Subversion Repositories shark

Rev

Rev 2 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * Project: S.Ha.R.K.
 *
 * Coordinators:
 *   Giorgio Buttazzo    <giorgio@sssup.it>
 *   Paolo Gai           <pj@gandalf.sssup.it>
 *
 * Authors     :
 *   Paolo Gai           <pj@gandalf.sssup.it>
 *   Massimiliano Giorgi <massy@gandalf.sssup.it>
 *   Luca Abeni          <luca@gandalf.sssup.it>
 *   (see the web pages for full authors list)
 *
 * ReTiS Lab (Scuola Superiore S.Anna - Pisa - Italy)
 *
 * http://www.sssup.it
 * http://retis.sssup.it
 * http://shark.sssup.it
 */


/**
 ------------
 CVS :        $Id: 8042.h,v 1.1.1.1 2002-03-29 14:12:49 pj Exp $

 File:        $File$
 Revision:    $Revision: 1.1.1.1 $
 Last update: $Date: 2002-03-29 14:12:49 $
 ------------

 8042.h

 Interface between high level drivers
 and the 8042 keyboard and PS/2 mouse controller

 Revision:    1.0
 Last update: 22/Mar/1999

 Created by Massimiliano Giorgi, modified by Paolo Gai to support the
 kernel 4.0.0

**/


/*
 * Copyright (C) 2000 Paolo Gai
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */



#ifndef __8042_H__
#define __8042_H__

#define C8042_KEYBOARDIRQ  1
#define C8042_PS2IRQ      12

/*
 * init, enable, disable, get data for the keyboard
 */

int C8042_keyboardinit(PID task);
int C8042_keyboarddisable(void);
int C8042_keyboardenable(void);
int C8042_keyboardget(BYTE *data,BYTE access);

/*
 * init, enable, disable, get data for the ps/2 mouse (auxiliary port)
 */

int C8042_auxinit(PID task);
int C8042_auxportdisable(void);
int C8042_auxportenable(void);
int C8042_auxget(BYTE *data,BYTE access);
int C8042_auxend(void);

/* test if there is a PS/2 mouse on the aux port */
int C8042_ps2mousepresent(void);

/*
 * keyboard led controll
 */

void C8042_keyboardleds(BYTE numlock, BYTE cps, BYTE scrolllock);

/*
 *
 * from Linux OS kernel 2.2.2
 * (see GPL license)
 * with some modification
 */


/*
 *      Keyboard Controller Registers
 */


#define KBD_STATUS_REG          0x64    /* Status register (R) */
#define KBD_CNTL_REG            0x64    /* Controller command register (W) */
#define KBD_DATA_REG            0x60    /* Keyboard data register (R/W) */

/*
 *      Keyboard Controller Commands
 */


#define KBD_CCMD_READ_MODE      0x20    /* Read mode bits */
#define KBD_CCMD_WRITE_MODE     0x60    /* Write mode bits */
#define KBD_CCMD_GET_VERSION    0xA1    /* Get controller version */
#define KBD_CCMD_MOUSE_DISABLE  0xA7    /* Disable mouse interface */
#define KBD_CCMD_MOUSE_ENABLE   0xA8    /* Enable mouse interface */
#define KBD_CCMD_TEST_MOUSE     0xA9    /* Mouse interface test */
#define KBD_CCMD_SELF_TEST      0xAA    /* Controller self test */
#define KBD_CCMD_KBD_TEST       0xAB    /* Keyboard interface test */
#define KBD_CCMD_KBD_DISABLE    0xAD    /* Keyboard interface disable */
#define KBD_CCMD_KBD_ENABLE     0xAE    /* Keyboard interface enable */
#define KBD_CCMD_WRITE_AUX_OBUF 0xD3    /* Write to output buffer as if
                                           initiated by the auxiliary device */
#define KBD_CCMD_WRITE_MOUSE    0xD4    /* Write the following byte to the mouse */

/* added by me (MG) */

#define KBD_CCMD_GET_MODE       0xCA    /* Get controller mode (AT or PS/2) */

#define KBD_CREPLY_PS2MODE      0x01    /* PS2 mode */
#define KBD_CREPLY_ATMODE       0x00    /* AT mode */
#define KBD_CREPLY_GETMODEMASK  0x01    /* mask value for CCMD_GET_MODE */

/*
 *      Keyboard Commands
 */


#define KBD_CMD_SET_LEDS        0xED    /* Set keyboard leds */
#define KBD_CMD_SET_RATE        0xF3    /* Set typematic rate */
#define KBD_CMD_ENABLE          0xF4    /* Enable scanning */
#define KBD_CMD_DISABLE         0xF5    /* Disable scanning */
#define KBD_CMD_RESET           0xFF    /* Reset */

/* added by me (MG) */
#define KBD_CMD_SET_ALL_TYPEMATIC 0xF7  /* Set all key typematic */

#define KBD_LED_NUMLOCK         0x02
#define KBD_LED_CAPSLOCK        0x04
#define KBD_LED_SCROLLLOCK      0x01

#define KBD_LED_MASK            0x07

/*
 *      Keyboard Replies
 */


#define KBD_REPLY_POR           0xAA    /* Power on reset */
#define KBD_REPLY_ACK           0xFA    /* Command ACK */
#define KBD_REPLY_RESEND        0xFE    /* Command NACK, send the cmd again */

/* added by me (MG) */
#define KBD_REPLY_KISTOK        0x00    /* Keyboard Interface Self Test OK */
#define KBD_REPLY_CSTOK         0x55    /* Controller self test OK */
#define KBD_REPLY_MISTOK        0x00    /* Mouse Interface Self Test OK */

/*
 *      Status Register Bits
 */


#define KBD_STAT_OBF            0x01    /* Keyboard output buffer full */
#define KBD_STAT_IBF            0x02    /* Keyboard input buffer full */
#define KBD_STAT_SELFTEST       0x04    /* Self test successful */
#define KBD_STAT_CMD            0x08    /* Last write was a command write (0=data) */
#define KBD_STAT_UNLOCKED       0x10    /* Zero if keyboard locked */
#define KBD_STAT_MOUSE_OBF      0x20    /* Mouse output buffer full */
#define KBD_STAT_GTO            0x40    /* General receive/xmit timeout */
#define KBD_STAT_PERR           0x80    /* Parity error */

#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)

/*
 *      Controller Mode Register Bits
 */


#define KBD_MODE_KBD_INT        0x01    /* Keyboard data generate IRQ1 */
#define KBD_MODE_MOUSE_INT      0x02    /* Mouse data generate IRQ12 */
#define KBD_MODE_SYS            0x04    /* The system flag (?) */
#define KBD_MODE_NO_KEYLOCK     0x08    /* The keylock doesn't affect the keyboard if set */
#define KBD_MODE_DISABLE_KBD    0x10    /* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE  0x20    /* Disable mouse interface */
#define KBD_MODE_KCC            0x40    /* Scan code conversion to PC format */
#define KBD_MODE_RFU            0x80

/*
 *      Mouse Commands
 */


#define AUX_SET_RES             0xE8    /* Set resolution */
#define AUX_SET_SCALE11         0xE6    /* Set 1:1 scaling */
#define AUX_SET_SCALE21         0xE7    /* Set 2:1 scaling */
#define AUX_GET_SCALE           0xE9    /* Get scaling factor */
#define AUX_SET_STREAM          0xEA    /* Set stream mode */
#define AUX_SET_SAMPLE          0xF3    /* Set sample rate */
#define AUX_ENABLE_DEV          0xF4    /* Enable aux device */
#define AUX_DISABLE_DEV         0xF5    /* Disable aux device */
#define AUX_RESET               0xFF    /* Reset aux device */
#define AUX_ACK                 0xFA    /* Command byte ACK. */

#define AUX_BUF_SIZE            2048    /* This might be better divisible by
                                           three to make overruns stay in sync
                                           but then the read function would
                                           need
                                           */

#endif