Subversion Repositories shark

Rev

Blame | Last modification | View Log | RSS feed

/*
 * Copyright (c) 2001-2002 by David Brownell
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */



#ifdef __KERNEL__

/* This file contains declarations of usbcore internals that are mostly
 * used or exposed by Host Controller Drivers.
 */


/*
 * USB Packet IDs (PIDs)
 */

#define USB_PID_UNDEF_0                 0xf0
#define USB_PID_OUT                     0xe1
#define USB_PID_ACK                     0xd2
#define USB_PID_DATA0                   0xc3
#define USB_PID_PING                    0xb4    /* USB 2.0 */
#define USB_PID_SOF                     0xa5
#define USB_PID_NYET                    0x96    /* USB 2.0 */
#define USB_PID_DATA2                   0x87    /* USB 2.0 */
#define USB_PID_SPLIT                   0x78    /* USB 2.0 */
#define USB_PID_IN                      0x69
#define USB_PID_NAK                     0x5a
#define USB_PID_DATA1                   0x4b
#define USB_PID_PREAMBLE                0x3c    /* Token mode */
#define USB_PID_ERR                     0x3c    /* USB 2.0: handshake mode */
#define USB_PID_SETUP                   0x2d
#define USB_PID_STALL                   0x1e
#define USB_PID_MDATA                   0x0f    /* USB 2.0 */

/*-------------------------------------------------------------------------*/

/*
 * USB Host Controller Driver (usb_hcd) framework
 *
 * Since "struct usb_bus" is so thin, you can't share much code in it.
 * This framework is a layer over that, and should be more sharable.
 */


/*-------------------------------------------------------------------------*/

struct usb_hcd {        /* usb_bus.hcpriv points to this */

        /*
         * housekeeping
         */

        struct usb_bus          self;           /* hcd is-a bus */

        const char              *product_desc;  /* product/vendor string */
        const char              *description;   /* "ehci-hcd" etc */

        struct timer_list       rh_timer;       /* drives root hub */
        struct list_head        dev_list;       /* devices on this bus */
        struct work_struct      work;

        /*
         * hardware info/state
         */

        struct hc_driver        *driver;        /* hw-specific hooks */
        unsigned                saw_irq : 1;
        int                     irq;            /* irq allocated */
        void                    *regs;          /* device memory/io */
        struct device           *controller;    /* handle to hardware */

        /* a few non-PCI controllers exist, mostly for OHCI */
        struct pci_dev          *pdev;          /* pci is typical */
#ifdef  CONFIG_PCI
        int                     region;         /* pci region for regs */
        u32                     pci_state [16]; /* for PM state save */
#endif

#define HCD_BUFFER_POOLS        4
        struct pci_pool         *pool [HCD_BUFFER_POOLS];

        int                     state;
#       define  __ACTIVE                0x01
#       define  __SUSPEND               0x04
#       define  __TRANSIENT             0x80

#       define  USB_STATE_HALT          0
#       define  USB_STATE_RUNNING       (__ACTIVE)
#       define  USB_STATE_QUIESCING     (__SUSPEND|__TRANSIENT|__ACTIVE)
#       define  USB_STATE_RESUMING      (__SUSPEND|__TRANSIENT)
#       define  USB_STATE_SUSPENDED     (__SUSPEND)

#define HCD_IS_RUNNING(state) ((state) & __ACTIVE)
#define HCD_IS_SUSPENDED(state) ((state) & __SUSPEND)

        /* more shared queuing code would be good; it should support
         * smarter scheduling, handle transaction translators, etc;
         * input size of periodic table to an interrupt scheduler.
         * (ohci 32, uhci 1024, ehci 256/512/1024).
         */

};

/* 2.4 does this a bit differently ... */
static inline struct usb_bus *hcd_to_bus (struct usb_hcd *hcd)
{
        return &hcd->self;
}


struct hcd_dev {        /* usb_device.hcpriv points to this */
        struct list_head        dev_list;       /* on this hcd */
        struct list_head        urb_list;       /* pending on this dev */

        /* per-configuration HC/HCD state, such as QH or ED */
        void                    *ep[32];
};

// urb.hcpriv is really hardware-specific

struct hcd_timeout {    /* timeouts we allocate */
        struct list_head        timeout_list;
        struct timer_list       timer;
};

/*-------------------------------------------------------------------------*/

/*
 * FIXME usb_operations should vanish or become hc_driver,
 * when usb_bus and usb_hcd become the same thing.
 */


struct usb_operations {
        int (*allocate)(struct usb_device *);
        int (*deallocate)(struct usb_device *);
        int (*get_frame_number) (struct usb_device *usb_dev);
        int (*submit_urb) (struct urb *urb, int mem_flags);
        int (*unlink_urb) (struct urb *urb);

        /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
        void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
                        int mem_flags,
                        dma_addr_t *dma);
        void (*buffer_free)(struct usb_bus *bus, size_t size,
                        void *addr, dma_addr_t dma);

        void (*disable)(struct usb_device *udev, int bEndpointAddress);
};

/* each driver provides one of these, and hardware init support */

struct pt_regs;

struct hc_driver {
        const char      *description;   /* "ehci-hcd" etc */

        /* irq handler */
        void    (*irq) (struct usb_hcd *hcd, struct pt_regs *regs);

        int     flags;
#define HCD_MEMORY      0x0001          /* HC regs use memory (else I/O) */
#define HCD_USB11       0x0010          /* USB 1.1 */
#define HCD_USB2        0x0020          /* USB 2.0 */

        /* called to init HCD and root hub */
        int     (*reset) (struct usb_hcd *hcd);
        int     (*start) (struct usb_hcd *hcd);

        /* called after all devices were suspended */
        int     (*suspend) (struct usb_hcd *hcd, u32 state);

        /* called before any devices get resumed */
        int     (*resume) (struct usb_hcd *hcd);

        /* cleanly make HCD stop writing memory and doing I/O */
        void    (*stop) (struct usb_hcd *hcd);

        /* return current frame number */
        int     (*get_frame_number) (struct usb_hcd *hcd);

        /* memory lifecycle */
        struct usb_hcd  *(*hcd_alloc) (void);
        void            (*hcd_free) (struct usb_hcd *hcd);

        /* manage i/o requests, device state */
        int     (*urb_enqueue) (struct usb_hcd *hcd, struct urb *urb,
                                        int mem_flags);
        int     (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);

        /* hw synch, freeing endpoint resources that urb_dequeue can't */
        void    (*endpoint_disable)(struct usb_hcd *hcd,
                        struct hcd_dev *dev, int bEndpointAddress);

        /* root hub support */
        int             (*hub_status_data) (struct usb_hcd *hcd, char *buf);
        int             (*hub_control) (struct usb_hcd *hcd,
                                u16 typeReq, u16 wValue, u16 wIndex,
                                char *buf, u16 wLength);
};

extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs);
extern void usb_bus_init (struct usb_bus *bus);
extern void usb_rh_status_dequeue (struct usb_hcd *hcd, struct urb *urb);

#ifdef CONFIG_PCI
struct pci_dev;
struct pci_device_id;
extern int usb_hcd_pci_probe (struct pci_dev *dev,
                                const struct pci_device_id *id);
extern void usb_hcd_pci_remove (struct pci_dev *dev);

#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state);
extern int usb_hcd_pci_resume (struct pci_dev *dev);
#endif /* CONFIG_PM */

#endif /* CONFIG_PCI */

/* pci-ish (pdev null is ok) buffer alloc/mapping support */
int hcd_buffer_create (struct usb_hcd *hcd);
void hcd_buffer_destroy (struct usb_hcd *hcd);

void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
        int mem_flags, dma_addr_t *dma);
void hcd_buffer_free (struct usb_bus *bus, size_t size,
        void *addr, dma_addr_t dma);

/* generic bus glue, needed for host controllers that don't use PCI */
extern struct usb_operations usb_hcd_operations;
extern irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs *r);
extern void usb_hc_died (struct usb_hcd *hcd);

/* -------------------------------------------------------------------------- */

/* Enumeration is only for the hub driver, or HCD virtual root hubs */
extern int usb_new_device(struct usb_device *dev, struct device *parent);
extern void usb_choose_address(struct usb_device *dev);
extern void usb_disconnect(struct usb_device **);

/* exported to hub driver ONLY to support usb_reset_device () */
extern int usb_get_configuration(struct usb_device *dev);
extern void usb_destroy_configuration(struct usb_device *dev);
extern int usb_set_address(struct usb_device *dev);

/* use these only before the device's address has been set */
#define usb_snddefctrl(dev)             ((PIPE_CONTROL << 30))
#define usb_rcvdefctrl(dev)             ((PIPE_CONTROL << 30) | USB_DIR_IN)

/*-------------------------------------------------------------------------*/

/*
 * HCD Root Hub support
 */


#include "hub.h"

/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
#define DeviceRequest \
        ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)

#define DeviceOutRequest \
        ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)


#define InterfaceRequest \
        ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)


#define EndpointRequest \
        ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)

#define EndpointOutRequest \
        ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)


/* table 9.6 standard features */
#define DEVICE_REMOTE_WAKEUP    1
#define ENDPOINT_HALT           0

/* class requests from the USB 2.0 hub spec, table 11-15 */
/* GetBusState and SetHubDescriptor are optional, omitted */
#define ClearHubFeature         (0x2000 | USB_REQ_CLEAR_FEATURE)
#define ClearPortFeature        (0x2300 | USB_REQ_CLEAR_FEATURE)
#define GetHubDescriptor        (0xa000 | USB_REQ_GET_DESCRIPTOR)
#define GetHubStatus            (0xa000 | USB_REQ_GET_STATUS)
#define GetPortStatus           (0xa300 | USB_REQ_GET_STATUS)
#define SetHubFeature           (0x2000 | USB_REQ_SET_FEATURE)
#define SetPortFeature          (0x2300 | USB_REQ_SET_FEATURE)


/*-------------------------------------------------------------------------*/

/*
 * Generic bandwidth allocation constants/support
 */

#define FRAME_TIME_USECS        1000L
#define BitTime(bytecount)  (7 * 8 * bytecount / 6)  /* with integer truncation */
                /* Trying not to use worst-case bit-stuffing
                   of (7/6 * 8 * bytecount) = 9.33 * bytecount */

                /* bytecount = data payload byte count */

#define NS_TO_US(ns)    ((ns + 500L) / 1000L)
                        /* convert & round nanoseconds to microseconds */

extern void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb,
                int bustime, int isoc);
extern void usb_release_bandwidth (struct usb_device *dev, struct urb *urb,
                int isoc);

/*
 * Full/low speed bandwidth allocation constants/support.
 */

#define BW_HOST_DELAY   1000L           /* nanoseconds */
#define BW_HUB_LS_SETUP 333L            /* nanoseconds */
                        /* 4 full-speed bit times (est.) */

#define FRAME_TIME_BITS         12000L          /* frame = 1 millisecond */
#define FRAME_TIME_MAX_BITS_ALLOC       (90L * FRAME_TIME_BITS / 100L)
#define FRAME_TIME_MAX_USECS_ALLOC      (90L * FRAME_TIME_USECS / 100L)

extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);

/*
 * Ceiling microseconds (typical) for that many bytes at high speed
 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
 * to preallocate bandwidth)
 */

#define USB2_HOST_DELAY 5       /* nsec, guess */
#define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
        + ((2083UL * (3167 + BitTime (bytes)))/1000) \
        + USB2_HOST_DELAY)

#define HS_USECS_ISO(bytes) NS_TO_US ( ((long)(38 * 8 * 2.083)) \
        + ((2083UL * (3167 + BitTime (bytes)))/1000) \
        + USB2_HOST_DELAY)


extern long usb_calc_bus_time (int speed, int is_input,
                        int isoc, int bytecount);

/*-------------------------------------------------------------------------*/

extern struct usb_bus *usb_alloc_bus (struct usb_operations *);

extern int usb_register_bus (struct usb_bus *);
extern void usb_deregister_bus (struct usb_bus *);

extern int usb_register_root_hub (struct usb_device *usb_dev,
                struct device *parent_dev);

/* for portability to 2.4, hcds should call this */
static inline int hcd_register_root (struct usb_hcd *hcd)
{
        return usb_register_root_hub (
                hcd_to_bus (hcd)->root_hub, hcd->controller);
}

/*-------------------------------------------------------------------------*/

/* exported only within usbcore */

extern struct list_head usb_bus_list;
extern struct semaphore usb_bus_list_lock;

extern struct usb_bus *usb_bus_get (struct usb_bus *bus);
extern void usb_bus_put (struct usb_bus *bus);

extern int usb_find_interface_driver (struct usb_device *dev,
        struct usb_interface *interface);

#define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))

#define usb_endpoint_out(ep_dir)        (!((ep_dir) & USB_DIR_IN))

/*
 * USB device fs stuff
 */


#ifdef CONFIG_USB_DEVICEFS

/*
 * these are expected to be called from the USB core/hub thread
 * with the kernel lock held
 */

extern void usbfs_add_bus(struct usb_bus *bus);
extern void usbfs_remove_bus(struct usb_bus *bus);
extern void usbfs_add_device(struct usb_device *dev);
extern void usbfs_remove_device(struct usb_device *dev);
extern void usbfs_update_special (void);

extern int usbfs_init(void);
extern void usbfs_cleanup(void);

#else /* CONFIG_USB_DEVICEFS */

static inline void usbfs_add_bus(struct usb_bus *bus) {}
static inline void usbfs_remove_bus(struct usb_bus *bus) {}
static inline void usbfs_add_device(struct usb_device *dev) {}
static inline void usbfs_remove_device(struct usb_device *dev) {}
static inline void usbfs_update_special (void) {}

static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }

#endif /* CONFIG_USB_DEVICEFS */

/*-------------------------------------------------------------------------*/

/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
// bleech -- resurfaced in 2.4.11 or 2.4.12
#define bitmap  DeviceRemovable


/*-------------------------------------------------------------------------*/

/* random stuff */

#define RUN_CONTEXT (in_irq () ? "in_irq" \
                : (in_interrupt () ? "in_interrupt" : "can sleep"))



#endif /* __KERNEL__ */