Subversion Repositories shark

Rev

Blame | Last modification | View Log | RSS feed


/* $Id: mtd.h,v 1.1 2004-01-28 15:30:50 giacomo Exp $ */

#ifndef __MTD_MTD_H__
#define __MTD_MTD_H__

#ifdef __KERNEL__

#include <linux/config.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/uio.h>

#endif /* __KERNEL__ */

struct erase_info_user {
        u_int32_t start;
        u_int32_t length;
};

struct mtd_oob_buf {
        u_int32_t start;
        u_int32_t length;
        unsigned char *ptr;
};

#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
#define MAX_MTD_DEVICES 16



#define MTD_ABSENT              0
#define MTD_RAM                 1
#define MTD_ROM                 2
#define MTD_NORFLASH            3
#define MTD_NANDFLASH           4
#define MTD_PEROM               5
#define MTD_OTHER               14
#define MTD_UNKNOWN             15



#define MTD_CLEAR_BITS          1       // Bits can be cleared (flash)
#define MTD_SET_BITS            2       // Bits can be set
#define MTD_ERASEABLE           4       // Has an erase function
#define MTD_WRITEB_WRITEABLE    8       // Direct IO is possible
#define MTD_VOLATILE            16      // Set for RAMs
#define MTD_XIP                 32      // eXecute-In-Place possible
#define MTD_OOB                 64      // Out-of-band data (NAND flash)
#define MTD_ECC                 128     // Device capable of automatic ECC

// Some common devices / combinations of capabilities
#define MTD_CAP_ROM             0
#define MTD_CAP_RAM             (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
#define MTD_CAP_NORFLASH        (MTD_CLEAR_BITS|MTD_ERASEABLE)
#define MTD_CAP_NANDFLASH       (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
#define MTD_WRITEABLE           (MTD_CLEAR_BITS|MTD_SET_BITS)


// Types of automatic ECC/Checksum available
#define MTD_ECC_NONE            0       // No automatic ECC available
#define MTD_ECC_RS_DiskOnChip   1       // Automatic ECC on DiskOnChip
#define MTD_ECC_SW              2       // SW ECC for Toshiba & Samsung devices

struct mtd_info_user {
        u_char type;
        u_int32_t flags;
        u_int32_t size;  // Total size of the MTD
        u_int32_t erasesize;
        u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
        u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
        u_int32_t ecctype;
        u_int32_t eccsize;
};

struct region_info_user {
        u_int32_t offset;               /* At which this region starts,
                                         * from the beginning of the MTD */

        u_int32_t erasesize;            /* For this region */
        u_int32_t numblocks;            /* Number of blocks in this region */
        u_int32_t regionindex;
};

#define MEMGETINFO              _IOR('M', 1, struct mtd_info_user)
#define MEMERASE                _IOW('M', 2, struct erase_info_user)
#define MEMWRITEOOB             _IOWR('M', 3, struct mtd_oob_buf)
#define MEMREADOOB              _IOWR('M', 4, struct mtd_oob_buf)
#define MEMLOCK                 _IOW('M', 5, struct erase_info_user)
#define MEMUNLOCK               _IOW('M', 6, struct erase_info_user)
#define MEMGETREGIONCOUNT       _IOR('M', 7, int)
#define MEMGETREGIONINFO        _IOWR('M', 8, struct region_info_user)
#define MEMSETOOBSEL            _IOW('M', 9, struct nand_oobinfo)

struct nand_oobinfo {
        int     useecc;
        int     eccpos[6];     
};


#ifndef __KERNEL__

typedef struct mtd_info_user mtd_info_t;
typedef struct erase_info_user erase_info_t;
typedef struct region_info_user region_info_t;
typedef struct nand_oobinfo nand_oobinfo_t;

        /* User-space ioctl definitions */

#else /* __KERNEL__ */


#define MTD_ERASE_PENDING       0x01
#define MTD_ERASING             0x02
#define MTD_ERASE_SUSPEND       0x04
#define MTD_ERASE_DONE          0x08
#define MTD_ERASE_FAILED        0x10

struct erase_info {
        struct mtd_info *mtd;
        u_int32_t addr;
        u_int32_t len;
        u_long time;
        u_long retries;
        u_int dev;
        u_int cell;
        void (*callback) (struct erase_info *self);
        u_long priv;
        u_char state;
        struct erase_info *next;
};

struct mtd_erase_region_info {
        u_int32_t offset;                       /* At which this region starts, from the beginning of the MTD */
        u_int32_t erasesize;            /* For this region */
        u_int32_t numblocks;            /* Number of blocks of erasesize in this region */
};

struct mtd_info {
        u_char type;
        u_int32_t flags;
        u_int32_t size;  // Total size of the MTD

        /* "Major" erase size for the device. Naïve users may take this
         * to be the only erase size available, or may use the more detailed
         * information below if they desire
         */

        u_int32_t erasesize;

        u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
        u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
        u_int32_t ecctype;
        u_int32_t eccsize;
       

        // Kernel-only stuff starts here.
        char *name;
        int index;

        // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
        struct nand_oobinfo oobinfo;

        /* Data for variable erase regions. If numeraseregions is zero,
         * it means that the whole device has erasesize as given above.
         */

        int numeraseregions;
        struct mtd_erase_region_info *eraseregions;

        /* This really shouldn't be here. It can go away in 2.5 */
        u_int32_t bank_size;

        int (*erase) (struct mtd_info *mtd, struct erase_info *instr);

        /* This stuff for eXecute-In-Place */
        int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);

        /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
        void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);


        int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
        int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);

        int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
        int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);

        int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
        int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);

        /*
         * Methods to access the protection register area, present in some
         * flash devices. The user data is one time programmable but the
         * factory data is read only.
         */

        int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);

        int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);

        /* This function is not yet implemented */
        int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);

        /* iovec-based read/write methods. We need these especially for NAND flash,
           with its limited number of write cycles per erase.
           NB: The 'count' parameter is the number of _vectors_, each of
           which contains an (ofs, len) tuple.
        */

        int (*readv) (struct mtd_info *mtd, struct iovec *vecs, unsigned long count, loff_t from, size_t *retlen);
        int (*readv_ecc) (struct mtd_info *mtd, struct iovec *vecs, unsigned long count, loff_t from,
                size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
        int (*writev) (struct mtd_info *mtd, const struct iovec *vecs, unsigned long count, loff_t to, size_t *retlen);
        int (*writev_ecc) (struct mtd_info *mtd, const struct iovec *vecs, unsigned long count, loff_t to,
                size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);

        /* Sync */
        void (*sync) (struct mtd_info *mtd);

        /* Chip-supported device locking */
        int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
        int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);

        /* Power Management functions */
        int (*suspend) (struct mtd_info *mtd);
        void (*resume) (struct mtd_info *mtd);

        void *priv;

        struct module *owner;
        int usecount;
};


        /* Kernel-side ioctl definitions */

extern int add_mtd_device(struct mtd_info *mtd);
extern int del_mtd_device (struct mtd_info *mtd);

extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);

extern void put_mtd_device(struct mtd_info *mtd);


struct mtd_notifier {
        void (*add)(struct mtd_info *mtd);
        void (*remove)(struct mtd_info *mtd);
        struct list_head list;
};


extern void register_mtd_user (struct mtd_notifier *new);
extern int unregister_mtd_user (struct mtd_notifier *old);

int default_mtd_writev(struct mtd_info *mtd, const struct iovec *vecs,
                       unsigned long count, loff_t to, size_t *retlen);

int default_mtd_readv(struct mtd_info *mtd, struct iovec *vecs,
                      unsigned long count, loff_t from, size_t *retlen);

#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0)

/*
 * Debugging macro and defines
 */

#define MTD_DEBUG_LEVEL0        (0)     /* Quiet   */
#define MTD_DEBUG_LEVEL1        (1)     /* Audible */
#define MTD_DEBUG_LEVEL2        (2)     /* Loud    */
#define MTD_DEBUG_LEVEL3        (3)     /* Noisy   */

#ifdef CONFIG_MTD_DEBUG
#define DEBUG(n, args...)                               \
        do {                                            \
                if (n <= CONFIG_MTD_DEBUG_VERBOSE)      \
                        printk(KERN_INFO args);         \
        } while(0)

#else /* CONFIG_MTD_DEBUG */
#define DEBUG(n, args...) do { } while(0)

#endif /* CONFIG_MTD_DEBUG */

#endif /* __KERNEL__ */

#endif /* __MTD_MTD_H__ */