Subversion Repositories shark

Rev

Rev 1130 | Rev 1155 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * Project: S.Ha.R.K.
 *
 * Coordinators:
 *   Giorgio Buttazzo    <giorgio@sssup.it>
 *   Paolo Gai           <pj@gandalf.sssup.it>
 *
 * Authors     :
 *   Giacomo Guidi       <giacomo@gandalf.sssup.it>
 *
 *
 * ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
 *
 * http://www.sssup.it
 * http://retis.sssup.it
 * http://shark.sssup.it
 */


#include <drivers/vga.h>
#include <drivers/keyb.h>

#include <GL/osmesa.h>
#include <GL/glut.h>

#include <math.h>
#include <stdlib.h>

#include <kernel/log.h>
#include <kernel/kern.h>

#ifndef M_PI
#define M_PI 3.14159265
#endif

#define WIDTH 640
#define HEIGHT 480
#define BYTES_PP 2 //BytesPerPixel
#define INITSTR G640x480x64K //SVGAlib standard mode definitions
#define CARD VESA //Video driver

OSMesaContext ctx;

unsigned char *rgb_565_buf = NULL; //RGB 16 bpp Buffer
unsigned char *video_buf = NULL; //Video Buffer

unsigned long int VMEMLONG = WIDTH * HEIGHT * BYTES_PP / 4; // Used by copy_videomem_16to16
unsigned long int RGB565MEM = WIDTH * HEIGHT * BYTES_PP; // Total video mem

unsigned long int PERIOD_REFRESH = 50000; //fps = 20 Test
unsigned long int PERIOD_DISEGNA = 50000;

unsigned long int WCET_REFRESH, WCET_DISEGNA;

TASK refesh(void);
TASK disegna(void);

PID refresh_PID, disegna_PID;

static void
gear(GLfloat inner_radius, GLfloat outer_radius, GLfloat width,
  GLint teeth, GLfloat tooth_depth)
{
  GLint i;
  GLfloat r0, r1, r2;
  GLfloat angle, da;
  GLfloat u, v, len;

  r0 = inner_radius;
  r1 = outer_radius - tooth_depth / 2.0;
  r2 = outer_radius + tooth_depth / 2.0;

  da = 2.0 * M_PI / teeth / 4.0;

  glShadeModel(GL_FLAT);

  glNormal3f(0.0, 0.0, 1.0);

  glBegin(GL_QUAD_STRIP);
  for (i = 0; i <= teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;
    glVertex3f(r0 * cos(angle), r0 * sin(angle), width * 0.5);
    glVertex3f(r1 * cos(angle), r1 * sin(angle), width * 0.5);
    if (i < teeth) {
      glVertex3f(r0 * cos(angle), r0 * sin(angle), width * 0.5);
      glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), width * 0.5);
    }
  }
  glEnd();

  glBegin(GL_QUADS);
  da = 2.0 * M_PI / teeth / 4.0;
  for (i = 0; i < teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;

    glVertex3f(r1 * cos(angle), r1 * sin(angle), width * 0.5);
    glVertex3f(r2 * cos(angle + da), r2 * sin(angle + da), width * 0.5);
    glVertex3f(r2 * cos(angle + 2 * da), r2 * sin(angle + 2 * da), width * 0.5);
    glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), width * 0.5);
  }
  glEnd();

  glNormal3f(0.0, 0.0, -1.0);

  glBegin(GL_QUAD_STRIP);
  for (i = 0; i <= teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;
    glVertex3f(r1 * cos(angle), r1 * sin(angle), -width * 0.5);
    glVertex3f(r0 * cos(angle), r0 * sin(angle), -width * 0.5);
    if (i < teeth) {
      glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), -width * 0.5);
      glVertex3f(r0 * cos(angle), r0 * sin(angle), -width * 0.5);
    }
  }
  glEnd();

  glBegin(GL_QUADS);
  da = 2.0 * M_PI / teeth / 4.0;
  for (i = 0; i < teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;

    glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), -width * 0.5);
    glVertex3f(r2 * cos(angle + 2 * da), r2 * sin(angle + 2 * da), -width * 0.5);
    glVertex3f(r2 * cos(angle + da), r2 * sin(angle + da), -width * 0.5);
    glVertex3f(r1 * cos(angle), r1 * sin(angle), -width * 0.5);
  }
  glEnd();

  glBegin(GL_QUAD_STRIP);
  for (i = 0; i < teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;

    glVertex3f(r1 * cos(angle), r1 * sin(angle), width * 0.5);
    glVertex3f(r1 * cos(angle), r1 * sin(angle), -width * 0.5);
    u = r2 * cos(angle + da) - r1 * cos(angle);
    v = r2 * sin(angle + da) - r1 * sin(angle);
    len = sqrt(u * u + v * v);
    u /= len;
    v /= len;
    glNormal3f(v, -u, 0.0);
    glVertex3f(r2 * cos(angle + da), r2 * sin(angle + da), width * 0.5);
    glVertex3f(r2 * cos(angle + da), r2 * sin(angle + da), -width * 0.5);
    glNormal3f(cos(angle), sin(angle), 0.0);
    glVertex3f(r2 * cos(angle + 2 * da), r2 * sin(angle + 2 * da), width * 0.5);
    glVertex3f(r2 * cos(angle + 2 * da), r2 * sin(angle + 2 * da), -width * 0.5);
    u = r1 * cos(angle + 3 * da) - r2 * cos(angle + 2 * da);
    v = r1 * sin(angle + 3 * da) - r2 * sin(angle + 2 * da);
    glNormal3f(v, -u, 0.0);
    glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), width * 0.5);
    glVertex3f(r1 * cos(angle + 3 * da), r1 * sin(angle + 3 * da), -width * 0.5);
    glNormal3f(cos(angle), sin(angle), 0.0);
  }

  glVertex3f(r1 * cos(0), r1 * sin(0), width * 0.5);
  glVertex3f(r1 * cos(0), r1 * sin(0), -width * 0.5);

  glEnd();

  glShadeModel(GL_SMOOTH);

  glBegin(GL_QUAD_STRIP);
  for (i = 0; i <= teeth; i++) {
    angle = i * 2.0 * M_PI / teeth;
    glNormal3f(-cos(angle), -sin(angle), 0.0);
    glVertex3f(r0 * cos(angle), r0 * sin(angle), -width * 0.5);
    glVertex3f(r0 * cos(angle), r0 * sin(angle), width * 0.5);
  }
  glEnd();

}

static GLfloat view_rotx = 20.0, view_roty = 30.0, view_rotz = 0.0;
static GLint gear1, gear2, gear3;
static GLfloat angle = 0.0;

static void draw(void)
{
  glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

  glPushMatrix();
    glRotatef(view_rotx, 1.0, 0.0, 0.0);
    glRotatef(view_roty, 0.0, 1.0, 0.0);
    glRotatef(view_rotz, 0.0, 0.0, 1.0);

    glPushMatrix();
      glTranslatef(-3.0, -2.0, 0.0);
      glRotatef(angle, 0.0, 0.0, 1.0);
      glCallList(gear1);
    glPopMatrix();

    glPushMatrix();
      glTranslatef(3.1, -2.0, 0.0);
      glRotatef(-2.0 * angle - 9.0, 0.0, 0.0, 1.0);
      glCallList(gear2);
    glPopMatrix();

    glPushMatrix();
      glTranslatef(-3.1, 4.2, 0.0);
      glRotatef(-2.0 * angle - 25.0, 0.0, 0.0, 1.0);
      glCallList(gear3);
    glPopMatrix();

  glPopMatrix();

  glFinish();

}

static void gl_init()
{

  static GLfloat red[4] = {1.0, 0.0, 0.0, 1.0};
  static GLfloat green[4] = {0.0, 0.8, 0.2, 1.0};
  static GLfloat blue[4] = {0.2, 0.2, 1.0, 1.0};
  static GLfloat pos[4] = {5.0, 5.0, 10.0, 1.0};
  static GLfloat h = (GLfloat) HEIGHT / (GLfloat) WIDTH;

  //Create the OSMesa Context
  ctx = OSMesaCreateContext(OSMESA_RGB_565, NULL);

  //Make Current Context
  OSMesaMakeCurrent(ctx, rgb_565_buf, GL_UNSIGNED_SHORT_5_6_5, WIDTH, HEIGHT);
 
  glLightfv(GL_LIGHT0, GL_POSITION, pos);
  glEnable(GL_CULL_FACE);
  glEnable(GL_LIGHTING);
  glEnable(GL_LIGHT0);
  glEnable(GL_DEPTH_TEST);
   
  /* make the gears */
  gear1 = glGenLists(1);
  glNewList(gear1, GL_COMPILE);
  glMaterialfv(GL_FRONT, GL_AMBIENT_AND_DIFFUSE, red);
  gear(1.0, 4.0, 1.0, 20, 0.7);
  glEndList();

  gear2 = glGenLists(1);
  glNewList(gear2, GL_COMPILE);
  glMaterialfv(GL_FRONT, GL_AMBIENT_AND_DIFFUSE, green);
  gear(0.5, 2.0, 2.0, 10, 0.7);
  glEndList();

  gear3 = glGenLists(1);
  glNewList(gear3, GL_COMPILE);
  glMaterialfv(GL_FRONT, GL_AMBIENT_AND_DIFFUSE, blue);
  gear(1.3, 2.0, 0.5, 10, 0.7);
  glEndList();
 
  glEnable(GL_NORMALIZE);

  glViewport(0, 0, (GLint) WIDTH, (GLint) HEIGHT);
  glMatrixMode(GL_PROJECTION);
  glLoadIdentity();
  glFrustum(-1.0, 1.0, -h, h, 5.0, 60.0);
  glMatrixMode(GL_MODELVIEW);
  glLoadIdentity();
  glTranslatef(0.0, 0.0, -40.0);

}

static int screen(int mode)
{

  vga_modeinfo *minf;

  vga_setmode(mode,CARD);
  minf = vga_getmodeinfo(mode);
  if(! (minf->flags & CAPABLE_LINEAR)){
    vga_setmode(TEXT,CARD);
    printk(KERN_INFO "The mode %d is not capable of linear\n",mode);
    return 1;
  }
  vga_setpage(0);
  if(vga_setlinearaddressing() == -1) {
    vga_setmode(TEXT,CARD);
    printk(KERN_INFO "Could not set linear addressing for mode %d\n",mode);
    return 1;
  }
 
  video_buf = vga_getgraphmem();
  rgb_565_buf = malloc(RGB565MEM);

  grx_setbuffer(rgb_565_buf, WIDTH, HEIGHT);    //Init of RGB16 version of grx functions
                                                //created to work with Mesa buffer
  return 0;
 
}

void program_end(void *arg)
{
 
  OSMesaDestroyContext(ctx);
  free(rgb_565_buf);

  vga_setmode(TEXT,CARD);

  sys_end();

}

void program_key_end(KEY_EVT *k)
{
       
  sys_end();

}

TASK refresh(void)
{

  while(1) {

    copy_videomem_16to16(rgb_565_buf, video_buf, VMEMLONG);
    task_endcycle();

  }

  sys_end();

}


TASK disegna(void)
{

  char text[100];
  TIME disegna_TIME, refresh_TIME;
 
  while(1) {
   
    jet_gettable(refresh_PID, &refresh_TIME, 1);
    jet_gettable(disegna_PID, &disegna_TIME, 1);

    angle += 1.0;

    draw();
 
    sprintf(text,"Hard Task Refresh PER:%6d us EX:%6d us",(int)PERIOD_REFRESH,(int)refresh_TIME);
    grx_text(text,10,5,rgb16(0,0,255),0);    
    sprintf(text,"Hard Task Draw    PER:%6d us EX:%6d us",(int)PERIOD_DISEGNA,(int)disegna_TIME);
    grx_text(text,10,15,rgb16(0,0,255),0);

    task_endcycle();

  }

  sys_end();

}

int main (int argc, char *argv[])
{
   
    HARD_TASK_MODEL ht_refresh, ht_disegna;

    sys_atrunlevel(program_end,NULL, RUNLEVEL_BEFORE_EXIT);

    clear();
   
    WCET_REFRESH =((long int) PERIOD_REFRESH * (0.3));
    WCET_DISEGNA =((long int) PERIOD_DISEGNA * (0.65));

    hard_task_default_model(ht_refresh);
    hard_task_def_wcet(ht_refresh,WCET_REFRESH);
    hard_task_def_mit(ht_refresh,PERIOD_REFRESH);
    hard_task_def_usemath(ht_refresh);
    hard_task_def_group(ht_refresh,1);
    hard_task_def_ctrl_jet(ht_refresh);

    refresh_PID = task_create("refresh", refresh, &ht_refresh, NULL);
    if (refresh_PID == -1) {
      sys_end();
      exit(4);
    }

    hard_task_default_model(ht_disegna);
    hard_task_def_mit(ht_disegna,PERIOD_DISEGNA);
    hard_task_def_wcet(ht_disegna,WCET_DISEGNA);
    hard_task_def_group(ht_disegna,1);
    hard_task_def_ctrl_jet(ht_disegna);
    hard_task_def_usemath(ht_disegna);
    hard_task_def_stack(ht_disegna,60000); //VERY IMPORTANT FOR glCallList !!

    disegna_PID = task_create("disegna", disegna, &ht_disegna, NULL);
    if (disegna_PID == -1) {
      sys_end();
      exit(4);
    }

    {
      KEY_EVT k;
      k.flag = ALTL_BIT;
      k.scan = KEY_C;
      k.ascii = 'c';
      keyb_hook(k,program_key_end);
    }
       
    if (screen(INITSTR)) {
        printk(KERN_INFO "Graphical initialization failed !!\n");
        sys_end();
    }

    memset(rgb_565_buf, 0, RGB565MEM);

    gl_init();

    group_activate(1);

    return 0;
       
}