Blame |
Last modification |
View Log
| RSS feed
/*
* linux/drivers/video/sstfb.h -- voodoo graphics frame buffer
*
* Copyright (c) 2000,2001 Ghozlane Toumi <gtoumi@messel.emse.fr>
*
* Created 28 Aug 2001 by Ghozlane Toumi
*/
#ifndef _SSTFB_H_
#define _SSTFB_H_
/*
*
* Debug Stuff
*
*/
#ifdef SST_DEBUG
# define dprintk(X...) printk("sstfb: " X)
#else
# define dprintk(X...)
# undef SST_DEBUG_REG
# undef SST_DEBUG_FUNC
# undef SST_DEBUG_VAR
#endif
#if (SST_DEBUG_REG > 0)
# define r_dprintk(X...) dprintk(X)
#else
# define r_dprintk(X...)
#endif
#if (SST_DEBUG_REG > 1)
# define r_ddprintk(X...) dprintk(" " X)
#else
# define r_ddprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 0)
# define f_dprintk(X...) dprintk(X)
#else
# define f_dprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 1)
# define f_ddprintk(X...) dprintk(" " X)
#else
# define f_ddprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 2)
# define f_dddprintk(X...) dprintk(" " X)
#else
# define f_dddprintk(X...)
#endif
#if (SST_DEBUG_VAR > 0)
# define v_dprintk(X...) dprintk(X)
# define print_var(V, X...) \
{ \
dprintk(X); \
printk(" :\n"); \
sst_dbg_print_var(V); \
}
#else
# define v_dprintk(X...)
# define print_var(X,Y...)
#endif
#define eprintk(X...) printk(KERN_ERR "sstfb: " X)
#define iprintk(X...) printk(KERN_INFO "sstfb: " X)
#define wprintk(X...) printk(KERN_WARNING "sstfb: " X)
#define BIT(x) (1ul<<(x))
#define POW2(x) (1ul<<(x))
#ifndef ABS
# define ABS(x) (((x)<0)?-(x):(x))
#endif
/*
*
* Const
*
*/
/* pci stuff */
#define PCI_INIT_ENABLE 0x40
# define PCI_EN_INIT_WR BIT(0)
# define PCI_EN_FIFO_WR BIT(1)
# define PCI_REMAP_DAC BIT(2)
#define PCI_VCLK_ENABLE 0xc0 /* enable video */
#define PCI_VCLK_DISABLE 0xe0
/* register offsets from memBaseAddr */
#define STATUS 0x0000
# define STATUS_FBI_BUSY BIT(7)
#define FBZMODE 0x0110
# define EN_CLIPPING BIT(0) /* enable clipping */
# define EN_RGB_WRITE BIT(9) /* enable writes to rgb area */
# define EN_ALPHA_WRITE BIT(10)
# define ENGINE_INVERT_Y BIT(17) /* invert Y origin (pipe) */
#define LFBMODE 0x0114
# define LFB_565 0 /* bits 3:0 .16 bits RGB */
# define LFB_888 4 /* 24 bits RGB */
# define LFB_8888 5 /* 32 bits ARGB */
# define WR_BUFF_FRONT 0 /* write buf select (front) */
# define WR_BUFF_BACK (1 << 4) /* back */
# define RD_BUFF_FRONT 0 /* read buff select (front) */
# define RD_BUFF_BACK (1 << 6) /* back */
# define EN_PXL_PIPELINE BIT(8) /* pixel pipeline (clip..)*/
# define LFB_WORD_SWIZZLE_WR BIT(11) /* enable write-wordswap (big-endian) */
# define LFB_BYTE_SWIZZLE_WR BIT(12) /* enable write-byteswap (big-endian) */
# define LFB_INVERT_Y BIT(13) /* invert Y origin (LFB) */
# define LFB_WORD_SWIZZLE_RD BIT(15) /* enable read-wordswap (big-endian) */
# define LFB_BYTE_SWIZZLE_RD BIT(16) /* enable read-byteswap (big-endian) */
#define CLIP_LEFT_RIGHT 0x0118
#define CLIP_LOWY_HIGHY 0x011c
#define NOPCMD 0x0120
#define FASTFILLCMD 0x0124
#define SWAPBUFFCMD 0x0128
#define FBIINIT4 0x0200 /* misc controls */
# define FAST_PCI_READS 0 /* 1 waitstate */
# define SLOW_PCI_READS BIT(0) /* 2 ws */
# define LFB_READ_AHEAD BIT(1)
#define BACKPORCH 0x0208
#define VIDEODIMENSIONS 0x020c
#define FBIINIT0 0x0210 /* misc+fifo controls */
# define EN_VGA_PASSTHROUGH BIT(0)
# define FBI_RESET BIT(1)
# define FIFO_RESET BIT(2)
#define FBIINIT1 0x0214 /* PCI + video controls */
# define VIDEO_MASK 0x8080010f /* masks video related bits V1+V2*/
# define FAST_PCI_WRITES 0 /* 0 ws */
# define SLOW_PCI_WRITES BIT(1) /* 1 ws */
# define EN_LFB_READ BIT(3)
# define TILES_IN_X_SHIFT 4
# define VIDEO_RESET BIT(8)
# define EN_BLANKING BIT(12)
# define EN_DATA_OE BIT(13)
# define EN_BLANK_OE BIT(14)
# define EN_HVSYNC_OE BIT(15)
# define EN_DCLK_OE BIT(16)
# define SEL_INPUT_VCLK_2X 0 /* bit 17 */
# define SEL_INPUT_VCLK_SLAVE BIT(17)
# define SEL_SOURCE_VCLK_SLAVE 0 /* bits 21:20 */
# define SEL_SOURCE_VCLK_2X_DIV2 (0x01 << 20)
# define SEL_SOURCE_VCLK_2X_SEL (0x02 << 20)
# define EN_24BPP BIT(22)
# define TILES_IN_X_MSB_SHIFT 24 /* v2 */
# define VCLK_2X_SEL_DEL_SHIFT 27 /* vclk out delay 0,4,6,8ns */
# define VCLK_DEL_SHIFT 29 /* vclk in delay */
#define FBIINIT2 0x0218 /* Dram controls */
# define EN_FAST_RAS_READ BIT(5)
# define EN_DRAM_OE BIT(6)
# define EN_FAST_RD_AHEAD_WR BIT(7)
# define VIDEO_OFFSET_SHIFT 11 /* unit: #rows tile 64x16/2 */
# define SWAP_DACVSYNC 0
# define SWAP_DACDATA0 (1 << 9)
# define SWAP_FIFO_STALL (2 << 9)
# define EN_RD_AHEAD_FIFO BIT(21)
# define EN_DRAM_REFRESH BIT(22)
# define DRAM_REFRESH_16 (0x30 << 23) /* dram 16 ms */
#define DAC_READ FBIINIT2 /* in remap mode */
#define FBIINIT3 0x021c /* fbi controls */
# define DISABLE_TEXTURE BIT(6)
# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap substraction value */
#define HSYNC 0x0220
#define VSYNC 0x0224
#define DAC_DATA 0x022c
# define DAC_READ_CMD BIT(11) /* set read dacreg mode */
#define FBIINIT5 0x0244 /* v2 specific */
# define FBIINIT5_MASK 0xfa40ffff /* mask video bits*/
# define HDOUBLESCAN BIT(20)
# define VDOUBLESCAN BIT(21)
# define HSYNC_HIGH BIT(23)
# define VSYNC_HIGH BIT(24)
# define INTERLACE BIT(26)
#define FBIINIT6 0x0248 /* v2 specific */
# define TILES_IN_X_LSB_SHIFT 30 /* v2 */
#define FBIINIT7 0x024c /* v2 specific */
#define BLTSRCBASEADDR 0x02c0 /* BitBLT Source base address */
#define BLTDSTBASEADDR 0x02c4 /* BitBLT Destination base address */
#define BLTXYSTRIDES 0x02c8 /* BitBLT Source and Destination strides */
#define BLTSRCCHROMARANGE 0x02cc /* BitBLT Source Chroma key range */
#define BLTDSTCHROMARANGE 0x02d0 /* BitBLT Destination Chroma key range */
#define BLTCLIPX 0x02d4 /* BitBLT Min/Max X clip values */
#define BLTCLIPY 0x02d8 /* BitBLT Min/Max Y clip values */
#define BLTSRCXY 0x02e0 /* BitBLT Source starting XY coordinates */
#define BLTDSTXY 0x02e4 /* BitBLT Destination starting XY coordinates */
#define BLTSIZE 0x02e8 /* BitBLT width and height */
#define BLTROP 0x02ec /* BitBLT Raster operations */
# define BLTROP_COPY 0x0cccc
# define BLTROP_INVERT 0x05555
# define BLTROP_XOR 0x06666
#define BLTCOLOR 0x02f0 /* BitBLT and foreground background colors */
#define BLTCOMMAND 0x02f8 /* BitBLT command mode (v2 specific) */
# define BLT_SCR2SCR_BITBLT 0 /* Screen-to-Screen BitBLT */
# define BLT_CPU2SCR_BITBLT 1 /* CPU-to-screen BitBLT */
# define BLT_RECFILL_BITBLT 2 /* BitBLT Rectangle Fill */
# define BLT_16BPP_FMT 2 /* 16 BPP (5-6-5 RGB) */
#define BLTDATA 0x02fc /* BitBLT data for CPU-to-Screen BitBLTs */
# define LAUNCH_BITBLT BIT(31) /* Launch BitBLT in BltCommand, bltDstXY or bltSize */
/* Dac Registers */
#define DACREG_WMA 0x0 /* pixel write mode address */
#define DACREG_LUT 0x01 /* color value */
#define DACREG_RMR 0x02 /* pixel mask */
#define DACREG_RMA 0x03 /* pixel read mode address */
/*Dac registers in indexed mode (TI, ATT dacs) */
#define DACREG_ADDR_I DACREG_WMA
#define DACREG_DATA_I DACREG_RMR
#define DACREG_RMR_I 0x00
#define DACREG_CR0_I 0x01
# define DACREG_CR0_EN_INDEXED BIT(0) /* enable indexec mode */
# define DACREG_CR0_8BIT BIT(1) /* set dac to 8 bits/read */
# define DACREG_CR0_PWDOWN BIT(3) /* powerdown dac */
# define DACREG_CR0_16BPP 0x30 /* mode 3 */
# define DACREG_CR0_24BPP 0x50 /* mode 5 */
#define DACREG_CR1_I 0x05
#define DACREG_CC_I 0x06
# define DACREG_CC_CLKA BIT(7) /* clk A controled by regs */
# define DACREG_CC_CLKA_C (2<<4) /* clk A uses reg C */
# define DACREG_CC_CLKB BIT(3) /* clk B controled by regs */
# define DACREG_CC_CLKB_D 3 /* clkB uses reg D */
#define DACREG_AC0_I 0x48 /* clock A reg C */
#define DACREG_AC1_I 0x49
#define DACREG_BD0_I 0x6c /* clock B reg D */
#define DACREG_BD1_I 0x6d
/* identification constants */
#define DACREG_MIR_TI 0x97
#define DACREG_DIR_TI 0x09
#define DACREG_MIR_ATT 0x84
#define DACREG_DIR_ATT 0x09
/* ics dac specific registers */
#define DACREG_ICS_PLLWMA 0x04 /* PLL write mode address */
#define DACREG_ICS_PLLDATA 0x05 /* PLL data /parameter */
#define DACREG_ICS_CMD 0x06 /* command */
# define DACREG_ICS_CMD_16BPP 0x50 /* ics color mode 6 (16bpp bypass)*/
# define DACREG_ICS_CMD_24BPP 0x70 /* ics color mode 7 (24bpp bypass)*/
# define DACREG_ICS_CMD_PWDOWN BIT(0) /* powerdown dac */
#define DACREG_ICS_PLLRMA 0x07 /* PLL read mode address */
/*
* pll parameter register:
* indexed : write addr to PLLWMA, write data in PLLDATA.
* for reads use PLLRMA .
* 8 freq registers (0-7) for video clock (CLK0)
* 2 freq registers (a-b) for graphic clock (CLK1)
*/
#define DACREG_ICS_PLL_CLK0_1_INI 0x55 /* initial pll M value for freq f1 */
#define DACREG_ICS_PLL_CLK0_7_INI 0x71 /* f7 */
#define DACREG_ICS_PLL_CLK1_B_INI 0x79 /* fb */
#define DACREG_ICS_PLL_CTRL 0x0e
# define DACREG_ICS_CLK0 BIT(5)
# define DACREG_ICS_CLK0_0 0
# define DACREG_ICS_CLK1_A 0 /* bit4 */
/* sst default init registers */
#define FBIINIT0_DEFAULT EN_VGA_PASSTHROUGH
#define FBIINIT1_DEFAULT \
( \
FAST_PCI_WRITES \
/* SLOW_PCI_WRITES*/ \
| VIDEO_RESET \
| 10 << TILES_IN_X_SHIFT\
| SEL_SOURCE_VCLK_2X_SEL\
| EN_LFB_READ \
)
#define FBIINIT2_DEFAULT \
( \
SWAP_DACVSYNC \
| EN_DRAM_OE \
| DRAM_REFRESH_16 \
| EN_DRAM_REFRESH \
| EN_FAST_RAS_READ \
| EN_RD_AHEAD_FIFO \
| EN_FAST_RD_AHEAD_WR \
)
#define FBIINIT3_DEFAULT \
( DISABLE_TEXTURE )
#define FBIINIT4_DEFAULT \
( \
FAST_PCI_READS \
/* SLOW_PCI_READS*/ \
| LFB_READ_AHEAD \
)
/* Careful with this one : writing back the data just read will trash the DAC
reading some fields give logic value on pins, but setting this field will
set the source signal driving the pin. conclusion : just use the default
as a base before writing back .
*/
#define FBIINIT6_DEFAULT (0x0)
/*
*
* Misc Const
*
*/
/* used to know witch clock to set */
enum {
VID_CLOCK=0,
GFX_CLOCK=1,
};
/* freq max */
#define DAC_FREF 14318 /* DAC reference freq (Khz) */
#define VCO_MAX 260000
/*
* driver structs
*/
struct pll_timing {
unsigned int m;
unsigned int n;
unsigned int p;
};
struct dac_switch {
char * name;
int (*detect) (struct fb_info *info);
int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock);
void (*set_vidmod) (struct fb_info *info, const int bpp);
};
struct sst_spec {
char * name;
int default_gfx_clock; /* 50000 for voodoo1, 75000 for voodoo2 */
int max_gfxclk; /* ! in Mhz ie 60 for voodoo 1 */
};
struct sstfb_par {
unsigned int yDim;
unsigned int hSyncOn; /* hsync_len */
unsigned int hSyncOff; /* left_margin + xres + right_margin */
unsigned int hBackPorch;/* left_margin */
unsigned int vSyncOn;
unsigned int vSyncOff;
unsigned int vBackPorch;
struct pll_timing pll;
unsigned int tiles_in_X;/* num of tiles in X res */
unsigned long mmio_vbase;
struct dac_switch dac_sw; /* dac specific functions */
struct pci_dev *dev;
int type;
u8 revision;
int gfx_clock; /* status */
};
#endif /* _SSTFB_H_ */