WebSVN - shark - Rev 272 - /shark/trunk/drivers/bttv/bttv-cards.c

/*
bttv-cards.c

this file has configuration informations - card-specific stuff
like the big tvcards array for the most part

Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
& Marcus Metzler (mocm@thp.uni-koeln.de)
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

/* SHARK version by Giacomo Guidi <giacomo@gandalf.sssup.it> */

#define __NO_VERSION__ 1

#include <unistd.h>
#include <linux/pci.h>

#include "drivers/bttv.h"
#include "drivers/tuner.h"

/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static void hauppauge_eeprom(struct bttv *btv);
static void osprey_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
#if 0
static void init_tea5757(struct bttv *btv);
#endif

static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
int set);
static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
static void rv605_muxsel(struct bttv *btv, unsigned int input);

/* config variables */
static int triton1=0;
static int vsfx=0;
int no_overlay=-1;
static unsigned int card[4] = { -1, -1, -1, -1 };
static unsigned int pll[4] = { -1, -1, -1, -1 };
static unsigned int tuner[4] = { -1, -1, -1, -1 };
static unsigned int gpiomask = -1;
static unsigned int audioall = -1;
static unsigned int audiomux[5] = { -1, -1, -1, -1, -1 };

/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */

static struct CARD {
unsigned id;
int cardnr;
char *name;
} cards[] = {
{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV/PVR" },
{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
{ 0x036e109e, BTTV_OSPREY2x0_SVID,"Osprey-210" },
{ 0xff020070, BTTV_OSPREY5x0, "Osprey-500" },
{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },

{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },

{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, P/N 6000704" },
{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },

{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV" },
{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
{ 0x001c11bd, BTTV_PINNACLE, "Pinnacle PCTV Sat" },

{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },

{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },

{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },

{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },

{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue" },
{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue" },
{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue" },
{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue" },
{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_TERRATV, "Terratec TV+" },
// clashes with flyvideo
//{ 0x18521852, BTTV_TERRATV, "Terratec TV+" },
{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue" },
{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" },
{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" },

{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },

{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM205 PCTV" },
{ 0x18501851, BTTV_CHRONOS_VS2, "Flyvideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_FLYVIDEO98EZ, "Flyvideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_TYPHOON_TVIEW, "Flyvideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
{ 0x0350109e, BTTV_PXC200, "Imagenation PXC200" },

{ 0, -1, NULL }
};

/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards */

struct tvcard bttv_tvcards[] = {
{
/* ---- card 0x00 ---------------------------------- */
name: " *** UNKNOWN/GENERIC *** ",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
muxsel: { 2, 3, 1, 0},
tuner_type: -1,
},{
name: "MIRO PCTV",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: { 2, 0, 0, 0, 10},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Hauppauge (bt848)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 1, 2, 3, 4},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "STB",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 4, 0, 2, 3, 1},
no_msp34xx: 1,
needs_tvaudio: 1,
tuner_type: -1,
},{

/* ---- card 0x04 ---------------------------------- */
name: "Intel",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: -1,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 1, 2, 3, 4},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Diamond DTV2000",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 3,
muxsel: { 2, 3, 1, 0},
audiomux: { 0, 1, 0, 1, 3},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "AVerMedia TVPhone",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 3,
muxsel: { 2, 3, 1, 1},
gpiomask: 0x0f,
audiomux: { 0x0c, 0x04, 0x08, 0x04, 0},
/* 0x04 for some cards ?? */
needs_tvaudio: 1,
tuner_type: -1,
audio_hook: avermedia_tvphone_audio,
},{
name: "MATRIX-Vision MV-Delta",
video_inputs: 5,
audio_inputs: 1,
tuner: -1,
svhs: 3,
gpiomask: 0,
muxsel: { 2, 3, 1, 0, 0},
audiomux: {0 },
needs_tvaudio: 1,
tuner_type: -1,
},{

/* ---- card 0x08 ---------------------------------- */
name: "FlyVideo II (Bt848) LR26",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xc00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "IXMicro TurboTV",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 3,
muxsel: { 2, 3, 1, 1},
audiomux: { 1, 1, 2, 3, 0},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Hauppauge (bt878)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x0f, /* old: 7 */
muxsel: { 2, 0, 1, 1},
audiomux: { 0, 1, 2, 3, 4},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "MIRO PCTV pro",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x3014f,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x20001,0x10001, 0, 0,10},
needs_tvaudio: 1,
tuner_type: -1,
},{

/* ---- card 0x0c ---------------------------------- */
name: "ADS Technologies Channel Surfer TV",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: { 13, 14, 11, 7, 0, 0},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "AVerMedia TVCapture 98",
video_inputs: 3,
audio_inputs: 4,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: { 13, 14, 11, 7, 0, 0},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "Aimslab Video Highway Xtreme (VHX)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Zoltrix TV-Max",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: {0 , 0, 1 , 0, 10},
needs_tvaudio: 1,
tuner_type: -1,
},{

/* ---- card 0x10 ---------------------------------- */
name: "Pixelview PlayTV (bt878)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x01fe00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "Leadtek WinView 601",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x8300f8,
muxsel: { 2, 3, 1, 1,0},
audiomux: { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
needs_tvaudio: 1,
tuner_type: -1,
audio_hook: winview_audio,
has_radio: 1,
},{
name: "AVEC Intercapture",
video_inputs: 3,
audio_inputs: 2,
tuner: 0,
svhs: 2,
gpiomask: 0,
muxsel: {2, 3, 1, 1},
audiomux: {1, 0, 0, 0, 0},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "LifeView FlyKit w/o Tuner",
video_inputs: 3,
audio_inputs: 1,
tuner: -1,
svhs: -1,
gpiomask: 0x8dff00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0 },
no_msp34xx: 1,
tuner_type: -1,
},{

/* ---- card 0x14 ---------------------------------- */
name: "CEI Raffles Card",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
muxsel: {2, 3, 1, 1},
tuner_type: -1,
},{
name: "Lucky Star Image World ConferenceTV",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x00fffe07,
muxsel: { 2, 3, 1, 1},
audiomux: { 131072, 1, 1638400, 3, 4},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL_I,
},{
name: "Phoebe Tv Master + FM (CPH050)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xc00,
muxsel: { 2, 3, 1, 1},
audiomux: {0, 1, 0x800, 0x400, 0xc00, 0},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Modular Technology MM205 PCTV, bt878",
video_inputs: 2,
audio_inputs: 1,
tuner: 0,
svhs: -1,
gpiomask: 7,
muxsel: { 2, 3 },
audiomux: { 0, 0, 0, 0, 0 },
no_msp34xx: 1,
pll: PLL_28,
tuner_type: TUNER_ALPS_TSBB5_PAL_I,
},{

/* ---- card 0x18 ---------------------------------- */
name: "[many vendors] CPH05X/06X (bt878)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xe00,
muxsel: { 2, 3, 1, 1},
audiomux: {0x400, 0x400, 0x400, 0x400, 0xc00},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "Terratec/Vobis TV-Boostar",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 16777215,
muxsel: { 2, 3, 1, 1},
audiomux: { 131072, 1, 1638400, 3,4},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Newer Hauppauge WinCam (bt878)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 3,
gpiomask: 7,
muxsel: { 2, 0, 1, 1},
audiomux: { 0, 1, 2, 3, 4},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "MAXI TV Video PCI2",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xffff,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 1, 2, 3, 0xc00},
needs_tvaudio: 1,
tuner_type: TUNER_PHILIPS_SECAM,
},{

/* ---- card 0x1c ---------------------------------- */
name: "Terratec TerraTV+",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x70000,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
needs_tvaudio: 1,
tuner_type: TUNER_PHILIPS_PAL,
audio_hook: terratv_audio,
},{
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
name: "Imagenation PXC200",
video_inputs: 5,
audio_inputs: 1,
tuner: -1,
svhs: 1, /* was: 4 */
gpiomask: 0,
muxsel: { 2, 3, 1, 0, 0},
audiomux: { 0 },
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "FlyVideo 98",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x1800, //0x8dfe00
muxsel: {2, 3, 1, 1},
audiomux: { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "iProTV",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 1,
muxsel: { 2, 3, 1, 1},
audiomux: { 1, 0, 0, 0, 0 },
tuner_type: -1,
},{

/* ---- card 0x20 ---------------------------------- */
name: "Intel Create and Share PCI",
video_inputs: 4,
audio_inputs: 1,
tuner: -1,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 4, 4, 4, 4, 4},
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "Terratec TerraTValue",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xffff00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x500, 0, 0x300, 0x900, 0x900},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL,
},{
name: "Leadtek WinFast 2000",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xc33000,
muxsel: { 2, 3, 1, 1,0},
audiomux: { 0x422000,0x001000,0x621100,0x620000,0x800000,0x620000},
needs_tvaudio: 0,
pll: PLL_28,
tuner_type: -1,
audio_hook: winfast2000_audio,
},{
name: "Flyvideo 98 (LR50Q) / Chronos Video Shuttle II",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
gpiomask: 0x1800,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{

/* ---- card 0x24 ---------------------------------- */
name: "Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
gpiomask: 0x1800,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
has_radio: 1,
},{
name: "PixelView PlayTV pro",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xff,
muxsel: { 2, 3, 1, 1 },
audiomux: { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
no_msp34xx: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "TView99 CPH06X",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x551e00,
muxsel: { 2, 3, 1, 0},
audiomux: { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "Pinnacle PCTV Studio/Rave",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x03000F,
muxsel: { 2, 3, 1, 1},
audiomux: { 2, 0, 0, 0, 1},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{

/* ---- card 0x28 ---------------------------------- */
name: "STB2",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 3, 1, 1},
audiomux: { 4, 0, 2, 3, 1},
no_msp34xx: 1,
needs_tvaudio: 1,
tuner_type: -1,
},{
name: "AVerMedia TVPhone 98",
video_inputs: 3,
audio_inputs: 4,
tuner: 0,
svhs: 2,
gpiomask: 12,
muxsel: { 2, 3, 1, 1},
audiomux: { 13, 4, 11, 7, 0, 0},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
has_radio: 1,
},{
name: "ProVideo PV951", /* pic16c54 */
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0, 0, 0, 0},
no_msp34xx: 1,
pll: PLL_28,
tuner_type: 1,
},{
name: "Little OnAir TV",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xe00b,
muxsel: {2, 3, 1, 1},
audiomux: {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
no_msp34xx: 1,
tuner_type: -1,
},{

/* ---- card 0x2c ---------------------------------- */
name: "Sigma TVII-FM",
video_inputs: 2,
audio_inputs: 1,
tuner: 0,
svhs: -1,
gpiomask: 3,
muxsel: {2, 3, 1, 1},
audiomux: {1, 1, 0, 2, 3},
no_msp34xx: 1,
pll: PLL_NONE,
tuner_type: -1,
},{
name: "MATRIX-Vision MV-Delta 2",
video_inputs: 5,
audio_inputs: 1,
tuner: -1,
svhs: 3,
gpiomask: 0,
muxsel: { 2, 3, 1, 0, 0},
audiomux: {0 },
no_msp34xx: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "Zoltrix Genie TV/FM",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xbcf03f,
muxsel: { 2, 3, 1, 1},
audiomux: { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
no_msp34xx: 1,
pll: PLL_28,
tuner_type: 21,
},{
name: "Terratec TV/Radio+",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x1f0000,
muxsel: { 2, 3, 1, 1},
audiomux: { 0xe2ffff, 0xebffff, 0, 0, 0xe0ffff, 0xe2ffff },
needs_tvaudio: 1,
no_msp34xx: 1,
pll: PLL_35,
tuner_type: 1,
has_radio: 1,
},{

/* ---- card 0x30 ---------------------------------- */
name: "Dynalink Magic TView ",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: {2,0,0,0,1},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
name: "IODATA GV-BCTV3/PCI",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x010f00,
muxsel: {2, 3, 0, 0},
audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
no_msp34xx: 1,
pll: PLL_28,
tuner_type: TUNER_ALPS_TSHC6_NTSC,
audio_hook: gvbctv3pci_audio,
},{
name: "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 3,
gpiomask: 0xAA0000,
muxsel: { 2,3,1,1 },
audiomux: { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
no_msp34xx: 1,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL_I,
},{
name: "Eagle Wireless Capricorn2 (bt878A)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 7,
muxsel: { 2, 0, 1, 1},
audiomux: { 0, 1, 2, 3, 4},
pll: PLL_28,
tuner_type: -1 /* TUNER_ALPS_TMDH2_NTSC */,
},{

/* ---- card 0x34 ---------------------------------- */
/* David Hrdeman <david@2gen.com> */
name: "Pinnacle PCTV Studio Pro",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x03000F,
muxsel: { 2, 3, 1, 1},
audiomux: { 1, 0x10001, 0, 0, 10},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: -1,
},{
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
name: "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
gpiomask: 0x1c,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0, 0x10, 8, 4 },
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL_I,
has_radio: 1,
},{
/* Tim Rstermundt <rosterm@uni-muenster.de>
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
options tuner type=5 */
name: "Lifetec LT 9415 TV (LR90 Rev.F)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x18e0,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
/* 0x0000: Tuner normal stereo
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
0x0880: Tuner A2 stereo */
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL,
audio_hook: lt9415_audio,
has_radio: 1,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
name: "BESTBUY Easy TV (CPH031)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xF,
muxsel: { 2, 3, 1, 0},
audiomux: { 2, 0, 0, 0, 10},
needs_tvaudio: 0,
pll: PLL_28,
tuner_type: TUNER_TEMIC_PAL,
},{

/* ---- card 0x38 ---------------------------------- */
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
name: "FlyVideo '98/FM",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
gpiomask: 0x1800,
muxsel: { 2, 3, 0, 1},
audiomux: { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: 5,
},{
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
* Steve Hosgood <steve@equiinet.com> */
name: "GrandTec 'Grand Video Capture' (Bt848)",
video_inputs: 2,
audio_inputs: 0,
tuner: -1,
svhs: 1,
gpiomask: 0,
muxsel: { 3, 1 },
audiomux: { 0 },
needs_tvaudio: 0,
no_msp34xx: 1,
pll: PLL_35,
tuner_type: -1,
},{
/* Daniel Herrington <daniel.herrington@home.com> */
name: "Phoebe TV Master Only (No FM) CPH060",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xe00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
needs_tvaudio: 1,
pll: PLL_NONE,
tuner_type: TUNER_TEMIC_4036FY5_NTSC,
},{
/* Matti Mottus <mottus@physic.ut.ee> */
name: "TV Capturer (CPH03X)",
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x03000F,
muxsel: { 2, 3, 1, 0},
audiomux: { 2,0,0,0,1 },
pll: PLL_28,
tuner_type: 0,
},{

/* ---- card 0x3c ---------------------------------- */
/* Philip Blundell <philb@gnu.org> */
name: "Modular Technology MM100PCTV",
video_inputs: 2,
audio_inputs: 2,
tuner: 0,
svhs: -1,
gpiomask: 11,
muxsel: { 2, 3, 1, 1},
audiomux: { 2, 0, 0, 1, 8},
pll: PLL_35,
tuner_type: TUNER_TEMIC_PAL,

},{
/* Adrian Cox <adrian@humboldt.co.uk */
name: "AG Electronics GMV1",
video_inputs: 2,
audio_inputs: 0,
tuner: -1,
svhs: 1,
gpiomask: 0xF,
muxsel: { 2, 2},
audiomux: { },
no_msp34xx: 1,
needs_tvaudio: 0,
pll: PLL_28,
tuner_type: -1,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
new Easy TV BT878 version (model CPH061)
special thanks to Informatica Mieres for providing the card */
name: "BESTBUY Easy TV (bt878)",
video_inputs: 3,
audio_inputs: 2,
tuner: 0,
svhs: 2,
gpiomask: 0xFF,
muxsel: { 2, 3, 1, 0},
audiomux: { 1, 0, 4, 4, 9},
needs_tvaudio: 0,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL,
},{
/* Lukas Gebauer <geby@volny.cz> */
name: "ATI TV-Wonder",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xf03f,
muxsel: { 2, 3, 1, 0 },
audiomux: { 0xbffe, 0, 0xbfff, 0, 0xbffe},
pll: PLL_28,
tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
},{

/* ---- card 0x40 ---------------------------------- */
/* Lukas Gebauer <geby@volny.cz> */
name: "ATI TV-Wonder VE",
video_inputs: 2,
audio_inputs: 1,
tuner: 0,
svhs: -1,
gpiomask: 1,
muxsel: { 2, 3, 0, 1},
audiomux: { 0, 0, 1, 0, 0},
no_msp34xx: 1,
pll: PLL_28,
tuner_type: TUNER_TEMIC_4006FN5_MULTI_PAL,
},{
/* DeeJay <deejay@westel900.net (2000S) */
name: "FlyVideo 2000S",
video_inputs: 3,
audio_inputs: 3,
tuner: 0,
svhs: 2,
gpiomask: 0x18e0,
muxsel: { 2, 3, 0, 1},
/* Radio changed from 1e80 to 0x800 to make
Flyvideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
audiomux: { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
audio_hook: fv2000s_audio,
no_msp34xx: 1,
no_tda9875: 1,
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: 5,
},{
name: "Terratec TValueRadio",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0xffff00,
muxsel: { 2, 3, 1, 1},
audiomux: { 0x500, 0x500, 0x300, 0x900, 0x900},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: TUNER_PHILIPS_PAL,
has_radio: 1,
},{
/* TANAKA Kei <peg00625@nifty.com> */
name: "IODATA GV-BCTV4/PCI",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x010f00,
muxsel: {2, 3, 0, 0},
audiomux: {0x10000, 0, 0x10000, 0, 0, 0},
no_msp34xx: 1,
pll: PLL_28,
tuner_type: TUNER_SHARP_2U5JF5540_NTSC,
audio_hook: gvbctv3pci_audio,
},{

/* ---- card 0x44 ---------------------------------- */
name: "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
// try "insmod msp3400 simple=0" if you have
// sound problems with this card.
video_inputs: 4,
audio_inputs: 1,
tuner: 0,
svhs: -1,
gpiomask: 0x4f8a00,
// 0x100000: 1=MSP enabled (0=disable again)
// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
audiomux: {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
// tvtuner, radio, external,internal, mute, stereo
/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
muxsel: { 2, 3 ,0 ,1},
tuner_type: TUNER_MT2032,
pll: PLL_28,
has_radio: 1,
},{
/* Philip Blundell <pb@nexus.co.uk> */
name: "Active Imaging AIMMS",
video_inputs: 1,
audio_inputs: 0,
tuner: -1,
tuner_type: -1,
pll: PLL_28,
muxsel: { 2 },
gpiomask: 0
},{
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
name: "Pixelview PV-BT878P+ (Rev.4C)",
video_inputs: 3,
audio_inputs: 4,
tuner: 0,
svhs: 2,
gpiomask: 15,
muxsel: { 2, 3, 1, 1},
audiomux: { 0, 0, 11, 7, 13, 0},
needs_tvaudio: 1,
pll: PLL_28,
tuner_type: 25,
},{
name: "Flyvideo 98EZ (capture only)",
video_inputs: 4,
audio_inputs: 0,
tuner: -1,
svhs: 2,
muxsel: { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
pll: PLL_28,
no_msp34xx: 1,
},{

/* ---- card 0x48 ---------------------------------- */
/* Dariusz Kowalewski <darekk@automex.pl> */
name: "Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x3f,
muxsel: { 2, 3, 0, 1 },
audiomux: { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
needs_tvaudio: 1,
no_msp34xx: 1,
no_tda9875: 1,
pll: PLL_28,
tuner_type: -1,
audio_hook: pvbt878p9b_audio,
has_radio: 1,
},{
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the card to work */
name: "Sensoray 311",
video_inputs: 5,
audio_inputs: 0,
tuner: -1,
svhs: 4,
gpiomask: 0,
muxsel: { 2, 3, 1, 0, 0},
audiomux: { 0 },
needs_tvaudio: 0,
tuner_type: -1,
},{
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
name: "RemoteVision MX (RV605)",
video_inputs: 16,
audio_inputs: 0,
tuner: -1,
svhs: -1,
gpiomask: 0x00,
gpiomask2: 0x07ff,
muxsel: { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
no_msp34xx: 1,
no_tda9875: 1,
tuner_type: -1,
muxsel_hook: rv605_muxsel,
},{
name: "Powercolor MTV878/ MTV878R/ MTV878F",
video_inputs: 3,
audio_inputs: 2,
tuner: 0,
svhs: 2,
gpiomask: 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
muxsel: { 2, 1, 1, },
audiomux: { 0, 1, 2, 2, 4 },
needs_tvaudio: 0,
tuner_type: TUNER_PHILIPS_PAL,
pll: PLL_28,
has_radio: 1,
},{

/* ---- card 0x4c ---------------------------------- */
/* Masaki Suzuki <masaki@btree.org> */
name: "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
video_inputs: 3,
audio_inputs: 1,
tuner: 0,
svhs: 2,
gpiomask: 0x140007,
muxsel: { 2, 3, 1, 1 },
audiomux: { 0, 1, 2, 3, 4, 0 },
tuner_type: TUNER_PHILIPS_NTSC,
audio_hook: windvr_audio,
},{
name: "GrandTec Multi Capture Card (Bt878)",
video_inputs: 4,
audio_inputs: 0,
tuner: -1,
svhs: -1,
gpiomask: 0,
muxsel: { 2, 3, 1, 0 },
audiomux: { 0 },
needs_tvaudio: 0,
no_msp34xx: 1,
pll: PLL_28,
tuner_type: -1,
},{
/* http://www.aopen.com/products/video/va1000.htm */
name: "AOPEN VA1000",
video_inputs: 3, /* coax, AV, s-vid */
audio_inputs: 1,
tuner: 0,
tuner_type: TUNER_LG_PAL, /* actually TP18PSB12P (PAL B/G) */
audiomux: { 2, 0, 0, 0 },
muxsel: { 2, 3, 1, 0 },
pll: PLL_28,
},{
name: "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
video_inputs: 4, /* id-inputs-clock */
audio_inputs: 0,
tuner: -1,
svhs: 3,
muxsel: { 3, 2, 0, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
/* ---- card 0x50 ---------------------------------- */
name: "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
video_inputs: 3,
audio_inputs: 0,
tuner: -1,
svhs: 2,
muxsel: { 2, 3, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 101 (848)", /* 0x05-40C0-C1 */
video_inputs: 2,
audio_inputs: 0,
tuner: -1,
svhs: 1,
muxsel: { 3, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
video_inputs: 1,
audio_inputs: 0,
tuner: -1,
svhs: -1,
muxsel: { 0 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
video_inputs: 2,
audio_inputs: 0,
tuner: -1,
svhs: 1,
muxsel: { 0, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
/* ---- card 0x54 ---------------------------------- */
name: "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
video_inputs: 1,
audio_inputs: 1,
tuner: -1,
svhs: -1,
muxsel: { 0 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
video_inputs: 2,
audio_inputs: 1,
tuner: -1,
svhs: 1,
muxsel: { 0, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
video_inputs: 2,
audio_inputs: 1,
tuner: -1,
svhs: 1,
muxsel: { 2, 3 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
name: "Osprey 5x0", /* 500 and 540 */
video_inputs: 2,
audio_inputs: 1,
tuner: -1,
svhs: 1,
muxsel: { 0, 1 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1,
},{
/* ---- card 0x58 ---------------------------------- */
name: "Osprey 2000", /* 2000 */
video_inputs: 2,
audio_inputs: 1,
tuner: -1,
svhs: 1,
muxsel: { 2, 3 },
pll: PLL_28,
tuner_type: -1,
no_msp34xx: 1,
no_tda9875: 1,
no_tda7432: 1, /* must avoid, conflicts with the bt860 */
}};

const int bttv_num_tvcards = (sizeof(bttv_tvcards)/sizeof(struct tvcard));

/* ----------------------------------------------------------------------- */

static unsigned char eeprom_data[256];

/*
* identify card
*/
void bttv_idcard(struct bttv *btv)
{
unsigned int gpiobits;
int i,type;
unsigned short tmp;

/* read PCI subsystem ID */
pci_read_config_word(btv->dev, 2, &tmp);
btv->cardid = tmp << 16;
pci_read_config_word(btv->dev, 0, &tmp);
btv->cardid |= tmp;

printk(KERN_INFO "cardid=%08x",btv->cardid);
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
/* look for the card */
for (type = -1, i = 0; cards[i].id != 0; i++)
if (cards[i].id == btv->cardid)
type = i;

if (type != -1) {
/* found it */
printk(KERN_INFO "bttv%d: %s [card=%d], "
"PCI ID is %04x:%04x\n",
btv->nr,cards[type].name,cards[type].cardnr,
btv->cardid & 0xffff, btv->cardid >> 16);
btv->type = cards[type].cardnr;
} else {
/* 404 */
printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
btv->nr, btv->cardid&0xffff, btv->cardid>>16);
}
}

/* let the user override the autodetected type */
if (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards)
btv->type=card[btv->nr];

/* print which card config we are using */
sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
btv->id,
(btv->id==848 && btv->revision==0x12) ? "A" : "",
bttv_tvcards[btv->type].name);
printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
btv->video_dev.name,btv->type,
(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
"insmod option" : "autodetected");

/* overwrite gpio stuff ?? */
if (-1 == audioall && -1 == audiomux[0])
return;

if (-1 != audiomux[0]) {
gpiobits = 0;
for (i = 0; i < 5; i++) {
bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
for (i = 0; i < 5; i++) {
bttv_tvcards[btv->type].audiomux[i] = audioall;
}
}
bttv_tvcards[btv->type].gpiomask = (-1 != gpiomask) ? gpiomask : gpiobits;
cprintf("[info ] bttv%d: gpio config override: mask=0x%lx, mux=",
btv->nr,bttv_tvcards[btv->type].gpiomask);
for (i = 0; i < 5; i++) {
cprintf("%s0x%lx", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
}
cprintf("\n");
}

/*
* (most) board specific initialisations goes here
*/

static void flyvideo_gpio(struct bttv *btv)
{
int gpio,outbits;
int tuner=-1,ttype;

outbits = btread(BT848_GPIO_OUT_EN);
btwrite(0x00, BT848_GPIO_OUT_EN);
udelay(8); // without this we would see the 0x1800 mask
gpio=gpioread();
btwrite(outbits, BT848_GPIO_OUT_EN);
// all cards provide GPIO info, some have an additional eeprom

// lowest 3 bytes are remote control codes (no handshake needed)
ttype=(gpio&0x0f0000)>>16;
switch(ttype) {
case 0: tuner=4; // None
break;
case 4: tuner=5; // Philips PAL
break;
case 6: tuner=37; // LG PAL (newer TAPC series)
break;
case 0xC: tuner=3; // Philips SECAM(+PAL)
break;
default:
printk(KERN_INFO "bttv%d: flyvideo_gpio: unknown tuner type.\n", btv->nr);
}

printk(KERN_INFO "bttv%d: Flyvideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv->nr,
gpio&0x400000? "yes":"no",
gpio&0x800000? "yes":"no", tuner, gpio);

btv->tuner_type = tuner;
btv->has_radio = gpio&0x400000? 1:0;
}

int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,0,0,0 };

/* initialization part one -- before registering i2c bus */
void bttv_init_card1(struct bttv *btv)
{
if (btv->type == BTTV_HAUPPAUGE || btv->type == BTTV_HAUPPAUGE878)
boot_msp34xx(btv,5);
if (btv->type == BTTV_VOODOOTV_FM)
boot_msp34xx(btv,20);

/*printk("bttv: end of init -- pre i2c\n");*/
}

/* initialization part one -- after registering i2c bus */
void bttv_init_card2(struct bttv *btv)
{
/* miro/pinnacle */
if (btv->type == BTTV_MIRO ||
btv->type == BTTV_MIROPRO ||
btv->type == BTTV_PINNACLE ||
btv->type == BTTV_PINNACLEPRO) {
int id,msp;
id = ((gpioread()>>10) & 31) -1;
msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
btv->tuner_type = miro_tunermap[id];
if (0 == (gpioread() & 0x20)) {
btv->has_radio = 1;
if (!miro_fmtuner[id]) {
btv->has_matchbox = 1;
btv->mbox_we = (1<<6);
btv->mbox_most = (1<<7);
btv->mbox_clk = (1<<8);
btv->mbox_data = (1<<9);
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
}
} else {
btv->has_radio = 0;
}
if (-1 != msp) {
if (btv->type == BTTV_MIRO)
btv->type = BTTV_MIROPRO;
if (btv->type == BTTV_PINNACLE)
btv->type = BTTV_PINNACLEPRO;
}
if (bttv_verbose)
printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d "
"radio=%s stereo=%s\n",
btv->nr, id+1, btv->tuner_type,
!btv->has_radio ? "no" :
(btv->has_matchbox ? "matchbox" : "fmtuner"),
(-1 == msp) ? "no" : "yes");
#if 0
if (btv->has_matchbox) {
if (bttv_verbose)
printk(KERN_INFO "Initializing TEA5757...\n");
init_tea5757(btv);
}
#endif
}

if (btv->type == BTTV_FLYVIDEO_98 ||
btv->type == BTTV_FLYVIDEO ||
btv->type == BTTV_TYPHOON_TVIEW ||
btv->type == BTTV_CHRONOS_VS2 ||
btv->type == BTTV_FLYVIDEO_98FM ||
btv->type == BTTV_FLYVIDEO2000 ||
btv->type == BTTV_FLYVIDEO98EZ)
flyvideo_gpio(btv);

if (btv->type == BTTV_HAUPPAUGE || btv->type == BTTV_HAUPPAUGE878) {
/* pick up some config infos from the eeprom */
bttv_readee(btv,eeprom_data,0xa0);
hauppauge_eeprom(btv);
}

if ((btv->type >= BTTV_OSPREY_BEGIN) && (btv->type <= BTTV_OSPREY_END)) {
/* check for config info in the eeprom */
bttv_readee(btv,eeprom_data,0xa0);
osprey_eeprom(btv);
}

if (btv->type == BTTV_AVERMEDIA98 || btv->type == BTTV_AVPHONE98) {
bttv_readee(btv,eeprom_data,0xa0);
avermedia_eeprom(btv);
}

if (btv->type == BTTV_PXC200)
init_PXC200(btv);

if (btv->type == BTTV_VHX) {
btv->has_radio = 1;
btv->has_matchbox = 1;
btv->mbox_we = 0x20;
btv->mbox_most = 0;
btv->mbox_clk = 0x08;
btv->mbox_data = 0x10;
btv->mbox_mask = 0x38;
}

if (btv->type == BTTV_LIFETEC_9415) {
if (gpioread() & 0x4000)
cprintf("bttv%d: lifetec: tv mono/fm stereo card\n", btv->nr);
else
cprintf("bttv%d: lifetec: stereo(TDA9821) card\n",btv->nr);
}

if (btv->type == BTTV_MAGICTVIEW061) {
if(btv->cardid == 0x4002144f) {
btv->has_radio=1;
cprintf("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
}
}

/* pll configuration */
if (!(btv->id==848 && btv->revision==0x11)) {
/* defaults from card list */
if (PLL_28 == bttv_tvcards[btv->type].pll) {
btv->pll.pll_ifreq=28636363;
btv->pll.pll_crystal=BT848_IFORM_XT0;
}
if (PLL_35 == bttv_tvcards[btv->type].pll) {
btv->pll.pll_ifreq=35468950;
btv->pll.pll_crystal=BT848_IFORM_XT1;
}
/* insmod options can override */
switch (pll[btv->nr]) {
case 0: /* none */
btv->pll.pll_crystal = 0;
btv->pll.pll_ifreq = 0;
btv->pll.pll_ofreq = 0;
break;
case 1: /* 28 MHz */
case 28:
btv->pll.pll_ifreq = 28636363;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT0;
break;
case 2: /* 35 MHz */
case 35:
btv->pll.pll_ifreq = 35468950;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT1;
break;
}
}

/* tuner configuration (from card list / insmod option) */
if (-1 != bttv_tvcards[btv->type].tuner_type)
btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
if (-1 != tuner[btv->nr])
btv->tuner_type = tuner[btv->nr];

if (bttv_tvcards[btv->type].has_radio)
btv->has_radio=1;

/* try to detect audio/fader chips */
if (!bttv_tvcards[btv->type].no_msp34xx &&
bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
}

if (!bttv_tvcards[btv->type].no_tda9875 &&
bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
}

if (!bttv_tvcards[btv->type].no_tda7432 &&
bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
}

if (bttv_tvcards[btv->type].needs_tvaudio) {
}

if (bttv_tvcards[btv->type].tuner != -1) {
}
}

/* ----------------------------------------------------------------------- */
/* some hauppauge specific stuff */

static struct HAUPPAUGE_TUNER
{
int id;
char *name;
}
hauppauge_tuner[] =
{
{ TUNER_ABSENT, "" },
{ TUNER_ABSENT, "External" },
{ TUNER_ABSENT, "Unspecified" },
{ TUNER_PHILIPS_PAL, "Philips FI1216" },
{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
{ TUNER_PHILIPS_PAL, "Philips FM1216" },
{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
{ TUNER_ABSENT, "Samsung TCPN9082D" },
{ TUNER_ABSENT, "Samsung TCPM9092P" },
{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
{ TUNER_ABSENT, "Samsung TCPN9085D" },
{ TUNER_ABSENT, "Samsung TCPB9085P" },
{ TUNER_ABSENT, "Samsung TCPL9091P" },
{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
{ TUNER_ABSENT, "Philips TD1536" },
{ TUNER_ABSENT, "Philips TD1536D" },
{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
{ TUNER_ABSENT, "Philips FI1256MP" },
{ TUNER_ABSENT, "Samsung TCPQ9091P" },
{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
{ TUNER_LG_NTSC_FM, "LG TP18NSR01F"},
{ TUNER_LG_PAL_FM, "LG TP18PSB01D"},
{ TUNER_LG_PAL, "LG TP18PSB11D"},
{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
};

static void hauppauge_eeprom(struct bttv *btv)
{
int blk2,tuner,radio,model;

if (eeprom_data[0] != 0x84 || eeprom_data[2] != 0)
printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
btv->nr);

/* Block 2 starts after len+3 bytes header */
blk2 = eeprom_data[1] + 3;

/* decode + use some config infos */
model = eeprom_data[12] << 8 | eeprom_data[11];
tuner = eeprom_data[9];
radio = eeprom_data[blk2-1] & 0x01;

if (tuner < sizeof(hauppauge_tuner)/sizeof(struct HAUPPAUGE_TUNER))
btv->tuner_type = hauppauge_tuner[tuner].id;
if (radio)
btv->has_radio = 1;

if (bttv_verbose)
printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
"tuner=%s (%d), radio=%s\n",
btv->nr, model, hauppauge_tuner[tuner].name,
btv->tuner_type, radio ? "yes" : "no");
}

static void osprey_eeprom(struct bttv *btv)
{
int i = 0;
int detected_type = btv->type;
unsigned char *ee = eeprom_data;
unsigned long serial = 0;

if (bttv_debug) {
printk(KERN_INFO "Osprey: EEPROM dump\n");
for(;i<256; i+= 16) {
cprintf("[info ] Osprey 100:(%02X) %02X %02X %02X %02X %02X %02X %02X %02X -- %02X %02X %02X %02X %02X %02X %02X %02X\n",
i,ee[i+ 0],ee[i+ 1],ee[i+ 2],ee[i+ 3],
ee[i+ 4],ee[i+ 5],ee[i+ 6],ee[i+ 7],
ee[i+ 8],ee[i+ 9],ee[i+10],ee[i+11],
ee[i+12],ee[i+13],ee[i+14],ee[i+15] );
}
}

if (btv->type == 0) {
/* this might be an antique...check for MMAC label in eeprom */
if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
unsigned char checksum = 0;
/* that looks like an old card...verify checksum */
for (i =0; i<21; i++) checksum += ee[i];
if (checksum == ee[21]) {
btv->type = BTTV_OSPREY1x0_848;
for (i = 12; i < 21; i++) serial *= 10,serial += ee[i] - '0';
}
}
} else {
/* we know this is an osprey card, find a valid eeprom descriptor */
int offset = 4*16;

for(; offset < 8*16; offset += 16) {
unsigned short checksum = 0;
/* verify the checksum */
for(i = 0; i<14; i++) checksum += ee[i+offset];
checksum = ~checksum; /* no idea why */
if ((((checksum>>8) & 0x0FF) == ee[offset+14]) &&
((checksum & 0x0FF) == ee[offset+15])) {
break;
}
}

if (offset < 8*16) {
/* found a valid descriptor */
unsigned short type = (ee[offset+4]<<8) | (ee[offset+5]);

switch(type) {
/* 848 based */
case 0x0004: {
btv->type = BTTV_OSPREY1x0_848;
break;
}
case 0x0005: {
btv->type = BTTV_OSPREY101_848;
break;
}
/* 878 based */
case 0x0012:
case 0x0013: {
btv->type = BTTV_OSPREY1x0;
break;
}
case 0x0014:
case 0x0015: {
btv->type = BTTV_OSPREY1x1;
break;
}
case 0x0016:
case 0x0017:
case 0x0020: {
btv->type = BTTV_OSPREY1x1_SVID;
break;
}
case 0x0018:
case 0x0019:
case 0x001E:
case 0x001F: {
btv->type = BTTV_OSPREY2xx;
break;
}
case 0x001A:
case 0x001B: {
btv->type = BTTV_OSPREY2x0_SVID;
break;
}
case 0x0060:
case 0x0070: {
btv->type = BTTV_OSPREY2x0;
//enable output on select control lines
btwrite(0x000303, BT848_GPIO_OUT_EN);
break;
}
default: {
/* unknown...leave as generic, but get a serial # */
break;
}
}

serial = (ee[offset+6] << 24)
| (ee[offset+7] << 16)
| (ee[offset+8] << 8)
| (ee[offset+9]);
}
}

if ((btv->type != detected_type) || (serial != 0)){
/* reprint which card config we are using */
sprintf(btv->video_dev.name,"BT%d%s(%.23s)",
btv->id,
(btv->id==848 && btv->revision==0x12) ? "A" : "",
bttv_tvcards[btv->type].name);
printk(KERN_INFO "bttv%d: is now:%s [card=%d,%s] Serial#: %ld\n",
btv->nr,
btv->video_dev.name,
btv->type,
(card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards) ?
"insmod option" : "autodetected",
serial);
}
}

/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from bktr_card.c */

int tuner_0_table[] = {
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
#if 0
int tuner_0_fm_table[] = {
PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
#endif

int tuner_1_table[] = {
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};

static void avermedia_eeprom(struct bttv *btv)
{
int tuner_make,tuner_tv_fm,tuner_format,tuner=0,remote;

tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
remote = (eeprom_data[0x42] & 0x01);

if (tuner_make == 0 || tuner_make == 2)
if(tuner_format <=9)
tuner = tuner_0_table[tuner_format];
if (tuner_make == 1)
if(tuner_format <=9)
tuner = tuner_1_table[tuner_format];

cprintf("[info ] bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
if(tuner) {
btv->tuner_type=tuner;
cprintf("%d",tuner);
} else
cprintf("Unknown type");
cprintf(" radio:%s remote control:%s\n",
tuner_tv_fm?"yes":"no",
remote?"yes":"no");
}

/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
{
// fix up our card entry
if(norm==VIDEO_MODE_NTSC) {
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
dprintk("bttv_tda9880_setnorm to NTSC\n");
}
else {
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
dprintk("bttv_tda9880_setnorm to PAL\n");
}
// set GPIO according
gpioaor(bttv_tvcards[btv->type].audiomux[btv->audio],
~bttv_tvcards[btv->type].gpiomask);
}

/*
* reset/enable the MSP on some Hauppauge cards
* Thanks to Kysti Mlkki (kmalkki@cc.hut.fi)!
*
* Hauppauge: pin 5
* Voodoo: pin 20
*/
static void boot_msp34xx(struct bttv *btv, int pin)
{
int mask = (1 << pin);

btor(mask, BT848_GPIO_OUT_EN);
gpioand(~mask);
udelay(2500);
gpioor(mask);
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");

if (bttv_verbose)
printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
"init [%d]\n", btv->nr, pin);
}

/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
/* This is basically the same procedure as
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */

static void init_PXC200(struct bttv *btv)
{
/* Initialise GPIO-connevted stuff */
btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
gpiowrite(0);
udelay(3);
gpiowrite(1<<13);
/* GPIO inputs are pulled up, so no need to drive
* reset pin any longer */
btwrite(0,BT848_GPIO_OUT_EN);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pxc200");

/* we could/should try and reset/control the AD pots? but
right now we simply turned off the crushing. Without
this the AGC drifts drifts
remember the EN is reverse logic -->
setting BT848_ADC_AGC_EN disable the AGC
tboult@eecs.lehigh.edu
*/
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);

/* Initialise MAX517 DAC */
printk(KERN_INFO "Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);

/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commmands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */

printk(KERN_INFO "PXC200 Initialised.\n");
}

/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
* This code is placed under the terms of the GNU General Public License
*
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
*/

#if 0
/* bus bits on the GPIO port */
#define TEA_WE 6
#define TEA_DATA 9
#define TEA_CLK 8
#define TEA_MOST 7
#endif

#define BUS_LOW(bit) gpioand(~(bit))
#define BUS_HIGH(bit) gpioor((bit))
#define BUS_IN(bit) (gpioread() & (bit))

/* TEA5757 register bits */
#define TEA_FREQ 0:14
#define TEA_BUFFER 15:15

#define TEA_SIGNAL_STRENGTH 16:17

#define TEA_PORT1 18:18
#define TEA_PORT0 19:19

#define TEA_BAND 20:21
#define TEA_BAND_FM 0
#define TEA_BAND_MW 1
#define TEA_BAND_LW 2
#define TEA_BAND_SW 3

#define TEA_MONO 22:22
#define TEA_ALLOW_STEREO 0
#define TEA_FORCE_MONO 1

#define TEA_SEARCH_DIRECTION 23:23
#define TEA_SEARCH_DOWN 0
#define TEA_SEARCH_UP 1

#define TEA_STATUS 24:24
#define TEA_STATUS_TUNED 0
#define TEA_STATUS_SEARCHING 1

/* ----------------------------------------------------------------------- */
/* winview */

void winview_audio(struct bttv *btv, struct video_audio *v, int set)
{
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
int bits_out, loops, vol, data;

if (!set) {
/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
v->flags |= VIDEO_AUDIO_VOLUME;
return;
}

/* 32 levels logarithmic */
vol = 32 - ((v->volume>>11));
/* units */
bits_out = (PT2254_DBS_IN_2>>(vol%5));
/* tens */
bits_out |= (PT2254_DBS_IN_10>>(vol/5));
bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
data = gpioread();
data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
WINVIEW_PT2254_STROBE);
for (loops = 17; loops >= 0 ; loops--) {
if (bits_out & (1<<loops))
data |= WINVIEW_PT2254_DATA;
else
data &= ~WINVIEW_PT2254_DATA;
gpiowrite(data);
udelay(5);
data |= WINVIEW_PT2254_CLK;
gpiowrite(data);
udelay(5);
data &= ~WINVIEW_PT2254_CLK;
gpiowrite(data);
}
data |= WINVIEW_PT2254_STROBE;
data &= ~WINVIEW_PT2254_DATA;
gpiowrite(data);
udelay(10);
data &= ~WINVIEW_PT2254_STROBE;
gpiowrite(data);
}

/* ----------------------------------------------------------------------- */
/* mono/stereo control for various cards (which don't use i2c chips but */
/* connect something to the GPIO pins */

static void
gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int con = 0;

if (set) {
btor(0x300, BT848_GPIO_OUT_EN);
if (v->mode & VIDEO_SOUND_LANG1)
con = 0x000;
if (v->mode & VIDEO_SOUND_LANG2)
con = 0x300;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x200;
// if (v->mode & VIDEO_SOUND_MONO)
// con = 0x100;
gpioaor(con, ~0x300);
} else {
v->mode = VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

/*
* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
* 0xdde enables mono and 0xccd enables sap
*
* Petr Vandrovec <VANDROVE@vc.cvut.cz>
* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
* input/output sound connection, so both must be set for output mode.
*
* Looks like it's needed only for the "tvphone", the "tvphone 98"
* handles this with a tda9840
*
*/
static void
avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
{
int val = 0;

if (set) {
if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
val = 0x02;
if (v->mode & VIDEO_SOUND_STEREO)
val = 0x01;
if (val) {
gpioaor(val, ~0x03);
if (bttv_gpio)
bttv_gpio_tracking(btv,"avermedia");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1;
return;
}
}

/* Lifetec 9415 handling */
static void
lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
{
int val = 0;

if (gpioread() & 0x4000) {
v->mode = VIDEO_SOUND_MONO;
return;
}

if (set) {
if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
val = 0x0080;
if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
val = 0x0880;
if ((v->mode & VIDEO_SOUND_LANG1) ||
(v->mode & VIDEO_SOUND_MONO))
val = 0;
gpioaor(val, ~0x0880);
if (bttv_gpio)
bttv_gpio_tracking(btv,"lt9415");
} else {
/* autodetect doesn't work with this card :-( */
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
return;
}
}

static void
terratv_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int con = 0;

if (set) {
btor(0x180000, BT848_GPIO_OUT_EN);
if (v->mode & VIDEO_SOUND_LANG2)
con = 0x080000;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x180000;
gpioaor(con, ~0x180000);
if (bttv_gpio)
bttv_gpio_tracking(btv,"terratv");
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

static void
winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned long val = 0;

if (set) {
/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
if (v->mode & VIDEO_SOUND_MONO) /* Mono */
val = 0x420000;
if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
val = 0x420000;
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
val = 0x410000;
if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
val = 0x020000;
if (val) {
gpioaor(val, ~0x430000);
if (bttv_gpio)
bttv_gpio_tracking(btv,"winfast2000");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
* revision 9B has on-board TDA9874A sound decoder).
*/
static void
pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int val = 0;

if (btv->radio)
return;

if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x01;
}
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|| (v->mode & VIDEO_SOUND_STEREO)) {
val = 0x02;
}
if (val) {
gpioaor(val, ~0x03);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pvbt878p9b");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for FlyVideo 2000S (with tda9874 decoder)
* based on pvbt878p9b_audio() - this is not tested, please fix!!!
*/
static void
fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int val = 0xffff;

if (btv->radio)
return;

if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x0000;
}
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|| (v->mode & VIDEO_SOUND_STEREO)) {
val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
}
if (val != 0xffff) {
gpioaor(val, ~0x1800);
if (bttv_gpio)
bttv_gpio_tracking(btv,"fv2000s");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

/*
* sound control for Canopus WinDVR PCI
* Masaki Suzuki <masaki@btree.org>
*/
static void
windvr_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned long val = 0;

if (set) {
if (v->mode & VIDEO_SOUND_MONO)
val = 0x040000;
if (v->mode & VIDEO_SOUND_LANG1)
val = 0;
if (v->mode & VIDEO_SOUND_LANG2)
val = 0x100000;
if (v->mode & VIDEO_SOUND_STEREO)
val = 0;
if (val) {
gpioaor(val, ~0x140000);
if (bttv_gpio)
bttv_gpio_tracking(btv,"windvr");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}

/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
*
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
* switch instead (CD22M3494E). This IC can have multiple active connections
* between Xn (input) and Yn (output) pins. We need to clear any existing
* connection prior to establish a new one, pulsing the STROBE pin.
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
* GPIO[8] - - P3[5] (microcontroler)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
* GPINTR - - P3[4] (microcontroler)
*
* The microcontroler is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroler
* which is also wired to I2C interface. I have no further info on the
* microcontroler features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
/* reset all conections */
gpioaor(0x200,~0x200);
udelay(1000);
gpioaor(0x000,~0x200);
udelay(1000);

/* create a new conection */
gpioaor(0x080,~0x480);
gpioaor(0x480,~0x480);
udelay(1000);
gpioaor(0x080,~0x480);
udelay(1000);
}

/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */

void bttv_check_chipset(void)
{
int pcipci_fail = 0;
struct pci_dev dev;
BYTE bus, dv;

triton1 = 0;
vsfx = 0;

if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, 0, &bus, &dv)) pcipci_fail = 1;
if (pci_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, 0, &bus, &dv)) pcipci_fail = 1;
if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, 0, &bus, &dv)) triton1 = 1;
if (pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, 0, &bus, &dv)) triton1 = 1;
if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, 0, &bus, &dv)) triton1 = 1;
if (pci_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, 0, &bus, &dv)) vsfx = 1;

/* print warnings about any quirks found */
if (triton1)
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
if (vsfx)
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");

if (pcipci_fail) {
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
if (-1 == no_overlay) {
printk(KERN_WARNING "bttv: going to disable overlay.\n");
no_overlay = 1;
}
}

if(pci_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, 0, &bus, &dv)) {
unsigned char b;
dev.bus->number = bus;
dev.devfn = dv;
pci_read_config_byte(&dev, 0x53, &b);
if (bttv_debug)
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
"bufcon=0x%02x\n",b);
}

}

int bttv_handle_chipset(struct bttv *btv)
{
unsigned char command;

if (!triton1 && !vsfx)
return 0;

if (bttv_verbose) {
if (triton1)
printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
if (vsfx && btv->id >= 878)
printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
}

if (btv->id < 878) {
/* bt848 (mis)uses a bit in the irq mask for etbf */
if (triton1)
btv->triton1 = BT848_INT_ETBF;
} else {
/* bt878 has a bit in the pci config space for it */
pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
if (triton1)
command |= BT878_EN_TBFX;
if (vsfx)
command |= BT878_EN_VSFX;
pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
}
return 0;
}

Subversion Repositories shark

(root)/shark/trunk/drivers/bttv/bttv-cards.c - Rev 272