Blame |
Last modification |
View Log
| RSS feed
/*
* Project: S.Ha.R.K.
*
* Coordinators:
* Giorgio Buttazzo <giorgio@sssup.it>
* Paolo Gai <pj@gandalf.sssup.it>
*
* Authors :
* Paolo Gai <pj@gandalf.sssup.it>
* Massimiliano Giorgi <massy@gandalf.sssup.it>
* Luca Abeni <luca@gandalf.sssup.it>
* (see the web pages for full authors list)
*
* ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
*
* http://www.sssup.it
* http://retis.sssup.it
* http://shark.sssup.it
*/
/**
------------
CVS : $Id: rtc.c,v 1.1 2003-03-24 10:54:17 pj Exp $
File: $File$
Revision: $Revision: 1.1 $
Last update: $Date: 2003-03-24 10:54:17 $
------------
Author: Massimiliano Giorgi
A source from Linux 2.2.9 modified to work with S.Ha.R.K.
**/
/*
* Copyright (C) 2000 Paolo Gai
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
/*
* Real Time Clock interface for Linux
*
* Copyright (C) 1996 Paul Gortmaker
*
* This driver allows use of the real time clock (built into
* nearly all computers) from user space. It exports the /dev/rtc
* interface supporting various ioctl() and also the /proc/rtc
* pseudo-file for status information.
*
* The ioctls can be used to set the interrupt behaviour and
* generation rate from the RTC via IRQ 8. Then the /dev/rtc
* interface can be used to make use of these timer interrupts,
* be they interval or alarm based.
*
* The /dev/rtc interface will block on reads until an interrupt
* has been received. If a RTC interrupt has already happened,
* it will output an unsigned long and then block. The output value
* contains the interrupt status in the low byte and the number of
* interrupts since the last read in the remaining high bytes. The
* /dev/rtc interface can also be used with the select(2) call.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Based on other minimal char device drivers, like Alan's
* watchdog, Ted's random, etc. etc.
*
* 1.07 Paul Gortmaker.
* 1.08 Miquel van Smoorenburg: disallow certain things on the
* DEC Alpha as the CMOS clock is also used for other things.
* 1.09 Nikita Schmidt: epoch support and some Alpha cleanup.
*
*/
#define RTC_VERSION "1.09"
#define RTC_IRQ 8 /* Can't see this changing soon. */
#define RTC_IO_EXTENT 0x10 /* Only really two ports, but... */
/*
* Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
* interrupts disabled. Due to the index-port/data-port (0x70/0x71)
* design of the RTC, we don't want two different things trying to
* get to it at once. (e.g. the periodic 11 min sync from time.c vs.
* this driver.)
*/
#include <kernel/kern.h>
#include <drivers/rtc.h>
#include "_rtc.h"
/*
#define CMOS_READ(addr) ({ \
outb_p((addr),RTC_PORT(0)); \
inb_p(RTC_PORT(1)); \
})
#define CMOS_WRITE(val, addr) ({ \
outb_p((addr),RTC_PORT(0)); \
outb_p((val),RTC_PORT(1)); \
})
*/
#define CMOS_READ(addr) ( \
ll_out(RTC_PORT(0),addr), \
ll_in(RTC_PORT(1)) \
)
#define CMOS_WRITE(val, addr) (\
ll_out(RTC_PORT(0),addr), \
ll_out(RTC_PORT(1),val) \
)
/*
* We sponge a minor off of the misc major. No need slurping
* up another valuable major dev number for this. If you add
* an ioctl, make sure you don't conflict with SPARC's RTC
* ioctls.
*/
int get_rtc_time (struct rtc_time *rtc_tm);
int set_rtc_time (struct rtc_time *rtc_tm);
int get_rtc_alm_time (struct rtc_time *alm_tm);
void set_rtc_irq_bit(unsigned char bit);
void mask_rtc_irq_bit(unsigned char bit);
static inline unsigned char rtc_is_updating(void);
/*
* Bits in rtc_status. (6 bits of room for future expansion)
*/
#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
#define RTC_TIMER_ON 0x02 /* missed irq timer active */
unsigned char rtc_status = 0; /* bitmapped status byte. */
unsigned long rtc_freq = 0; /* Current periodic IRQ rate */
unsigned long rtc_irq_data = 0; /* our output to the world */
/*
* If this driver ever becomes modularised, it will be really nice
* to make the epoch retain its value across module reload...
*/
static unsigned long epoch = 1900; /* year corresponding to 0x00 */
unsigned char days_in_mo[] =
{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
/*
* Returns true if a clock update is in progress
*/
static inline unsigned char rtc_is_updating(void)
{
SYS_FLAGS flags;
unsigned char uip;
flags=kern_fsave();
uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
kern_frestore(flags);
return uip;
}
int get_rtc_time(struct rtc_time *rtc_tm)
{
SYS_FLAGS flags;
unsigned char ctrl;
unsigned retries=0;
struct timespec delay;
/*
* read RTC once any update in progress is done. The update
* can take just over 2ms. We wait 10 to 20ms. There is no need to
* to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
* If you need to know *exactly* when a second has started, enable
* periodic update complete interrupts, (via ioctl) and then
* immediately read /dev/rtc which will block until you get the IRQ.
* Once the read clears, read the RTC time (again via ioctl). Easy.
*/
/*
if (rtc_is_updating() != 0)
while (jiffies - uip_watchdog < 2*HZ/100)
barrier();
*/
delay.tv_nsec = 1000000;
delay.tv_sec = 0;
while (rtc_is_updating()&&++retries<=5) nanosleep(&delay, NULL);
if (retries>5) return -1;
/*
* Only the values that we read from the RTC are set. We leave
* tm_wday, tm_yday and tm_isdst untouched. Even though the
* RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
* by the RTC when initially set to a non-zero value.
*/
flags=kern_fsave();
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
ctrl = CMOS_READ(RTC_CONTROL);
kern_frestore(flags);
if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
{
BCD_TO_BIN(rtc_tm->tm_sec);
BCD_TO_BIN(rtc_tm->tm_min);
BCD_TO_BIN(rtc_tm->tm_hour);
BCD_TO_BIN(rtc_tm->tm_mday);
BCD_TO_BIN(rtc_tm->tm_mon);
BCD_TO_BIN(rtc_tm->tm_year);
}
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
if ((rtc_tm->tm_year += (epoch - 1900)) <= 69)
rtc_tm->tm_year += 100;
rtc_tm->tm_mon--;
return 0;
}
int set_rtc_time(struct rtc_time *rtc_tm)
{
unsigned char mon, day, hrs, min, sec, leap_yr;
unsigned char save_control, save_freq_select;
unsigned int yrs;
SYS_FLAGS flags;
yrs = rtc_tm->tm_year + 1900;
mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */
day = rtc_tm->tm_mday;
hrs = rtc_tm->tm_hour;
min = rtc_tm->tm_min;
sec = rtc_tm->tm_sec;
if (yrs < 1970)
return -EINVAL;
leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
if ((mon > 12) || (day == 0))
return -EINVAL;
if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
return -EINVAL;
if ((hrs >= 24) || (min >= 60) || (sec >= 60))
return -EINVAL;
if ((yrs -= epoch) > 255) /* They are unsigned */
return -EINVAL;
flags=kern_fsave();
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
|| RTC_ALWAYS_BCD) {
if (yrs > 169) {
kern_frestore(flags);
return -EINVAL;
}
if (yrs >= 100)
yrs -= 100;
BIN_TO_BCD(sec);
BIN_TO_BCD(min);
BIN_TO_BCD(hrs);
BIN_TO_BCD(day);
BIN_TO_BCD(mon);
BIN_TO_BCD(yrs);
}
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
CMOS_WRITE(yrs, RTC_YEAR);
CMOS_WRITE(mon, RTC_MONTH);
CMOS_WRITE(day, RTC_DAY_OF_MONTH);
CMOS_WRITE(hrs, RTC_HOURS);
CMOS_WRITE(min, RTC_MINUTES);
CMOS_WRITE(sec, RTC_SECONDS);
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
kern_frestore(flags);
return 0;
}
int get_rtc_alm_time(struct rtc_time *alm_tm)
{
SYS_FLAGS flags;
unsigned char ctrl;
/*
* Only the values that we read from the RTC are set. That
* means only tm_hour, tm_min, and tm_sec.
*/
flags=kern_fsave();
alm_tm->tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
alm_tm->tm_min = CMOS_READ(RTC_MINUTES_ALARM);
alm_tm->tm_hour = CMOS_READ(RTC_HOURS_ALARM);
ctrl = CMOS_READ(RTC_CONTROL);
kern_frestore(flags);
if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
{
BCD_TO_BIN(alm_tm->tm_sec);
BCD_TO_BIN(alm_tm->tm_min);
BCD_TO_BIN(alm_tm->tm_hour);
}
return 0;
}
/*
* Used to disable/enable interrupts for any one of UIE, AIE, PIE.
* Rumour has it that if you frob the interrupt enable/disable
* bits in RTC_CONTROL, you should read RTC_INTR_FLAGS, to
* ensure you actually start getting interrupts. Probably for
* compatibility with older/broken chipset RTC implementations.
* We also clear out any old irq data after an ioctl() that
* meddles with the interrupt enable/disable bits.
*/
void mask_rtc_irq_bit(unsigned char bit)
{
unsigned char val;
SYS_FLAGS flags;
flags=kern_fsave();
//cli();
val = CMOS_READ(RTC_CONTROL);
val &= ~bit;
CMOS_WRITE(val, RTC_CONTROL);
CMOS_READ(RTC_INTR_FLAGS);
kern_frestore(flags);
//rtc_irq_data = 0;
}
void set_rtc_irq_bit(unsigned char bit)
{
unsigned char val;
SYS_FLAGS flags;
flags=kern_fsave();
//cli();
val = CMOS_READ(RTC_CONTROL);
val |= bit;
CMOS_WRITE(val, RTC_CONTROL);
CMOS_READ(RTC_INTR_FLAGS);
//rtc_irq_data = 0;
kern_frestore(flags);
}
/* added by Massy */
/* to find the date in seconds from the Epoch (1 Gen 1970 00:00 GMT) */
/* (modifing a source from Linux) */
static int day_n[]={
0,31,59,90,120,151,181,212,243,273,304,334,0,0,0,0
};
time_t sys_getdate(void)
{
struct rtc_time rtc;
time_t secs;
get_rtc_time (&rtc);
secs = rtc.tm_sec+60l*rtc.tm_min+rtc.tm_hour*3600l+86400l*
(rtc.tm_mday-1+day_n[rtc.tm_mon]+(rtc.tm_year/4l)
+rtc.tm_year*365l-
((rtc.tm_year & 3) == 0 && rtc.tm_mon < 2 ? 1 : 0)+3653l);
/* days since 1.1.70 plus 80's leap day */
/*secs += sys_tz.tz_minuteswest*60;*/
/*if (sys_tz.tz_dsttime) secs -= 3600;*/
return secs;
}