Subversion Repositories shark

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * USB Serial Converter driver
 *
 *      Copyright (C) 1999 - 2003
 *          Greg Kroah-Hartman (greg@kroah.com)
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License as published by
 *      the Free Software Foundation; either version 2 of the License, or
 *      (at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 *
 * (03/26/2002) gkh
 *      removed the port->tty check from port_paranoia_check() due to serial
 *      consoles not having a tty device assigned to them.
 *
 * (12/03/2001) gkh
 *      removed active from the port structure.
 *      added documentation to the usb_serial_device_type structure
 *
 * (10/10/2001) gkh
 *      added vendor and product to serial structure.  Needed to determine device
 *      owner when the device is disconnected.
 *
 * (05/30/2001) gkh
 *      added sem to port structure and removed port_lock
 *
 * (10/05/2000) gkh
 *      Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
 *      fix bug with urb->dev not being set properly, now that the usb core
 *      needs it.
 *
 * (09/11/2000) gkh
 *      Added usb_serial_debug_data function to help get rid of #DEBUG in the
 *      drivers.
 *
 * (08/28/2000) gkh
 *      Added port_lock to port structure.
 *
 * (08/08/2000) gkh
 *      Added open_count to port structure.
 *
 * (07/23/2000) gkh
 *      Added bulk_out_endpointAddress to port structure.
 *
 * (07/19/2000) gkh, pberger, and borchers
 *      Modifications to allow usb-serial drivers to be modules.
 *
 *
 */



#ifndef __LINUX_USB_SERIAL_H
#define __LINUX_USB_SERIAL_H

#include <linux/config.h>

#define SERIAL_TTY_MAJOR        188     /* Nice legal number now */
#define SERIAL_TTY_MINORS       255     /* loads of devices :) */

#define MAX_NUM_PORTS           8       /* The maximum number of ports one device can grab at once */

#define USB_SERIAL_MAGIC        0x6702  /* magic number for usb_serial struct */
#define USB_SERIAL_PORT_MAGIC   0x7301  /* magic number for usb_serial_port struct */

/* parity check flag */
#define RELEVANT_IFLAG(iflag)   (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))

/**
 * usb_serial_port: structure for the specific ports of a device.
 * @magic: magic number for internal validity of this pointer.
 * @serial: pointer back to the struct usb_serial owner of this port.
 * @tty: pointer to the corresponding tty for this port.
 * @number: the number of the port (the minor number).
 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
 *      for this port.
 * @bulk_in_buffer: pointer to the bulk in buffer for this port.
 * @read_urb: pointer to the bulk in struct urb for this port.
 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
 *      port.
 * @bulk_out_buffer: pointer to the bulk out buffer for this port.
 * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
 * @write_urb: pointer to the bulk out struct urb for this port.
 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
 *      port.
 * @write_wait: a wait_queue_head_t used by the port.
 * @work: work queue entry for the line discipline waking up.
 * @open_count: number of times this port has been opened.
 *
 * This structure is used by the usb-serial core and drivers for the specific
 * ports of a device.
 */

struct usb_serial_port {
        int                     magic;
        struct usb_serial       *serial;
        struct tty_struct *     tty;
        unsigned char           number;

        unsigned char *         interrupt_in_buffer;
        struct urb *            interrupt_in_urb;
        __u8                    interrupt_in_endpointAddress;

        unsigned char *         bulk_in_buffer;
        struct urb *            read_urb;
        __u8                    bulk_in_endpointAddress;

        unsigned char *         bulk_out_buffer;
        int                     bulk_out_size;
        struct urb *            write_urb;
        __u8                    bulk_out_endpointAddress;

        wait_queue_head_t       write_wait;
        struct work_struct      work;
        int                     open_count;
        struct device           dev;
};
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)

/* get and set the port private data pointer helper functions */
static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
{
        return dev_get_drvdata(&port->dev);
}

static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
{
        dev_set_drvdata(&port->dev, data);
}

/**
 * usb_serial - structure used by the usb-serial core for a device
 * @magic: magic number for internal validity of this pointer.
 * @dev: pointer to the struct usb_device for this device
 * @type: pointer to the struct usb_serial_device_type for this device
 * @interface: pointer to the struct usb_interface for this device
 * @minor: the starting minor number for this device
 * @num_ports: the number of ports this device has
 * @num_interrupt_in: number of interrupt in endpoints we have
 * @num_bulk_in: number of bulk in endpoints we have
 * @num_bulk_out: number of bulk out endpoints we have
 * @vendor: vendor id of this device
 * @product: product id of this device
 * @port: array of struct usb_serial_port structures for the different ports.
 * @private: place to put any driver specific information that is needed.  The
 *      usb-serial driver is required to manage this data, the usb-serial core
 *      will not touch this.  Use usb_get_serial_data() and
 *      usb_set_serial_data() to access this.
 */

struct usb_serial {
        int                             magic;
        struct usb_device *             dev;
        struct usb_serial_device_type * type;
        struct usb_interface *          interface;
        unsigned char                   minor;
        unsigned char                   num_ports;
        unsigned char                   num_port_pointers;
        char                            num_interrupt_in;
        char                            num_bulk_in;
        char                            num_bulk_out;
        __u16                           vendor;
        __u16                           product;
        struct usb_serial_port *        port[MAX_NUM_PORTS];
        struct kobject                  kobj;
        void *                          private;
};
#define to_usb_serial(d) container_of(d, struct usb_serial, kobj)

#define NUM_DONT_CARE   (-1)

/* get and set the serial private data pointer helper functions */
static inline void *usb_get_serial_data (struct usb_serial *serial)
{
        return serial->private;
}

static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
{
        serial->private = data;
}

/**
 * usb_serial_device_type - a structure that defines a usb serial device
 * @owner: pointer to the module that owns this device.
 * @name: pointer to a string that describes this device.  This string used
 *      in the syslog messages when a device is inserted or removed.
 * @short_name: a pointer to a string that describes this device in
 *      KOBJ_NAME_LEN characters or less.  This is used for the sysfs interface
 *      to describe the driver.
 * @id_table: pointer to a list of usb_device_id structures that define all
 *      of the devices this structure can support.
 * @num_interrupt_in: the number of interrupt in endpoints this device will
 *      have.
 * @num_bulk_in: the number of bulk in endpoints this device will have.
 * @num_bulk_out: the number of bulk out endpoints this device will have.
 * @num_ports: the number of different ports this device will have.
 * @calc_num_ports: pointer to a function to determine how many ports this
 *      device has dynamically.  It will be called after the probe()
 *      callback is called, but before attach()
 * @probe: pointer to the driver's probe function.
 *      This will be called when the device is inserted into the system,
 *      but before the device has been fully initialized by the usb_serial
 *      subsystem.  Use this function to download any firmware to the device,
 *      or any other early initialization that might be needed.
 *      Return 0 to continue on with the initialization sequence.  Anything
 *      else will abort it.
 * @attach: pointer to the driver's attach function.
 *      This will be called when the struct usb_serial structure is fully set
 *      set up.  Do any local initialization of the device, or any private
 *      memory structure allocation at this point in time.
 * @shutdown: pointer to the driver's shutdown function.  This will be
 *      called when the device is removed from the system.
 *
 * This structure is defines a USB Serial device.  It provides all of
 * the information that the USB serial core code needs.  If the function
 * pointers are defined, then the USB serial core code will call them when
 * the corresponding tty port functions are called.  If they are not
 * called, the generic serial function will be used instead.
 */

struct usb_serial_device_type {
        struct module *owner;
        char    *name;
        char    *short_name;
        const struct usb_device_id *id_table;
        char    num_interrupt_in;
        char    num_bulk_in;
        char    num_bulk_out;
        char    num_ports;

        struct list_head        driver_list;
        struct device_driver    driver;

        int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
        int (*attach) (struct usb_serial *serial);
        int (*calc_num_ports) (struct usb_serial *serial);

        void (*shutdown) (struct usb_serial *serial);

        int (*port_probe) (struct usb_serial_port *port);
        int (*port_remove) (struct usb_serial_port *port);

        /* serial function calls */
        int  (*open)            (struct usb_serial_port *port, struct file * filp);
        void (*close)           (struct usb_serial_port *port, struct file * filp);
        int  (*write)           (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
        int  (*write_room)      (struct usb_serial_port *port);
        int  (*ioctl)           (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
        void (*set_termios)     (struct usb_serial_port *port, struct termios * old);
        void (*break_ctl)       (struct usb_serial_port *port, int break_state);
        int  (*chars_in_buffer) (struct usb_serial_port *port);
        void (*throttle)        (struct usb_serial_port *port);
        void (*unthrottle)      (struct usb_serial_port *port);
        int  (*tiocmget)        (struct usb_serial_port *port, struct file *file);
        int  (*tiocmset)        (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);

        void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
        void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
        void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
};
#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver)

extern int  usb_serial_register(struct usb_serial_device_type *new_device);
extern void usb_serial_deregister(struct usb_serial_device_type *device);
extern void usb_serial_port_softint(void *private);

extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
extern void usb_serial_disconnect(struct usb_interface *iface);

extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);

/* USB Serial console functions */
#ifdef CONFIG_USB_SERIAL_CONSOLE
extern void usb_serial_console_init (int debug, int minor);
extern void usb_serial_console_exit (void);
#else
static inline void usb_serial_console_init (int debug, int minor) { }
static inline void usb_serial_console_exit (void) { }
#endif

/* Functions needed by other parts of the usbserial core */
extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
extern int usb_serial_generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
extern int usb_serial_generic_write_room (struct usb_serial_port *port);
extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
extern void usb_serial_generic_shutdown (struct usb_serial *serial);
extern int usb_serial_generic_register (int debug);
extern void usb_serial_generic_deregister (void);

extern int usb_serial_bus_register (struct usb_serial_device_type *device);
extern void usb_serial_bus_deregister (struct usb_serial_device_type *device);

extern struct usb_serial_device_type usb_serial_generic_device;
extern struct bus_type usb_serial_bus_type;
extern struct tty_driver *usb_serial_tty_driver;

/* Inline functions to check the sanity of a pointer that is passed to us */
static inline int serial_paranoia_check (struct usb_serial *serial, const char *function)
{
        if (!serial) {
                dbg("%s - serial == NULL", function);
                return -1;
        }
        if (serial->magic != USB_SERIAL_MAGIC) {
                dbg("%s - bad magic number for serial", function);
                return -1;
        }
        if (!serial->type) {
                dbg("%s - serial->type == NULL!", function);
                return -1;
        }

        return 0;
}


static inline int port_paranoia_check (struct usb_serial_port *port, const char *function)
{
        if (!port) {
                dbg("%s - port == NULL", function);
                return -1;
        }
        if (port->magic != USB_SERIAL_PORT_MAGIC) {
                dbg("%s - bad magic number for port", function);
                return -1;
        }
        if (!port->serial) {
                dbg("%s - port->serial == NULL", function);
                return -1;
        }

        return 0;
}


static inline struct usb_serial* get_usb_serial (struct usb_serial_port *port, const char *function)
{
        /* if no port was specified, or it fails a paranoia check */
        if (!port ||
                port_paranoia_check (port, function) ||
                serial_paranoia_check (port->serial, function)) {
                /* then say that we don't have a valid usb_serial thing, which will
                 * end up genrating -ENODEV return values */

                return NULL;
        }

        return port->serial;
}


static inline void usb_serial_debug_data (const char *file, const char *function, int size, const unsigned char *data)
{
        int i;

        if (!debug)
                return;
       
        printk (KERN_DEBUG "%s: %s - length = %d, data = ", file, function, size);
        for (i = 0; i < size; ++i) {
                printk ("%.2x ", data[i]);
        }
        printk ("\n");
}


/* Use our own dbg macro */
#undef dbg
#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)



#endif  /* ifdef __LINUX_USB_SERIAL_H */