WebSVN - shark - Rev 20 - /shark/trunk/drivers/parport/ppnrtdrv.c

/*
*
* Project:
* Parallel Port S.Ha.R.K. Project
*
* Module:
* ppNRTDrv.c
*
* Description:
* file contents description
*
* Coordinators:
* Giorgio Buttazzo <giorgio@sssup.it>
* Paolo Gai <pj@gandalf.sssup.it>
*
* Authors:
* Andrea Battistotti <btandrea@libero.it>
* Armando Leggio <a_leggio@hotmail.com>
*
*
* http://www.sssup.it
* http://retis.sssup.it
* http://shark.sssup.it
*
*/

/*************************************************************************
* Module : ppNRTDrv.c
* Author : Andrea Battistotti , Armando Leggio
* Description: Set On/Off single pin of LPT1...
* 2002 @ Pavia - GNU Copyrights
*******************************************************************************************/

/*
* Copyright (C) 2002 Andrea Battistotti , Armando Leggio
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* CVS : $Id: ppnrtdrv.c,v 1.1 2002-10-28 08:03:54 pj Exp $
*/

/*******************************************************************************************
* A standard PC provides for three printer ports, at the following base addresses:
*
* LPT1 = 0x0378 or 0x03BC
* LPT2 = 0x0278 or 0x0378
* LPT3 = 0x0278
*
* This module assumes that LPT1 is at 0x0378.
*
* The printer port has three 8-bit registers:
*
* Data Register (base + 0) ........ outputs
*
* 7 6 5 4 3 2 1 0
* . . . . . . . * D0 ........... (pin 2), 1=High, 0=Low (true)
* . . . . . . * . D1 ........... (pin 3), 1=High, 0=Low (true)
* . . . . . * . . D2 ........... (pin 4), 1=High, 0=Low (true)
* . . . . * . . . D3 ........... (pin 5), 1=High, 0=Low (true)
* . . . * . . . . D4 ........... (pin 6), 1=High, 0=Low (true)
* . . * . . . . . D5 ........... (pin 7), 1=High, 0=Low (true)
* . * . . . . . . D6 ........... (pin 8), 1=High, 0=Low (true)
* * . . . . . . . D7 ........... (pin 9), 1=High, 0=Low (true)
*
* Status Register (base + 1) ...... inputs
*
* 7 6 5 4 3 2 1 0
* . . . . . * * * Undefined
* . . . . * . . . Error ........ (pin 15), high=1, low=0 (true)
* . . . * . . . . Selected ..... (pin 13), high=1, low=0 (true)
* . . * . . . . . No paper ..... (pin 12), high=1, low=0 (true)
* . * . . . . . . Ack .......... (pin 10), high=1, low=0 (true)
* * . . . . . . . Busy ......... (pin 11), high=0, low=1 (inverted)
*
* Control Register (base + 2) ..... outputs
*
* 7 6 5 4 3 2 1 0
* . . . . . . . * Strobe ....... (pin 1), 1=low, 0=high (inverted)
* . . . . . . * . Auto Feed .... (pin 14), 1=low, 0=high (inverted)
* . . . . . * . . Initialize ... (pin 16), 1=high, 0=low (true)
* . . . . * . . . Select ....... (pin 17), 1=low, 0=high (inverted)
* * * * * . . . . Unused
*
* Pins 18-25 are ground.
********************************************************************************************/

#include <drivers/parport.h>

/*************************************************************************/
BOOL ppNRTWaitRTS(void)
{
BYTE port;
TIME start = clock();
do
{
port = ~inp(RX_PORT); /* port status */
port = port & RX_CTR; /* test cntr read bit*/
if(clock() > start + CLK_TIMEOUT) return TIMEOUT;
} while(port == 0);
return TRUE;
}

/*************************************************************************/
BOOL ppNRTWaitDR(void)
{
BYTE port;
TIME start = clock(); /* start */
do {
port = (~inp(RX_PORT)) | (~RX_CTR); /* test cntr read bit*/
if(clock() > start + CLK_TIMEOUT) return TIMEOUT;
} while(port != 0x7F); /* 0111 1111 */

return TRUE;
}

/*************************************************************************/
BOOL ppNRTWaitOTS(void)
{
BYTE port;
TIME start = clock(); /* start time */
do
{
port = ~inp(RX_PORT); /* read port status */
port = port & RX_CTR; /* test cntr read bit*/
if(clock() > start + CLK_TIMEOUT) return TIMEOUT;
} while(port == 0);
return TRUE;
}

/*************************************************************************/
BOOL ppNRTWaitER(void)
{
BYTE port;
TIME start = clock(); /* start */
do
{
port = ~inp(RX_PORT); /* read port status */
port = port | (~RX_CTR); /* test cntr read bit*/
if(clock() > start + CLK_TIMEOUT) return TIMEOUT;
} while(port != 0x7F); /* 0111 1111 */
return TRUE;
}

/**************************************************************************/
BOOL ppNRTTxOneByte(BYTE c)
{
BYTE port;
/*------------------------- Least Significative Nibble */
ppSendRTS(); /* Request To Send */

port = inp(TX_PORT); /* read port status */
port = port & (~TX_DATA); /* set tx bits == 0 */
port = port | (c & LSN); /* set bit 0..3 with LSN */

#if PP_DEBUG == 1
kern_printf("ppNRTTxOneByte: SendRTS, before WaitOTS\n");
#endif

if(ppNRTWaitOTS()!=TRUE) return TIMEOUT;
outp(TX_PORT,port);
ppSendDR(); /* Data Ready */

#if PP_DEBUG == 1
kern_printf("ppNRTTxOneByte: SendDR, before WaitER\n");
#endif

if(ppNRTWaitER() !=TRUE) return TIMEOUT;

/*------------------------- More Significative Nibble */
ppSendRTS(); /* Request To Send */

port = inp(TX_PORT); /* read port status */
port = port & (~TX_DATA); /* set off trasmission bits... */
port = port | (c >> 4); /* set bit 0..3 with MSN */

#if PP_DEBUG == 1
kern_printf("ppNRTTxOneByte: SendRTS, before WaitOTS\n");
#endif

if(ppNRTWaitOTS()!=TRUE) return TIMEOUT;
outp(TX_PORT,port); /* send data nibble... */
ppSendDR(); /* Data Ready */

#if PP_DEBUG == 1
kern_printf("ppNRTTxOneByte: SendDR, before WaitER\n");
#endif

if(ppNRTWaitER() !=TRUE) return TIMEOUT;

return TRUE;
}

/**************************************************************************/
BOOL ppNRTRxOneByte(BYTE *c)
{
BYTE port;

if(ppIsRTS() == FALSE) return FALSE;

ppSendOTS(); /* Ok To Send */

#if PP_DEBUG == 1
kern_printf("ppNRTRxOneByte: IsRTS, SendOTS, before WaitDR\n");
#endif

if(ppNRTWaitDR() != TRUE) return TIMEOUT;
port = inp(RX_PORT); /* read nibble */
ppSendER(); /* End Read */
*c = (port >> 3); /* read LSN */

#if PP_DEBUG == 1
kern_printf("ppNRTRxOneByte: SendER, before WaitRTS\n");
#endif

if(ppNRTWaitRTS() != TRUE) return TIMEOUT;
ppSendOTS();

#if PP_DEBUG == 1
kern_printf("ppNRTRxOneByte: SendOTS, before WaitDR\n");
#endif

if(ppNRTWaitDR() != TRUE) return TIMEOUT;

#if PP_DEBUG == 1
kern_printf("ppNRTRxOneByte: DR received, send ER\n");
#endif

port = inp(RX_PORT); /* read nibble */
ppSendER(); /* End Read */
*c = (*c & ~MSN); /* set 0 c MSN nibble... */
*c = (*c | ((port >> 3) << 4)); /* read MSN */

return TRUE;
}

/*************************************************************************
------------------------------------------------------------------------*/
BOOL ppNRTOpenComm(void)
{
BYTE c,port,rx,tx;
TIME start = clock();

outp(TX_PORT,0);
outp(TX_CTR,0);

do
{
port = inp(RX_PORT); /* read nibble */
/* x4321x xx */
c = (port >> 3); /* xxxx 4321 */
c = c & 0xF; /* 0000 4321 */
if(clock() > start + CLK_TIMEOUT*20) return TIMEOUT;

} while (c != 0); /* test nibble 4321 == 0000 */

/* the other also is laying down his TX_PORT (==my RX_PORT...) */

rx = FALSE; tx = FALSE; start = clock();
do /* try if it also on line... */
{

if((rx == FALSE) && (ppNRTRxOneByte(&c)==TRUE) && (c == BYTE_CTR)) rx = TRUE;
if((tx == FALSE) && (ppNRTTxOneByte(BYTE_CTR) == TRUE)) tx = TRUE;

if(clock() > start + CLK_TIMEOUT*20) return TIMEOUT;

} while(tx==FALSE || rx==FALSE);

ppSendER();
ppNRTWaitER();

return TRUE;

}

Subversion Repositories shark

(root)/shark/trunk/drivers/parport/ppnrtdrv.c @ 721 - Rev 20