Blame | Last modification | View Log | RSS feed
#----------------------------------------------------------------------# SVGAlib Compile-time configuration file#----------------------------------------------------------------------# If you change ANYTHING in here you MUST 'make clean' and remake what# you need.## BEWARE! The toggle settings (INCLUDE_*_DRIVER and such) are set when# the symbols are set. The value is pointless. Even setting a variable# to n means yes!#MAJOR_VER = 1#MINOR_VER = 9.17#VERSION = $(MAJOR_VER).$(MINOR_VER)#----------------------------------------------------------------------# Kernel module Configuration Section#----------------------------------------------------------------------# Char major device used by module#SVGALIB_HELPER_MAJOR = 209# Linux kernel includes#ifeq ($(KERNELRELEASE),)#KERNELRELEASE = $(shell uname -r)#endif#INCLUDEDIR = /lib/modules/$(KERNELRELEASE)/build/include#DIREXIST = $(shell if [ -e $(INCLUDEDIR) ] ; then echo OK ; fi)#ifneq ($(DIREXIST), OK)#INCLUDEDIR = /usr/src/linux/include#endif#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)#----------------------------------------------------------------------# Configuration Section#----------------------------------------------------------------------# Source directory.#srcdir = /usr/local/src/svgalib-$(VERSION)#srcdir = $(shell sh -c pwd)#confdir = $(srcdir)/src/config# Common prefix for installation directories.# NOTE: This directory must exist when you start the install.#TOPDIR=#prefix = $(TOPDIR)/usr/local#exec_prefix = $(prefix)# Directory where the shared stubs and static library will be installed.#libdir = $(exec_prefix)/lib# Directory where the shared library will be installed.#sharedlibdir = $(exec_prefix)/lib# Directory where the font and textmode utilities will be installed.#bindir = $(exec_prefix)/bin# Directory where the run-time configuration files will be installed.#datadir = $(TOPDIR)/etc/vga# Directory where the header files will be installed.#includedir = $(prefix)/include# Directory where the man files will be installed.#mandir = $(prefix)/man# Target binary format.#TARGET_FORMAT = elf# uncomment any of the following line to print some debug messages# DEBUG = yes# DEBUG_CONFIG = yes# DEBUG_ACCEL = yes# DEBUG_KEYBOARD = yes# uncomment this if your compiler fails on compiling the assembler in# src/vgaconvplanar.c, gl/inlstring.h, gl/line.c or gl/scale.c# NO_ASM = y# uncomment if you want to set attribute controller and dac without delay# This breaks original VGA, but seems to work on new cards.NO_DELAY = y# Uncomment this if you want root processes to be able to always get a new# VC. Alas, some games misuse suid root privs and become root, svgalib cannot# detect this and will allow Joe blow user to open a new virtual VC. If this# annoys you, comment out the next line (which is the default already)ROOT_VC_SHORTCUT = y# Uncomment thit to use libc's memcpy, instead of simple while loop.# Use demos/linearspeed to see which is faster to video memory.# LIBC_MEMCPY = y# Uncomment this if you want to compile and install the static libs.# INSTALLSTATICLIB = installstaticlib# Comment this out if you don't want to install the shared libs.# If you do not install the shared nor the static libs, 'make static'# first to enforce just building the static lib, then the demos will# use this local static library!#INSTALLSHAREDLIB = installsharedlib# Comment this out if you want to keep old shared images. Old header files,# library stubs and static libraries CANNOT be kept in public locations# except when you rename them yourself.# KEEPSHAREDLIBS = keep# Comment this out if you don't want to compile and install the utilities.#INSTALLUTILS = installutils# Comment this out if you don't want to install the man pages by default#INSTALLMAN = installman# Remove the '# ' from one of the next two lines if you want to install the# man pages compressed (with gzip) or not. If you comment out both lines,# the Makefiles will try to figure out if your system supports gzipped man# pages and install them when possible.# MANFORMAT = compressed# MANFORMAT = uncompressed# This is the command to update the man pages whatis database.# This is a slow command. If you are not very patient, simple# comment out this line# MAKEWHATIS = makewhatis # Beware, this will really need a few minutes!# Comment this out if you use devfs only and don't want to make svga nodes#INSTALLDEV = installdev## Comment out any driver that you don't want included in the library.##INCLUDE_ET4000_DRIVER = y#INCLUDE_OAK_DRIVER = y#INCLUDE_EGA_DRIVER = y#INCLUDE_MACH32_DRIVER = y#INCLUDE_ET3000_DRIVER = y#INCLUDE_GVGA6400_DRIVER = y#INCLUDE_ATI_DRIVER = yINCLUDE_CHIPS_DRIVER = yINCLUDE_APM_DRIVER = yINCLUDE_NV3_DRIVER = yINCLUDE_G400_DRIVER = yINCLUDE_R128_DRIVER = yINCLUDE_VESA_DRIVER = yINCLUDE_MX_DRIVER = yINCLUDE_RENDITION_DRIVER = yINCLUDE_RAGE_DRIVER = yINCLUDE_BANSHEE_DRIVER = yINCLUDE_SIS_DRIVER = yINCLUDE_I740_DRIVER = yINCLUDE_I810_DRIVER = yINCLUDE_LAGUNA_DRIVER = yINCLUDE_TRIDENT_DRIVER = yINCLUDE_SAVAGE_DRIVER = yINCLUDE_MILLENNIUM_DRIVER = y#INCLUDE_G450C2_DRIVER = yINCLUDE_PM2_DRIVER = yINCLUDE_NEO_DRIVER = yINCLUDE_ET6000_DRIVER = yINCLUDE_FBDEV_DRIVER = yINCLUDE_PARADISE_DRIVER = yINCLUDE_ARK_DRIVER = yINCLUDE_S3_DRIVER = yINCLUDE_CIRRUS_DRIVER = yINCLUDE_TVGA_DRIVER = yINCLUDE_ALI_DRIVER = y## Comment out any adapter you don't want to autodetect.##INCLUDE_ET4000_DRIVER_TEST = yINCLUDE_CIRRUS_DRIVER_TEST = yINCLUDE_TVGA_DRIVER_TEST = yINCLUDE_OAK_DRIVER_TEST = yINCLUDE_EGA_DRIVER_TEST = yINCLUDE_MACH32_DRIVER_TEST = yINCLUDE_GVGA6400_DRIVER_TEST = yINCLUDE_S3_DRIVER_TEST = yINCLUDE_ET3000_DRIVER_TEST = yINCLUDE_ARK_DRIVER_TEST = yINCLUDE_ATI_DRIVER_TEST = yINCLUDE_ALI_DRIVER_TEST = yINCLUDE_CHIPS_DRIVER_TEST = yINCLUDE_APM_DRIVER_TEST = yINCLUDE_NV3_DRIVER_TEST = yINCLUDE_G400_DRIVER_TEST = yINCLUDE_R128_DRIVER_TEST = yINCLUDE_ET6000_DRIVER_TEST = yINCLUDE_MX_DRIVER_TEST = yINCLUDE_TRIDENT_DRIVER_TEST = yINCLUDE_PARADISE_DRIVER_TEST = yINCLUDE_RAGE_DRIVER_TEST = yINCLUDE_BANSHEE_DRIVER_TEST = yINCLUDE_SIS_DRIVER_TEST = yINCLUDE_I740_DRIVER_TEST = yINCLUDE_I810_DRIVER_TEST = yINCLUDE_LAGUNA_DRIVER_TEST = yINCLUDE_NEO_DRIVER_TEST = yINCLUDE_SAVAGE_DRIVER_TEST = yINCLUDE_MILLENNIUM_DRIVER_TEST = yINCLUDE_RENDITION_DRIVER_TEST = yINCLUDE_PM2_DRIVER_TEST = y#INCLUDE_FBDEV_DRIVER_TEST = y#Might be too dangerous:#INCLUDE_VESA_DRIVER_TEST = y## Comment out any dac support that you don't want included in the library.## you must include SIERRA_DAC, if you include any of SCxxxx DACs.INCLUDE_NORMAL_DAC = yINCLUDE_S3_SDAC_DAC = yINCLUDE_S3_GENDAC_DAC = yINCLUDE_S3_TRIO64_DAC = yINCLUDE_SIERRA_DAC = yINCLUDE_SC15025_DAC = yINCLUDE_ATT20C490_DAC = yINCLUDE_ATT20C498_DAC = yINCLUDE_ICW_DAC = yINCLUDE_IBMRGB52x_DAC = yINCLUDE_SC1148X_DAC = yINCLUDE_ICS_GENDAC_DAC = y## Comment out any dac you don't want to autodetect.# (not all dacs can be autodetected, at this time)#INCLUDE_S3_SDAC_DAC_TEST = yINCLUDE_S3_GENDAC_DAC_TEST = yINCLUDE_SC15025_DAC_TEST = yINCLUDE_ATT20C490_DAC_TEST = yINCLUDE_IBMRGB52x_DAC_TEST = yINCLUDE_SC1148X_DAC_TEST = yINCLUDE_ICS_GENDAC_DAC_TEST = y# Location of the svgalib configuration file.#SVGALIB_CONFIG_FILE = $(datadir)/libvga.config# Defining DYNAMIC enables runtime parsing of the file defined by# ET4000_REGS (usually /etc/libvga.et4000) for the et4000# driver. See et4000/README for details. Commenting this out again# saves binary space.## If you just want to use the et4000.regs in the source directory,# comment out the definition of DYNAMIC. DYNAMIC allows development of new# resolutions without recompiling.#DYNAMIC = y#ET4000_REGS = $(datadir)/libvga.et4000# The EGA driver may load additional modes (SuperEGA cards) like the# et4000 driver does. Just define the configuration file below.# [This should be taken with a grain of salt, EGA is untested.]#EGA_REGS = $(datadir)/libvga.ega# Defining USE_CLOCKS will cause the ET4000 driver to measure clock# frequencies (they are not actually used yet).#USE_CLOCKS = y# Uncomment to allow mouse type overrides#ALLOW_MOUSE_OVERRIDE = y#----------------------------------------------------------------------# Compiler Section#----------------------------------------------------------------------# Compiler used.#PC = ppc386##ifndef CC# CC = gcc#endif#ifndef CFLAGS# OPTIMIZE = -fomit-frame-pointer -O2 -fno-strength-reduce -pipe -g#else# OPTIMIZE := $(CFLAGS)#endif# You might want to add -m386 here if you have a recently installed# (486 configured) compiler on a 386. The only real difference is the# generous alignment padding of function entry-points for the 486.#WARN = -Wall -Wstrict-prototypes#INCLUDES = -I$(srcdir)/include -I.#CFLAGS = $(WARN) $(DLLFLAGS) $(INCLUDES) $(OPTIMIZE) $(DEFINES)#LDFLAGS = -s# additional flags for shared lib.#DLLFLAGS = -fPIC# Utilites used.#AR = ar#INSTALL_PROGRAM = install -c -s -m 755 -o root -g bin#INSTALL_SHLIB = install -c -m 755 -o root -g bin#INSTALL_DATA = install -c -m 644 -o root -g bin#ifneq ($(ARCH),i386)# NO_ASM = y# INCLUDE_VESA_DRIVER=## INCLUDE_CHIPS_DRIVER=# INCLUDE_ET4000_DRIVER=# INCLUDE_MACH32_DRIVER=# INCLUDE_NEO_DRIVER=# INCLUDE_S3_DRIVER=# INCLUDE_TVGA_DRIVER=#endif#ifneq($(INCLUDE_S3_DRIVER),y)# INCLUDE_NORMAL_DAC =# INCLUDE_S3_SDAC_DAC =# INCLUDE_S3_GENDAC_DAC =# INCLUDE_S3_TRIO64_DAC =# INCLUDE_SIERRA_DAC =# INCLUDE_SC15025_DAC =# INCLUDE_ATT20C490_DAC =# INCLUDE_ATT20C498_DAC =# INCLUDE_ICW_DAC =# INCLUDE_IBMRGB52x_DAC =# INCLUDE_SC1148X_DAC =#endif