WebSVN - shark - Rev 3 - /shark/trunk/drivers/block/ide.c

/*
* Project: S.Ha.R.K.
*
* Coordinators:
* Giorgio Buttazzo <giorgio@sssup.it>
* Paolo Gai <pj@gandalf.sssup.it>
*
* Authors :
* Paolo Gai <pj@gandalf.sssup.it>
* Massimiliano Giorgi <massy@gandalf.sssup.it>
* Luca Abeni <luca@gandalf.sssup.it>
* (see the web pages for full authors list)
*
* ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
*
* http://www.sssup.it
* http://retis.sssup.it
* http://shark.sssup.it
*/

/***************************************

CVS : $Id: ide.c,v 1.1.1.1 2002-03-29 14:12:49 pj Exp $

Revision: $Revision: 1.1.1.1 $

Last update: $Date: 2002-03-29 14:12:49 $

This module contains IDE initialization, IDE glue between
the "block device" module and the IDE low level module and some
usefull function used by the low level module.

***************************************/

/*
* Copyright (C) 19992,2000 Massimiliano Giorgi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/

#include "glue.h"

#include <fs/sysmacro.h>
#include <fs/major.h>
#include <fs/magic.h>
#include <fs/bdevinit.h>
#include <fs/assert.h>
#include <fs/maccess.h>
#include <fs/assert.h>

#include "sysind.h"
#include "bdev.h"
#include "phdsk.h"
#include "lodsk.h"
#include "ide.h"
#include "idereq.h"

/*
* FLAGS
*/

/*+ if defined: scan for device on interface also if soft reset fail +*/
#define FORCE_SCANNING 1
//#undef FORCE_SCANNING

/*+ if defined: use PIO (polled) I/O on all interfaces, disable DMA +*/
#define FORCE_PIOMODE 1
//#undef FORCE_PIOMODE

/*+ if 1: search only master device (no slave) +*/
/*+ if 0: search master and slave device +*/
#define ONLY_MASTER 1

/*
* DEBUG
*/

/*+ if defined: trace initialization ++*/
#define TRACE_INIT KERN_DEBUG
#undef TRACE_INIT

/*+ if defined: trace ide_scan() [to find devices] +*/
#define TRACE_IDESCAN KERN_DEBUG
#undef TRACE_IDESCAN

/*+ if defined: trace ide_scandisk() [to find logical layout] +*/
#define TRACE_IDESCANDEV KERN_DEBUG
#undef TRACE_IDESCANDEV

/**/

/*+ these are debug macros... +*/

#ifdef TRACE_INIT
#define printk0(fmt,args...) \
printk(TRACE_INIT "ide_init: " fmt,##args)
#else
#define printk0(fmt,args...)
#endif

#ifdef TRACE_IDESCAN
#define printk1(fmt,args...) \
printk(TRACE_IDESCAN "ide_scan: " fmt,##args)
#else
#define printk1(fmt,args...)
#endif

#ifdef TRACE_IDESCANDEV
#define printk2(fmt,args...) \
printk(TRACE_IDESCANDEV "ide_scandisk: " fmt,##args)
#else
#define printk2(fmt,args...)
#endif

/*
*
*
*/

/*+ Name used by this block device +*/
static char device_name[]="ide";

// /dev/ide/hd-i0mp1

/*+ Mantains informatio about a single interface +*/
/* warning: must not cross 4KBytes boundaries (required for DMA operations) */
struct ideinfo ide[MAXIDEINTERFACES]={{0}};
//struct ideinfo ide[MAXIDEINTERFACES] __attribute__((nocommon));
//struct ideinfo ide[MAXIDEINTERFACES] __attribute__((section("ide_section")))=
//{0};

/*+ Mantains information about every physical device +*/
static struct ideminorinfo mtable[MAXIDEMINOR];

/*
*
*
*
*/

//#ifndef NDEBUG
void ide_dump_status(void)
{
int i;

printk(KERN_INFO "ide block device status:");
for (i=0;i<MAXIDEINTERFACES;i++)
if (!is_ide_free(i)) {
printk(KERN_INFO " ide%i:",i);
printk(KERN_INFO " errors: %i",ide[i].errors);
}
}
//#endif

/*
* how parameters are mapped to device minor number:
*
* 7 6 5 4 3 2 1 0
* ---------------------------------
* I . . I I . . . I
* ---------------------------------
* ^ ^ ^
* I I I-- logical disk (aka partition)
* I I------------ drive id (aka master,slave)
* I-------------------- interface
*/

/*++++++++++++++++++++++++++++++++++++++

Convert an interface id, driver id, logical disk to a device id.

__dev_t idemakedev
return a device id

int ideif
ide interface sequential number

int drv
ide channel (IDE_MASTER, IDE_SLAVE)

int lodsk
logical disk (aka partition) on than device
++++++++++++++++++++++++++++++++++++++*/

static __inline__ __dev_t idemakedev(int ideif,int drv,int lodsk)
{
return makedev(MAJOR_B_IDE,((ideif&0x7)<<5)|((drv&0x1)<<4)|(lodsk&0xf));
}

/*++++++++++++++++++++++++++++++++++++++

Extract an interface id from a device id.

int idehwif
return an interface id

__dev_t dev
device id to parse
++++++++++++++++++++++++++++++++++++++*/

static __inline__ int idehwif(__dev_t dev)
{
return minor(dev)>>5;
}

/*++++++++++++++++++++++++++++++++++++++

Extract a drive id from a device id.

int idedriveid
return a device id

__dev_t dev
device id to parse
++++++++++++++++++++++++++++++++++++++*/

static __inline__ int idedriveid(__dev_t dev)
{
return (minor(dev)&0x10)?1:0;
}

/*++++++++++++++++++++++++++++++++++++++

Extract a logical disk id from a device id.

int idelodsk
return a logical disk id

__dev_t dev
device id to parse
++++++++++++++++++++++++++++++++++++++*/

static __inline__ int idelodsk(__dev_t dev)
{
return minor(dev)&0xf;
}

/*++++++++++++++++++++++++++++++++++++++

Extract the minor part of a device number.

int idemindex
return a device minor number

__dev_t dev
device id to parse
++++++++++++++++++++++++++++++++++++++*/

static __inline__ int idemindex(__dev_t dev)
{
return minor(dev);
}

/*++++++++++++++++++++++++++++++++++++++

Parse a device minor number from a device id and a logical disk id.

int idemindexext
return a device minor number

__dev_t dev
device id to parse

int lodsk
logical disk id to parse
++++++++++++++++++++++++++++++++++++++*/

static __inline__ int idemindexext(__dev_t dev, int lodsk)
{
return minor(dev)+(lodsk&0xf);
}

/* --- */

//#ifndef NDEBUG
int ide_dump_startsize(__dev_t dev, __blkcnt_t *start, __blkcnt_t *size)
{
int i;
if (major(dev)!=MAJOR_B_IDE) return -1;
i=idemindex(dev);
if (mtable[i].used) {
*start=mtable[i].start;
*size=mtable[i].size;
return 0;
}
return -1;
}
//#endif

/*
*
* to manage struct ata_diskid
*
*/

/*++++++++++++++++++++++++++++++++++++++

Dump, using printk(), the "important" information returned by an ide
device in response to an ATA IDENTIFY request.

struct ata_diskid *ptr
pointer to the structure returned by an IDENTIFY command

struct ide_diskinfo *info
pointer to the disk information structure (build decoding an
ata_diskid structure)
++++++++++++++++++++++++++++++++++++++*/

static void ide_dump_diskid(struct ata_diskid *ptr,
struct ide_diskinfo *info)
{
char atabuf[256];
int i,j;

if (is_ATA4(ptr)||is_ATA3(ptr)||is_ATA2(ptr)||is_ATA(ptr)) {
i=0;
if (is_ATA(ptr)) {
atabuf[i++]='1';
atabuf[i++]=' ';
}
if (is_ATA2(ptr)) {
atabuf[i++]='2';
atabuf[i++]=' ';
}
if (is_ATA3(ptr)) {
atabuf[i++]='3';
atabuf[i++]=' ';
}
if (is_ATA4(ptr)) {
atabuf[i++]='4';
atabuf[i++]=' ';
}
atabuf[i++]='\0';
} else
/* actualy only ATA disk are recognized */
sprintf(atabuf,"?");

printk(IDELOG " device : hard disk");
printk(IDELOG " model : %s",ptr->model);
printk(IDELOG " serial : %s",ptr->serial);
printk(IDELOG " firmware rev : %s",ptr->firmware);
printk(IDELOG " default C/H/S : %i/%i/%i",
ptr->def_cyls,ptr->def_heads,ptr->def_sects);
printk(IDELOG " total capacity : ~%4.3f GBytes",
(double)ptr->lba_capacity/(1024.0*1024.0*2.0));
printk(IDELOG " ATA : %s",atabuf);
printk(IDELOG " LBA : %s",is_LBAcapable(ptr)?"yes":"no");

i=0;
if (info->max_pio_mode<0) strcpy(atabuf,"none");
else {
for (j=info->max_pio_mode;j>=0;j--) {
strcpy(atabuf+i,"pio"); i+=3;
atabuf[i++]=j+'0';
atabuf[i++]=' ';
}
atabuf[i++]='\0';
}
printk(IDELOG " PIO modes : %s",atabuf);

i=0;
if (info->max_dma_mode<0) strcpy(atabuf,"none");
else {
for (j=info->max_dma_mode;j>=0;j--) {
strcpy(atabuf+i,"mword"); i+=5;
atabuf[i++]=j+'0';
atabuf[i++]=' ';
}
atabuf[i++]='\0';
}
printk(IDELOG " DMA modes : %s",atabuf);

i=0;
if (info->max_udma_mode<0) strcpy(atabuf,"none");
else {
for (j=info->max_udma_mode;j>=0;j--) {
strcpy(atabuf+i,"udma"); i+=4;
atabuf[i++]=j+'0';
atabuf[i++]=' ';
}
atabuf[i++]='\0';
}
printk(IDELOG " UDMA modes : %s",atabuf);
}

/*++++++++++++++++++++++++++++++++++++++

Dump, using printk(), the "important" information returned by an ide
device in response to an ATAPI PACKET IDENTIFY request.

struct atapi_diskid *ptr
pointer to the structure returned by a PACKET IDENTIFY command
++++++++++++++++++++++++++++++++++++++*/

static void ide_dump_atapidiskid(struct atapi_diskid *ptr)
{
char atabuf[16];
//__uint8_t *p;
char *dev;
int i=0;

if (is_ATAPIdevice(ptr)) {
strcpy(atabuf,"ATAPI ");
i=6;
}

if (is_ATA4(ptr)||is_ATA3(ptr)||is_ATA2(ptr)||is_ATA(ptr)) {
if (is_ATA(ptr)) {
atabuf[i++]='1';
atabuf[i++]=' ';
}
if (is_ATA2(ptr)) {
atabuf[i++]='2';
atabuf[i++]=' ';
}
if (is_ATA3(ptr)) {
atabuf[i++]='3';
atabuf[i++]=' ';
}
if (is_ATA4(ptr)) {
atabuf[i++]='4';
atabuf[i++]=' ';
}
atabuf[i++]='\0';
} else {
/* actualy only ATA disk are recognized */
atabuf[i++]='?';
atabuf[i++]='\0';
}

if (is_directdev(ptr)) dev="direct";
else if (is_sequentialdev(ptr)) dev="sequential";
else if (is_printerdev(ptr)) dev="printer";
else if (is_processordev(ptr)) dev="processor";
else if (is_writeoncedev(ptr)) dev="write once";
else if (is_cdromdev(ptr)) dev="cd-rom";
else if (is_scannerdev(ptr)) dev="scanner";
else if (is_opticalmemorydev(ptr)) dev="optical memory";
else if (is_mediachengerdev(ptr)) dev="media changer";
else if (is_communicatordev(ptr)) dev="communicator";
else if (is_arraydev(ptr)) dev="array";
else dev="?";

printk(IDELOG " device : %s",dev);
printk(IDELOG " model : %s",ptr->model);
printk(IDELOG " serial : %s",ptr->serial);
printk(IDELOG " firmware rev : %s",ptr->firmware);
printk(IDELOG " ATA : %s",atabuf);
}

/*
*
* Interface the "block device" module to the low-level routine
*
*/

/*
void dump_buffer(__uint8_t *buf)
{
int i;
for (i=0;i<512;i++) {
cprintf("%02x ",(int)*(buf+i));
if (i%16==15) cprintf("\n");
}
}
*/

/*++++++++++++++++++++++++++++++++++++++

Try to lock a device.
(A device can be locked if the device is a partition and the whole
disk is not locked or if the device is the whole disk and any partititions
have been locked).

int ide_trylock
return ?_ERR on error, ?_OK on success and, ?_CANT on failure

__devt_t device
device to use
++++++++++++++++++++++++++++++++++++++*/

static int ide_trylock(__dev_t device)
{
int i,ind,ind2;

ind=idemindex(device);
assertk(ind>=0&&ind<MAXIDEMINOR);

if (!mtable[ind].used) return TRYLOCK_ERR;

if (mtable[ind].blocked) return TRYLOCK_CANT;

if (idelodsk(device)==0) {
for (i=1;;i++) {
ind2=idemindex(idemakedev(idehwif(device),idedriveid(device),i));
assertk(ind2>=0&&ind2<MAXIDEMINOR);
if (ind2==ind) {
mtable[ind].blocked=1;
return TRYLOCK_OK;
}
if (!mtable[ind2].used) continue;
if (mtable[ind2].blocked) return TRYLOCK_CANT;
}
}

ind2=idemindex(idemakedev(idehwif(device),idedriveid(device),0));
assertk(ind2>=0&&ind2<MAXIDEMINOR);
assertk(mtable[ind2].used==1);

if (mtable[ind2].blocked) return TRYLOCK_CANT;

mtable[ind].blocked=1;
return TRYLOCK_OK;
}

static int ide_tryunlock(__dev_t device)
{
int ind;

ind=idemindex(device);
assertk(ind>=0&&ind<MAXIDEMINOR);

if (!mtable[ind].used) return TRYUNLOCK_ERR;
if (!mtable[ind].blocked) return TRYUNLOCK_ERR;
mtable[ind].blocked=0;
return TRYUNLOCK_OK;
}

/*++++++++++++++++++++++++++++++++++++++

Read a block of data (sector) from a device into a buffer.

int bd_ide_read
return 0 on success, other values on error

__dev_t device
device id to read from

__blkcnt_t blocknum
block number to read

__uint8_t *buffer
buffer for the readed data
++++++++++++++++++++++++++++++++++++++*/

static int bd_ide_read(__dev_t device, __blkcnt_t blocknum, __uint8_t *buffer)
{
register int ideif=idehwif(device);
register int index=idemindex(device);
int res;

magic_assert(ide[ideif].magic,IDE_MAGIC,
"ide%i: interface overwritten",ideif);
magic_assert(mtable[index].magic,IDE_MAGIC_MINOR,
"ide%i: minor %i overwritten",ideif,minor(device));

if (major(device)!=MAJOR_B_IDE) {
printk(IDEERRLOG "ide%i: major %i is not EIDE",ideif,major(device));
return -1;
}

if (minor(device)>MAXIDEMINOR) {
printk(IDEERRLOG "ide%i: minor %i out of range",ideif,minor(device));
return -1;
}

if (!mtable[index].used) {
printk(IDEERRLOG "ide%i: minor %i not present",ideif,minor(device));
return -1;
}

//cprintf("index=%i\n",index);
//cprintf("blocknum=%li\n",(long)blocknum);
//cprintf("size=%li\n",(long)mtable[index].size);
//cprintf("start=%li\n",(long)mtable[index].start);
//cprintf("sizeof(size)=%i\n",sizeof(mtable[index].size));

/*
if (blocknum<0||blocknum>=mtable[index].size) {
printk(IDEERRLOG "ide%i: request block out of range",ideif);
return -1;
}
*/

res=ide_read(ideif,idedriveid(device),
mtable[index].start+blocknum,
buffer);

//if (blocknum==0x9ea19)
// dump_buffer(buffer);

//cprintf("index=%i\n",index);
//cprintf("blocknum=%li\n",(long)blocknum);
//cprintf("size=%li\n",(long)mtable[index].size);
//cprintf("sizeof(size)=%i\n\n",sizeof(mtable[index].size));

return res;
}

/*++++++++++++++++++++++++++++++++++++++

Move the head on a specified cylinder.

int bd_ide_seek
return 0 on success, other values on error

__dev_t device
device id to read from

__blkcnt_t blocknum
block number to moving into
++++++++++++++++++++++++++++++++++++++*/

static int bd_ide_seek(__dev_t device, __blkcnt_t blocknum)
{
register int ideif=idehwif(device);
register int index=idemindex(device);
int res;

magic_assert(ide[ideif].magic,IDE_MAGIC,
"ide%i: interface overwritten",ideif);
magic_assert(mtable[index].magic,IDE_MAGIC_MINOR,
"ide%i: minor %i overwritten",ideif,minor(device));

if (major(device)!=MAJOR_B_IDE) {
printk(IDEERRLOG "ide%i: major %i is not EIDE",ideif,major(device));
return -1;
}

if (minor(device)>MAXIDEMINOR) {
printk(IDEERRLOG "ide%i: minor %i out of range",ideif,minor(device));
return -1;
}

if (!mtable[index].used) {
printk(IDEERRLOG "ide%i: minor %i not present",ideif,minor(device));
return -1;
}

res=ide_seek(ideif,idedriveid(device),
mtable[index].start+blocknum);

return res;
}

/*++++++++++++++++++++++++++++++++++++++

Write a block of data (sector) from a buffer into a device (not yet
implemented, return always error).

int bd_ide_write
return 0 on success, other value on errors

__dev_t device
device id to write into

__blkcnt_t blocknum
block number to write

__uint8_t *buffer
buffer to write into
++++++++++++++++++++++++++++++++++++++*/

static int bd_ide_write(__dev_t device, __blkcnt_t blocknum, __uint8_t *buffer)
{
register int ideif=idehwif(device);
register int index=idemindex(device);
int res;

magic_assert(ide[ideif].magic,IDE_MAGIC,
"ide%i: interface overwritten",ideif);
magic_assert(mtable[index].magic,IDE_MAGIC_MINOR,
"ide%i: minor %i overwritten",ideif,minor(device));

if (major(device)!=MAJOR_B_IDE) {
printk(IDEERRLOG "ide%i: major %i is not EIDE",ideif,major(device));
return -1;
}

if (minor(device)>MAXIDEMINOR) {
printk(IDEERRLOG "ide%i: minor %i out of range",ideif,minor(device));
return -1;
}

if (!mtable[index].used) {
printk(IDEERRLOG "ide%i: minor %i not present",ideif,minor(device));
return -1;
}

res=ide_write(ideif,idedriveid(device),
mtable[index].start+blocknum,
buffer);

return res;
}

/*
*
* Initialization
*
*/

/*+ Data used to register the IDE module to the block device manager +*/
static struct block_device_operations ide_operations={
ide_trylock,
ide_tryunlock,
bd_ide_read,
bd_ide_seek,
bd_ide_write
};

/* this information are saved from the initialization routine for
* futher reference
*/

/*+ initialization parameter (for the "glue" initialization) +*/
void *ide_parm_initserver=NULL;

/*+ show information during startup? +*/
int ide_showinfo_flag=0;

/*++++++++++++++++++++++++++++++++++++++

This function try to register an IDE interface, scan for device and
identify the logical struct of the device

int ide_tryregister
return 0 on successe <0 on error

int port0
first port of the ide interface (ide port)

int port1
second port of the ide interface (control port)

int irq
irq of the ide interface

int dma
dma 16bits channel (if using not bus master mode)

int bmdma
port for the bus master dma operations
++++++++++++++++++++++++++++++++++++++*/

static int ide_tryregister(int port0, int port1, int irq, int dma, int bmdma)
{
int ideif,res,j;

ideif=ide_register(port0,port1,irq,dma,bmdma);
printk0("registering IDE at 0x%04x,0x%04x,%i,%i,0x%04x... ",
port0,port1,irq,dma,bmdma);
if (ideif>=0) {
res=ide_scan(ideif);
printk0("found %i peripheral(s)",res);
if (res>0) {
for (j=IDE_MASTER;j<=IDE_SLAVE;j++) {
if (ide[ideif].pdisk[j]!=NULL) {
printk0("scanning %s for logical layout",
j==IDE_MASTER?"master":"slave");
ide_scandisk(ideif,j);
}
}
return 0;
}
return -1;
} else
printk0("registering failed");
return -2;
}

/*++++++++++++++++++++++++++++++++++++++

This function parse a string to find "command line options" for the
IDE subsystem; see source for comments.

int ide_scanparms
return 0 on success, other values on error

char *str
string to parse
++++++++++++++++++++++++++++++++++++++*/

static int ide_scanparms(char *str)
{
int port0,port1,irq,dma=-1,bmdma=-1;
char *ptr;
int ret;

/* available string options:

ide=port,sec_port,irq
example
"ide=0x1f0,0x3f0,14"

try to register this ide interface
*/

printk0("(start) searching for parameters");
if (str==NULL) {
printk0("(end) searching for parameters");
return 0;
}

ptr=str;
for (;;) {
ptr=strscn(ptr,"ide=");
if (ptr==NULL) return 0;
ret=sscanf(ptr,"ide=%x,%x,%i,%i,%x",&port0,&port1,&irq,&dma,&bmdma);
if (ret==3||ret==5) {
{
int len;
char *s;
s=strchr(ptr,' ');
if (s!=NULL) len=s-ptr+1;
else len=strlen(ptr);
memset(ptr,len,' ');
}
ide_tryregister(port0,port1,irq,dma,bmdma);
}
ptr++;
}
printk0("(end) searching for parameters");
return 0;
}

/*++++++++++++++++++++++++++++++++++++++

This function initialize the IDE subsystem; must be called before every
other function.

It initialize internal data structure, register itself to the bdev
(block dev) manager and try to initialize "standard" IDE interface;
non-standard ide interface can be initialize using the struct IDE_PARMS
(see include/fs/fsinit.h).

int ide_init
return 0 on success, other on failure

BDEV_PARMS *parms
pointer to a structure contains general and specific initialization
data
++++++++++++++++++++++++++++++++++++++*/

int ide_init(BDEV_PARMS *parms)
{
struct block_device bd;
__uint32_t addr;
int res;
int i;

printk0("START");

init_idereq();
printk0("init_idereq()... done");

for (i=0;i<MAXIDEINTERFACES;i++) {

magic_set(ide[i].magic,IDE_MAGIC);

ide[i].server=NIL;
ide[i].io_port=0;
ide[i].io_port2=0;
ide[i].irq=0;
ide[i].pdisk[IDE_MASTER]=NULL;
ide[i].info[IDE_MASTER].use_lba=0;
ide[i].pdisk[IDE_SLAVE]=NULL;
ide[i].info[IDE_SLAVE].use_lba=0;
//ide[i].reqhead=NIL;
//ide[i].reqtail=NIL;
ide[i].errors=0;

/* some check on the ide[].prd struct */
addr=__lin_to_phy(ide[i].prd);

/* must be 32bits aligned! */
assertk((addr&3)==0); /* this is granted by aligned(4) of the struct */

/* must not cross 4KBytes boundaries! */
if ((addr&0xfffff000)!=((addr+sizeof(ide[i].prd)-1)&0xfffff000)) {
printk(KERN_EMERG "ide[%i].prd cross 4Kbytes boundary!",i);
printk(KERN_EMERG "ide[] table is located at 0x%08lx",(long)&ide);
printk(KERN_EMERG "ide[%i] is located at 0x%08lx",
i,(long unsigned)(&ide[i]));
printk(KERN_EMERG "ide[%i].prd is located at 0x%08lx",
i,(long unsigned)(&ide[i].prd));
printk(KERN_EMERG "ide[%i].prd is located at 0x%08lx (phy) for 0x%04x",
i,(long unsigned)addr,(int)sizeof(ide[i].prd));

/* now! */
assertk(0==-1);
}

}

for (i=0;i<MAXIDEMINOR;i++) {

magic_set(mtable[i].magic,IDE_MAGIC_MINOR);

mtable[i].start=0;
mtable[i].size=0;
mtable[i].used=0;
mtable[i].blocked=0;
}

ide_parm_initserver=IDEPARMS(parms).parm_initserver;
ide_showinfo_flag=parms->showinfo;
bd.bd_sectorsize=IDE_SECTOR_SIZE;
bd.bd_op=&ide_operations;

printk0("static data initialization... done");

res=bdev_register(makedev(MAJOR_B_IDE,0),device_name,&bd);
if (res) return -1;

printk0("registering IDE to block-dev... done");

/* Well... bus master dma operations i/o ports would be reported
* by the pci device management module
*/
ide_tryregister(0x1f0,0x3f0,14,3,0xe000);
ide_tryregister(0x170,0x370,15,-1,0xe008);

ide_scanparms(parms->config);

printk0("END");
return 0;
}

/*
*
*
*/

/*++++++++++++++++++++++++++++++++++++++

Scan for device on an IDE interface: reset the device, issue a
IDENTIFY command and optional a PACKET IDENTIFY; if a hard disk
is found it is registered to the "physical disk" module.

int ide_scan
return the number of device found on the interface (0,1 or 2)

int ideif
the interface to scan (every interface has a progess number)
++++++++++++++++++++++++++++++++++++++*/

int ide_scan(int ideif)
{
struct ata_diskid info;
struct atapi_diskid info2;
struct phdskinfo disk;
struct phdskinfo *phdskptr;
int drv;
int res;
//int ind;
int found;
int atapi;
int fl;

printk1("START");

magic_assert(ide[ideif].magic,IDE_MAGIC,
"ide: interface(%i) overwritten",ideif);

if (ide[ideif].pdisk[IDE_MASTER]!=NULL||
ide[ideif].pdisk[IDE_SLAVE]!=NULL)
return 0;

/* phase 0 */
/* softreset */

printk1("making a soft reset...");
res=do_ide_softreset(ideif);
if (res) {
printk1("soft reset fail");
#ifndef FORCE_SCANNING
printk1("END");
return 0;
#endif
printk1("FORCE_SCANNING");
} else
printk1("soft reset... done");

/* phase 1 */
/* searching for disk drive */

found=0;
for (drv=IDE_MASTER;drv<=(ONLY_MASTER?IDE_MASTER:IDE_SLAVE);drv++) {

printk1("scanning for %s",drv==IDE_MASTER?"master":"slave");

atapi=0;
res=ide_identify(ideif,drv,&info);

printk1("identify... done (device %sfound)",res==IDE_OK?"":"NOT ");

if (res!=IDE_OK) {
atapi=1;
res=ide_pidentify(ideif,drv,&info2);
printk1("pidentify... done (device %sfound)",res==IDE_OK?"":"NOT ");
}

if (res==IDE_OK) {

if (ide_showinfo_flag&&!found) {
printk(IDELOG "ide%i: 0x%3x,%i,%i,0x%04x",ideif,
ide[ideif].io_port,ide[ideif].irq,
(ide[ideif].dma==255)?-1:ide[ideif].dma,
ide[ideif].io_bmdma);
}
found++;

/* if this is an ATAPI device... */
if (atapi) {
if (ide_showinfo_flag) {
printk(IDELOG "ide%i: %s device",
ideif,drv==IDE_MASTER?"master":"slave");
ide_dump_atapidiskid(&info2);
}
/* ATAPI devices not managed yet! */
continue;
}

disk.pd_device=idemakedev(ideif,drv,0);

disk.pd_sectsize=IDE_SECTOR_SIZE;
disk.pd_size=(__uint32_t)info.act_cyls*info.act_heads*info.act_sects;

disk.pd_logeom.cyls=disk.pd_phgeom.cyls=info.act_cyls;
disk.pd_logeom.heads=disk.pd_phgeom.heads=info.act_heads;
disk.pd_logeom.sectors=disk.pd_phgeom.sectors=info.act_sects;

if (is_LBAcapable(&info)) {
ide[ideif].info[drv].use_lba=TRUE;
disk.pd_ide_check_geom=0;
} else {
ide[ideif].info[drv].use_lba=FALSE;
disk.pd_ide_check_geom=0;
}

/* for PIO capabilities */
{
__int8_t support;
if (info.fields_valid&2) {
if (info.eide_PIO_modes&2) support=4;
else if (info.eide_PIO_modes&1) support=3;
else support=info.PIO_mode;
} else
support=info.PIO_mode;
ide[ideif].info[drv].max_pio_mode=support;
}
/* for DMA capabilities */
{
__int8_t support;
if (info.DMA_mword&4) support=2;
else if (info.DMA_mword&2) support=1;
else if (info.DMA_mword&1) support=0;
else support=-1;
ide[ideif].info[drv].max_dma_mode=support;
}
/* for ULTRA DMA capabilities */
{
__int8_t support;
if (!(info.fields_valid&4)) support=-1;
else if (info.UDMA_cap&4) support=2;
else if (info.UDMA_cap&2) support=1;
else if (info.UDMA_cap&1) support=0;
else support=-1;
ide[ideif].info[drv].max_udma_mode=support;
}

/* Well... BM-DMA used by default (if possible)*/
ide[ideif].info[drv].use_dma=0;
fl=0;
if (ide[ideif].info[drv].max_dma_mode!=-1) fl=1;
if (ide[ideif].info[drv].max_udma_mode!=-1) fl=1;
#ifdef FORCE_PIOMODE
fl=0; // so use PIO mode
#endif
ide[ideif].info[drv].use_bm_dma=fl;

/* Show informations... if request */
if (ide_showinfo_flag) {
printk(IDELOG "ide%i: %s device",
ideif,drv==IDE_MASTER?"master":"slave");
ide_dump_diskid(&info,&ide[ideif].info[drv]);
}

sprintf(disk.pd_name,"hd%c",'a'+ideif*2+drv);

/* Register physical disk information */
phdskptr=phdsk_register(&disk);
if (phdskptr==NULL) continue;
ide[ideif].pdisk[drv]=phdskptr;

/* Well, the queueing algorithm must know the physical disk layout */
ide[ideif].queue[drv].disk=phdskptr;

/* Activate look a head... (if possible) */
res=ide_enablelookahead(ideif,drv);
if (ide_showinfo_flag)
printk(IDELOG "ide%i: look ahead %s for %s device",
ideif,
res==IDE_OK?"activated":"not activated",
drv==IDE_MASTER?"master":"slave"
);
}
}

if (found==0) {
printk(IDELOG "ide: no device found on 0x%x,%i, unregistering interface",
ide[ideif].io_port,ide[ideif].irq);

ide_unregister(ideif);

}

return found;
}

/* --- */

/*++++++++++++++++++++++++++++++++++++++

This function is called by the "logical disk" module to inform this module
that a logical disk partition is found [see ide_scandisk()].

int _callback
must return 0 to continue searching for new partition, -1 to stop
scanning

int ind
partition index (for linux users: it is the number after the device
name, ex. hda1, hdb5 )

struct lodskinfo *ptr
information on partition found

void *data
private data for this module: is a pointer to a __dev_t to identify
the device where this partition reside
++++++++++++++++++++++++++++++++++++++*/

static int _callback(int ind, struct lodskinfo *ptr, void *data)
{
char name[32];
int index;
__dev_t dev;

printk2("found logical device %i",ind);

assertk(ind>0);
if (ind>MAXIDELODSK) {
printk(IDELOG "ide: found more than %i partitions... skipped!",
MAXIDELODSK);
return -1;
}

index=idemindexext(*(__dev_t *)data,ind);
mtable[index].start=ptr->start;
mtable[index].size=ptr->size;
mtable[index].used=1;

dev=makedev(major(*(__dev_t *)data),index);
sprintf(name,"hd%c%i",
idehwif(dev)*2+idedriveid(dev)+'a',
ind
);

index=bdev_register_minor(dev,name,ptr->fs_ind);

return 0;
}

/*++++++++++++++++++++++++++++++++++++++

Scan an IDE device to find its logical structure; it use the service
from the "logical disk" module to perform this.

int ide_scandisk
return 0 on success, other on error

int hwif
ide interface where there is the device

int drv
device to scan (IDE_MASTER, IDE_SLAVE)

++++++++++++++++++++++++++++++++++++++*/

int ide_scandisk(int hwif, int drv)
{
char name[8];
__dev_t device;
int index;

printk2("START");

//cprintf("hwif=%i drv=%i\n",hwif,drv);
device=idemakedev(hwif,drv,0);
//cprintf("device=%i\n",(int)device);
index=idemindex(device);
//cprintf("minor=%i\n",(int)minor(device));
//cprintf("---index=%i\n",index);

mtable[index].start=0;
mtable[index].size=ide[hwif].pdisk[drv]->pd_size;
mtable[index].used=1;
sprintf(name,"hd%c",hwif*2+drv+'a');

bdev_register_minor(device,name,FS_DEFAULT);

lodsk_scan(device,
_callback,
(void*)&device,
ide_showinfo_flag,
name);

printk2("END");
return 0;
}

Subversion Repositories shark

(root)/shark/trunk/drivers/block/ide.c @ 45 - Rev 3