Go to most recent revision |
Blame |
Compare with Previous |
Last modification |
View Log
| RSS feed
#ifndef __SAA7146__
#define __SAA7146__
#include <linux/version.h> /* for version macros */
#include <linux/module.h> /* for module-version */
#include <linux/delay.h> /* for delay-stuff */
#include <linux/slab.h> /* for kmalloc/kfree */
#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
#include <linux/init.h> /* for "__init" */
#include <linux/interrupt.h> /* for IMMEDIATE_BH */
#include <linux/kmod.h> /* for kernel module loader */
#include <linux/i2c.h> /* for i2c subsystem */
#include <asm/io.h> /* for accessing devices */
#include <linux/stringify.h>
#include <linux/vmalloc.h> /* for vmalloc() */
#include <linux/mm.h> /* for vmalloc_to_page() */
/* ugly, but necessary to build the dvb stuff under 2.4. */
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,51)
#include "dvb_functions.h"
#endif
#define SAA7146_VERSION_CODE KERNEL_VERSION(0,5,0)
#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr)))
#define saa7146_read(sxy,adr) readl(sxy->mem+(adr))
extern unsigned int saa7146_debug;
//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),__stringify(KBUILD_MODNAME),__FUNCTION__)
#ifndef DEBUG_VARIABLE
#define DEBUG_VARIABLE saa7146_debug
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,51)
#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_BASENAME),__FUNCTION__)
#define INFO(x) { printk("%s: ",__stringify(KBUILD_BASENAME)); printk x; }
#else
#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_MODNAME),__FUNCTION__)
#define INFO(x) { printk("%s: ",__stringify(KBUILD_MODNAME)); printk x; }
#endif
#define ERR(x) { DEBUG_PROLOG; printk x; }
#define DEB_S(x) if (0!=(DEBUG_VARIABLE&0x01)) { DEBUG_PROLOG; printk x; } /* simple debug messages */
#define DEB_D(x) if (0!=(DEBUG_VARIABLE&0x02)) { DEBUG_PROLOG; printk x; } /* more detailed debug messages */
#define DEB_EE(x) if (0!=(DEBUG_VARIABLE&0x04)) { DEBUG_PROLOG; printk x; } /* print enter and exit of functions */
#define DEB_I2C(x) if (0!=(DEBUG_VARIABLE&0x08)) { DEBUG_PROLOG; printk x; } /* i2c debug messages */
#define DEB_VBI(x) if (0!=(DEBUG_VARIABLE&0x10)) { DEBUG_PROLOG; printk x; } /* vbi debug messages */
#define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */
#define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */
#define IER_DISABLE(x,y) \
saa7146_write(x, IER, saa7146_read(x, IER) & ~(y));
#define IER_ENABLE(x,y) \
saa7146_write(x, IER, saa7146_read(x, IER) | (y));
struct saa7146_dev;
struct saa7146_extension;
struct saa7146_vv;
/* saa7146 page table */
struct saa7146_pgtable {
unsigned int size;
u32 *cpu;
dma_addr_t dma;
/* used for offsets for u,v planes for planar capture modes */
unsigned long offset;
};
struct saa7146_pci_extension_data {
struct saa7146_extension *ext;
void *ext_priv; /* most likely a name string */
};
#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \
{ \
.vendor = PCI_VENDOR_ID_PHILIPS, \
.device = PCI_DEVICE_ID_PHILIPS_SAA7146, \
.subvendor = x_vendor, \
.subdevice = x_device, \
.driver_data = (unsigned long)& x_var, \
}
struct saa7146_extension
{
char name[32]; /* name of the device */
#define SAA7146_USE_I2C_IRQ 0x1
int flags;
/* pairs of subvendor and subdevice ids for
supported devices, last entry 0xffff, 0xfff */
struct module *module;
struct pci_driver driver;
struct pci_device_id *pci_tbl;
/* extension functions */
int (*probe)(struct saa7146_dev *);
int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
int (*detach)(struct saa7146_dev*);
u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */
void (*irq_func)(struct saa7146_dev*, u32* irq_mask);
};
struct saa7146_dma
{
dma_addr_t dma_handle;
u32 *cpu_addr;
};
struct saa7146_dev
{
struct module *module;
struct list_head item;
/* different device locks */
spinlock_t slock;
struct semaphore lock;
unsigned char *mem; /* pointer to mapped IO memory */
int revision; /* chip revision; needed for bug-workarounds*/
/* pci-device & irq stuff*/
char name[32];
struct pci_dev *pci;
u32 int_todo;
spinlock_t int_slock;
/* extension handling */
struct saa7146_extension *ext; /* indicates if handled by extension */
void *ext_priv; /* pointer for extension private use (most likely some private data) */
struct saa7146_ext_vv *ext_vv_data;
/* per device video/vbi informations (if available) */
struct saa7146_vv *vv_data;
void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
/* i2c-stuff */
struct semaphore i2c_lock;
u32 i2c_bitrate;
struct saa7146_dma d_i2c; /* pointer to i2c memory */
wait_queue_head_t i2c_wq;
int i2c_op;
/* memories */
struct saa7146_dma d_rps0;
struct saa7146_dma d_rps1;
};
/* from saa7146_i2c.c */
int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
int saa7146_i2c_transfer(struct saa7146_dev *saa, const struct i2c_msg msgs[], int num, int retries);
/* from saa7146_core.c */
extern struct list_head saa7146_devices;
extern struct semaphore saa7146_devices_lock;
int saa7146_register_extension(struct saa7146_extension*);
int saa7146_unregister_extension(struct saa7146_extension*);
struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc);
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
void saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
char *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
/* some memory sizes */
#define SAA7146_I2C_MEM ( 1*PAGE_SIZE)
#define SAA7146_RPS_MEM ( 1*PAGE_SIZE)
/* some i2c constants */
#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */
#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */
#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */
/* unsorted defines */
#define ME1 0x0000000800
#define PV1 0x0000000008
/* gpio defines */
#define SAA7146_GPIO_INPUT 0x00
#define SAA7146_GPIO_IRQHI 0x10
#define SAA7146_GPIO_IRQLO 0x20
#define SAA7146_GPIO_IRQHL 0x30
#define SAA7146_GPIO_OUTLO 0x40
#define SAA7146_GPIO_OUTHI 0x50
/* define for the register programming sequencer (rps) */
#define CMD_NOP 0x00000000 /* No operation */
#define CMD_CLR_EVENT 0x00000000 /* Clear event */
#define CMD_SET_EVENT 0x10000000 /* Set signal event */
#define CMD_PAUSE 0x20000000 /* Pause */
#define CMD_CHECK_LATE 0x30000000 /* Check late */
#define CMD_UPLOAD 0x40000000 /* Upload */
#define CMD_STOP 0x50000000 /* Stop */
#define CMD_INTERRUPT 0x60000000 /* Interrupt */
#define CMD_JUMP 0x80000000 /* Jump */
#define CMD_WR_REG 0x90000000 /* Write (load) register */
#define CMD_RD_REG 0xa0000000 /* Read (store) register */
#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */
#define CMD_OAN MASK_27
#define CMD_INV MASK_26
#define CMD_SIG4 MASK_25
#define CMD_SIG3 MASK_24
#define CMD_SIG2 MASK_23
#define CMD_SIG1 MASK_22
#define CMD_SIG0 MASK_21
#define CMD_O_FID_B MASK_14
#define CMD_E_FID_B MASK_13
#define CMD_O_FID_A MASK_12
#define CMD_E_FID_A MASK_11
/* some events and command modifiers for rps1 squarewave generator */
#define EVT_HS (1<<15) // Source Line Threshold reached
#define EVT_VBI_B (1<<9) // VSYNC Event
#define RPS_OAN (1<<27) // 1: OR events, 0: AND events
#define RPS_INV (1<<26) // Invert (compound) event
#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits
/* Bit mask constants */
#define MASK_00 0x00000001 /* Mask value for bit 0 */
#define MASK_01 0x00000002 /* Mask value for bit 1 */
#define MASK_02 0x00000004 /* Mask value for bit 2 */
#define MASK_03 0x00000008 /* Mask value for bit 3 */
#define MASK_04 0x00000010 /* Mask value for bit 4 */
#define MASK_05 0x00000020 /* Mask value for bit 5 */
#define MASK_06 0x00000040 /* Mask value for bit 6 */
#define MASK_07 0x00000080 /* Mask value for bit 7 */
#define MASK_08 0x00000100 /* Mask value for bit 8 */
#define MASK_09 0x00000200 /* Mask value for bit 9 */
#define MASK_10 0x00000400 /* Mask value for bit 10 */
#define MASK_11 0x00000800 /* Mask value for bit 11 */
#define MASK_12 0x00001000 /* Mask value for bit 12 */
#define MASK_13 0x00002000 /* Mask value for bit 13 */
#define MASK_14 0x00004000 /* Mask value for bit 14 */
#define MASK_15 0x00008000 /* Mask value for bit 15 */
#define MASK_16 0x00010000 /* Mask value for bit 16 */
#define MASK_17 0x00020000 /* Mask value for bit 17 */
#define MASK_18 0x00040000 /* Mask value for bit 18 */
#define MASK_19 0x00080000 /* Mask value for bit 19 */
#define MASK_20 0x00100000 /* Mask value for bit 20 */
#define MASK_21 0x00200000 /* Mask value for bit 21 */
#define MASK_22 0x00400000 /* Mask value for bit 22 */
#define MASK_23 0x00800000 /* Mask value for bit 23 */
#define MASK_24 0x01000000 /* Mask value for bit 24 */
#define MASK_25 0x02000000 /* Mask value for bit 25 */
#define MASK_26 0x04000000 /* Mask value for bit 26 */
#define MASK_27 0x08000000 /* Mask value for bit 27 */
#define MASK_28 0x10000000 /* Mask value for bit 28 */
#define MASK_29 0x20000000 /* Mask value for bit 29 */
#define MASK_30 0x40000000 /* Mask value for bit 30 */
#define MASK_31 0x80000000 /* Mask value for bit 31 */
#define MASK_B0 0x000000ff /* Mask value for byte 0 */
#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */
#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */
#define MASK_B3 0xff000000 /* Mask value for byte 3 */
#define MASK_W0 0x0000ffff /* Mask value for word 0 */
#define MASK_W1 0xffff0000 /* Mask value for word 1 */
#define MASK_PA 0xfffffffc /* Mask value for physical address */
#define MASK_PR 0xfffffffe /* Mask value for protection register */
#define MASK_ER 0xffffffff /* Mask value for the entire register */
#define MASK_NONE 0x00000000 /* No mask */
/* register aliases */
#define BASE_ODD1 0x00 /* Video DMA 1 registers */
#define BASE_EVEN1 0x04
#define PROT_ADDR1 0x08
#define PITCH1 0x0C
#define BASE_PAGE1 0x10 /* Video DMA 1 base page */
#define NUM_LINE_BYTE1 0x14
#define BASE_ODD2 0x18 /* Video DMA 2 registers */
#define BASE_EVEN2 0x1C
#define PROT_ADDR2 0x20
#define PITCH2 0x24
#define BASE_PAGE2 0x28 /* Video DMA 2 base page */
#define NUM_LINE_BYTE2 0x2C
#define BASE_ODD3 0x30 /* Video DMA 3 registers */
#define BASE_EVEN3 0x34
#define PROT_ADDR3 0x38
#define PITCH3 0x3C
#define BASE_PAGE3 0x40 /* Video DMA 3 base page */
#define NUM_LINE_BYTE3 0x44
#define PCI_BT_V1 0x48 /* Video/FIFO 1 */
#define PCI_BT_V2 0x49 /* Video/FIFO 2 */
#define PCI_BT_V3 0x4A /* Video/FIFO 3 */
#define PCI_BT_DEBI 0x4B /* DEBI */
#define PCI_BT_A 0x4C /* Audio */
#define DD1_INIT 0x50 /* Init setting of DD1 interface */
#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */
#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */
#define BRS_CTRL 0x58 /* BRS control register */
#define HPS_CTRL 0x5C /* HPS control register */
#define HPS_V_SCALE 0x60 /* HPS vertical scale */
#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */
#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */
#define HPS_H_SCALE 0x6C /* HPS horizontal scale */
#define BCS_CTRL 0x70 /* BCS control */
#define CHROMA_KEY_RANGE 0x74
#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */
#define DEBI_CONFIG 0x7C
#define DEBI_COMMAND 0x80
#define DEBI_PAGE 0x84
#define DEBI_AD 0x88
#define I2C_TRANSFER 0x8C
#define I2C_STATUS 0x90
#define BASE_A1_IN 0x94 /* Audio 1 input DMA */
#define PROT_A1_IN 0x98
#define PAGE_A1_IN 0x9C
#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */
#define PROT_A1_OUT 0xA4
#define PAGE_A1_OUT 0xA8
#define BASE_A2_IN 0xAC /* Audio 2 input DMA */
#define PROT_A2_IN 0xB0
#define PAGE_A2_IN 0xB4
#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */
#define PROT_A2_OUT 0xBC
#define PAGE_A2_OUT 0xC0
#define RPS_PAGE0 0xC4 /* RPS task 0 page register */
#define RPS_PAGE1 0xC8 /* RPS task 1 page register */
#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */
#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */
#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */
#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */
#define IER 0xDC /* Interrupt enable register */
#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */
#define EC1SSR 0xE4 /* Event cnt set 1 source select */
#define EC2SSR 0xE8 /* Event cnt set 2 source select */
#define ECT1R 0xEC /* Event cnt set 1 thresholds */
#define ECT2R 0xF0 /* Event cnt set 2 thresholds */
#define ACON1 0xF4
#define ACON2 0xF8
#define MC1 0xFC /* Main control register 1 */
#define MC2 0x100 /* Main control register 2 */
#define RPS_ADDR0 0x104 /* RPS task 0 address register */
#define RPS_ADDR1 0x108 /* RPS task 1 address register */
#define ISR 0x10C /* Interrupt status register */
#define PSR 0x110 /* Primary status register */
#define SSR 0x114 /* Secondary status register */
#define EC1R 0x118 /* Event counter set 1 register */
#define EC2R 0x11C /* Event counter set 2 register */
#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */
#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */
#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */
#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */
#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */
#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */
#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */
#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */
#define LEVEL_REP 0x140,
#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */
#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */
/* isr masks */
#define SPCI_PPEF 0x80000000 /* PCI parity error */
#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */
#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */
#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */
#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */
#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */
#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */
#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */
#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */
#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */
#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */
#define SPCI_UPLD 0x00100000 /* RPS in upload */
#define SPCI_DEBI_S 0x00080000 /* DEBI status */
#define SPCI_DEBI_E 0x00040000 /* DEBI error */
#define SPCI_IIC_S 0x00020000 /* I2C status */
#define SPCI_IIC_E 0x00010000 /* I2C error */
#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */
#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */
#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */
#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */
#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */
#define SPCI_V_PE 0x00000400 /* Video protection address */
#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */
#define SPCI_FIDA 0x00000100 /* Field ID video port A */
#define SPCI_FIDB 0x00000080 /* Field ID video port B */
#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */
#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */
#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */
#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */
#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */
#define SPCI_EC3S 0x00000002 /* Event counter 3 */
#define SPCI_EC0S 0x00000001 /* Event counter 0 */
/* i2c */
#define SAA7146_I2C_ABORT (1<<7)
#define SAA7146_I2C_SPERR (1<<6)
#define SAA7146_I2C_APERR (1<<5)
#define SAA7146_I2C_DTERR (1<<4)
#define SAA7146_I2C_DRERR (1<<3)
#define SAA7146_I2C_AL (1<<2)
#define SAA7146_I2C_ERR (1<<1)
#define SAA7146_I2C_BUSY (1<<0)
#define SAA7146_I2C_START (0x3)
#define SAA7146_I2C_CONT (0x2)
#define SAA7146_I2C_STOP (0x1)
#define SAA7146_I2C_NOP (0x0)
#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500)
#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100)
#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400)
#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600)
#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700)
#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000)
#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200)
#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300)
#endif