV_ATI_TVWONDER
, "ATI TV Wonder" },
{ 0x00031002, BTTV_ATI_TVWONDERVE
,"ATI TV Wonder/VE" },
{ 0x6606107d, BTTV_WINFAST2000
, "Leadtek WinFast TV 2000" },
{ 0x263610b4, BTTV_STB2
, "STB TV PCI FM, P/N 6000704" },
{ 0x402010fc, BTTV_GVBCTV3PCI
, "I-O Data Co. GV-BCTV3/PCI" },
{ 0x405010fc, BTTV_GVBCTV4PCI
, "I-O Data Co. GV-BCTV4/PCI" },
{ 0x1200bd11, BTTV_PINNACLE
, "Pinnacle PCTV" },
{ 0x001211bd, BTTV_PINNACLE
, "Pinnacle PCTV" },
{ 0x001c11bd, BTTV_PINNACLE
, "Pinnacle PCTV Sat" },
{ 0x3000121a, BTTV_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
{ 0x3000144f, BTTV_MAGICTVIEW063
, "(Askey Magic/others) TView99 CPH06x" },
{ 0x3002144f, BTTV_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH05x" },
{ 0x3005144f, BTTV_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
{ 0x00011461, BTTV_AVPHONE98
, "AVerMedia TVPhone98" },
{ 0x00021461, BTTV_AVERMEDIA98
, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_AVPHONE98
, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_AVERMEDIA98
, "AVerMedia TVCapture 98" },
{ 0x300014ff, BTTV_MAGICTVIEW061
, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_PHOEBE_TVMAS
, "Phoebe TV Master (CPH060)" },
{ 0x1117153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x1118153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x1119153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x111a153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x1123153b, BTTV_TERRATVRADIO
, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_TERRATV
, "Terratec TV+" },
// clashes with flyvideo
//{ 0x18521852, BTTV_TERRATV, "Terratec TV+" },
{ 0x1134153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x1135153b, BTTV_TERRATVALUER
, "Terratec TValue Radio" },
{ 0x5018153b, BTTV_TERRATVALUE
, "Terratec TValue" },
{ 0x400a15b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
{ 0x400d15b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
{ 0x401015b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
{ 0x401615b0, BTTV_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
{ 0x010115cb, BTTV_GMV1
, "AG GMV1" },
{ 0x010114c7, BTTV_MODTEC_205
, "Modular Technology MM205 PCTV" },
{ 0x18501851, BTTV_CHRONOS_VS2
, "Flyvideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_FLYVIDEO98EZ
, "Flyvideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_TYPHOON_TVIEW
, "Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
{ 0x10b42636, BTTV_HAUPPAUGE878
, "STB ???" },
{ 0x217d6606, BTTV_WINFAST2000
, "Leadtek WinFast TV 2000" },
{ 0x03116000, BTTV_SENSORAY311
, "Sensoray 311" },
{ 0x00790e11, BTTV_WINDVR
, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_ZOLTRIX
, "Face to Face Tvmax" },
{ 0x0350109e, BTTV_PXC200
, "Imagenation PXC200" },
{ 0, -1, NULL
}
};
/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards */
struct tvcard bttv_tvcards
[] = {
{
/* ---- card 0x00 ---------------------------------- */
name
: " *** UNKNOWN/GENERIC *** ",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
muxsel
: { 2, 3, 1, 0},
tuner_type
: -1,
},{
name
: "MIRO PCTV",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 2, 0, 0, 0, 10},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Hauppauge (bt848)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 1, 2, 3, 4},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "STB",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 4, 0, 2, 3, 1},
no_msp34xx
: 1,
needs_tvaudio
: 1,
tuner_type
: -1,
},{
/* ---- card 0x04 ---------------------------------- */
name
: "Intel",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: -1,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 1, 2, 3, 4},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Diamond DTV2000",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 3,
muxsel
: { 2, 3, 1, 0},
audiomux
: { 0, 1, 0, 1, 3},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "AVerMedia TVPhone",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 3,
muxsel
: { 2, 3, 1, 1},
gpiomask
: 0x0f,
audiomux
: { 0x0c, 0x04, 0x08, 0x04, 0},
/* 0x04 for some cards ?? */
needs_tvaudio
: 1,
tuner_type
: -1,
audio_hook
: avermedia_tvphone_audio
,
},{
name
: "MATRIX-Vision MV-Delta",
video_inputs
: 5,
audio_inputs
: 1,
tuner
: -1,
svhs
: 3,
gpiomask
: 0,
muxsel
: { 2, 3, 1, 0, 0},
audiomux
: {0 },
needs_tvaudio
: 1,
tuner_type
: -1,
},{
/* ---- card 0x08 ---------------------------------- */
name
: "FlyVideo II (Bt848) LR26",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xc00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "IXMicro TurboTV",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 3,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 1, 1, 2, 3, 0},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Hauppauge (bt878)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x0f, /* old: 7 */
muxsel
: { 2, 0, 1, 1},
audiomux
: { 0, 1, 2, 3, 4},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "MIRO PCTV pro",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x3014f,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x20001,0x10001, 0, 0,10},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
/* ---- card 0x0c ---------------------------------- */
name
: "ADS Technologies Channel Surfer TV",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 13, 14, 11, 7, 0, 0},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "AVerMedia TVCapture 98",
video_inputs
: 3,
audio_inputs
: 4,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 13, 14, 11, 7, 0, 0},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "Aimslab Video Highway Xtreme (VHX)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Zoltrix TV-Max",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: {0 , 0, 1 , 0, 10},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
/* ---- card 0x10 ---------------------------------- */
name
: "Pixelview PlayTV (bt878)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x01fe00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "Leadtek WinView 601",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x8300f8,
muxsel
: { 2, 3, 1, 1,0},
audiomux
: { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
needs_tvaudio
: 1,
tuner_type
: -1,
audio_hook
: winview_audio
,
has_radio
: 1,
},{
name
: "AVEC Intercapture",
video_inputs
: 3,
audio_inputs
: 2,
tuner
: 0,
svhs
: 2,
gpiomask
: 0,
muxsel
: {2, 3, 1, 1},
audiomux
: {1, 0, 0, 0, 0},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "LifeView FlyKit w/o Tuner",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: -1,
svhs
: -1,
gpiomask
: 0x8dff00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0 },
no_msp34xx
: 1,
tuner_type
: -1,
},{
/* ---- card 0x14 ---------------------------------- */
name
: "CEI Raffles Card",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
muxsel
: {2, 3, 1, 1},
tuner_type
: -1,
},{
name
: "Lucky Star Image World ConferenceTV",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x00fffe07,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 131072, 1, 1638400, 3, 4},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL_I
,
},{
name
: "Phoebe Tv Master + FM (CPH050)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xc00,
muxsel
: { 2, 3, 1, 1},
audiomux
: {0, 1, 0x800, 0x400, 0xc00, 0},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Modular Technology MM205 PCTV, bt878",
video_inputs
: 2,
audio_inputs
: 1,
tuner
: 0,
svhs
: -1,
gpiomask
: 7,
muxsel
: { 2, 3 },
audiomux
: { 0, 0, 0, 0, 0 },
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_ALPS_TSBB5_PAL_I
,
},{
/* ---- card 0x18 ---------------------------------- */
name
: "[many vendors] CPH05X/06X (bt878)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xe00,
muxsel
: { 2, 3, 1, 1},
audiomux
: {0x400, 0x400, 0x400, 0x400, 0xc00},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "Terratec/Vobis TV-Boostar",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 16777215,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 131072, 1, 1638400, 3,4},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Newer Hauppauge WinCam (bt878)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 3,
gpiomask
: 7,
muxsel
: { 2, 0, 1, 1},
audiomux
: { 0, 1, 2, 3, 4},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "MAXI TV Video PCI2",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xffff,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 1, 2, 3, 0xc00},
needs_tvaudio
: 1,
tuner_type
: TUNER_PHILIPS_SECAM
,
},{
/* ---- card 0x1c ---------------------------------- */
name
: "Terratec TerraTV+",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x70000,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
needs_tvaudio
: 1,
tuner_type
: TUNER_PHILIPS_PAL
,
audio_hook
: terratv_audio
,
},{
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
name
: "Imagenation PXC200",
video_inputs
: 5,
audio_inputs
: 1,
tuner
: -1,
svhs
: 1, /* was: 4 */
gpiomask
: 0,
muxsel
: { 2, 3, 1, 0, 0},
audiomux
: { 0 },
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "FlyVideo 98",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1800, //0x8dfe00
muxsel
: {2, 3, 1, 1},
audiomux
: { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "iProTV",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 1,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 1, 0, 0, 0, 0 },
tuner_type
: -1,
},{
/* ---- card 0x20 ---------------------------------- */
name
: "Intel Create and Share PCI",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: -1,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 4, 4, 4, 4, 4},
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "Terratec TerraTValue",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xffff00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x500, 0, 0x300, 0x900, 0x900},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL
,
},{
name
: "Leadtek WinFast 2000",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xc33000,
muxsel
: { 2, 3, 1, 1,0},
audiomux
: { 0x422000,0x001000,0x621100,0x620000,0x800000,0x620000},
needs_tvaudio
: 0,
pll
: PLL_28
,
tuner_type
: -1,
audio_hook
: winfast2000_audio
,
},{
name
: "Flyvideo 98 (LR50Q) / Chronos Video Shuttle II",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1800,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0x800, 0x1000, 0x1000, 0x1800},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
/* ---- card 0x24 ---------------------------------- */
name
: "Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1800,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
has_radio
: 1,
},{
name
: "PixelView PlayTV pro",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xff,
muxsel
: { 2, 3, 1, 1 },
audiomux
: { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "TView99 CPH06X",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x551e00,
muxsel
: { 2, 3, 1, 0},
audiomux
: { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "Pinnacle PCTV Studio/Rave",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x03000F,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 2, 0, 0, 0, 1},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
/* ---- card 0x28 ---------------------------------- */
name
: "STB2",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 4, 0, 2, 3, 1},
no_msp34xx
: 1,
needs_tvaudio
: 1,
tuner_type
: -1,
},{
name
: "AVerMedia TVPhone 98",
video_inputs
: 3,
audio_inputs
: 4,
tuner
: 0,
svhs
: 2,
gpiomask
: 12,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 13, 4, 11, 7, 0, 0},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
has_radio
: 1,
},{
name
: "ProVideo PV951", /* pic16c54 */
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0, 0, 0, 0},
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: 1,
},{
name
: "Little OnAir TV",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xe00b,
muxsel
: {2, 3, 1, 1},
audiomux
: {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
no_msp34xx
: 1,
tuner_type
: -1,
},{
/* ---- card 0x2c ---------------------------------- */
name
: "Sigma TVII-FM",
video_inputs
: 2,
audio_inputs
: 1,
tuner
: 0,
svhs
: -1,
gpiomask
: 3,
muxsel
: {2, 3, 1, 1},
audiomux
: {1, 1, 0, 2, 3},
no_msp34xx
: 1,
pll
: PLL_NONE
,
tuner_type
: -1,
},{
name
: "MATRIX-Vision MV-Delta 2",
video_inputs
: 5,
audio_inputs
: 1,
tuner
: -1,
svhs
: 3,
gpiomask
: 0,
muxsel
: { 2, 3, 1, 0, 0},
audiomux
: {0 },
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "Zoltrix Genie TV/FM",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xbcf03f,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: 21,
},{
name
: "Terratec TV/Radio+",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1f0000,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0xe2ffff, 0xebffff, 0, 0, 0xe0ffff, 0xe2ffff },
needs_tvaudio
: 1,
no_msp34xx
: 1,
pll
: PLL_35
,
tuner_type
: 1,
has_radio
: 1,
},{
/* ---- card 0x30 ---------------------------------- */
name
: "Dynalink Magic TView ",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: {2,0,0,0,1},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
name
: "IODATA GV-BCTV3/PCI",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x010f00,
muxsel
: {2, 3, 0, 0},
audiomux
: {0x10000, 0, 0x10000, 0, 0, 0},
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_ALPS_TSHC6_NTSC
,
audio_hook
: gvbctv3pci_audio
,
},{
name
: "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 3,
gpiomask
: 0xAA0000,
muxsel
: { 2,3,1,1 },
audiomux
: { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL_I
,
},{
name
: "Eagle Wireless Capricorn2 (bt878A)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 7,
muxsel
: { 2, 0, 1, 1},
audiomux
: { 0, 1, 2, 3, 4},
pll
: PLL_28
,
tuner_type
: -1 /* TUNER_ALPS_TMDH2_NTSC */,
},{
/* ---- card 0x34 ---------------------------------- */
/* David H€rdeman <david@2gen.com> */
name
: "Pinnacle PCTV Studio Pro",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x03000F,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 1, 0x10001, 0, 0, 10},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
name
: "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1c,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0, 0x10, 8, 4 },
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL_I
,
has_radio
: 1,
},{
/* Tim R€stermundt <rosterm@uni-muenster.de>
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
options tuner type=5 */
name
: "Lifetec LT 9415 TV (LR90 Rev.F)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x18e0,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
/* 0x0000: Tuner normal stereo
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
0x0880: Tuner A2 stereo */
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL
,
audio_hook
: lt9415_audio
,
has_radio
: 1,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
name
: "BESTBUY Easy TV (CPH031)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xF,
muxsel
: { 2, 3, 1, 0},
audiomux
: { 2, 0, 0, 0, 10},
needs_tvaudio
: 0,
pll
: PLL_28
,
tuner_type
: TUNER_TEMIC_PAL
,
},{
/* ---- card 0x38 ---------------------------------- */
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
name
: "FlyVideo '98/FM",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1800,
muxsel
: { 2, 3, 0, 1},
audiomux
: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: 5,
},{
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
* Steve Hosgood <steve@equiinet.com> */
name
: "GrandTec 'Grand Video Capture' (Bt848)",
video_inputs
: 2,
audio_inputs
: 0,
tuner
: -1,
svhs
: 1,
gpiomask
: 0,
muxsel
: { 3, 1 },
audiomux
: { 0 },
needs_tvaudio
: 0,
no_msp34xx
: 1,
pll
: PLL_35
,
tuner_type
: -1,
},{
/* Daniel Herrington <daniel.herrington@home.com> */
name
: "Phoebe TV Master Only (No FM) CPH060",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xe00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
needs_tvaudio
: 1,
pll
: PLL_NONE
,
tuner_type
: TUNER_TEMIC_4036FY5_NTSC
,
},{
/* Matti Mottus <mottus@physic.ut.ee> */
name
: "TV Capturer (CPH03X)",
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x03000F,
muxsel
: { 2, 3, 1, 0},
audiomux
: { 2,0,0,0,1 },
pll
: PLL_28
,
tuner_type
: 0,
},{
/* ---- card 0x3c ---------------------------------- */
/* Philip Blundell <philb@gnu.org> */
name
: "Modular Technology MM100PCTV",
video_inputs
: 2,
audio_inputs
: 2,
tuner
: 0,
svhs
: -1,
gpiomask
: 11,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 2, 0, 0, 1, 8},
pll
: PLL_35
,
tuner_type
: TUNER_TEMIC_PAL
,
},{
/* Adrian Cox <adrian@humboldt.co.uk */
name
: "AG Electronics GMV1",
video_inputs
: 2,
audio_inputs
: 0,
tuner
: -1,
svhs
: 1,
gpiomask
: 0xF,
muxsel
: { 2, 2},
audiomux
: { },
no_msp34xx
: 1,
needs_tvaudio
: 0,
pll
: PLL_28
,
tuner_type
: -1,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
new Easy TV BT878 version (model CPH061)
special thanks to Informatica Mieres for providing the card */
name
: "BESTBUY Easy TV (bt878)",
video_inputs
: 3,
audio_inputs
: 2,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xFF,
muxsel
: { 2, 3, 1, 0},
audiomux
: { 1, 0, 4, 4, 9},
needs_tvaudio
: 0,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL
,
},{
/* Lukas Gebauer <geby@volny.cz> */
name
: "ATI TV-Wonder",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xf03f,
muxsel
: { 2, 3, 1, 0 },
audiomux
: { 0xbffe, 0, 0xbfff, 0, 0xbffe},
pll
: PLL_28
,
tuner_type
: TUNER_TEMIC_4006FN5_MULTI_PAL
,
},{
/* ---- card 0x40 ---------------------------------- */
/* Lukas Gebauer <geby@volny.cz> */
name
: "ATI TV-Wonder VE",
video_inputs
: 2,
audio_inputs
: 1,
tuner
: 0,
svhs
: -1,
gpiomask
: 1,
muxsel
: { 2, 3, 0, 1},
audiomux
: { 0, 0, 1, 0, 0},
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_TEMIC_4006FN5_MULTI_PAL
,
},{
/* DeeJay <deejay@westel900.net (2000S) */
name
: "FlyVideo 2000S",
video_inputs
: 3,
audio_inputs
: 3,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x18e0,
muxsel
: { 2, 3, 0, 1},
/* Radio changed from 1e80 to 0x800 to make
Flyvideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
audiomux
: { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
audio_hook
: fv2000s_audio
,
no_msp34xx
: 1,
no_tda9875
: 1,
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: 5,
},{
name
: "Terratec TValueRadio",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0xffff00,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0x500, 0x500, 0x300, 0x900, 0x900},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_PHILIPS_PAL
,
has_radio
: 1,
},{
/* TANAKA Kei <peg00625@nifty.com> */
name
: "IODATA GV-BCTV4/PCI",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x010f00,
muxsel
: {2, 3, 0, 0},
audiomux
: {0x10000, 0, 0x10000, 0, 0, 0},
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: TUNER_SHARP_2U5JF5540_NTSC
,
audio_hook
: gvbctv3pci_audio
,
},{
/* ---- card 0x44 ---------------------------------- */
name
: "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
// try "insmod msp3400 simple=0" if you have
// sound problems with this card.
video_inputs
: 4,
audio_inputs
: 1,
tuner
: 0,
svhs
: -1,
gpiomask
: 0x4f8a00,
// 0x100000: 1=MSP enabled (0=disable again)
// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
audiomux
: {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
// tvtuner, radio, external,internal, mute, stereo
/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
muxsel
: { 2, 3 ,0 ,1},
tuner_type
: TUNER_MT2032
,
pll
: PLL_28
,
has_radio
: 1,
},{
/* Philip Blundell <pb@nexus.co.uk> */
name
: "Active Imaging AIMMS",
video_inputs
: 1,
audio_inputs
: 0,
tuner
: -1,
tuner_type
: -1,
pll
: PLL_28
,
muxsel
: { 2 },
gpiomask
: 0
},{
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
name
: "Pixelview PV-BT878P+ (Rev.4C)",
video_inputs
: 3,
audio_inputs
: 4,
tuner
: 0,
svhs
: 2,
gpiomask
: 15,
muxsel
: { 2, 3, 1, 1},
audiomux
: { 0, 0, 11, 7, 13, 0},
needs_tvaudio
: 1,
pll
: PLL_28
,
tuner_type
: 25,
},{
name
: "Flyvideo 98EZ (capture only)",
video_inputs
: 4,
audio_inputs
: 0,
tuner
: -1,
svhs
: 2,
muxsel
: { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
pll
: PLL_28
,
no_msp34xx
: 1,
},{
/* ---- card 0x48 ---------------------------------- */
/* Dariusz Kowalewski <darekk@automex.pl> */
name
: "Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x3f,
muxsel
: { 2, 3, 0, 1 },
audiomux
: { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
needs_tvaudio
: 1,
no_msp34xx
: 1,
no_tda9875
: 1,
pll
: PLL_28
,
tuner_type
: -1,
audio_hook
: pvbt878p9b_audio
,
has_radio
: 1,
},{
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the card to work */
name
: "Sensoray 311",
video_inputs
: 5,
audio_inputs
: 0,
tuner
: -1,
svhs
: 4,
gpiomask
: 0,
muxsel
: { 2, 3, 1, 0, 0},
audiomux
: { 0 },
needs_tvaudio
: 0,
tuner_type
: -1,
},{
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
name
: "RemoteVision MX (RV605)",
video_inputs
: 16,
audio_inputs
: 0,
tuner
: -1,
svhs
: -1,
gpiomask
: 0x00,
gpiomask2
: 0x07ff,
muxsel
: { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
no_msp34xx
: 1,
no_tda9875
: 1,
tuner_type
: -1,
muxsel_hook
: rv605_muxsel
,
},{
name
: "Powercolor MTV878/ MTV878R/ MTV878F",
video_inputs
: 3,
audio_inputs
: 2,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
muxsel
: { 2, 1, 1, },
audiomux
: { 0, 1, 2, 2, 4 },
needs_tvaudio
: 0,
tuner_type
: TUNER_PHILIPS_PAL
,
pll
: PLL_28
,
has_radio
: 1,
},{
/* ---- card 0x4c ---------------------------------- */
/* Masaki Suzuki <masaki@btree.org> */
name
: "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
video_inputs
: 3,
audio_inputs
: 1,
tuner
: 0,
svhs
: 2,
gpiomask
: 0x140007,
muxsel
: { 2, 3, 1, 1 },
audiomux
: { 0, 1, 2, 3, 4, 0 },
tuner_type
: TUNER_PHILIPS_NTSC
,
audio_hook
: windvr_audio
,
},{
name
: "GrandTec Multi Capture Card (Bt878)",
video_inputs
: 4,
audio_inputs
: 0,
tuner
: -1,
svhs
: -1,
gpiomask
: 0,
muxsel
: { 2, 3, 1, 0 },
audiomux
: { 0 },
needs_tvaudio
: 0,
no_msp34xx
: 1,
pll
: PLL_28
,
tuner_type
: -1,
},{
/* http://www.aopen.com/products/video/va1000.htm */
name
: "AOPEN VA1000",
video_inputs
: 3, /* coax, AV, s-vid */
audio_inputs
: 1,
tuner
: 0,
tuner_type
: TUNER_LG_PAL
, /* actually TP18PSB12P (PAL B/G) */
audiomux
: { 2, 0, 0, 0 },
muxsel
: { 2, 3, 1, 0 },
pll
: PLL_28
,
},{
name
: "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
video_inputs
: 4, /* id-inputs-clock */
audio_inputs
: 0,
tuner
: -1,
svhs
: 3,
muxsel
: { 3, 2, 0, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
/* ---- card 0x50 ---------------------------------- */
name
: "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
video_inputs
: 3,
audio_inputs
: 0,
tuner
: -1,
svhs
: 2,
muxsel
: { 2, 3, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 101 (848)", /* 0x05-40C0-C1 */
video_inputs
: 2,
audio_inputs
: 0,
tuner
: -1,
svhs
: 1,
muxsel
: { 3, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
video_inputs
: 1,
audio_inputs
: 0,
tuner
: -1,
svhs
: -1,
muxsel
: { 0 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
video_inputs
: 2,
audio_inputs
: 0,
tuner
: -1,
svhs
: 1,
muxsel
: { 0, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
/* ---- card 0x54 ---------------------------------- */
name
: "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
video_inputs
: 1,
audio_inputs
: 1,
tuner
: -1,
svhs
: -1,
muxsel
: { 0 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
video_inputs
: 2,
audio_inputs
: 1,
tuner
: -1,
svhs
: 1,
muxsel
: { 0, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
video_inputs
: 2,
audio_inputs
: 1,
tuner
: -1,
svhs
: 1,
muxsel
: { 2, 3 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
name
: "Osprey 5x0", /* 500 and 540 */
video_inputs
: 2,
audio_inputs
: 1,
tuner
: -1,
svhs
: 1,
muxsel
: { 0, 1 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1,
},{
/* ---- card 0x58 ---------------------------------- */
name
: "Osprey 2000", /* 2000 */
video_inputs
: 2,
audio_inputs
: 1,
tuner
: -1,
svhs
: 1,
muxsel
: { 2, 3 },
pll
: PLL_28
,
tuner_type
: -1,
no_msp34xx
: 1,
no_tda9875
: 1,
no_tda7432
: 1, /* must avoid, conflicts with the bt860 */
}};
const int bttv_num_tvcards
= (sizeof(bttv_tvcards
)/sizeof(struct tvcard
));
/* ----------------------------------------------------------------------- */
static unsigned char eeprom_data
[256];
/*
* identify card
*/
void bttv_idcard
(struct bttv
*btv
)
{
unsigned int gpiobits
;
int i
,type
;
unsigned short tmp
;
/* read PCI subsystem ID */
pci_read_config_word
(btv
->dev
, 2, &tmp
);
btv
->cardid
= tmp
<< 16;
pci_read_config_word
(btv
->dev
, 0, &tmp
);
btv
->cardid
|= tmp
;
printk
(KERN_INFO
,"cardid=%08x",btv
->cardid
);
if (0 != btv
->cardid
&& 0xffffffff != btv
->cardid
) {
/* look for the card */
for (type
= -1, i
= 0; cards
[i
].
id != 0; i
++)
if (cards
[i
].
id == btv
->cardid
)
type
= i
;
if (type
!= -1) {
/* found it */
printk
(KERN_INFO
"bttv%d: %s [card=%d], "
"PCI ID is %04x:%04x\n",
btv
->nr
,cards
[type
].
name,cards
[type
].
cardnr,
btv
->cardid
& 0xffff, btv
->cardid
>> 16);
btv
->type
= cards
[type
].
cardnr;
} else {
/* 404 */
printk
(KERN_INFO
"bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
btv
->nr
, btv
->cardid
&0xffff, btv
->cardid
>>16);
}
}
/* let the user override the autodetected type */
if (card
[btv
->nr
] >= 0 && card
[btv
->nr
] < bttv_num_tvcards
)
btv
->type
=card
[btv
->nr
];
/* print which card config we are using */
sprintf(btv
->video_dev.
name,"BT%d%s(%.23s)",
btv
->id
,
(btv
->id
==848 && btv
->revision
==0x12) ? "A" : "",
bttv_tvcards
[btv
->type
].
name);
printk
(KERN_INFO
"bttv%d: using: %s [card=%d,%s]\n",btv
->nr
,
btv
->video_dev.
name,btv
->type
,
(card
[btv
->nr
] >= 0 && card
[btv
->nr
] < bttv_num_tvcards
) ?
"insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (-1 == audioall
&& -1 == audiomux
[0])
return;
if (-1 != audiomux
[0]) {
gpiobits
= 0;
for (i
= 0; i
< 5; i
++) {
bttv_tvcards
[btv
->type
].
audiomux[i
] = audiomux
[i
];
gpiobits
|= audiomux
[i
];
}
} else {
gpiobits
= audioall
;
for (i
= 0; i
< 5; i
++) {
bttv_tvcards
[btv
->type
].
audiomux[i
] = audioall
;
}
}
bttv_tvcards
[btv
->type
].
gpiomask = (-1 != gpiomask
) ? gpiomask
: gpiobits
;
cprintf
("[info ] bttv%d: gpio config override: mask=0x%lx, mux=",
btv
->nr
,bttv_tvcards
[btv
->type
].
gpiomask);
for (i
= 0; i
< 5; i
++) {
cprintf
("%s0x%lx", i
? "," : "", bttv_tvcards
[btv
->type
].
audiomux[i
]);
}
cprintf
("\n");
}
/*
* (most) board specific initialisations goes here
*/
static void flyvideo_gpio
(struct bttv
*btv
)
{
int gpio
,outbits
;
int tuner
=-1,ttype
;
outbits
= btread
(BT848_GPIO_OUT_EN
);
btwrite
(0x00, BT848_GPIO_OUT_EN
);
udelay
(8); // without this we would see the 0x1800 mask
gpio
=gpioread
();
btwrite
(outbits
, BT848_GPIO_OUT_EN
);
// all cards provide GPIO info, some have an additional eeprom
// lowest 3 bytes are remote control codes (no handshake needed)
ttype
=(gpio
&0x0f0000)>>16;
switch(ttype
) {
case 0: tuner
=4; // None
break;
case 4: tuner
=5; // Philips PAL
break;
case 6: tuner
=37; // LG PAL (newer TAPC series)
break;
case 0xC: tuner
=3; // Philips SECAM(+PAL)
break;
default:
printk
(KERN_INFO
"bttv%d: flyvideo_gpio: unknown tuner type.\n", btv
->nr
);
}
printk
(KERN_INFO
"bttv%d: Flyvideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv
->nr
,
gpio
&0x400000? "yes":"no",
gpio
&0x800000? "yes":"no", tuner
, gpio
);
btv
->tuner_type
= tuner
;
btv
->has_radio
= gpio
&0x400000? 1:0;
}
int miro_tunermap
[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
int miro_fmtuner
[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,0,0,0 };
/* initialization part one -- before registering i2c bus */
void bttv_init_card1
(struct bttv
*btv
)
{
if (btv
->type
== BTTV_HAUPPAUGE
|| btv
->type
== BTTV_HAUPPAUGE878
)
boot_msp34xx
(btv
,5);
if (btv
->type
== BTTV_VOODOOTV_FM
)
boot_msp34xx
(btv
,20);
/*printk("bttv: end of init -- pre i2c\n");*/
}
/* initialization part one -- after registering i2c bus */
void bttv_init_card2
(struct bttv
*btv
)
{
/* miro/pinnacle */
if (btv
->type
== BTTV_MIRO
||
btv
->type
== BTTV_MIROPRO
||
btv
->type
== BTTV_PINNACLE
||
btv
->type
== BTTV_PINNACLEPRO
) {
int id
,msp
;
id
= ((gpioread
()>>10) & 31) -1;
msp
= bttv_I2CRead
(btv
, I2C_MSP3400
, "MSP34xx");
btv
->tuner_type
= miro_tunermap
[id
];
if (0 == (gpioread
() & 0x20)) {
btv
->has_radio
= 1;
if (!miro_fmtuner
[id
]) {
btv
->has_matchbox
= 1;
btv
->mbox_we
= (1<<6);
btv
->mbox_most
= (1<<7);
btv
->mbox_clk
= (1<<8);
btv
->mbox_data
= (1<<9);
btv
->mbox_mask
= (1<<6)|(1<<7)|(1<<8)|(1<<9);
}
} else {
btv
->has_radio
= 0;
}
if (-1 != msp
) {
if (btv
->type
== BTTV_MIRO
)
btv
->type
= BTTV_MIROPRO
;
if (btv
->type
== BTTV_PINNACLE
)
btv
->type
= BTTV_PINNACLEPRO
;
}
if (bttv_verbose
)
printk
(KERN_INFO
"bttv%d: miro: id=%d tuner=%d "
"radio=%s stereo=%s\n",
btv
->nr
, id
+1, btv
->tuner_type
,
!btv
->has_radio
? "no" :
(btv
->has_matchbox
? "matchbox" : "fmtuner"),
(-1 == msp
) ? "no" : "yes");
#if 0
if (btv
->has_matchbox
) {
if (bttv_verbose
)
printk
(KERN_INFO
"Initializing TEA5757...\n");
init_tea5757
(btv
);
}
#endif
}
if (btv
->type
== BTTV_FLYVIDEO_98
||
btv
->type
== BTTV_FLYVIDEO
||
btv
->type
== BTTV_TYPHOON_TVIEW
||
btv
->type
== BTTV_CHRONOS_VS2
||
btv
->type
== BTTV_FLYVIDEO_98FM
||
btv
->type
== BTTV_FLYVIDEO2000
||
btv
->type
== BTTV_FLYVIDEO98EZ
)
flyvideo_gpio
(btv
);
if (btv
->type
== BTTV_HAUPPAUGE
|| btv
->type
== BTTV_HAUPPAUGE878
) {
/* pick up some config infos from the eeprom */
bttv_readee
(btv
,eeprom_data
,0xa0);
hauppauge_eeprom
(btv
);
}
if ((btv
->type
>= BTTV_OSPREY_BEGIN
) && (btv
->type
<= BTTV_OSPREY_END
)) {
/* check for config info in the eeprom */
bttv_readee
(btv
,eeprom_data
,0xa0);
osprey_eeprom
(btv
);
}
if (btv
->type
== BTTV_AVERMEDIA98
|| btv
->type
== BTTV_AVPHONE98
) {
bttv_readee
(btv
,eeprom_data
,0xa0);
avermedia_eeprom
(btv
);
}
if (btv
->type
== BTTV_PXC200
)
init_PXC200
(btv
);
if (btv
->type
== BTTV_VHX
) {
btv
->has_radio
= 1;
btv
->has_matchbox
= 1;
btv
->mbox_we
= 0x20;
btv
->mbox_most
= 0;
btv
->mbox_clk
= 0x08;
btv
->mbox_data
= 0x10;
btv
->mbox_mask
= 0x38;
}
if (btv
->type
== BTTV_LIFETEC_9415
) {
if (gpioread
() & 0x4000)
cprintf
("bttv%d: lifetec: tv mono/fm stereo card\n", btv
->nr
);
else
cprintf
("bttv%d: lifetec: stereo(TDA9821) card\n",btv
->nr
);
}
if (btv
->type
== BTTV_MAGICTVIEW061
) {
if(btv
->cardid
== 0x4002144f) {
btv
->has_radio
=1;
cprintf
("bttv%d: radio detected by subsystem id (CPH05x)\n",btv
->nr
);
}
}
/* pll configuration */
if (!(btv
->id
==848 && btv
->revision
==0x11)) {
/* defaults from card list */
if (PLL_28
== bttv_tvcards
[btv
->type
].
pll) {
btv
->pll.
pll_ifreq=28636363;
btv
->pll.
pll_crystal=BT848_IFORM_XT0
;
}
if (PLL_35
== bttv_tvcards
[btv
->type
].
pll) {
btv
->pll.
pll_ifreq=35468950;
btv
->pll.
pll_crystal=BT848_IFORM_XT1
;
}
/* insmod options can override */
switch (pll
[btv
->nr
]) {
case 0: /* none */
btv
->pll.
pll_crystal = 0;
btv
->pll.
pll_ifreq = 0;
btv
->pll.
pll_ofreq = 0;
break;
case 1: /* 28 MHz */
case 28:
btv
->pll.
pll_ifreq = 28636363;
btv
->pll.
pll_ofreq = 0;
btv
->pll.
pll_crystal = BT848_IFORM_XT0
;
break;
case 2: /* 35 MHz */
case 35:
btv
->pll.
pll_ifreq = 35468950;
btv
->pll.
pll_ofreq = 0;
btv
->pll.
pll_crystal = BT848_IFORM_XT1
;
break;
}
}
/* tuner configuration (from card list / insmod option) */
if (-1 != bttv_tvcards
[btv
->type
].
tuner_type)
btv
->tuner_type
= bttv_tvcards
[btv
->type
].
tuner_type;
if (-1 != tuner
[btv
->nr
])
btv
->tuner_type
= tuner
[btv
->nr
];
if (bttv_tvcards
[btv
->type
].
has_radio)
btv
->has_radio
=1;
/* try to detect audio/fader chips */
if (!bttv_tvcards
[btv
->type
].
no_msp34xx &&
bttv_I2CRead
(btv
, I2C_MSP3400
, "MSP34xx") >=0) {
}
if (!bttv_tvcards
[btv
->type
].
no_tda9875 &&
bttv_I2CRead
(btv
, I2C_TDA9875
, "TDA9875") >=0) {
}
if (!bttv_tvcards
[btv
->type
].
no_tda7432 &&
bttv_I2CRead
(btv
, I2C_TDA7432
, "TDA7432") >=0) {
}
if (bttv_tvcards
[btv
->type
].
needs_tvaudio) {
}
if (bttv_tvcards
[btv
->type
].
tuner != -1) {
}
}
/* ----------------------------------------------------------------------- */
/* some hauppauge specific stuff */
static struct HAUPPAUGE_TUNER
{
int id
;
char *name
;
}
hauppauge_tuner
[] =
{
{ TUNER_ABSENT
, "" },
{ TUNER_ABSENT
, "External" },
{ TUNER_ABSENT
, "Unspecified" },
{ TUNER_PHILIPS_PAL
, "Philips FI1216" },
{ TUNER_PHILIPS_SECAM
, "Philips FI1216MF" },
{ TUNER_PHILIPS_NTSC
, "Philips FI1236" },
{ TUNER_PHILIPS_PAL_I
, "Philips FI1246" },
{ TUNER_PHILIPS_PAL_DK
,"Philips FI1256" },
{ TUNER_PHILIPS_PAL
, "Philips FI1216 MK2" },
{ TUNER_PHILIPS_SECAM
, "Philips FI1216MF MK2" },
{ TUNER_PHILIPS_NTSC
, "Philips FI1236 MK2" },
{ TUNER_PHILIPS_PAL_I
, "Philips FI1246 MK2" },
{ TUNER_PHILIPS_PAL_DK
,"Philips FI1256 MK2" },
{ TUNER_TEMIC_NTSC
, "Temic 4032FY5" },
{ TUNER_TEMIC_PAL
, "Temic 4002FH5" },
{ TUNER_TEMIC_PAL_I
, "Temic 4062FY5" },
{ TUNER_PHILIPS_PAL
, "Philips FR1216 MK2" },
{ TUNER_PHILIPS_SECAM
, "Philips FR1216MF MK2" },
{ TUNER_PHILIPS_NTSC
, "Philips FR1236 MK2" },
{ TUNER_PHILIPS_PAL_I
, "Philips FR1246 MK2" },
{ TUNER_PHILIPS_PAL_DK
,"Philips FR1256 MK2" },
{ TUNER_PHILIPS_PAL
, "Philips FM1216" },
{ TUNER_PHILIPS_SECAM
, "Philips FM1216MF" },
{ TUNER_PHILIPS_NTSC
, "Philips FM1236" },
{ TUNER_PHILIPS_PAL_I
, "Philips FM1246" },
{ TUNER_PHILIPS_PAL_DK
,"Philips FM1256" },
{ TUNER_TEMIC_4036FY5_NTSC
, "Temic 4036FY5" },
{ TUNER_ABSENT
, "Samsung TCPN9082D" },
{ TUNER_ABSENT
, "Samsung TCPM9092P" },
{ TUNER_TEMIC_4006FH5_PAL
, "Temic 4006FH5" },
{ TUNER_ABSENT
, "Samsung TCPN9085D" },
{ TUNER_ABSENT
, "Samsung TCPB9085P" },
{ TUNER_ABSENT
, "Samsung TCPL9091P" },
{ TUNER_TEMIC_4039FR5_NTSC
, "Temic 4039FR5" },
{ TUNER_PHILIPS_FQ1216ME
, "Philips FQ1216 ME" },
{ TUNER_TEMIC_4066FY5_PAL_I
, "Temic 4066FY5" },
{ TUNER_ABSENT
, "Philips TD1536" },
{ TUNER_ABSENT
, "Philips TD1536D" },
{ TUNER_PHILIPS_NTSC
, "Philips FMR1236" }, /* mono radio */
{ TUNER_ABSENT
, "Philips FI1256MP" },
{ TUNER_ABSENT
, "Samsung TCPQ9091P" },
{ TUNER_TEMIC_4006FN5_MULTI_PAL
, "Temic 4006FN5" },
{ TUNER_TEMIC_4009FR5_PAL
, "Temic 4009FR5" },
{ TUNER_TEMIC_4046FM5
, "Temic 4046FM5" },
{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM
, "Temic 4009FN5" },
{ TUNER_ABSENT
, "Philips TD1536D_FH_44"},
{ TUNER_LG_NTSC_FM
, "LG TP18NSR01F"},
{ TUNER_LG_PAL_FM
, "LG TP18PSB01D"},
{ TUNER_LG_PAL
, "LG TP18PSB11D"},
{ TUNER_LG_PAL_I_FM
, "LG TAPC-I001D"},
{ TUNER_LG_PAL_I
, "LG TAPC-I701D"}
};
static void hauppauge_eeprom
(struct bttv
*btv
)
{
int blk2
,tuner
,radio
,model
;
if (eeprom_data
[0] != 0x84 || eeprom_data
[2] != 0)
printk
(KERN_WARNING
"bttv%d: Hauppauge eeprom: invalid\n",
btv
->nr
);
/* Block 2 starts after len+3 bytes header */
blk2
= eeprom_data
[1] + 3;
/* decode + use some config infos */
model
= eeprom_data
[12] << 8 | eeprom_data
[11];
tuner
= eeprom_data
[9];
radio
= eeprom_data
[blk2
-1] & 0x01;
if (tuner
< sizeof(hauppauge_tuner
)/sizeof(struct HAUPPAUGE_TUNER
))
btv
->tuner_type
= hauppauge_tuner
[tuner
].
id;
if (radio
)
btv
->has_radio
= 1;
if (bttv_verbose
)
printk
(KERN_INFO
"bttv%d: Hauppauge eeprom: model=%d, "
"tuner=%s (%d), radio=%s\n",
btv
->nr
, model
, hauppauge_tuner
[tuner
].
name,
btv
->tuner_type
, radio
? "yes" : "no");
}
static void osprey_eeprom
(struct bttv
*btv
)
{
int i
= 0;
int detected_type
= btv
->type
;
unsigned char *ee
= eeprom_data
;
unsigned long serial
= 0;
if (bttv_debug
) {
printk
(KERN_INFO
"Osprey: EEPROM dump\n");
for(;i
<256; i
+= 16) {
cprintf
("[info ] Osprey 100:(%02X) %02X %02X %02X %02X %02X %02X %02X %02X -- %02X %02X %02X %02X %02X %02X %02X %02X\n",
i
,ee
[i
+ 0],ee
[i
+ 1],ee
[i
+ 2],ee
[i
+ 3],
ee
[i
+ 4],ee
[i
+ 5],ee
[i
+ 6],ee
[i
+ 7],
ee
[i
+ 8],ee
[i
+ 9],ee
[i
+10],ee
[i
+11],
ee
[i
+12],ee
[i
+13],ee
[i
+14],ee
[i
+15] );
}
}
if (btv
->type
== 0) {
/* this might be an antique...check for MMAC label in eeprom */
if ((ee
[0]=='M') && (ee
[1]=='M') && (ee
[2]=='A') && (ee
[3]=='C')) {
unsigned char checksum
= 0;
/* that looks like an old card...verify checksum */
for (i
=0; i
<21; i
++) checksum
+= ee
[i
];
if (checksum
== ee
[21]) {
btv
->type
= BTTV_OSPREY1x0_848
;
for (i
= 12; i
< 21; i
++) serial
*= 10,serial
+= ee
[i
] - '0';
}
}
} else {
/* we know this is an osprey card, find a valid eeprom descriptor */
int offset
= 4*16;
for(; offset
< 8*16; offset
+= 16) {
unsigned short checksum
= 0;
/* verify the checksum */
for(i
= 0; i
<14; i
++) checksum
+= ee
[i
+offset
];
checksum
= ~checksum
; /* no idea why */
if ((((checksum
>>8) & 0x0FF) == ee
[offset
+14]) &&
((checksum
& 0x0FF) == ee
[offset
+15])) {
break;
}
}
if (offset
< 8*16) {
/* found a valid descriptor */
unsigned short type
= (ee
[offset
+4]<<8) | (ee
[offset
+5]);
switch(type
) {
/* 848 based */
case 0x0004: {
btv
->type
= BTTV_OSPREY1x0_848
;
break;
}
case 0x0005: {
btv
->type
= BTTV_OSPREY101_848
;
break;
}
/* 878 based */
case 0x0012:
case 0x0013: {
btv
->type
= BTTV_OSPREY1x0
;
break;
}
case 0x0014:
case 0x0015: {
btv
->type
= BTTV_OSPREY1x1
;
break;
}
case 0x0016:
case 0x0017:
case 0x0020: {
btv
->type
= BTTV_OSPREY1x1_SVID
;
break;
}
case 0x0018:
case 0x0019:
case 0x001E:
case 0x001F: {
btv
->type
= BTTV_OSPREY2xx
;
break;
}
case 0x001A:
case 0x001B: {
btv
->type
= BTTV_OSPREY2x0_SVID
;
break;
}
case 0x0060:
case 0x0070: {
btv
->type
= BTTV_OSPREY2x0
;
//enable output on select control lines
btwrite
(0x000303, BT848_GPIO_OUT_EN
);
break;
}
default: {
/* unknown...leave as generic, but get a serial # */
break;
}
}
serial
= (ee
[offset
+6] << 24)
| (ee
[offset
+7] << 16)
| (ee
[offset
+8] << 8)
| (ee
[offset
+9]);
}
}
if ((btv
->type
!= detected_type
) || (serial
!= 0)){
/* reprint which card config we are using */
sprintf(btv
->video_dev.
name,"BT%d%s(%.23s)",
btv
->id
,
(btv
->id
==848 && btv
->revision
==0x12) ? "A" : "",
bttv_tvcards
[btv
->type
].
name);
printk
(KERN_INFO
"bttv%d: is now:%s [card=%d,%s] Serial#: %ld\n",
btv
->nr
,
btv
->video_dev.
name,
btv
->type
,
(card
[btv
->nr
] >= 0 && card
[btv
->nr
] < bttv_num_tvcards
) ?
"insmod option" : "autodetected",
serial
);
}
}
/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from bktr_card.c */
int tuner_0_table
[] = {
TUNER_PHILIPS_NTSC
, TUNER_PHILIPS_PAL
,
TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_SECAM
,
TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_PAL
};
#if 0
int tuner_0_fm_table
[] = {
PHILIPS_FR1236_NTSC
, PHILIPS_FR1216_PAL
,
PHILIPS_FR1216_PAL
, PHILIPS_FR1216_PAL
,
PHILIPS_FR1216_PAL
, PHILIPS_FR1216_PAL
,
PHILIPS_FR1236_SECAM
, PHILIPS_FR1236_SECAM
,
PHILIPS_FR1236_SECAM
, PHILIPS_FR1216_PAL
};
#endif
int tuner_1_table
[] = {
TUNER_TEMIC_NTSC
, TUNER_TEMIC_PAL
,
TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
TUNER_TEMIC_4012FY5
, TUNER_TEMIC_4012FY5
, //TUNER_TEMIC_SECAM
TUNER_TEMIC_4012FY5
, TUNER_TEMIC_PAL
};
static void avermedia_eeprom
(struct bttv
*btv
)
{
int tuner_make
,tuner_tv_fm
,tuner_format
,tuner
=0,remote
;
tuner_make
= (eeprom_data
[0x41] & 0x7);
tuner_tv_fm
= (eeprom_data
[0x41] & 0x18) >> 3;
tuner_format
= (eeprom_data
[0x42] & 0xf0) >> 4;
remote
= (eeprom_data
[0x42] & 0x01);
if (tuner_make
== 0 || tuner_make
== 2)
if(tuner_format
<=9)
tuner
= tuner_0_table
[tuner_format
];
if (tuner_make
== 1)
if(tuner_format
<=9)
tuner
= tuner_1_table
[tuner_format
];
cprintf
("[info ] bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv
->nr
,eeprom_data
[0x41],eeprom_data
[0x42]);
if(tuner
) {
btv
->tuner_type
=tuner
;
cprintf
("%d",tuner
);
} else
cprintf
("Unknown type");
cprintf
(" radio:%s remote control:%s\n",
tuner_tv_fm
?"yes":"no",
remote
?"yes":"no");
}
/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
void bttv_tda9880_setnorm
(struct bttv
*btv
, int norm
)
{
// fix up our card entry
if(norm
==VIDEO_MODE_NTSC
) {
bttv_tvcards
[BTTV_VOODOOTV_FM
].
audiomux[0]=0x957fff;
bttv_tvcards
[BTTV_VOODOOTV_FM
].
audiomux[4]=0x957fff;
dprintk
("bttv_tda9880_setnorm to NTSC\n");
}
else {
bttv_tvcards
[BTTV_VOODOOTV_FM
].
audiomux[0]=0x947fff;
bttv_tvcards
[BTTV_VOODOOTV_FM
].
audiomux[4]=0x947fff;
dprintk
("bttv_tda9880_setnorm to PAL\n");
}
// set GPIO according
gpioaor
(bttv_tvcards
[btv
->type
].
audiomux[btv
->audio
],
~bttv_tvcards
[btv
->type
].
gpiomask);
}
/*
* reset/enable the MSP on some Hauppauge cards
* Thanks to Ky€sti M€lkki (kmalkki@cc.hut.fi)!
*
* Hauppauge: pin 5
* Voodoo: pin 20
*/
static void boot_msp34xx
(struct bttv
*btv
, int pin
)
{
int mask
= (1 << pin
);
btor
(mask
, BT848_GPIO_OUT_EN
);
gpioand
(~mask
);
udelay
(2500);
gpioor
(mask
);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"msp34xx");
if (bttv_verbose
)
printk
(KERN_INFO
"bttv%d: Hauppauge/Voodoo msp34xx: reset line "
"init [%d]\n", btv
->nr
, pin
);
}
/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
/* This is basically the same procedure as
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */
static void init_PXC200
(struct bttv
*btv
)
{
/* Initialise GPIO-connevted stuff */
btwrite
(1<<13,BT848_GPIO_OUT_EN
); /* Reset pin only */
gpiowrite
(0);
udelay
(3);
gpiowrite
(1<<13);
/* GPIO inputs are pulled up, so no need to drive
* reset pin any longer */
btwrite
(0,BT848_GPIO_OUT_EN
);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"pxc200");
/* we could/should try and reset/control the AD pots? but
right now we simply turned off the crushing. Without
this the AGC drifts drifts
remember the EN is reverse logic -->
setting BT848_ADC_AGC_EN disable the AGC
tboult@eecs.lehigh.edu
*/
btwrite
(BT848_ADC_RESERVED
|BT848_ADC_AGC_EN
, BT848_ADC
);
/* Initialise MAX517 DAC */
printk
(KERN_INFO
"Setting DAC reference voltage level ...\n");
bttv_I2CWrite
(btv
,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commmands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */
printk
(KERN_INFO
"PXC200 Initialised.\n");
}
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
* This code is placed under the terms of the GNU General Public License
*
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
*/
#if 0
/* bus bits on the GPIO port */
#define TEA_WE 6
#define TEA_DATA 9
#define TEA_CLK 8
#define TEA_MOST 7
#endif
#define BUS_LOW(bit) gpioand(~(bit))
#define BUS_HIGH(bit) gpioor((bit))
#define BUS_IN(bit) (gpioread() & (bit))
/* TEA5757 register bits */
#define TEA_FREQ 0:14
#define TEA_BUFFER 15:15
#define TEA_SIGNAL_STRENGTH 16:17
#define TEA_PORT1 18:18
#define TEA_PORT0 19:19
#define TEA_BAND 20:21
#define TEA_BAND_FM 0
#define TEA_BAND_MW 1
#define TEA_BAND_LW 2
#define TEA_BAND_SW 3
#define TEA_MONO 22:22
#define TEA_ALLOW_STEREO 0
#define TEA_FORCE_MONO 1
#define TEA_SEARCH_DIRECTION 23:23
#define TEA_SEARCH_DOWN 0
#define TEA_SEARCH_UP 1
#define TEA_STATUS 24:24
#define TEA_STATUS_TUNED 0
#define TEA_STATUS_SEARCHING 1
/* ----------------------------------------------------------------------- */
/* winview */
void winview_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
int bits_out
, loops
, vol
, data
;
if (!set
) {
/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
v
->flags
|= VIDEO_AUDIO_VOLUME
;
return;
}
/* 32 levels logarithmic */
vol
= 32 - ((v
->volume
>>11));
/* units */
bits_out
= (PT2254_DBS_IN_2
>>(vol
%5));
/* tens */
bits_out
|= (PT2254_DBS_IN_10
>>(vol
/5));
bits_out
|= PT2254_L_CHANNEL
| PT2254_R_CHANNEL
;
data
= gpioread
();
data
&= ~
(WINVIEW_PT2254_CLK
| WINVIEW_PT2254_DATA
|
WINVIEW_PT2254_STROBE
);
for (loops
= 17; loops
>= 0 ; loops
--) {
if (bits_out
& (1<<loops
))
data
|= WINVIEW_PT2254_DATA
;
else
data
&= ~WINVIEW_PT2254_DATA
;
gpiowrite
(data
);
udelay
(5);
data
|= WINVIEW_PT2254_CLK
;
gpiowrite
(data
);
udelay
(5);
data
&= ~WINVIEW_PT2254_CLK
;
gpiowrite
(data
);
}
data
|= WINVIEW_PT2254_STROBE
;
data
&= ~WINVIEW_PT2254_DATA
;
gpiowrite
(data
);
udelay
(10);
data
&= ~WINVIEW_PT2254_STROBE
;
gpiowrite
(data
);
}
/* ----------------------------------------------------------------------- */
/* mono/stereo control for various cards (which don't use i2c chips but */
/* connect something to the GPIO pins */
static void
gvbctv3pci_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned int con
= 0;
if (set
) {
btor
(0x300, BT848_GPIO_OUT_EN
);
if (v
->mode
& VIDEO_SOUND_LANG1
)
con
= 0x000;
if (v
->mode
& VIDEO_SOUND_LANG2
)
con
= 0x300;
if (v
->mode
& VIDEO_SOUND_STEREO
)
con
= 0x200;
// if (v->mode & VIDEO_SOUND_MONO)
// con = 0x100;
gpioaor
(con
, ~
0x300);
} else {
v
->mode
= VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
/*
* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
* 0xdde enables mono and 0xccd enables sap
*
* Petr Vandrovec <VANDROVE@vc.cvut.cz>
* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
* input/output sound connection, so both must be set for output mode.
*
* Looks like it's needed only for the "tvphone", the "tvphone 98"
* handles this with a tda9840
*
*/
static void
avermedia_tvphone_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
int val
= 0;
if (set
) {
if (v
->mode
& VIDEO_SOUND_LANG1
) /* SAP */
val
= 0x02;
if (v
->mode
& VIDEO_SOUND_STEREO
)
val
= 0x01;
if (val
) {
gpioaor
(val
, ~
0x03);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"avermedia");
}
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
;
return;
}
}
/* Lifetec 9415 handling */
static void
lt9415_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
int val
= 0;
if (gpioread
() & 0x4000) {
v
->mode
= VIDEO_SOUND_MONO
;
return;
}
if (set
) {
if (v
->mode
& VIDEO_SOUND_LANG2
) /* A2 SAP */
val
= 0x0080;
if (v
->mode
& VIDEO_SOUND_STEREO
) /* A2 stereo */
val
= 0x0880;
if ((v
->mode
& VIDEO_SOUND_LANG1
) ||
(v
->mode
& VIDEO_SOUND_MONO
))
val
= 0;
gpioaor
(val
, ~
0x0880);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"lt9415");
} else {
/* autodetect doesn't work with this card :-( */
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
return;
}
}
static void
terratv_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned int con
= 0;
if (set
) {
btor
(0x180000, BT848_GPIO_OUT_EN
);
if (v
->mode
& VIDEO_SOUND_LANG2
)
con
= 0x080000;
if (v
->mode
& VIDEO_SOUND_STEREO
)
con
= 0x180000;
gpioaor
(con
, ~
0x180000);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"terratv");
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
static void
winfast2000_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned long val
= 0;
if (set
) {
/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
if (v
->mode
& VIDEO_SOUND_MONO
) /* Mono */
val
= 0x420000;
if (v
->mode
& VIDEO_SOUND_LANG1
) /* Mono */
val
= 0x420000;
if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
val
= 0x410000;
if (v
->mode
& VIDEO_SOUND_STEREO
) /* Stereo */
val
= 0x020000;
if (val
) {
gpioaor
(val
, ~
0x430000);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"winfast2000");
}
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
* revision 9B has on-board TDA9874A sound decoder).
*/
static void
pvbt878p9b_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned int val
= 0;
if (btv
->radio
)
return;
if (set
) {
if (v
->mode
& VIDEO_SOUND_MONO
) {
val
= 0x01;
}
if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
|| (v
->mode
& VIDEO_SOUND_STEREO
)) {
val
= 0x02;
}
if (val
) {
gpioaor
(val
, ~
0x03);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"pvbt878p9b");
}
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for FlyVideo 2000S (with tda9874 decoder)
* based on pvbt878p9b_audio() - this is not tested, please fix!!!
*/
static void
fv2000s_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned int val
= 0xffff;
if (btv
->radio
)
return;
if (set
) {
if (v
->mode
& VIDEO_SOUND_MONO
) {
val
= 0x0000;
}
if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
|| (v
->mode
& VIDEO_SOUND_STEREO
)) {
val
= 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
}
if (val
!= 0xffff) {
gpioaor
(val
, ~
0x1800);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"fv2000s");
}
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
/*
* sound control for Canopus WinDVR PCI
* Masaki Suzuki <masaki@btree.org>
*/
static void
windvr_audio
(struct bttv
*btv
, struct video_audio
*v
, int set
)
{
unsigned long val
= 0;
if (set
) {
if (v
->mode
& VIDEO_SOUND_MONO
)
val
= 0x040000;
if (v
->mode
& VIDEO_SOUND_LANG1
)
val
= 0;
if (v
->mode
& VIDEO_SOUND_LANG2
)
val
= 0x100000;
if (v
->mode
& VIDEO_SOUND_STEREO
)
val
= 0;
if (val
) {
gpioaor
(val
, ~
0x140000);
if (bttv_gpio
)
bttv_gpio_tracking
(btv
,"windvr");
}
} else {
v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
}
}
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
*
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
* switch instead (CD22M3494E). This IC can have multiple active connections
* between Xn (input) and Yn (output) pins. We need to clear any existing
* connection prior to establish a new one, pulsing the STROBE pin.
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
* GPIO[8] - - P3[5] (microcontroler)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
* GPINTR - - P3[4] (microcontroler)
*
* The microcontroler is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroler
* which is also wired to I2C interface. I have no further info on the
* microcontroler features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
static void rv605_muxsel
(struct bttv
*btv
, unsigned int input
)
{
/* reset all conections */
gpioaor
(0x200,~
0x200);
udelay
(1000);
gpioaor
(0x000,~
0x200);
udelay
(1000);
/* create a new conection */
gpioaor
(0x080,~
0x480);
gpioaor
(0x480,~
0x480);
udelay
(1000);
gpioaor
(0x080,~
0x480);
udelay
(1000);
}
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
void bttv_check_chipset
(void)
{
int pcipci_fail
= 0;
struct pci_dev dev
;
BYTE bus
, dv
;
triton1
= 0;
vsfx
= 0;
if (pci_device
(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_496
, 0, &bus
, &dv
)) pcipci_fail
= 1;
if (pci_device
(PCI_VENDOR_ID_SI
, PCI_DEVICE_ID_SI_5597
, 0, &bus
, &dv
)) pcipci_fail
= 1;
if (pci_device
(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82437
, 0, &bus
, &dv
)) triton1
= 1;
if (pci_device
(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82443BX_0
, 0, &bus
, &dv
)) triton1
= 1;
if (pci_device
(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C597_0
, 0, &bus
, &dv
)) triton1
= 1;
if (pci_device
(PCI_VENDOR_ID_VIA
, PCI_DEVICE_ID_VIA_82C576
, 0, &bus
, &dv
)) vsfx
= 1;
/* print warnings about any quirks found */
if (triton1
)
printk
(KERN_INFO
"bttv: Host bridge needs ETBF enabled.\n");
if (vsfx
)
printk
(KERN_INFO
"bttv: Host bridge needs VSFX enabled.\n");
if (pcipci_fail
) {
printk
(KERN_WARNING
"bttv: BT848 and your chipset may not work together.\n");
if (-1 == no_overlay
) {
printk
(KERN_WARNING
"bttv: going to disable overlay.\n");
no_overlay
= 1;
}
}
if(pci_device
(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82441
, 0, &bus
, &dv
)) {
unsigned char b
;
dev.
bus->number
= bus
;
dev.
devfn = dv
;
pci_read_config_byte
(&dev
, 0x53, &b
);
if (bttv_debug
)
printk
(KERN_INFO
"bttv: Host bridge: 82441FX Natoma, "
"bufcon=0x%02x\n",b
);
}
}
int bttv_handle_chipset
(struct bttv
*btv
)
{
unsigned char command
;
if (!triton1
&& !vsfx
)
return 0;
if (bttv_verbose
) {
if (triton1
)
printk
(KERN_INFO
"bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv
->nr
);
if (vsfx
&& btv
->id
>= 878)
printk
(KERN_INFO
"bttv%d: enabling VSFX\n",btv
->nr
);
}
if (btv
->id
< 878) {
/* bt848 (mis)uses a bit in the irq mask for etbf */
if (triton1
)
btv
->triton1
= BT848_INT_ETBF
;
} else {
/* bt878 has a bit in the pci config space for it */
pci_read_config_byte
(btv
->dev
, BT878_DEVCTRL
, &command
);
if (triton1
)
command
|= BT878_EN_TBFX
;
if (vsfx
)
command
|= BT878_EN_VSFX
;
pci_write_config_byte
(btv
->dev
, BT878_DEVCTRL
, command
);
}
return 0;
}