Blame |
Last modification |
View Log
| RSS feed
/*
* direct.c - Low-level direct PCI config space access
*/
#include <linuxcomp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include "pci2.h"
/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
static int pci_conf1_read (int seg, int bus, int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
spin_lock_irqsave(&pci_config_lock, flags);
outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
switch (len) {
case 1:
*value = inb(0xCFC + (reg & 3));
break;
case 2:
*value = inw(0xCFC + (reg & 2));
break;
case 4:
*value = inl(0xCFC);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static int pci_conf1_write (int seg, int bus, int devfn, int reg, int len, u32 value)
{
unsigned long flags;
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
spin_lock_irqsave(&pci_config_lock, flags);
outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
switch (len) {
case 1:
outb((u8)value, 0xCFC + (reg & 3));
break;
case 2:
outw((u16)value, 0xCFC + (reg & 2));
break;
case 4:
outl((u32)value, 0xCFC);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
#undef PCI_CONF1_ADDRESS
struct pci_raw_ops pci_direct_conf1 = {
.read = pci_conf1_read,
.write = pci_conf1_write,
};
/*
* Functions for accessing PCI configuration space with type 2 accesses
*/
#define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg)
static int pci_conf2_read(int seg, int bus, int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
int dev, fn;
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
dev = PCI_SLOT(devfn);
fn = PCI_FUNC(devfn);
if (dev & 0x10)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pci_config_lock, flags);
outb((u8)(0xF0 | (fn << 1)), 0xCF8);
outb((u8)bus, 0xCFA);
switch (len) {
case 1:
*value = inb(PCI_CONF2_ADDRESS(dev, reg));
break;
case 2:
*value = inw(PCI_CONF2_ADDRESS(dev, reg));
break;
case 4:
*value = inl(PCI_CONF2_ADDRESS(dev, reg));
break;
}
outb(0, 0xCF8);
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static int pci_conf2_write (int seg, int bus, int devfn, int reg, int len, u32 value)
{
unsigned long flags;
int dev, fn;
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
dev = PCI_SLOT(devfn);
fn = PCI_FUNC(devfn);
if (dev & 0x10)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pci_config_lock, flags);
outb((u8)(0xF0 | (fn << 1)), 0xCF8);
outb((u8)bus, 0xCFA);
switch (len) {
case 1:
outb((u8)value, PCI_CONF2_ADDRESS(dev, reg));
break;
case 2:
outw((u16)value, PCI_CONF2_ADDRESS(dev, reg));
break;
case 4:
outl((u32)value, PCI_CONF2_ADDRESS(dev, reg));
break;
}
outb(0, 0xCF8);
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
#undef PCI_CONF2_ADDRESS
static struct pci_raw_ops pci_direct_conf2 = {
.read = pci_conf2_read,
.write = pci_conf2_write,
};
/*
* Before we decide to use direct hardware access mechanisms, we try to do some
* trivial checks to ensure it at least _seems_ to be working -- we just test
* whether bus 00 contains a host bridge (this is similar to checking
* techniques used in XFree86, but ours should be more reliable since we
* attempt to make use of direct access hints provided by the PCI BIOS).
*
* This should be close to trivial, but it isn't, because there are buggy
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
*/
static int __init pci_sanity_check(struct pci_raw_ops *o)
{
u32 x = 0;
int devfn;
if (pci_probe & PCI_NO_CHECKS)
return 1;
for (devfn = 0; devfn < 0x100; devfn++) {
if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x))
continue;
if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)
return 1;
if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x))
continue;
if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)
return 1;
}
DBG("PCI: Sanity check failed\n");
return 0;
}
static int __init pci_check_type1(void)
{
unsigned long flags;
unsigned int tmp;
int works = 0;
local_irq_save(flags);
outb(0x01, 0xCFB);
tmp = inl(0xCF8);
outl(0x80000000, 0xCF8);
if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) {
works = 1;
}
outl(tmp, 0xCF8);
local_irq_restore(flags);
return works;
}
static int __init pci_check_type2(void)
{
unsigned long flags;
int works = 0;
local_irq_save(flags);
outb(0x00, 0xCFB);
outb(0x00, 0xCF8);
outb(0x00, 0xCFA);
if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 &&
pci_sanity_check(&pci_direct_conf2)) {
works = 1;
}
local_irq_restore(flags);
return works;
}
int __init pci_direct_init(void)
{
struct resource *region, *region2;
if ((pci_probe & PCI_PROBE_CONF1) == 0)
goto type2;
region = request_region(0xCF8, 8, "PCI conf1");
if (!region)
goto type2;
if (pci_check_type1()) {
printk(KERN_INFO "PCI: Using configuration type 1\n");
raw_pci_ops = &pci_direct_conf1;
return 0;
}
release_resource(region);
type2:
if ((!pci_probe & PCI_PROBE_CONF2) == 0)
goto out;
region = request_region(0xCF8, 4, "PCI conf2");
if (!region)
goto out;
region2 = request_region(0xC000, 0x1000, "PCI conf2");
if (!region2)
goto fail2;
if (pci_check_type2()) {
printk(KERN_INFO "PCI: Using configuration type 2\n");
raw_pci_ops = &pci_direct_conf2;
return 0;
}
release_resource(region2);
fail2:
release_resource(region);
out:
return 0;
}
arch_initcall(pci_direct_init);