WebSVN - shark - Rev 1618 - /shark/branches/xen/drivers/usb/host/ohci-hcd.c

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
*
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
*
*
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
* History:
*
* 2003/02/24 show registers in sysfs (Kevin Brosius)
*
* 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
* bandwidth accounting; if debugging, show schedules in driverfs
* 2002/07/19 fixes to management of ED and schedule state.
* 2002/06/09 SA-1111 support (Christopher Hoover)
* 2002/06/01 remember frame when HC won't see EDs any more; use that info
* to fix urb unlink races caused by interrupt latency assumptions;
* minor ED field and function naming updates
* 2002/01/18 package as a patch for 2.5.3; this should match the
* 2.4.17 kernel modulo some bugs being fixed.
*
* 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
* from post-2.4.5 patches.
* 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
* 2001/09/07 match PCI PM changes, errnos from Linus' tree
* 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
* pbook pci quirks gone (please fix pbook pci sw!) (db)
*
* 2001/04/08 Identify version on module load (gb)
* 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
pci_map_single (db)
* 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
* 2001/03/07 hcca allocation uses pci_alloc_consistent_usb (Steve Longerbeam)
*
* 2000/09/26 fixed races in removing the private portion of the urb
* 2000/09/07 disable bulk and control lists when unlinking the last
* endpoint descriptor in order to avoid unrecoverable errors on
* the Lucent chips. (rwc@sgi)
* 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
* urb unlink probs, indentation fixes
* 2000/08/11 various oops fixes mostly affecting iso and cleanup from
* device unplugs.
* 2000/06/28 use PCI hotplug framework, for better power management
* and for Cardbus support (David Brownell)
* 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
* when the controller loses power; handle UE; cleanup; ...
*
* v5.2 1999/12/07 URB 3rd preview,
* v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
* v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
* i386: HUB, Keyboard, Mouse, Printer
*
* v4.3 1999/10/27 multiple HCs, bulk_request
* v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
* v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
* v4.0 1999/08/18
* v3.0 1999/06/25
* v2.1 1999/05/09 code clean up
* v2.0 1999/05/04
* v1.0 1999/04/27 initial release
*
* This file is licenced under the GPL.
*/

#include <linuxcomp.h>

#include <linux/config.h>

#ifdef CONFIG_USB_DEBUG
# define DEBUG
#else
# undef DEBUG
#endif

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h> /* for in_interrupt () */
#include <linux/usb.h>
#include "../core/hcd.h"

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>

#define DRIVER_VERSION "2003 Oct 13"
#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"

/*-------------------------------------------------------------------------*/

//#define OHCI_VERBOSE_DEBUG /* not always helpful */

/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE

#define OHCI_UNLINK_TIMEOUT (HZ / 10)

/*-------------------------------------------------------------------------*/

static const char hcd_name [] = "ohci_hcd";

#include "ohci.h"

static inline void disable (struct ohci_hcd *ohci)
{
ohci->hcd.state = USB_STATE_HALT;
}

#include "ohci-hub.c"
#include "ohci-dbg.c"
#include "ohci-mem.c"
#include "ohci-q.c"

/*-------------------------------------------------------------------------*/

/*
* queue up an urb for anything except the root hub
*/
static int ohci_urb_enqueue (
struct usb_hcd *hcd,
struct urb *urb,
int mem_flags
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ed *ed;
urb_priv_t *urb_priv;
unsigned int pipe = urb->pipe;
int i, size = 0;
unsigned long flags;
int retval = 0;

#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif

/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, urb->dev, pipe, urb->interval)))
return -ENOMEM;

/* for the private part of the URB we need the number of TDs (size) */
switch (ed->type) {
case PIPE_CONTROL:
/* td_submit_urb() doesn't yet handle these */
if (urb->transfer_buffer_length > 4096)
return -EMSGSIZE;

/* 1 TD for setup, 1 for ACK, plus ... */
size = 2;
/* FALLTHROUGH */
// case PIPE_INTERRUPT:
// case PIPE_BULK:
default:
/* one TD for every 4096 Bytes (can be upto 8K) */
size += urb->transfer_buffer_length / 4096;
/* ... and for any remaining bytes ... */
if ((urb->transfer_buffer_length % 4096) != 0)
size++;
/* ... and maybe a zero length packet to wrap it up */
if (size == 0)
size++;
else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
&& (urb->transfer_buffer_length
% usb_maxpacket (urb->dev, pipe,
usb_pipeout (pipe))) == 0)
size++;
break;
case PIPE_ISOCHRONOUS: /* number of packets from URB */
size = urb->number_of_packets;
break;
}

/* allocate the private part of the URB */
urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
mem_flags);
if (!urb_priv)
return -ENOMEM;
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));

/* fill the private part of the URB */
urb_priv->length = size;
urb_priv->ed = ed;

/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
urb_priv->td [i] = td_alloc (ohci, mem_flags);
if (!urb_priv->td [i]) {
urb_priv->length = i;
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
}

spin_lock_irqsave (&ohci->lock, flags);

/* don't submit to a dead HC */
if (!HCD_IS_RUNNING(ohci->hcd.state)) {
retval = -ENODEV;
goto fail;
}

/* schedule the ed if needed */
if (ed->state == ED_IDLE) {
retval = ed_schedule (ohci, ed);
if (retval < 0)
goto fail;
if (ed->type == PIPE_ISOCHRONOUS) {
u16 frame = le16_to_cpu (ohci->hcca->frame_no);

/* delay a few frames before the first TD */
frame += max_t (u16, 8, ed->interval);
frame &= ~(ed->interval - 1);
frame |= ed->branch;
urb->start_frame = frame;

/* yes, only URB_ISO_ASAP is supported, and
* urb->start_frame is never used as input.
*/
}
} else if (ed->type == PIPE_ISOCHRONOUS)
urb->start_frame = ed->last_iso + ed->interval;

/* fill the TDs and link them to the ed; and
* enable that part of the schedule, if needed
* and update count of queued periodic urbs
*/
urb->hcpriv = urb_priv;
td_submit_urb (ohci, urb);

fail:
if (retval)
urb_free_priv (ohci, urb_priv);
spin_unlock_irqrestore (&ohci->lock, flags);
return retval;
}

/*
* decouple the URB from the HC queues (TDs, urb_priv); it's
* already marked using urb->status. reporting is always done
* asynchronously, and we might be dealing with an urb that's
* partially transferred, or an ED with other urbs being unlinked.
*/
static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;

#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
#endif

spin_lock_irqsave (&ohci->lock, flags);
if (HCD_IS_RUNNING(ohci->hcd.state)) {
urb_priv_t *urb_priv;

/* Unless an IRQ completed the unlink while it was being
* handed to us, flag it for unlink and giveback, and force
* some upcoming INTR_SF to call finish_unlinks()
*/
urb_priv = urb->hcpriv;
if (urb_priv) {
if (urb_priv->ed->state == ED_OPER)
start_urb_unlink (ohci, urb_priv->ed);
}
} else {
/*
* with HC dead, we won't respect hc queue pointers
* any more ... just clean up every urb's memory.
*/
if (urb->hcpriv) {
spin_unlock (&ohci->lock);
finish_urb (ohci, urb, NULL);
spin_lock (&ohci->lock);
}
}
spin_unlock_irqrestore (&ohci->lock, flags);
return 0;
}

/*-------------------------------------------------------------------------*/

/* frees config/altsetting state for endpoints,
* including ED memory, dummy TD, and bulk/intr data toggle
*/

static void
ohci_endpoint_disable (struct usb_hcd *hcd, struct hcd_dev *dev, int ep)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int epnum = ep & USB_ENDPOINT_NUMBER_MASK;
unsigned long flags;
struct ed *ed;
unsigned limit = 1000;

/* ASSERT: any requests/urbs are being unlinked */
/* ASSERT: nobody can be submitting urbs for this any more */

epnum <<= 1;
if (epnum != 0 && !(ep & USB_DIR_IN))
epnum |= 1;

rescan:
spin_lock_irqsave (&ohci->lock, flags);
ed = dev->ep [epnum];
if (!ed)
goto done;

if (!HCD_IS_RUNNING (ohci->hcd.state))
ed->state = ED_IDLE;
switch (ed->state) {
case ED_UNLINK: /* wait for hw to finish? */
/* major IRQ delivery trouble loses INTR_SF too... */
WARN_ON (limit-- == 0);
spin_unlock_irqrestore (&ohci->lock, flags);
set_current_state (TASK_UNINTERRUPTIBLE);
schedule_timeout (1);
goto rescan;
case ED_IDLE: /* fully unlinked */
if (list_empty (&ed->td_list)) {
td_free (ohci, ed->dummy);
ed_free (ohci, ed);
break;
}
/* else FALL THROUGH */
default:
/* caller was supposed to have unlinked any requests;
* that's not our job. can't recover; must leak ed.
*/
ohci_err (ohci, "leak ed %p (#%d) state %d%s\n",
ed, epnum, ed->state,
list_empty (&ed->td_list) ? "" : " (has tds)");
td_free (ohci, ed->dummy);
break;
}
dev->ep [epnum] = 0;
done:
spin_unlock_irqrestore (&ohci->lock, flags);
return;
}

static int ohci_get_frame (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);

return le16_to_cpu (ohci->hcca->frame_no);
}

/*-------------------------------------------------------------------------*
* HC functions
*-------------------------------------------------------------------------*/

/* reset the HC and BUS */

static int hc_reset (struct ohci_hcd *ohci)
{
u32 temp;

/* SMM owns the HC? not for long!
* On PA-RISC, PDC can leave IR set incorrectly; ignore it there.
*/
#ifndef __hppa__
if (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");

/* this timeout is arbitrary. we make it long, so systems
* depending on usb keyboards may be usable even if the
* BIOS/SMM code seems pretty broken.
*/
temp = 500; /* arbitrary: five seconds */

writel (OHCI_INTR_OC, &ohci->regs->intrenable);
writel (OHCI_OCR, &ohci->regs->cmdstatus);
while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
wait_ms (10);
if (--temp == 0) {
ohci_err (ohci, "USB HC TakeOver failed!\n");
return -1;
}
}
}
#endif

/* Disable HC interrupts */
writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);

ohci_dbg (ohci, "reset, control = 0x%x\n",
readl (&ohci->regs->control));

/* Reset USB (needed by some controllers); RemoteWakeupConnected
* saved if boot firmware (BIOS/SMM/...) told us it's connected
*/
ohci->hc_control = readl (&ohci->regs->control);
ohci->hc_control &= OHCI_CTRL_RWC; /* hcfs 0 = RESET */
writel (ohci->hc_control, &ohci->regs->control);
// flush those pci writes
(void) readl (&ohci->regs->control);
wait_ms (50);

/* HC Reset requires max 10 us delay */
writel (OHCI_HCR, &ohci->regs->cmdstatus);
temp = 30; /* ... allow extra time */
while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
if (--temp == 0) {
ohci_err (ohci, "USB HC reset timed out!\n");
return -1;
}
udelay (1);
}

/* now we're in the SUSPEND state ... must go OPERATIONAL
* within 2msec else HC enters RESUME
*
* ... but some hardware won't init fmInterval "by the book"
* (SiS, OPTi ...), so reset again instead. SiS doesn't need
* this if we write fmInterval after we're OPERATIONAL.
*/
writel (ohci->hc_control, &ohci->regs->control);
// flush those pci writes
(void) readl (&ohci->regs->control);

return 0;
}

/*-------------------------------------------------------------------------*/

#define FI 0x2edf /* 12000 bits per frame (-1) */
#define LSTHRESH 0x628 /* lowspeed bit threshold */

/* Start an OHCI controller, set the BUS operational
* enable interrupts
* connect the virtual root hub
*/
static int hc_start (struct ohci_hcd *ohci)
{
u32 mask, tmp;
struct usb_device *udev;
struct usb_bus *bus;

spin_lock_init (&ohci->lock);
disable (ohci);

/* Tell the controller where the control and bulk lists are
* The lists are empty now. */
writel (0, &ohci->regs->ed_controlhead);
writel (0, &ohci->regs->ed_bulkhead);

/* a reset clears this */
writel ((u32) ohci->hcca_dma, &ohci->regs->hcca);

/* force default fmInterval (we won't adjust it); init thresholds
* for last FS and LS packets, reserve 90% for periodic.
*/
writel ((((6 * (FI - 210)) / 7) << 16) | FI, &ohci->regs->fminterval);
writel (((9 * FI) / 10) & 0x3fff, &ohci->regs->periodicstart);
writel (LSTHRESH, &ohci->regs->lsthresh);

/* some OHCI implementations are finicky about how they init.
* bogus values here mean not even enumeration could work.
*/
if ((readl (&ohci->regs->fminterval) & 0x3fff0000) == 0
|| !readl (&ohci->regs->periodicstart)) {
ohci_err (ohci, "init err\n");
return -EOVERFLOW;
}

/* start controller operations */
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
writel (ohci->hc_control, &ohci->regs->control);
ohci->hcd.state = USB_STATE_RUNNING;

/* Choose the interrupts we care about now, others later on demand */
mask = OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_WDH;
writel (mask, &ohci->regs->intrstatus);
writel (mask, &ohci->regs->intrenable);

/* handle root hub init quirks ... */
tmp = roothub_a (ohci);
tmp &= ~(RH_A_PSM | RH_A_OCPM);
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
/* NSC 87560 and maybe others */
tmp |= RH_A_NOCP;
tmp &= ~(RH_A_POTPGT | RH_A_NPS);
} else {
/* hub power always on; required for AMD-756 and some
* Mac platforms, use this mode everywhere by default
*/
tmp |= RH_A_NPS;
}
writel (tmp, &ohci->regs->roothub.a);
writel (RH_HS_LPSC, &ohci->regs->roothub.status);
writel (0, &ohci->regs->roothub.b);
// flush those pci writes
(void) readl (&ohci->regs->control);

// POTPGT delay is bits 24-31, in 2 ms units.
mdelay ((roothub_a (ohci) >> 23) & 0x1fe);

/* connect the virtual root hub */
bus = hcd_to_bus (&ohci->hcd);
bus->root_hub = udev = usb_alloc_dev (NULL, bus);
ohci->hcd.state = USB_STATE_RUNNING;
if (!udev) {
disable (ohci);
ohci->hc_control &= ~OHCI_CTRL_HCFS;
writel (ohci->hc_control, &ohci->regs->control);
return -ENOMEM;
}

udev->speed = USB_SPEED_FULL;
if (hcd_register_root (&ohci->hcd) != 0) {
usb_put_dev (udev);
bus->root_hub = NULL;
disable (ohci);
ohci->hc_control &= ~OHCI_CTRL_HCFS;
writel (ohci->hc_control, &ohci->regs->control);
return -ENODEV;
}

return 0;
}

/*-------------------------------------------------------------------------*/

/* an interrupt happens */

static void ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ohci_regs *regs = ohci->regs;
int ints;

/* we can eliminate a (slow) readl() if _only_ WDH caused this irq */
if ((ohci->hcca->done_head != 0)
&& ! (le32_to_cpup (&ohci->hcca->done_head) & 0x01)) {
ints = OHCI_INTR_WDH;

/* cardbus/... hardware gone before remove() */
} else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
disable (ohci);
ohci_dbg (ohci, "device removed!\n");
return;

/* interrupt for some other device? */
} else if ((ints &= readl (&regs->intrenable)) == 0) {
return;
}

if (ints & OHCI_INTR_UE) {
disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
// e.g. due to PCI Master/Target Abort

ohci_dump (ohci, 1);
hc_reset (ohci);
}

if (ints & OHCI_INTR_WDH) {
if (HCD_IS_RUNNING(hcd->state))
writel (OHCI_INTR_WDH, &regs->intrdisable);
dl_done_list (ohci, dl_reverse_done_list (ohci), ptregs);
if (HCD_IS_RUNNING(hcd->state))
writel (OHCI_INTR_WDH, &regs->intrenable);
}

/* could track INTR_SO to reduce available PCI/... bandwidth */

/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
* when there's still unlinking to be done (next frame).
*/
spin_lock (&ohci->lock);
if (ohci->ed_rm_list)
finish_unlinks (ohci, le16_to_cpu (ohci->hcca->frame_no),
ptregs);
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HCD_IS_RUNNING(ohci->hcd.state))
writel (OHCI_INTR_SF, &regs->intrdisable);
spin_unlock (&ohci->lock);

if (HCD_IS_RUNNING(ohci->hcd.state)) {
writel (ints, &regs->intrstatus);
writel (OHCI_INTR_MIE, &regs->intrenable);
// flush those pci writes
(void) readl (&ohci->regs->control);
}
}

/*-------------------------------------------------------------------------*/

static void ohci_stop (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);

ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
ohci->hcd.state);
ohci_dump (ohci, 1);

if (HCD_IS_RUNNING(ohci->hcd.state))
hc_reset (ohci);

remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
pci_free_consistent (ohci->hcd.pdev, sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
}
}

/*-------------------------------------------------------------------------*/

// FIXME: this restart logic should be generic,
// and handle full hcd state cleanup

/* controller died; cleanup debris, then restart */
/* must not be called from interrupt context */

#ifdef CONFIG_PM
static int hc_restart (struct ohci_hcd *ohci)
{
int temp;
int i;

disable (ohci);
if (hcd_to_bus (&ohci->hcd)->root_hub)
usb_disconnect (&hcd_to_bus (&ohci->hcd)->root_hub);

/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;

/* no EDs to remove */
ohci->ed_rm_list = NULL;

/* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;

if ((temp = hc_reset (ohci)) < 0 || (temp = hc_start (ohci)) < 0) {
ohci_err (ohci, "can't restart, %d\n", temp);
return temp;
} else
ohci_dbg (ohci, "restart complete\n");
return 0;
}
#endif

/*-------------------------------------------------------------------------*/

#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC

MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_LICENSE ("GPL");

#ifdef CONFIG_PCI
#include "ohci-pci.c"
#endif

#ifdef CONFIG_SA1111
#include "ohci-sa1111.c"
#endif

#if !(defined(CONFIG_PCI) || defined(CONFIG_SA1111))
#error "missing bus glue for ohci-hcd"
#endif

Subversion Repositories shark

(root)/shark/branches/xen/drivers/usb/host/ohci-hcd.c @ 1681 - Rev 1618